Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 15
-EXTRAVERSION =-rc2
+EXTRAVERSION =-rc3
 NAME=Affluent Albatross
 
 # *DOCUMENTATION*

arch/arm/configs/corgi_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
+# Linux kernel version: 2.6.15-rc2
-# Sun Oct  9 15:46:42 2005
+# Mon Nov 28 10:30:09 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -63,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -98,12 +116,14 @@ CONFIG_ARCH_PXA=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_PXA_SHARPSL_25x=y
 # CONFIG_PXA_SHARPSL_27x is not set
-# CONFIG_MACH_POODLE is not set
+CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
+CONFIG_MACH_TOSA=y
 CONFIG_PXA25x=y
 CONFIG_PXA_SHARP_C7xx=y
+CONFIG_PXA_SSP=y
 
 #
 # Processor Type
@@ -155,6 +175,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -235,6 +256,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
 
 #
@@ -356,6 +381,10 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -413,6 +442,7 @@ CONFIG_IRCOMM=m
 # CONFIG_SMC_IRCC_FIR is not set
 # CONFIG_ALI_FIR is not set
 # CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -431,7 +461,6 @@ CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -458,6 +487,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -477,6 +511,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -531,6 +566,11 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_SHARPSL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -551,14 +591,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -625,6 +657,7 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -748,6 +781,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -850,11 +884,15 @@ CONFIG_UNIX98_PTYS=y
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -889,6 +927,7 @@ CONFIG_I2C_PXA=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -957,7 +996,10 @@ CONFIG_VIDEO_DEV=m
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
 # CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_EM28XX is not set
 # CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
 
 #
 # Radio Adapters
@@ -976,13 +1018,12 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_PXA is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -991,6 +1032,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -1087,15 +1129,15 @@ CONFIG_USB_SL811_CS=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1107,7 +1149,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -1185,6 +1226,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1340,6 +1382,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1466,7 +1509,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y

arch/arm/configs/spitz_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
+# Linux kernel version: 2.6.15-rc2
-# Sun Oct  9 17:11:19 2005
+# Mon Nov 28 10:26:52 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -63,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@@ -85,6 +102,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -98,10 +116,13 @@ CONFIG_ARCH_PXA=y
 CONFIG_PXA_SHARPSL=y
 # CONFIG_PXA_SHARPSL_25x is not set
 CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_AKITA=y
 CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
 CONFIG_PXA27x=y
+CONFIG_IWMMXT=y
 CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_PXA_SSP=y
 
 #
 # Processor Type
@@ -153,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -233,6 +255,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
 
 #
@@ -354,6 +380,10 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -411,6 +441,7 @@ CONFIG_IRCOMM=m
 # CONFIG_SMC_IRCC_FIR is not set
 # CONFIG_ALI_FIR is not set
 # CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -429,7 +460,6 @@ CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -456,6 +486,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -475,6 +510,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -529,6 +565,11 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_SHARPSL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -549,14 +590,6 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -623,6 +656,7 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -746,6 +780,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -771,6 +806,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
 
 #
 # Input Device Drivers
@@ -848,11 +884,15 @@ CONFIG_UNIX98_PTYS=y
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -891,14 +931,13 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -907,6 +946,7 @@ CONFIG_FB_PXA=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -965,15 +1005,15 @@ CONFIG_USB_SL811_CS=m
 #
 # USB Device Class drivers
 #
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -985,7 +1025,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -1058,6 +1097,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1218,6 +1258,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1344,7 +1385,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y

arch/arm/kernel/head.S

@@ -17,7 +17,6 @@
 
 #include <asm/assembler.h>
 #include <asm/domain.h>
-#include <asm/mach-types.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
@@ -83,7 +82,7 @@ ENTRY(stext)
 						@ and irqs disabled
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
-	beq	__error_p				@ yes, error 'p'
+	beq	__error_p			@ yes, error 'p'
 	bl	__lookup_machine_type		@ r5=machinfo
 	movs	r8, r5				@ invalid machine (r5=0)?
 	beq	__error_a			@ yes, error 'a'
@@ -343,16 +342,12 @@ __create_page_tables:
 	bne	1b
 #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
 	/*
-	 * If we're using the NetWinder, we need to map in
+	 * If we're using the NetWinder or CATS, we also need to map
-	 * the 16550-type serial port for the debug messages
+	 * in the 16550-type serial port for the debug messages
 	 */
-	teq	r1, #MACH_TYPE_NETWINDER
-	teqne	r1, #MACH_TYPE_CATS
-	bne	1f
 	add	r0, r4, #0xff000000 >> 18
 	orr	r3, r7, #0x7c000000
 	str	r3, [r0]
-1:
 #endif
 #ifdef CONFIG_ARCH_RPC
 	/*

arch/arm/mach-pxa/Kconfig

@@ -44,6 +44,7 @@ config PXA_SHARPSL_25x
 config PXA_SHARPSL_27x
 	bool "Sharp PXA270 models (SL-Cxx00)"
 	select PXA27x
+	select IWMMXT
 
 endchoice
 
@@ -60,7 +61,6 @@ config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
 	depends PXA_SHARPSL_25x
 	select PXA_SHARP_C7xx
-	select PXA_SSP
 
 config MACH_SHEPHERD
 	bool "Enable Sharp SL-C750 (Shepherd) Support"
@@ -90,7 +90,7 @@ config MACH_BORZOI
 
 config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends PXA_SHARPSL
+	depends PXA_SHARPSL_25x
 
 config PXA25x
 	bool

arch/arm/mach-realview/core.c

@@ -30,7 +30,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
-#include <asm/mach-types.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/arm_timer.h>

arch/arm/mm/consistent.c

@@ -66,6 +66,7 @@ struct vm_region {
 	unsigned long		vm_start;
 	unsigned long		vm_end;
 	struct page		*vm_pages;
+	int			vm_active;
 };
 
 static struct vm_region consistent_head = {
@@ -104,6 +105,7 @@ vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
 	list_add_tail(&new->vm_list, &c->vm_list);
 	new->vm_start = addr;
 	new->vm_end = addr + size;
+	new->vm_active = 1;
 
 	spin_unlock_irqrestore(&consistent_lock, flags);
 	return new;
@@ -120,7 +122,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
 	struct vm_region *c;
 	
 	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if (c->vm_start == addr)
+		if (c->vm_active && c->vm_start == addr)
 			goto out;
 	}
 	c = NULL;
@@ -319,6 +321,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
 
 /*
  * free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
  */
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
@@ -326,14 +329,18 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 	unsigned long flags, addr;
 	pte_t *ptep;
 
+	WARN_ON(irqs_disabled());
+
 	size = PAGE_ALIGN(size);
 
 	spin_lock_irqsave(&consistent_lock, flags);
-
 	c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
 	if (!c)
 		goto no_area;
 
+	c->vm_active = 0;
+	spin_unlock_irqrestore(&consistent_lock, flags);
+
 	if ((c->vm_end - c->vm_start) != size) {
 		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
 		       __func__, c->vm_end - c->vm_start, size);
@@ -372,8 +379,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 
 	flush_tlb_kernel_range(c->vm_start, c->vm_end);
 
+	spin_lock_irqsave(&consistent_lock, flags);
 	list_del(&c->vm_list);
-
 	spin_unlock_irqrestore(&consistent_lock, flags);
 
 	kfree(c);

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Fri Nov 11 21:55:04 2005
+# Last update: Fri Nov 25 14:43:04 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -857,12 +857,12 @@ osiris			MACH_OSIRIS		OSIRIS			842
 maestro			MACH_MAESTRO		MAESTRO			843
 tunge2			MACH_TUNGE2		TUNGE2			844
 ixbbm			MACH_IXBBM		IXBBM			845
-mx27			MACH_MX27		MX27			846
+mx27ads			MACH_MX27		MX27			846
 ax8004			MACH_AX8004		AX8004			847
 at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
 loft			MACH_LOFT		LOFT			849
 magpie			MACH_MAGPIE		MAGPIE			850
-mx21			MACH_MX21		MX21			851
+mx21ads			MACH_MX21		MX21			851
 mb87m3400		MACH_MB87M3400		MB87M3400		852
 mguard_delta		MACH_MGUARD_DELTA	MGUARD_DELTA		853
 davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
@@ -897,10 +897,16 @@ omi_board		MACH_OMI_BOARD		OMI_BOARD		882
 mx21civ			MACH_MX21CIV		MX21CIV			883
 mahi_cdac		MACH_MAHI_CDAC		MAHI_CDAC		884
 xscale_palmtx		MACH_XSCALE_PALMTX	XSCALE_PALMTX		885
-arch_s3c2413		MACH_ARCH_S3C2413	ARCH_S3C2413		886
 s3c2413			MACH_S3C2413		S3C2413			887
 samsys_ep0		MACH_SAMSYS_EP0		SAMSYS_EP0		888
 wg302v1			MACH_WG302V1		WG302V1			889
 wg302v2			MACH_WG302V2		WG302V2			890
 eb42x			MACH_EB42X		EB42X			891
 iq331es			MACH_IQ331ES		IQ331ES			892
+cosydsp			MACH_COSYDSP		COSYDSP			893
+uplat7d			MACH_UPLAT7D		UPLAT7D			894
+ptdavinci		MACH_PTDAVINCI		PTDAVINCI		895
+mbus			MACH_MBUS		MBUS			896
+nadia2vb		MACH_NADIA2VB		NADIA2VB		897
+r1000			MACH_R1000		R1000			898
+hw90250			MACH_HW90250		HW90250			899

arch/frv/kernel/semaphore.c

@@ -20,7 +20,7 @@ struct sem_waiter {
 	struct task_struct	*task;
 };
 
-#if SEM_DEBUG
+#if SEMAPHORE_DEBUG
 void semtrace(struct semaphore *sem, const char *str)
 {
 	if (sem->debug)

arch/frv/mb93090-mb00/pci-irq.c

@@ -60,7 +60,7 @@ void __init pcibios_fixup_irqs(void)
 	}
 }
 
-void __init pcibios_penalize_isa_irq(int irq, int active)
+void __init pcibios_penalize_isa_irq(int irq)
 {
 }
 

arch/frv/mm/init.c

@@ -108,7 +108,7 @@ void __init paging_init(void)
 
 	memset((void *) empty_zero_page, 0, PAGE_SIZE);
 
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
 	if (num_physpages - num_mappedpages) {
 		pgd_t *pge;
 		pud_t *pue;

arch/frv/mm/pgalloc.c

@@ -85,7 +85,7 @@ static inline void pgd_list_add(pgd_t *pgd)
 	struct page *page = virt_to_page(pgd);
 	page->index = (unsigned long) pgd_list;
 	if (pgd_list)
-		pgd_list->private = (unsigned long) &page->index;
+		set_page_private(pgd_list, (unsigned long) &page->index);
 	pgd_list = page;
 	set_page_private(page, (unsigned long)&pgd_list);
 }
@@ -94,10 +94,10 @@ static inline void pgd_list_del(pgd_t *pgd)
 {
 	struct page *next, **pprev, *page = virt_to_page(pgd);
 	next = (struct page *) page->index;
-	pprev = (struct page **)page_private(page);
+	pprev = (struct page **) page_private(page);
 	*pprev = next;
 	if (next)
-		next->private = (unsigned long) pprev;
+		set_page_private(next, (unsigned long) pprev);
 }
 
 void pgd_ctor(void *pgd, kmem_cache_t *cache, unsigned long unused)

arch/i386/kernel/io_apic.c

@@ -2009,7 +2009,7 @@ static void ack_edge_ioapic_vector(unsigned int vector)
 {
 	int irq = vector_to_irq(vector);
 
-	move_irq(vector);
+	move_native_irq(vector);
 	ack_edge_ioapic_irq(irq);
 }
 
@@ -2024,7 +2024,7 @@ static void end_level_ioapic_vector (unsigned int vector)
 {
 	int irq = vector_to_irq(vector);
 
-	move_irq(vector);
+	move_native_irq(vector);
 	end_level_ioapic_irq(irq);
 }
 

arch/i386/kernel/reboot.c

@@ -111,6 +111,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
 		},
 	},
+	{	/* Handle problems with rebooting on HP nc6120 */
+		.callback = set_bios_reboot,
+		.ident = "HP Compaq nc6120",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6120"),
+		},
+	},
 	{ }
 };
 

arch/ia64/kernel/ia64_ksyms.c

@@ -42,6 +42,7 @@ EXPORT_SYMBOL(clear_page);
 
 #ifdef CONFIG_VIRTUAL_MEM_MAP
 #include <linux/bootmem.h>
+EXPORT_SYMBOL(min_low_pfn);	/* defined by bootmem.c, but not exported by generic code */
 EXPORT_SYMBOL(max_low_pfn);	/* defined by bootmem.c, but not exported by generic code */
 #endif
 

arch/ia64/kernel/kprobes.c

@@ -740,7 +740,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 	switch(val) {
 	case DIE_BREAK:
 		/* err is break number from ia64_bad_break() */
-		if (args->err == 0x80200 || args->err == 0x80300)
+		if (args->err == 0x80200 || args->err == 0x80300 || args->err == 0)
 			if (pre_kprobes_handler(args))
 				ret = NOTIFY_STOP;
 		break;

arch/ia64/kernel/traps.c

@@ -132,24 +132,6 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
 	siginfo_t siginfo;
 	int sig, code;
 
-	/* break.b always sets cr.iim to 0, which causes problems for
-	 * debuggers.  Get the real break number from the original instruction,
-	 * but only for kernel code.  User space break.b is left alone, to
-	 * preserve the existing behaviour.  All break codings have the same
-	 * format, so there is no need to check the slot type.
-	 */
-	if (break_num == 0 && !user_mode(regs)) {
-		struct ia64_psr *ipsr = ia64_psr(regs);
-		unsigned long *bundle = (unsigned long *)regs->cr_iip;
-		unsigned long slot;
-		switch (ipsr->ri) {
-		      case 0:  slot = (bundle[0] >>  5); break;
-		      case 1:  slot = (bundle[0] >> 46) | (bundle[1] << 18); break;
-		      default: slot = (bundle[1] >> 23); break;
-		}
-		break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff);
-	}
-
 	/* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */
 	siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
 	siginfo.si_imm = break_num;

arch/m32r/kernel/io_mappi3.c

@@ -36,12 +36,13 @@ static inline void *_port2addr(unsigned long port)
 	return (void *)(port + NONCACHE_OFFSET);
 }
 
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
 static inline void *__port2addr_ata(unsigned long port)
 {
 	static int	dummy_reg;
 
 	switch (port) {
+	  /* IDE0 CF */
 	case 0x1f0:	return (void *)0xb4002000;
 	case 0x1f1:	return (void *)0xb4012800;
 	case 0x1f2:	return (void *)0xb4012002;
@@ -51,6 +52,17 @@ static inline void *__port2addr_ata(unsigned long port)
 	case 0x1f6:	return (void *)0xb4012006;
 	case 0x1f7:	return (void *)0xb4012806;
 	case 0x3f6:	return (void *)0xb401200e;
+	  /* IDE1 IDE */
+	case 0x170:	return (void *)0xb4810000;  /* Data 16bit */
+	case 0x171:	return (void *)0xb4810002;  /* Features / Error */
+	case 0x172:	return (void *)0xb4810004;  /* Sector count */
+	case 0x173:	return (void *)0xb4810006;  /* Sector number */
+	case 0x174:	return (void *)0xb4810008;  /* Cylinder low */
+	case 0x175:	return (void *)0xb481000a;  /* Cylinder high */
+	case 0x176:	return (void *)0xb481000c;  /* Device head */
+	case 0x177:	return (void *)0xb481000e;  /* Command     */
+	case 0x376:	return (void *)0xb480800c;  /* Device control / Alt status */
+
 	default: 	return (void *)&dummy_reg;
 	}
 }
@@ -108,8 +120,9 @@ unsigned char _inb(unsigned long port)
 {
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		return _ne_inb(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		return *(volatile unsigned char *)__port2addr_ata(port);
 	}
 #endif
@@ -127,8 +140,9 @@ unsigned short _inw(unsigned long port)
 {
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		return _ne_inw(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		return *(volatile unsigned short *)__port2addr_ata(port);
 	}
 #endif
@@ -185,8 +199,9 @@ void _outb(unsigned char b, unsigned long port)
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		_ne_outb(b, PORT2ADDR_NE(port));
 	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		*(volatile unsigned char *)__port2addr_ata(port) = b;
 	} else
 #endif
@@ -203,8 +218,9 @@ void _outw(unsigned short w, unsigned long port)
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		_ne_outw(w, PORT2ADDR_NE(port));
 	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		*(volatile unsigned short *)__port2addr_ata(port) = w;
 	} else
 #endif
@@ -253,8 +269,9 @@ void _insb(unsigned int port, void * addr, unsigned long count)
 {
 	if (port >= LAN_IOSTART && port < LAN_IOEND)
 		_ne_insb(PORT2ADDR_NE(port), addr, count);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		unsigned char *buf = addr;
 		unsigned char *portp = __port2addr_ata(port);
 		while (count--)
@@ -289,8 +306,9 @@ void _insw(unsigned int port, void * addr, unsigned long count)
 		pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
 				count, 1);
 #endif
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	} else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		portp = __port2addr_ata(port);
 		while (count--)
 			*buf++ = *(volatile unsigned short *)portp;
@@ -321,8 +339,9 @@ void _outsb(unsigned int port, const void * addr, unsigned long count)
 		portp = PORT2ADDR_NE(port);
 		while (count--)
 			_ne_outb(*buf++, portp);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	} else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		portp = __port2addr_ata(port);
 		while (count--)
 			*(volatile unsigned char *)portp = *buf++;
@@ -348,8 +367,9 @@ void _outsw(unsigned int port, const void * addr, unsigned long count)
 		portp = PORT2ADDR_NE(port);
 		while (count--)
 			*(volatile unsigned short *)portp = *buf++;
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+#if defined(CONFIG_IDE)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+	} else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) ||
+		  ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){
 		portp = __port2addr_ata(port);
 		while (count--)
 			*(volatile unsigned short *)portp = *buf++;

arch/m32r/kernel/setup_mappi3.c

@@ -151,7 +151,7 @@ void __init init_IRQ(void)
 	disable_mappi3_irq(M32R_IRQ_INT1);
 #endif /* CONFIG_USB */
 
-	/* ICUCR40: CFC IREQ */
+	/* CFC IREQ */
 	irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
 	irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type;
 	irq_desc[PLD_IRQ_CFIREQ].action = 0;
@@ -160,7 +160,7 @@ void __init init_IRQ(void)
 	disable_mappi3_irq(PLD_IRQ_CFIREQ);
 
 #if defined(CONFIG_M32R_CFC)
-	/* ICUCR41: CFC Insert */
+	/* ICUCR41: CFC Insert & eject */
 	irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
 	irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type;
 	irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
@@ -168,14 +168,16 @@ void __init init_IRQ(void)
 	icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
 	disable_mappi3_irq(PLD_IRQ_CFC_INSERT);
 
-	/* ICUCR42: CFC Eject */
-	irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
-	irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type;
-	irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
-	irq_desc[PLD_IRQ_CFC_EJECT].depth = 1;	/* disable nested irq */
-	icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
-	disable_mappi3_irq(PLD_IRQ_CFC_EJECT);
 #endif /* CONFIG_M32R_CFC */
+
+	/* IDE IREQ */
+	irq_desc[PLD_IRQ_IDEIREQ].status = IRQ_DISABLED;
+	irq_desc[PLD_IRQ_IDEIREQ].handler = &mappi3_irq_type;
+	irq_desc[PLD_IRQ_IDEIREQ].action = 0;
+	irq_desc[PLD_IRQ_IDEIREQ].depth = 1;	/* disable nested irq */
+	icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	disable_mappi3_irq(PLD_IRQ_IDEIREQ);
+
 }
 
 #if defined(CONFIG_SMC91X)

arch/m32r/kernel/sys_m32r.c

@@ -41,7 +41,8 @@ asmlinkage int sys_tas(int *addr)
 		return -EFAULT;
 	local_irq_save(flags);
 	oldval = *addr;
-	*addr = 1;
+	if (!oldval)
+		*addr = 1;
 	local_irq_restore(flags);
 	return oldval;
 }
@@ -59,7 +60,8 @@ asmlinkage int sys_tas(int *addr)
 
 	_raw_spin_lock(&tas_lock);
 	oldval = *addr;
-	*addr = 1;
+	if (!oldval)
+		*addr = 1;
 	_raw_spin_unlock(&tas_lock);
 
 	return oldval;

arch/powerpc/kernel/ppc_ksyms.c

@@ -163,15 +163,13 @@ EXPORT_SYMBOL(giveup_altivec);
 EXPORT_SYMBOL(giveup_spe);
 #endif /* CONFIG_SPE */
 
-#ifdef CONFIG_PPC64
+#ifndef CONFIG_PPC64
-EXPORT_SYMBOL(__flush_icache_range);
-#else
 EXPORT_SYMBOL(flush_instruction_cache);
-EXPORT_SYMBOL(flush_icache_range);
 EXPORT_SYMBOL(flush_tlb_kernel_range);
 EXPORT_SYMBOL(flush_tlb_page);
 EXPORT_SYMBOL(_tlbie);
 #endif
+EXPORT_SYMBOL(__flush_icache_range);
 EXPORT_SYMBOL(flush_dcache_range);
 
 #ifdef CONFIG_SMP

arch/powerpc/kernel/process.c

@@ -201,6 +201,28 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
 }
 #endif /* CONFIG_SPE */
 
+/*
+ * If we are doing lazy switching of CPU state (FP, altivec or SPE),
+ * and the current task has some state, discard it.
+ */
+static inline void discard_lazy_cpu_state(void)
+{
+#ifndef CONFIG_SMP
+	preempt_disable();
+	if (last_task_used_math == current)
+		last_task_used_math = NULL;
+#ifdef CONFIG_ALTIVEC
+	if (last_task_used_altivec == current)
+		last_task_used_altivec = NULL;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+	if (last_task_used_spe == current)
+		last_task_used_spe = NULL;
+#endif
+	preempt_enable();
+#endif /* CONFIG_SMP */
+}
+
 int set_dabr(unsigned long dabr)
 {
 	if (ppc_md.set_dabr)
@@ -434,19 +456,7 @@ void show_regs(struct pt_regs * regs)
 void exit_thread(void)
 {
 	kprobe_flush_task(current);
-
+	discard_lazy_cpu_state();
-#ifndef CONFIG_SMP
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-	if (last_task_used_spe == current)
-		last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
 }
 
 void flush_thread(void)
@@ -458,18 +468,7 @@ void flush_thread(void)
 		t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
 #endif
 
-#ifndef CONFIG_SMP
+	discard_lazy_cpu_state();
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-	if (last_task_used_spe == current)
-		last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PPC64	/* for now */
 	if (current->thread.dabr) {
@@ -635,18 +634,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 	}
 #endif
 
-#ifndef CONFIG_SMP
+	discard_lazy_cpu_state();
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif
-#ifdef CONFIG_SPE
-	if (last_task_used_spe == current)
-		last_task_used_spe = NULL;
-#endif
-#endif /* CONFIG_SMP */
 	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
 	current->thread.fpscr.val = 0;
 #ifdef CONFIG_ALTIVEC

arch/powerpc/kernel/prom_init.c

@@ -265,7 +265,7 @@ static int __init call_prom_ret(const char *service, int nargs, int nret,
 	va_end(list);
 
 	for (i = 0; i < nret; i++)
-		rets[nargs+i] = 0;
+		args.args[nargs+i] = 0;
 
 	if (enter_prom(&args, RELOC(prom_entry)) < 0)
 		return PROM_ERROR;

arch/powerpc/kernel/vdso.c

@@ -145,8 +145,7 @@ static void dump_vdso_pages(struct vm_area_struct * vma)
 			struct page *pg = virt_to_page(vdso32_kbase +
 						       i*PAGE_SIZE);
 			struct page *upg = (vma && vma->vm_mm) ?
-				follow_page(vma->vm_mm, vma->vm_start +
+				follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
-					    i*PAGE_SIZE, 0)
 				: NULL;
 			dump_one_vdso_page(pg, upg);
 		}
@@ -157,8 +156,7 @@ static void dump_vdso_pages(struct vm_area_struct * vma)
 			struct page *pg = virt_to_page(vdso64_kbase +
 						       i*PAGE_SIZE);
 			struct page *upg = (vma && vma->vm_mm) ?
-				follow_page(vma->vm_mm, vma->vm_start +
+				follow_page(vma, vma->vm_start + i*PAGE_SIZE, 0)
-					    i*PAGE_SIZE, 0)
 				: NULL;
 			dump_one_vdso_page(pg, upg);
 		}

arch/ppc/kernel/ppc_ksyms.c

@@ -184,7 +184,7 @@ EXPORT_SYMBOL(kernel_thread);
 
 EXPORT_SYMBOL(flush_instruction_cache);
 EXPORT_SYMBOL(giveup_fpu);
-EXPORT_SYMBOL(flush_icache_range);
+EXPORT_SYMBOL(__flush_icache_range);
 EXPORT_SYMBOL(flush_dcache_range);
 EXPORT_SYMBOL(flush_icache_user_range);
 EXPORT_SYMBOL(flush_dcache_page);

arch/ppc/kernel/process.c

@@ -417,6 +417,7 @@ void show_regs(struct pt_regs * regs)
 
 void exit_thread(void)
 {
+	preempt_disable();
 	if (last_task_used_math == current)
 		last_task_used_math = NULL;
 	if (last_task_used_altivec == current)
@@ -425,10 +426,12 @@ void exit_thread(void)
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
 #endif
+	preempt_enable();
 }
 
 void flush_thread(void)
 {
+	preempt_disable();
 	if (last_task_used_math == current)
 		last_task_used_math = NULL;
 	if (last_task_used_altivec == current)
@@ -437,6 +440,7 @@ void flush_thread(void)
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
 #endif
+	preempt_enable();
 }
 
 void
@@ -535,6 +539,7 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp)
 	regs->nip = nip;
 	regs->gpr[1] = sp;
 	regs->msr = MSR_USER;
+	preempt_disable();
 	if (last_task_used_math == current)
 		last_task_used_math = NULL;
 	if (last_task_used_altivec == current)
@@ -543,6 +548,7 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp)
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
 #endif
+	preempt_enable();
 	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
 	current->thread.fpscr.val = 0;
 #ifdef CONFIG_ALTIVEC

arch/sparc/mm/generic.c

@@ -32,9 +32,7 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigne
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
-		pte_t oldpage = *pte;
+		set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
-		pte_clear(mm, address, pte);
-		set_pte(pte, mk_pte_io(offset, prot, space));
 		address += PAGE_SIZE;
 		offset += PAGE_SIZE;
 		pte++;
@@ -63,7 +61,7 @@ static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned
 }
 
 int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-			unsigned long pfn, unsigned long size, pgprot_t prot)
+		       unsigned long pfn, unsigned long size, pgprot_t prot)
 {
 	int error = 0;
 	pgd_t * dir;
@@ -74,7 +72,9 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
 
 	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+	vma->vm_pgoff = (offset >> PAGE_SHIFT) |
+		((unsigned long)space << 28UL);
 
 	prot = __pgprot(pg_iobits);
 	offset -= from;

arch/sparc64/mm/generic.c

@@ -15,6 +15,15 @@
 #include <asm/page.h>
 #include <asm/tlbflush.h>
 
+static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space)
+{
+	pte_t pte;
+	pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) &
+			~(unsigned long)_PAGE_CACHE);
+	pte_val(pte) |= (((unsigned long)space) << 32);
+	return pte;
+}
+
 /* Remap IO memory, the same way as remap_pfn_range(), but use
  * the obio memory space.
  *
@@ -68,6 +77,7 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte,
 			BUG_ON(!pte_none(*pte));
 			set_pte_at(mm, address, pte, entry);
 			address += PAGE_SIZE;
+			pte_val(entry) += PAGE_SIZE;
 			pte++;
 		} while (address < curend);
 	} while (address < end);
@@ -126,9 +136,13 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	struct mm_struct *mm = vma->vm_mm;
 	int space = GET_IOSPACE(pfn);
 	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+	unsigned long phys_base;
+
+	phys_base = offset | (((unsigned long) space) << 32UL);
 
 	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_UNPAGED;
+	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+	vma->vm_pgoff = phys_base >> PAGE_SHIFT;
 
 	prot = __pgprot(pg_iobits);
 	offset -= from;

drivers/atm/Kconfig

@@ -5,6 +5,13 @@
 menu "ATM drivers"
 	depends on NETDEVICES && ATM
 
+config ATM_DUMMY
+	tristate "Dummy ATM driver"
+	depends on ATM
+	help
+	  Dummy ATM driver. Useful for proxy signalling, testing,
+	  and development.  If unsure, say N.
+
 config ATM_TCP
 	tristate "ATM over TCP"
 	depends on INET && ATM

drivers/atm/Makefile

@@ -31,6 +31,7 @@ ifeq ($(CONFIG_ATM_IDT77252_USE_SUNI),y)
   obj-$(CONFIG_ATM_IDT77252)	+= suni.o
 endif
 
+obj-$(CONFIG_ATM_DUMMY)		+= adummy.o
 obj-$(CONFIG_ATM_TCP)		+= atmtcp.o
 obj-$(CONFIG_ATM_FIRESTREAM)	+= firestream.o
 obj-$(CONFIG_ATM_LANAI)		+= lanai.o

drivers/atm/adummy.c

@@ -0,0 +1,168 @@
+/*
+ * adummy.c: a dummy ATM driver
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#include <linux/atmdev.h>
+#include <linux/atm.h>
+#include <linux/sonet.h>
+
+/* version definition */
+
+#define DRV_VERSION "1.0"
+
+#define DEV_LABEL "adummy"
+
+#define ADUMMY_DEV(dev) ((struct adummy_dev *) (dev)->dev_data)
+
+struct adummy_dev {
+	struct atm_dev *atm_dev;
+
+	struct list_head entry;
+};
+
+/* globals */
+
+static LIST_HEAD(adummy_devs);
+
+static int __init
+adummy_start(struct atm_dev *dev)
+{
+	dev->ci_range.vpi_bits = 4;
+	dev->ci_range.vci_bits = 12;
+
+	return 0;
+}
+
+static int
+adummy_open(struct atm_vcc *vcc)
+{
+	short vpi = vcc->vpi;
+	int vci = vcc->vci;
+
+	if (vci == ATM_VCI_UNSPEC || vpi == ATM_VPI_UNSPEC)
+		return 0;
+
+	set_bit(ATM_VF_ADDR, &vcc->flags);
+	set_bit(ATM_VF_READY, &vcc->flags);
+
+	return 0;
+}
+
+static void
+adummy_close(struct atm_vcc *vcc)
+{
+	clear_bit(ATM_VF_READY, &vcc->flags);
+	clear_bit(ATM_VF_ADDR, &vcc->flags);
+}
+
+static int
+adummy_send(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+	if (vcc->pop)
+		vcc->pop(vcc, skb);
+	else
+		dev_kfree_skb_any(skb);
+	atomic_inc(&vcc->stats->tx);
+
+	return 0;
+}
+
+static int
+adummy_proc_read(struct atm_dev *dev, loff_t *pos, char *page)
+{
+	int left = *pos;
+
+	if (!left--)
+		return sprintf(page, "version %s\n", DRV_VERSION);
+
+	return 0;
+}
+
+static struct atmdev_ops adummy_ops =
+{
+	.open =		adummy_open,
+	.close =	adummy_close,	
+	.send =		adummy_send,
+	.proc_read =	adummy_proc_read,
+	.owner =	THIS_MODULE
+};
+
+static int __init adummy_init(void)
+{
+	struct atm_dev *atm_dev;
+	struct adummy_dev *adummy_dev;
+	int err = 0;
+
+	printk(KERN_ERR "adummy: version %s\n", DRV_VERSION);
+
+	adummy_dev = (struct adummy_dev *) kmalloc(sizeof(struct adummy_dev),
+						   GFP_KERNEL);
+	if (!adummy_dev) {
+		printk(KERN_ERR DEV_LABEL ": kmalloc() failed\n");
+		err = -ENOMEM;
+		goto out;
+	}
+	memset(adummy_dev, 0, sizeof(struct adummy_dev));
+
+	atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, 0);
+	if (!atm_dev) {
+		printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
+		err = -ENODEV;
+		goto out_kfree;
+	}
+
+	adummy_dev->atm_dev = atm_dev;
+	atm_dev->dev_data = adummy_dev;
+
+	if (adummy_start(atm_dev)) {
+		printk(KERN_ERR DEV_LABEL ": adummy_start() failed\n");
+		err = -ENODEV;
+		goto out_unregister;
+	}
+
+	list_add(&adummy_dev->entry, &adummy_devs);
+out:
+	return err;
+
+out_unregister:
+	atm_dev_deregister(atm_dev);
+out_kfree:
+	kfree(adummy_dev);
+	goto out;
+}
+
+static void __exit adummy_cleanup(void)
+{
+	struct adummy_dev *adummy_dev, *next;
+
+	list_for_each_entry_safe(adummy_dev, next, &adummy_devs, entry) {
+		atm_dev_deregister(adummy_dev->atm_dev);
+		kfree(adummy_dev);
+	}
+}
+
+module_init(adummy_init);
+module_exit(adummy_cleanup);
+
+MODULE_AUTHOR("chas williams <chas@cmf.nrl.navy.mil>");
+MODULE_DESCRIPTION("dummy ATM driver");
+MODULE_LICENSE("GPL");

drivers/atm/atmdev_init.c

@@ -1,54 +0,0 @@
-/* drivers/atm/atmdev_init.c - ATM device driver initialization */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#include <linux/config.h>
-#include <linux/init.h>
-
-
-#ifdef CONFIG_ATM_ZATM
-extern int zatm_detect(void);
-#endif
-#ifdef CONFIG_ATM_AMBASSADOR
-extern int amb_detect(void);
-#endif
-#ifdef CONFIG_ATM_HORIZON
-extern int hrz_detect(void);
-#endif
-#ifdef CONFIG_ATM_FORE200E
-extern int fore200e_detect(void);
-#endif
-#ifdef CONFIG_ATM_LANAI
-extern int lanai_detect(void);
-#endif
-
-
-/*
- * For historical reasons, atmdev_init returns the number of devices found.
- * Note that some detections may not go via atmdev_init (e.g. eni.c), so this
- * number is meaningless.
- */
-
-int __init atmdev_init(void)
-{
-	int devs;
-
-	devs = 0;
-#ifdef CONFIG_ATM_ZATM
-	devs += zatm_detect();
-#endif
-#ifdef CONFIG_ATM_AMBASSADOR
-	devs += amb_detect();
-#endif
-#ifdef CONFIG_ATM_HORIZON
-	devs += hrz_detect();
-#endif
-#ifdef CONFIG_ATM_FORE200E
-	devs += fore200e_detect();
-#endif
-#ifdef CONFIG_ATM_LANAI
-	devs += lanai_detect();
-#endif
-	return devs;
-}

drivers/atm/atmtcp.c

@@ -246,10 +246,6 @@ static void atmtcp_c_close(struct atm_vcc *vcc)
 {
 	struct atm_dev *atmtcp_dev;
 	struct atmtcp_dev_data *dev_data;
-	struct sock *s;
-	struct hlist_node *node;
-	struct atm_vcc *walk;
-	int i;
 
 	atmtcp_dev = (struct atm_dev *) vcc->dev_data;
 	dev_data = PRIV(atmtcp_dev);
@@ -257,20 +253,8 @@ static void atmtcp_c_close(struct atm_vcc *vcc)
 	if (dev_data->persist) return;
 	atmtcp_dev->dev_data = NULL;
 	kfree(dev_data);
-	shutdown_atm_dev(atmtcp_dev);
+	atm_dev_deregister(atmtcp_dev);
 	vcc->dev_data = NULL;
-	read_lock(&vcc_sklist_lock);
-	for(i = 0; i < VCC_HTABLE_SIZE; ++i) {
-		struct hlist_head *head = &vcc_hash[i];
-
-		sk_for_each(s, node, head) {
-			walk = atm_sk(s);
-			if (walk->dev != atmtcp_dev)
-				continue;
-			wake_up(s->sk_sleep);
-		}
-	}
-	read_unlock(&vcc_sklist_lock);
 	module_put(THIS_MODULE);
 }
 
@@ -450,7 +434,7 @@ static int atmtcp_remove_persistent(int itf)
 	if (PRIV(dev)->vcc) return 0;
 	kfree(dev_data);
 	atm_dev_put(dev);
-	shutdown_atm_dev(dev);
+	atm_dev_deregister(dev);
 	return 0;
 }
 

drivers/atm/lanai.c

@@ -39,7 +39,7 @@
  * o  lanai_change_qos() isn't written yet
  *
  * o  There aren't any ioctl's yet -- I'd like to eventually support
- *    setting loopback and LED modes that way.  (see lanai_ioctl)
+ *    setting loopback and LED modes that way.
  *
  * o  If the segmentation engine or DMA gets shut down we should restart
  *    card as per section 17.0i.  (see lanai_reset)
@@ -305,7 +305,7 @@ struct lanai_dev {
  * vci with their bit set
  */
 static void vci_bitfield_iterate(struct lanai_dev *lanai,
-	/*const*/ unsigned long *lp,
+	const unsigned long *lp,
 	void (*func)(struct lanai_dev *,vci_t vci))
 {
 	vci_t vci = find_first_bit(lp, NUM_VCI);
@@ -951,7 +951,7 @@ static int __devinit eeprom_read(struct lanai_dev *lanai)
 /* read a big-endian 4-byte value out of eeprom */
 static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address)
 {
-	return be32_to_cpup((u32 *) (&lanai->eeprom[address]));
+	return be32_to_cpup((const u32 *) &lanai->eeprom[address]);
 }
 
 /* Checksum/validate EEPROM contents */
@@ -1160,7 +1160,7 @@ static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr)
 }
 
 /* test if VCC is currently backlogged */
-static inline int vcc_is_backlogged(/*const*/ struct lanai_vcc *lvcc)
+static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc)
 {
 	return !skb_queue_empty(&lvcc->tx.backlog);
 }
@@ -1395,7 +1395,8 @@ static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr)
 {
 	int size;
 	struct sk_buff *skb;
-	/*const*/ u32 *x, *end = &lvcc->rx.buf.start[endptr * 4];
+	const u32 *x;
+	u32 *end = &lvcc->rx.buf.start[endptr * 4];
 	int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr);
 	if (n < 0)
 		n += lanai_buf_size(&lvcc->rx.buf);
@@ -2111,7 +2112,7 @@ static int lanai_normalize_ci(struct lanai_dev *lanai,
  * shifted by that much as we compute
  *
  */
-static int pcr_to_cbricg(/*const*/ struct atm_qos *qos)
+static int pcr_to_cbricg(const struct atm_qos *qos)
 {
 	int rounddown = 0;	/* 1 = Round PCR down, i.e. round ICG _up_ */
 	int x, icg, pcr = atm_pcr_goal(&qos->txtp);
@@ -2434,93 +2435,6 @@ static int lanai_open(struct atm_vcc *atmvcc)
 	return result;
 }
 
-#if 0
-/* ioctl operations for card */
-/* NOTE: these are all DEBUGGING ONLY currently */
-static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg)
-{
-	int result = 0;
-	struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
-	switch(cmd) {
-		case 2106275:
-			shutdown_atm_dev(atmdev);
-			return 0;
-		case 2200000: {
-			unsigned long flags;
-			spin_lock_irqsave(&lanai->servicelock, flags);
-			run_service(lanai);
-			spin_unlock_irqrestore(&lanai->servicelock, flags);
-			return 0; }
-		case 2200002:
-			get_statistics(lanai);
-			return 0;
-		case 2200003: {
-			unsigned int i;
-			for (i = 0; i <= 0x5C ; i += 4) {
-				if (i==0x48) /* Write-only butt reg */
-					continue;
-				printk(KERN_CRIT DEV_LABEL "  0x%02X: "
-				    "0x%08X\n", i,
-				    (unsigned int) readl(lanai->base + i));
-				barrier(); mb();
-				pcistatus_check(lanai, 0);
-				barrier(); mb();
-			}
-			return 0; }
-		case 2200004: {
-			u8 b;
-			u16 w;
-			u32 dw;
-			struct pci_dev *pci = lanai->pci;
-			(void) pci_read_config_word(pci, PCI_VENDOR_ID, &w);
-			DPRINTK("vendor = 0x%X\n", (unsigned int) w);
-			(void) pci_read_config_word(pci, PCI_DEVICE_ID, &w);
-			DPRINTK("device = 0x%X\n", (unsigned int) w);
-			(void) pci_read_config_word(pci, PCI_COMMAND, &w);
-			DPRINTK("command = 0x%X\n", (unsigned int) w);
-			(void) pci_read_config_word(pci, PCI_STATUS, &w);
-			DPRINTK("status = 0x%X\n", (unsigned int) w);
-			(void) pci_read_config_dword(pci,
-			    PCI_CLASS_REVISION, &dw);
-			DPRINTK("class/revision = 0x%X\n", (unsigned int) dw);
-			(void) pci_read_config_byte(pci,
-			    PCI_CACHE_LINE_SIZE, &b);
-			DPRINTK("cache line size = 0x%X\n", (unsigned int) b);
-			(void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b);
-			DPRINTK("latency = %d (0x%X)\n",
-			    (int) b, (unsigned int) b);
-			(void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b);
-			DPRINTK("header type = 0x%X\n", (unsigned int) b);
-			(void) pci_read_config_byte(pci, PCI_BIST, &b);
-			DPRINTK("bist = 0x%X\n", (unsigned int) b);
-			/* skipping a few here */
-			(void) pci_read_config_byte(pci,
-			    PCI_INTERRUPT_LINE, &b);
-			DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b);
-			(void) pci_read_config_byte(pci,
-			    PCI_INTERRUPT_PIN, &b);
-			DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b);
-			(void) pci_read_config_byte(pci, PCI_MIN_GNT, &b);
-			DPRINTK("min_gnt = 0x%X\n", (unsigned int) b);
-			(void) pci_read_config_byte(pci, PCI_MAX_LAT, &b);
-			DPRINTK("max_lat = 0x%X\n", (unsigned int) b); }
-			return 0;
-#ifdef USE_POWERDOWN
-		case 2200005:
-			DPRINTK("Coming out of powerdown\n");
-			lanai->conf1 &= ~CONFIG1_POWERDOWN;
-			conf1_write(lanai);
-			return 0;
-#endif
-		default:
-			result = -ENOIOCTLCMD;
-	}
-	return result;
-}
-#else /* !0 */
-#define lanai_ioctl NULL
-#endif /* 0 */
-
 static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
 {
 	struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
@@ -2678,7 +2592,6 @@ static const struct atmdev_ops ops = {
 	.dev_close	= lanai_dev_close,
 	.open		= lanai_open,
 	.close		= lanai_close,
-	.ioctl		= lanai_ioctl,
 	.getsockopt	= NULL,
 	.setsockopt	= NULL,
 	.send		= lanai_send,
@@ -2760,6 +2673,7 @@ static void __exit lanai_module_exit(void)
 	 * gone, so there isn't much to do
 	 */
 	DPRINTK("cleanup_module()\n");
+	pci_unregister_driver(&lanai_driver);
 }
 
 module_init(lanai_module_init);

drivers/char/mem.c

@@ -591,7 +591,7 @@ static inline size_t read_zero_pagealigned(char __user * buf, size_t size)
 
 		if (vma->vm_start > addr || (vma->vm_flags & VM_WRITE) == 0)
 			goto out_up;
-		if (vma->vm_flags & (VM_SHARED | VM_HUGETLB | VM_UNPAGED))
+		if (vma->vm_flags & (VM_SHARED | VM_HUGETLB))
 			break;
 		count = vma->vm_end - addr;
 		if (count > size)

drivers/cpufreq/cpufreq.c

@@ -1113,21 +1113,13 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 {
 	int retval = -EINVAL;
 
-	/*
+	lock_cpu_hotplug();
-	 * If we are already in context of hotplug thread, we dont need to
-	 * acquire the hotplug lock. Otherwise acquire cpucontrol to prevent
-	 * hotplug from removing this cpu that we are working on.
-	 */
-	if (!current_in_cpu_hotplug())
-		lock_cpu_hotplug();
-
 	dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
 		target_freq, relation);
 	if (cpu_online(policy->cpu) && cpufreq_driver->target)
 		retval = cpufreq_driver->target(policy, target_freq, relation);
 
-	if (!current_in_cpu_hotplug())
+	unlock_cpu_hotplug();
-		unlock_cpu_hotplug();
 
 	return retval;
 }

drivers/md/md.c

@@ -1028,7 +1028,6 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->size = le64_to_cpu(sb->size)/2;
 		mddev->events = le64_to_cpu(sb->events);
 		mddev->bitmap_offset = 0;
-		mddev->default_bitmap_offset = 0;
 		mddev->default_bitmap_offset = 1024;
 		
 		mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
@@ -2932,6 +2931,9 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
 
 	mddev->sb_dirty      = 1;
 
+	mddev->default_bitmap_offset = MD_SB_BYTES >> 9;
+	mddev->bitmap_offset = 0;
+
 	/*
 	 * Generate a 128 bit UUID
 	 */

drivers/md/raid1.c

@@ -953,9 +953,6 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 	int mirror = 0;
 	mirror_info_t *p;
 
-	if (rdev->saved_raid_disk >= 0 &&
-	    conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
-		mirror = rdev->saved_raid_disk;
 	for (mirror=0; mirror < mddev->raid_disks; mirror++)
 		if ( !(p=conf->mirrors+mirror)->rdev) {
 
@@ -972,7 +969,10 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 			p->head_position = 0;
 			rdev->raid_disk = mirror;
 			found = 1;
-			if (rdev->saved_raid_disk != mirror)
+			/* As all devices are equivalent, we don't need a full recovery
+			 * if this was recently any drive of the array
+			 */
+			if (rdev->saved_raid_disk < 0)
 				conf->fullsync = 1;
 			rcu_assign_pointer(p->rdev, rdev);
 			break;

drivers/md/raid10.c

@@ -552,7 +552,11 @@ static int read_balance(conf_t *conf, r10bio_t *r10_bio)
 		    !test_bit(In_sync, &rdev->flags))
 			continue;
 
-		if (!atomic_read(&rdev->nr_pending)) {
+		/* This optimisation is debatable, and completely destroys
+		 * sequential read speed for 'far copies' arrays.  So only
+		 * keep it for 'near' arrays, and review those later.
+		 */
+		if (conf->near_copies > 1 && !atomic_read(&rdev->nr_pending)) {
 			disk = ndisk;
 			slot = nslot;
 			break;

drivers/md/raid5.c

@@ -1704,7 +1704,9 @@ static void raid5d (mddev_t *mddev)
 
 		if (conf->seq_flush - conf->seq_write > 0) {
 			int seq = conf->seq_flush;
+			spin_unlock_irq(&conf->device_lock);
 			bitmap_unplug(mddev->bitmap);
+			spin_lock_irq(&conf->device_lock);
 			conf->seq_write = seq;
 			activate_bit_delay(conf);
 		}

drivers/md/raid6main.c

@@ -1702,6 +1702,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 	int data_disks = raid_disks - 2;
 	sector_t max_sector = mddev->size << 1;
 	int sync_blocks;
+	int still_degraded = 0;
+	int i;
 
 	if (sector_nr >= max_sector) {
 		/* just being told to finish up .. nothing much to do */
@@ -1710,7 +1712,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 		if (mddev->curr_resync < max_sector) /* aborted */
 			bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
 					&sync_blocks, 1);
-		else /* compelted sync */
+		else /* completed sync */
 			conf->fullsync = 0;
 		bitmap_close_sync(mddev->bitmap);
 
@@ -1748,7 +1750,16 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 		 */
 		schedule_timeout_uninterruptible(1);
 	}
-	bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 0);
+	/* Need to check if array will still be degraded after recovery/resync
+	 * We don't need to check the 'failed' flag as when that gets set,
+	 * recovery aborts.
+	 */
+	for (i=0; i<mddev->raid_disks; i++)
+		if (conf->disks[i].rdev == NULL)
+			still_degraded = 1;
+
+	bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, still_degraded);
+
 	spin_lock(&sh->lock);
 	set_bit(STRIPE_SYNCING, &sh->state);
 	clear_bit(STRIPE_INSYNC, &sh->state);
@@ -1784,7 +1795,9 @@ static void raid6d (mddev_t *mddev)
 
 		if (conf->seq_flush - conf->seq_write > 0) {
 			int seq = conf->seq_flush;
+			spin_unlock_irq(&conf->device_lock);
 			bitmap_unplug(mddev->bitmap);
+			spin_lock_irq(&conf->device_lock);
 			conf->seq_write = seq;
 			activate_bit_delay(conf);
 		}
@@ -2145,9 +2158,15 @@ static int raid6_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
 		/* no point adding a device */
 		return 0;
 	/*
-	 * find the disk ...
+	 * find the disk ... but prefer rdev->saved_raid_disk
+	 * if possible.
 	 */
-	for (disk=0; disk < mddev->raid_disks; disk++)
+	if (rdev->saved_raid_disk >= 0 &&
+	    conf->disks[rdev->saved_raid_disk].rdev == NULL)
+		disk = rdev->saved_raid_disk;
+	else
+		disk = 0;
+	for ( ; disk < mddev->raid_disks; disk++)
 		if ((p=conf->disks + disk)->rdev == NULL) {
 			clear_bit(In_sync, &rdev->flags);
 			rdev->raid_disk = disk;

drivers/media/video/Kconfig

@@ -26,7 +26,7 @@ config VIDEO_BT848
 	  module will be called bttv.
 
 config VIDEO_BT848_DVB
-	tristate "DVB/ATSC Support for bt878 based TV cards"
+	bool "DVB/ATSC Support for bt878 based TV cards"
 	depends on VIDEO_BT848 && DVB_CORE
 	select DVB_BT8XX
 	---help---

drivers/media/video/cx88/Kconfig

@@ -46,8 +46,8 @@ config VIDEO_CX88_DVB_ALL_FRONTENDS
 	  If you are unsure, choose Y.
 
 config VIDEO_CX88_DVB_MT352
-	tristate "Zarlink MT352 DVB-T Support"
+	bool "Zarlink MT352 DVB-T Support"
-	default m
+	default y
 	depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
 	select DVB_MT352
 	---help---
@@ -55,8 +55,8 @@ config VIDEO_CX88_DVB_MT352
 	  Connexant 2388x chip and the MT352 demodulator.
 
 config VIDEO_CX88_DVB_OR51132
-	tristate "OR51132 ATSC Support"
+	bool "OR51132 ATSC Support"
-	default m
+	default y
 	depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
 	select DVB_OR51132
 	---help---
@@ -64,8 +64,8 @@ config VIDEO_CX88_DVB_OR51132
 	  Connexant 2388x chip and the OR51132 demodulator.
 
 config VIDEO_CX88_DVB_CX22702
-	tristate "Conexant CX22702 DVB-T Support"
+	bool "Conexant CX22702 DVB-T Support"
-	default m
+	default y
 	depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
 	select DVB_CX22702
 	---help---
@@ -73,8 +73,8 @@ config VIDEO_CX88_DVB_CX22702
 	  Connexant 2388x chip and the CX22702 demodulator.
 
 config VIDEO_CX88_DVB_LGDT330X
-	tristate "LG Electronics DT3302/DT3303 ATSC Support"
+	bool "LG Electronics DT3302/DT3303 ATSC Support"
-	default m
+	default y
 	depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
 	select DVB_LGDT330X
 	---help---
@@ -82,8 +82,8 @@ config VIDEO_CX88_DVB_LGDT330X
 	  Connexant 2388x chip and the LGDT3302/LGDT3303 demodulator.
 
 config VIDEO_CX88_DVB_NXT200X
-	tristate "NXT2002/NXT2004 ATSC Support"
+	bool "NXT2002/NXT2004 ATSC Support"
-	default m
+	default y
 	depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
 	select DVB_NXT200X
 	---help---

drivers/media/video/cx88/Makefile

@@ -9,21 +9,12 @@ obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o
 EXTRA_CFLAGS += -I$(src)/..
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
-ifneq ($(CONFIG_VIDEO_BUF_DVB),n)
+
- EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1
+extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
-endif
+extra-cflags-$(CONFIG_DVB_CX22702)   += -DHAVE_CX22702=1
-ifneq ($(CONFIG_DVB_CX22702),n)
+extra-cflags-$(CONFIG_DVB_OR51132)   += -DHAVE_OR51132=1
- EXTRA_CFLAGS += -DHAVE_CX22702=1
+extra-cflags-$(CONFIG_DVB_LGDT330X)  += -DHAVE_LGDT330X=1
-endif
+extra-cflags-$(CONFIG_DVB_MT352)     += -DHAVE_MT352=1
-ifneq ($(CONFIG_DVB_OR51132),n)
+extra-cflags-$(CONFIG_DVB_NXT200X)   += -DHAVE_NXT200X=1
- EXTRA_CFLAGS += -DHAVE_OR51132=1
+
-endif
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
-ifneq ($(CONFIG_DVB_LGDT330X),n)
- EXTRA_CFLAGS += -DHAVE_LGDT330X=1
-endif
-ifneq ($(CONFIG_DVB_MT352),n)
- EXTRA_CFLAGS += -DHAVE_MT352=1
-endif
-ifneq ($(CONFIG_DVB_NXT200X),n)
- EXTRA_CFLAGS += -DHAVE_NXT200X=1
-endif

drivers/media/video/saa7134/Kconfig

@@ -42,8 +42,8 @@ config VIDEO_SAA7134_DVB_ALL_FRONTENDS
 	  If you are unsure, choose Y.
 
 config VIDEO_SAA7134_DVB_MT352
-	tristate "Zarlink MT352 DVB-T Support"
+	bool "Zarlink MT352 DVB-T Support"
-	default m
+	default y
 	depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
 	select DVB_MT352
 	---help---
@@ -51,8 +51,8 @@ config VIDEO_SAA7134_DVB_MT352
 	  Philips saa7134 chip and the MT352 demodulator.
 
 config VIDEO_SAA7134_DVB_TDA1004X
-	tristate "Phillips TDA10045H/TDA10046H DVB-T Support"
+	bool "Phillips TDA10045H/TDA10046H DVB-T Support"
-	default m
+	default y
 	depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
 	select DVB_TDA1004X
 	---help---
@@ -60,8 +60,8 @@ config VIDEO_SAA7134_DVB_TDA1004X
 	  Philips saa7134 chip and the TDA10045H/TDA10046H demodulator.
 
 config VIDEO_SAA7134_DVB_NXT200X
-	tristate "NXT2002/NXT2004 ATSC Support"
+	bool "NXT2002/NXT2004 ATSC Support"
-	default m
+	default y
 	depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
 	select DVB_NXT200X
 	---help---

drivers/media/video/saa7134/Makefile

@@ -11,15 +11,10 @@ obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o
 EXTRA_CFLAGS += -I$(src)/..
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
-ifneq ($(CONFIG_VIDEO_BUF_DVB),n)
+
- EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1
+extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
-endif
+extra-cflags-$(CONFIG_DVB_MT352)     += -DHAVE_MT352=1
-ifneq ($(CONFIG_DVB_MT352),n)
+extra-cflags-$(CONFIG_DVB_TDA1004X)  += -DHAVE_TDA1004X=1
- EXTRA_CFLAGS += -DHAVE_MT352=1
+extra-cflags-$(CONFIG_DVB_NXT200X)   += -DHAVE_NXT200X=1
-endif
+
-ifneq ($(CONFIG_DVB_TDA1004X),n)
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
- EXTRA_CFLAGS += -DHAVE_TDA1004X=1
-endif
-ifneq ($(CONFIG_DVB_NXT200X),n)
- EXTRA_CFLAGS += -DHAVE_NXT200X=1
-endif

drivers/message/fusion/mptbase.c

@@ -91,9 +91,9 @@ static int mfcounter = 0;
  *  Public data...
  */
 int mpt_lan_index = -1;
-static int mpt_stm_index = -1;
+int mpt_stm_index = -1;
 
-static struct proc_dir_entry *mpt_proc_root_dir;
+struct proc_dir_entry *mpt_proc_root_dir;
 
 #define WHOINIT_UNKNOWN		0xAA
 
@@ -6271,6 +6271,7 @@ EXPORT_SYMBOL(mpt_resume);
 EXPORT_SYMBOL(mpt_suspend);
 #endif
 EXPORT_SYMBOL(ioc_list);
+EXPORT_SYMBOL(mpt_proc_root_dir);
 EXPORT_SYMBOL(mpt_register);
 EXPORT_SYMBOL(mpt_deregister);
 EXPORT_SYMBOL(mpt_event_register);
@@ -6288,6 +6289,7 @@ EXPORT_SYMBOL(mpt_verify_adapter);
 EXPORT_SYMBOL(mpt_GetIocState);
 EXPORT_SYMBOL(mpt_print_ioc_summary);
 EXPORT_SYMBOL(mpt_lan_index);
+EXPORT_SYMBOL(mpt_stm_index);
 EXPORT_SYMBOL(mpt_HardResetHandler);
 EXPORT_SYMBOL(mpt_config);
 EXPORT_SYMBOL(mpt_toolbox);

drivers/message/fusion/mptbase.h

@@ -1006,8 +1006,10 @@ extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
  *  Public data decl's...
  */
 extern struct list_head	  ioc_list;
+extern struct proc_dir_entry	*mpt_proc_root_dir;
 
 extern int		  mpt_lan_index;	/* needed by mptlan.c */
+extern int		  mpt_stm_index;	/* needed by mptstm.c */
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif		/* } __KERNEL__ */

drivers/mmc/mmc.c

@@ -816,7 +816,7 @@ static void mmc_discover_cards(struct mmc_host *host)
 
 			cmd.opcode = SD_SEND_RELATIVE_ADDR;
 			cmd.arg = 0;
-			cmd.flags = MMC_RSP_R1;
+			cmd.flags = MMC_RSP_R6;
 
 			err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
 			if (err != MMC_ERR_NONE)

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -4,7 +4,7 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0001.c,v 1.185 2005/11/07 11:14:22 gleixner Exp $
+ * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $
  *
  *
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
@@ -644,9 +644,8 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		 *
 		 * - contension arbitration is handled in the owner's context.
 		 *
-		 * The 'shared' struct can be read when its lock is taken.
+		 * The 'shared' struct can be read and/or written only when
-		 * However any writes to it can only be made when the current
+		 * its lock is taken.
-		 * owner's lock is also held.
 		 */
 		struct flchip_shared *shared = chip->priv;
 		struct flchip *contender;
@@ -675,14 +674,13 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 			}
 			timeo = jiffies + HZ;
 			spin_lock(&shared->lock);
+			spin_unlock(contender->mutex);
 		}
 
 		/* We now own it */
 		shared->writing = chip;
 		if (mode == FL_ERASING)
 			shared->erasing = chip;
-		if (contender && contender != chip)
-			spin_unlock(contender->mutex);
 		spin_unlock(&shared->lock);
 	}
 

drivers/mtd/chips/cfi_probe.c

@@ -1,7 +1,7 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: cfi_probe.c,v 1.84 2005/11/07 11:14:23 gleixner Exp $
+   $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
 */
 
 #include <linux/config.h>
@@ -230,8 +230,8 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 	cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
-	cfi->mfr = cfi_read_query(map, base);
+	cfi->mfr = cfi_read_query16(map, base);
-	cfi->id = cfi_read_query(map, base + ofs_factor);
+	cfi->id = cfi_read_query16(map, base + ofs_factor);
 
 	/* Put it back into Read Mode */
 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
@@ -426,7 +426,7 @@ static struct mtd_chip_driver cfi_chipdrv = {
 	.module		= THIS_MODULE
 };
 
-int __init cfi_probe_init(void)
+static int __init cfi_probe_init(void)
 {
 	register_mtd_chip_driver(&cfi_chipdrv);
 	return 0;

drivers/mtd/chips/sharp.c

@@ -4,7 +4,7 @@
  * Copyright 2000,2001 David A. Schleef <ds@schleef.org>
  *           2000,2001 Lineo, Inc.
  *
- * $Id: sharp.c,v 1.16 2005/11/07 11:14:23 gleixner Exp $
+ * $Id: sharp.c,v 1.17 2005/11/29 14:28:28 gleixner Exp $
  *
  * Devices supported:
  *   LH28F016SCT Symmetrical block flash memory, 2Mx8
@@ -160,22 +160,28 @@ struct mtd_info *sharp_probe(struct map_info *map)
 	return mtd;
 }
 
+static inline void sharp_send_cmd(struct map_info *map, unsigned long cmd, unsigned long adr)
+{
+	map_word map_cmd;
+	map_cmd.x[0] = cmd;
+	map_write(map, map_cmd, adr);
+}
+
 static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
 {
-	unsigned long tmp;
+	map_word tmp, read0, read4;
 	unsigned long base = 0;
-	u32 read0, read4;
 	int width = 4;
 
-	tmp = map_read32(map, base+0);
+	tmp = map_read(map, base+0);
 
-	map_write32(map, CMD_READ_ID, base+0);
+	sharp_send_cmd(map, CMD_READ_ID, base+0);
 
-	read0=map_read32(map, base+0);
+	read0 = map_read(map, base+0);
-	read4=map_read32(map, base+4);
+	read4 = map_read(map, base+4);
-	if(read0 == 0x89898989){
+	if(read0.x[0] == 0x89898989){
 		printk("Looks like sharp flash\n");
-		switch(read4){
+		switch(read4.x[0]){
 		case 0xaaaaaaaa:
 		case 0xa0a0a0a0:
 			/* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/
@@ -197,16 +203,16 @@ static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
 			return width;
 #endif
 		default:
-			printk("Sort-of looks like sharp flash, 0x%08x 0x%08x\n",
+			printk("Sort-of looks like sharp flash, 0x%08lx 0x%08lx\n",
-				read0,read4);
+				read0.x[0], read4.x[0]);
 		}
-	}else if((map_read32(map, base+0) == CMD_READ_ID)){
+	}else if((map_read(map, base+0).x[0] == CMD_READ_ID)){
 		/* RAM, probably */
 		printk("Looks like RAM\n");
-		map_write32(map, tmp, base+0);
+		map_write(map, tmp, base+0);
 	}else{
-		printk("Doesn't look like sharp flash, 0x%08x 0x%08x\n",
+		printk("Doesn't look like sharp flash, 0x%08lx 0x%08lx\n",
-			read0,read4);
+			read0.x[0], read4.x[0]);
 	}
 
 	return 0;
@@ -215,7 +221,8 @@ static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
 /* This function returns with the chip->mutex lock held. */
 static int sharp_wait(struct map_info *map, struct flchip *chip)
 {
-	int status, i;
+	int i;
+	map_word status;
 	unsigned long timeo = jiffies + HZ;
 	DECLARE_WAITQUEUE(wait, current);
 	int adr = 0;
@@ -225,12 +232,12 @@ retry:
 
 	switch(chip->state){
 	case FL_READY:
-		map_write32(map,CMD_READ_STATUS,adr);
+		sharp_send_cmd(map, CMD_READ_STATUS, adr);
 		chip->state = FL_STATUS;
 	case FL_STATUS:
 		for(i=0;i<100;i++){
-			status = map_read32(map,adr);
+			status = map_read(map, adr);
-			if((status & SR_READY)==SR_READY)
+			if((status.x[0] & SR_READY)==SR_READY)
 				break;
 			udelay(1);
 		}
@@ -254,7 +261,7 @@ retry:
 		goto retry;
 	}
 
-	map_write32(map,CMD_RESET, adr);
+	sharp_send_cmd(map, CMD_RESET, adr);
 
 	chip->state = FL_READY;
 
@@ -351,37 +358,39 @@ static int sharp_write_oneword(struct map_info *map, struct flchip *chip,
 	int timeo;
 	int try;
 	int i;
-	int status = 0;
+	map_word data, status;
 
+	status.x[0] = 0;
 	ret = sharp_wait(map,chip);
 
 	for(try=0;try<10;try++){
-		map_write32(map,CMD_BYTE_WRITE,adr);
+		sharp_send_cmd(map, CMD_BYTE_WRITE, adr);
 		/* cpu_to_le32 -> hack to fix the writel be->le conversion */
-		map_write32(map,cpu_to_le32(datum),adr);
+		data.x[0] = cpu_to_le32(datum);
+		map_write(map, data, adr);
 
 		chip->state = FL_WRITING;
 
 		timeo = jiffies + (HZ/2);
 
-		map_write32(map,CMD_READ_STATUS,adr);
+		sharp_send_cmd(map, CMD_READ_STATUS, adr);
 		for(i=0;i<100;i++){
-			status = map_read32(map,adr);
+			status = map_read(map, adr);
-			if((status & SR_READY)==SR_READY)
+			if((status.x[0] & SR_READY) == SR_READY)
 				break;
 		}
 		if(i==100){
 			printk("sharp: timed out writing\n");
 		}
 
-		if(!(status&SR_ERRORS))
+		if(!(status.x[0] & SR_ERRORS))
 			break;
 
-		printk("sharp: error writing byte at addr=%08lx status=%08x\n",adr,status);
+		printk("sharp: error writing byte at addr=%08lx status=%08lx\n", adr, status.x[0]);
 
-		map_write32(map,CMD_CLEAR_STATUS,adr);
+		sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
 	}
-	map_write32(map,CMD_RESET,adr);
+	sharp_send_cmd(map, CMD_RESET, adr);
 	chip->state = FL_READY;
 
 	wake_up(&chip->wq);
@@ -434,18 +443,18 @@ static int sharp_do_wait_for_ready(struct map_info *map, struct flchip *chip,
 {
 	int ret;
 	unsigned long timeo;
-	int status;
+	map_word status;
 	DECLARE_WAITQUEUE(wait, current);
 
-	map_write32(map,CMD_READ_STATUS,adr);
+	sharp_send_cmd(map, CMD_READ_STATUS, adr);
-	status = map_read32(map,adr);
+	status = map_read(map, adr);
 
 	timeo = jiffies + HZ;
 
 	while(time_before(jiffies, timeo)){
-		map_write32(map,CMD_READ_STATUS,adr);
+		sharp_send_cmd(map, CMD_READ_STATUS, adr);
-		status = map_read32(map,adr);
+		status = map_read(map, adr);
-		if((status & SR_READY)==SR_READY){
+		if((status.x[0] & SR_READY)==SR_READY){
 			ret = 0;
 			goto out;
 		}
@@ -476,7 +485,7 @@ static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
 {
 	int ret;
 	//int timeo;
-	int status;
+	map_word status;
 	//int i;
 
 //printk("sharp_erase_oneblock()\n");
@@ -486,26 +495,26 @@ static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
 	sharp_unlock_oneblock(map,chip,adr);
 #endif
 
-	map_write32(map,CMD_BLOCK_ERASE_1,adr);
+	sharp_send_cmd(map, CMD_BLOCK_ERASE_1, adr);
-	map_write32(map,CMD_BLOCK_ERASE_2,adr);
+	sharp_send_cmd(map, CMD_BLOCK_ERASE_2, adr);
 
 	chip->state = FL_ERASING;
 
 	ret = sharp_do_wait_for_ready(map,chip,adr);
 	if(ret<0)return ret;
 
-	map_write32(map,CMD_READ_STATUS,adr);
+	sharp_send_cmd(map, CMD_READ_STATUS, adr);
-	status = map_read32(map,adr);
+	status = map_read(map, adr);
 
-	if(!(status&SR_ERRORS)){
+	if(!(status.x[0] & SR_ERRORS)){
-		map_write32(map,CMD_RESET,adr);
+		sharp_send_cmd(map, CMD_RESET, adr);
 		chip->state = FL_READY;
 		//spin_unlock_bh(chip->mutex);
 		return 0;
 	}
 
-	printk("sharp: error erasing block at addr=%08lx status=%08x\n",adr,status);
+	printk("sharp: error erasing block at addr=%08lx status=%08lx\n", adr, status.x[0]);
-	map_write32(map,CMD_CLEAR_STATUS,adr);
+	sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
 
 	//spin_unlock_bh(chip->mutex);
 
@@ -517,20 +526,20 @@ static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
 	unsigned long adr)
 {
 	int i;
-	int status;
+	map_word status;
 
-	map_write32(map,CMD_CLEAR_BLOCK_LOCKS_1,adr);
+	sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_1, adr);
-	map_write32(map,CMD_CLEAR_BLOCK_LOCKS_2,adr);
+	sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_2, adr);
 
 	udelay(100);
 
-	status = map_read32(map,adr);
+	status = map_read(map, adr);
-	printk("status=%08x\n",status);
+	printk("status=%08lx\n", status.x[0]);
 
 	for(i=0;i<1000;i++){
-		//map_write32(map,CMD_READ_STATUS,adr);
+		//sharp_send_cmd(map, CMD_READ_STATUS, adr);
-		status = map_read32(map,adr);
+		status = map_read(map, adr);
-		if((status & SR_READY)==SR_READY)
+		if((status.x[0] & SR_READY) == SR_READY)
 			break;
 		udelay(100);
 	}
@@ -538,14 +547,14 @@ static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
 		printk("sharp: timed out unlocking block\n");
 	}
 
-	if(!(status&SR_ERRORS)){
+	if(!(status.x[0] & SR_ERRORS)){
-		map_write32(map,CMD_RESET,adr);
+		sharp_send_cmd(map, CMD_RESET, adr);
 		chip->state = FL_READY;
 		return;
 	}
 
-	printk("sharp: error unlocking block at addr=%08lx status=%08x\n",adr,status);
+	printk("sharp: error unlocking block at addr=%08lx status=%08lx\n", adr, status.x[0]);
-	map_write32(map,CMD_CLEAR_STATUS,adr);
+	sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
 }
 #endif
 

drivers/mtd/devices/block2mtd.c

@@ -1,5 +1,5 @@
 /*
- * $Id: block2mtd.c,v 1.29 2005/11/07 11:14:24 gleixner Exp $
+ * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $
  *
  * block2mtd.c - create an mtd from a block device
  *
@@ -19,7 +19,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/buffer_head.h>
 
-#define VERSION "$Revision: 1.29 $"
+#define VERSION "$Revision: 1.30 $"
 
 
 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
@@ -40,7 +40,7 @@ static LIST_HEAD(blkmtd_device_list);
 
 
 #define PAGE_READAHEAD 64
-void cache_readahead(struct address_space *mapping, int index)
+static void cache_readahead(struct address_space *mapping, int index)
 {
 	filler_t *filler = (filler_t*)mapping->a_ops->readpage;
 	int i, pagei;

drivers/mtd/devices/ms02-nv.c

@@ -6,7 +6,7 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  *
- *	$Id: ms02-nv.c,v 1.10 2005/06/20 12:24:41 macro Exp $
+ *	$Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $
  */
 
 #include <linux/init.h>
@@ -293,13 +293,13 @@ static int __init ms02nv_init(void)
 
 	switch (mips_machtype) {
 	case MACH_DS5000_200:
-		csr = (volatile u32 *)KN02_CSR_BASE;
+		csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR);
 		if (*csr & KN02_CSR_BNK32M)
 			stride = 2;
 		break;
 	case MACH_DS5000_2X0:
 	case MACH_DS5900:
-		csr = (volatile u32 *)KN03_MCR_BASE;
+		csr = (volatile u32 *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR);
 		if (*csr & KN03_MCR_BNK32M)
 			stride = 2;
 		break;

drivers/mtd/ftl.c

@@ -1,5 +1,5 @@
 /* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $
+ * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
  *
  * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
@@ -1084,9 +1084,9 @@ struct mtd_blktrans_ops ftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-int init_ftl(void)
+static int init_ftl(void)
 {
-	DEBUG(0, "$Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $\n");
+	DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n");
 
 	return register_mtd_blktrans(&ftl_tr);
 }

drivers/mtd/maps/Kconfig

@@ -538,12 +538,6 @@ config MTD_MPC1211
 	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
 	  If you have such a board, say 'Y'.
 
-config MTD_PQ2FADS
-	tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards"
-	depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT
-	help
-	 This enables access to flash SIMM on PQ2FADS-like boards
-
 config MTD_OMAP_NOR
 	tristate "TI OMAP board mappings"
 	depends on MTD_CFI && ARCH_OMAP

drivers/mtd/maps/Makefile

@@ -70,6 +70,5 @@ obj-$(CONFIG_MTD_DMV182)	+= dmv182.o
 obj-$(CONFIG_MTD_SHARP_SL)	+= sharpsl-flash.o
 obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
-obj-$(CONFIG_MTD_PQ2FADS)	+= pq2fads.o
 obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
 obj-$(CONFIG_MTD_TQM834x)	+= tqm834x.o

drivers/mtd/maps/ixp4xx.c

@@ -1,5 +1,5 @@
 /*
- * $Id: ixp4xx.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
+ * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
  *
  * drivers/mtd/maps/ixp4xx.c
  *
@@ -34,10 +34,55 @@
 
 #include <linux/reboot.h>
 
+/*
+ * Read/write a 16 bit word from flash address 'addr'.
+ *
+ * When the cpu is in little-endian mode it swizzles the address lines
+ * ('address coherency') so we need to undo the swizzling to ensure commands
+ * and the like end up on the correct flash address.
+ *
+ * To further complicate matters, due to the way the expansion bus controller
+ * handles 32 bit reads, the byte stream ABCD is stored on the flash as:
+ *     D15    D0
+ *     +---+---+
+ *     | A | B | 0
+ *     +---+---+
+ *     | C | D | 2
+ *     +---+---+
+ * This means that on LE systems each 16 bit word must be swapped. Note that
+ * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI
+ * data and other flash commands which are always in D7-D0.
+ */
 #ifndef __ARMEB__
+#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP
+#  error CONFIG_MTD_CFI_BE_BYTE_SWAP required
+#endif
+
+static inline u16 flash_read16(void __iomem *addr)
+{
+	return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2)));
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+	__raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2));
+}
+
 #define	BYTE0(h)	((h) & 0xFF)
 #define	BYTE1(h)	(((h) >> 8) & 0xFF)
+
 #else
+
+static inline u16 flash_read16(const void __iomem *addr)
+{
+	return __raw_readw(addr);
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+	__raw_writew(d, addr);
+}
+
 #define	BYTE0(h)	(((h) >> 8) & 0xFF)
 #define	BYTE1(h)	((h) & 0xFF)
 #endif
@@ -45,7 +90,7 @@
 static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
 {
 	map_word val;
-	val.x[0] = le16_to_cpu(readw(map->virt + ofs));
+	val.x[0] = flash_read16(map->virt + ofs);
 	return val;
 }
 
@@ -57,19 +102,28 @@ static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
 static void ixp4xx_copy_from(struct map_info *map, void *to,
 			     unsigned long from, ssize_t len)
 {
-	int i;
 	u8 *dest = (u8 *) to;
 	void __iomem *src = map->virt + from;
-	u16 data;
 
-	for (i = 0; i < (len / 2); i++) {
+	if (len <= 0)
-		data = le16_to_cpu(readw(src + 2*i));
+		return;
-		dest[i * 2] = BYTE0(data);
+
-		dest[i * 2 + 1] = BYTE1(data);
+	if (from & 1) {
+		*dest++ = BYTE1(flash_read16(src));
+                src++;
+		--len;
 	}
 
-	if (len & 1)
+	while (len >= 2) {
-		dest[len - 1] = BYTE0(le16_to_cpu(readw(src + 2*i)));
+		u16 data = flash_read16(src);
+		*dest++ = BYTE0(data);
+		*dest++ = BYTE1(data);
+		src += 2;
+		len -= 2;
+        }
+
+	if (len > 0)
+		*dest++ = BYTE0(flash_read16(src));
 }
 
 /*
@@ -79,7 +133,7 @@ static void ixp4xx_copy_from(struct map_info *map, void *to,
 static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
 {
 	if (!(adr & 1))
-		writew(cpu_to_le16(d.x[0]), map->virt + adr);
+		flash_write16(d.x[0], map->virt + adr);
 }
 
 /*
@@ -87,7 +141,7 @@ static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long
  */
 static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
 {
-	writew(cpu_to_le16(d.x[0]), map->virt + adr);
+	flash_write16(d.x[0], map->virt + adr);
 }
 
 struct ixp4xx_flash_info {

drivers/mtd/maps/nettel.c

@@ -6,7 +6,7 @@
  *      (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
  *      (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
  *
- *	$Id: nettel.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
+ *	$Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $
  */
 
 /****************************************************************************/
@@ -479,7 +479,7 @@ void __exit nettel_cleanup(void)
 	}
 	if (nettel_intel_map.virt) {
 		iounmap(nettel_intel_map.virt);
-		nettel_intel_map.virt = 0;
+		nettel_intel_map.virt = NULL;
 	}
 #endif
 }

drivers/mtd/maps/pci.c

@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  $Id: pci.c,v 1.13 2005/11/07 11:14:27 gleixner Exp $
+ *  $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $
  *
  * Generic PCI memory map driver.  We support the following boards:
  *  - Intel IQ80310 ATU.
@@ -102,7 +102,7 @@ static void mtd_pci_copyto(struct map_info *_map, unsigned long to, const void *
 	memcpy_toio(map->base + map->translate(map, to), from, len);
 }
 
-static struct map_info mtd_pci_map = {
+static const struct map_info mtd_pci_map = {
 	.phys =		NO_XIP,
 	.copy_from =	mtd_pci_copyfrom,
 	.copy_to =	mtd_pci_copyto,

drivers/mtd/maps/physmap.c

@@ -1,5 +1,5 @@
 /*
- * $Id: physmap.c,v 1.38 2005/11/07 11:14:28 gleixner Exp $
+ * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $
  *
  * Normal mappings of chips in physical memory
  *
@@ -19,6 +19,7 @@
 #include <linux/mtd/map.h>
 #include <linux/config.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 static struct mtd_info *mymtd;
 

drivers/mtd/maps/sc520cdp.c

@@ -16,7 +16,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: sc520cdp.c,v 1.22 2005/11/07 11:14:28 gleixner Exp $
+ * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $
  *
  *
  * The SC520CDP is an evaluation board for the Elan SC520 processor available
@@ -164,7 +164,7 @@ struct sc520_par_table
 	unsigned long default_address;
 };
 
-static struct sc520_par_table par_table[NUM_FLASH_BANKS] =
+static const struct sc520_par_table par_table[NUM_FLASH_BANKS] =
 {
 	{	/* Flash Bank #0: selected by ROMCS0 */
 		SC520_PAR_ROMCS0,

drivers/mtd/nand/nandsim.c

@@ -1486,7 +1486,7 @@ ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 /*
  * Module initialization function
  */
-int __init ns_init_module(void)
+static int __init ns_init_module(void)
 {
 	struct nand_chip *chip;
 	struct nandsim *nand;

drivers/mtd/rfd_ftl.c

@@ -30,11 +30,9 @@ MODULE_PARM_DESC(block_size, "Block size to use by RFD, defaults to erase unit s
 
 #define PREFIX "rfd_ftl: "
 
-/* Major device # for FTL device */
+/* This major has been assigned by device@lanana.org */
-
-/* A request for this major has been sent to device@lanana.org */
 #ifndef RFD_FTL_MAJOR
-#define RFD_FTL_MAJOR		95
+#define RFD_FTL_MAJOR		256
 #endif
 
 /* Maximum number of partitions in an FTL region */

drivers/pcmcia/m32r_cfc.c

@@ -355,9 +355,10 @@ static void add_pcc_socket(ulong base, int irq, ulong mapaddr, kio_addr_t ioaddr
 #ifndef CONFIG_PLAT_USRV
 	/* insert interrupt */
 	request_irq(irq, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
+#ifndef CONFIG_PLAT_MAPPI3
 	/* eject interrupt */
 	request_irq(irq+1, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
-
+#endif
 	debug(3, "m32r_cfc: enable CFMSK, RDYSEL\n");
 	pcc_set(pcc_sockets, (unsigned int)PLD_CFIMASK, 0x01);
 #endif	/* CONFIG_PLAT_USRV */

drivers/scsi/megaraid.c

@@ -380,23 +380,23 @@ megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
 
 	spin_lock_irqsave(&adapter->lock, flags);
 	scb = mega_build_cmd(adapter, scmd, &busy);
+	if (!scb)
+		goto out;
 
-	if(scb) {
+	scb->state |= SCB_PENDQ;
-		scb->state |= SCB_PENDQ;
+	list_add_tail(&scb->list, &adapter->pending_list);
-		list_add_tail(&scb->list, &adapter->pending_list);
 
-		/*
+	/*
-		 * Check if the HBA is in quiescent state, e.g., during a
+	 * Check if the HBA is in quiescent state, e.g., during a
-		 * delete logical drive opertion. If it is, don't run
+	 * delete logical drive opertion. If it is, don't run
-		 * the pending_list.
+	 * the pending_list.
-		 */
+	 */
-		if(atomic_read(&adapter->quiescent) == 0) {
+	if (atomic_read(&adapter->quiescent) == 0)
-			mega_runpendq(adapter);
+		mega_runpendq(adapter);
-		}
+
-		return 0;
+	busy = 0;
-	}
+ out:
 	spin_unlock_irqrestore(&adapter->lock, flags);
-
 	return busy;
 }
 
@@ -4677,7 +4677,6 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	adapter->flag = flag;
 	spin_lock_init(&adapter->lock);
-	scsi_assign_lock(host, &adapter->lock);
 
 	host->cmd_per_lun = max_cmd_per_lun;
 	host->max_sectors = max_sectors_per_io;

drivers/serial/8250.c

@@ -102,7 +102,7 @@ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
 #define SERIAL_PORT_DFNS
 #endif
 
-static struct old_serial_port old_serial_port[] = {
+static const struct old_serial_port old_serial_port[] = {
 	SERIAL_PORT_DFNS /* defined in asm/serial.h */
 };
 

drivers/serial/8250_pci.c

@@ -468,7 +468,7 @@ static unsigned short timedia_eight_port[] = {
 	0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 };
 
-static struct timedia_struct {
+static const struct timedia_struct {
 	int num;
 	unsigned short *ids;
 } timedia_data[] = {

drivers/serial/serial_core.c

@@ -1779,7 +1779,7 @@ struct baud_rates {
 	unsigned int cflag;
 };
 
-static struct baud_rates baud_rates[] = {
+static const struct baud_rates baud_rates[] = {
 	{ 921600, B921600 },
 	{ 460800, B460800 },
 	{ 230400, B230400 },

drivers/serial/serial_cs.c

@@ -85,7 +85,7 @@ struct multi_id {
 	int multi;		/* 1 = multifunction, > 1 = # ports */
 };
 
-static struct multi_id multi_id[] = {
+static const struct multi_id multi_id[] = {
 	{ MANFID_OMEGA,   PRODID_OMEGA_QSP_100,         4 },
 	{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232,    2 },
 	{ MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
@@ -354,8 +354,8 @@ next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
 
 static int simple_config(dev_link_t *link)
 {
-	static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+	static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
-	static int size_table[2] = { 8, 16 };
+	static const int size_table[2] = { 8, 16 };
 	client_handle_t handle = link->handle;
 	struct serial_info *info = link->priv;
 	struct serial_cfg_mem *cfg_mem;

drivers/usb/atm/usbatm.c

@@ -879,7 +879,7 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 
  fail:
 	instance->atm_dev = NULL;
-	shutdown_atm_dev(atm_dev); /* usbatm_atm_dev_close will eventually be called */
+	atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
 	return ret;
 }
 
@@ -1164,7 +1164,7 @@ void usbatm_usb_disconnect(struct usb_interface *intf)
 
 	/* ATM finalize */
 	if (instance->atm_dev)
-		shutdown_atm_dev(instance->atm_dev);
+		atm_dev_deregister(instance->atm_dev);
 
 	usbatm_put_instance(instance);	/* taken in usbatm_usb_probe */
 }

drivers/video/Kconfig

@@ -534,6 +534,12 @@ config FB_SUN3
 	bool "Sun3 framebuffer support"
 	depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
 
+config FB_SBUS
+	bool "SBUS and UPA framebuffers"
+	depends on (FB = y) && (SPARC32 || SPARC64)
+	help
+	  Say Y if you want support for SBUS or UPA based frame buffer device.
+
 config FB_BW2
 	bool "BWtwo support"
 	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
@@ -546,6 +552,7 @@ config FB_BW2
 config FB_CG3
 	bool "CGthree support"
 	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	help
@@ -1210,12 +1217,6 @@ config FB_AU1100
 
 source "drivers/video/geode/Kconfig"
 
-config FB_SBUS
-	bool "SBUS and UPA framebuffers"
-	depends on (FB = y) && (SPARC32 || SPARC64)
-	help
-	  Say Y if you want support for SBUS or UPA based frame buffer device.
-
 config FB_FFB
 	bool "Creator/Creator3D/Elite3D support"
 	depends on FB_SBUS && SPARC64

drivers/video/cirrusfb.c

@@ -404,7 +404,7 @@ struct cirrusfb_info {
 	struct cirrusfb_regs currentmode;
 	int blank_mode;
 
-	u32	pseudo_palette[17];
+	u32	pseudo_palette[16];
 	struct { u8 red, green, blue, pad; } palette[256];
 
 #ifdef CONFIG_ZORRO
@@ -1603,14 +1603,14 @@ static int cirrusfb_setcolreg (unsigned regno, unsigned red, unsigned green,
 
 		switch (info->var.bits_per_pixel) {
 			case 8:
-				((u8*)(info->pseudo_palette))[regno] = v;
+				cinfo->pseudo_palette[regno] = v;
 				break;
 			case 16:
-				((u16*)(info->pseudo_palette))[regno] = v;
+				cinfo->pseudo_palette[regno] = v;
 				break;
 			case 24:
 			case 32:
-				((u32*)(info->pseudo_palette))[regno] = v;
+				cinfo->pseudo_palette[regno] = v;
 				break;
 		}
 		return 0;
@@ -2020,18 +2020,21 @@ static void cirrusfb_prim_fillrect(struct cirrusfb_info *cinfo,
 				   const struct fb_fillrect *region)
 {
 	int m; /* bytes per pixel */
+	u32 color = (cinfo->info->fix.visual == FB_VISUAL_TRUECOLOR) ?
+		cinfo->pseudo_palette[region->color] : region->color;
+
 	if(cinfo->info->var.bits_per_pixel == 1) {
 		cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel,
 				  region->dx / 8, region->dy,
 				  region->width / 8, region->height,
-				  region->color,
+				  color,
 				  cinfo->currentmode.line_length);
 	} else {
 		m = ( cinfo->info->var.bits_per_pixel + 7 ) / 8;
 		cirrusfb_RectFill(cinfo->regbase, cinfo->info->var.bits_per_pixel,
 				  region->dx * m, region->dy,
 				  region->width * m, region->height,
-				  region->color,
+				  color,
 				  cinfo->currentmode.line_length);
 	}
 	return;

drivers/video/console/fbcon_ccw.c

@@ -34,7 +34,7 @@ static inline void ccw_update_attr(u8 *dst, u8 *src, int attribute,
 		msk <<= (8 - mod);
 
 	if (offset > mod)
-		set_bit(FBCON_BIT(7), (void *)&msk1);
+		msk1 |= 0x01;
 
 	for (i = 0; i < vc->vc_font.width; i++) {
 		for (j = 0; j < width; j++) {

drivers/video/console/fbcon_rotate.h

@@ -21,21 +21,13 @@
         (s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
         (i)->var.xres : (i)->var.xres_virtual; })
 
-/*
- * The bitmap is always big endian
- */
-#if defined(__LITTLE_ENDIAN)
-#define FBCON_BIT(b) (7 - (b))
-#else
-#define FBCON_BIT(b) (b)
-#endif
 
 static inline int pattern_test_bit(u32 x, u32 y, u32 pitch, const char *pat)
 {
 	u32 tmp = (y * pitch) + x, index = tmp / 8,  bit = tmp % 8;
 
 	pat +=index;
-	return (test_bit(FBCON_BIT(bit), (void *)pat));
+	return (*pat) & (0x80 >> bit);
 }
 
 static inline void pattern_set_bit(u32 x, u32 y, u32 pitch, char *pat)
@@ -43,7 +35,8 @@ static inline void pattern_set_bit(u32 x, u32 y, u32 pitch, char *pat)
 	u32 tmp = (y * pitch) + x, index = tmp / 8, bit = tmp % 8;
 
 	pat += index;
-	set_bit(FBCON_BIT(bit), (void *)pat);
+
+	(*pat) |= 0x80 >> bit;
 }
 
 static inline void rotate_ud(const char *in, char *out, u32 width, u32 height)

fs/9p/vfs_inode.c

@@ -427,6 +427,8 @@ v9fs_create(struct inode *dir,
 
 	v9fs_mistat2inode(fcall->params.rstat.stat, file_inode, sb);
 	kfree(fcall);
+	fcall = NULL;
+	file_dentry->d_op = &v9fs_dentry_operations;
 	d_instantiate(file_dentry, file_inode);
 
 	if (perm & V9FS_DMDIR) {

fs/dquot.c

@@ -1513,10 +1513,16 @@ int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
 	if (IS_ERR(dentry))
 		return PTR_ERR(dentry);
 
+	if (!dentry->d_inode) {
+		error = -ENOENT;
+		goto out;
+	}
+
 	error = security_quota_on(dentry);
 	if (!error)
 		error = vfs_quota_on_inode(dentry->d_inode, type, format_id);
 
+out:
 	dput(dentry);
 	return error;
 }

fs/exec.c

@@ -306,9 +306,6 @@ void install_arg_page(struct vm_area_struct *vma,
 			struct page *page, unsigned long address)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	pgd_t * pgd;
-	pud_t * pud;
-	pmd_t * pmd;
 	pte_t * pte;
 	spinlock_t *ptl;
 
@@ -316,14 +313,7 @@ void install_arg_page(struct vm_area_struct *vma,
 		goto out;
 
 	flush_dcache_page(page);
-	pgd = pgd_offset(mm, address);
+	pte = get_locked_pte(mm, address, &ptl);
-	pud = pud_alloc(mm, pgd, address);
-	if (!pud)
-		goto out;
-	pmd = pmd_alloc(mm, pud, address);
-	if (!pmd)
-		goto out;
-	pte = pte_alloc_map_lock(mm, pmd, address, &ptl);
 	if (!pte)
 		goto out;
 	if (!pte_none(*pte)) {

fs/ext3/resize.c

@@ -767,6 +767,7 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input)
 	if (input->group != EXT3_SB(sb)->s_groups_count) {
 		ext3_warning(sb, __FUNCTION__,
 			     "multiple resizers run on filesystem!\n");
+		err = -EBUSY;
 		goto exit_journal;
 	}
 

fs/fuse/dir.c

@@ -74,6 +74,24 @@ static int fuse_dentry_revalidate(struct dentry *entry, struct nameidata *nd)
 	return 1;
 }
 
+static int dir_alias(struct inode *inode)
+{
+	if (S_ISDIR(inode->i_mode)) {
+		/* Don't allow creating an alias to a directory  */
+		struct dentry *alias = d_find_alias(inode);
+		if (alias) {
+			dput(alias);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static inline int invalid_nodeid(u64 nodeid)
+{
+	return !nodeid || nodeid == FUSE_ROOT_ID;
+}
+
 static struct dentry_operations fuse_dentry_operations = {
 	.d_revalidate	= fuse_dentry_revalidate,
 };
@@ -97,7 +115,7 @@ static int fuse_lookup_iget(struct inode *dir, struct dentry *entry,
 	fuse_lookup_init(req, dir, entry, &outarg);
 	request_send(fc, req);
 	err = req->out.h.error;
-	if (!err && (!outarg.nodeid || outarg.nodeid == FUSE_ROOT_ID))
+	if (!err && invalid_nodeid(outarg.nodeid))
 		err = -EIO;
 	if (!err) {
 		inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
@@ -193,7 +211,7 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode,
 	}
 
 	err = -EIO;
-	if (!S_ISREG(outentry.attr.mode))
+	if (!S_ISREG(outentry.attr.mode) || invalid_nodeid(outentry.nodeid))
 		goto out_free_ff;
 
 	inode = fuse_iget(dir->i_sb, outentry.nodeid, outentry.generation,
@@ -250,7 +268,7 @@ static int create_new_entry(struct fuse_conn *fc, struct fuse_req *req,
 		fuse_put_request(fc, req);
 		return err;
 	}
-	if (!outarg.nodeid || outarg.nodeid == FUSE_ROOT_ID) {
+	if (invalid_nodeid(outarg.nodeid)) {
 		fuse_put_request(fc, req);
 		return -EIO;
 	}
@@ -263,7 +281,7 @@ static int create_new_entry(struct fuse_conn *fc, struct fuse_req *req,
 	fuse_put_request(fc, req);
 
 	/* Don't allow userspace to do really stupid things... */
-	if ((inode->i_mode ^ mode) & S_IFMT) {
+	if (((inode->i_mode ^ mode) & S_IFMT) || dir_alias(inode)) {
 		iput(inode);
 		return -EIO;
 	}
@@ -874,14 +892,9 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
 	err = fuse_lookup_iget(dir, entry, &inode);
 	if (err)
 		return ERR_PTR(err);
-	if (inode && S_ISDIR(inode->i_mode)) {
+	if (inode && dir_alias(inode)) {
-		/* Don't allow creating an alias to a directory  */
+		iput(inode);
-		struct dentry *alias = d_find_alias(inode);
+		return ERR_PTR(-EIO);
-		if (alias) {
-			dput(alias);
-			iput(inode);
-			return ERR_PTR(-EIO);
-		}
 	}
 	d_add(entry, inode);
 	return NULL;

fs/hfsplus/hfsplus_fs.h

@@ -151,6 +151,7 @@ struct hfsplus_sb_info {
 
 #define HFSPLUS_SB_WRITEBACKUP	0x0001
 #define HFSPLUS_SB_NODECOMPOSE	0x0002
+#define HFSPLUS_SB_FORCE	0x0004
 
 
 struct hfsplus_inode_info {

fs/hfsplus/hfsplus_raw.h

@@ -123,11 +123,13 @@ struct hfsplus_vh {
 } __packed;
 
 /* HFS+ volume attributes */
-#define HFSPLUS_VOL_UNMNT     (1 << 8)
+#define HFSPLUS_VOL_UNMNT		(1 << 8)
-#define HFSPLUS_VOL_SPARE_BLK (1 << 9)
+#define HFSPLUS_VOL_SPARE_BLK		(1 << 9)
-#define HFSPLUS_VOL_NOCACHE   (1 << 10)
+#define HFSPLUS_VOL_NOCACHE		(1 << 10)
-#define HFSPLUS_VOL_INCNSTNT  (1 << 11)
+#define HFSPLUS_VOL_INCNSTNT		(1 << 11)
-#define HFSPLUS_VOL_SOFTLOCK  (1 << 15)
+#define HFSPLUS_VOL_NODEID_REUSED	(1 << 12)
+#define HFSPLUS_VOL_JOURNALED		(1 << 13)
+#define HFSPLUS_VOL_SOFTLOCK		(1 << 15)
 
 /* HFS+ BTree node descriptor */
 struct hfs_bnode_desc {

fs/hfsplus/options.c

@@ -22,7 +22,7 @@ enum {
 	opt_umask, opt_uid, opt_gid,
 	opt_part, opt_session, opt_nls,
 	opt_nodecompose, opt_decompose,
-	opt_err
+	opt_force, opt_err
 };
 
 static match_table_t tokens = {
@@ -36,6 +36,7 @@ static match_table_t tokens = {
 	{ opt_nls, "nls=%s" },
 	{ opt_decompose, "decompose" },
 	{ opt_nodecompose, "nodecompose" },
+	{ opt_force, "force" },
 	{ opt_err, NULL }
 };
 
@@ -145,6 +146,9 @@ int hfsplus_parse_options(char *input, struct hfsplus_sb_info *sbi)
 		case opt_nodecompose:
 			sbi->flags |= HFSPLUS_SB_NODECOMPOSE;
 			break;
+		case opt_force:
+			sbi->flags |= HFSPLUS_SB_FORCE;
+			break;
 		default:
 			return 0;
 		}

fs/hfsplus/super.c

@@ -251,16 +251,28 @@ static int hfsplus_remount(struct super_block *sb, int *flags, char *data)
 		return 0;
 	if (!(*flags & MS_RDONLY)) {
 		struct hfsplus_vh *vhdr = HFSPLUS_SB(sb).s_vhdr;
+		struct hfsplus_sb_info sbi;
+
+		memset(&sbi, 0, sizeof(struct hfsplus_sb_info));
+		sbi.nls = HFSPLUS_SB(sb).nls;
+		if (!hfsplus_parse_options(data, &sbi))
+			return -EINVAL;
 
 		if (!(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
 			printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
 			       "running fsck.hfsplus is recommended.  leaving read-only.\n");
 			sb->s_flags |= MS_RDONLY;
 			*flags |= MS_RDONLY;
+		} else if (sbi.flags & HFSPLUS_SB_FORCE) {
+			/* nothing */
 		} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
 			printk("HFS+-fs: Filesystem is marked locked, leaving read-only.\n");
 			sb->s_flags |= MS_RDONLY;
 			*flags |= MS_RDONLY;
+		} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
+			printk("HFS+-fs: Filesystem is marked journaled, leaving read-only.\n");
+			sb->s_flags |= MS_RDONLY;
+			*flags |= MS_RDONLY;
 		}
 	}
 	return 0;
@@ -352,11 +364,19 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent)
 			printk("HFS+-fs warning: Filesystem was not cleanly unmounted, "
 			       "running fsck.hfsplus is recommended.  mounting read-only.\n");
 		sb->s_flags |= MS_RDONLY;
+	} else if (sbi->flags & HFSPLUS_SB_FORCE) {
+		/* nothing */
 	} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
 		if (!silent)
 			printk("HFS+-fs: Filesystem is marked locked, mounting read-only.\n");
 		sb->s_flags |= MS_RDONLY;
+	} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
+		if (!silent)
+			printk("HFS+-fs: write access to a jounaled filesystem is not supported, "
+			       "use the force option at your own risk, mounting read-only.\n");
+		sb->s_flags |= MS_RDONLY;
 	}
+	sbi->flags &= ~HFSPLUS_SB_FORCE;
 
 	/* Load metadata objects (B*Trees) */
 	HFSPLUS_SB(sb).ext_tree = hfs_btree_open(sb, HFSPLUS_EXT_CNID);

fs/jffs2/fs.c

@@ -234,6 +234,7 @@ void jffs2_read_inode (struct inode *inode)
 	c = JFFS2_SB_INFO(inode->i_sb);
 
 	jffs2_init_inode_info(f);
+	down(&f->sem);
 
 	ret = jffs2_do_read_inode(c, f, inode->i_ino, &latest_node);
 
@@ -400,6 +401,7 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i
 
 	f = JFFS2_INODE_INFO(inode);
 	jffs2_init_inode_info(f);
+	down(&f->sem);
 
 	memset(ri, 0, sizeof(*ri));
 	/* Set OS-specific defaults for new inodes */

fs/jffs2/super.c

@@ -51,7 +51,7 @@ static void jffs2_i_init_once(void * foo, kmem_cache_t * cachep, unsigned long f
 
 	if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
 	    SLAB_CTOR_CONSTRUCTOR) {
-		init_MUTEX_LOCKED(&ei->sem);
+		init_MUTEX(&ei->sem);
 		inode_init_once(&ei->vfs_inode);
 	}
 }

fs/proc/task_mmu.c

@@ -402,12 +402,11 @@ struct numa_maps {
 /*
  * Calculate numa node maps for a vma
  */
-static struct numa_maps *get_numa_maps(const struct vm_area_struct *vma)
+static struct numa_maps *get_numa_maps(struct vm_area_struct *vma)
 {
+	int i;
 	struct page *page;
 	unsigned long vaddr;
-	struct mm_struct *mm = vma->vm_mm;
-	int i;
 	struct numa_maps *md = kmalloc(sizeof(struct numa_maps), GFP_KERNEL);
 
 	if (!md)
@@ -420,7 +419,7 @@ static struct numa_maps *get_numa_maps(const struct vm_area_struct *vma)
 		md->node[i] =0;
 
  	for (vaddr = vma->vm_start; vaddr < vma->vm_end; vaddr += PAGE_SIZE) {
-		page = follow_page(mm, vaddr, 0);
+		page = follow_page(vma, vaddr, 0);
 		if (page) {
 			int count = page_mapcount(page);
 

fs/reiserfs/inode.c

@@ -2194,7 +2194,7 @@ static int map_block_for_writepage(struct inode *inode,
 	INITIALIZE_PATH(path);
 	int pos_in_item;
 	int jbegin_count = JOURNAL_PER_BALANCE_CNT;
-	loff_t byte_offset = (block << inode->i_sb->s_blocksize_bits) + 1;
+	loff_t byte_offset = ((loff_t)block << inode->i_sb->s_blocksize_bits)+1;
 	int retval;
 	int use_get_block = 0;
 	int bytes_copied = 0;

fs/reiserfs/journal.c

@@ -2757,6 +2757,15 @@ int journal_init(struct super_block *p_s_sb, const char *j_dev_name,
 	journal->j_cnode_used = 0;
 	journal->j_must_wait = 0;
 
+	if (journal->j_cnode_free == 0) {
+        	reiserfs_warning(p_s_sb, "journal-2004: Journal cnode memory "
+		                 "allocation failed (%ld bytes). Journal is "
+		                 "too large for available memory. Usually "
+		                 "this is due to a journal that is too large.",
+		                 sizeof (struct reiserfs_journal_cnode) * num_cnodes);
+        	goto free_and_return;
+	}
+
 	init_journal_hash(p_s_sb);
 	jl = journal->j_current_jl;
 	jl->j_list_bitmap = get_list_bitmap(p_s_sb, jl);

include/asm-arm/arch-s3c2410/regs-gpio.h

@@ -21,6 +21,7 @@
  *    10-Mar-2005    LCVR    Changed S3C2410_VA to S3C24XX_VA
  *    28-Mar-2005    LCVR    Fixed definition of GPB10
  *    26-Oct-2005    BJD     Added generic configuration types
+ *    27-Nov-2005    LCVR    Added definitions to S3C2400 registers
 */
 
 
@@ -54,12 +55,16 @@
 
 #define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
 
-/* port A - 22bits, zero in bit X makes pin X output
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ *          S3C2400: 18bits, zero in bit X makes pin X output
  * 1 makes port special function, this is default
 */
 #define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
 
+#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
+
 #define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
 #define S3C2410_GPA0_OUT     (0<<0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
@@ -103,34 +108,42 @@
 #define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
 #define S3C2410_GPA10_OUT    (0<<10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE   (1<<10)
 
 #define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
 #define S3C2410_GPA11_OUT    (0<<11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0  (1<<11)
 
 #define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
 #define S3C2410_GPA12_OUT    (0<<12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
+#define S3C2400_GPA12_nCAS1  (1<<12)
 
 #define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
 #define S3C2410_GPA13_OUT    (0<<13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
+#define S3C2400_GPA13_nGCS1  (1<<13)
 
 #define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
 #define S3C2410_GPA14_OUT    (0<<14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
+#define S3C2400_GPA14_nGCS2  (1<<14)
 
 #define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
 #define S3C2410_GPA15_OUT    (0<<15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
+#define S3C2400_GPA15_nGCS3  (1<<15)
 
 #define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
 #define S3C2410_GPA16_OUT    (0<<16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
+#define S3C2400_GPA16_nGCS4  (1<<16)
 
 #define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
 #define S3C2410_GPA17_OUT    (0<<17)
 #define S3C2410_GPA17_CLE    (1<<17)
+#define S3C2400_GPA17_nGCS5  (1<<17)
 
 #define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
 #define S3C2410_GPA18_OUT    (0<<18)
@@ -152,10 +165,16 @@
 #define S3C2410_GPA22_OUT    (0<<22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
-/* 0x08 and 0x0c are reserved */
+/* 0x08 and 0x0c are reserved on S3C2410 */
 
-/* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
  *   00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=data, 11=special function
+
  * bit 0,1 = pin 0, 2,3= pin 1...
  *
  * CPBUP = pull up resistor control, 1=disabled, 0=enabled
@@ -165,63 +184,113 @@
 #define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
 #define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
 
+#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
+
 /* no i/o pin in port b can have value 3! */
 
 #define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
 #define S3C2410_GPB0_INP     (0x00 << 0)
 #define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
+#define S3C2400_GPB0_DATA16  (0x02 << 0)
 
 #define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
 #define S3C2410_GPB1_INP     (0x00 << 2)
 #define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
+#define S3C2400_GPB1_DATA17  (0x02 << 2)
 
 #define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
 #define S3C2410_GPB2_INP     (0x00 << 4)
 #define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
+#define S3C2400_GPB2_DATA18  (0x02 << 4)
+#define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
 #define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
 #define S3C2410_GPB3_INP     (0x00 << 6)
 #define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
+#define S3C2400_GPB3_DATA19  (0x02 << 6)
+#define S3C2400_GPB3_TXD1    (0x03 << 6)
 
 #define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
 #define S3C2410_GPB4_INP     (0x00 << 8)
 #define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
+#define S3C2400_GPB4_RXD1    (0x03 << 8)
+#define S3C2400_GPB4_MASK    (0x03 << 8)
 
 #define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
 #define S3C2410_GPB5_INP     (0x00 << 10)
 #define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2400_GPB5_DATA21  (0x02 << 10)
+#define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
 #define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
 #define S3C2410_GPB6_INP     (0x00 << 12)
 #define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2400_GPB6_DATA22  (0x02 << 12)
+#define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
 #define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
 #define S3C2410_GPB7_INP     (0x00 << 14)
 #define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2400_GPB7_DATA23  (0x02 << 14)
 
 #define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
 #define S3C2410_GPB8_INP     (0x00 << 16)
 #define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24  (0x02 << 16)
 
 #define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
 #define S3C2410_GPB9_INP     (0x00 << 18)
 #define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2400_GPB9_DATA25  (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
 #define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
 #define S3C2410_GPB10_INP    (0x00 << 20)
 #define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS    (0x03 << 20)
+
+#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP    (0x00 << 22)
+#define S3C2400_GPB11_OUTP   (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP    (0x00 << 24)
+#define S3C2400_GPB12_OUTP   (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP    (0x00 << 26)
+#define S3C2400_GPB13_OUTP   (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP    (0x00 << 28)
+#define S3C2400_GPB14_OUTP   (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP    (0x00 << 30)
+#define S3C2400_GPB15_OUTP   (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
 
 /* Port C consits of 16 GPIO/Special function
  *
@@ -233,150 +302,193 @@
 #define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
 
+#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
+
 #define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
 #define S3C2410_GPC0_INP	(0x00 << 0)
 #define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
+#define S3C2400_GPC0_VD0 	(0x02 << 0)
 
 #define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
 #define S3C2410_GPC1_INP	(0x00 << 2)
 #define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
+#define S3C2400_GPC1_VD1 	(0x02 << 2)
 
 #define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
 #define S3C2410_GPC2_INP	(0x00 << 4)
 #define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
+#define S3C2400_GPC2_VD2  	(0x02 << 4)
 
 #define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
 #define S3C2410_GPC3_INP	(0x00 << 6)
 #define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
+#define S3C2400_GPC3_VD3   	(0x02 << 6)
 
 #define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
 #define S3C2410_GPC4_INP	(0x00 << 8)
 #define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
+#define S3C2400_GPC4_VD4	(0x02 << 8)
 
 #define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
 #define S3C2410_GPC5_INP	(0x00 << 10)
 #define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+#define S3C2400_GPC5_VD5   	(0x02 << 10)
 
 #define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
 #define S3C2410_GPC6_INP	(0x00 << 12)
 #define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+#define S3C2400_GPC6_VD6   	(0x02 << 12)
 
 #define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
 #define S3C2410_GPC7_INP	(0x00 << 14)
 #define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+#define S3C2400_GPC7_VD7   	(0x02 << 14)
 
 #define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
 #define S3C2410_GPC8_INP	(0x00 << 16)
 #define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
+#define S3C2400_GPC8_VD8	(0x02 << 16)
 
 #define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
 #define S3C2410_GPC9_INP	(0x00 << 18)
 #define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
+#define S3C2400_GPC9_VD9	(0x02 << 18)
 
 #define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
 #define S3C2410_GPC10_INP	(0x00 << 20)
 #define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
+#define S3C2400_GPC10_VD10	(0x02 << 20)
 
 #define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
 #define S3C2410_GPC11_INP	(0x00 << 22)
 #define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
+#define S3C2400_GPC11_VD11	(0x02 << 22)
 
 #define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
 #define S3C2410_GPC12_INP	(0x00 << 24)
 #define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
+#define S3C2400_GPC12_VD12	(0x02 << 24)
 
 #define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
 #define S3C2410_GPC13_INP	(0x00 << 26)
 #define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
+#define S3C2400_GPC13_VD13	(0x02 << 26)
 
 #define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
 #define S3C2410_GPC14_INP	(0x00 << 28)
 #define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
+#define S3C2400_GPC14_VD14	(0x02 << 28)
 
 #define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
 #define S3C2410_GPC15_INP	(0x00 << 30)
 #define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
+#define S3C2400_GPC15_VD15	(0x02 << 30)
 
-/* Port D consists of 16 GPIO/Special function
+#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
  *
  * almost identical setup to port b, but the special functions are mostly
  * to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
 */
 
 #define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
 #define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
 #define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
 
+#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
+
 #define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
 #define S3C2410_GPD0_INP	(0x00 << 0)
 #define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
+#define S3C2400_GPD0_VFRAME	(0x02 << 0)
 
 #define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
 #define S3C2410_GPD1_INP	(0x00 << 2)
 #define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
+#define S3C2400_GPD1_VM		(0x02 << 2)
 
 #define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
 #define S3C2410_GPD2_INP	(0x00 << 4)
 #define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
+#define S3C2400_GPD2_VLINE	(0x02 << 4)
 
 #define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
 #define S3C2410_GPD3_INP	(0x00 << 6)
 #define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
+#define S3C2400_GPD3_VCLK	(0x02 << 6)
 
 #define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
 #define S3C2410_GPD4_INP	(0x00 << 8)
 #define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
+#define S3C2400_GPD4_LEND	(0x02 << 8)
 
 #define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
 #define S3C2410_GPD5_INP	(0x00 << 10)
 #define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
+#define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
 #define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
 #define S3C2410_GPD6_INP	(0x00 << 12)
 #define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
+#define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
 #define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
 #define S3C2410_GPD7_INP	(0x00 << 14)
 #define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
+#define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
 #define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
 #define S3C2410_GPD8_INP	(0x00 << 16)
 #define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
+#define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
 #define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
 #define S3C2410_GPD9_INP	(0x00 << 18)
 #define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
+#define S3C2400_GPD9_TCLK0	(0x02 << 18)
+#define S3C2410_GPD9_MASK       (0x03 << 18)
 
 #define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
 #define S3C2410_GPD10_INP	(0x00 << 20)
 #define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
+#define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
 #define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
 #define S3C2410_GPD11_INP	(0x00 << 22)
@@ -403,37 +515,56 @@
 #define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 
-/* Port E consists of 16 GPIO/Special function
+#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
  *
  * again, the same as port B, but dealing with I2S, SDI, and
  * more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
 */
 
 #define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
 #define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
 #define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
 
+#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
+
 #define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
 #define S3C2410_GPE0_INP       (0x00 << 0)
 #define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
 #define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
 #define S3C2410_GPE1_INP       (0x00 << 2)
 #define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2400_GPE1_EINT1     (0x02 << 2)
+#define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
 #define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
 #define S3C2410_GPE2_INP       (0x00 << 4)
 #define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2400_GPE2_EINT2     (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
 #define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
 #define S3C2410_GPE3_INP       (0x00 << 6)
 #define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2400_GPE3_EINT3     (0x02 << 6)
+#define S3C2400_GPE3_nCTS1     (0x03 << 6)
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
@@ -441,6 +572,8 @@
 #define S3C2410_GPE4_INP       (0x00 << 8)
 #define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2400_GPE4_EINT4     (0x02 << 8)
+#define S3C2400_GPE4_nRTS1     (0x03 << 8)
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
@@ -448,36 +581,46 @@
 #define S3C2410_GPE5_INP       (0x00 << 10)
 #define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2400_GPE5_EINT5     (0x02 << 10)
+#define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
 #define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
 #define S3C2410_GPE6_INP       (0x00 << 12)
 #define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
 #define S3C2410_GPE7_INP       (0x00 << 14)
 #define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
 #define S3C2410_GPE8_INP       (0x00 << 16)
 #define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
 #define S3C2410_GPE9_INP       (0x00 << 18)
 #define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
+#define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
 #define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
 #define S3C2410_GPE10_INP      (0x00 << 20)
 #define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
 #define S3C2410_GPE11_INP      (0x00 << 22)
 #define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
 #define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
 #define S3C2410_GPE12_INP      (0x00 << 24)
@@ -509,7 +652,8 @@
 
 #define S3C2410_GPE_PUPDIS(x)  (1<<(x))
 
-/* Port F consists of 8 GPIO/Special function
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
  *
  * GPIO / interrupt inputs
  *
@@ -517,100 +661,141 @@
  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
  *
  * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
 */
 
 #define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
 #define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
 #define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
 
+#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
+
 #define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
 #define S3C2410_GPF0_INP    (0x00 << 0)
 #define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
+#define S3C2400_GPF0_RXD0   (0x02 << 0)
 
 #define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
 #define S3C2410_GPF1_INP    (0x00 << 2)
 #define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
+#define S3C2400_GPF1_RXD1   (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
 
 #define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
 #define S3C2410_GPF2_INP    (0x00 << 4)
 #define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
+#define S3C2400_GPF2_TXD0   (0x02 << 4)
 
 #define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
 #define S3C2410_GPF3_INP    (0x00 << 6)
 #define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
+#define S3C2400_GPF3_TXD1   (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
 
 #define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
 #define S3C2410_GPF4_INP    (0x00 << 8)
 #define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
+#define S3C2400_GPF4_nRTS0  (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
 
 #define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
 #define S3C2410_GPF5_INP    (0x00 << 10)
 #define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
+#define S3C2400_GPF5_nCTS0  (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
 #define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
 #define S3C2410_GPF6_INP    (0x00 << 12)
 #define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
 #define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
 #define S3C2410_GPF7_INP    (0x00 << 14)
 #define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
-/* Port G consists of 8 GPIO/IRQ/Special function
+#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
  *
  * GPGCON has 2 bits for each of the input pins on port F
  *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
  *
  * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
 */
 
 #define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
 #define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
 #define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
 
+#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
+
 #define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
 #define S3C2410_GPG0_INP      (0x00 << 0)
 #define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
 #define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
 #define S3C2410_GPG1_INP      (0x00 << 2)
 #define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
 #define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
 #define S3C2410_GPG2_INP      (0x00 << 4)
 #define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
 #define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
 #define S3C2410_GPG3_INP      (0x00 << 6)
 #define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
 #define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
 #define S3C2410_GPG4_INP      (0x00 << 8)
 #define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 
 #define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
 #define S3C2410_GPG5_INP      (0x00 << 10)
 #define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
+#define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
 
 #define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
 #define S3C2410_GPG6_INP      (0x00 << 12)
 #define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
+#define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
 #define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
@@ -618,16 +803,22 @@
 #define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
+#define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
 #define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
 #define S3C2410_GPG8_INP      (0x00 << 16)
 #define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
+#define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
 #define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
 #define S3C2410_GPG9_INP      (0x00 << 18)
 #define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
+#define S3C2400_GPG9_SPICLK   (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
 #define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG10_INP     (0x00 << 20)
@@ -737,19 +928,27 @@
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* miscellaneous control */
-
+#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
 #define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
 
 /* see clock.h for dclk definitions */
 
 /* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN    (0)
+#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
 #define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN    (0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
 #define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
 
-#define S3C2410_MISCCR_USBDEV	    (0)
+#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
 #define S3C2410_MISCCR_USBHOST	    (1<<3)
 
 #define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
@@ -785,7 +984,7 @@
  *
  * Samsung datasheet p9-25
 */
-
+#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
 #define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
 #define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
 #define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
@@ -833,5 +1032,21 @@
 #define S3C2410_GSTATUS2_OFFRESET  (1<<1)
 #define S3C2410_GSTATUS2_PONRESET  (1<<0)
 
+/* open drain control register */
+#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
+
 #endif	/* __ASM_ARCH_REGS_GPIO_H */
 

include/asm-arm/arch-sa1100/io.h

@@ -10,8 +10,6 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*

include/asm-frv/hardirq.h

@@ -14,6 +14,7 @@
 
 #include <linux/config.h>
 #include <linux/threads.h>
+#include <linux/irq.h>
 
 typedef struct {
 	unsigned int __softirq_pending;

include/asm-frv/ide.h

@@ -33,10 +33,10 @@
 /*
  * some bits needed for parts of the IDE subsystem to compile
  */
-#define __ide_mm_insw(port, addr, n)	insw(port, addr, n)
+#define __ide_mm_insw(port, addr, n)	insw((unsigned long) (port), addr, n)
-#define __ide_mm_insl(port, addr, n)	insl(port, addr, n)
+#define __ide_mm_insl(port, addr, n)	insl((unsigned long) (port), addr, n)
-#define __ide_mm_outsw(port, addr, n)	outsw(port, addr, n)
+#define __ide_mm_outsw(port, addr, n)	outsw((unsigned long) (port), addr, n)
-#define __ide_mm_outsl(port, addr, n)	outsl(port, addr, n)
+#define __ide_mm_outsl(port, addr, n)	outsl((unsigned long) (port), addr, n)
 
 
 #endif /* __KERNEL__ */

include/asm-frv/page.h

@@ -47,8 +47,8 @@ typedef struct { unsigned long	pgprot;	} pgprot_t;
 
 #define devmem_is_allowed(pfn)	1
 
-#define __pa(vaddr)		virt_to_phys((void *) vaddr)
+#define __pa(vaddr)		virt_to_phys((void *) (unsigned long) (vaddr))
-#define __va(paddr)		phys_to_virt((unsigned long) paddr)
+#define __va(paddr)		phys_to_virt((unsigned long) (paddr))
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 

include/asm-frv/semaphore.h

@@ -20,7 +20,7 @@
 #include <linux/spinlock.h>
 #include <linux/rwsem.h>
 
-#define SEMAPHORE_DEBUG		WAITQUEUE_DEBUG
+#define SEMAPHORE_DEBUG		0
 
 /*
  * the semaphore definition

include/asm-frv/thread_info.h

@@ -58,7 +58,7 @@ struct thread_info {
 
 #endif
 
-#define PREEMPT_ACTIVE		0x4000000
+#define PREEMPT_ACTIVE		0x10000000
 
 /*
  * macros/functions for gaining access to the thread information structure

include/asm-ia64/page.h

@@ -110,8 +110,9 @@ extern int ia64_pfn_valid (unsigned long pfn);
 # define pfn_to_page(pfn)	(mem_map + (pfn))
 #elif defined(CONFIG_DISCONTIGMEM)
 extern struct page *vmem_map;
+extern unsigned long min_low_pfn;
 extern unsigned long max_low_pfn;
-# define pfn_valid(pfn)		(((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+# define pfn_valid(pfn)		(((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
 # define page_to_pfn(page)	((unsigned long) (page - vmem_map))
 # define pfn_to_page(pfn)	(vmem_map + (pfn))
 #endif

include/asm-m32r/atomic.h

@@ -242,6 +242,27 @@ static __inline__ int atomic_dec_return(atomic_t *v)
  */
 #define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0)
 
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+#define atomic_add_unless(v, a, u)				\
+({								\
+	int c, old;						\
+	c = atomic_read(v);					\
+	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+		c = old;					\
+	c != (u);						\
+})
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
 static __inline__ void atomic_clear_mask(unsigned long  mask, atomic_t *addr)
 {
 	unsigned long flags;

include/asm-m32r/ide.h

@@ -25,20 +25,23 @@
 # endif
 #endif
 
-#if defined(CONFIG_PLAT_M32700UT)
+#include <asm/m32r.h>
-#include <asm/irq.h>
+
-#include <asm/m32700ut/m32700ut_pld.h>
-#endif
 
 #define IDE_ARCH_OBSOLETE_DEFAULTS
 
 static __inline__ int ide_default_irq(unsigned long base)
 {
 	switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3)
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2)
 		case 0x1f0: return PLD_IRQ_CFIREQ;
 		default:
 			return 0;
+#elif defined(CONFIG_PLAT_MAPPI3)
+		case 0x1f0: return PLD_IRQ_CFIREQ;
+		case 0x170: return PLD_IRQ_IDEIREQ;
+		default:
+			return 0;
 #else
 		case 0x1f0: return 14;
 		case 0x170: return 15;