From 4187377b2411d43ea4470b35162917a5093857bf Mon Sep 17 00:00:00 2001 From: Eric Dujardin Date: Sat, 23 Feb 2008 22:51:28 -0700 Subject: [PATCH 01/24] [POWERPC] Add export for mpc52xx_set_psc_clkdiv mpc52xx_set_psc_clkdiv is needed by PSC device drivers. Signed-off-by: Eric Dujardin Signed-off-by: Grant Likely --- arch/powerpc/platforms/52xx/mpc52xx_common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 9aa4425d80b2..4d5fd1dbd400 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -199,6 +199,7 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv) return 0; } +EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv); /** * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer From d58831375d68a3bd39d5ebab9eca711fbb4ee108 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 26 Feb 2008 13:31:42 +1100 Subject: [PATCH 02/24] [POWERPC] spufs: fix context destruction during psmap fault We have a small window where a spu context may be destroyed while we're servicing a page fault (from another thread) to the context's problem state mapping. After we up_read() the mmap_sem, it's possible that the context is destroyed by its owning thread, and so the later references to ctx are invalid. This can maifest as a deadlock on the (now free()-ed) context state mutex. This change adds a reference to the context before we release the mmap_sem, so that the context cannot be destroyed. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/file.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c66c3756970d..f7a7e8635fb6 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -366,6 +366,13 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (offset >= ps_size) return NOPFN_SIGBUS; + /* + * Because we release the mmap_sem, the context may be destroyed while + * we're in spu_wait. Grab an extra reference so it isn't destroyed + * in the meantime. + */ + get_spu_context(ctx); + /* * We have to wait for context to be loaded before we have * pages to hand out to the user, but we don't want to wait @@ -375,7 +382,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, * hanged. */ if (spu_acquire(ctx)) - return NOPFN_REFAULT; + goto refault; if (ctx->state == SPU_STATE_SAVED) { up_read(¤t->mm->mmap_sem); @@ -391,6 +398,9 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (!ret) spu_release(ctx); + +refault: + put_spu_context(ctx); return NOPFN_REFAULT; } From e33eb074cb95783b4497327098e4128e9f8c15b9 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 20 Feb 2008 21:45:58 +1100 Subject: [PATCH 03/24] [POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as "405exr" compatible. This patch changes it to "405ex". The 405EX and 405EXr are identical exept that the 2nd PCIe and the 2nd EMAC interfaces are missing. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/haleakala.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 5dd3d15f0feb..ae68fefc01b6 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -235,7 +235,7 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex"; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; port = <0>; /* port number */ reg = Date: Fri, 22 Feb 2008 02:21:37 +1100 Subject: [PATCH 04/24] [POWERPC] 4xx: Fix L1 cache size in katmai DTS This patch changes the katmai (440SPe) L1 cache size to 32k. Some whitespace issues are cleaned up too. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/katmai.dts | 58 ++++++++++++++++---------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index bc32ac7250ec..fc86e5a3afc4 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -38,8 +38,8 @@ timebase-frequency = <0>; /* Filled in by zImage */ i-cache-line-size = <20>; d-cache-line-size = <20>; - i-cache-size = <20000>; - d-cache-size = <20000>; + i-cache-size = <8000>; + d-cache-size = <8000>; dcr-controller; dcr-access-method = "native"; }; @@ -136,11 +136,11 @@ }; POB0: opb { - compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; - clock-frequency = <0>; /* Filled in by zImage */ + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; @@ -153,38 +153,38 @@ }; UART0: serial@10000200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000200 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; virtual-reg = ; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; - interrupt-parent = <&UIC0>; - interrupts = <0 4>; - }; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; UART1: serial@10000300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000300 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; virtual-reg = ; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <1 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; UART2: serial@10000600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000600 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; virtual-reg = ; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC1>; - interrupts = <5 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; IIC0: i2c@10000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; From c91f91e5fb04fc8fd8fa4b5e9d949031e631c107 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Wed, 27 Feb 2008 01:58:53 +1100 Subject: [PATCH 05/24] [POWERPC] 44x: add missing define TARGET_4xx and TARGET_440GX to cuboot-taishan In order to get the proper boad info (bd_info) structure defined in ppcboot.h both TARGET_4xx and TARGET_44x should be defined for all PowerPC 440 boards. The 440GX boards also need TARGET_440GX defined since they have 4 EMACs and there are 4 MAC addesses in bd_info passed by u-boot. Signed-off-by: Valentine Barshak Signed-off-by: Josh Boyer --- arch/powerpc/boot/cuboot-taishan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c index f66455a45ab1..b55b80467eed 100644 --- a/arch/powerpc/boot/cuboot-taishan.c +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -21,7 +21,9 @@ #include "dcr.h" #include "4xx.h" +#define TARGET_4xx #define TARGET_44x +#define TARGET_440GX #include "ppcboot.h" static bd_t bd; From 0111a701867a796a7ca6ecbc385e4befc9f35066 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Wed, 27 Feb 2008 19:08:13 +1100 Subject: [PATCH 06/24] [POWERPC] spufs: fix invalid scheduling of forgotten contexts At present, we have a situation where a context with no owner is re-scheduled by spu_forget: Thread 1: reading regs file Thread 2: context owner spu_forget() - ctx->owner = NULL - set SPU_SCHED_WAS_ACTIVE spu_acquire_saved() - context is in saved state spu_release_saved() - SPU_SCHED_WAS_ACTIVE is set, so spu_activate() the context, which now has no owner In spu_forget(), we shouldn't be requesting a re-schedule by setting SPU_SCHED_WAS_ACTIVE. This change removes the set_bit in spu_forget(), so that spu_release_saved() doesn't reinsert this destroyed context on to the run queue. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/context.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 133995ed5cc7..cf6c2c89211d 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -109,13 +109,12 @@ void spu_forget(struct spu_context *ctx) /* * This is basically an open-coded spu_acquire_saved, except that - * we don't acquire the state mutex interruptible. + * we don't acquire the state mutex interruptible, and we don't + * want this context to be rescheduled on release. */ mutex_lock(&ctx->state_mutex); - if (ctx->state != SPU_STATE_SAVED) { - set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); - } mm = ctx->owner; ctx->owner = NULL; From fe57e8be9e858b6d7af4e088cbbe718f51241eee Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Thu, 28 Feb 2008 08:16:27 -0600 Subject: [PATCH 07/24] [POWERPC] 4xx: Use correct board info structure in cuboot wrappers Correct the remaining 44x cuboot wrappers to define TARGET_4xx as well. This creates the correct structure to use, including things like the second MAC address. Signed-off-by: Josh Boyer --- arch/powerpc/boot/cuboot-bamboo.c | 1 + arch/powerpc/boot/cuboot-ebony.c | 1 + arch/powerpc/boot/cuboot-katmai.c | 1 + arch/powerpc/boot/cuboot-warp.c | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c index 900c7ff2b7e9..b5c30f766c40 100644 --- a/arch/powerpc/boot/cuboot-bamboo.c +++ b/arch/powerpc/boot/cuboot-bamboo.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c index c5f37ce172ea..56564ba37f62 100644 --- a/arch/powerpc/boot/cuboot-ebony.c +++ b/arch/powerpc/boot/cuboot-ebony.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c index c021167f9381..5434d70b5660 100644 --- a/arch/powerpc/boot/cuboot-katmai.c +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -22,6 +22,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index bdedebe1bc14..3db93e85e9ea 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -11,6 +11,7 @@ #include "4xx.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" From f62f2fdd9c33160584b800da8c4a25ff1679225a Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Mon, 25 Feb 2008 10:34:47 +1100 Subject: [PATCH 08/24] [POWERPC] Xilinx: hwicap cleanup This fixes various items pointed out during a review of the hwicap driver. Primarily, reversed memcpy calls, re-entrancy issues, and mutex conversion have been addressed. There are also fixes to comments to use the kerneldoc format, as well as some sparse annotations. Signed-off-by: Stephen Neuendorffer Acked-by: Grant Likely Signed-off-by: Josh Boyer --- drivers/char/xilinx_hwicap/buffer_icap.c | 80 ++++++------ drivers/char/xilinx_hwicap/fifo_icap.c | 60 ++++----- drivers/char/xilinx_hwicap/xilinx_hwicap.c | 138 +++++++++------------ drivers/char/xilinx_hwicap/xilinx_hwicap.h | 24 ++-- 4 files changed, 144 insertions(+), 158 deletions(-) diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index dfea2bde162b..f577daedb630 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -73,8 +73,8 @@ #define XHI_BUFFER_START 0 /** - * buffer_icap_get_status: Get the contents of the status register. - * @parameter base_address: is the base address of the device + * buffer_icap_get_status - Get the contents of the status register. + * @base_address: is the base address of the device * * The status register contains the ICAP status and the done bit. * @@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address) } /** - * buffer_icap_get_bram: Reads data from the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset from which the data should be read. + * buffer_icap_get_bram - Reads data from the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset from which the data should be read. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address, } /** - * buffer_icap_busy: Return true if the icap device is busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address) } /** - * buffer_icap_busy: Return true if the icap device is not busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is not busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address) } /** - * buffer_icap_set_size: Set the size register. - * @parameter base_address: is the base address of the device - * @parameter data: The size in bytes. + * buffer_icap_set_size - Set the size register. + * @base_address: is the base address of the device + * @data: The size in bytes. * * The size register holds the number of 8 bit bytes to transfer between * bram and the icap (or icap to bram). @@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address, } /** - * buffer_icap_mSetoffsetReg: Set the bram offset register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_offset - Set the bram offset register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The bram offset register holds the starting bram address to transfer * data from during configuration or write data to during readback. @@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address, } /** - * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The RNC register determines the direction of the data transfer. It * controls whether a configuration or readback take place. Writing to @@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address, } /** - * buffer_icap_set_bram: Write data to the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset at which the data should be written. - * @parameter data: The value to be written to the bram offset. + * buffer_icap_set_bram - Write data to the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset at which the data should be written. + * @data: The value to be written to the bram offset. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address, } /** - * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, @@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, @@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_reset: Reset the logic of the icap device. - * @parameter drvdata: a pointer to the drvdata. + * buffer_icap_reset - Reset the logic of the icap device. + * @drvdata: a pointer to the drvdata. * * Writing to the status register resets the ICAP logic in an internal * version of the core. For the version of the core published in EDK, @@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata) } /** - * buffer_icap_set_configuration: Load a partial bitstream from system memory. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Kernel address of the partial bitstream. - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_set_configuration - Load a partial bitstream from system memory. + * @drvdata: a pointer to the drvdata. + * @data: Kernel address of the partial bitstream. + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) @@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, }; /** - * buffer_icap_get_configuration: Read configuration data from the device. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Address of the data representing the partial bitstream - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_get_configuration - Read configuration data from the device. + * @drvdata: a pointer to the drvdata. + * @data: Address of the data representing the partial bitstream + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 0988314694a6..6f45dbd47125 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -94,9 +94,9 @@ /** - * fifo_icap_fifo_write: Write data to the write FIFO. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: the 32-bit value to be written to the FIFO. + * fifo_icap_fifo_write - Write data to the write FIFO. + * @drvdata: a pointer to the drvdata. + * @data: the 32-bit value to be written to the FIFO. * * This function will silently fail if the fifo is full. **/ @@ -108,8 +108,8 @@ static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_fifo_read: Read data from the Read FIFO. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_fifo_read - Read data from the Read FIFO. + * @drvdata: a pointer to the drvdata. * * This function will silently fail if the fifo is empty. **/ @@ -121,9 +121,9 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_set_read_size: Set the the size register. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: the size of the following read transaction, in words. + * fifo_icap_set_read_size - Set the the size register. + * @drvdata: a pointer to the drvdata. + * @data: the size of the following read transaction, in words. **/ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata, u32 data) @@ -132,8 +132,8 @@ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_start_config: Initiate a configuration (write) to the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_start_config - Initiate a configuration (write) to the device. + * @drvdata: a pointer to the drvdata. **/ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata) { @@ -142,8 +142,8 @@ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_start_readback: Initiate a readback from the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_start_readback - Initiate a readback from the device. + * @drvdata: a pointer to the drvdata. **/ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata) { @@ -152,8 +152,8 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_busy: Return true if the ICAP is still processing a transaction. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_busy - Return true if the ICAP is still processing a transaction. + * @drvdata: a pointer to the drvdata. **/ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata) { @@ -163,8 +163,8 @@ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_write_fifo_vacancy: Query the write fifo available space. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_write_fifo_vacancy - Query the write fifo available space. + * @drvdata: a pointer to the drvdata. * * Return the number of words that can be safely pushed into the write fifo. **/ @@ -175,8 +175,8 @@ static inline u32 fifo_icap_write_fifo_vacancy( } /** - * fifo_icap_read_fifo_occupancy: Query the read fifo available data. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_read_fifo_occupancy - Query the read fifo available data. + * @drvdata: a pointer to the drvdata. * * Return the number of words that can be safely read from the read fifo. **/ @@ -187,11 +187,11 @@ static inline u32 fifo_icap_read_fifo_occupancy( } /** - * fifo_icap_set_configuration: Send configuration data to the ICAP. - * @parameter drvdata: a pointer to the drvdata. - * @parameter frame_buffer: a pointer to the data to be written to the + * fifo_icap_set_configuration - Send configuration data to the ICAP. + * @drvdata: a pointer to the drvdata. + * @frame_buffer: a pointer to the data to be written to the * ICAP device. - * @parameter num_words: the number of words (32 bit) to write to the ICAP + * @num_words: the number of words (32 bit) to write to the ICAP * device. * This function writes the given user data to the Write FIFO in @@ -266,10 +266,10 @@ int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_get_configuration: Read configuration data from the device. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Address of the data representing the partial bitstream - * @parameter size: the size of the partial bitstream in 32 bit words. + * fifo_icap_get_configuration - Read configuration data from the device. + * @drvdata: a pointer to the drvdata. + * @data: Address of the data representing the partial bitstream + * @size: the size of the partial bitstream in 32 bit words. * * This function reads the specified number of words from the ICAP device in * the polled mode. @@ -335,8 +335,8 @@ int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata, } /** - * buffer_icap_reset: Reset the logic of the icap device. - * @parameter drvdata: a pointer to the drvdata. + * buffer_icap_reset - Reset the logic of the icap device. + * @drvdata: a pointer to the drvdata. * * This function forces the software reset of the complete HWICAP device. * All the registers will return to the default value and the FIFO is also @@ -360,8 +360,8 @@ void fifo_icap_reset(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_flush_fifo: This function flushes the FIFOs in the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_flush_fifo - This function flushes the FIFOs in the device. + * @drvdata: a pointer to the drvdata. */ void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata) { diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index 24f6aef0fd3c..2284fa2a5a57 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -84,7 +84,7 @@ #include #include #include -#include +#include #include #include #include @@ -119,6 +119,7 @@ module_param(xhwicap_minor, int, S_IRUGO); /* An array, which is set to true when the device is registered. */ static bool probed_devices[HWICAP_DEVICES]; +static struct mutex icap_sem; static struct class *icap_class; @@ -199,14 +200,14 @@ static const struct config_registers v5_config_registers = { }; /** - * hwicap_command_desync: Send a DESYNC command to the ICAP port. - * @parameter drvdata: a pointer to the drvdata. + * hwicap_command_desync - Send a DESYNC command to the ICAP port. + * @drvdata: a pointer to the drvdata. * * This command desynchronizes the ICAP After this command, a * bitstream containing a NULL packet, followed by a SYNCH packet is * required before the ICAP will recognize commands. */ -int hwicap_command_desync(struct hwicap_drvdata *drvdata) +static int hwicap_command_desync(struct hwicap_drvdata *drvdata) { u32 buffer[4]; u32 index = 0; @@ -228,51 +229,18 @@ int hwicap_command_desync(struct hwicap_drvdata *drvdata) } /** - * hwicap_command_capture: Send a CAPTURE command to the ICAP port. - * @parameter drvdata: a pointer to the drvdata. - * - * This command captures all of the flip flop states so they will be - * available during readback. One can use this command instead of - * enabling the CAPTURE block in the design. - */ -int hwicap_command_capture(struct hwicap_drvdata *drvdata) -{ - u32 buffer[7]; - u32 index = 0; - - /* - * Create the data to be written to the ICAP. - */ - buffer[index++] = XHI_DUMMY_PACKET; - buffer[index++] = XHI_SYNC_PACKET; - buffer[index++] = XHI_NOOP_PACKET; - buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1; - buffer[index++] = XHI_CMD_GCAPTURE; - buffer[index++] = XHI_DUMMY_PACKET; - buffer[index++] = XHI_DUMMY_PACKET; - - /* - * Write the data to the FIFO and intiate the transfer of data - * present in the FIFO to the ICAP device. - */ - return drvdata->config->set_configuration(drvdata, - &buffer[0], index); - -} - -/** - * hwicap_get_configuration_register: Query a configuration register. - * @parameter drvdata: a pointer to the drvdata. - * @parameter reg: a constant which represents the configuration + * hwicap_get_configuration_register - Query a configuration register. + * @drvdata: a pointer to the drvdata. + * @reg: a constant which represents the configuration * register value to be returned. * Examples: XHI_IDCODE, XHI_FLR. - * @parameter RegData: returns the value of the register. + * @reg_data: returns the value of the register. * * Sends a query packet to the ICAP and then receives the response. * The icap is left in Synched state. */ -int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, - u32 reg, u32 *RegData) +static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, + u32 reg, u32 *reg_data) { int status; u32 buffer[6]; @@ -300,14 +268,14 @@ int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, /* * Read the configuration register */ - status = drvdata->config->get_configuration(drvdata, RegData, 1); + status = drvdata->config->get_configuration(drvdata, reg_data, 1); if (status) return status; return 0; } -int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) +static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) { int status; u32 idcode; @@ -344,7 +312,7 @@ int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) } static ssize_t -hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) +hwicap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct hwicap_drvdata *drvdata = file->private_data; ssize_t bytes_to_read = 0; @@ -353,8 +321,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) u32 bytes_remaining; int status; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; if (drvdata->read_buffer_in_use) { /* If there are leftover bytes in the buffer, just */ @@ -370,8 +339,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) goto error; } drvdata->read_buffer_in_use -= bytes_to_read; - memcpy(drvdata->read_buffer + bytes_to_read, - drvdata->read_buffer, 4 - bytes_to_read); + memmove(drvdata->read_buffer, + drvdata->read_buffer + bytes_to_read, + 4 - bytes_to_read); } else { /* Get new data from the ICAP, and return was was requested. */ kbuf = (u32 *) get_zeroed_page(GFP_KERNEL); @@ -414,18 +384,20 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) status = -EFAULT; goto error; } - memcpy(kbuf, drvdata->read_buffer, bytes_remaining); + memcpy(drvdata->read_buffer, + kbuf, + bytes_remaining); drvdata->read_buffer_in_use = bytes_remaining; free_page((unsigned long)kbuf); } status = bytes_to_read; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } static ssize_t -hwicap_write(struct file *file, const char *buf, +hwicap_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { struct hwicap_drvdata *drvdata = file->private_data; @@ -435,8 +407,9 @@ hwicap_write(struct file *file, const char *buf, ssize_t len; ssize_t status; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; left += drvdata->write_buffer_in_use; @@ -465,7 +438,7 @@ hwicap_write(struct file *file, const char *buf, memcpy(kbuf, drvdata->write_buffer, drvdata->write_buffer_in_use); if (copy_from_user( - (((char *)kbuf) + (drvdata->write_buffer_in_use)), + (((char *)kbuf) + drvdata->write_buffer_in_use), buf + written, len - (drvdata->write_buffer_in_use))) { free_page((unsigned long)kbuf); @@ -508,7 +481,7 @@ hwicap_write(struct file *file, const char *buf, free_page((unsigned long)kbuf); status = written; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -519,8 +492,9 @@ static int hwicap_open(struct inode *inode, struct file *file) drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev); - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; if (drvdata->is_open) { status = -EBUSY; @@ -539,7 +513,7 @@ static int hwicap_open(struct inode *inode, struct file *file) drvdata->is_open = 1; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -549,8 +523,7 @@ static int hwicap_release(struct inode *inode, struct file *file) int i; int status = 0; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + mutex_lock(&drvdata->sem); if (drvdata->write_buffer_in_use) { /* Flush write buffer. */ @@ -569,7 +542,7 @@ static int hwicap_release(struct inode *inode, struct file *file) error: drvdata->is_open = 0; - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -592,31 +565,36 @@ static int __devinit hwicap_setup(struct device *dev, int id, dev_info(dev, "Xilinx icap port driver\n"); + mutex_lock(&icap_sem); + if (id < 0) { for (id = 0; id < HWICAP_DEVICES; id++) if (!probed_devices[id]) break; } if (id < 0 || id >= HWICAP_DEVICES) { + mutex_unlock(&icap_sem); dev_err(dev, "%s%i too large\n", DRIVER_NAME, id); return -EINVAL; } if (probed_devices[id]) { + mutex_unlock(&icap_sem); dev_err(dev, "cannot assign to %s%i; it is already in use\n", DRIVER_NAME, id); return -EBUSY; } probed_devices[id] = 1; + mutex_unlock(&icap_sem); devt = MKDEV(xhwicap_major, xhwicap_minor + id); - drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); + drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); if (!drvdata) { dev_err(dev, "Couldn't allocate device private record\n"); - return -ENOMEM; + retval = -ENOMEM; + goto failed0; } - memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata)); dev_set_drvdata(dev, (void *)drvdata); if (!regs_res) { @@ -648,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, drvdata->config = config; drvdata->config_regs = config_regs; - init_MUTEX(&drvdata->sem); + mutex_init(&drvdata->sem); drvdata->is_open = 0; dev_info(dev, "ioremap %lx to %p with size %x\n", @@ -663,7 +641,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, goto failed3; } /* devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */ - class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME); + device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id); return 0; /* success */ failed3: @@ -675,6 +653,11 @@ static int __devinit hwicap_setup(struct device *dev, int id, failed1: kfree(drvdata); + failed0: + mutex_lock(&icap_sem); + probed_devices[id] = 0; + mutex_unlock(&icap_sem); + return retval; } @@ -699,14 +682,16 @@ static int __devexit hwicap_remove(struct device *dev) if (!drvdata) return 0; - class_device_destroy(icap_class, drvdata->devt); + device_destroy(icap_class, drvdata->devt); cdev_del(&drvdata->cdev); iounmap(drvdata->base_address); release_mem_region(drvdata->mem_start, drvdata->mem_size); kfree(drvdata); dev_set_drvdata(dev, NULL); - probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0; + mutex_lock(&icap_sem); + probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0; + mutex_unlock(&icap_sem); return 0; /* success */ } @@ -821,28 +806,29 @@ static struct of_platform_driver hwicap_of_driver = { }; /* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __devinit hwicap_of_register(void) +static inline int __init hwicap_of_register(void) { pr_debug("hwicap: calling of_register_platform_driver()\n"); return of_register_platform_driver(&hwicap_of_driver); } -static inline void __devexit hwicap_of_unregister(void) +static inline void __exit hwicap_of_unregister(void) { of_unregister_platform_driver(&hwicap_of_driver); } #else /* CONFIG_OF */ /* CONFIG_OF not enabled; do nothing helpers */ -static inline int __devinit hwicap_of_register(void) { return 0; } -static inline void __devexit hwicap_of_unregister(void) { } +static inline int __init hwicap_of_register(void) { return 0; } +static inline void __exit hwicap_of_unregister(void) { } #endif /* CONFIG_OF */ -static int __devinit hwicap_module_init(void) +static int __init hwicap_module_init(void) { dev_t devt; int retval; icap_class = class_create(THIS_MODULE, "xilinx_config"); + mutex_init(&icap_sem); if (xhwicap_major) { devt = MKDEV(xhwicap_major, xhwicap_minor); @@ -883,7 +869,7 @@ static int __devinit hwicap_module_init(void) return retval; } -static void __devexit hwicap_module_cleanup(void) +static void __exit hwicap_module_cleanup(void) { dev_t devt = MKDEV(xhwicap_major, xhwicap_minor); diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index ae771cac1629..405fee7e189b 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -48,9 +48,9 @@ struct hwicap_drvdata { u8 write_buffer[4]; u32 read_buffer_in_use; /* Always in [0,3] */ u8 read_buffer[4]; - u32 mem_start; /* phys. address of the control registers */ - u32 mem_end; /* phys. address of the control registers */ - u32 mem_size; + resource_size_t mem_start;/* phys. address of the control registers */ + resource_size_t mem_end; /* phys. address of the control registers */ + resource_size_t mem_size; void __iomem *base_address;/* virt. address of the control registers */ struct device *dev; @@ -61,7 +61,7 @@ struct hwicap_drvdata { const struct config_registers *config_regs; void *private_data; bool is_open; - struct semaphore sem; + struct mutex sem; }; struct hwicap_driver_config { @@ -164,29 +164,29 @@ struct config_registers { #define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL /** - * hwicap_type_1_read: Generates a Type 1 read packet header. - * @parameter: Register is the address of the register to be read back. + * hwicap_type_1_read - Generates a Type 1 read packet header. + * @reg: is the address of the register to be read back. * * Generates a Type 1 read packet header, which is used to indirectly * read registers in the configuration logic. This packet must then * be sent through the icap device, and a return packet received with * the information. **/ -static inline u32 hwicap_type_1_read(u32 Register) +static inline u32 hwicap_type_1_read(u32 reg) { return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | - (Register << XHI_REGISTER_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | (XHI_OP_READ << XHI_OP_SHIFT); } /** - * hwicap_type_1_write: Generates a Type 1 write packet header - * @parameter: Register is the address of the register to be read back. + * hwicap_type_1_write - Generates a Type 1 write packet header + * @reg: is the address of the register to be read back. **/ -static inline u32 hwicap_type_1_write(u32 Register) +static inline u32 hwicap_type_1_write(u32 reg) { return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | - (Register << XHI_REGISTER_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | (XHI_OP_WRITE << XHI_OP_SHIFT); } From 71791bee90dd29b292c7e55c1c00857578c912bd Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 25 Feb 2008 14:58:37 +1100 Subject: [PATCH 09/24] [POWERPC] spufs: fix order of sputrace thread IDs Currently, we get the following output from sputrace: [5.097935954] 1606: spufs_ps_nopfn__enter (thread = 1605, spu = -1) [5.097958164] 1606: spufs_ps_nopfn__insert (thread = 1605, spu = 15) [5.097973529] 1607: spufs_ps_nopfn__enter (thread = 1605, spu = -1) [5.097989174] 1607: spufs_ps_nopfn__insert (thread = 1605, spu = 14) Which leads me to believe that 160[67] is the current thread ID, and 1605 is the context backing the psmap. However, the 'current' and 'owner' tids are reversed - the 'current' tid is on the right. This change puts the current thread ID in the left-hand column instead, and renames the right to 'ctxthread'. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sputrace.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 01974f7776e1..79aa773f3c99 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -58,12 +58,12 @@ static int sputrace_sprint(char *tbuf, int n) ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start)); return snprintf(tbuf, n, - "[%lu.%09lu] %d: %s (thread = %d, spu = %d)\n", + "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n", (unsigned long) tv.tv_sec, (unsigned long) tv.tv_nsec, - t->owner_tid, - t->name, t->curr_tid, + t->name, + t->owner_tid, t->number); } @@ -188,6 +188,7 @@ struct spu_probe spu_probes[] = { { "spufs_ps_nopfn__insert", "%p %p", spu_context_event }, { "spu_acquire_saved__enter", "%p", spu_context_nospu_event }, { "destroy_spu_context__enter", "%p", spu_context_nospu_event }, + { "spufs_stop_callback__enter", "%p %p", spu_context_event }, }; static int __init sputrace_init(void) From fae9ca791507876c3ccaa8ab686b2ce42dc7a560 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Feb 2008 15:16:48 +1100 Subject: [PATCH 10/24] [POWERPC] spufs: synchronize IRQ when disabling There is a small race between the context save procedure and the SPU interrupt handling, where we expect all interrupt processing to have finished after disabling them, while an interrupt is still being processed on another CPU. The obvious fix is to call synchronize_irq() after disabling the interrupts at the start of the context save procedure to make sure we never access the SPU any more during an ongoing save or even after that. Thanks to Benjamin Herrenschmidt for pointing this out. Acked-by: Benjamin Herrenschmidt Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/switch.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 6f5886c7b1f9..e9dc7a55d1b9 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -34,6 +34,7 @@ #include #include +#include #include #include #include @@ -117,6 +118,8 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) * Write INT_MASK_class1 with value of 0. * Save INT_Mask_class2 in CSA. * Write INT_MASK_class2 with value of 0. + * Synchronize all three interrupts to be sure + * we no longer execute a handler on another CPU. */ spin_lock_irq(&spu->register_lock); if (csa) { @@ -129,6 +132,9 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) spu_int_mask_set(spu, 2, 0ul); eieio(); spin_unlock_irq(&spu->register_lock); + synchronize_irq(spu->irqs[0]); + synchronize_irq(spu->irqs[1]); + synchronize_irq(spu->irqs[2]); } static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu) From cc4b7c1814c9ad375e8167ea4a9ec4a0ec1ada04 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 26 Feb 2008 07:01:56 +0100 Subject: [PATCH 11/24] [POWERPC] spufs: invalidate SLB translation before adding a new entry When we replace an SLB entry in the MFC after using up all the available entries, there is a short window in which an incorrect entry is marked as valid. The problem is that the 'valid' bit is stored in the ESID, which is always written after the VSID. Overwriting the VSID first will make the original ESID entry point to the new VSID, which means that any concurrent DMA accessing the old ESID ends up being redirected to the new virtual address. A few cycles later, we write the new ESID and everything is fine again. That race can be closed by writing a zero entry to the ESID first, which makes sure that the VSID is not accessed until we write the new ESID. Note that we don't actually need to invalidate the SLB entry using the invalidation register, which would also flush any ERAT entries for that segment, because the segment translation does not become invalid but is only removed from the SLB cache. Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 87eb07f94c5f..cfc28e93c825 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -148,7 +148,11 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb) __func__, slbe, slb->vsid, slb->esid); out_be64(&priv2->slb_index_W, slbe); + /* set invalid before writing vsid */ + out_be64(&priv2->slb_esid_RW, 0); + /* now it's safe to write the vsid */ out_be64(&priv2->slb_vsid_RW, slb->vsid); + /* setting the new esid makes the entry valid again */ out_be64(&priv2->slb_esid_RW, slb->esid); } From c92a1acb675058375cc508ad024c33358b42d766 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 28 Feb 2008 06:06:30 +0100 Subject: [PATCH 12/24] [POWERPC] spufs: serialize SLB invalidation against SLB loading There is a potential race between flushes of the entire SLB in the MFC and the point where new entries are being established. The problem is that we might put a ESID entry into the MFC SLB when the VSID entry has just been cleared by the global flush. This can be circumvented by holding the register_lock throughout both the flushing and the creation of SLB entries. Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index cfc28e93c825..712001f6b7da 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -81,9 +81,12 @@ struct spu_slb { void spu_invalidate_slbs(struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; + unsigned long flags; + spin_lock_irqsave(&spu->register_lock, flags); if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) out_be64(&priv2->slb_invalidate_all_W, 0UL); + spin_unlock_irqrestore(&spu->register_lock, flags); } EXPORT_SYMBOL_GPL(spu_invalidate_slbs); @@ -294,9 +297,11 @@ void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, nr_slbs++; } + spin_lock_irq(&spu->register_lock); /* Add the set of SLBs */ for (i = 0; i < nr_slbs; i++) spu_load_slb(spu, i, &slbs[i]); + spin_unlock_irq(&spu->register_lock); } EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs); @@ -341,13 +346,14 @@ spu_irq_class_1(int irq, void *data) if (stat & CLASS1_STORAGE_FAULT_INTR) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); - spin_unlock(&spu->register_lock); - pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, - dar, dsisr); if (stat & CLASS1_SEGMENT_FAULT_INTR) __spu_trap_data_seg(spu, dar); + spin_unlock(&spu->register_lock); + pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, + dar, dsisr); + if (stat & CLASS1_STORAGE_FAULT_INTR) __spu_trap_data_map(spu, dar, dsisr); From 2a58aa33daef37134c8a43dca0b7578c3fa7f993 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Mon, 25 Feb 2008 15:07:42 -0300 Subject: [PATCH 13/24] [POWERPC] spufs: fix use time accounting on SPE-overcommit The spu_runcntl_RW register is restored within spu_restore function. So, at the end of spu_bind_context, the SPU context is not just loaded, but running. This change corrects the state switch to account the time as USER. Signed-off-by: Andre Detsch Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 3a5972117de7..5d5f680cd0b8 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -246,7 +246,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) spu_switch_notify(spu, ctx); ctx->state = SPU_STATE_RUNNABLE; - spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); + spuctx_switch_state(ctx, SPU_UTIL_USER); } /* From 101fd46a753f8931a05d252bf5564c9415a5f8d7 Mon Sep 17 00:00:00 2001 From: Bob Nelson Date: Wed, 20 Feb 2008 05:00:56 +0100 Subject: [PATCH 14/24] [POWERPC] OProfile: enable callgraph support for Cell This patch enables OProfile callgraph support for the Cell processor. The original code was just calling a function to add the PC value, now it will call a function that first checks the callgraph depth. Callgraph is already enabled on the other Power platforms. Signed-off-by: Bob Nelson Signed-off-by: Arnd Bergmann --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 13929771bee7..9eed1f68fcab 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -1151,7 +1151,7 @@ static void cell_handle_interrupt(struct pt_regs *regs, for (i = 0; i < num_counters; ++i) { if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i)) && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); cbe_write_ctr(cpu, i, reset_value[i]); } } From 9176c0b1f5a9099cebc07458042ae6a7c75af7b2 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 28 Feb 2008 11:26:21 +0100 Subject: [PATCH 15/24] [POWERPC] move celleb DABRX definitions This moves the private DABRX definitions for celleb from beat.h to reg.h to make them usable for all. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/celleb/beat.h | 3 --- include/asm-powerpc/reg.h | 3 +++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h index b2e292df13ca..ac82ac35b991 100644 --- a/arch/powerpc/platforms/celleb/beat.h +++ b/arch/powerpc/platforms/celleb/beat.h @@ -21,9 +21,6 @@ #ifndef _CELLEB_BEAT_H #define _CELLEB_BEAT_H -#define DABRX_KERNEL (1UL<<1) -#define DABRX_USER (1UL<<0) - int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*); int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t); int64_t beat_repository_encode(int, const char *, uint64_t[4]); diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 0d6238987df8..edc0cfd7f6e2 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -153,6 +153,9 @@ #define CTRL_RUNLATCH 0x1 #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ #define DABR_TRANSLATION (1UL << 2) +#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ +#define DABRX_USER (1UL << 0) +#define DABRX_KERNEL (1UL << 1) #define SPRN_DAR 0x013 /* Data Address Register */ #define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ #define DSISR_NOHPTE 0x40000000 /* no translation found */ From f3c1ed9720ec62626bbf3e0c3648568c131978e2 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 28 Feb 2008 11:27:31 +0100 Subject: [PATCH 16/24] [POWERPC] enable hardware watchpoints on cell blades Ulrich Weigand has found that the hardware watchpoints on cell were not working back in November : http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046135.html This patch sets them during initialization. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index a7f609b3b876..dda34650cb07 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -149,6 +149,11 @@ static void __init cell_init_irq(void) mpic_init_IRQ(); } +static void __init cell_set_dabrx(void) +{ + mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); +} + static void __init cell_setup_arch(void) { #ifdef CONFIG_SPU_BASE @@ -158,6 +163,8 @@ static void __init cell_setup_arch(void) cbe_regs_init(); + cell_set_dabrx(); + #ifdef CONFIG_CBE_RAS cbe_ras_init(); #endif From f9660e8a6c16e17935777cdee5194842904c2d72 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:22 +1100 Subject: [PATCH 17/24] [POWERPC] Clearup cell IOMMU fixed mapping terminology It's called the fixed mapping, not the static mapping. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index edab631a8dcb..bbe838996470 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -549,7 +549,7 @@ static void cell_dma_dev_setup_iommu(struct device *dev) archdata->dma_data = &window->table; } -static void cell_dma_dev_setup_static(struct device *dev); +static void cell_dma_dev_setup_fixed(struct device *dev); static void cell_dma_dev_setup(struct device *dev) { @@ -557,7 +557,7 @@ static void cell_dma_dev_setup(struct device *dev) /* Order is important here, these are not mutually exclusive */ if (get_dma_ops(dev) == &dma_iommu_fixed_ops) - cell_dma_dev_setup_static(dev); + cell_dma_dev_setup_fixed(dev); else if (get_pci_dma_ops() == &dma_iommu_ops) cell_dma_dev_setup_iommu(dev); else if (get_pci_dma_ops() == &dma_direct_ops) @@ -858,7 +858,7 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask) return 0; } -static void cell_dma_dev_setup_static(struct device *dev) +static void cell_dma_dev_setup_fixed(struct device *dev) { struct dev_archdata *archdata = &dev->archdata; u64 addr; @@ -894,7 +894,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) { /* Don't touch the dynamic region */ if (i >= dbase && i < (dbase + dsize)) { - pr_debug("iommu: static/dynamic overlap, skipping\n"); + pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); From 0d7386ebffd8506b28c37a7d5541132a576f64e2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:23 +1100 Subject: [PATCH 18/24] [POWERPC] Use it_offset not pte_offset in cell IOMMU code The cell IOMMU tce build and free routines use pte_offset to convert the index passed from the generic IOMMU code into a page table offset. This takes into account the SPIDER_DMA_OFFSET which sets the top bit of every DMA address. However it doesn't cater for the IOMMU window starting at a non-zero address, as the base of the window is not incorporated into pte_offset at all. As it turns out tbl->it_offset already contains the value we need, it takes into account the base of the window and also pte_offset. So use it instead! Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index bbe838996470..4e75919bf6b9 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -200,7 +200,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages, (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); @@ -232,7 +232,7 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages) | (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++) io_pte[i] = pte; From 08e024272e529076663e5b4dc8eeecd4131f8a48 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:23 +1100 Subject: [PATCH 19/24] [POWERPC] Remove unused pte_offset variable The cell IOMMU code no longer needs to save the pte_offset variable separately, it is incorporated into tbl->it_offset. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 4e75919bf6b9..555d264ad568 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -123,7 +123,6 @@ struct iommu_window { struct cbe_iommu *iommu; unsigned long offset; unsigned long size; - unsigned long pte_offset; unsigned int ioid; struct iommu_table table; }; @@ -475,13 +474,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, window->size = size; window->ioid = ioid; window->iommu = iommu; - window->pte_offset = pte_offset; window->table.it_blocksize = 16; window->table.it_base = (unsigned long)iommu->ptab; window->table.it_index = iommu->nid; - window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + - window->pte_offset; + window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset; window->table.it_size = size >> IOMMU_PAGE_SHIFT; iommu_init_table(&window->table, iommu->nid); From edf441fb80f9d7a962c298e8da94c8c64802fffa Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:24 +1100 Subject: [PATCH 20/24] [POWERPC] Move allocation of cell IOMMU pad page There's no need to allocate the pad page unless we're going to actually use it - so move the allocation to where we know we're going to use it. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 555d264ad568..8e57e1af3785 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -344,12 +344,6 @@ static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, iommu->ptab = page_address(page); memset(iommu->ptab, 0, ptab_size); - /* allocate a bogus page for the end of each mapping */ - page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); - BUG_ON(!page); - iommu->pad_page = page_address(page); - clear_page(iommu->pad_page); - /* number of pages needed for a page table */ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; @@ -463,6 +457,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, unsigned long pte_offset) { struct iommu_window *window; + struct page *page; u32 ioid; ioid = cell_iommu_get_ioid(np); @@ -501,6 +496,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, * This code also assumes that we have a window that starts at 0, * which is the case on all spider based blades. */ + page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); + BUG_ON(!page); + iommu->pad_page = page_address(page); + clear_page(iommu->pad_page); + __set_bit(0, window->table.it_map); tce_build_cell(&window->table, window->table.it_offset, 1, (unsigned long)iommu->pad_page, DMA_TO_DEVICE); From 7d432ff1b7db87e78eb74d42631d2a23ca6f26f2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:25 +1100 Subject: [PATCH 21/24] [POWERPC] Split setup of IOMMU stab and ptab, allocate dynamic/fixed ptabs separately Currently the cell IOMMU code allocates the entire IOMMU page table in a contiguous chunk. This is nice and tidy, but for machines with larger amounts of RAM the page table allocation can fail due to it simply being too large. So split the segment table and page table setup routine, and arrange to have the dynamic and fixed page tables allocated separately. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 69 ++++++++++++++++++----------- 1 file changed, 43 insertions(+), 26 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 8e57e1af3785..187a723eafcd 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -306,50 +306,54 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base) return -ENODEV; } -static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, +static void cell_iommu_setup_stab(struct cbe_iommu *iommu, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { struct page *page; - int i; - unsigned long reg, segments, pages_per_segment, ptab_size, stab_size, - n_pte_pages, base; - - base = dbase; - if (fsize != 0) - base = min(fbase, dbase); + unsigned long segments, stab_size; segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; - pages_per_segment = 1ull << IO_PAGENO_BITS; - pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n", - __FUNCTION__, iommu->nid, segments, pages_per_segment); + pr_debug("%s: iommu[%d]: segments: %lu\n", + __FUNCTION__, iommu->nid, segments); /* set up the segment table */ stab_size = segments * sizeof(unsigned long); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); BUG_ON(!page); iommu->stab = page_address(page); - clear_page(iommu->stab); + memset(iommu->stab, 0, stab_size); +} + +static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, + unsigned long base, unsigned long size, unsigned long gap_base, + unsigned long gap_size) +{ + struct page *page; + int i; + unsigned long reg, segments, pages_per_segment, ptab_size, + n_pte_pages, start_seg, *ptab; + + start_seg = base >> IO_SEGMENT_SHIFT; + segments = size >> IO_SEGMENT_SHIFT; + pages_per_segment = 1ull << IO_PAGENO_BITS; - /* ... and the page tables. Since these are contiguous, we can treat - * the page tables as one array of ptes, like pSeries does. - */ ptab_size = segments * pages_per_segment * sizeof(unsigned long); pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, iommu->nid, ptab_size, get_order(ptab_size)); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); BUG_ON(!page); - iommu->ptab = page_address(page); - memset(iommu->ptab, 0, ptab_size); + ptab = page_address(page); + memset(ptab, 0, ptab_size); /* number of pages needed for a page table */ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", - __FUNCTION__, iommu->nid, iommu->stab, iommu->ptab, + __FUNCTION__, iommu->nid, iommu->stab, ptab, n_pte_pages); /* initialise the STEs */ @@ -364,12 +368,21 @@ static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, __unknown_page_size_error(); } + gap_base = gap_base >> IO_SEGMENT_SHIFT; + gap_size = gap_size >> IO_SEGMENT_SHIFT; + pr_debug("Setting up IOMMU stab:\n"); - for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) { - iommu->stab[i] = reg | - (__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i); + for (i = start_seg; i < (start_seg + segments); i++) { + if (i >= gap_base && i < (gap_base + gap_size)) { + pr_debug("\toverlap at %d, skipping\n", i); + continue; + } + iommu->stab[i] = reg | (__pa(ptab) + n_pte_pages * + IOMMU_PAGE_SIZE * (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } + + return ptab; } static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) @@ -416,7 +429,8 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { - cell_iommu_setup_page_tables(iommu, base, size, 0, 0); + cell_iommu_setup_stab(iommu, base, size, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0); cell_iommu_enable_hardware(iommu); } @@ -870,8 +884,10 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { - unsigned long base_pte, uaddr, *io_pte; int i; + unsigned long base_pte, uaddr, *io_pte, *ptab; + + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize); dma_iommu_fixed_base = fbase; @@ -883,7 +899,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - io_pte = iommu->ptab; + io_pte = ptab; base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); @@ -894,7 +910,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } - io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + io_pte[i - fbase] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); } mb(); @@ -992,7 +1008,8 @@ static int __init cell_iommu_fixed_mapping_init(void) "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, dbase + dsize, fbase, fbase + fsize); - cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize); + cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); + iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); From 3d3e6da17d6af42a3fd4891fb09d93dca002e590 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:26 +1100 Subject: [PATCH 22/24] [POWERPC] Cell IOMMU: n_pte_pages is in 4K page units, not IOMMU_PAGE_SIZE We use n_pte_pages to calculate the stride through the page tables, but we also use it to set the NPPT value in the segment table entry. That is defined as the number of 4K pages per segment, so we should calculate it as such regardless of the IOMMU page size. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 187a723eafcd..7a861cb960d2 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -348,9 +348,8 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, ptab = page_address(page); memset(ptab, 0, ptab_size); - /* number of pages needed for a page table */ - n_pte_pages = (pages_per_segment * - sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; + /* number of 4K pages needed for a page table */ + n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", __FUNCTION__, iommu->nid, iommu->stab, ptab, @@ -377,8 +376,8 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, pr_debug("\toverlap at %d, skipping\n", i); continue; } - iommu->stab[i] = reg | (__pa(ptab) + n_pte_pages * - IOMMU_PAGE_SIZE * (i - start_seg)); + iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * + (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } From 225d49050f9b6506f2f9df6b40e591ee93939d11 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:27 +1100 Subject: [PATCH 23/24] [POWERPC] Allow for different IOMMU page sizes in cell IOMMU code Make some preliminary changes to cell_iommu_alloc_ptab() to allow it to take the page size as a parameter rather than assuming IOMMU_PAGE_SIZE. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 31 +++++++++++++++++------------ 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 7a861cb960d2..b0e347e4933a 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -113,7 +113,7 @@ /* IOMMU sizing */ #define IO_SEGMENT_SHIFT 28 -#define IO_PAGENO_BITS (IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT) +#define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) /* The high bit needs to be set on every DMA address */ #define SPIDER_DMA_OFFSET 0x80000000ul @@ -328,7 +328,7 @@ static void cell_iommu_setup_stab(struct cbe_iommu *iommu, static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, unsigned long base, unsigned long size, unsigned long gap_base, - unsigned long gap_size) + unsigned long gap_size, unsigned long page_shift) { struct page *page; int i; @@ -337,7 +337,10 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, start_seg = base >> IO_SEGMENT_SHIFT; segments = size >> IO_SEGMENT_SHIFT; - pages_per_segment = 1ull << IO_PAGENO_BITS; + pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); + /* PTEs for each segment must start on a 4K bounday */ + pages_per_segment = max(pages_per_segment, + (1 << 12) / sizeof(unsigned long)); ptab_size = segments * pages_per_segment * sizeof(unsigned long); pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, @@ -358,13 +361,12 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, /* initialise the STEs */ reg = IOSTE_V | ((n_pte_pages - 1) << 5); - if (IOMMU_PAGE_SIZE == 0x1000) - reg |= IOSTE_PS_4K; - else if (IOMMU_PAGE_SIZE == 0x10000) - reg |= IOSTE_PS_64K; - else { - extern void __unknown_page_size_error(void); - __unknown_page_size_error(); + switch (page_shift) { + case 12: reg |= IOSTE_PS_4K; break; + case 16: reg |= IOSTE_PS_64K; break; + case 20: reg |= IOSTE_PS_1M; break; + case 24: reg |= IOSTE_PS_16M; break; + default: BUG(); } gap_base = gap_base >> IO_SEGMENT_SHIFT; @@ -429,7 +431,8 @@ static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { cell_iommu_setup_stab(iommu, base, size, 0, 0); - iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_enable_hardware(iommu); } @@ -886,7 +889,8 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, int i; unsigned long base_pte, uaddr, *io_pte, *ptab; - ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize); + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, + IOMMU_PAGE_SHIFT); dma_iommu_fixed_base = fbase; @@ -1008,7 +1012,8 @@ static int __init cell_iommu_fixed_mapping_init(void) dbase + dsize, fbase, fbase + fsize); cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); - iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); From da40451bba23b51eaca4170a095891646ce72104 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:29 +1100 Subject: [PATCH 24/24] [POWERPC] Convert the cell IOMMU fixed mapping to 16M IOMMU pages The only tricky part is we need to adjust the PTE insertion loop to cater for holes in the page table. The PTEs for each segment start on a 4K boundary, so with 16M pages we have 16 PTEs per segment and then a gap to the next 4K page boundary. It might be possible to allocate the PTEs for each segment separately, saving the memory currently filling the gaps. However we'd need to check that's OK with the hardware, and that it actually saves memory. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 37 +++++++++++++++++------------ 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index b0e347e4933a..20ea0e118f24 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -882,38 +882,45 @@ static void cell_dma_dev_setup_fixed(struct device *dev) dev_dbg(dev, "iommu: fixed addr = %lx\n", addr); } +static void insert_16M_pte(unsigned long addr, unsigned long *ptab, + unsigned long base_pte) +{ + unsigned long segment, offset; + + segment = addr >> IO_SEGMENT_SHIFT; + offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); + ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); + + pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", + addr, ptab, segment, offset); + + ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask); +} + static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { - int i; - unsigned long base_pte, uaddr, *io_pte, *ptab; + unsigned long base_pte, uaddr, ioaddr, *ptab; - ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, - IOMMU_PAGE_SHIFT); + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); dma_iommu_fixed_base = fbase; - /* convert from bytes into page table indices */ - dbase = dbase >> IOMMU_PAGE_SHIFT; - dsize = dsize >> IOMMU_PAGE_SHIFT; - fbase = fbase >> IOMMU_PAGE_SHIFT; - fsize = fsize >> IOMMU_PAGE_SHIFT; - pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - io_pte = ptab; base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); - uaddr = 0; - for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) { + for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { /* Don't touch the dynamic region */ - if (i >= dbase && i < (dbase + dsize)) { + ioaddr = uaddr + fbase; + if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } - io_pte[i - fbase] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + + insert_16M_pte(uaddr, ptab, base_pte); } mb();