ARM: dts: imx25-pinfunc: Add several pinfunctions
This patch adds some not yet defined pinfunctions. It also adds two comments about mistakes in the i.MX25 reference manual so it is easier to spot the difference between reference manual and pinfunction definitions. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Markus Pargmann
Shawn Guo
Родитель
53f643d23b
Коммит
5c5506bdaf
|
|
@ -154,20 +154,25 @@
|
|||
#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
|
||||
#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
|
||||
#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
|
||||
#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000
|
||||
|
||||
#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
|
||||
#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
|
||||
#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
|
||||
#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000
|
||||
|
||||
#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
|
||||
#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
|
||||
#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
|
||||
#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000
|
||||
|
||||
#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
|
||||
#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
|
||||
#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000
|
||||
|
||||
#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
|
||||
#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
|
||||
#define MX25_PAD_D11__USBOTG_PWR 0x098 0x290 0x000 0x06 0x000
|
||||
|
||||
#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000
|
||||
#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000
|
||||
|
|
@ -233,26 +238,33 @@
|
|||
|
||||
#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
|
||||
#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
|
||||
|
||||
#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
|
||||
#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
|
||||
|
||||
#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001
|
||||
|
||||
#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
|
||||
#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
|
||||
|
||||
#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
|
||||
#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001
|
||||
|
||||
#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000
|
||||
#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000
|
||||
|
||||
#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000
|
||||
#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000
|
||||
|
||||
#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000
|
||||
#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000
|
||||
#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001
|
||||
|
||||
#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000
|
||||
|
|
@ -265,6 +277,7 @@
|
|||
#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000
|
||||
|
||||
#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000
|
||||
#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000
|
||||
#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000
|
||||
|
||||
#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000
|
||||
|
|
@ -278,26 +291,31 @@
|
|||
|
||||
#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
|
||||
#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001
|
||||
#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
|
||||
#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
|
||||
#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
|
||||
|
||||
#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
|
||||
#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000
|
||||
#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000
|
||||
#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
|
||||
#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
|
||||
|
||||
#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000
|
||||
#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001
|
||||
#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000
|
||||
#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000
|
||||
#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000
|
||||
|
||||
#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000
|
||||
#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000
|
||||
#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000
|
||||
#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000
|
||||
#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000
|
||||
|
||||
#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000
|
||||
#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001
|
||||
#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
|
||||
#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000
|
||||
|
||||
#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000
|
||||
|
|
@ -476,9 +494,18 @@
|
|||
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000
|
||||
|
||||
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000
|
||||
/*
|
||||
* According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
|
||||
* 01/2011) this is CAN1_TX but that's wrong.
|
||||
*/
|
||||
#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000
|
||||
#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000
|
||||
|
||||
#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000
|
||||
/*
|
||||
* According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
|
||||
* 01/2011) this is CAN1_RX but that's wrong.
|
||||
*/
|
||||
#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000
|
||||
#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000
|
||||
|
||||
|
|
@ -514,10 +541,12 @@
|
|||
#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002
|
||||
#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000
|
||||
#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000
|
||||
#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002
|
||||
|
||||
#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000
|
||||
#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000
|
||||
#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000
|
||||
#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000
|
||||
|
||||
#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
|
||||
#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче