microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'depends/cleanup' into next/virt

This commit is contained in:
Olof Johansson 2013-02-11 09:21:44 -08:00
Родитель 3ad06d1a7d f8060f5446
Коммит 5f48a29f17
547 изменённых файлов: 1018 добавлений и 1734 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

3
arch/arm/include/asm/mach/arch.h
Просмотреть файл

@ -12,7 +12,6 @@
struct tag;
struct meminfo;
struct sys_timer;
struct pt_regs;
struct smp_operations;
#ifdef CONFIG_SMP
@ -48,7 +47,7 @@ struct machine_desc {
void (*map_io)(void);/* IO mapping function */
void (*init_early)(void);
void (*init_irq)(void);
struct sys_timer *timer; /* system tick timer */
void (*init_time)(void);
void (*init_machine)(void);
void (*init_late)(void);
#ifdef CONFIG_MULTI_IRQ_HANDLER

30
arch/arm/include/asm/mach/time.h
Просмотреть файл

@ -10,36 +10,6 @@
#ifndef __ASM_ARM_MACH_TIME_H
#define __ASM_ARM_MACH_TIME_H
/*
* This is our kernel timer structure.
*
* - init
* Initialise the kernels jiffy timer source, claim interrupt
* using setup_irq. This is called early on during initialisation
* while interrupts are still disabled on the local CPU.
* - suspend
* Suspend the kernel jiffy timer source, if necessary. This
* is called with interrupts disabled, after all normal devices
* have been suspended. If no action is required, set this to
* NULL.
* - resume
* Resume the kernel jiffy timer source, if necessary. This
* is called with interrupts disabled before any normal devices
* are resumed. If no action is required, set this to NULL.
* - offset
* Return the timer offset in microseconds since the last timer
* interrupt. Note: this must take account of any unprocessed
* timer interrupt which may be pending.
*/
struct sys_timer {
void (*init)(void);
void (*suspend)(void);
void (*resume)(void);
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
unsigned long (*offset)(void);
#endif
};
extern void timer_tick(void);
struct timespec;

53
arch/arm/kernel/time.c
Просмотреть файл

@ -21,7 +21,6 @@
#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/profile.h>
#include <linux/syscore_ops.h>
#include <linux/timer.h>
#include <linux/irq.h>
@ -31,11 +30,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
/*
* Our system timer.
*/
static struct sys_timer *system_timer;
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
/* this needs a better home */
@ -69,16 +63,6 @@ unsigned long profile_pc(struct pt_regs *regs)
EXPORT_SYMBOL(profile_pc);
#endif
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
u32 arch_gettimeoffset(void)
{
if (system_timer->offset != NULL)
return system_timer->offset() * 1000;
return 0;
}
#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@ -129,43 +113,8 @@ int __init register_persistent_clock(clock_access_fn read_boot,
return -EINVAL;
}
#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
static int timer_suspend(void)
{
if (system_timer->suspend)
system_timer->suspend();
return 0;
}
static void timer_resume(void)
{
if (system_timer->resume)
system_timer->resume();
}
#else
#define timer_suspend NULL
#define timer_resume NULL
#endif
static struct syscore_ops timer_syscore_ops = {
.suspend = timer_suspend,
.resume = timer_resume,
};
static int __init timer_init_syscore_ops(void)
{
register_syscore_ops(&timer_syscore_ops);
return 0;
}
device_initcall(timer_init_syscore_ops);
void __init time_init(void)
{
system_timer = machine_desc->timer;
system_timer->init();
machine_desc->init_time();
sched_clock_postinit();
}

12
arch/arm/mach-at91/at91rm9200_time.c
Просмотреть файл

@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@ -265,17 +264,10 @@ void __init at91rm9200_timer_init(void)
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&clkevt);
clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
2, AT91_ST_ALMV);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
}
struct sys_timer at91rm9200_timer = {
.init = at91rm9200_timer_init,
};

