r8169: enable wake on lan

Similar to 8139cp code but more inspired/lucky.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

drivers/net/r8169.c

@@ -290,7 +290,15 @@ enum RTL8169_register_content {
 	/* Config1 register p.24 */
 	PMEnable	= (1 << 0),	/* Power Management Enable */
 
+	/* Config3 register p.25 */
+	MagicPacket	= (1 << 5),	/* Wake up when receives a Magic Packet */
+	LinkUp		= (1 << 4),	/* Wake up when the cable connection is re-established */
+
 	/* Config5 register p.27 */
+	BWF		= (1 << 6),	/* Accept Broadcast wakeup frame */
+	MWF		= (1 << 5),	/* Accept Multicast wakeup frame */
+	UWF		= (1 << 4),	/* Accept Unicast wakeup frame */
+	LanWake		= (1 << 1),	/* LanWake enable/disable */
 	PMEStatus	= (1 << 0),	/* PME status can be reset by PCI RST# */
 
 	/* TBICSR p.28 */
@@ -439,6 +447,7 @@ struct rtl8169_private {
 	unsigned int (*phy_reset_pending)(void __iomem *);
 	unsigned int (*link_ok)(void __iomem *);
 	struct work_struct task;
+	unsigned wol_enabled : 1;
 };
 
 MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -613,6 +622,80 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex)
 	*duplex = p->duplex;
 }
 
+static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u8 options;
+
+	wol->wolopts = 0;
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+	wol->supported = WAKE_ANY;
+
+	spin_lock_irq(&tp->lock);
+
+	options = RTL_R8(Config1);
+	if (!(options & PMEnable))
+		goto out_unlock;
+
+	options = RTL_R8(Config3);
+	if (options & LinkUp)
+		wol->wolopts |= WAKE_PHY;
+	if (options & MagicPacket)
+		wol->wolopts |= WAKE_MAGIC;
+
+	options = RTL_R8(Config5);
+	if (options & UWF)
+		wol->wolopts |= WAKE_UCAST;
+	if (options & BWF)
+	        wol->wolopts |= WAKE_BCAST;
+	if (options & MWF)
+	        wol->wolopts |= WAKE_MCAST;
+
+out_unlock:
+	spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	int i;
+	static struct {
+		u32 opt;
+		u16 reg;
+		u8  mask;
+	} cfg[] = {
+		{ WAKE_ANY,   Config1, PMEnable },
+		{ WAKE_PHY,   Config3, LinkUp },
+		{ WAKE_MAGIC, Config3, MagicPacket },
+		{ WAKE_UCAST, Config5, UWF },
+		{ WAKE_BCAST, Config5, BWF },
+		{ WAKE_MCAST, Config5, MWF },
+		{ WAKE_ANY,   Config5, LanWake }
+	};
+
+	spin_lock_irq(&tp->lock);
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+	for (i = 0; i < ARRAY_SIZE(cfg); i++) {
+		u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
+		if (wol->wolopts & cfg[i].opt)
+			options |= cfg[i].mask;
+		RTL_W8(cfg[i].reg, options);
+	}
+
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
+	tp->wol_enabled = (wol->wolopts) ? 1 : 0;
+
+	spin_unlock_irq(&tp->lock);
+
+	return 0;
+}
+
 static void rtl8169_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
@@ -1031,6 +1114,8 @@ static struct ethtool_ops rtl8169_ethtool_ops = {
 	.get_tso		= ethtool_op_get_tso,
 	.set_tso		= ethtool_op_set_tso,
 	.get_regs		= rtl8169_get_regs,
+	.get_wol		= rtl8169_get_wol,
+	.set_wol		= rtl8169_set_wol,
 	.get_strings		= rtl8169_get_strings,
 	.get_stats_count	= rtl8169_get_stats_count,
 	.get_ethtool_stats	= rtl8169_get_ethtool_stats,
@@ -2692,6 +2777,7 @@ static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
 	spin_unlock_irq(&tp->lock);
 
 	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
 	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 out:
 	return 0;
@@ -2708,6 +2794,7 @@ static int rtl8169_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
+	pci_enable_wake(pdev, PCI_D0, 0);
 
 	rtl8169_schedule_work(dev, rtl8169_reset_task);
 out: