V4L/DVB (9824): m52790: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Hans Verkuil 2008-11-29 12:51:32 -03:00 коммит произвёл Mauro Carvalho Chehab
Родитель 9357b31c6c
Коммит 5d302f2e2c
1 изменённых файлов: 116 добавлений и 70 удалений

Просмотреть файл

@ -28,7 +28,7 @@
#include <linux/i2c-id.h>
#include <linux/videodev2.h>
#include <media/m52790.h>
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
@ -38,90 +38,131 @@ MODULE_LICENSE("GPL");
struct m52790_state {
struct v4l2_subdev sd;
u16 input;
u16 output;
};
static inline struct m52790_state *to_state(struct v4l2_subdev *sd)
{
return container_of(sd, struct m52790_state, sd);
}
/* ----------------------------------------------------------------------- */
static int m52790_write(struct i2c_client *client)
static int m52790_write(struct v4l2_subdev *sd)
{
struct m52790_state *state = i2c_get_clientdata(client);
struct m52790_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
u8 sw1 = (state->input | state->output) & 0xff;
u8 sw2 = (state->input | state->output) >> 8;
return i2c_smbus_write_byte_data(client, sw1, sw2);
}
static int m52790_command(struct i2c_client *client, unsigned int cmd,
void *arg)
/* Note: audio and video are linked and cannot be switched separately.
So audio and video routing commands are identical for this chip.
In theory the video amplifier and audio modes could be handled
separately for the output, but that seems to be overkill right now.
The same holds for implementing an audio mute control, this is now
part of the audio output routing. The normal case is that another
chip takes care of the actual muting so making it part of the
output routing seems to be the right thing to do for now. */
static int m52790_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
{
struct m52790_state *state = i2c_get_clientdata(client);
struct v4l2_routing *route = arg;
struct m52790_state *state = to_state(sd);
/* Note: audio and video are linked and cannot be switched separately.
So audio and video routing commands are identical for this chip.
In theory the video amplifier and audio modes could be handled
separately for the output, but that seems to be overkill right now.
The same holds for implementing an audio mute control, this is now
part of the audio output routing. The normal case is that another
chip takes care of the actual muting so making it part of the
output routing seems to be the right thing to do for now. */
switch (cmd) {
case VIDIOC_INT_G_AUDIO_ROUTING:
case VIDIOC_INT_G_VIDEO_ROUTING:
route->input = state->input;
route->output = state->output;
break;
case VIDIOC_INT_S_AUDIO_ROUTING:
case VIDIOC_INT_S_VIDEO_ROUTING:
state->input = route->input;
state->output = route->output;
m52790_write(client);
break;
#ifdef CONFIG_VIDEO_ADV_DEBUG
case VIDIOC_DBG_G_REGISTER:
case VIDIOC_DBG_S_REGISTER:
{
struct v4l2_register *reg = arg;
if (!v4l2_chip_match_i2c_client(client,
reg->match_type, reg->match_chip))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (reg->reg != 0)
return -EINVAL;
if (cmd == VIDIOC_DBG_G_REGISTER)
reg->val = state->input | state->output;
else {
state->input = reg->val & 0x0303;
state->output = reg->val & ~0x0303;
m52790_write(client);
}
break;
}
#endif
case VIDIOC_G_CHIP_IDENT:
return v4l2_chip_ident_i2c_client(client, arg,
V4L2_IDENT_M52790, 0);
case VIDIOC_LOG_STATUS:
v4l_info(client, "Switch 1: %02x\n",
(state->input | state->output) & 0xff);
v4l_info(client, "Switch 2: %02x\n",
(state->input | state->output) >> 8);
break;
default:
return -EINVAL;
}
state->input = route->input;
state->output = route->output;
m52790_write(sd);
return 0;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int m52790_g_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
{
struct m52790_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
if (!v4l2_chip_match_i2c_client(client,
reg->match_type, reg->match_chip))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (reg->reg != 0)
return -EINVAL;
reg->val = state->input | state->output;
return 0;
}
static int m52790_s_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
{
struct m52790_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
if (!v4l2_chip_match_i2c_client(client,
reg->match_type, reg->match_chip))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (reg->reg != 0)
return -EINVAL;
state->input = reg->val & 0x0303;
state->output = reg->val & ~0x0303;
m52790_write(sd);
return 0;
}
#endif
static int m52790_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_M52790, 0);
}
static int m52790_log_status(struct v4l2_subdev *sd)
{
struct m52790_state *state = to_state(sd);
v4l2_info(sd, "Switch 1: %02x\n",
(state->input | state->output) & 0xff);
v4l2_info(sd, "Switch 2: %02x\n",
(state->input | state->output) >> 8);
return 0;
}
static int m52790_command(struct i2c_client *client, unsigned cmd, void *arg)
{
return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops m52790_core_ops = {
.log_status = m52790_log_status,
.g_chip_ident = m52790_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = m52790_g_register,
.s_register = m52790_s_register,
#endif
};
static const struct v4l2_subdev_audio_ops m52790_audio_ops = {
.s_routing = m52790_s_routing,
};
static const struct v4l2_subdev_video_ops m52790_video_ops = {
.s_routing = m52790_s_routing,
};
static const struct v4l2_subdev_ops m52790_ops = {
.core = &m52790_core_ops,
.audio = &m52790_audio_ops,
.video = &m52790_video_ops,
};
/* ----------------------------------------------------------------------- */
/* i2c implementation */
@ -130,6 +171,7 @@ static int m52790_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct m52790_state *state;
struct v4l2_subdev *sd;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@ -142,16 +184,20 @@ static int m52790_probe(struct i2c_client *client,
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &m52790_ops);
state->input = M52790_IN_TUNER;
state->output = M52790_OUT_STEREO;
i2c_set_clientdata(client, state);
m52790_write(client);
m52790_write(sd);
return 0;
}
static int m52790_remove(struct i2c_client *client)
{
kfree(i2c_get_clientdata(client));
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
kfree(to_state(sd));
return 0;
}