From 47220f623c3216ca276bad517ed208ea2ffceaa2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 3 Jul 2009 13:08:28 +0900
Subject: [PATCH 1/8] sh: define PERF_COUNTER_INDEX_OFFSET.

Fixes up recent build breakage.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/perf_counter.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index 61c2b40c802c..d8e6bb9c0ccc 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -4,4 +4,6 @@
 /* SH only supports software counters through this interface. */
 static inline void set_perf_counter_pending(void) {}
 
+#define PERF_COUNTER_INDEX_OFFSET	0
+
 #endif /* __ASM_SH_PERF_COUNTER_H */

From 44e18e9eda1f5c318a888989d929188eea93c8dc Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 3 Jul 2009 08:39:34 +0000
Subject: [PATCH 2/8] sh-sci: update receive error handling for muxed irqs

This patch updates the receive error code for muxed
interrupts in the sh-sci driver.

Receive error interrupts may be generated by the hardware
if RE or REIE bits in SCSCR are set. Update the muxed
interrupt handling code to acknowledge error interrupts
if RE or REIE is set, instead of only acknowledging if
REIE is set.

Without this patch error interrupts may be generated but
never acked resulting in a "nobody cared" crash.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/serial/sh-sci.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 66f52674ca0c..12bd64684f12 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -707,12 +707,13 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 
 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
-	unsigned short ssr_status, scr_status;
+	unsigned short ssr_status, scr_status, err_enabled;
 	struct uart_port *port = ptr;
 	irqreturn_t ret = IRQ_NONE;
 
 	ssr_status = sci_in(port, SCxSR);
 	scr_status = sci_in(port, SCSCR);
+	err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
 
 	/* Tx Interrupt */
 	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
@@ -721,10 +722,10 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
 		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-	if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & 0x0080) && err_enabled)
 		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-	if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+	if ((ssr_status & 0x0010) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
 	return ret;

From 64614e66fbfcaa57598c1678d699520dfbf4f531 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 3 Jul 2009 09:12:46 +0000
Subject: [PATCH 3/8] usb: allow sh7724 to enable on-chip r8a66597

The sh7724 processor has two on-chip r8a66597 blocks, so add
it to the list of processors for SUPERH_ON_CHIP_R8A66597.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/usb/host/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1576a0520adf..0c03471f0d41 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -337,10 +337,10 @@ config USB_R8A66597_HCD
 
 config SUPERH_ON_CHIP_R8A66597
 	boolean "Enable SuperH on-chip R8A66597 USB"
-	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
+	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
 	help
 	   This driver enables support for the on-chip R8A66597 in the
-	   SH7366 and SH7723 processors.
+	   SH7366, SH7723 and SH7724 processors.
 
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"

From 9731f4a202f29ff402ea2ddad7ff6f3a559c0c82 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 3 Jul 2009 09:40:03 +0000
Subject: [PATCH 4/8] sh: add r8a66597 usb0 host to the se7724 board

Add USB host support for port CN27 on the Solution Engine 7724
board. The r8a66597-hcd driver is hooked up as a platform device
and some registers are configured to enable the USB host function.
The hardware driving the USB port is the on-chip USB0 block in
the sh7724 processor configured as USB host controller.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 38 +++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index c050a8d76dfd..8fed45a2fb85 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,6 +19,7 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
@@ -302,6 +303,34 @@ static struct platform_device sh_eth_device = {
 	.resource = sh_eth_resources,
 };
 
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -311,6 +340,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&ceu1_device,
 	&keysc_device,
 	&sh_eth_device,
+	&sh7724_usb0_host_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -364,6 +394,7 @@ static void __init sh_eth_init(void)
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
 
 #define SW41_A    0x0100
 #define SW41_B    0x0200
@@ -373,6 +404,7 @@ static void __init sh_eth_init(void)
 #define SW41_F    0x2000
 #define SW41_G    0x4000
 #define SW41_H    0x8000
+
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -385,6 +417,12 @@ static int __init devices_setup(void)
 		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
+	/* turn on USB clocks, use external clock */
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* enable USB0 port */
+	ctrl_outw(0x0600, 0xa40501d4);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);

From e33afddca174171a68d57476ead8947476ab9240 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 7 Jul 2009 11:24:32 +0900
Subject: [PATCH 5/8] video: sh_mobile_lcdcfb: Convert to framebuffer_alloc().

All fb_info structures need to be allocated with framebuffer_alloc() due
to special initialization. Switch over to it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/sh_mobile_lcdcfb.c | 40 +++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 16 deletions(-)

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index da983b720f08..8f24564f77b0 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -31,7 +31,7 @@ struct sh_mobile_lcdc_chan {
 	unsigned long enabled; /* ME and SE in LDCNT2R */
 	struct sh_mobile_lcdc_chan_cfg cfg;
 	u32 pseudo_palette[PALETTE_NR];
-	struct fb_info info;
+	struct fb_info *info;
 	dma_addr_t dma_handle;
 	struct fb_deferred_io defio;
 	struct scatterlist *sglist;
@@ -442,22 +442,22 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		/* set bpp format in PKF[4:0] */
 		tmp = lcdc_read_chan(ch, LDDFR);
 		tmp &= ~(0x0001001f);
-		tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0;
+		tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
 		lcdc_write_chan(ch, LDDFR, tmp);
 
 		/* point out our frame buffer */
-		lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start);
+		lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start);
 
 		/* set line size */
-		lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
+		lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length);
 
 		/* setup deferred io if SYS bus */
 		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
 		if (ch->ldmt1r_value & (1 << 12) && tmp) {
 			ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
 			ch->defio.delay = msecs_to_jiffies(tmp);
-			ch->info.fbdefio = &ch->defio;
-			fb_deferred_io_init(&ch->info);
+			ch->info->fbdefio = &ch->defio;
+			fb_deferred_io_init(ch->info);
 
 			/* one-shot mode */
 			lcdc_write_chan(ch, LDSM1R, 1);
@@ -503,12 +503,12 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 		 * flush frame, and wait for frame end interrupt
 		 * clean up deferred io and enable clock
 		 */
-		if (ch->info.fbdefio) {
+		if (ch->info->fbdefio) {
 			ch->frame_end = 0;
-			schedule_delayed_work(&ch->info.deferred_work, 0);
+			schedule_delayed_work(&ch->info->deferred_work, 0);
 			wait_event(ch->frame_end_wait, ch->frame_end);
-			fb_deferred_io_cleanup(&ch->info);
-			ch->info.fbdefio = NULL;
+			fb_deferred_io_cleanup(ch->info);
+			ch->info->fbdefio = NULL;
 			sh_mobile_lcdc_clk_on(priv);
 		}
 
@@ -817,9 +817,16 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 	priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
 
 	for (i = 0; i < j; i++) {
-		info = &priv->ch[i].info;
 		cfg = &priv->ch[i].cfg;
 
+		priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
+		if (!priv->ch[i].info) {
+			dev_err(&pdev->dev, "unable to allocate fb_info\n");
+			error = -ENOMEM;
+			break;
+		}
+
+		info = priv->ch[i].info;
 		info->fbops = &sh_mobile_lcdc_ops;
 		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
 		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
@@ -872,7 +879,7 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 	for (i = 0; i < j; i++) {
 		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
 
-		info = &ch->info;
+		info = ch->info;
 
 		if (info->fbdefio) {
 			priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
@@ -915,15 +922,15 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
-		if (priv->ch[i].info.dev)
-			unregister_framebuffer(&priv->ch[i].info);
+		if (priv->ch[i].info->dev)
+			unregister_framebuffer(priv->ch[i].info);
 
 	sh_mobile_lcdc_stop(priv);
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
-		info = &priv->ch[i].info;
+		info = priv->ch[i].info;
 
-		if (!info->device)
+		if (!info || !info->device)
 			continue;
 
 		if (priv->ch[i].sglist)
@@ -932,6 +939,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 		dma_free_coherent(&pdev->dev, info->fix.smem_len,
 				  info->screen_base, priv->ch[i].dma_handle);
 		fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
 	}
 
 #ifdef CONFIG_HAVE_CLK

From 684dcd056178a04374c71459dbd2b18c6d958ef7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 7 Jul 2009 11:44:56 +0900
Subject: [PATCH 6/8] video: hitfb: Convert to framebuffer_alloc().

Follows the sh_mobile_lcdcfb change.

Also fixes up a memory leak with cmap allocation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/hitfb.c | 49 ++++++++++++++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 14 deletions(-)

diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 020db7fc9153..3ae896d55a58 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -44,9 +44,6 @@ static struct fb_fix_screeninfo hitfb_fix __initdata = {
 	.accel		= FB_ACCEL_NONE,
 };
 
-static u32 pseudo_palette[16];
-static struct fb_info fb_info;
-
 static inline void hitfb_accel_wait(void)
 {
 	while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ;
@@ -331,6 +328,8 @@ static struct fb_ops hitfb_ops = {
 static int __init hitfb_probe(struct platform_device *dev)
 {
 	unsigned short lcdclor, ldr3, ldvndr;
+	struct fb_info *info;
+	int ret;
 
 	if (fb_get_options("hitfb", NULL))
 		return -ENODEV;
@@ -384,28 +383,50 @@ static int __init hitfb_probe(struct platform_device *dev)
 		break;
 	}
 
-	fb_info.fbops = &hitfb_ops;
-	fb_info.var = hitfb_var;
-	fb_info.fix = hitfb_fix;
-	fb_info.pseudo_palette = pseudo_palette;
-	fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+	info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev);
+	if (unlikely(!info))
+		return -ENOMEM;
+
+	info->fbops = &hitfb_ops;
+	info->var = hitfb_var;
+	info->fix = hitfb_fix;
+	info->pseudo_palette = info->par;
+	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
 		FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
 
-	fb_info.screen_base = (void *)hitfb_fix.smem_start;
+	info->screen_base = (void *)hitfb_fix.smem_start;
 
-	fb_alloc_cmap(&fb_info.cmap, 256, 0);
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (unlikely(ret < 0))
+		goto err_fb;
 
-	if (register_framebuffer(&fb_info) < 0)
-		return -EINVAL;
+	ret = register_framebuffer(info);
+	if (unlikely(ret < 0))
+		goto err;
+
+	platform_set_drvdata(dev, info);
 
 	printk(KERN_INFO "fb%d: %s frame buffer device\n",
-	       fb_info.node, fb_info.fix.id);
+	       info->node, info->fix.id);
+
 	return 0;
+
+err:
+	fb_dealloc_cmap(&info->cmap);
+err_fb:
+	framebuffer_release(info);
+	return ret;
 }
 
 static int __exit hitfb_remove(struct platform_device *dev)
 {
-	return unregister_framebuffer(&fb_info);
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	unregister_framebuffer(info);
+	fb_dealloc_cmap(&info->cmap);
+	framebuffer_release(info);
+
+	return 0;
 }
 
 #ifdef CONFIG_PM

From 2dbc8a23cc2e677422f6dea991aca4e3d31ab65f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 7 Jul 2009 11:50:57 +0900
Subject: [PATCH 7/8] video: hitfb: Move over to dev_pm_ops.

A trivial update to move hitfb over to dev_pm_ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/video/hitfb.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 3ae896d55a58..e7116a6d82d3 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -429,8 +429,7 @@ static int __exit hitfb_remove(struct platform_device *dev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
+static int hitfb_suspend(struct device *dev)
 {
 	u16 v;
 
@@ -442,7 +441,7 @@ static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int hitfb_resume(struct platform_device *dev)
+static int hitfb_resume(struct device *dev)
 {
 	u16 v;
 
@@ -456,17 +455,19 @@ static int hitfb_resume(struct platform_device *dev)
 
 	return 0;
 }
-#endif
+
+static struct dev_pm_ops hitfb_dev_pm_ops = {
+	.suspend	= hitfb_suspend,
+	.resume		= hitfb_resume,
+};
 
 static struct platform_driver hitfb_driver = {
 	.probe		= hitfb_probe,
 	.remove		= __exit_p(hitfb_remove),
-#ifdef CONFIG_PM
-	.suspend	= hitfb_suspend,
-	.resume		= hitfb_resume,
-#endif
 	.driver		= {
 		.name	= "hitfb",
+		.owner	= THIS_MODULE,
+		.pm	= &hitfb_dev_pm_ops,
 	},
 };
 

From dd4da3a55f99efbfd46674ebefdcc2878a57ef2a Mon Sep 17 00:00:00 2001
From: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Date: Tue, 7 Jul 2009 05:32:07 +0000
Subject: [PATCH 8/8] serial: sh-sci: fix sci interrupt handler

Fix up the error bit handling on SCI ports.

Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/serial/sh-sci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 12bd64684f12..8e2feb563347 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -716,16 +716,16 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
 
 	/* Tx Interrupt */
-	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+	if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
 		ret = sci_tx_interrupt(irq, ptr);
 	/* Rx Interrupt */
-	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+	if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
 		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-	if ((ssr_status & 0x0080) && err_enabled)
+	if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
 		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-	if ((ssr_status & 0x0010) && err_enabled)
+	if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
 	return ret;