As ever there's a lot of small and driver specific changes going on
 here, but we do also have some relatively large changes in the core
 thanks to the hard work of Charles and Morimoto-san:
 
  - More component transitions from Morimoto-san, I think we're about
    finished with this.  Thanks for all the hard work!
  - Morimoto-san also added a bunch of for_each_foo macros
  - A bunch of cleanups and fixes for DAPM from Charles.
  - MCLK support for several different devices, including CS42L51, STM32
    SAI, and MAX98373.
  - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
    MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
    TI PCM3060.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNuPoTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0CsxB/91P2RgcUhBSkPO3jsFSerc+RccqD8j
 XogqjC62V2T3xqVUYtqqLf0dZFKUPFNoFitN2XdNU36H55DVI+3wxxmwObc64RIc
 uB6ptQuwFz7vGeF6r6GWFUAZ7MB518dq/oZYRKrjAW49Lt2YiCD0HJ2gi+0Hm66A
 53I7SLH3Q386UHDd+dl7+9BN7gPt0OIKAdsc/Vq7BDYvP+cNEm+YYjXGwaHjLLEC
 o8vmj8Ny6x0dytdYuQ/XuekBhGopcfqTbWTpTu43/jCd5rumQXQY2g9CC1eRMlEJ
 cm1hOjAErmKkkg2S84B1cMAvK23Szu36sPyeCphSQWOhlL4CFPVyJqic
 =9A07
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.0/v4.20

As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:

 - More component transitions from Morimoto-san, I think we're about
   finished with this.  Thanks for all the hard work!
 - Morimoto-san also added a bunch of for_each_foo macros
 - A bunch of cleanups and fixes for DAPM from Charles.
 - MCLK support for several different devices, including CS42L51, STM32
   SAI, and MAX98373.
 - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
   MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
   TI PCM3060.
This commit is contained in:
Takashi Iwai 2018-10-22 23:26:37 +02:00
Родитель b5a229350b 65dfb6d6dd
Коммит 5e3cdecf78
1680 изменённых файлов: 24443 добавлений и 11295 удалений

Просмотреть файл

@ -73,3 +73,12 @@ KernelVersion: 3.0
Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Description:
Number of sectors written by the frontend.
What: /sys/bus/xen-backend/devices/*/state
Date: August 2018
KernelVersion: 4.19
Contact: Joe Jin <joe.jin@oracle.com>
Description:
The state of the device. One of: 'Unknown',
'Initialising', 'Initialised', 'Connected', 'Closing',
'Closed', 'Reconfiguring', 'Reconfigured'.

Просмотреть файл

@ -75,3 +75,12 @@ Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Description:
Amount (in KiB) of low (or normal) memory in the
balloon.
What: /sys/devices/system/xen_memory/xen_memory0/scrub_pages
Date: September 2018
KernelVersion: 4.20
Contact: xen-devel@lists.xenproject.org
Description:
Control scrubbing pages before returning them to Xen for others domains
use. Can be set with xen_scrub_pages cmdline
parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.

Просмотреть файл

@ -15,3 +15,13 @@ Description:
blkback. If the frontend tries to use more than
max_persistent_grants, the LRU kicks in and starts
removing 5% of max_persistent_grants every 100ms.
What: /sys/module/xen_blkback/parameters/persistent_grant_unused_seconds
Date: August 2018
KernelVersion: 4.19
Contact: Roger Pau Monné <roger.pau@citrix.com>
Description:
How long a persistent grant is allowed to remain
allocated without being in use. The time is in
seconds, 0 means indefinitely long.
The default is 60 seconds.

Просмотреть файл

@ -3523,6 +3523,12 @@
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
See Documentation/blockdev/ramdisk.txt.
random.trust_cpu={on,off}
[KNL] Enable or disable trusting the use of the
CPU's random number generator (if available) to
fully seed the kernel's CRNG. Default is controlled
by CONFIG_RANDOM_TRUST_CPU.
ras=option[,option,...] [KNL] RAS-specific options
cec_disable [X86]
@ -4994,6 +5000,12 @@
Disables the PV optimizations forcing the HVM guest to
run as generic HVM guest with no PV drivers.
xen_scrub_pages= [XEN]
Boolean option to control scrubbing pages before giving them back
to Xen, for use by other domains. Can be also changed at runtime
with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
xirc2ps_cs= [NET,PCMCIA]
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

Просмотреть файл

@ -200,7 +200,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
thread.
* Changing the vector length causes all of P0..P15, FFR and all bits of
Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current
vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
flag, does not constitute a change to the vector length for this purpose.
@ -500,7 +500,7 @@ References
[2] arch/arm64/include/uapi/asm/ptrace.h
AArch64 Linux ptrace ABI definitions
[3] linux/Documentation/arm64/cpu-feature-registers.txt
[3] Documentation/arm64/cpu-feature-registers.txt
[4] ARM IHI0055C
http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf

Просмотреть файл

@ -348,3 +348,7 @@ Version History
1.13.1 Fix deadlock caused by early md_stop_writes(). Also fix size an
state races.
1.13.2 Fix raid redundancy validation and avoid keeping raid set frozen
1.14.0 Fix reshape race on small devices. Fix stripe adding reshape
deadlock/potential data corruption. Update superblock when
specific devices are requested via rebuild. Fix RAID leg
rebuild errors.

Просмотреть файл

@ -3,7 +3,6 @@
Required properties:
- compatible :
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
- "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
- reg : address and length of the lpi2c master registers
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
@ -11,7 +10,7 @@ Required properties:
Examples:
lpi2c7: lpi2c7@40a50000 {
compatible = "fsl,imx8dv-lpi2c";
compatible = "fsl,imx7ulp-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

Просмотреть файл

@ -1,4 +1,4 @@
Device-Tree bindings for input/gpio_keys.c keyboard driver
Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
Required properties:
- compatible = "gpio-keys";

Просмотреть файл

@ -11,7 +11,7 @@ The RISC-V supervisor ISA manual specifies three interrupt sources that are
attached to every HLIC: software interrupts, the timer interrupt, and external
interrupts. Software interrupts are used to send IPIs between cores. The
timer interrupt comes from an architecturally mandated real-time timer that is
controller via Supervisor Binary Interface (SBI) calls and CSR reads. External
controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External
interrupts connect all other device interrupts to the HLIC, which are routed
via the platform-level interrupt controller (PLIC).
@ -25,7 +25,15 @@ in the system.
Required properties:
- compatible : "riscv,cpu-intc"
- #interrupt-cells : should be <1>
- #interrupt-cells : should be <1>. The interrupt sources are defined by the
RISC-V supervisor ISA manual, with only the following three interrupts being
defined for supervisor mode:
- Source 1 is the supervisor software interrupt, which can be sent by an SBI
call and is reserved for use by software.
- Source 5 is the supervisor timer interrupt, which can be configured by
SBI calls and implements a one-shot timer.
- Source 9 is the supervisor external interrupt, which chains to all other
device interrupts.
- interrupt-controller : Identifies the node as an interrupt controller
Furthermore, this interrupt-controller MUST be embedded inside the cpu
@ -38,7 +46,7 @@ An example device tree entry for a HLIC is show below.
...
cpu1-intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
interrupt-controller;
};
};

Просмотреть файл

@ -19,6 +19,10 @@ Required properties:
- slaves : Specifies number for slaves
- active_slave : Specifies the slave to use for time stamping,
ethtool and SIOCGMIIPHY
- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection
device. See also cpsw-phy-sel.txt for it's binding.
Note that in legacy cases cpsw-phy-sel may be
a child device instead of a phandle.
Optional properties:
- ti,hwmods : Must be "cpgmac0"
@ -75,6 +79,7 @@ Examples:
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
cpsw-phy-sel = <&phy_sel>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
@ -103,6 +108,7 @@ Examples:
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
cpsw-phy-sel = <&phy_sel>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";

Просмотреть файл

@ -10,6 +10,7 @@ Required properties:
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.

Просмотреть файл

@ -16,6 +16,7 @@ Required properties:
"renesas,ether-r8a7794" if the device is a part of R8A7794 SoC.
"renesas,gether-r8a77980" if the device is a part of R8A77980 SoC.
"renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
"renesas,ether-r7s9210" if the device is a part of R7S9210 SoC.
"renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
"renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
device.

Просмотреть файл

@ -0,0 +1,54 @@
Analog Devices ADAU1977/ADAU1978/ADAU1979
Datasheets:
http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
This driver supports both the I2C and SPI bus.
Required properties:
- compatible: Should contain one of the following:
"adi,adau1977"
"adi,adau1978"
"adi,adau1979"
- AVDD-supply: analog power supply for the device, please consult
Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
- reset-gpio: the reset pin for the chip, for more details consult
Documentation/devicetree/bindings/gpio/gpio.txt
- DVDD-supply: supply voltage for the digital core, please consult
Documentation/devicetree/bindings/regulator/regulator.txt
For required properties on SPI, please consult
Documentation/devicetree/bindings/spi/spi-bus.txt
Required properties on I2C:
- reg: The i2c address. Value depends on the state of ADDR0
and ADDR1, as wired in hardware.
Examples:
adau1977_spi: adau1977@0 {
compatible = "adi,adau1977";
spi-max-frequency = <600000>;
AVDD-supply = <&regulator>;
DVDD-supply = <&regulator_digital>;
reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
};
adau1977_i2c: adau1977@11 {
compatible = "adi,adau1977";
reg = <0x11>;
AVDD-supply = <&regulator>;
DVDD-supply = <&regulator_digital>;
reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
};

Просмотреть файл

@ -0,0 +1,24 @@
* Amlogic Audio PDM input
Required properties:
- compatible: 'amlogic,axg-pdm'
- reg: physical base address of the controller and length of memory
mapped region.
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
* "pclk" : peripheral clock.
* "dclk" : pdm digital clock
* "sysclk" : dsp system clock
- #sound-dai-cells: must be 0.
Example of PDM on the A113 SoC:
pdm: audio-controller@ff632000 {
compatible = "amlogic,axg-pdm";
reg = <0x0 0xff632000 0x0 0x34>;
#sound-dai-cells = <0>;
clocks = <&clkc_audio AUD_CLKID_PDM>,
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
};

Просмотреть файл

@ -0,0 +1,17 @@
CS42L51 audio CODEC
Optional properties:
- clocks : a list of phandles + clock-specifiers, one for each entry in
clock-names
- clock-names : must contain "MCLK"
Example:
cs42l51: cs42l51@4a {
compatible = "cirrus,cs42l51";
reg = <0x4a>;
clocks = <&mclk_prov>;
clock-names = "MCLK";
};

Просмотреть файл

@ -0,0 +1,23 @@
MAX98088 audio CODEC
This device supports I2C only.
Required properties:
- compatible: "maxim,max98088" or "maxim,max98089".
- reg: The I2C address of the device.
Optional properties:
- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section
"consumer" for more information.
- clock-names: must be set to "mclk"
Example:
max98089: codec@10 {
compatible = "maxim,max98089";
reg = <0x10>;
clocks = <&clks IMX6QDL_CLK_CKO2>;
clock-names = "mclk";
};

Просмотреть файл

@ -0,0 +1,23 @@
Mikroe-PROTO audio board
Required properties:
- compatible: "mikroe,mikroe-proto"
- dai-format: Must be "i2s".
- i2s-controller: The phandle of the I2S controller.
- audio-codec: The phandle of the WM8731 audio codec.
Optional properties:
- model: The user-visible name of this sound complex.
- bitclock-master: Indicates dai-link bit clock master; for details see simple-card.txt (1).
- frame-master: Indicates dai-link frame master; for details see simple-card.txt (1).
(1) : There must be the same master for both bit and frame clocks.
Example:
sound {
compatible = "mikroe,mikroe-proto";
model = "wm8731 @ sama5d2_xplained";
i2s-controller = <&i2s0>;
audio-codec = <&wm8731>;
dai-format = "i2s";
};
};

Просмотреть файл

@ -0,0 +1,16 @@
NAU8822 audio CODEC
This device supports I2C only.
Required properties:
- compatible : "nuvoton,nau8822"
- reg : the I2C address of the device.
Example:
codec: nau8822@1a {
compatible = "nuvoton,nau8822";
reg = <0x1a>;
};

Просмотреть файл

@ -0,0 +1,17 @@
PCM3060 audio CODEC
This driver supports both I2C and SPI.
Required properties:
- compatible: "ti,pcm3060"
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
Examples:
pcm3060: pcm3060@46 {
compatible = "ti,pcm3060";
reg = <0x46>;
};

Просмотреть файл

@ -49,7 +49,7 @@ configuration of each dai. Must contain the following properties.
Usage: required for mi2s interface
Value type: <prop-encoded-array>
Definition: Must be list of serial data lines used by this dai.
should be one or more of the 1-4 sd lines.
should be one or more of the 0-3 sd lines.
- qcom,tdm-sync-mode:
Usage: required for tdm interface
@ -137,42 +137,42 @@ q6afe@4 {
prim-mi2s-rx@16 {
reg = <16>;
qcom,sd-lines = <1 3>;
qcom,sd-lines = <0 2>;
};
prim-mi2s-tx@17 {
reg = <17>;
qcom,sd-lines = <2>;
qcom,sd-lines = <1>;
};
sec-mi2s-rx@18 {
reg = <18>;
qcom,sd-lines = <1 4>;
qcom,sd-lines = <0 3>;
};
sec-mi2s-tx@19 {
reg = <19>;
qcom,sd-lines = <2>;
qcom,sd-lines = <1>;
};
tert-mi2s-rx@20 {
reg = <20>;
qcom,sd-lines = <2 4>;
qcom,sd-lines = <1 3>;
};
tert-mi2s-tx@21 {
reg = <21>;
qcom,sd-lines = <1>;
qcom,sd-lines = <0>;
};
quat-mi2s-rx@22 {
reg = <22>;
qcom,sd-lines = <1>;
qcom,sd-lines = <0>;
};
quat-mi2s-tx@23 {
reg = <23>;
qcom,sd-lines = <2>;
qcom,sd-lines = <1>;
};
};
};

Просмотреть файл

@ -340,10 +340,12 @@ Required properties:
- compatible : "renesas,rcar_sound-<soctype>", fallbacks
"renesas,rcar_sound-gen1" if generation1, and
"renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
"renesas,rcar_sound-gen3" if generation3
"renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
Examples with soctypes are:
- "renesas,rcar_sound-r8a7743" (RZ/G1M)
- "renesas,rcar_sound-r8a7744" (RZ/G1N)
- "renesas,rcar_sound-r8a7745" (RZ/G1E)
- "renesas,rcar_sound-r8a774a1" (RZ/G2M)
- "renesas,rcar_sound-r8a7778" (R-Car M1A)
- "renesas,rcar_sound-r8a7779" (R-Car H1)
- "renesas,rcar_sound-r8a7790" (R-Car H2)
@ -353,6 +355,7 @@ Required properties:
- "renesas,rcar_sound-r8a7795" (R-Car H3)
- "renesas,rcar_sound-r8a7796" (R-Car M3-W)
- "renesas,rcar_sound-r8a77965" (R-Car M3-N)
- "renesas,rcar_sound-r8a77990" (R-Car E3)
- reg : Should contain the register physical address.
required register is
SRU/ADG/SSI if generation1

Просмотреть файл

@ -19,6 +19,10 @@ Required properties:
Optional properties:
- clocks, clock-names: Clock specifier for XTI input clock.
If specified, the clock will be enabled when the codec is probed,
and disabled when it is removed. The 'clock-names' must be set to 'xti'.
- st,output-conf: number, Selects the output configuration:
0: 2-channel (full-bridge) power, 2-channel data-out
1: 2 (half-bridge). 1 (full-bridge) on-board power
@ -39,6 +43,9 @@ Optional properties:
- st,thermal-warning-recover:
If present, thermal warning recovery is enabled.
- st,fault-detect-recovery:
If present, fault detect recovery is enabled.
- st,thermal-warning-adjustment:
If present, thermal warning adjustment is enabled.
@ -76,6 +83,8 @@ Example:
codec: sta32x@38 {
compatible = "st,sta32x";
reg = <0x1c>;
clocks = <&clock>;
clock-names = "xti";
reset-gpios = <&gpio1 19 0>;
power-down-gpios = <&gpio1 16 0>;
st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel

Просмотреть файл

@ -31,7 +31,11 @@ SAI subnodes required properties:
- reg: Base address and size of SAI sub-block register set.
- clocks: Must contain one phandle and clock specifier pair
for sai_ck which feeds the internal clock generator.
If the SAI shares a master clock, with another SAI set as MCLK
clock provider, SAI provider phandle must be specified here.
- clock-names: Must contain "sai_ck".
Must also contain "MCLK", if SAI shares a master clock,
with a SAI set as MCLK clock provider.
- dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
- dma-names: identifier string for each DMA request line
"tx": if sai sub-block is configured as playback DAI
@ -51,6 +55,9 @@ SAI subnodes Optional properties:
configured according to protocol defined in related DAI link node,
such as i2s, left justified, right justified, dsp and pdm protocols.
Note: ac97 protocol is not supported by SAI driver
- #clock-cells: should be 0. This property must be present if the SAI device
is a master clock provider, according to clocks bindings, described in
Documentation/devicetree/bindings/clock/clock-bindings.txt.
The device node should contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in Documentation/devicetree/bindings/

Просмотреть файл

@ -10,6 +10,7 @@ Required properties:
- "allwinner,sun6i-a31-i2s"
- "allwinner,sun8i-a83t-i2s"
- "allwinner,sun8i-h3-i2s"
- "allwinner,sun50i-a64-codec-i2s"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
@ -26,6 +27,7 @@ Required properties for the following compatibles:
- "allwinner,sun6i-a31-i2s"
- "allwinner,sun8i-a83t-i2s"
- "allwinner,sun8i-h3-i2s"
- "allwinner,sun50i-a64-codec-i2s"
- resets: phandle to the reset line for this codec
Example:

Просмотреть файл

@ -0,0 +1,12 @@
* Allwinner A64 Codec Analog Controls
Required properties:
- compatible: must be one of the following compatibles:
- "allwinner,sun50i-a64-codec-analog"
- reg: must contain the registers location and length
Example:
codec_analog: codec-analog@1f015c0 {
compatible = "allwinner,sun50i-a64-codec-analog";
reg = <0x01f015c0 0x4>;
};

Просмотреть файл

@ -14,7 +14,7 @@ Required properties:
Optional properies:
- ti,micbias: Intended MICBIAS voltage (datasheet section 9.6.7).
Select 0/1/2/3/4/5/6/7 to specify MACBIAS voltage
Select 0/1/2/3/4/5/6/7 to specify MICBIAS voltage
2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
Default value is "1" (2.2V).

Просмотреть файл

@ -0,0 +1,17 @@
WM8782 stereo ADC
This device does not have any control interface or reset pins.
Required properties:
- compatible : "wlf,wm8782"
- Vdda-supply : phandle to a regulator for the analog power supply (2.7V - 5.5V)
- Vdd-supply : phandle to a regulator for the digital power supply (2.7V - 3.6V)
Example:
wm8782: stereo-adc {
compatible = "wlf,wm8782";
Vdda-supply = <&vdda_supply>;
Vdd-supply = <&vdd_supply>;
};

Просмотреть файл

@ -35,7 +35,6 @@ at,24c08 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
capella,cm32181 CM32181: Ambient Light Sensor
capella,cm3232 CM3232: Ambient Light Sensor
cirrus,cs42l51 Cirrus Logic CS42L51 audio codec
dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
dallas,ds1631 High-Precision Digital Thermometer
dallas,ds1672 Dallas DS1672 Real-time Clock

Просмотреть файл

@ -235,6 +235,7 @@ micrel Micrel Inc.
microchip Microchip Technology Inc.
microcrystal Micro Crystal AG
micron Micron Technology Inc.
mikroe MikroElektronika d.o.o.
minix MINIX Technology Ltd.
miramems MiraMEMS Sensing Technology Co., Ltd.
mitsubishi Mitsubishi Electric Corporation

Просмотреть файл

@ -7,6 +7,7 @@ Required properties:
Examples with soctypes are:
- "renesas,r8a7743-wdt" (RZ/G1M)
- "renesas,r8a7745-wdt" (RZ/G1E)
- "renesas,r8a774a1-wdt" (RZ/G2M)
- "renesas,r8a7790-wdt" (R-Car H2)
- "renesas,r8a7791-wdt" (R-Car M2-W)
- "renesas,r8a7792-wdt" (R-Car V2H)
@ -21,8 +22,8 @@ Required properties:
- "renesas,r7s72100-wdt" (RZ/A1)
The generic compatible string must be:
- "renesas,rza-wdt" for RZ/A
- "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G
- "renesas,rcar-gen3-wdt" for R-Car Gen3
- "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
- "renesas,rcar-gen3-wdt" for R-Car Gen3 and RZ/G2
- reg : Should contain WDT registers location and length
- clocks : the clock feeding the watchdog timer.

Просмотреть файл

@ -184,6 +184,11 @@ API for implementing a new FPGA Manager driver
API for programming an FPGA
---------------------------
FPGA Manager flags
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:doc: FPGA Manager flags
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_image_info

Просмотреть файл

@ -15,7 +15,8 @@ than x86. Check the v86d documentation for a list of currently supported
arches.
v86d source code can be downloaded from the following website:
http://dev.gentoo.org/~spock/projects/uvesafb
https://github.com/mjanusz/v86d
Please refer to the v86d documentation for detailed configuration and
installation instructions.
@ -177,7 +178,7 @@ from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo.
--
Michal Januszewski <spock@gentoo.org>
Last updated: 2009-03-30
Last updated: 2017-10-10
Documentation of the uvesafb options is loosely based on vesafb.txt.

Просмотреть файл

@ -848,7 +848,7 @@ struct file_operations
----------------------
This describes how the VFS can manipulate an open file. As of kernel
4.1, the following members are defined:
4.18, the following members are defined:
struct file_operations {
struct module *owner;
@ -858,11 +858,11 @@ struct file_operations {
ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
int (*iterate) (struct file *, struct dir_context *);
int (*iterate_shared) (struct file *, struct dir_context *);
__poll_t (*poll) (struct file *, struct poll_table_struct *);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
int (*mremap)(struct file *, struct vm_area_struct *);
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *, fl_owner_t id);
int (*release) (struct inode *, struct file *);
@ -882,6 +882,10 @@ struct file_operations {
#ifndef CONFIG_MMU
unsigned (*mmap_capabilities)(struct file *);
#endif
ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
int (*clone_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
int (*dedupe_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
int (*fadvise)(struct file *, loff_t, loff_t, int);
};
Again, all methods are called without any locks being held, unless
@ -899,6 +903,9 @@ otherwise noted.
iterate: called when the VFS needs to read the directory contents
iterate_shared: called when the VFS needs to read the directory contents
when filesystem supports concurrent dir iterators
poll: called by the VFS when a process wants to check if there is
activity on this file and (optionally) go to sleep until there
is activity. Called by the select(2) and poll(2) system calls
@ -951,6 +958,16 @@ otherwise noted.
fallocate: called by the VFS to preallocate blocks or punch a hole.
copy_file_range: called by the copy_file_range(2) system call.
clone_file_range: called by the ioctl(2) system call for FICLONERANGE and
FICLONE commands.
dedupe_file_range: called by the ioctl(2) system call for FIDEDUPERANGE
command.
fadvise: possibly called by the fadvise64() system call.
Note that the file operations are implemented by the specific
filesystem in which the inode resides. When opening a device node
(character or block special) most filesystems will call special

Просмотреть файл

@ -32,7 +32,7 @@ Supported chips:
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
Author: Lothar Felten <l-felten@ti.com>
Author: Lothar Felten <lothar.felten@gmail.com>
Description
-----------

Просмотреть файл

@ -50,10 +50,14 @@ bounce buffer. But you don't need to care about that detail, just use the
returned buffer. If NULL is returned, the threshold was not met or a bounce
buffer could not be allocated. Fall back to PIO in that case.
In any case, a buffer obtained from above needs to be released. It ensures data
is copied back to the message and a potentially used bounce buffer is freed::
In any case, a buffer obtained from above needs to be released. Another helper
function ensures a potentially used bounce buffer is freed::
i2c_release_dma_safe_msg_buf(msg, dma_buf);
i2c_put_dma_safe_msg_buf(dma_buf, msg, xferred);
The last argument 'xferred' controls if the buffer is synced back to the
message or not. No syncing is needed in cases setting up DMA had an error and
there was no data transferred.
The bounce buffer handling from the core is generic and simple. It will always
allocate a new bounce buffer. If you want a more sophisticated handling (e.g.

Просмотреть файл

@ -33,4 +33,3 @@ Video Function Calls
video-clear-buffer
video-set-streamtype
video-set-format
video-set-attributes

Просмотреть файл

@ -425,7 +425,7 @@ tcp_mtu_probing - INTEGER
1 - Disabled by default, enabled when an ICMP black hole detected
2 - Always enabled, use initial MSS of tcp_base_mss.
tcp_probe_interval - INTEGER
tcp_probe_interval - UNSIGNED INTEGER
Controls how often to start TCP Packetization-Layer Path MTU
Discovery reprobe. The default is reprobing every 10 minutes as
per RFC4821.

Просмотреть файл

@ -86,7 +86,7 @@ pkg-config
The build system, as of 4.18, requires pkg-config to check for installed
kconfig tools and to determine flags settings for use in
'make {menu,n,g,x}config'. Previously pkg-config was being used but not
'make {g,x}config'. Previously pkg-config was being used but not
verified or documented.
Flex

Просмотреть файл

@ -0,0 +1,81 @@
Contributor Covenant Code of Conduct
++++++++++++++++++++++++++++++++++++
Our Pledge
==========
In the interest of fostering an open and welcoming environment, we as
contributors and maintainers pledge to making participation in our project and
our community a harassment-free experience for everyone, regardless of age, body
size, disability, ethnicity, sex characteristics, gender identity and
expression, level of experience, education, socio-economic status, nationality,
personal appearance, race, religion, or sexual identity and orientation.
Our Standards
=============
Examples of behavior that contributes to creating a positive environment
include:
* Using welcoming and inclusive language
* Being respectful of differing viewpoints and experiences
* Gracefully accepting constructive criticism
* Focusing on what is best for the community
* Showing empathy towards other community members
Examples of unacceptable behavior by participants include:
* The use of sexualized language or imagery and unwelcome sexual attention or
advances
* Trolling, insulting/derogatory comments, and personal or political attacks
* Public or private harassment
* Publishing others private information, such as a physical or electronic
address, without explicit permission
* Other conduct which could reasonably be considered inappropriate in a
professional setting
Our Responsibilities
====================
Maintainers are responsible for clarifying the standards of acceptable behavior
and are expected to take appropriate and fair corrective action in response to
any instances of unacceptable behavior.
Maintainers have the right and responsibility to remove, edit, or reject
comments, commits, code, wiki edits, issues, and other contributions that are
not aligned to this Code of Conduct, or to ban temporarily or permanently any
contributor for other behaviors that they deem inappropriate, threatening,
offensive, or harmful.
Scope
=====
This Code of Conduct applies both within project spaces and in public spaces
when an individual is representing the project or its community. Examples of
representing a project or community include using an official project e-mail
address, posting via an official social media account, or acting as an appointed
representative at an online or offline event. Representation of a project may be
further defined and clarified by project maintainers.
Enforcement
===========
Instances of abusive, harassing, or otherwise unacceptable behavior may be
reported by contacting the Technical Advisory Board (TAB) at
<tab@lists.linux-foundation.org>. All complaints will be reviewed and
investigated and will result in a response that is deemed necessary and
appropriate to the circumstances. The TAB is obligated to maintain
confidentiality with regard to the reporter of an incident. Further details of
specific enforcement policies may be posted separately.
Maintainers who do not follow or enforce the Code of Conduct in good faith may
face temporary or permanent repercussions as determined by other members of the
projects leadership.
Attribution
===========
This Code of Conduct is adapted from the Contributor Covenant, version 1.4,
available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html

Просмотреть файл

@ -1,28 +0,0 @@
Code of Conflict
----------------
The Linux kernel development effort is a very personal process compared
to "traditional" ways of developing software. Your code and ideas
behind it will be carefully reviewed, often resulting in critique and
criticism. The review will almost always require improvements to the
code before it can be included in the kernel. Know that this happens
because everyone involved wants to see the best possible solution for
the overall success of Linux. This development process has been proven
to create the most robust operating system kernel ever, and we do not
want to do anything to cause the quality of submission and eventual
result to ever decrease.
If however, anyone feels personally abused, threatened, or otherwise
uncomfortable due to this process, that is not acceptable. If so,
please contact the Linux Foundation's Technical Advisory Board at
<tab@lists.linux-foundation.org>, or the individual members, and they
will work to resolve the issue to the best of their ability. For more
information on who is on the Technical Advisory Board and what their
role is, please see:
- http://www.linuxfoundation.org/projects/linux/tab
As a reviewer of code, please strive to keep things civil and focused on
the technical issues involved. We are all humans, and frustrations can
be high on both sides of the process. Try to keep in mind the immortal
words of Bill and Ted, "Be excellent to each other."

Просмотреть файл

@ -20,7 +20,7 @@ Below are the essential guides that every developer should read.
:maxdepth: 1
howto
code-of-conflict
code-of-conduct
development-process
submitting-patches
coding-style

Просмотреть файл

@ -97,6 +97,11 @@ parameters may be changed at runtime by the command
allowing boot to proceed. none ignores them, expecting
user space to do the scan.
scsi_mod.use_blk_mq=
[SCSI] use blk-mq I/O path by default
See SCSI_MQ_DEFAULT in drivers/scsi/Kconfig.
Format: <y/n>
sim710= [SCSI,HW]
See header of drivers/scsi/sim710.c.

Просмотреть файл

@ -4510,7 +4510,8 @@ Do not enable KVM_FEATURE_PV_UNHALT if you disable HLT exits.
Architectures: s390
Parameters: none
Returns: 0 on success, -EINVAL if hpage module parameter was not set
or cmma is enabled
or cmma is enabled, or the VM has the KVM_VM_S390_UCONTROL
flag set
With this capability the KVM support for memory backing with 1m pages
through hugetlbfs can be enabled for a VM. After the capability is
@ -4521,6 +4522,15 @@ hpage module parameter is not set to 1, -EINVAL is returned.
While it is generally possible to create a huge page backed VM without
this capability, the VM will not be able to run.
7.14 KVM_CAP_MSR_PLATFORM_INFO
Architectures: x86
Parameters: args[0] whether feature should be enabled or not
With this capability, a guest may read the MSR_PLATFORM_INFO MSR. Otherwise,
a #GP would be raised when the guest tries to access. Currently, this
capability does not enable write permissions of this MSR for the guest.
8. Other capabilities.
----------------------

Просмотреть файл

@ -35,25 +35,25 @@ and two USB cables, connected like this:
( If your system does not list a debug port capability then you probably
won't be able to use the USB debug key. )
b.) You also need a Netchip USB debug cable/key:
b.) You also need a NetChip USB debug cable/key:
http://www.plxtech.com/products/NET2000/NET20DC/default.asp
This is a small blue plastic connector with two USB connections,
This is a small blue plastic connector with two USB connections;
it draws power from its USB connections.
c.) You need a second client/console system with a high speed USB 2.0
port.
d.) The Netchip device must be plugged directly into the physical
d.) The NetChip device must be plugged directly into the physical
debug port on the "host/target" system. You cannot use a USB hub in
between the physical debug port and the "host/target" system.
The EHCI debug controller is bound to a specific physical USB
port and the Netchip device will only work as an early printk
port and the NetChip device will only work as an early printk
device in this port. The EHCI host controllers are electrically
wired such that the EHCI debug controller is hooked up to the
first physical and there is no way to change this via software.
first physical port and there is no way to change this via software.
You can find the physical port through experimentation by trying
each physical port on the system and rebooting. Or you can try
and use lsusb or look at the kernel info messages emitted by the
@ -65,9 +65,9 @@ and two USB cables, connected like this:
to the hardware vendor, because there is no reason not to wire
this port into one of the physically accessible ports.
e.) It is also important to note, that many versions of the Netchip
e.) It is also important to note, that many versions of the NetChip
device require the "client/console" system to be plugged into the
right and side of the device (with the product logo facing up and
right hand side of the device (with the product logo facing up and
readable left to right). The reason being is that the 5 volt
power supply is taken from only one side of the device and it
must be the side that does not get rebooted.
@ -81,13 +81,18 @@ and two USB cables, connected like this:
CONFIG_EARLY_PRINTK_DBGP=y
And you need to add the boot command line: "earlyprintk=dbgp".
(If you are using Grub, append it to the 'kernel' line in
/etc/grub.conf)
/etc/grub.conf. If you are using Grub2 on a BIOS firmware system,
append it to the 'linux' line in /boot/grub2/grub.cfg. If you are
using Grub2 on an EFI firmware system, append it to the 'linux'
or 'linuxefi' line in /boot/grub2/grub.cfg or
/boot/efi/EFI/<distro>/grub.cfg.)
On systems with more than one EHCI debug controller you must
specify the correct EHCI debug controller number. The ordering
comes from the PCI bus enumeration of the EHCI controllers. The
default with no number argument is "0" the first EHCI debug
default with no number argument is "0" or the first EHCI debug
controller. To use the second EHCI debug controller, you would
use the command line: "earlyprintk=dbgp1"
@ -111,7 +116,7 @@ and two USB cables, connected like this:
see the raw output.
c.) On Nvidia Southbridge based systems: the kernel will try to probe
and find out which port has debug device connected.
and find out which port has a debug device connected.
3. Testing that it works fine:

Просмотреть файл

@ -324,7 +324,6 @@ F: Documentation/ABI/testing/sysfs-bus-acpi
F: Documentation/ABI/testing/configfs-acpi
F: drivers/pci/*acpi*
F: drivers/pci/*/*acpi*
F: drivers/pci/*/*/*acpi*
F: tools/power/acpi/
ACPI APEI
@ -1251,7 +1250,7 @@ N: meson
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
M: Antoine Tenart <antoine.tenart@bootlin.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-alpine/
@ -2311,6 +2310,7 @@ F: drivers/clocksource/cadence_ttc_timer.c
F: drivers/i2c/busses/i2c-cadence.c
F: drivers/mmc/host/sdhci-of-arasan.c
F: drivers/edac/synopsys_edac.c
F: drivers/i2c/busses/i2c-xiic.c
ARM64 PORT (AARCH64 ARCHITECTURE)
M: Catalin Marinas <catalin.marinas@arm.com>
@ -2955,7 +2955,6 @@ F: include/linux/bcm963xx_tag.h
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
M: Rasesh Mody <rasesh.mody@cavium.com>
M: Harish Patil <harish.patil@cavium.com>
M: Dept-GELinuxNICDev@cavium.com
L: netdev@vger.kernel.org
S: Supported
@ -2976,6 +2975,7 @@ F: drivers/scsi/bnx2i/
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
M: Ariel Elior <ariel.elior@cavium.com>
M: Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
M: everest-linux-l2@cavium.com
L: netdev@vger.kernel.org
S: Supported
@ -5469,7 +5469,8 @@ S: Odd Fixes
F: drivers/net/ethernet/agere/
ETHERNET BRIDGE
M: Stephen Hemminger <stephen@networkplumber.org>
M: Roopa Prabhu <roopa@cumulusnetworks.com>
M: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
L: bridge@lists.linux-foundation.org (moderated for non-subscribers)
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
@ -5624,6 +5625,8 @@ F: lib/fault-inject.c
FBTFT Framebuffer drivers
M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
L: dri-devel@lists.freedesktop.org
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/staging/fbtft/
@ -6059,7 +6062,7 @@ F: Documentation/gcc-plugins.txt
GASKET DRIVER FRAMEWORK
M: Rob Springer <rspringer@google.com>
M: John Joseph <jnjoseph@google.com>
M: Todd Poynor <toddpoynor@google.com>
M: Ben Chan <benchan@chromium.org>
S: Maintained
F: drivers/staging/gasket/
@ -7015,6 +7018,20 @@ F: drivers/crypto/vmx/aes*
F: drivers/crypto/vmx/ghash*
F: drivers/crypto/vmx/ppc-xlate.pl
IBM Power PCI Hotplug Driver for RPA-compliant PPC64 platform
M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
L: linux-pci@vger.kernel.org
L: linuxppc-dev@lists.ozlabs.org
S: Supported
F: drivers/pci/hotplug/rpaphp*
IBM Power IO DLPAR Driver for RPA-compliant PPC64 platform
M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
L: linux-pci@vger.kernel.org
L: linuxppc-dev@lists.ozlabs.org
S: Supported
F: drivers/pci/hotplug/rpadlpar*
IBM ServeRAID RAID DRIVER
S: Orphan
F: drivers/scsi/ips.*
@ -8255,9 +8272,9 @@ F: drivers/ata/pata_arasan_cf.c
LIBATA PATA DRIVERS
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
M: Jens Axboe <kernel.dk>
M: Jens Axboe <axboe@kernel.dk>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/pata_*.c
F: drivers/ata/ata_generic.c
@ -8275,7 +8292,7 @@ LIBATA SATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Jens Axboe <axboe@kernel.dk>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
@ -8291,7 +8308,7 @@ F: drivers/ata/sata_promise.*
LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
M: Jens Axboe <axboe@kernel.dk>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
S: Maintained
F: drivers/ata/
F: include/linux/ata.h
@ -8299,7 +8316,7 @@ F: include/linux/libata.h
F: Documentation/devicetree/bindings/ata/
LIBLOCKDEP
M: Sasha Levin <alexander.levin@verizon.com>
M: Sasha Levin <alexander.levin@microsoft.com>
S: Maintained
F: tools/lib/lockdep/
@ -8581,7 +8598,6 @@ F: include/linux/spinlock*.h
F: arch/*/include/asm/spinlock*.h
F: include/linux/rwlock*.h
F: include/linux/mutex*.h
F: arch/*/include/asm/mutex*.h
F: include/linux/rwsem*.h
F: arch/*/include/asm/rwsem.h
F: include/linux/seqlock.h
@ -9641,7 +9657,8 @@ MIPS/LOONGSON2 ARCHITECTURE
M: Jiaxun Yang <jiaxun.yang@flygoat.com>
L: linux-mips@linux-mips.org
S: Maintained
F: arch/mips/loongson64/*{2e/2f}*
F: arch/mips/loongson64/fuloong-2e/
F: arch/mips/loongson64/lemote-2f/
F: arch/mips/include/asm/mach-loongson64/
F: drivers/*/*loongson2*
F: drivers/*/*/*loongson2*
@ -9699,13 +9716,6 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/dvb-frontends/mn88473*
PCI DRIVER FOR MOBIVEIL PCIE IP
M: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
F: drivers/pci/controller/pcie-mobiveil.c
MODULE SUPPORT
M: Jessica Yu <jeyu@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
@ -9855,7 +9865,7 @@ M: Peter Rosin <peda@axentia.se>
S: Maintained
F: Documentation/ABI/testing/sysfs-class-mux*
F: Documentation/devicetree/bindings/mux/
F: include/linux/dt-bindings/mux/
F: include/dt-bindings/mux/
F: include/linux/mux/
F: drivers/mux/
@ -10932,7 +10942,7 @@ M: Willy Tarreau <willy@haproxy.com>
M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
S: Odd Fixes
F: Documentation/auxdisplay/lcd-panel-cgram.txt
F: drivers/misc/panel.c
F: drivers/auxdisplay/panel.c
PARALLEL PORT SUBSYSTEM
M: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
@ -11120,6 +11130,13 @@ F: include/uapi/linux/switchtec_ioctl.h
F: include/linux/switchtec.h
F: drivers/ntb/hw/mscc/
PCI DRIVER FOR MOBIVEIL PCIE IP
M: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
F: drivers/pci/controller/pcie-mobiveil.c
PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
M: Jason Cooper <jason@lakedaemon.net>
@ -11153,7 +11170,7 @@ F: drivers/pci/controller/dwc/pci-exynos.c
PCI DRIVER FOR SYNOPSYS DESIGNWARE
M: Jingoo Han <jingoohan1@gmail.com>
M: Joao Pinto <Joao.Pinto@synopsys.com>
M: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/designware-pcie.txt
@ -11186,8 +11203,14 @@ F: tools/pci/
PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
M: Russell Currey <ruscur@russell.cc>
M: Sam Bobroff <sbobroff@linux.ibm.com>
M: Oliver O'Halloran <oohall@gmail.com>
L: linuxppc-dev@lists.ozlabs.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
F: drivers/pci/pcie/aer.c
F: drivers/pci/pcie/dpc.c
F: drivers/pci/pcie/err.c
F: Documentation/powerpc/eeh-pci-error-recovery.txt
F: arch/powerpc/kernel/eeh*.c
F: arch/powerpc/platforms/*/eeh*.c
@ -11345,10 +11368,10 @@ S: Maintained
F: drivers/platform/x86/peaq-wmi.c
PER-CPU MEMORY ALLOCATOR
M: Dennis Zhou <dennis@kernel.org>
M: Tejun Heo <tj@kernel.org>
M: Christoph Lameter <cl@linux.com>
M: Dennis Zhou <dennisszhou@gmail.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu.git
S: Maintained
F: include/linux/percpu*.h
F: mm/percpu*.c
@ -11956,7 +11979,7 @@ F: Documentation/scsi/LICENSE.qla4xxx
F: drivers/scsi/qla4xxx/
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Harish Patil <harish.patil@cavium.com>
M: Shahed Shaikh <Shahed.Shaikh@cavium.com>
M: Manish Chopra <manish.chopra@cavium.com>
M: Dept-GELinuxNICDev@cavium.com
L: netdev@vger.kernel.org
@ -11964,7 +11987,6 @@ S: Supported
F: drivers/net/ethernet/qlogic/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
M: Harish Patil <harish.patil@cavium.com>
M: Manish Chopra <manish.chopra@cavium.com>
M: Dept-GELinuxNICDev@cavium.com
L: netdev@vger.kernel.org
@ -12243,6 +12265,7 @@ F: Documentation/networking/rds.txt
RDT - RESOURCE ALLOCATION
M: Fenghua Yu <fenghua.yu@intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: arch/x86/kernel/cpu/intel_rdt*
@ -14596,6 +14619,13 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/ti/netcp*
TI PCM3060 ASoC CODEC DRIVER
M: Kirill Marinushkin <kmarinushkin@birdec.tech>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/sound/pcm3060.txt
F: sound/soc/codecs/pcm3060*
TI TAS571X FAMILY ASoC CODEC DRIVER
M: Kevin Cernekee <cernekee@chromium.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@ -15371,7 +15401,7 @@ S: Maintained
UVESAFB DRIVER
M: Michal Januszewski <spock@gentoo.org>
L: linux-fbdev@vger.kernel.org
W: http://dev.gentoo.org/~spock/projects/uvesafb/
W: https://github.com/mjanusz/v86d
S: Maintained
F: Documentation/fb/uvesafb.txt
F: drivers/video/fbdev/uvesafb.*
@ -15895,6 +15925,7 @@ F: net/x25/
X86 ARCHITECTURE (32-BIT AND 64-BIT)
M: Thomas Gleixner <tglx@linutronix.de>
M: Ingo Molnar <mingo@redhat.com>
M: Borislav Petkov <bp@alien8.de>
R: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
L: linux-kernel@vger.kernel.org
@ -15923,6 +15954,15 @@ M: Borislav Petkov <bp@alien8.de>
S: Maintained
F: arch/x86/kernel/cpu/microcode/*
X86 MM
M: Dave Hansen <dave.hansen@linux.intel.com>
M: Andy Lutomirski <luto@kernel.org>
M: Peter Zijlstra <peterz@infradead.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm
S: Maintained
F: arch/x86/mm/
X86 PLATFORM DRIVERS
M: Darren Hart <dvhart@infradead.org>
M: Andy Shevchenko <andy@infradead.org>

Просмотреть файл

@ -2,7 +2,7 @@
VERSION = 4
PATCHLEVEL = 19
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc8
NAME = Merciless Moray
# *DOCUMENTATION*
@ -299,19 +299,7 @@ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below. If a native build is happening,
# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \
-e s/riscv.*/riscv/)
include scripts/subarch.include
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
@ -495,13 +483,15 @@ endif
ifeq ($(cc-name),clang)
ifneq ($(CROSS_COMPILE),)
CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
GCC_TOOLCHAIN := $(realpath $(dir $(shell which $(LD)))/..)
GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
endif
ifneq ($(GCC_TOOLCHAIN),)
CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
endif
KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
endif
@ -616,6 +606,11 @@ CFLAGS_GCOV := -fprofile-arcs -ftest-coverage \
$(call cc-disable-warning,maybe-uninitialized,)
export CFLAGS_GCOV
# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
ifdef CONFIG_FUNCTION_TRACER
CC_FLAGS_FTRACE := -pg
endif
# The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
# values of the respective KBUILD_* variables
ARCH_CPPFLAGS :=
@ -755,9 +750,6 @@ KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \
endif
ifdef CONFIG_FUNCTION_TRACER
ifndef CC_FLAGS_FTRACE
CC_FLAGS_FTRACE := -pg
endif
ifdef CONFIG_FTRACE_MCOUNT_RECORD
# gcc 5 supports generating the mcount tables directly
ifeq ($(call cc-option-yn,-mrecord-mcount),y)
@ -807,6 +799,9 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
# disable pointer signed / unsigned warnings in gcc 4.0
KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
# disable stringop warnings in gcc 8+
KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)

Просмотреть файл

@ -9,6 +9,7 @@
config ARC
def_bool y
select ARC_TIMERS
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_HAS_SG_CHAIN
@ -28,8 +29,12 @@ config ARC
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IOREMAP_PROT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_MEMBLOCK
@ -44,11 +49,6 @@ config ARC
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA
select ARCH_HAS_PTE_SPECIAL
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
@ -149,7 +149,7 @@ config ARC_CPU_770
Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
This core has a bunch of cool new features:
-MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
Shared Address Spaces (for sharing TLB entires in MMU)
Shared Address Spaces (for sharing TLB entries in MMU)
-Caches: New Prog Model, Region Flush
-Insns: endian swap, load-locked/store-conditional, time-stamp-ctr

Просмотреть файл

@ -6,33 +6,11 @@
# published by the Free Software Foundation.
#
ifeq ($(CROSS_COMPILE),)
ifndef CONFIG_CPU_BIG_ENDIAN
CROSS_COMPILE := arc-linux-
else
CROSS_COMPILE := arceb-linux-
endif
endif
KBUILD_DEFCONFIG := nsim_700_defconfig
cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7
cflags-$(CONFIG_ISA_ARCV2) += -mcpu=archs
is_700 = $(shell $(CC) -dM -E - < /dev/null | grep -q "ARC700" && echo 1 || echo 0)
ifdef CONFIG_ISA_ARCOMPACT
ifeq ($(is_700), 0)
$(error Toolchain not configured for ARCompact builds)
endif
endif
ifdef CONFIG_ISA_ARCV2
ifeq ($(is_700), 1)
$(error Toolchain not configured for ARCv2 builds)
endif
endif
cflags-$(CONFIG_ISA_ARCV2) += -mcpu=hs38
ifdef CONFIG_ARC_CURR_IN_REG
# For a global register defintion, make sure it gets passed to every file
@ -43,10 +21,7 @@ ifdef CONFIG_ARC_CURR_IN_REG
LINUXINCLUDE += -include ${src}/arch/arc/include/asm/current.h
endif
upto_gcc44 := $(call cc-ifversion, -le, 0404, y)
atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y)
cflags-$(atleast_gcc44) += -fsection-anchors
cflags-y += -fsection-anchors
cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
@ -82,12 +57,7 @@ cflags-$(disable_small_data) += -mno-sdata -fcall-used-gp
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mbig-endian
ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
# STAR 9000518362: (fixed with binutils shipping with gcc 4.8)
# arc-linux-uclibc-ld (buildroot) or arceb-elf32-ld (EZChip) don't accept
# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
ldflags-$(upto_gcc44) += -marclinux
LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
LIBGCC = $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
# Modules with short calls might break for calls into builtin-kernel
KBUILD_CFLAGS_MODULE += -mlong-calls -mno-millicode

Просмотреть файл

@ -93,6 +93,32 @@
};
};
/*
* Mark DMA peripherals connected via IOC port as dma-coherent. We do
* it via overlay because peripherals defined in axs10x_mb.dtsi are
* used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
* only AXS103 board has HW-coherent DMA peripherals)
* We don't need to mark pgu@17000 as dma-coherent because it uses
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
ethernet@0x18000 {
dma-coherent;
};
ehci@0x40000 {
dma-coherent;
};
ohci@0x60000 {
dma-coherent;
};
mmc@0x15000 {
dma-coherent;
};
};
/*
* The DW APB ICTL intc on MB is connected to CPU intc via a
* DT "invisible" DW APB GPIO block, configured to simply pass thru

Просмотреть файл

@ -100,6 +100,32 @@
};
};
/*
* Mark DMA peripherals connected via IOC port as dma-coherent. We do
* it via overlay because peripherals defined in axs10x_mb.dtsi are
* used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
* only AXS103 board has HW-coherent DMA peripherals)
* We don't need to mark pgu@17000 as dma-coherent because it uses
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
ethernet@0x18000 {
dma-coherent;
};
ehci@0x40000 {
dma-coherent;
};
ohci@0x60000 {
dma-coherent;
};
mmc@0x15000 {
dma-coherent;
};
};
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.

Просмотреть файл

@ -9,6 +9,10 @@
*/
/ {
aliases {
ethernet = &gmac;
};
axs10x_mb {
compatible = "simple-bus";
#address-cells = <1>;
@ -68,7 +72,7 @@
};
};
ethernet@0x18000 {
gmac: ethernet@0x18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@ -81,6 +85,7 @@
max-speed = <100>;
resets = <&creg_rst 5>;
reset-names = "stmmaceth";
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
};
ehci@0x40000 {

Просмотреть файл

@ -25,6 +25,10 @@
bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
};
aliases {
ethernet = &gmac;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
@ -163,7 +167,7 @@
#clock-cells = <0>;
};
ethernet@8000 {
gmac: ethernet@8000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = <0x8000 0x2000>;
@ -176,6 +180,8 @@
phy-handle = <&phy0>;
resets = <&cgu_rst HSDK_ETH_RESET>;
reset-names = "stmmaceth";
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
dma-coherent;
mdio {
#address-cells = <1>;
@ -194,12 +200,14 @@
compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
reg = <0x60000 0x100>;
interrupts = <15>;
dma-coherent;
};
ehci@40000 {
compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
reg = <0x40000 0x100>;
interrupts = <15>;
dma-coherent;
};
mmc@a000 {
@ -212,6 +220,7 @@
clock-names = "biu", "ciu";
interrupts = <12>;
bus-width = <4>;
dma-coherent;
};
};

Просмотреть файл

@ -1,5 +1,3 @@
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
@ -63,7 +61,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y

Просмотреть файл

@ -1,5 +1,3 @@
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
@ -64,7 +62,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y

Просмотреть файл

@ -1,5 +1,3 @@
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
@ -65,7 +63,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y

Просмотреть файл

@ -1,4 +1,3 @@
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -57,7 +56,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1

Просмотреть файл

@ -1,4 +1,3 @@
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -60,7 +59,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1

Просмотреть файл

@ -1,4 +1,3 @@
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ_IDLE=y

Просмотреть файл

@ -59,7 +59,6 @@ CONFIG_NETCONSOLE=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1

Просмотреть файл

@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -44,7 +43,6 @@ CONFIG_LXT_PHY=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set

Просмотреть файл

@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -45,7 +44,6 @@ CONFIG_DEVTMPFS=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set

Просмотреть файл

@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
@ -44,7 +43,6 @@ CONFIG_DEVTMPFS=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set

Просмотреть файл

@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
@ -48,7 +47,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1

Просмотреть файл

@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
@ -47,7 +46,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1

Просмотреть файл

@ -1,4 +1,3 @@
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
@ -58,7 +57,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1

Просмотреть файл

@ -57,7 +57,6 @@ CONFIG_STMMAC_ETH=y
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1

Просмотреть файл

@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@ -53,7 +52,6 @@ CONFIG_NATIONAL_PHY=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y

Просмотреть файл

@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y

Просмотреть файл

@ -84,7 +84,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v) \
"1: llock %[orig], [%[ctr]] \n" \
" " #asm_op " %[val], %[orig], %[i] \n" \
" scond %[val], [%[ctr]] \n" \
" \n" \
" bnz 1b \n" \
: [val] "=&r" (val), \
[orig] "=&r" (orig) \
: [ctr] "r" (&v->counter), \

Просмотреть файл

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
// (C) 2018 Synopsys, Inc. (www.synopsys.com)
#ifndef ASM_ARC_DMA_MAPPING_H
#define ASM_ARC_DMA_MAPPING_H
#include <asm-generic/dma-mapping.h>
void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
const struct iommu_ops *iommu, bool coherent);
#define arch_setup_dma_ops arch_setup_dma_ops
#endif

Просмотреть файл

@ -241,6 +241,26 @@ int copy_thread(unsigned long clone_flags,
task_thread_info(current)->thr_ptr;
}
/*
* setup usermode thread pointer #1:
* when child is picked by scheduler, __switch_to() uses @c_callee to
* populate usermode callee regs: this works (despite being in a kernel
* function) since special return path for child @ret_from_fork()
* ensures those regs are not clobbered all the way to RTIE to usermode
*/
c_callee->r25 = task_thread_info(p)->thr_ptr;
#ifdef CONFIG_ARC_CURR_IN_REG
/*
* setup usermode thread pointer #2:
* however for this special use of r25 in kernel, __switch_to() sets
* r25 for kernel needs and only in the final return path is usermode
* r25 setup, from pt_regs->user_r25. So set that up as well
*/
c_regs->user_r25 = c_callee->r25;
#endif
return 0;
}

Просмотреть файл

@ -83,9 +83,6 @@ done:
static void show_faulting_vma(unsigned long address, char *buf)
{
struct vm_area_struct *vma;
struct inode *inode;
unsigned long ino = 0;
dev_t dev = 0;
char *nm = buf;
struct mm_struct *active_mm = current->active_mm;
@ -99,12 +96,10 @@ static void show_faulting_vma(unsigned long address, char *buf)
* if the container VMA is not found
*/
if (vma && (vma->vm_start <= address)) {
struct file *file = vma->vm_file;
if (file) {
nm = file_path(file, buf, PAGE_SIZE - 1);
inode = file_inode(vma->vm_file);
dev = inode->i_sb->s_dev;
ino = inode->i_ino;
if (vma->vm_file) {
nm = file_path(vma->vm_file, buf, PAGE_SIZE - 1);
if (IS_ERR(nm))
nm = "?";
}
pr_info(" @off 0x%lx in [%s]\n"
" VMA: 0x%08lx to 0x%08lx\n",

Просмотреть файл

@ -65,7 +65,7 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
perip_base,
IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency "));
IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
return buf;
}
@ -896,15 +896,6 @@ static void __dma_cache_wback_slc(phys_addr_t start, unsigned long sz)
slc_op(start, sz, OP_FLUSH);
}
/*
* DMA ops for systems with IOC
* IOC hardware snoops all DMA traffic keeping the caches consistent with
* memory - eliding need for any explicit cache maintenance of DMA buffers
*/
static void __dma_cache_wback_inv_ioc(phys_addr_t start, unsigned long sz) {}
static void __dma_cache_inv_ioc(phys_addr_t start, unsigned long sz) {}
static void __dma_cache_wback_ioc(phys_addr_t start, unsigned long sz) {}
/*
* Exported DMA API
*/
@ -1153,6 +1144,19 @@ noinline void __init arc_ioc_setup(void)
{
unsigned int ioc_base, mem_sz;
/*
* As for today we don't support both IOC and ZONE_HIGHMEM enabled
* simultaneously. This happens because as of today IOC aperture covers
* only ZONE_NORMAL (low mem) and any dma transactions outside this
* region won't be HW coherent.
* If we want to use both IOC and ZONE_HIGHMEM we can use
* bounce_buffer to handle dma transactions to HIGHMEM.
* Also it is possible to modify dma_direct cache ops or increase IOC
* aperture size if we are planning to use HIGHMEM without PAE.
*/
if (IS_ENABLED(CONFIG_HIGHMEM))
panic("IOC and HIGHMEM can't be used simultaneously");
/* Flush + invalidate + disable L1 dcache */
__dc_disable();
@ -1264,11 +1268,7 @@ void __init arc_cache_init_master(void)
if (is_isa_arcv2() && ioc_enable)
arc_ioc_setup();
if (is_isa_arcv2() && ioc_enable) {
__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
__dma_cache_inv = __dma_cache_inv_ioc;
__dma_cache_wback = __dma_cache_wback_ioc;
} else if (is_isa_arcv2() && l2_line_sz && slc_enable) {
if (is_isa_arcv2() && l2_line_sz && slc_enable) {
__dma_cache_wback_inv = __dma_cache_wback_inv_slc;
__dma_cache_inv = __dma_cache_inv_slc;
__dma_cache_wback = __dma_cache_wback_slc;
@ -1277,6 +1277,12 @@ void __init arc_cache_init_master(void)
__dma_cache_inv = __dma_cache_inv_l1;
__dma_cache_wback = __dma_cache_wback_l1;
}
/*
* In case of IOC (say IOC+SLC case), pointers above could still be set
* but end up not being relevant as the first function in chain is not
* called at all for @dma_direct_ops
* arch_sync_dma_for_cpu() -> dma_cache_*() -> __dma_cache_*()
*/
}
void __ref arc_cache_init(void)

Просмотреть файл

@ -6,20 +6,17 @@
* published by the Free Software Foundation.
*/
/*
* DMA Coherent API Notes
*
* I/O is inherently non-coherent on ARC. So a coherent DMA buffer is
* implemented by accessing it using a kernel virtual address, with
* Cache bit off in the TLB entry.
*
* The default DMA address == Phy address which is 0x8000_0000 based.
*/
#include <linux/dma-noncoherent.h>
#include <asm/cache.h>
#include <asm/cacheflush.h>
/*
* ARCH specific callbacks for generic noncoherent DMA ops (dma/noncoherent.c)
* - hardware IOC not available (or "dma-coherent" not set for device in DT)
* - But still handle both coherent and non-coherent requests from caller
*
* For DMA coherent hardware (IOC) generic code suffices
*/
void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
gfp_t gfp, unsigned long attrs)
{
@ -27,42 +24,29 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
struct page *page;
phys_addr_t paddr;
void *kvaddr;
int need_coh = 1, need_kvaddr = 0;
bool need_coh = !(attrs & DMA_ATTR_NON_CONSISTENT);
/*
* __GFP_HIGHMEM flag is cleared by upper layer functions
* (in include/linux/dma-mapping.h) so we should never get a
* __GFP_HIGHMEM here.
*/
BUG_ON(gfp & __GFP_HIGHMEM);
page = alloc_pages(gfp, order);
if (!page)
return NULL;
/*
* IOC relies on all data (even coherent DMA data) being in cache
* Thus allocate normal cached memory
*
* The gains with IOC are two pronged:
* -For streaming data, elides need for cache maintenance, saving
* cycles in flush code, and bus bandwidth as all the lines of a
* buffer need to be flushed out to memory
* -For coherent data, Read/Write to buffers terminate early in cache
* (vs. always going to memory - thus are faster)
*/
if ((is_isa_arcv2() && ioc_enable) ||
(attrs & DMA_ATTR_NON_CONSISTENT))
need_coh = 0;
/*
* - A coherent buffer needs MMU mapping to enforce non-cachability
* - A highmem page needs a virtual handle (hence MMU mapping)
* independent of cachability
*/
if (PageHighMem(page) || need_coh)
need_kvaddr = 1;
/* This is linear addr (0x8000_0000 based) */
paddr = page_to_phys(page);
*dma_handle = paddr;
/* This is kernel Virtual address (0x7000_0000 based) */
if (need_kvaddr) {
/*
* A coherent buffer needs MMU mapping to enforce non-cachability.
* kvaddr is kernel Virtual address (0x7000_0000 based).
*/
if (need_coh) {
kvaddr = ioremap_nocache(paddr, size);
if (kvaddr == NULL) {
__free_pages(page, order);
@ -93,12 +77,8 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr,
{
phys_addr_t paddr = dma_handle;
struct page *page = virt_to_page(paddr);
int is_non_coh = 1;
is_non_coh = (attrs & DMA_ATTR_NON_CONSISTENT) ||
(is_isa_arcv2() && ioc_enable);
if (PageHighMem(page) || !is_non_coh)
if (!(attrs & DMA_ATTR_NON_CONSISTENT))
iounmap((void __force __iomem *)vaddr);
__free_pages(page, get_order(size));
@ -185,3 +165,23 @@ void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
break;
}
}
/*
* Plug in coherent or noncoherent dma ops
*/
void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
const struct iommu_ops *iommu, bool coherent)
{
/*
* IOC hardware snoops all DMA traffic keeping the caches consistent
* with memory - eliding need for any explicit cache maintenance of
* DMA buffers - so we can use dma_direct cache ops.
*/
if (is_isa_arcv2() && ioc_enable && coherent) {
set_dma_ops(dev, &dma_direct_ops);
dev_info(dev, "use dma_direct_ops cache ops\n");
} else {
set_dma_ops(dev, &dma_noncoherent_ops);
dev_info(dev, "use dma_noncoherent_ops cache ops\n");
}
}

0
arch/arm/boot/dts/am335x-osd3358-sm-red.dts Executable file → Normal file
Просмотреть файл

Просмотреть файл

@ -469,6 +469,7 @@
ti,hwmods = "rtc";
clocks = <&clk_32768_ck>;
clock-names = "int-clk";
system-power-controller;
status = "disabled";
};

Просмотреть файл

@ -11,6 +11,7 @@
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/at91.h>
/ {
model = "Atmel SAMA5D2 PTC EK";
@ -299,6 +300,7 @@
<PIN_PA30__NWE_NANDWE>,
<PIN_PB2__NRD_NANDOE>;
bias-pull-up;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
};
ale_cle_rdy_cs {

Просмотреть файл

@ -106,21 +106,23 @@
global_timer: timer@1e200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x1e200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&axi_clk>;
};
local_timer: local-timer@1e600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1e600 0x20>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_EDGE_RISING)>;
clocks = <&axi_clk>;
};
twd_watchdog: watchdog@1e620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x1e620 0x20>;
interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
};
armpll: armpll {
@ -158,7 +160,7 @@
serial0: serial@600 {
compatible = "brcm,bcm6345-uart";
reg = <0x600 0x1b>;
interrupts = <GIC_SPI 32 0>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
clock-names = "periph";
status = "disabled";
@ -167,7 +169,7 @@
serial1: serial@620 {
compatible = "brcm,bcm6345-uart";
reg = <0x620 0x1b>;
interrupts = <GIC_SPI 33 0>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
clock-names = "periph";
status = "disabled";
@ -180,7 +182,7 @@
reg = <0x2000 0x600>, <0xf0 0x10>;
reg-names = "nand", "nand-int-base";
status = "disabled";
interrupts = <GIC_SPI 38 0>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "nand";
};

Просмотреть файл

@ -13,6 +13,43 @@
reg = <0x40000000 0x08000000>;
};
reg_vddio_sd0: regulator-vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 18 0>;
enable-active-high;
};
reg_lcd_5v: regulator-lcd-5v {
compatible = "regulator-fixed";
regulator-name = "lcd-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
panel {
compatible = "sii,43wvf1g";
backlight = <&backlight_display>;
dvdd-supply = <&reg_lcd_3v3>;
avdd-supply = <&reg_lcd_5v>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@ -52,31 +89,11 @@
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
lcd-supply = <&reg_lcd_3v3>;
display = <&display0>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <9200000>;
hactive = <480>;
vactive = <272>;
hback-porch = <15>;
hfront-porch = <8>;
vback-porch = <12>;
vfront-porch = <4>;
hsync-len = <1>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
@ -118,32 +135,7 @@
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
reg_lcd_3v3: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 18 0>;
enable-active-high;
};
};
backlight {
backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;

Просмотреть файл

@ -13,6 +13,87 @@
reg = <0x40000000 0x08000000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: regulator-vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_fec_3v3: regulator-fec-3v3 {
compatible = "regulator-fixed";
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
reg_usb0_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
enable-active-high;
};
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 8 0>;
enable-active-high;
};
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 0>;
enable-active-high;
};
reg_can_3v3: regulator-can-3v3 {
compatible = "regulator-fixed";
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 13 0>;
enable-active-high;
};
reg_lcd_5v: regulator-lcd-5v {
compatible = "regulator-fixed";
regulator-name = "lcd-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
panel {
compatible = "sii,43wvf1g";
backlight = <&backlight_display>;
dvdd-supply = <&reg_lcd_3v3>;
avdd-supply = <&reg_lcd_5v>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
@ -116,31 +197,11 @@
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
lcd-supply = <&reg_lcd_3v3>;
display = <&display0>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <33500000>;
hactive = <800>;
vactive = <480>;
hback-porch = <89>;
hfront-porch = <164>;
vback-porch = <23>;
vfront-porch = <10>;
hsync-len = <10>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
@ -269,80 +330,6 @@
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_fec_3v3: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
reg_usb0_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
enable-active-high;
};
reg_usb1_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 8 0>;
enable-active-high;
};
reg_lcd_3v3: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 0>;
enable-active-high;
};
reg_can_3v3: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 13 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx28-evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
@ -363,7 +350,7 @@
};
};
backlight {
backlight_display: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;

Просмотреть файл

@ -123,6 +123,17 @@
};
};
&cpu0 {
/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
operating-points = <
/* kHz uV */
166666 850000
400000 900000
800000 1050000
1000000 1200000
>;
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;

Просмотреть файл

@ -126,10 +126,14 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
/*
* Reference manual lists pci irqs incorrectly
* Real hardware ordering is same as imx6: D+MSI, C, B, A
*/
interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;

Просмотреть файл

@ -354,7 +354,7 @@
&mmc2 {
vmmc-supply = <&vsdio>;
bus-width = <8>;
non-removable;
ti,non-removable;
};
&mmc3 {
@ -621,15 +621,6 @@
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
};
&omap4_pmx_wkup {
usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
/* gpio_wk0 */
pinctrl-single,pins = <
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
@ -644,6 +635,15 @@
};
};
&omap4_pmx_wkup {
usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
/* gpio_wk0 */
pinctrl-single,pins = <
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
};
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.

Просмотреть файл

@ -41,7 +41,7 @@
};
macb1: ethernet@f802c000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";

Просмотреть файл

@ -1078,8 +1078,8 @@
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc SPI6_K>;
resets = <&rcc SPI6_R>;
dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>,
<&mdma1 35 0x0 0x40002 0x0 0x0 0>;
dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
<&mdma1 35 0x0 0x40002 0x0 0x0>;
dma-names = "rx", "tx";
status = "disabled";
};

Просмотреть файл

@ -800,8 +800,7 @@
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-r40-hdmi-phy",
"allwinner,sun50i-a64-hdmi-phy";
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
<&ccu 7>, <&ccu 16>;

Просмотреть файл

@ -257,6 +257,7 @@ CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_IMX=y

Просмотреть файл

@ -95,6 +95,7 @@ CONFIG_MFD_MXS_LRADC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y

Просмотреть файл

@ -5,19 +5,19 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_VERSATILE=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -59,6 +59,7 @@ CONFIG_GPIO_PL061=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
@ -89,9 +90,10 @@ CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
CONFIG_FONTS=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_FONTS=y
CONFIG_FONT_ACORN_8x8=y

Просмотреть файл

@ -223,7 +223,6 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events);
#define KVM_ARCH_WANT_MMU_NOTIFIER
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
int kvm_unmap_hva_range(struct kvm *kvm,
unsigned long start, unsigned long end);
void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);

Просмотреть файл

@ -49,6 +49,8 @@
#define ARM_DISCARD \
*(.ARM.exidx.exit.text) \
*(.ARM.extab.exit.text) \
*(.ARM.exidx.text.exit) \
*(.ARM.extab.text.exit) \
ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) \
ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) \
ARM_EXIT_DISCARD(EXIT_TEXT) \

Просмотреть файл

@ -478,15 +478,15 @@ static const struct coproc_reg cp15_regs[] = {
/* ICC_SGI1R */
{ CRm64(12), Op1( 0), is64, access_gic_sgi},
/* ICC_ASGI1R */
{ CRm64(12), Op1( 1), is64, access_gic_sgi},
/* ICC_SGI0R */
{ CRm64(12), Op1( 2), is64, access_gic_sgi},
/* VBAR: swapped by interrupt.S. */
{ CRn(12), CRm( 0), Op1( 0), Op2( 0), is32,
NULL, reset_val, c12_VBAR, 0x00000000 },
/* ICC_ASGI1R */
{ CRm64(12), Op1( 1), is64, access_gic_sgi},
/* ICC_SGI0R */
{ CRm64(12), Op1( 2), is64, access_gic_sgi},
/* ICC_SRE */
{ CRn(12), CRm(12), Op1( 0), Op2(5), is32, access_gic_sre },

Просмотреть файл

@ -2160,6 +2160,37 @@ static int of_dev_hwmod_lookup(struct device_node *np,
return -ENODEV;
}
/**
* omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets
*
* @oh: struct omap_hwmod *
* @np: struct device_node *
*
* Fix up module register offsets for modules with mpu_rt_idx.
* Only needed for cpsw with interconnect target module defined
* in device tree while still using legacy hwmod platform data
* for rev, sysc and syss registers.
*
* Can be removed when all cpsw hwmod platform data has been
* dropped.
*/
static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh,
struct device_node *np,
struct resource *res)
{
struct device_node *child = NULL;
int error;
child = of_get_next_child(np, child);
if (!child)
return;
error = of_address_to_resource(child, oh->mpu_rt_idx, res);
if (error)
pr_err("%s: error mapping mpu_rt_idx: %i\n",
__func__, error);
}
/**
* omap_hwmod_parse_module_range - map module IO range from device tree
* @oh: struct omap_hwmod *
@ -2220,7 +2251,13 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
size = be32_to_cpup(ranges);
pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
oh->name, np->name, base, size);
oh ? oh->name : "", np->name, base, size);
if (oh && oh->mpu_rt_idx) {
omap_hwmod_fix_mpu_rt_idx(oh, np, res);
return 0;
}
res->start = base;
res->end = base + size - 1;

Просмотреть файл

@ -473,7 +473,7 @@ void pci_ioremap_set_mem_type(int mem_type)
int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
{
BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
BUG_ON(offset + SZ_64K - 1 > IO_SPACE_LIMIT);
return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
PCI_IO_VIRT_BASE + offset + SZ_64K,

Просмотреть файл

@ -413,3 +413,4 @@
396 common pkey_free sys_pkey_free
397 common statx sys_statx
398 common rseq sys_rseq
399 common io_pgetevents sys_io_pgetevents

Просмотреть файл

@ -763,7 +763,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
config HOLES_IN_ZONE
def_bool y
depends on NUMA
source kernel/Kconfig.hz

Просмотреть файл

@ -46,6 +46,7 @@
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
@ -56,6 +57,7 @@
vqmmc-supply = <&reg_bldo2>;
non-removable;
cap-mmc-hw-reset;
bus-width = <8>;
status = "okay";
};

Просмотреть файл

@ -38,6 +38,7 @@ CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_K3=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_LG1K=y
CONFIG_ARCH_HISI=y
@ -605,6 +606,8 @@ CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_ARCH_K3_AM6_SOC=y
CONFIG_SOC_TI=y
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y

Просмотреть файл

@ -417,7 +417,7 @@ static int gcm_encrypt(struct aead_request *req)
__aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds);
put_unaligned_be32(2, iv + GCM_IV_SIZE);
while (walk.nbytes >= AES_BLOCK_SIZE) {
while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) {
int blocks = walk.nbytes / AES_BLOCK_SIZE;
u8 *dst = walk.dst.virt.addr;
u8 *src = walk.src.virt.addr;
@ -437,11 +437,18 @@ static int gcm_encrypt(struct aead_request *req)
NULL);
err = skcipher_walk_done(&walk,
walk.nbytes % AES_BLOCK_SIZE);
walk.nbytes % (2 * AES_BLOCK_SIZE));
}
if (walk.nbytes)
if (walk.nbytes) {
__aes_arm64_encrypt(ctx->aes_key.key_enc, ks, iv,
nrounds);
if (walk.nbytes > AES_BLOCK_SIZE) {
crypto_inc(iv, AES_BLOCK_SIZE);
__aes_arm64_encrypt(ctx->aes_key.key_enc,
ks + AES_BLOCK_SIZE, iv,
nrounds);
}
}
}
/* handle the tail */
@ -545,7 +552,7 @@ static int gcm_decrypt(struct aead_request *req)
__aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds);
put_unaligned_be32(2, iv + GCM_IV_SIZE);
while (walk.nbytes >= AES_BLOCK_SIZE) {
while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) {
int blocks = walk.nbytes / AES_BLOCK_SIZE;
u8 *dst = walk.dst.virt.addr;
u8 *src = walk.src.virt.addr;
@ -564,11 +571,21 @@ static int gcm_decrypt(struct aead_request *req)
} while (--blocks > 0);
err = skcipher_walk_done(&walk,
walk.nbytes % AES_BLOCK_SIZE);
walk.nbytes % (2 * AES_BLOCK_SIZE));
}
if (walk.nbytes)
if (walk.nbytes) {
if (walk.nbytes > AES_BLOCK_SIZE) {
u8 *iv2 = iv + AES_BLOCK_SIZE;
memcpy(iv2, iv, AES_BLOCK_SIZE);
crypto_inc(iv2, AES_BLOCK_SIZE);
__aes_arm64_encrypt(ctx->aes_key.key_enc, iv2,
iv2, nrounds);
}
__aes_arm64_encrypt(ctx->aes_key.key_enc, iv, iv,
nrounds);
}
}
/* handle the tail */

Просмотреть файл

@ -69,5 +69,5 @@ static void __exit sm4_ce_mod_fini(void)
crypto_unregister_alg(&sm4_ce_alg);
}
module_cpu_feature_match(SM3, sm4_ce_mod_init);
module_cpu_feature_match(SM4, sm4_ce_mod_init);
module_exit(sm4_ce_mod_fini);

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше