ppc/pmac: remove ppc_ide_md hooks

* Add pmac_ide_init_ports() helper and use it instead of
  pmac_ide_init_hwif_ports().

* Remove ppc_ide_md hooks - no need for them
  (IDE pmac host driver takes care of all this setup).

* Then remove no longer needed <linux/ide.h> include
  from arch/powerpc/platforms/powermac/pmac.h.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2008-04-18 00:46:29 +02:00
Родитель e4f7f3a099
Коммит 5c58666fae
3 изменённых файлов: 11 добавлений и 52 удалений

Просмотреть файл

@ -2,7 +2,6 @@
#define __PMAC_H__
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/irq.h>
/*
@ -35,10 +34,6 @@ extern void pmac_check_ht_link(void);
extern void pmac_setup_smp(void);
extern unsigned long pmac_ide_get_base(int index);
extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
unsigned long data_port, unsigned long ctrl_port, int *irq);
extern int pmac_nvram_init(void);
extern void pmac_pic_init(void);

Просмотреть файл

@ -574,14 +574,6 @@ static int __init pmac_probe(void)
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 1;
DMA_MODE_WRITE = 2;
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
#ifdef CONFIG_BLK_DEV_IDE_PMAC
ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
ppc_ide_md.default_io_base = pmac_ide_get_base;
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PMAC_SMU

Просмотреть файл

@ -418,37 +418,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
/*
* N.B. this can't be an initfunc, because the media-bay task can
* call ide_[un]register at any time.
*/
void
pmac_ide_init_hwif_ports(hw_regs_t *hw,
unsigned long data_port, unsigned long ctrl_port,
int *irq)
{
int i, ix;
if (data_port == 0)
return;
for (ix = 0; ix < MAX_HWIFS; ++ix)
if (data_port == pmac_ide[ix].regbase)
break;
if (ix >= MAX_HWIFS)
return; /* not an IDE PMAC interface */
for (i = 0; i < 8; ++i)
hw->io_ports[i] = data_port + i * 0x10;
hw->io_ports[8] = data_port + 0x160;
if (irq != NULL)
*irq = pmac_ide[ix].irq;
hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
}
#define PMAC_IDE_REG(x) \
((void __iomem *)((drive)->hwif->io_ports[IDE_DATA_OFFSET] + (x)))
@ -886,12 +855,6 @@ sanitize_timings(pmac_ide_hwif_t *pmif)
pmif->timings[2] = pmif->timings[3] = value2;
}
unsigned long
pmac_ide_get_base(int index)
{
return pmac_ide[index].regbase;
}
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
@ -1108,6 +1071,15 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
return 0;
}
static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
{
int i;
for (i = 0; i < 8; ++i)
hw->io_ports[i] = base + i * 0x10;
hw->io_ports[8] = base + 0x160;
}
/*
* Attach to a macio probed interface
*/
@ -1181,7 +1153,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
dev_set_drvdata(&mdev->ofdev.dev, hwif);
memset(&hw, 0, sizeof(hw));
pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL);
pmac_ide_init_ports(&hw, pmif->regbase);
hw.irq = irq;
hw.dev = &mdev->ofdev.dev;
@ -1295,7 +1267,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, hwif);
memset(&hw, 0, sizeof(hw));
pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL);
pmac_ide_init_ports(&hw, pmif->regbase);
hw.irq = pdev->irq;
hw.dev = &pdev->dev;