at86rf230: convert to gpio descriptors

There are no remaining in-tree users of the platform_data,
so this driver can be converted to using the simpler gpiod
interfaces.

Any out-of-tree users that rely on the platform data can
provide the data using the device_property and gpio_lookup
interfaces instead.

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230126162323.2986682-1-arnd@kernel.org
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

drivers/net/ieee802154/at86rf230.c

@@ -15,13 +15,12 @@
 #include <linux/jiffies.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/at86rf230.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/skbuff.h>
-#include <linux/of_gpio.h>
 #include <linux/ieee802154.h>
 
 #include <net/mac802154.h>
@@ -82,7 +81,7 @@ struct at86rf230_local {
 	struct ieee802154_hw *hw;
 	struct at86rf2xx_chip_data *data;
 	struct regmap *regmap;
-	int slp_tr;
+	struct gpio_desc *slp_tr;
 	bool sleep;
 
 	struct completion state_complete;
@@ -107,8 +106,8 @@ at86rf230_async_state_change(struct at86rf230_local *lp,
 static inline void
 at86rf230_sleep(struct at86rf230_local *lp)
 {
-	if (gpio_is_valid(lp->slp_tr)) {
-		gpio_set_value(lp->slp_tr, 1);
+	if (lp->slp_tr) {
+		gpiod_set_value(lp->slp_tr, 1);
 		usleep_range(lp->data->t_off_to_sleep,
 			     lp->data->t_off_to_sleep + 10);
 		lp->sleep = true;
@@ -118,8 +117,8 @@ at86rf230_sleep(struct at86rf230_local *lp)
 static inline void
 at86rf230_awake(struct at86rf230_local *lp)
 {
-	if (gpio_is_valid(lp->slp_tr)) {
-		gpio_set_value(lp->slp_tr, 0);
+	if (lp->slp_tr) {
+		gpiod_set_value(lp->slp_tr, 0);
 		usleep_range(lp->data->t_sleep_to_off,
 			     lp->data->t_sleep_to_off + 100);
 		lp->sleep = false;
@@ -204,9 +203,9 @@ at86rf230_write_subreg(struct at86rf230_local *lp,
 static inline void
 at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp)
 {
-	gpio_set_value(lp->slp_tr, 1);
+	gpiod_set_value(lp->slp_tr, 1);
 	udelay(1);
-	gpio_set_value(lp->slp_tr, 0);
+	gpiod_set_value(lp->slp_tr, 0);
 }
 
 static bool
@@ -819,7 +818,7 @@ at86rf230_write_frame_complete(void *context)
 
 	ctx->trx.len = 2;
 
-	if (gpio_is_valid(lp->slp_tr))
+	if (lp->slp_tr)
 		at86rf230_slp_tr_rising_edge(lp);
 	else
 		at86rf230_async_write_reg(lp, RG_TRX_STATE, STATE_BUSY_TX, ctx,
@@ -1415,32 +1414,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
 	return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
 }
 
-static int
-at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr,
-		    u8 *xtal_trim)
-{
-	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
-	int ret;
-
-	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
-		if (!pdata)
-			return -ENOENT;
-
-		*rstn = pdata->rstn;
-		*slp_tr = pdata->slp_tr;
-		*xtal_trim = pdata->xtal_trim;
-		return 0;
-	}
-
-	*rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
-	*slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
-	ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim);
-	if (ret < 0 && ret != -EINVAL)
-		return ret;
-
-	return 0;
-}
-
 static int
 at86rf230_detect_device(struct at86rf230_local *lp)
 {
@@ -1547,7 +1520,8 @@ static int at86rf230_probe(struct spi_device *spi)
 	struct ieee802154_hw *hw;
 	struct at86rf230_local *lp;
 	unsigned int status;
-	int rc, irq_type, rstn, slp_tr;
+	int rc, irq_type;
+	struct gpio_desc *rstn, *slp_tr;
 	u8 xtal_trim = 0;
 
 	if (!spi->irq) {
@@ -1555,32 +1529,26 @@ static int at86rf230_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim);
-	if (rc < 0) {
-		dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
+	rc = device_property_read_u8(&spi->dev, "xtal-trim", &xtal_trim);
+	if (rc < 0 && rc != -EINVAL) {
+		dev_err(&spi->dev, "failed to parse xtal-trim: %d\n", rc);
 		return rc;
 	}
 
-	if (gpio_is_valid(rstn)) {
-		rc = devm_gpio_request_one(&spi->dev, rstn,
-					   GPIOF_OUT_INIT_HIGH, "rstn");
-		if (rc)
-			return rc;
-	}
+	rstn = devm_gpiod_get_optional(&spi->dev, "rstn", GPIOD_OUT_HIGH);
+	if (IS_ERR(rstn))
+		return PTR_ERR(rstn);
 
-	if (gpio_is_valid(slp_tr)) {
-		rc = devm_gpio_request_one(&spi->dev, slp_tr,
-					   GPIOF_OUT_INIT_LOW, "slp_tr");
-		if (rc)
-			return rc;
-	}
+	slp_tr = devm_gpiod_get_optional(&spi->dev, "slp_tr", GPIOD_OUT_LOW);
+	if (IS_ERR(slp_tr))
+		return PTR_ERR(slp_tr);
 
 	/* Reset */
-	if (gpio_is_valid(rstn)) {
+	if (rstn) {
 		udelay(1);
-		gpio_set_value_cansleep(rstn, 0);
+		gpiod_set_value_cansleep(rstn, 0);
 		udelay(1);
-		gpio_set_value_cansleep(rstn, 1);
+		gpiod_set_value_cansleep(rstn, 1);
 		usleep_range(120, 240);
 	}
 
@@ -1682,7 +1650,7 @@ MODULE_DEVICE_TABLE(spi, at86rf230_device_id);
 static struct spi_driver at86rf230_driver = {
 	.id_table = at86rf230_device_id,
 	.driver = {
-		.of_match_table = of_match_ptr(at86rf230_of_match),
+		.of_match_table = at86rf230_of_match,
 		.name	= "at86rf230",
 	},
 	.probe      = at86rf230_probe,

include/linux/spi/at86rf230.h

@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AT86RF230/RF231 driver
- *
- * Copyright (C) 2009-2012 Siemens AG
- *
- * Written by:
- * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
- */
-#ifndef AT86RF230_H
-#define AT86RF230_H
-
-struct at86rf230_platform_data {
-	int rstn;
-	int slp_tr;
-	int dig2;
-	u8 xtal_trim;
-};
-
-#endif