pinctrl: aspeed: Use masks to describe pinconf bitfields

Since some of the AST2600 pinconf setting are not just single bit, modified
aspeed_pin_config @bit to @mask and add @mask to aspeed_pin_config_map to
support configuring multiple bits.

Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
[AJ: Tweak commit message]
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20191202061432.3996-7-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Johnny Huang 2019-12-02 16:44:31 +10:30 коммит произвёл Linus Walleij
Родитель 5b854f2842
Коммит 5f52c85384
4 изменённых файлов: 20 добавлений и 19 удалений

Просмотреть файл

@ -2595,11 +2595,11 @@ static int aspeed_g4_sig_expr_set(struct aspeed_pinmux_data *ctx,
}
static const struct aspeed_pin_config_map aspeed_g4_pin_config_map[] = {
{ PIN_CONFIG_BIAS_PULL_DOWN, 0, 1},
{ PIN_CONFIG_BIAS_PULL_DOWN, -1, 0},
{ PIN_CONFIG_BIAS_DISABLE, -1, 1},
{ PIN_CONFIG_DRIVE_STRENGTH, 8, 0},
{ PIN_CONFIG_DRIVE_STRENGTH, 16, 1},
{ PIN_CONFIG_BIAS_PULL_DOWN, 0, 1, BIT_MASK(0)},
{ PIN_CONFIG_BIAS_PULL_DOWN, -1, 0, BIT_MASK(0)},
{ PIN_CONFIG_BIAS_DISABLE, -1, 1, BIT_MASK(0)},
{ PIN_CONFIG_DRIVE_STRENGTH, 8, 0, BIT_MASK(0)},
{ PIN_CONFIG_DRIVE_STRENGTH, 16, 1, BIT_MASK(0)},
};
static const struct aspeed_pinmux_ops aspeed_g4_ops = {

Просмотреть файл

@ -2781,11 +2781,11 @@ static int aspeed_g5_sig_expr_set(struct aspeed_pinmux_data *ctx,
}
static const struct aspeed_pin_config_map aspeed_g5_pin_config_map[] = {
{ PIN_CONFIG_BIAS_PULL_DOWN, 0, 1},
{ PIN_CONFIG_BIAS_PULL_DOWN, -1, 0},
{ PIN_CONFIG_BIAS_DISABLE, -1, 1},
{ PIN_CONFIG_DRIVE_STRENGTH, 8, 0},
{ PIN_CONFIG_DRIVE_STRENGTH, 16, 1},
{ PIN_CONFIG_BIAS_PULL_DOWN, 0, 1, BIT_MASK(0)},
{ PIN_CONFIG_BIAS_PULL_DOWN, -1, 0, BIT_MASK(0)},
{ PIN_CONFIG_BIAS_DISABLE, -1, 1, BIT_MASK(0)},
{ PIN_CONFIG_DRIVE_STRENGTH, 8, 0, BIT_MASK(0)},
{ PIN_CONFIG_DRIVE_STRENGTH, 16, 1, BIT_MASK(0)},
};
static const struct aspeed_pinmux_ops aspeed_g5_ops = {

Просмотреть файл

@ -464,7 +464,7 @@ int aspeed_pin_config_get(struct pinctrl_dev *pctldev, unsigned int offset,
return rc;
pmap = find_pinconf_map(pdata, param, MAP_TYPE_VAL,
(val & BIT(pconf->bit)) >> pconf->bit);
(val & pconf->mask) >> __ffs(pconf->mask));
if (!pmap)
return -EINVAL;
@ -512,17 +512,17 @@ int aspeed_pin_config_set(struct pinctrl_dev *pctldev, unsigned int offset,
if (WARN_ON(!pmap))
return -EINVAL;
val = pmap->val << pconf->bit;
val = pmap->val << __ffs(pconf->mask);
rc = regmap_update_bits(pdata->scu, pconf->reg,
BIT(pconf->bit), val);
pmap->mask, val);
if (rc < 0)
return rc;
pr_debug("%s: Set SCU%02X[%d]=%d for param %d(=%d) on pin %d\n",
__func__, pconf->reg, pconf->bit, pmap->val,
param, arg, offset);
pr_debug("%s: Set SCU%02X[%lu]=%d for param %d(=%d) on pin %d\n",
__func__, pconf->reg, __ffs(pconf->mask),
pmap->val, param, arg, offset);
}
return 0;

Просмотреть файл

@ -24,8 +24,7 @@ struct aspeed_pin_config {
enum pin_config_param param;
unsigned int pins[2];
unsigned int reg;
u8 bit;
u8 value;
u32 mask;
};
#define ASPEED_PINCTRL_PIN(name_) \
@ -39,7 +38,7 @@ struct aspeed_pin_config {
.param = param_, \
.pins = {pin0_, pin1_}, \
.reg = reg_, \
.bit = bit_ \
.mask = BIT_MASK(bit_) \
}
/*
@ -48,6 +47,7 @@ struct aspeed_pin_config {
* @param: pinconf configuration parameter
* @arg: The supported argument for @param, or -1 if any value is supported
* @val: The register value to write to configure @arg for @param
* @mask: The bitfield mask for @val
*
* The map is to be used in conjunction with the configuration array supplied
* by the driver implementation.
@ -56,6 +56,7 @@ struct aspeed_pin_config_map {
enum pin_config_param param;
s32 arg;
u32 val;
u32 mask;
};
struct aspeed_pinctrl_data {