regulator: tps6507x: add device tree support.
Add device tree based initialization support for TI's tps6507x regulators. Add device tree binding document for TI's tps6507x using datasheet: http://www.ti.com/lit/ds/symlink/tps65070.pdf Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Родитель
949db153b6
Коммит
6116ad94e1
|
@ -0,0 +1,91 @@
|
||||||
|
TPS6507x Power Management Integrated Circuit
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible: "ti,tps6507x"
|
||||||
|
- reg: I2C slave address
|
||||||
|
- regulators: This is the list of child nodes that specify the regulator
|
||||||
|
initialization data for defined regulators. Not all regulators for the
|
||||||
|
given device need to be present. The definition for each of these nodes
|
||||||
|
is defined using the standard binding for regulators found at
|
||||||
|
Documentation/devicetree/bindings/regulator/regulator.txt.
|
||||||
|
The regulator is matched with the regulator-compatible.
|
||||||
|
|
||||||
|
The valid regulator-compatible values are:
|
||||||
|
tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
|
||||||
|
- xxx-supply: Input voltage supply regulator.
|
||||||
|
These entries are required if regulators are enabled for a device.
|
||||||
|
Missing of these properties can cause the regulator registration
|
||||||
|
fails.
|
||||||
|
If some of input supply is powered through battery or always-on
|
||||||
|
supply then also it is require to have these parameters with proper
|
||||||
|
node handle of always on power supply.
|
||||||
|
tps6507x:
|
||||||
|
vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
|
||||||
|
vindcdc3-supply : VDCDC3 input.
|
||||||
|
vldo1_2-supply : VLDO1 and VLDO2 input.
|
||||||
|
|
||||||
|
Regulator Optional properties:
|
||||||
|
- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
|
||||||
|
0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
|
||||||
|
1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
|
||||||
|
If this property is not defined, it defaults to 0 (not enabled).
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
pmu: tps6507x@48 {
|
||||||
|
compatible = "ti,tps6507x";
|
||||||
|
reg = <0x48>;
|
||||||
|
|
||||||
|
vindcdc1_2-supply = <&vbat>;
|
||||||
|
vindcdc3-supply = <...>;
|
||||||
|
vinldo1_2-supply = <...>;
|
||||||
|
|
||||||
|
regulators {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
vdcdc1_reg: regulator@0 {
|
||||||
|
regulator-compatible = "VDCDC1";
|
||||||
|
reg = <0>;
|
||||||
|
regulator-min-microvolt = <3150000>;
|
||||||
|
regulator-max-microvolt = <3450000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
vdcdc2_reg: regulator@1 {
|
||||||
|
regulator-compatible = "VDCDC2";
|
||||||
|
reg = <1>;
|
||||||
|
regulator-min-microvolt = <1710000>;
|
||||||
|
regulator-max-microvolt = <3450000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
defdcdc_default = <1>;
|
||||||
|
};
|
||||||
|
vdcdc3_reg: regulator@2 {
|
||||||
|
regulator-compatible = "VDCDC3";
|
||||||
|
reg = <2>;
|
||||||
|
regulator-min-microvolt = <950000>
|
||||||
|
regulator-max-microvolt = <1350000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
defdcdc_default = <1>;
|
||||||
|
};
|
||||||
|
ldo1_reg: regulator@3 {
|
||||||
|
regulator-compatible = "LDO1";
|
||||||
|
reg = <3>;
|
||||||
|
regulator-min-microvolt = <1710000>;
|
||||||
|
regulator-max-microvolt = <1890000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
ldo2_reg: regulator@4 {
|
||||||
|
regulator-compatible = "LDO2";
|
||||||
|
reg = <4>;
|
||||||
|
regulator-min-microvolt = <1140000>;
|
||||||
|
regulator-max-microvolt = <1320000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
|
@ -23,8 +23,10 @@
|
||||||
#include <linux/regulator/driver.h>
|
#include <linux/regulator/driver.h>
|
||||||
#include <linux/regulator/machine.h>
|
#include <linux/regulator/machine.h>
|
||||||
#include <linux/regulator/tps6507x.h>
|
#include <linux/regulator/tps6507x.h>
|
||||||
|
#include <linux/of.h>
|
||||||
#include <linux/slab.h>
|
#include <linux/slab.h>
|
||||||
#include <linux/mfd/tps6507x.h>
|
#include <linux/mfd/tps6507x.h>
|
||||||
|
#include <linux/regulator/of_regulator.h>
|
||||||
|
|
||||||
/* DCDC's */
|
/* DCDC's */
|
||||||
#define TPS6507X_DCDC_1 0
|
#define TPS6507X_DCDC_1 0
|
||||||
|
@ -356,6 +358,80 @@ static struct regulator_ops tps6507x_pmic_ops = {
|
||||||
.list_voltage = regulator_list_voltage_table,
|
.list_voltage = regulator_list_voltage_table,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
#ifdef CONFIG_OF
|
||||||
|
static struct of_regulator_match tps6507x_matches[] = {
|
||||||
|
{ .name = "VDCDC1"},
|
||||||
|
{ .name = "VDCDC2"},
|
||||||
|
{ .name = "VDCDC3"},
|
||||||
|
{ .name = "LDO1"},
|
||||||
|
{ .name = "LDO2"},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct tps6507x_board *tps6507x_parse_dt_reg_data(
|
||||||
|
struct platform_device *pdev,
|
||||||
|
struct of_regulator_match **tps6507x_reg_matches)
|
||||||
|
{
|
||||||
|
struct tps6507x_board *tps_board;
|
||||||
|
struct device_node *np = pdev->dev.parent->of_node;
|
||||||
|
struct device_node *regulators;
|
||||||
|
struct of_regulator_match *matches;
|
||||||
|
static struct regulator_init_data *reg_data;
|
||||||
|
int idx = 0, count, ret;
|
||||||
|
|
||||||
|
tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board),
|
||||||
|
GFP_KERNEL);
|
||||||
|
if (!tps_board) {
|
||||||
|
dev_err(&pdev->dev, "Failure to alloc pdata for regulators.\n");
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
regulators = of_find_node_by_name(np, "regulators");
|
||||||
|
if (!regulators) {
|
||||||
|
dev_err(&pdev->dev, "regulator node not found\n");
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
count = ARRAY_SIZE(tps6507x_matches);
|
||||||
|
matches = tps6507x_matches;
|
||||||
|
|
||||||
|
ret = of_regulator_match(pdev->dev.parent, regulators, matches, count);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
|
||||||
|
ret);
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
*tps6507x_reg_matches = matches;
|
||||||
|
|
||||||
|
reg_data = devm_kzalloc(&pdev->dev, (sizeof(struct regulator_init_data)
|
||||||
|
* TPS6507X_NUM_REGULATOR), GFP_KERNEL);
|
||||||
|
if (!reg_data) {
|
||||||
|
dev_err(&pdev->dev, "Failure to alloc init data for regulators.\n");
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
tps_board->tps6507x_pmic_init_data = reg_data;
|
||||||
|
|
||||||
|
for (idx = 0; idx < count; idx++) {
|
||||||
|
if (!matches[idx].init_data || !matches[idx].of_node)
|
||||||
|
continue;
|
||||||
|
|
||||||
|
memcpy(®_data[idx], matches[idx].init_data,
|
||||||
|
sizeof(struct regulator_init_data));
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
return tps_board;
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline struct tps6507x_board *tps6507x_parse_dt_reg_data(
|
||||||
|
struct platform_device *pdev,
|
||||||
|
struct of_regulator_match **tps6507x_reg_matches)
|
||||||
|
{
|
||||||
|
*tps6507x_reg_matches = NULL;
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
static int tps6507x_pmic_probe(struct platform_device *pdev)
|
static int tps6507x_pmic_probe(struct platform_device *pdev)
|
||||||
{
|
{
|
||||||
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
|
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
|
||||||
|
@ -365,8 +441,10 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
|
||||||
struct regulator_dev *rdev;
|
struct regulator_dev *rdev;
|
||||||
struct tps6507x_pmic *tps;
|
struct tps6507x_pmic *tps;
|
||||||
struct tps6507x_board *tps_board;
|
struct tps6507x_board *tps_board;
|
||||||
|
struct of_regulator_match *tps6507x_reg_matches = NULL;
|
||||||
int i;
|
int i;
|
||||||
int error;
|
int error;
|
||||||
|
unsigned int prop;
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* tps_board points to pmic related constants
|
* tps_board points to pmic related constants
|
||||||
|
@ -374,6 +452,9 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
|
||||||
*/
|
*/
|
||||||
|
|
||||||
tps_board = dev_get_platdata(tps6507x_dev->dev);
|
tps_board = dev_get_platdata(tps6507x_dev->dev);
|
||||||
|
if (!tps_board && tps6507x_dev->dev->of_node)
|
||||||
|
tps_board = tps6507x_parse_dt_reg_data(pdev,
|
||||||
|
&tps6507x_reg_matches);
|
||||||
if (!tps_board)
|
if (!tps_board)
|
||||||
return -EINVAL;
|
return -EINVAL;
|
||||||
|
|
||||||
|
@ -415,6 +496,17 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
|
||||||
config.init_data = init_data;
|
config.init_data = init_data;
|
||||||
config.driver_data = tps;
|
config.driver_data = tps;
|
||||||
|
|
||||||
|
if (tps6507x_reg_matches) {
|
||||||
|
error = of_property_read_u32(
|
||||||
|
tps6507x_reg_matches[i].of_node,
|
||||||
|
"ti,defdcdc_default", &prop);
|
||||||
|
|
||||||
|
if (!error)
|
||||||
|
tps->info[i]->defdcdc_default = prop;
|
||||||
|
|
||||||
|
config.of_node = tps6507x_reg_matches[i].of_node;
|
||||||
|
}
|
||||||
|
|
||||||
rdev = regulator_register(&tps->desc[i], &config);
|
rdev = regulator_register(&tps->desc[i], &config);
|
||||||
if (IS_ERR(rdev)) {
|
if (IS_ERR(rdev)) {
|
||||||
dev_err(tps6507x_dev->dev,
|
dev_err(tps6507x_dev->dev,
|
||||||
|
|
Загрузка…
Ссылка в новой задаче