ixgbe: remove unneeded fdir pb alloc case

The packet buffer is correctly allocated by generic pb allocation
path in ixgbe_configure() there is no need to do the allocation
here as well.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
This commit is contained in:
John Fastabend 2011-07-18 22:38:30 +00:00 коммит произвёл Jeff Kirsher
Родитель 4fa2e0e178
Коммит 6172207634
1 изменённых файлов: 0 добавлений и 87 удалений

Просмотреть файл

@ -1107,79 +1107,6 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
return 0;
}
/**
* ixgbe_set_fdir_rxpba_82599 - Initialize Flow Director Rx packet buffer
* @hw: pointer to hardware structure
* @pballoc: which mode to allocate filters with
**/
static s32 ixgbe_set_fdir_rxpba_82599(struct ixgbe_hw *hw, const u32 pballoc)
{
u32 fdir_pbsize = hw->mac.rx_pb_size << IXGBE_RXPBSIZE_SHIFT;
u32 current_rxpbsize = 0;
int i;
/* reserve space for Flow Director filters */
switch (pballoc) {
case IXGBE_FDIR_PBALLOC_256K:
fdir_pbsize -= 256 << IXGBE_RXPBSIZE_SHIFT;
break;
case IXGBE_FDIR_PBALLOC_128K:
fdir_pbsize -= 128 << IXGBE_RXPBSIZE_SHIFT;
break;
case IXGBE_FDIR_PBALLOC_64K:
fdir_pbsize -= 64 << IXGBE_RXPBSIZE_SHIFT;
break;
case IXGBE_FDIR_PBALLOC_NONE:
default:
return IXGBE_ERR_PARAM;
}
/* determine current RX packet buffer size */
for (i = 0; i < 8; i++)
current_rxpbsize += IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
/* if there is already room for the filters do nothing */
if (current_rxpbsize <= fdir_pbsize)
return 0;
if (current_rxpbsize > hw->mac.rx_pb_size) {
/*
* if rxpbsize is greater than max then HW max the Rx buffer
* sizes are unconfigured or misconfigured since HW default is
* to give the full buffer to each traffic class resulting in
* the total size being buffer size 8x actual size
*
* This assumes no DCB since the RXPBSIZE registers appear to
* be unconfigured.
*/
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), fdir_pbsize);
for (i = 1; i < 8; i++)
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
} else {
/*
* Since the Rx packet buffer appears to have already been
* configured we need to shrink each packet buffer by enough
* to make room for the filters. As such we take each rxpbsize
* value and multiply it by a fraction representing the size
* needed over the size we currently have.
*
* We need to reduce fdir_pbsize and current_rxpbsize to
* 1/1024 of their original values in order to avoid
* overflowing the u32 being used to store rxpbsize.
*/
fdir_pbsize >>= IXGBE_RXPBSIZE_SHIFT;
current_rxpbsize >>= IXGBE_RXPBSIZE_SHIFT;
for (i = 0; i < 8; i++) {
u32 rxpbsize = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
rxpbsize *= fdir_pbsize;
rxpbsize /= current_rxpbsize;
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpbsize);
}
}
return 0;
}
/**
* ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
* @hw: pointer to hardware structure
@ -1227,13 +1154,6 @@ static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
**/
s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
s32 err;
/* Before enabling Flow Director, verify the Rx Packet Buffer size */
err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
if (err)
return err;
/*
* Continue setup of fdirctrl register bits:
* Move the flexible bytes to use the ethertype - shift 6 words
@ -1258,13 +1178,6 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
**/
s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
s32 err;
/* Before enabling Flow Director, verify the Rx Packet Buffer size */
err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
if (err)
return err;
/*
* Continue setup of fdirctrl register bits:
* Turn perfect match filtering on