Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/imx', 'spi/fix/omap2-mcspi', 'spi/fix/ti-qspi' and 'spi/fix/xilinx' into spi-linus

drivers/spi/spi-atmel.c

@@ -773,7 +773,8 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
 
 	*plen = len;
 
-	if (atmel_spi_dma_slave_config(as, &slave_config, 8))
+	if (atmel_spi_dma_slave_config(as, &slave_config,
+				       xfer->bits_per_word))
 		goto err_exit;
 
 	/* Send both scatterlists */

drivers/spi/spi-imx.c

@@ -336,13 +336,20 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 
 	if (config->mode & SPI_CPHA)
 		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
+	else
+		cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
 
 	if (config->mode & SPI_CPOL) {
 		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
 		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
+	} else {
+		cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
+		cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
 	}
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
+	else
+		cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 	writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);

drivers/spi/spi-omap2-mcspi.c

@@ -1217,6 +1217,33 @@ out:
 	return status;
 }
 
+static int omap2_mcspi_prepare_message(struct spi_master *master,
+				       struct spi_message *msg)
+{
+	struct omap2_mcspi	*mcspi = spi_master_get_devdata(master);
+	struct omap2_mcspi_regs	*ctx = &mcspi->ctx;
+	struct omap2_mcspi_cs	*cs;
+
+	/* Only a single channel can have the FORCE bit enabled
+	 * in its chconf0 register.
+	 * Scan all channels and disable them except the current one.
+	 * A FORCE can remain from a last transfer having cs_change enabled
+	 */
+	list_for_each_entry(cs, &ctx->cs, node) {
+		if (msg->spi->controller_state == cs)
+			continue;
+
+		if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE)) {
+			cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
+			writel_relaxed(cs->chconf0,
+					cs->base + OMAP2_MCSPI_CHCONF0);
+			readl_relaxed(cs->base + OMAP2_MCSPI_CHCONF0);
+		}
+	}
+
+	return 0;
+}
+
 static int omap2_mcspi_transfer_one(struct spi_master *master,
 		struct spi_device *spi, struct spi_transfer *t)
 {
@@ -1344,6 +1371,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
 	master->setup = omap2_mcspi_setup;
 	master->auto_runtime_pm = true;
+	master->prepare_message = omap2_mcspi_prepare_message;
 	master->transfer_one = omap2_mcspi_transfer_one;
 	master->set_cs = omap2_mcspi_set_cs;
 	master->cleanup = omap2_mcspi_cleanup;

drivers/spi/spi-ti-qspi.c

@@ -410,11 +410,10 @@ static int ti_qspi_start_transfer_one(struct spi_master *master,
 
 	mutex_unlock(&qspi->list_lock);
 
+	ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG);
 	m->status = status;
 	spi_finalize_current_message(master);
 
-	ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG);
-
 	return status;
 }
 

drivers/spi/spi-xilinx.c

@@ -270,6 +270,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 
 	while (remaining_words) {
 		int n_words, tx_words, rx_words;
+		u32 sr;
 
 		n_words = min(remaining_words, xspi->buffer_size);
 
@@ -284,24 +285,33 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 		if (use_irq) {
 			xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
 			wait_for_completion(&xspi->done);
-		} else
-			while (!(xspi->read_fn(xspi->regs + XSPI_SR_OFFSET) &
-						XSPI_SR_TX_EMPTY_MASK))
-				;
-
-		/* A transmit has just completed. Process received data and
-		 * check for more data to transmit. Always inhibit the
-		 * transmitter while the Isr refills the transmit register/FIFO,
-		 * or make sure it is stopped if we're done.
-		 */
-		if (use_irq)
+			/* A transmit has just completed. Process received data
+			 * and check for more data to transmit. Always inhibit
+			 * the transmitter while the Isr refills the transmit
+			 * register/FIFO, or make sure it is stopped if we're
+			 * done.
+			 */
 			xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
-			       xspi->regs + XSPI_CR_OFFSET);
+				       xspi->regs + XSPI_CR_OFFSET);
+			sr = XSPI_SR_TX_EMPTY_MASK;
+		} else
+			sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
 
 		/* Read out all the data from the Rx FIFO */
 		rx_words = n_words;
-		while (rx_words--)
-			xilinx_spi_rx(xspi);
+		while (rx_words) {
+			if ((sr & XSPI_SR_TX_EMPTY_MASK) && (rx_words > 1)) {
+				xilinx_spi_rx(xspi);
+				rx_words--;
+				continue;
+			}
+
+			sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
+			if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
+				xilinx_spi_rx(xspi);
+				rx_words--;
+			}
+		}
 
 		remaining_words -= n_words;
 	}