53
arch/arm/mach-at91/at91sam926x_time.c
Просмотреть файл

@ -104,12 +104,38 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
}
}
static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
{
/* Disable timer */
pit_write(AT91_PIT_MR, 0);
}
static void at91sam926x_pit_reset(void)
{
/* Disable timer and irqs */
pit_write(AT91_PIT_MR, 0);
/* Clear any pending interrupts, wait for PIT to stop counting */
while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
cpu_relax();
/* Start PIT but don't enable IRQ */
pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
}
static void at91sam926x_pit_resume(struct clock_event_device *cedev)
{
at91sam926x_pit_reset();
}
static struct clock_event_device pit_clkevt = {
.name = "pit",
.features = CLOCK_EVT_FEAT_PERIODIC,
.shift = 32,
.rating = 100,
.set_mode = pit_clkevt_mode,
.suspend = at91sam926x_pit_suspend,
.resume = at91sam926x_pit_resume,
};
@ -150,19 +176,6 @@ static struct irqaction at91sam926x_pit_irq = {
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
static void at91sam926x_pit_reset(void)
{
/* Disable timer and irqs */
pit_write(AT91_PIT_MR, 0);
/* Clear any pending interrupts, wait for PIT to stop counting */
while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
cpu_relax();
/* Start PIT but don't enable IRQ */
pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
}
#ifdef CONFIG_OF
static struct of_device_id pit_timer_ids[] = {
{ .compatible = "atmel,at91sam9260-pit" },
@ -211,7 +224,7 @@ static int __init of_at91sam926x_pit_init(void)
/*
* Set up both clocksource and clockevent support.
*/
static void __init at91sam926x_pit_init(void)
void __init at91sam926x_pit_init(void)
{
unsigned long pit_rate;
unsigned bits;
@ -250,12 +263,6 @@ static void __init at91sam926x_pit_init(void)
clockevents_register_device(&pit_clkevt);
}
static void at91sam926x_pit_suspend(void)
{
/* Disable timer */
pit_write(AT91_PIT_MR, 0);
}
void __init at91sam926x_ioremap_pit(u32 addr)
{
#if defined(CONFIG_OF)
@ -272,9 +279,3 @@ void __init at91sam926x_ioremap_pit(u32 addr)
if (!pit_base_addr)
panic("Impossible to ioremap PIT\n");
}
struct sys_timer at91sam926x_timer = {
.init = at91sam926x_pit_init,
.suspend = at91sam926x_pit_suspend,
.resume = at91sam926x_pit_reset,
};

13
arch/arm/mach-at91/at91x40_time.c
Просмотреть файл

@ -42,9 +42,10 @@
#define AT91_TC_CLK1BASE 0x40
#define AT91_TC_CLK2BASE 0x80
static unsigned long at91x40_gettimeoffset(void)
static u32 at91x40_gettimeoffset(void)
{
return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
(AT91X40_MASTER_CLOCK / 128)) * 1000;
}
static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@ -64,6 +65,8 @@ void __init at91x40_timer_init(void)
{
unsigned int v;
arch_gettimeoffset = at91x40_gettimeoffset;
at91_tc_write(AT91_TC_BCR, 0);
v = at91_tc_read(AT91_TC_BMR);
v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@ -79,9 +82,3 @@ void __init at91x40_timer_init(void)
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
}
struct sys_timer at91x40_timer = {
.init = at91x40_timer_init,
.offset = at91x40_gettimeoffset,
};

2
arch/arm/mach-at91/board-1arm.c
Просмотреть файл

@ -90,7 +90,7 @@ static void __init onearm_board_init(void)
MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = onearm_init_early,

2
arch/arm/mach-at91/board-afeb-9260v1.c
Просмотреть файл

@ -210,7 +210,7 @@ static void __init afeb9260_board_init(void)
MACHINE_START(AFEB9260, "Custom afeb9260 board")
/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = afeb9260_init_early,

2
arch/arm/mach-at91/board-cam60.c
Просмотреть файл

@ -187,7 +187,7 @@ static void __init cam60_board_init(void)
MACHINE_START(CAM60, "KwikByte CAM60")
/* Maintainer: KwikByte */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = cam60_init_early,

2
arch/arm/mach-at91/board-carmeva.c
Просмотреть файл

@ -157,7 +157,7 @@ static void __init carmeva_board_init(void)
MACHINE_START(CARMEVA, "Carmeva")
/* Maintainer: Conitec Datasystems */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = carmeva_init_early,

2
arch/arm/mach-at91/board-cpu9krea.c
Просмотреть файл

@ -374,7 +374,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
#endif
/* Maintainer: Eric Benard - EUKREA Electromatique */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = cpu9krea_init_early,

2
arch/arm/mach-at91/board-cpuat91.c
Просмотреть файл

@ -178,7 +178,7 @@ static void __init cpuat91_board_init(void)
MACHINE_START(CPUAT91, "Eukrea")
/* Maintainer: Eric Benard - EUKREA Electromatique */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = cpuat91_init_early,

2
arch/arm/mach-at91/board-csb337.c
Просмотреть файл

@ -251,7 +251,7 @@ static void __init csb337_board_init(void)
MACHINE_START(CSB337, "Cogent CSB337")
/* Maintainer: Bill Gatliff */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = csb337_init_early,

2
arch/arm/mach-at91/board-csb637.c
Просмотреть файл

@ -132,7 +132,7 @@ static void __init csb637_board_init(void)
MACHINE_START(CSB637, "Cogent CSB637")
/* Maintainer: Bill Gatliff */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = csb637_init_early,

2
arch/arm/mach-at91/board-dt.c
Просмотреть файл

@ -49,7 +49,7 @@ static const char *at91_dt_board_compat[] __initdata = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = at91_dt_initialize,

2
arch/arm/mach-at91/board-eb01.c
Просмотреть файл

@ -44,7 +44,7 @@ static void __init at91eb01_init_early(void)
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.timer = &at91x40_timer,
.init_time = at91x40_timer_init,
.handle_irq = at91_aic_handle_irq,
.init_early = at91eb01_init_early,
.init_irq = at91eb01_init_irq,

2
arch/arm/mach-at91/board-eb9200.c
Просмотреть файл

@ -116,7 +116,7 @@ static void __init eb9200_board_init(void)
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = eb9200_init_early,

2
arch/arm/mach-at91/board-ecbat91.c
Просмотреть файл

@ -181,7 +181,7 @@ static void __init ecb_at91board_init(void)
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
/* Maintainer: emQbit.com */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ecb_at91init_early,

2
arch/arm/mach-at91/board-eco920.c
Просмотреть файл

@ -149,7 +149,7 @@ static void __init eco920_board_init(void)
MACHINE_START(ECO920, "eco920")
/* Maintainer: Sascha Hauer */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = eco920_init_early,

2
arch/arm/mach-at91/board-flexibity.c
Просмотреть файл

@ -159,7 +159,7 @@ static void __init flexibity_board_init(void)
MACHINE_START(FLEXIBITY, "Flexibity Connect")
/* Maintainer: Maxim Osipov */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = flexibity_init_early,

2
arch/arm/mach-at91/board-foxg20.c
Просмотреть файл

@ -261,7 +261,7 @@ static void __init foxg20_board_init(void)
MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
/* Maintainer: Sergio Tanzilli */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = foxg20_init_early,

2
arch/arm/mach-at91/board-gsia18s.c
Просмотреть файл

@ -574,7 +574,7 @@ static void __init gsia18s_board_init(void)
}
MACHINE_START(GSIA18S, "GS_IA18_S")
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = gsia18s_init_early,

2
arch/arm/mach-at91/board-kafa.c
Просмотреть файл

@ -103,7 +103,7 @@ static void __init kafa_board_init(void)
MACHINE_START(KAFA, "Sperry-Sun KAFA")
/* Maintainer: Sergei Sharonov */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = kafa_init_early,

2
arch/arm/mach-at91/board-kb9202.c
Просмотреть файл

@ -149,7 +149,7 @@ static void __init kb9202_board_init(void)
MACHINE_START(KB9200, "KB920x")
/* Maintainer: KwikByte, Inc. */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = kb9202_init_early,

2
arch/arm/mach-at91/board-neocore926.c
Просмотреть файл

@ -378,7 +378,7 @@ static void __init neocore926_board_init(void)
MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
/* Maintainer: ADENEO */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = neocore926_init_early,

2
arch/arm/mach-at91/board-pcontrol-g20.c
Просмотреть файл

@ -217,7 +217,7 @@ static void __init pcontrol_g20_board_init(void)
MACHINE_START(PCONTROL_G20, "PControl G20")
/* Maintainer: pgsellmann@portner-elektronik.at */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = pcontrol_g20_init_early,

2
arch/arm/mach-at91/board-picotux200.c
Просмотреть файл

@ -119,7 +119,7 @@ static void __init picotux200_board_init(void)
MACHINE_START(PICOTUX2XX, "picotux 200")
/* Maintainer: Kleinhenz Elektronik GmbH */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = picotux200_init_early,

2
arch/arm/mach-at91/board-qil-a9260.c
Просмотреть файл

@ -257,7 +257,7 @@ static void __init ek_board_init(void)
MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-rm9200-dt.c
Просмотреть файл

@ -47,7 +47,7 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
};
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = at91rm9200_dt_initialize,

2
arch/arm/mach-at91/board-rm9200dk.c
Просмотреть файл

@ -219,7 +219,7 @@ static void __init dk_board_init(void)
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
/* Maintainer: SAN People/Atmel */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = dk_init_early,

