MIPS: SEAD3: Combine all platform device registrations in one file.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ralf Baechle
Родитель
21c784b93b
Коммит
612544fbde
|
|
@ -8,12 +8,11 @@
|
|||
# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved.
|
||||
# Steven J. Hill <sjhill@mips.com>
|
||||
#
|
||||
obj-y := sead3-lcd.o sead3-display.o sead3-ehci.o \
|
||||
sead3-init.o sead3-int.o sead3-mtd.o \
|
||||
sead3-net.o sead3-platform.o sead3-reset.o \
|
||||
obj-y := sead3-lcd.o sead3-display.o sead3-init.o \
|
||||
sead3-int.o sead3-platform.o sead3-reset.o \
|
||||
sead3-setup.o sead3-time.o
|
||||
|
||||
obj-y += leds-sead3.o sead3-leds.o
|
||||
obj-y += leds-sead3.o
|
||||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
|
||||
|
||||
|
|
|
|||
|
|
@ -1,49 +0,0 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/irqchip/mips-gic.h>
|
||||
|
||||
#include <asm/mips-boards/sead3int.h>
|
||||
|
||||
static struct resource ehci_resources[] = {
|
||||
{
|
||||
.start = 0x1b200000,
|
||||
.end = 0x1b200fff,
|
||||
.flags = IORESOURCE_MEM
|
||||
},
|
||||
{
|
||||
.flags = IORESOURCE_IRQ
|
||||
}
|
||||
};
|
||||
|
||||
static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
|
||||
|
||||
static struct platform_device ehci_device = {
|
||||
.name = "sead3-ehci",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.dma_mask = &sead3_usbdev_dma_mask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32)
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(ehci_resources),
|
||||
.resource = ehci_resources
|
||||
};
|
||||
|
||||
static int __init ehci_init(void)
|
||||
{
|
||||
if (gic_present)
|
||||
ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
|
||||
else
|
||||
ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
|
||||
return platform_device_register(&ehci_device);
|
||||
}
|
||||
|
||||
device_initcall(ehci_init);
|
||||
|
|
@ -1,89 +0,0 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#define LEDFLAGS(bits, shift) \
|
||||
((bits << 8) | (shift << 8))
|
||||
|
||||
#define LEDBITS(id, shift, bits) \
|
||||
.name = id #shift, \
|
||||
.flags = LEDFLAGS(bits, shift)
|
||||
|
||||
struct led_info led_data_info[] = {
|
||||
{ LEDBITS("bit", 0, 1) },
|
||||
{ LEDBITS("bit", 1, 1) },
|
||||
{ LEDBITS("bit", 2, 1) },
|
||||
{ LEDBITS("bit", 3, 1) },
|
||||
{ LEDBITS("bit", 4, 1) },
|
||||
{ LEDBITS("bit", 5, 1) },
|
||||
{ LEDBITS("bit", 6, 1) },
|
||||
{ LEDBITS("bit", 7, 1) },
|
||||
{ LEDBITS("all", 0, 8) },
|
||||
};
|
||||
|
||||
static struct led_platform_data led_data = {
|
||||
.num_leds = ARRAY_SIZE(led_data_info),
|
||||
.leds = led_data_info
|
||||
};
|
||||
|
||||
static struct resource pled_resources[] = {
|
||||
{
|
||||
.start = 0x1f000210,
|
||||
.end = 0x1f000217,
|
||||
.flags = IORESOURCE_MEM
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device pled_device = {
|
||||
.name = "sead3::pled",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &led_data,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(pled_resources),
|
||||
.resource = pled_resources
|
||||
};
|
||||
|
||||
|
||||
static struct resource fled_resources[] = {
|
||||
{
|
||||
.start = 0x1f000218,
|
||||
.end = 0x1f00021f,
|
||||
.flags = IORESOURCE_MEM
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device fled_device = {
|
||||
.name = "sead3::fled",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &led_data,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(fled_resources),
|
||||
.resource = fled_resources
|
||||
};
|
||||
|
||||
static struct platform_device sead3_led_device = {
|
||||
.name = "sead3-led",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
struct platform_device *sead3_led_devices[] = {
|
||||
&pled_device,
|
||||
&fled_device,
|
||||
&sead3_led_device,
|
||||
};
|
||||
|
||||
static int __init sead3_led_init(void)
|
||||
{
|
||||
return platform_add_devices(sead3_led_devices, ARRAY_SIZE(sead3_led_devices));
|
||||
}
|
||||
|
||||
device_initcall(sead3_led_init);
|
||||
|
|
@ -1,53 +0,0 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
|
||||
static struct mtd_partition sead3_mtd_partitions[] = {
|
||||
{
|
||||
.name = "User FS",
|
||||
.offset = 0x00000000,
|
||||
.size = 0x01fc0000,
|
||||
}, {
|
||||
.name = "Board Config",
|
||||
.offset = 0x01fc0000,
|
||||
.size = 0x00040000,
|
||||
.mask_flags = MTD_WRITEABLE
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data sead3_flash_data = {
|
||||
.width = 4,
|
||||
.nr_parts = ARRAY_SIZE(sead3_mtd_partitions),
|
||||
.parts = sead3_mtd_partitions
|
||||
};
|
||||
|
||||
static struct resource sead3_flash_resource = {
|
||||
.start = 0x1c000000,
|
||||
.end = 0x1dffffff,
|
||||
.flags = IORESOURCE_MEM
|
||||
};
|
||||
|
||||
static struct platform_device sead3_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &sead3_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &sead3_flash_resource,
|
||||
};
|
||||
|
||||
static int __init sead3_mtd_init(void)
|
||||
{
|
||||
platform_device_register(&sead3_flash);
|
||||
|
||||
return 0;
|
||||
}
|
||||
device_initcall(sead3_mtd_init);
|
||||
|
|
@ -1,53 +0,0 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/irqchip/mips-gic.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/smsc911x.h>
|
||||
|
||||
#include <asm/mips-boards/sead3int.h>
|
||||
|
||||
static struct smsc911x_platform_config sead3_smsc911x_data = {
|
||||
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
||||
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
||||
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
||||
.phy_interface = PHY_INTERFACE_MODE_MII,
|
||||
};
|
||||
|
||||
struct resource sead3_net_resources[] = {
|
||||
{
|
||||
.start = 0x1f010000,
|
||||
.end = 0x1f01ffff,
|
||||
.flags = IORESOURCE_MEM
|
||||
},
|
||||
{
|
||||
.flags = IORESOURCE_IRQ
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device sead3_net_device = {
|
||||
.name = "smsc911x",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &sead3_smsc911x_data,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(sead3_net_resources),
|
||||
.resource = sead3_net_resources
|
||||
};
|
||||
|
||||
static int __init sead3_net_init(void)
|
||||
{
|
||||
if (gic_present)
|
||||
sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
|
||||
else
|
||||
sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
|
||||
return platform_device_register(&sead3_net_device);
|
||||
}
|
||||
|
||||
device_initcall(sead3_net_init);
|
||||
|
|
@ -5,9 +5,15 @@
|
|||
*
|
||||
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
|
||||
*/
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/irqchip/mips-gic.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/smsc911x.h>
|
||||
|
||||
#include <asm/mips-boards/sead3int.h>
|
||||
|
||||
|
|
@ -35,16 +41,183 @@ static struct platform_device uart8250_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static int __init uart8250_init(void)
|
||||
static struct smsc911x_platform_config sead3_smsc911x_data = {
|
||||
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
||||
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
||||
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
||||
.phy_interface = PHY_INTERFACE_MODE_MII,
|
||||
};
|
||||
|
||||
static struct resource sead3_net_resources[] = {
|
||||
{
|
||||
.start = 0x1f010000,
|
||||
.end = 0x1f01ffff,
|
||||
.flags = IORESOURCE_MEM
|
||||
}, {
|
||||
.flags = IORESOURCE_IRQ
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device sead3_net_device = {
|
||||
.name = "smsc911x",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &sead3_smsc911x_data,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(sead3_net_resources),
|
||||
.resource = sead3_net_resources
|
||||
};
|
||||
|
||||
static struct mtd_partition sead3_mtd_partitions[] = {
|
||||
{
|
||||
.name = "User FS",
|
||||
.offset = 0x00000000,
|
||||
.size = 0x01fc0000,
|
||||
}, {
|
||||
.name = "Board Config",
|
||||
.offset = 0x01fc0000,
|
||||
.size = 0x00040000,
|
||||
.mask_flags = MTD_WRITEABLE
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data sead3_flash_data = {
|
||||
.width = 4,
|
||||
.nr_parts = ARRAY_SIZE(sead3_mtd_partitions),
|
||||
.parts = sead3_mtd_partitions
|
||||
};
|
||||
|
||||
static struct resource sead3_flash_resource = {
|
||||
.start = 0x1c000000,
|
||||
.end = 0x1dffffff,
|
||||
.flags = IORESOURCE_MEM
|
||||
};
|
||||
|
||||
static struct platform_device sead3_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &sead3_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &sead3_flash_resource,
|
||||
};
|
||||
|
||||
#define LEDFLAGS(bits, shift) \
|
||||
((bits << 8) | (shift << 8))
|
||||
|
||||
#define LEDBITS(id, shift, bits) \
|
||||
.name = id #shift, \
|
||||
.flags = LEDFLAGS(bits, shift)
|
||||
|
||||
static struct led_info led_data_info[] = {
|
||||
{ LEDBITS("bit", 0, 1) },
|
||||
{ LEDBITS("bit", 1, 1) },
|
||||
{ LEDBITS("bit", 2, 1) },
|
||||
{ LEDBITS("bit", 3, 1) },
|
||||
{ LEDBITS("bit", 4, 1) },
|
||||
{ LEDBITS("bit", 5, 1) },
|
||||
{ LEDBITS("bit", 6, 1) },
|
||||
{ LEDBITS("bit", 7, 1) },
|
||||
{ LEDBITS("all", 0, 8) },
|
||||
};
|
||||
|
||||
static struct led_platform_data led_data = {
|
||||
.num_leds = ARRAY_SIZE(led_data_info),
|
||||
.leds = led_data_info
|
||||
};
|
||||
|
||||
static struct resource pled_resources[] = {
|
||||
{
|
||||
.start = 0x1f000210,
|
||||
.end = 0x1f000217,
|
||||
.flags = IORESOURCE_MEM
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device pled_device = {
|
||||
.name = "sead3::pled",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &led_data,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(pled_resources),
|
||||
.resource = pled_resources
|
||||
};
|
||||
|
||||
|
||||
static struct resource fled_resources[] = {
|
||||
{
|
||||
.start = 0x1f000218,
|
||||
.end = 0x1f00021f,
|
||||
.flags = IORESOURCE_MEM
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device fled_device = {
|
||||
.name = "sead3::fled",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &led_data,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(fled_resources),
|
||||
.resource = fled_resources
|
||||
};
|
||||
|
||||
static struct platform_device sead3_led_device = {
|
||||
.name = "sead3-led",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
static struct resource ehci_resources[] = {
|
||||
{
|
||||
.start = 0x1b200000,
|
||||
.end = 0x1b200fff,
|
||||
.flags = IORESOURCE_MEM
|
||||
}, {
|
||||
.flags = IORESOURCE_IRQ
|
||||
}
|
||||
};
|
||||
|
||||
static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32);
|
||||
|
||||
static struct platform_device ehci_device = {
|
||||
.name = "sead3-ehci",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.dma_mask = &sead3_usbdev_dma_mask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32)
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(ehci_resources),
|
||||
.resource = ehci_resources
|
||||
};
|
||||
|
||||
static struct platform_device *sead3_platform_devices[] __initdata = {
|
||||
&uart8250_device,
|
||||
&sead3_flash,
|
||||
&pled_device,
|
||||
&fled_device,
|
||||
&sead3_led_device,
|
||||
&ehci_device,
|
||||
&sead3_net_device,
|
||||
};
|
||||
|
||||
static int __init sead3_platforms_device_init(void)
|
||||
{
|
||||
if (gic_present) {
|
||||
uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
|
||||
uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
|
||||
ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
|
||||
sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
|
||||
} else {
|
||||
uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
|
||||
uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
|
||||
ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
|
||||
sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
|
||||
}
|
||||
return platform_device_register(&uart8250_device);
|
||||
|
||||
return platform_add_devices(sead3_platform_devices,
|
||||
ARRAY_SIZE(sead3_platform_devices));
|
||||
}
|
||||
|
||||
device_initcall(uart8250_init);
|
||||
device_initcall(sead3_platforms_device_init);
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче