ASoC: meson: add axg spdif input

Add support for the spdif input decoder of the axg SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Jerome Brunet 2018-12-11 14:47:12 +01:00 коммит произвёл Mark Brown
Родитель 18dc4665fb
Коммит 5ce5658375
Не найден ключ, соответствующий данной подписи
Идентификатор ключа GPG: 24D68B725D5487D0
3 изменённых файлов: 531 добавлений и 1 удалений

Просмотреть файл

@ -54,6 +54,7 @@ config SND_MESON_AXG_SOUND_CARD
imply SND_MESON_AXG_TDMIN
imply SND_MESON_AXG_TDMOUT
imply SND_MESON_AXG_SPDIFOUT
imply SND_MESON_AXG_SPDIFIN
imply SND_MESON_AXG_PDM
help
Select Y or M to add support for the AXG SoC sound card
@ -67,6 +68,13 @@ config SND_MESON_AXG_SPDIFOUT
Select Y or M to add support for SPDIF output serializer embedded
in the Amlogic AXG SoC family
config SND_MESON_AXG_SPDIFIN
tristate "Amlogic AXG SPDIF Input Support"
imply SND_SOC_SPDIF
help
Select Y or M to add support for SPDIF input embedded
in the Amlogic AXG SoC family
config SND_MESON_AXG_PDM
tristate "Amlogic AXG PDM Input Support"
imply SND_SOC_DMIC
@ -74,5 +82,4 @@ config SND_MESON_AXG_PDM
help
Select Y or M to add support for PDM input embedded
in the Amlogic AXG SoC family
endmenu

Просмотреть файл

@ -8,6 +8,7 @@ snd-soc-meson-axg-tdm-interface-objs := axg-tdm-interface.o
snd-soc-meson-axg-tdmin-objs := axg-tdmin.o
snd-soc-meson-axg-tdmout-objs := axg-tdmout.o
snd-soc-meson-axg-sound-card-objs := axg-card.o
snd-soc-meson-axg-spdifin-objs := axg-spdifin.o
snd-soc-meson-axg-spdifout-objs := axg-spdifout.o
snd-soc-meson-axg-pdm-objs := axg-pdm.o
@ -19,5 +20,6 @@ obj-$(CONFIG_SND_MESON_AXG_TDM_INTERFACE) += snd-soc-meson-axg-tdm-interface.o
obj-$(CONFIG_SND_MESON_AXG_TDMIN) += snd-soc-meson-axg-tdmin.o
obj-$(CONFIG_SND_MESON_AXG_TDMOUT) += snd-soc-meson-axg-tdmout.o
obj-$(CONFIG_SND_MESON_AXG_SOUND_CARD) += snd-soc-meson-axg-sound-card.o
obj-$(CONFIG_SND_MESON_AXG_SPDIFIN) += snd-soc-meson-axg-spdifin.o
obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o
obj-$(CONFIG_SND_MESON_AXG_PDM) += snd-soc-meson-axg-pdm.o

Просмотреть файл

@ -0,0 +1,521 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright (c) 2018 BayLibre, SAS.
// Author: Jerome Brunet <jbrunet@baylibre.com>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/regmap.h>
#include <sound/soc.h>
#include <sound/soc-dai.h>
#include <sound/pcm_params.h>
#define SPDIFIN_CTRL0 0x00
#define SPDIFIN_CTRL0_EN BIT(31)
#define SPDIFIN_CTRL0_RST_OUT BIT(29)
#define SPDIFIN_CTRL0_RST_IN BIT(28)
#define SPDIFIN_CTRL0_WIDTH_SEL BIT(24)
#define SPDIFIN_CTRL0_STATUS_CH_SHIFT 11
#define SPDIFIN_CTRL0_STATUS_SEL GENMASK(10, 8)
#define SPDIFIN_CTRL0_SRC_SEL GENMASK(5, 4)
#define SPDIFIN_CTRL0_CHK_VALID BIT(3)
#define SPDIFIN_CTRL1 0x04
#define SPDIFIN_CTRL1_BASE_TIMER GENMASK(19, 0)
#define SPDIFIN_CTRL1_IRQ_MASK GENMASK(27, 20)
#define SPDIFIN_CTRL2 0x08
#define SPDIFIN_THRES_PER_REG 3
#define SPDIFIN_THRES_WIDTH 10
#define SPDIFIN_CTRL3 0x0c
#define SPDIFIN_CTRL4 0x10
#define SPDIFIN_TIMER_PER_REG 4
#define SPDIFIN_TIMER_WIDTH 8
#define SPDIFIN_CTRL5 0x14
#define SPDIFIN_CTRL6 0x18
#define SPDIFIN_STAT0 0x1c
#define SPDIFIN_STAT0_MODE GENMASK(30, 28)
#define SPDIFIN_STAT0_MAXW GENMASK(17, 8)
#define SPDIFIN_STAT0_IRQ GENMASK(7, 0)
#define SPDIFIN_IRQ_MODE_CHANGED BIT(2)
#define SPDIFIN_STAT1 0x20
#define SPDIFIN_STAT2 0x24
#define SPDIFIN_MUTE_VAL 0x28
#define SPDIFIN_MODE_NUM 7
struct axg_spdifin_cfg {
const unsigned int *mode_rates;
unsigned int ref_rate;
};
struct axg_spdifin {
const struct axg_spdifin_cfg *conf;
struct regmap *map;
struct clk *refclk;
struct clk *pclk;
};
/*
* TODO:
* It would have been nice to check the actual rate against the sample rate
* requested in hw_params(). Unfortunately, I was not able to make the mode
* detection and IRQ work reliably:
*
* 1. IRQs are generated on mode change only, so there is no notification
* on transition between no signal and mode 0 (32kHz).
* 2. Mode detection very often has glitches, and may detects the
* lowest or the highest mode before zeroing in on the actual mode.
*
* This makes calling snd_pcm_stop() difficult to get right. Even notifying
* the kcontrol would be very unreliable at this point.
* Let's keep things simple until the magic spell that makes this work is
* found.
*/
static unsigned int axg_spdifin_get_rate(struct axg_spdifin *priv)
{
unsigned int stat, mode, rate = 0;
regmap_read(priv->map, SPDIFIN_STAT0, &stat);
mode = FIELD_GET(SPDIFIN_STAT0_MODE, stat);
/*
* If max width is zero, we are not capturing anything.
* Also Sometimes, when the capture is on but there is no data,
* mode is SPDIFIN_MODE_NUM, but not always ...
*/
if (FIELD_GET(SPDIFIN_STAT0_MAXW, stat) &&
mode < SPDIFIN_MODE_NUM)
rate = priv->conf->mode_rates[mode];
return rate;
}
static int axg_spdifin_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
/* Apply both reset */
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
SPDIFIN_CTRL0_RST_OUT |
SPDIFIN_CTRL0_RST_IN,
0);
/* Clear out reset before in reset */
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
SPDIFIN_CTRL0_RST_OUT, SPDIFIN_CTRL0_RST_OUT);
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
SPDIFIN_CTRL0_RST_IN, SPDIFIN_CTRL0_RST_IN);
return 0;
}
static int axg_spdifin_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
int ret;
ret = clk_prepare_enable(priv->refclk);
if (ret) {
dev_err(dai->dev,
"failed to enable spdifin reference clock\n");
return ret;
}
regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN,
SPDIFIN_CTRL0_EN);
return 0;
}
static void axg_spdifin_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0);
clk_disable_unprepare(priv->refclk);
}
static void axg_spdifin_write_mode_param(struct regmap *map, int mode,
unsigned int val,
unsigned int num_per_reg,
unsigned int base_reg,
unsigned int width)
{
unsigned int offset = mode, rem;
unsigned int reg, shift;
rem = do_div(offset, num_per_reg);
reg = offset * regmap_get_reg_stride(map) + base_reg;
shift = width * (num_per_reg - 1 - rem);
regmap_update_bits(map, reg, GENMASK(width - 1, 0) << shift,
val << shift);
}
static void axg_spdifin_write_timer(struct regmap *map, int mode,
unsigned int val)
{
axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_TIMER_PER_REG,
SPDIFIN_CTRL4, SPDIFIN_TIMER_WIDTH);
}
static void axg_spdifin_write_threshold(struct regmap *map, int mode,
unsigned int val)
{
axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_THRES_PER_REG,
SPDIFIN_CTRL2, SPDIFIN_THRES_WIDTH);
}
static unsigned int axg_spdifin_mode_timer(struct axg_spdifin *priv,
int mode,
unsigned int rate)
{
/*
* Number of period of the reference clock during a period of the
* input signal reference clock
*/
return rate / (128 * priv->conf->mode_rates[mode]);
}
static int axg_spdifin_sample_mode_config(struct snd_soc_dai *dai,
struct axg_spdifin *priv)
{
unsigned int rate, t_next;
int ret, i = SPDIFIN_MODE_NUM - 1;
/* Set spdif input reference clock */
ret = clk_set_rate(priv->refclk, priv->conf->ref_rate);
if (ret) {
dev_err(dai->dev, "reference clock rate set failed\n");
return ret;
}
/*
* The rate actually set might be slightly different, get
* the actual rate for the following mode calculation
*/
rate = clk_get_rate(priv->refclk);
/* HW will update mode every 1ms */
regmap_update_bits(priv->map, SPDIFIN_CTRL1,
SPDIFIN_CTRL1_BASE_TIMER,
FIELD_PREP(SPDIFIN_CTRL1_BASE_TIMER, rate / 1000));
/* Threshold based on the minimum width between two edges */
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
SPDIFIN_CTRL0_WIDTH_SEL, SPDIFIN_CTRL0_WIDTH_SEL);
/* Calculate the last timer which has no threshold */
t_next = axg_spdifin_mode_timer(priv, i, rate);
axg_spdifin_write_timer(priv->map, i, t_next);
do {
unsigned int t;
i -= 1;
/* Calculate the timer */
t = axg_spdifin_mode_timer(priv, i, rate);
/* Set the timer value */
axg_spdifin_write_timer(priv->map, i, t);
/* Set the threshold value */
axg_spdifin_write_threshold(priv->map, i, t + t_next);
/* Save the current timer for the next threshold calculation */
t_next = t;
} while (i > 0);
return 0;
}
static int axg_spdifin_dai_probe(struct snd_soc_dai *dai)
{
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
int ret;
ret = clk_prepare_enable(priv->pclk);
if (ret) {
dev_err(dai->dev, "failed to enable pclk\n");
return ret;
}
ret = axg_spdifin_sample_mode_config(dai, priv);
if (ret) {
dev_err(dai->dev, "mode configuration failed\n");
clk_disable_unprepare(priv->pclk);
return ret;
}
return 0;
}
static int axg_spdifin_dai_remove(struct snd_soc_dai *dai)
{
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
clk_disable_unprepare(priv->pclk);
return 0;
}
static const struct snd_soc_dai_ops axg_spdifin_ops = {
.prepare = axg_spdifin_prepare,
.startup = axg_spdifin_startup,
.shutdown = axg_spdifin_shutdown,
};
static int axg_spdifin_iec958_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
static int axg_spdifin_get_status_mask(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int i;
for (i = 0; i < 24; i++)
ucontrol->value.iec958.status[i] = 0xff;
return 0;
}
static int axg_spdifin_get_status(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *c = snd_kcontrol_chip(kcontrol);
struct axg_spdifin *priv = snd_soc_component_get_drvdata(c);
int i, j;
for (i = 0; i < 6; i++) {
unsigned int val;
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
SPDIFIN_CTRL0_STATUS_SEL,
FIELD_PREP(SPDIFIN_CTRL0_STATUS_SEL, i));
regmap_read(priv->map, SPDIFIN_STAT1, &val);
for (j = 0; j < 4; j++) {
unsigned int offset = i * 4 + j;
ucontrol->value.iec958.status[offset] =
(val >> (j * 8)) & 0xff;
}
}
return 0;
}
#define AXG_SPDIFIN_IEC958_MASK \
{ \
.access = SNDRV_CTL_ELEM_ACCESS_READ, \
.iface = SNDRV_CTL_ELEM_IFACE_PCM, \
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, MASK), \
.info = axg_spdifin_iec958_info, \
.get = axg_spdifin_get_status_mask, \
}
#define AXG_SPDIFIN_IEC958_STATUS \
{ \
.access = (SNDRV_CTL_ELEM_ACCESS_READ | \
SNDRV_CTL_ELEM_ACCESS_VOLATILE), \
.iface = SNDRV_CTL_ELEM_IFACE_PCM, \
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE), \
.info = axg_spdifin_iec958_info, \
.get = axg_spdifin_get_status, \
}
static const char * const spdifin_chsts_src_texts[] = {
"A", "B",
};
static SOC_ENUM_SINGLE_DECL(axg_spdifin_chsts_src_enum, SPDIFIN_CTRL0,
SPDIFIN_CTRL0_STATUS_CH_SHIFT,
spdifin_chsts_src_texts);
static int axg_spdifin_rate_lock_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 192000;
return 0;
}
static int axg_spdifin_rate_lock_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *c = snd_kcontrol_chip(kcontrol);
struct axg_spdifin *priv = snd_soc_component_get_drvdata(c);
ucontrol->value.integer.value[0] = axg_spdifin_get_rate(priv);
return 0;
}
#define AXG_SPDIFIN_LOCK_RATE(xname) \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_PCM, \
.access = (SNDRV_CTL_ELEM_ACCESS_READ | \
SNDRV_CTL_ELEM_ACCESS_VOLATILE), \
.get = axg_spdifin_rate_lock_get, \
.info = axg_spdifin_rate_lock_info, \
.name = xname, \
}
static const struct snd_kcontrol_new axg_spdifin_controls[] = {
AXG_SPDIFIN_LOCK_RATE("Capture Rate Lock"),
SOC_DOUBLE("Capture Switch", SPDIFIN_CTRL0, 7, 6, 1, 1),
SOC_ENUM(SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) "Src",
axg_spdifin_chsts_src_enum),
AXG_SPDIFIN_IEC958_MASK,
AXG_SPDIFIN_IEC958_STATUS,
};
static const struct snd_soc_component_driver axg_spdifin_component_drv = {
.controls = axg_spdifin_controls,
.num_controls = ARRAY_SIZE(axg_spdifin_controls),
};
static const struct regmap_config axg_spdifin_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = SPDIFIN_MUTE_VAL,
};
static const unsigned int axg_spdifin_mode_rates[SPDIFIN_MODE_NUM] = {
32000, 44100, 48000, 88200, 96000, 176400, 192000,
};
static const struct axg_spdifin_cfg axg_cfg = {
.mode_rates = axg_spdifin_mode_rates,
.ref_rate = 333333333,
};
static const struct of_device_id axg_spdifin_of_match[] = {
{
.compatible = "amlogic,axg-spdifin",
.data = &axg_cfg,
}, {}
};
MODULE_DEVICE_TABLE(of, axg_spdifin_of_match);
static struct snd_soc_dai_driver *
axg_spdifin_get_dai_drv(struct device *dev, struct axg_spdifin *priv)
{
struct snd_soc_dai_driver *drv;
int i;
drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
if (!drv)
return ERR_PTR(-ENOMEM);
drv->name = "SPDIF Input";
drv->ops = &axg_spdifin_ops;
drv->probe = axg_spdifin_dai_probe;
drv->remove = axg_spdifin_dai_remove;
drv->capture.stream_name = "Capture";
drv->capture.channels_min = 1;
drv->capture.channels_max = 2;
drv->capture.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE;
for (i = 0; i < SPDIFIN_MODE_NUM; i++) {
unsigned int rb =
snd_pcm_rate_to_rate_bit(priv->conf->mode_rates[i]);
if (rb == SNDRV_PCM_RATE_KNOT)
return ERR_PTR(-EINVAL);
drv->capture.rates |= rb;
}
return drv;
}
static int axg_spdifin_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct axg_spdifin *priv;
struct snd_soc_dai_driver *dai_drv;
struct resource *res;
void __iomem *regs;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform_set_drvdata(pdev, priv);
priv->conf = of_device_get_match_data(dev);
if (!priv->conf) {
dev_err(dev, "failed to match device\n");
return -ENODEV;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(dev, res);
if (IS_ERR(regs))
return PTR_ERR(regs);
priv->map = devm_regmap_init_mmio(dev, regs, &axg_spdifin_regmap_cfg);
if (IS_ERR(priv->map)) {
dev_err(dev, "failed to init regmap: %ld\n",
PTR_ERR(priv->map));
return PTR_ERR(priv->map);
}
priv->pclk = devm_clk_get(dev, "pclk");
if (IS_ERR(priv->pclk)) {
ret = PTR_ERR(priv->pclk);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get pclk: %d\n", ret);
return ret;
}
priv->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(priv->refclk)) {
ret = PTR_ERR(priv->refclk);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get mclk: %d\n", ret);
return ret;
}
dai_drv = axg_spdifin_get_dai_drv(dev, priv);
if (IS_ERR(dai_drv)) {
dev_err(dev, "failed to get dai driver: %ld\n",
PTR_ERR(dai_drv));
return PTR_ERR(dai_drv);
}
return devm_snd_soc_register_component(dev, &axg_spdifin_component_drv,
dai_drv, 1);
}
static struct platform_driver axg_spdifin_pdrv = {
.probe = axg_spdifin_probe,
.driver = {
.name = "axg-spdifin",
.of_match_table = axg_spdifin_of_match,
},
};
module_platform_driver(axg_spdifin_pdrv);
MODULE_DESCRIPTION("Amlogic AXG SPDIF Input driver");
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_LICENSE("GPL v2");