2
arch/arm/mach-at91/board-rm9200ek.c
Просмотреть файл

@ -186,7 +186,7 @@ static void __init ek_board_init(void)
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
/* Maintainer: SAN People/Atmel */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-rsi-ews.c
Просмотреть файл

@ -222,7 +222,7 @@ static void __init rsi_ews_board_init(void)
MACHINE_START(RSI_EWS, "RSI EWS")
/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = rsi_ews_init_early,

2
arch/arm/mach-at91/board-sam9-l9260.c
Просмотреть файл

@ -218,7 +218,7 @@ static void __init ek_board_init(void)
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
/* Maintainer: Olimex */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-sam9260ek.c
Просмотреть файл

@ -343,7 +343,7 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-sam9261ek.c
Просмотреть файл

@ -612,7 +612,7 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
#endif
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-sam9263ek.c
Просмотреть файл

@ -443,7 +443,7 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

4
arch/arm/mach-at91/board-sam9g20ek.c
Просмотреть файл

@ -409,7 +409,7 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
@ -419,7 +419,7 @@ MACHINE_END
MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-sam9m10g45ek.c
Просмотреть файл

@ -502,7 +502,7 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-sam9rlek.c
Просмотреть файл

@ -320,7 +320,7 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-snapper9260.c
Просмотреть файл

@ -177,7 +177,7 @@ static void __init snapper9260_board_init(void)
}
MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = snapper9260_init_early,

4
arch/arm/mach-at91/board-stamp9g20.c
Просмотреть файл

@ -272,7 +272,7 @@ static void __init stamp9g20evb_board_init(void)
MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = stamp9g20_init_early,
@ -282,7 +282,7 @@ MACHINE_END
MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = stamp9g20_init_early,

6
arch/arm/mach-at91/board-usb-a926x.c
Просмотреть файл

@ -355,7 +355,7 @@ static void __init ek_board_init(void)
MACHINE_START(USB_A9263, "CALAO USB_A9263")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
@ -365,7 +365,7 @@ MACHINE_END
MACHINE_START(USB_A9260, "CALAO USB_A9260")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
@ -375,7 +375,7 @@ MACHINE_END
MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
.timer = &at91sam926x_timer,
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,

2
arch/arm/mach-at91/board-yl-9200.c
Просмотреть файл

@ -587,7 +587,7 @@ static void __init yl9200_board_init(void)
MACHINE_START(YL9200, "uCdragon YL-9200")
/* Maintainer: S.Birtles */
.timer = &at91rm9200_timer,
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = yl9200_init_early,

7
arch/arm/mach-at91/generic.h
Просмотреть файл

@ -36,12 +36,11 @@ extern int __init at91_aic5_of_init(struct device_node *node,
/* Timer */
struct sys_timer;
extern void at91rm9200_ioremap_st(u32 addr);
extern struct sys_timer at91rm9200_timer;
extern void at91rm9200_timer_init(void);
extern void at91sam926x_ioremap_pit(u32 addr);
extern struct sys_timer at91sam926x_timer;
extern struct sys_timer at91x40_timer;
extern void at91sam926x_pit_init(void);
extern void at91x40_timer_init(void);
/* Clocks */
#ifdef CONFIG_AT91_PMC_UNIT

5
arch/arm/mach-bcm/board_bcm.c
Просмотреть файл

@ -24,9 +24,6 @@ static void timer_init(void)
{
}
static struct sys_timer timer = {
.init = timer_init,
};
static void __init board_init(void)
{
@ -38,7 +35,7 @@ static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
.init_irq = irqchip_init,
.timer = &timer,
.init_time = timer_init,
.init_machine = board_init,
.dt_compat = bcm11351_dt_compat,
MACHINE_END

2
arch/arm/mach-bcm2835/bcm2835.c
Просмотреть файл

@ -104,7 +104,7 @@ DT_MACHINE_START(BCM2835, "BCM2835")
.init_irq = bcm2835_init_irq,
.handle_irq = bcm2835_handle_irq,
.init_machine = bcm2835_init,
.timer = &bcm2835_timer,
.init_time = bcm2835_timer_init,
.restart = bcm2835_restart,
.dt_compat = bcm2835_compat
MACHINE_END

2
arch/arm/mach-clps711x/board-autcpu12.c
Просмотреть файл

@ -170,7 +170,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
.nr_irqs = CLPS711X_NR_IRQS,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.init_time = clps711x_timer_init,
.init_machine = autcpu12_init,
.init_late = autcpu12_init_late,
.handle_irq = clps711x_handle_irq,

2
arch/arm/mach-clps711x/board-cdb89712.c
Просмотреть файл

@ -140,7 +140,7 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
.nr_irqs = CLPS711X_NR_IRQS,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.init_time = clps711x_timer_init,
.init_machine = cdb89712_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,

2
arch/arm/mach-clps711x/board-clep7312.c
Просмотреть файл

@ -40,7 +40,7 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.init_time = clps711x_timer_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
MACHINE_END

2
arch/arm/mach-clps711x/board-edb7211.c
Просмотреть файл

@ -173,7 +173,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
.reserve = edb7211_reserve,
.map_io = edb7211_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.init_time = clps711x_timer_init,
.init_machine = edb7211_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,

2
arch/arm/mach-clps711x/board-fortunet.c
Просмотреть файл

@ -78,7 +78,7 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.init_time = clps711x_timer_init,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
MACHINE_END

2
arch/arm/mach-clps711x/board-p720t.c
Просмотреть файл

@ -224,7 +224,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
.map_io = p720t_map_io,
.init_early = p720t_init_early,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.init_time = clps711x_timer_init,
.init_machine = p720t_init,
.init_late = p720t_init_late,
.handle_irq = clps711x_handle_irq,

6
arch/arm/mach-clps711x/common.c
Просмотреть файл

@ -282,7 +282,7 @@ static void add_fixed_clk(struct clk *clk, const char *name, int rate)
clk_register_clkdev(clk, name, NULL);
}
static void __init clps711x_timer_init(void)
void __init clps711x_timer_init(void)
{
int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
u32 tmp;
@ -345,10 +345,6 @@ static void __init clps711x_timer_init(void)
setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
}
struct sys_timer clps711x_timer = {
.init = clps711x_timer_init,
};
void clps711x_restart(char mode, const char *cmd)
{
soft_restart(0);

4
arch/arm/mach-clps711x/common.h
Просмотреть файл

@ -8,10 +8,8 @@
#define CLPS711X_NR_GPIO (4 * 8 + 3)
#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit))
struct sys_timer;
extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
extern void clps711x_timer_init(void);
extern void clps711x_handle_irq(struct pt_regs *regs);
extern void clps711x_restart(char mode, const char *cmd);
extern struct sys_timer clps711x_timer;

2
arch/arm/mach-cns3xxx/cns3420vb.c
Просмотреть файл

@ -249,7 +249,7 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
.atag_offset = 0x100,
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.timer = &cns3xxx_timer,
.init_time = cns3xxx_timer_init,
.init_machine = cns3420_init,
.restart = cns3xxx_restart,
MACHINE_END

19
arch/arm/mach-cns3xxx/core.c
Просмотреть файл

@ -134,7 +134,6 @@ static int cns3xxx_timer_set_next_event(unsigned long evt,
static struct clock_event_device cns3xxx_tmr1_clockevent = {
.name = "cns3xxx timer1",
.shift = 8,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = cns3xxx_timer_set_mode,
.set_next_event = cns3xxx_timer_set_next_event,
@ -145,15 +144,9 @@ static struct clock_event_device cns3xxx_tmr1_clockevent = {
static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
{
cns3xxx_tmr1_clockevent.irq = timer_irq;
cns3xxx_tmr1_clockevent.mult =
div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
cns3xxx_tmr1_clockevent.shift);
cns3xxx_tmr1_clockevent.max_delta_ns =
clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
cns3xxx_tmr1_clockevent.min_delta_ns =
clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
clockevents_register_device(&cns3xxx_tmr1_clockevent);
clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
(cns3xxx_cpu_clock() >> 3) * 1000000,
0xf, 0xffffffff);
}
/*
@ -235,17 +228,13 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
cns3xxx_clockevents_init(timer_irq);
}
static void __init cns3xxx_timer_init(void)
void __init cns3xxx_timer_init(void)
{
cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
}
struct sys_timer cns3xxx_timer = {
.init = cns3xxx_timer_init,
};
#ifdef CONFIG_CACHE_L2X0
void __init cns3xxx_l2x0_init(void)

2
arch/arm/mach-cns3xxx/core.h
Просмотреть файл

@ -11,7 +11,7 @@
#ifndef __CNS3XXX_CORE_H
#define __CNS3XXX_CORE_H
extern struct sys_timer cns3xxx_timer;
extern void cns3xxx_timer_init(void);
#ifdef CONFIG_CACHE_L2X0
void __init cns3xxx_l2x0_init(void);

2
arch/arm/mach-davinci/board-da830-evm.c
Просмотреть файл

@ -679,7 +679,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
.atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = da830_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-da850-evm.c
Просмотреть файл

@ -1599,7 +1599,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = da850_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-dm355-evm.c
Просмотреть файл

@ -355,7 +355,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
.atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = dm355_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-dm355-leopard.c
Просмотреть файл

@ -274,7 +274,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
.atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = dm355_leopard_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-dm365-evm.c
Просмотреть файл

@ -616,7 +616,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
.atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = dm365_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-dm644x-evm.c
Просмотреть файл

@ -825,7 +825,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
.atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = davinci_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

4
arch/arm/mach-davinci/board-dm646x-evm.c
Просмотреть файл

@ -818,7 +818,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
@ -829,7 +829,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-mityomapl138.c
Просмотреть файл

@ -570,7 +570,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
.atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = mityomapl138_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-neuros-osd2.c
Просмотреть файл

@ -237,7 +237,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
.atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = davinci_ntosd2_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-omapl138-hawk.c
Просмотреть файл

@ -341,7 +341,7 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = omapl138_hawk_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-sffsdr.c
Просмотреть файл

@ -155,7 +155,7 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
.atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = davinci_sffsdr_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/board-tnetv107x-evm.c
Просмотреть файл

@ -280,7 +280,7 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
.atag_offset = 0x100,
.map_io = tnetv107x_init,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = tnetv107x_evm_board_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,

2
arch/arm/mach-davinci/da8xx-dt.c
Просмотреть файл

@ -56,7 +56,7 @@ static const char *da850_boards_compat[] __initdata = {
DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
.map_io = da850_init,
.init_irq = da8xx_init_irq,
.timer = &davinci_timer,
.init_time = davinci_timer_init,
.init_machine = da850_init_machine,
.dt_compat = da850_boards_compat,
.init_late = davinci_init_late,

4
arch/arm/mach-davinci/include/mach/common.h
Просмотреть файл

@ -15,9 +15,7 @@
#include <linux/compiler.h>
#include <linux/types.h>
struct sys_timer;
extern struct sys_timer davinci_timer;
extern void davinci_timer_init(void);
extern void davinci_irq_init(void);
extern void __iomem *davinci_intc_base;

7
arch/arm/mach-davinci/time.c
Просмотреть файл

@ -337,7 +337,7 @@ static struct clock_event_device clockevent_davinci = {
};
static void __init davinci_timer_init(void)
void __init davinci_timer_init(void)
{
struct clk *timer_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
@ -410,11 +410,6 @@ static void __init davinci_timer_init(void)
timer32_config(&timers[i]);
}
struct sys_timer davinci_timer = {
.init = davinci_timer_init,
};
/* reset board using watchdog timer */
void davinci_watchdog_reset(struct platform_device *pdev)
{

2
arch/arm/mach-dove/cm-a510.c
Просмотреть файл

@ -92,6 +92,6 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
.init_time = dove_timer_init,
.restart = dove_restart,
MACHINE_END

8
arch/arm/mach-dove/common.c
Просмотреть файл

@ -242,17 +242,13 @@ static int __init dove_find_tclk(void)
return 166666667;
}
static void __init dove_timer_init(void)
void __init dove_timer_init(void)
{
dove_tclk = dove_find_tclk();
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_DOVE_BRIDGE, dove_tclk);
}
struct sys_timer dove_timer = {
.init = dove_timer_init,
};
/*****************************************************************************
* Cryptographic Engines and Security Accelerator (CESA)
****************************************************************************/
@ -454,7 +450,7 @@ DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = orion_dt_init_irq,
.timer = &dove_timer,
.init_time = dove_timer_init,
.init_machine = dove_dt_init,
.restart = dove_restart,
.dt_compat = dove_dt_board_compat,

2
arch/arm/mach-dove/common.h
Просмотреть файл

@ -14,7 +14,7 @@
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
extern struct sys_timer dove_timer;
extern void dove_timer_init(void);
/*
* Basic Dove init functions used early by machine-setup.

2
arch/arm/mach-dove/dove-db-setup.c
Просмотреть файл

@ -98,6 +98,6 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
.init_time = dove_timer_init,
.restart = dove_restart,
MACHINE_END

15
arch/arm/mach-ebsa110/core.c
Просмотреть файл

@ -158,7 +158,7 @@ static void __init ebsa110_init_early(void)
* interrupt, then the PIT counter will roll over (ie, be negative).
* This actually works out to be convenient.
*/
static unsigned long ebsa110_gettimeoffset(void)
static u32 ebsa110_gettimeoffset(void)
{
unsigned long offset, count;
@ -181,7 +181,7 @@ static unsigned long ebsa110_gettimeoffset(void)
*/
offset = offset * (1000000 / HZ) / COUNT;
return offset;
return offset * 1000;
}
static irqreturn_t
@ -213,8 +213,10 @@ static struct irqaction ebsa110_timer_irq = {
/*
* Set up timer interrupt.
*/
static void __init ebsa110_timer_init(void)
void __init ebsa110_timer_init(void)
{
arch_gettimeoffset = ebsa110_gettimeoffset;
/*
* Timer 1, mode 2, LSB/MSB
*/
@ -225,11 +227,6 @@ static void __init ebsa110_timer_init(void)
setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
}
static struct sys_timer ebsa110_timer = {
.init = ebsa110_timer_init,
.offset = ebsa110_gettimeoffset,
};
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
@ -328,6 +325,6 @@ MACHINE_START(EBSA110, "EBSA110")
.map_io = ebsa110_map_io,
.init_early = ebsa110_init_early,
.init_irq = ebsa110_init_irq,
.timer = &ebsa110_timer,
.init_time = ebsa110_timer_init,
.restart = ebsa110_restart,
MACHINE_END

2
arch/arm/mach-ep93xx/adssphere.c
Просмотреть файл

@ -38,7 +38,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = adssphere_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

35
arch/arm/mach-ep93xx/core.c
Просмотреть файл

@ -139,11 +139,29 @@ static struct irqaction ep93xx_timer_irq = {
.handler = ep93xx_timer_interrupt,
};
static void __init ep93xx_timer_init(void)
static u32 ep93xx_gettimeoffset(void)
{
int offset;
offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
/*
* Timer 4 is based on a 983.04 kHz reference clock,
* so dividing by 983040 gives the fraction of a second,
* so dividing by 0.983040 converts to uS.
* Refactor the calculation to avoid overflow.
* Finally, multiply by 1000 to give nS.
*/
return (offset + (53 * offset / 3072)) * 1000;
}
void __init ep93xx_timer_init(void)
{
u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
EP93XX_TIMER123_CONTROL_CLKSEL;
arch_gettimeoffset = ep93xx_gettimeoffset;
/* Enable periodic HZ timer. */
__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
@ -157,21 +175,6 @@ static void __init ep93xx_timer_init(void)
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
static unsigned long ep93xx_gettimeoffset(void)
{
int offset;
offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
/* Calculate (1000000 / 983040) * offset. */
return offset + (53 * offset / 3072);
}
struct sys_timer ep93xx_timer = {
.init = ep93xx_timer_init,
.offset = ep93xx_gettimeoffset,
};
/*************************************************************************
* EP93xx IRQ handling

16
arch/arm/mach-ep93xx/edb93xx.c
Просмотреть файл

@ -275,7 +275,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -288,7 +288,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -301,7 +301,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -314,7 +314,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -327,7 +327,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -340,7 +340,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -353,7 +353,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -366,7 +366,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = edb93xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

2
arch/arm/mach-ep93xx/gesbc9312.c
Просмотреть файл

@ -38,7 +38,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = gesbc9312_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

2
arch/arm/mach-ep93xx/include/mach/platform.h
Просмотреть файл

@ -53,7 +53,7 @@ int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
void ep93xx_ide_release_gpio(struct platform_device *pdev);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
extern void ep93xx_timer_init(void);
void ep93xx_restart(char, const char *);
void ep93xx_init_late(void);

8
arch/arm/mach-ep93xx/micro9.c
Просмотреть файл

@ -81,7 +81,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -94,7 +94,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -107,7 +107,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,
@ -120,7 +120,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = micro9_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

2
arch/arm/mach-ep93xx/simone.c
Просмотреть файл

@ -82,7 +82,7 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = simone_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

2
arch/arm/mach-ep93xx/snappercl15.c
Просмотреть файл

@ -175,7 +175,7 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = snappercl15_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

2
arch/arm/mach-ep93xx/ts72xx.c
Просмотреть файл

@ -245,7 +245,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
.atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = ts72xx_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

2
arch/arm/mach-ep93xx/vision_ep9307.c
Просмотреть файл

@ -363,7 +363,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
.atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_time = ep93xx_timer_init,
.init_machine = vision_init_machine,
.init_late = ep93xx_init_late,
.restart = ep93xx_restart,

2
arch/arm/mach-exynos/common.h
Просмотреть файл

@ -12,7 +12,7 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
extern struct sys_timer exynos4_timer;
extern void exynos4_timer_init(void);
struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);

2
arch/arm/mach-exynos/mach-armlex4210.c
Просмотреть файл

@ -202,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.restart = exynos4_restart,
MACHINE_END

2
arch/arm/mach-exynos/mach-exynos4-dt.c
Просмотреть файл

@ -108,7 +108,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
.map_io = exynos4_dt_map_io,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
MACHINE_END

2
arch/arm/mach-exynos/mach-exynos5-dt.c
Просмотреть файл

@ -180,7 +180,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
.map_io = exynos5_dt_map_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,

2
arch/arm/mach-exynos/mach-nuri.c
Просмотреть файл

@ -1380,7 +1380,7 @@ MACHINE_START(NURI, "NURI")
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
MACHINE_END

2
arch/arm/mach-exynos/mach-origen.c
Просмотреть файл

@ -815,7 +815,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
.map_io = origen_map_io,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END

4
arch/arm/mach-exynos/mach-smdk4x12.c
Просмотреть файл

@ -376,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
@ -390,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END

4
arch/arm/mach-exynos/mach-smdkv310.c
Просмотреть файл

@ -423,7 +423,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
@ -436,7 +436,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.init_time = exynos4_timer_init,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END

2
arch/arm/mach-exynos/mach-universal_c210.c
Просмотреть файл

@ -1152,7 +1152,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
.timer = &s5p_timer,
.init_time = s5p_timer_init,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END

24
arch/arm/mach-exynos/mct.c
Просмотреть файл

@ -254,13 +254,9 @@ static struct irqaction mct_comp_event_irq = {
static void exynos4_clockevent_init(void)
{
clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
mct_comp_device.max_delta_ns =
clockevent_delta2ns(0xffffffff, &mct_comp_device);
mct_comp_device.min_delta_ns =
clockevent_delta2ns(0xf, &mct_comp_device);
mct_comp_device.cpumask = cpumask_of(0);
clockevents_register_device(&mct_comp_device);
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
if (soc_is_exynos5250())
setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
@ -403,14 +399,8 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
evt->set_mode = exynos4_tick_set_mode;
evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
evt->rating = 450;
clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
evt->max_delta_ns =
clockevent_delta2ns(0x7fffffff, evt);
evt->min_delta_ns =
clockevent_delta2ns(0xf, evt);
clockevents_register_device(evt);
clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
0xf, 0x7fffffff);
exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
@ -477,7 +467,7 @@ static void __init exynos4_timer_resources(void)
#endif /* CONFIG_LOCAL_TIMERS */
}
static void __init exynos_timer_init(void)
void __init exynos4_timer_init(void)
{
if (soc_is_exynos5440()) {
arch_timer_of_register();
@ -493,7 +483,3 @@ static void __init exynos_timer_init(void)
exynos4_clocksource_init();
exynos4_clockevent_init();
}
struct sys_timer exynos4_timer = {
.init = exynos_timer_init,
};

2
arch/arm/mach-footbridge/cats-hw.c
Просмотреть файл

@ -90,6 +90,6 @@ MACHINE_START(CATS, "Chalice-CATS")
.fixup = fixup_cats,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
.init_time = isa_timer_init,
.restart = footbridge_restart,
MACHINE_END

4
arch/arm/mach-footbridge/common.h
Просмотреть файл

@ -1,6 +1,6 @@
extern struct sys_timer footbridge_timer;
extern struct sys_timer isa_timer;
extern void footbridge_timer_init(void);
extern void isa_timer_init(void);
extern void isa_rtc_init(void);

12
arch/arm/mach-footbridge/dc21285-timer.c
Просмотреть файл

@ -93,7 +93,7 @@ static struct irqaction footbridge_timer_irq = {
/*
* Set up timer interrupt.
*/
static void __init footbridge_timer_init(void)
void __init footbridge_timer_init(void)
{
struct clock_event_device *ce = &ckevt_dc21285;
@ -101,14 +101,6 @@ static void __init footbridge_timer_init(void)
setup_irq(ce->irq, &footbridge_timer_irq);
clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
ce->cpumask = cpumask_of(smp_processor_id());
clockevents_register_device(ce);
clockevents_config_and_register(ce, mem_fclk_21285, 0x4, 0xffffff);
}
struct sys_timer footbridge_timer = {
.init = footbridge_timer_init,
};

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше