ALSA: usb-audio: Fix some typos

Fix the following typos in comments and in the code:
 - KHz -> kHz
 - procssed -> processed

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200629032607.255419-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Alexander Tsoy 2020-06-29 06:26:07 +03:00 коммит произвёл Takashi Iwai
Родитель 81033c6b58
Коммит 5ff40e6d0f
4 изменённых файлов: 14 добавлений и 14 удалений

Просмотреть файл

@ -554,11 +554,11 @@ int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer)
dev_info(&dev->dev,
"Presonus Studio 1810c, device_setup: %u\n", chip->setup);
if (chip->setup == 1)
dev_info(&dev->dev, "(8out/18in @ 48KHz)\n");
dev_info(&dev->dev, "(8out/18in @ 48kHz)\n");
else if (chip->setup == 2)
dev_info(&dev->dev, "(6out/8in @ 192KHz)\n");
dev_info(&dev->dev, "(6out/8in @ 192kHz)\n");
else
dev_info(&dev->dev, "(8out/14in @ 96KHz)\n");
dev_info(&dev->dev, "(8out/14in @ 96kHz)\n");
ret = snd_s1810c_init_mixer_maps(chip);
if (ret < 0)

Просмотреть файл

@ -332,7 +332,7 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
},
[SCARLETT2_PORT_TYPE_SPDIF] = {
.id = 0x180,
/* S/PDIF outputs aren't available at 192KHz
/* S/PDIF outputs aren't available at 192kHz
* but are included in the USB mux I/O
* assignment message anyway
*/
@ -401,7 +401,7 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
.dst_descr = "Analogue Output %02d Playback"
},
[SCARLETT2_PORT_TYPE_SPDIF] = {
/* S/PDIF outputs aren't available at 192KHz
/* S/PDIF outputs aren't available at 192kHz
* but are included in the USB mux I/O
* assignment message anyway
*/

Просмотреть файл

@ -1694,8 +1694,8 @@ static void retire_playback_urb(struct snd_usb_substream *subs,
int processed = urb->transfer_buffer_length / ep->stride;
int est_delay;
/* ignore the delay accounting when procssed=0 is given, i.e.
* silent payloads are procssed before handling the actual data
/* ignore the delay accounting when processed=0 is given, i.e.
* silent payloads are processed before handling the actual data
*/
if (!processed)
return;

Просмотреть файл

@ -1144,14 +1144,14 @@ static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
#define MAUDIO_SET 0x01 /* parse device_setup */
#define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */
#define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */
#define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */
#define MAUDIO_SET_96K 0x04 /* 48-96kHz rate if set, 8-48kHz otherwise */
#define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */
#define MAUDIO_SET_DI 0x10 /* enable Digital Input */
#define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */
#define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */
#define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */
#define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */
#define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */
#define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48kHz+Digital Input */
#define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48kHz+No Digital Input */
#define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48kHz+Digital Input */
#define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48kHz+No Digital Input */
static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
int iface, int altno)
@ -1597,7 +1597,7 @@ void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
/*
* M-Audio Fast Track C400/C600 - when packets are not skipped, real
* world latency varies by approx. +/- 50 frames (at 96KHz) each time
* world latency varies by approx. +/- 50 frames (at 96kHz) each time
* the stream is (re)started. When skipping packets 16 at endpoint
* start up, the real world latency is stable within +/- 1 frame (also
* across power cycles).
@ -1831,7 +1831,7 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
/*
* MaxPacketsOnly attribute is erroneously set in endpoint
* descriptors. As a result this card produces noise with
* all sample rates other than 96 KHz.
* all sample rates other than 96 kHz.
*/
fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
break;