diff --git a/CREDITS b/CREDITS index 4fc997d58ab2..4c7738f49357 100644 --- a/CREDITS +++ b/CREDITS @@ -655,6 +655,11 @@ S: Stanford University S: Stanford, California 94305 S: USA +N: Carlos Chinea +E: carlos.chinea@nokia.com +E: cch.devel@gmail.com +D: Author of HSI Subsystem + N: Randolph Chung E: tausq@debian.org D: Linux/PA-RISC hacker diff --git a/Documentation/ABI/stable/sysfs-driver-ib_srp b/Documentation/ABI/stable/sysfs-driver-ib_srp index 5c53d28f775c..b9688de8455b 100644 --- a/Documentation/ABI/stable/sysfs-driver-ib_srp +++ b/Documentation/ABI/stable/sysfs-driver-ib_srp @@ -61,6 +61,12 @@ Description: Interface for making ib_srp connect to a new target. interrupt is handled by a different CPU then the comp_vector parameter can be used to spread the SRP completion workload over multiple CPU's. + * tl_retry_count, a number in the range 2..7 specifying the + IB RC retry count. + * queue_size, the maximum number of commands that the + initiator is allowed to queue per SCSI host. The default + value for this parameter is 62. The lowest supported value + is 2. What: /sys/class/infiniband_srp/srp--/ibdev Date: January 2, 2006 @@ -153,6 +159,13 @@ Contact: linux-rdma@vger.kernel.org Description: InfiniBand service ID used for establishing communication with the SRP target. +What: /sys/class/scsi_host/host/sgid +Date: February 1, 2014 +KernelVersion: 3.13 +Contact: linux-rdma@vger.kernel.org +Description: InfiniBand GID of the source port used for communication with + the SRP target. + What: /sys/class/scsi_host/host/zero_req_lim Date: September 20, 2006 KernelVersion: 2.6.18 diff --git a/Documentation/ABI/stable/sysfs-transport-srp b/Documentation/ABI/stable/sysfs-transport-srp index b36fb0dc13c8..ec7af69fea0a 100644 --- a/Documentation/ABI/stable/sysfs-transport-srp +++ b/Documentation/ABI/stable/sysfs-transport-srp @@ -5,6 +5,24 @@ Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org Description: Instructs an SRP initiator to disconnect from a target and to remove all LUNs imported from that target. +What: /sys/class/srp_remote_ports/port-:/dev_loss_tmo +Date: February 1, 2014 +KernelVersion: 3.13 +Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org +Description: Number of seconds the SCSI layer will wait after a transport + layer error has been observed before removing a target port. + Zero means immediate removal. Setting this attribute to "off" + will disable the dev_loss timer. + +What: /sys/class/srp_remote_ports/port-:/fast_io_fail_tmo +Date: February 1, 2014 +KernelVersion: 3.13 +Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org +Description: Number of seconds the SCSI layer will wait after a transport + layer error has been observed before failing I/O. Zero means + failing I/O immediately. Setting this attribute to "off" will + disable the fast_io_fail timer. + What: /sys/class/srp_remote_ports/port-:/port_id Date: June 27, 2007 KernelVersion: 2.6.24 @@ -12,8 +30,29 @@ Contact: linux-scsi@vger.kernel.org Description: 16-byte local SRP port identifier in hexadecimal format. An example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00. +What: /sys/class/srp_remote_ports/port-:/reconnect_delay +Date: February 1, 2014 +KernelVersion: 3.13 +Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org +Description: Number of seconds the SCSI layer will wait after a reconnect + attempt failed before retrying. Setting this attribute to + "off" will disable time-based reconnecting. + What: /sys/class/srp_remote_ports/port-:/roles Date: June 27, 2007 KernelVersion: 2.6.24 Contact: linux-scsi@vger.kernel.org Description: Role of the remote port. Either "SRP Initiator" or "SRP Target". + +What: /sys/class/srp_remote_ports/port-:/state +Date: February 1, 2014 +KernelVersion: 3.13 +Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org +Description: State of the transport layer used for communication with the + remote port. "running" if the transport layer is operational; + "blocked" if a transport layer error has been encountered but + the fast_io_fail_tmo timer has not yet fired; "fail-fast" + after the fast_io_fail_tmo timer has fired and before the + "dev_loss_tmo" timer has fired; "lost" after the + "dev_loss_tmo" timer has fired and before the port is finally + removed. diff --git a/Documentation/Changes b/Documentation/Changes index b17580885273..07c75d18154e 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode as root before you can use this. You'll probably also want to get the user-space microcode_ctl utility to use with this. -Powertweak ----------- - -If you are running v0.1.17 or earlier, you should upgrade to -version v0.99.0 or higher. Running old versions may cause problems -with programs using shared memory. - udev ---- udev is a userspace application for populating /dev dynamically with @@ -366,10 +359,6 @@ Intel P6 microcode ------------------ o -Powertweak ----------- -o - udev ---- o diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 6c9d9d37c83a..f5170082bdb3 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -58,7 +58,7 @@ Wait queues and Wake events !Iinclude/linux/wait.h -!Ekernel/wait.c +!Ekernel/sched/wait.c High-resolution timers !Iinclude/linux/ktime.h diff --git a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml index e287c8fc803b..4165e7bfa4ff 100644 --- a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml @@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active format. For the single-planar API, applications must set plane to zero. Additional flags may be posted in the flags field. Refer to a manual for open() for details. -Currently only O_CLOEXEC is supported. All other fields must be set to zero. +Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All +other fields must be set to zero. In the case of multi-planar API, every plane is exported separately using multiple VIDIOC_EXPBUF calls. @@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. __u32 flags Flags for the newly created file, currently only -O_CLOEXEC is supported, refer to the manual of open() for more -details. +O_CLOEXEC , O_RDONLY, O_WRONLY +, and O_RDWR are supported, refer to the manual +of open() for more details. __s32 diff --git a/Documentation/assoc_array.txt b/Documentation/assoc_array.txt new file mode 100644 index 000000000000..2f2c6cdd73c0 --- /dev/null +++ b/Documentation/assoc_array.txt @@ -0,0 +1,574 @@ + ======================================== + GENERIC ASSOCIATIVE ARRAY IMPLEMENTATION + ======================================== + +Contents: + + - Overview. + + - The public API. + - Edit script. + - Operations table. + - Manipulation functions. + - Access functions. + - Index key form. + + - Internal workings. + - Basic internal tree layout. + - Shortcuts. + - Splitting and collapsing nodes. + - Non-recursive iteration. + - Simultaneous alteration and iteration. + + +======== +OVERVIEW +======== + +This associative array implementation is an object container with the following +properties: + + (1) Objects are opaque pointers. The implementation does not care where they + point (if anywhere) or what they point to (if anything). + + [!] NOTE: Pointers to objects _must_ be zero in the least significant bit. + + (2) Objects do not need to contain linkage blocks for use by the array. This + permits an object to be located in multiple arrays simultaneously. + Rather, the array is made up of metadata blocks that point to objects. + + (3) Objects require index keys to locate them within the array. + + (4) Index keys must be unique. Inserting an object with the same key as one + already in the array will replace the old object. + + (5) Index keys can be of any length and can be of different lengths. + + (6) Index keys should encode the length early on, before any variation due to + length is seen. + + (7) Index keys can include a hash to scatter objects throughout the array. + + (8) The array can iterated over. The objects will not necessarily come out in + key order. + + (9) The array can be iterated over whilst it is being modified, provided the + RCU readlock is being held by the iterator. Note, however, under these + circumstances, some objects may be seen more than once. If this is a + problem, the iterator should lock against modification. Objects will not + be missed, however, unless deleted. + +(10) Objects in the array can be looked up by means of their index key. + +(11) Objects can be looked up whilst the array is being modified, provided the + RCU readlock is being held by the thread doing the look up. + +The implementation uses a tree of 16-pointer nodes internally that are indexed +on each level by nibbles from the index key in the same manner as in a radix +tree. To improve memory efficiency, shortcuts can be emplaced to skip over +what would otherwise be a series of single-occupancy nodes. Further, nodes +pack leaf object pointers into spare space in the node rather than making an +extra branch until as such time an object needs to be added to a full node. + + +============== +THE PUBLIC API +============== + +The public API can be found in . The associative array is +rooted on the following structure: + + struct assoc_array { + ... + }; + +The code is selected by enabling CONFIG_ASSOCIATIVE_ARRAY. + + +EDIT SCRIPT +----------- + +The insertion and deletion functions produce an 'edit script' that can later be +applied to effect the changes without risking ENOMEM. This retains the +preallocated metadata blocks that will be installed in the internal tree and +keeps track of the metadata blocks that will be removed from the tree when the +script is applied. + +This is also used to keep track of dead blocks and dead objects after the +script has been applied so that they can be freed later. The freeing is done +after an RCU grace period has passed - thus allowing access functions to +proceed under the RCU read lock. + +The script appears as outside of the API as a pointer of the type: + + struct assoc_array_edit; + +There are two functions for dealing with the script: + + (1) Apply an edit script. + + void assoc_array_apply_edit(struct assoc_array_edit *edit); + + This will perform the edit functions, interpolating various write barriers + to permit accesses under the RCU read lock to continue. The edit script + will then be passed to call_rcu() to free it and any dead stuff it points + to. + + (2) Cancel an edit script. + + void assoc_array_cancel_edit(struct assoc_array_edit *edit); + + This frees the edit script and all preallocated memory immediately. If + this was for insertion, the new object is _not_ released by this function, + but must rather be released by the caller. + +These functions are guaranteed not to fail. + + +OPERATIONS TABLE +---------------- + +Various functions take a table of operations: + + struct assoc_array_ops { + ... + }; + +This points to a number of methods, all of which need to be provided: + + (1) Get a chunk of index key from caller data: + + unsigned long (*get_key_chunk)(const void *index_key, int level); + + This should return a chunk of caller-supplied index key starting at the + *bit* position given by the level argument. The level argument will be a + multiple of ASSOC_ARRAY_KEY_CHUNK_SIZE and the function should return + ASSOC_ARRAY_KEY_CHUNK_SIZE bits. No error is possible. + + + (2) Get a chunk of an object's index key. + + unsigned long (*get_object_key_chunk)(const void *object, int level); + + As the previous function, but gets its data from an object in the array + rather than from a caller-supplied index key. + + + (3) See if this is the object we're looking for. + + bool (*compare_object)(const void *object, const void *index_key); + + Compare the object against an index key and return true if it matches and + false if it doesn't. + + + (4) Diff the index keys of two objects. + + int (*diff_objects)(const void *object, const void *index_key); + + Return the bit position at which the index key of the specified object + differs from the given index key or -1 if they are the same. + + + (5) Free an object. + + void (*free_object)(void *object); + + Free the specified object. Note that this may be called an RCU grace + period after assoc_array_apply_edit() was called, so synchronize_rcu() may + be necessary on module unloading. + + +MANIPULATION FUNCTIONS +---------------------- + +There are a number of functions for manipulating an associative array: + + (1) Initialise an associative array. + + void assoc_array_init(struct assoc_array *array); + + This initialises the base structure for an associative array. It can't + fail. + + + (2) Insert/replace an object in an associative array. + + struct assoc_array_edit * + assoc_array_insert(struct assoc_array *array, + const struct assoc_array_ops *ops, + const void *index_key, + void *object); + + This inserts the given object into the array. Note that the least + significant bit of the pointer must be zero as it's used to type-mark + pointers internally. + + If an object already exists for that key then it will be replaced with the + new object and the old one will be freed automatically. + + The index_key argument should hold index key information and is + passed to the methods in the ops table when they are called. + + This function makes no alteration to the array itself, but rather returns + an edit script that must be applied. -ENOMEM is returned in the case of + an out-of-memory error. + + The caller should lock exclusively against other modifiers of the array. + + + (3) Delete an object from an associative array. + + struct assoc_array_edit * + assoc_array_delete(struct assoc_array *array, + const struct assoc_array_ops *ops, + const void *index_key); + + This deletes an object that matches the specified data from the array. + + The index_key argument should hold index key information and is + passed to the methods in the ops table when they are called. + + This function makes no alteration to the array itself, but rather returns + an edit script that must be applied. -ENOMEM is returned in the case of + an out-of-memory error. NULL will be returned if the specified object is + not found within the array. + + The caller should lock exclusively against other modifiers of the array. + + + (4) Delete all objects from an associative array. + + struct assoc_array_edit * + assoc_array_clear(struct assoc_array *array, + const struct assoc_array_ops *ops); + + This deletes all the objects from an associative array and leaves it + completely empty. + + This function makes no alteration to the array itself, but rather returns + an edit script that must be applied. -ENOMEM is returned in the case of + an out-of-memory error. + + The caller should lock exclusively against other modifiers of the array. + + + (5) Destroy an associative array, deleting all objects. + + void assoc_array_destroy(struct assoc_array *array, + const struct assoc_array_ops *ops); + + This destroys the contents of the associative array and leaves it + completely empty. It is not permitted for another thread to be traversing + the array under the RCU read lock at the same time as this function is + destroying it as no RCU deferral is performed on memory release - + something that would require memory to be allocated. + + The caller should lock exclusively against other modifiers and accessors + of the array. + + + (6) Garbage collect an associative array. + + int assoc_array_gc(struct assoc_array *array, + const struct assoc_array_ops *ops, + bool (*iterator)(void *object, void *iterator_data), + void *iterator_data); + + This iterates over the objects in an associative array and passes each one + to iterator(). If iterator() returns true, the object is kept. If it + returns false, the object will be freed. If the iterator() function + returns true, it must perform any appropriate refcount incrementing on the + object before returning. + + The internal tree will be packed down if possible as part of the iteration + to reduce the number of nodes in it. + + The iterator_data is passed directly to iterator() and is otherwise + ignored by the function. + + The function will return 0 if successful and -ENOMEM if there wasn't + enough memory. + + It is possible for other threads to iterate over or search the array under + the RCU read lock whilst this function is in progress. The caller should + lock exclusively against other modifiers of the array. + + +ACCESS FUNCTIONS +---------------- + +There are two functions for accessing an associative array: + + (1) Iterate over all the objects in an associative array. + + int assoc_array_iterate(const struct assoc_array *array, + int (*iterator)(const void *object, + void *iterator_data), + void *iterator_data); + + This passes each object in the array to the iterator callback function. + iterator_data is private data for that function. + + This may be used on an array at the same time as the array is being + modified, provided the RCU read lock is held. Under such circumstances, + it is possible for the iteration function to see some objects twice. If + this is a problem, then modification should be locked against. The + iteration algorithm should not, however, miss any objects. + + The function will return 0 if no objects were in the array or else it will + return the result of the last iterator function called. Iteration stops + immediately if any call to the iteration function results in a non-zero + return. + + + (2) Find an object in an associative array. + + void *assoc_array_find(const struct assoc_array *array, + const struct assoc_array_ops *ops, + const void *index_key); + + This walks through the array's internal tree directly to the object + specified by the index key.. + + This may be used on an array at the same time as the array is being + modified, provided the RCU read lock is held. + + The function will return the object if found (and set *_type to the object + type) or will return NULL if the object was not found. + + +INDEX KEY FORM +-------------- + +The index key can be of any form, but since the algorithms aren't told how long +the key is, it is strongly recommended that the index key includes its length +very early on before any variation due to the length would have an effect on +comparisons. + +This will cause leaves with different length keys to scatter away from each +other - and those with the same length keys to cluster together. + +It is also recommended that the index key begin with a hash of the rest of the +key to maximise scattering throughout keyspace. + +The better the scattering, the wider and lower the internal tree will be. + +Poor scattering isn't too much of a problem as there are shortcuts and nodes +can contain mixtures of leaves and metadata pointers. + +The index key is read in chunks of machine word. Each chunk is subdivided into +one nibble (4 bits) per level, so on a 32-bit CPU this is good for 8 levels and +on a 64-bit CPU, 16 levels. Unless the scattering is really poor, it is +unlikely that more than one word of any particular index key will have to be +used. + + +================= +INTERNAL WORKINGS +================= + +The associative array data structure has an internal tree. This tree is +constructed of two types of metadata blocks: nodes and shortcuts. + +A node is an array of slots. Each slot can contain one of four things: + + (*) A NULL pointer, indicating that the slot is empty. + + (*) A pointer to an object (a leaf). + + (*) A pointer to a node at the next level. + + (*) A pointer to a shortcut. + + +BASIC INTERNAL TREE LAYOUT +-------------------------- + +Ignoring shortcuts for the moment, the nodes form a multilevel tree. The index +key space is strictly subdivided by the nodes in the tree and nodes occur on +fixed levels. For example: + + Level: 0 1 2 3 + =============== =============== =============== =============== + NODE D + NODE B NODE C +------>+---+ + +------>+---+ +------>+---+ | | 0 | + NODE A | | 0 | | | 0 | | +---+ + +---+ | +---+ | +---+ | : : + | 0 | | : : | : : | +---+ + +---+ | +---+ | +---+ | | f | + | 1 |---+ | 3 |---+ | 7 |---+ +---+ + +---+ +---+ +---+ + : : : : | 8 |---+ + +---+ +---+ +---+ | NODE E + | e |---+ | f | : : +------>+---+ + +---+ | +---+ +---+ | 0 | + | f | | | f | +---+ + +---+ | +---+ : : + | NODE F +---+ + +------>+---+ | f | + | 0 | NODE G +---+ + +---+ +------>+---+ + : : | | 0 | + +---+ | +---+ + | 6 |---+ : : + +---+ +---+ + : : | f | + +---+ +---+ + | f | + +---+ + +In the above example, there are 7 nodes (A-G), each with 16 slots (0-f). +Assuming no other meta data nodes in the tree, the key space is divided thusly: + + KEY PREFIX NODE + ========== ==== + 137* D + 138* E + 13[0-69-f]* C + 1[0-24-f]* B + e6* G + e[0-57-f]* F + [02-df]* A + +So, for instance, keys with the following example index keys will be found in +the appropriate nodes: + + INDEX KEY PREFIX NODE + =============== ======= ==== + 13694892892489 13 C + 13795289025897 137 D + 13889dde88793 138 E + 138bbb89003093 138 E + 1394879524789 12 C + 1458952489 1 B + 9431809de993ba - A + b4542910809cd - A + e5284310def98 e F + e68428974237 e6 G + e7fffcbd443 e F + f3842239082 - A + +To save memory, if a node can hold all the leaves in its portion of keyspace, +then the node will have all those leaves in it and will not have any metadata +pointers - even if some of those leaves would like to be in the same slot. + +A node can contain a heterogeneous mix of leaves and metadata pointers. +Metadata pointers must be in the slots that match their subdivisions of key +space. The leaves can be in any slot not occupied by a metadata pointer. It +is guaranteed that none of the leaves in a node will match a slot occupied by a +metadata pointer. If the metadata pointer is there, any leaf whose key matches +the metadata key prefix must be in the subtree that the metadata pointer points +to. + +In the above example list of index keys, node A will contain: + + SLOT CONTENT INDEX KEY (PREFIX) + ==== =============== ================== + 1 PTR TO NODE B 1* + any LEAF 9431809de993ba + any LEAF b4542910809cd + e PTR TO NODE F e* + any LEAF f3842239082 + +and node B: + + 3 PTR TO NODE C 13* + any LEAF 1458952489 + + +SHORTCUTS +--------- + +Shortcuts are metadata records that jump over a piece of keyspace. A shortcut +is a replacement for a series of single-occupancy nodes ascending through the +levels. Shortcuts exist to save memory and to speed up traversal. + +It is possible for the root of the tree to be a shortcut - say, for example, +the tree contains at least 17 nodes all with key prefix '1111'. The insertion +algorithm will insert a shortcut to skip over the '1111' keyspace in a single +bound and get to the fourth level where these actually become different. + + +SPLITTING AND COLLAPSING NODES +------------------------------ + +Each node has a maximum capacity of 16 leaves and metadata pointers. If the +insertion algorithm finds that it is trying to insert a 17th object into a +node, that node will be split such that at least two leaves that have a common +key segment at that level end up in a separate node rooted on that slot for +that common key segment. + +If the leaves in a full node and the leaf that is being inserted are +sufficiently similar, then a shortcut will be inserted into the tree. + +When the number of objects in the subtree rooted at a node falls to 16 or +fewer, then the subtree will be collapsed down to a single node - and this will +ripple towards the root if possible. + + +NON-RECURSIVE ITERATION +----------------------- + +Each node and shortcut contains a back pointer to its parent and the number of +slot in that parent that points to it. None-recursive iteration uses these to +proceed rootwards through the tree, going to the parent node, slot N + 1 to +make sure progress is made without the need for a stack. + +The backpointers, however, make simultaneous alteration and iteration tricky. + + +SIMULTANEOUS ALTERATION AND ITERATION +------------------------------------- + +There are a number of cases to consider: + + (1) Simple insert/replace. This involves simply replacing a NULL or old + matching leaf pointer with the pointer to the new leaf after a barrier. + The metadata blocks don't change otherwise. An old leaf won't be freed + until after the RCU grace period. + + (2) Simple delete. This involves just clearing an old matching leaf. The + metadata blocks don't change otherwise. The old leaf won't be freed until + after the RCU grace period. + + (3) Insertion replacing part of a subtree that we haven't yet entered. This + may involve replacement of part of that subtree - but that won't affect + the iteration as we won't have reached the pointer to it yet and the + ancestry blocks are not replaced (the layout of those does not change). + + (4) Insertion replacing nodes that we're actively processing. This isn't a + problem as we've passed the anchoring pointer and won't switch onto the + new layout until we follow the back pointers - at which point we've + already examined the leaves in the replaced node (we iterate over all the + leaves in a node before following any of its metadata pointers). + + We might, however, re-see some leaves that have been split out into a new + branch that's in a slot further along than we were at. + + (5) Insertion replacing nodes that we're processing a dependent branch of. + This won't affect us until we follow the back pointers. Similar to (4). + + (6) Deletion collapsing a branch under us. This doesn't affect us because the + back pointers will get us back to the parent of the new node before we + could see the new node. The entire collapsed subtree is thrown away + unchanged - and will still be rooted on the same slot, so we shouldn't + process it a second time as we'll go back to slot + 1. + +Note: + + (*) Under some circumstances, we need to simultaneously change the parent + pointer and the parent slot pointer on a node (say, for example, we + inserted another node before it and moved it up a level). We cannot do + this without locking against a read - so we have to replace that node too. + + However, when we're changing a shortcut into a node this isn't a problem + as shortcuts only have one slot and so the parent slot number isn't used + when traversing backwards over one. This means that it's okay to change + the slot number first - provided suitable barriers are used to make sure + the parent slot number is read after the back pointer. + +Obsolete blocks and leaves are freed up after an RCU grace period has passed, +so as long as anyone doing walking or iteration holds the RCU read lock, the +old superstructure should not go away on them. diff --git a/Documentation/devicetree/bindings/arc/pmu.txt b/Documentation/devicetree/bindings/arc/pmu.txt new file mode 100644 index 000000000000..49d517340de3 --- /dev/null +++ b/Documentation/devicetree/bindings/arc/pmu.txt @@ -0,0 +1,24 @@ +* ARC Performance Monitor Unit + +The ARC 700 can be configured with a pipeline performance monitor for counting +CPU and cache events like cache misses and hits. + +Note that: + * ARC 700 refers to a family of ARC processor cores; + - There is only one type of PMU available for the whole family; + - The PMU may support different sets of events; supported events are probed + at boot time, as required by the reference manual. + + * The ARC 700 PMU does not support interrupts; although HW events may be + counted, the HW events themselves cannot serve as a trigger for a sample. + +Required properties: + +- compatible : should contain + "snps,arc700-pmu" + +Example: + +pmu { + compatible = "snps,arc700-pmu"; +}; diff --git a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt index f770ac0893d4..049675944b78 100644 --- a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt +++ b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt @@ -1,7 +1,9 @@ Calxeda DDR memory controller Properties: -- compatible : Should be "calxeda,hb-ddr-ctrl" +- compatible : Should be: + - "calxeda,hb-ddr-ctrl" for ECX-1000 + - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000 - reg : Address and size for DDR controller registers. - interrupts : Interrupt for DDR controller. diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index 1a5a42ce21bb..83f405bde138 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM. Required properties: - compatible : Should be "ti,omap3-mpu" for OMAP3 Should be "ti,omap4-mpu" for OMAP4 + Should be "ti,omap5-mpu" for OMAP5 - ti,hwmods: "mpu" Examples: +- For an OMAP5 SMP system: + +mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu" +}; + - For an OMAP4 SMP system: mpu { diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 343781b9f246..3e1e498fea96 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,6 +7,7 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "arm,armv8-pmuv3" "arm,cortex-a15-pmu" "arm,cortex-a9-pmu" "arm,cortex-a8-pmu" diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 47ada1dff216..5d49f2b37f68 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -49,7 +49,7 @@ adc@12D10000 { /* NTC thermistor is a hwmon device */ ncp15wb473@0 { compatible = "ntc,ncp15wb473"; - pullup-uV = <1800000>; + pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index c6bf8a6c8f52..a2ac2d9ac71a 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -6,7 +6,7 @@ SoC's in the Exynos4 family. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 24765c146e31..46f5c791ea0d 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index 32aa34ecad36..458f34789e5d 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 4499e9966bc9..9955dc9c7d96 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC. Required Properties: -- comptible: should be "samsung,exynos5440-clock". +- compatible: should be "samsung,exynos5440-clock". - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/crypto/omap-des.txt b/Documentation/devicetree/bindings/crypto/omap-des.txt new file mode 100644 index 000000000000..e8c63bf2e16d --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-des.txt @@ -0,0 +1,30 @@ +OMAP SoC DES crypto Module + +Required properties: + +- compatible : Should contain "ti,omap4-des" +- ti,hwmods: Name of the hwmod associated with the DES module +- reg : Offset and length of the register set for the module +- interrupts : the interrupt-specifier for the DES module +- clocks : A phandle to the functional clock node of the DES module + corresponding to each entry in clock-names +- clock-names : Name of the functional clock, should be "fck" + +Optional properties: +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt + Each entry corresponds to an entry in dma-names +- dma-names: DMA request names should include "tx" and "rx" if present + +Example: + /* DRA7xx SoC */ + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = ; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt index f839acd6f0ee..ad9115569611 100644 --- a/Documentation/devicetree/bindings/crypto/omap-sham.txt +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt @@ -6,7 +6,7 @@ Required properties: SHAM versions: - "ti,omap2-sham" for OMAP2 & OMAP3. - "ti,omap4-sham" for OMAP4 and AM33XX. - Note that these two versions are incompatible. + - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX. - ti,hwmods: Name of the hwmod associated with the SHAM module - reg : Offset and length of the register set for the module - interrupts : the interrupt-specifier for the SHAM module. diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index e1f343c7a34b..f69bcf5a6343 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -28,7 +28,7 @@ The three cells in order are: dependent: - bit 7-0: peripheral identifier for the hardware handshaking interface. The identifier can be different for tx and rx. - - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP. Example: diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt index b0019eb5330e..798cfc9d3839 100644 --- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt +++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt @@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on Every GPIO controller node must have #gpio-cells property defined, this information will be used to translate gpio-specifiers. +See bindings/gpio/gpio.txt for details of how to specify GPIO +information for devices. + +The GPIO module usually is connected to the SoC's internal interrupt +controller, see bindings/interrupt-controller/interrupts.txt (the +interrupt client nodes section) for details how to specify this GPIO +module's interrupt. + +The GPIO module may serve as another interrupt controller (cascaded to +the SoC's internal interrupt controller). See the interrupt controller +nodes section in bindings/interrupt-controller/interrupts.txt for +details. Required properties: -- compatible : "fsl,-gpio" followed by "fsl,mpc8349-gpio" for - 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - interrupts : Interrupt mapping for GPIO IRQ. - - interrupt-parent : Phandle for the interrupt controller that - services interrupts for this device. -- gpio-controller : Marks the port as GPIO controller. +- compatible: "fsl,-gpio" followed by "fsl,mpc8349-gpio" + for 83xx, "fsl,mpc8572-gpio" for 85xx, or + "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells: Should be two. The first cell is the pin number + and the second cell is used to specify optional + parameters (currently unused). +- interrupt-parent: Phandle for the interrupt controller that + services interrupts for this device. +- interrupts: Interrupt mapping for GPIO IRQ. +- gpio-controller: Marks the port as GPIO controller. + +Optional properties: +- interrupt-controller: Empty boolean property which marks the GPIO + module as an IRQ controller. +- #interrupt-cells: Should be two. Defines the number of integer + cells required to specify an interrupt within + this interrupt controller. The first cell + defines the pin number, the second cell + defines additional flags (trigger type, + trigger polarity). Note that the available + set of trigger conditions supported by the + GPIO module depends on the actual SoC. Example of gpio-controller nodes for a MPC8347 SoC: @@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC: #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xc00 0x100>; - interrupts = <74 0x8>; interrupt-parent = <&ipic>; + interrupts = <74 0x8>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio-controller@d00 { #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xd00 0x100>; - interrupts = <75 0x8>; interrupt-parent = <&ipic>; + interrupts = <75 0x8>; gpio-controller; }; -See booting-without-of.txt for details of how to specify GPIO -information for devices. - -To use GPIO pins as interrupt sources for peripherals, specify the -GPIO controller as the interrupt parent and define GPIO number + -trigger mode using the interrupts property, which is defined like -this: - -interrupts = , where: - - number: GPIO pin (0..31) - - trigger: trigger mode: - 2 = trigger on falling edge - 3 = trigger on both edges - -Example of device using this is: +Example of a peripheral using the GPIO module as an IRQ controller: funkyfpga@0 { compatible = "funky-fpga"; ... - interrupts = <4 3>; interrupt-parent = <&gpio1>; + interrupts = <4 3>; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt b/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt new file mode 100644 index 000000000000..1b87b741fa8e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt @@ -0,0 +1,35 @@ +Broadcom Kona Family I2C +========================= + +This I2C controller is used in the following Broadcom SoCs: + + BCM11130 + BCM11140 + BCM11351 + BCM28145 + BCM28155 + +Required Properties +------------------- +- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c" +- reg: Physical base address and length of controller registers +- interrupts: The interrupt number used by the controller +- clocks: clock specifier for the kona i2c external clock +- clock-frequency: The I2C bus frequency in Hz +- #address-cells: Should be <1> +- #size-cells: Should be <0> + +Refer to clocks/clock-bindings.txt for generic clock consumer +properties. + +Example: + +i2c@3e016000 { + compatible = "brcm,bcm11351-i2c","brcm,kona-i2c"; + reg = <0x3e016000 0x80>; + interrupts = ; + clocks = <&bsc1_clk>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt new file mode 100644 index 000000000000..056732cfdcee --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt @@ -0,0 +1,44 @@ +* Samsung's High Speed I2C controller + +The Samsung's High Speed I2C controller is used to interface with I2C devices +at various speeds ranging from 100khz to 3.4Mhz. + +Required properties: + - compatible: value should be. + -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - #address-cells: always 1 (for i2c addresses) + - #size-cells: always 0 + + - Pinctrl: + - pinctrl-0: Pin control group to be used for this controller. + - pinctrl-names: Should contain only one value - "default". + +Optional properties: + - clock-frequency: Desired operating frequency in Hz of the bus. + -> If not specified, the bus operates in fast-speed mode at + at 100khz. + -> If specified, the bus operates in high-speed mode only if the + clock-frequency is >= 1Mhz. + +Example: + +hsi2c@12ca0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12ca0000 0x100>; + interrupts = <56>; + clock-frequency = <100000>; + + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt index 56564aa4b444..7e49839d4124 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt @@ -1,7 +1,8 @@ I2C for OMAP platforms Required properties : -- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c" +- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c" + or "ti,omap4-i2c" - ti,hwmods : Must be "i2c", n being the instance number (1-based) - #address-cells = <1>; - #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt new file mode 100644 index 000000000000..897cfcd5ce92 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -0,0 +1,23 @@ +I2C for R-Car platforms + +Required properties: +- compatible: Must be one of + "renesas,i2c-rcar" + "renesas,i2c-r8a7778" + "renesas,i2c-r8a7779" + "renesas,i2c-r8a7790" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt specifier. + +Optional properties: +- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this + propoerty indicates the default frequency 100 kHz. + +Examples : + +i2c0: i2c@e6500000 { + compatible = "renesas,i2c-rcar-h2"; + reg = <0 0xe6500000 0 0x428>; + interrupts = <0 174 0x4>; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt new file mode 100644 index 000000000000..437e0db3823c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-st.txt @@ -0,0 +1,41 @@ +ST SSC binding, for I2C mode operation + +Required properties : +- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c" +- reg : Offset and length of the register set for the device +- interrupts : the interrupt specifier +- clock-names: Must contain "ssc". +- clocks: Must contain an entry for each name in clock-names. See the common + clock bindings. +- A pinctrl state named "default" must be defined to set pins in mode of + operation for I2C transfer. + +Optional properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. As only Normal and Fast modes + are supported, possible values are 100000 and 400000. +- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is + allowed through the deglitch circuit. In units of us. +- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is + allowed through the deglitch circuit. In units of us. +- A pinctrl state named "idle" could be defined to set pins in idle state + when I2C instance is not performing a transfer. +- A pinctrl state named "sleep" could be defined to set pins in sleep state + when driver enters in suspend. + + + +Example : + +i2c0: i2c@fed40000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed40000 0x110>; + interrupts = ; + clocks = <&CLK_S_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; +}; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index ad6a73852f08..b1cb3415e6f1 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -15,6 +15,7 @@ adi,adt7461 +/-1C TDM Extended Temp Range I.C adt7461 +/-1C TDM Extended Temp Range I.C at,24c08 i2c serial eeprom (24cxx) atmel,24c02 i2c serial eeprom (24cxx) +atmel,at97sc3204t i2c trusted platform module (TPM) catalyst,24c32 i2c serial eeprom dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock dallas,ds1338 I2C RTC with 56-Byte NV RAM @@ -35,6 +36,7 @@ fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec +gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator @@ -44,6 +46,7 @@ mc,rv3029c2 Real Time Clock Module with I2C-Bus national,lm75 I2C TEMP SENSOR national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor national,lm92 ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface +nuvoton,npct501 i2c trusted platform module (TPM) nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pcf8563 Real-time clock/calendar @@ -61,3 +64,4 @@ taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp275 Digital Temperature Sensor +winbond,wpct301 i2c trusted platform module (TPM) diff --git a/Documentation/devicetree/bindings/media/st-rc.txt b/Documentation/devicetree/bindings/media/st-rc.txt new file mode 100644 index 000000000000..05c432d08bca --- /dev/null +++ b/Documentation/devicetree/bindings/media/st-rc.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for ST IRB IP + +Required properties: + - compatible: Should contain "st,comms-irb". + - reg: Base physical address of the controller and length of memory + mapped region. + - interrupts: interrupt-specifier for the sole interrupt generated by + the device. The interrupt specifier format depends on the interrupt + controller parent. + - rx-mode: can be "infrared" or "uhf". This property specifies the L1 + protocol used for receiving remote control signals. rx-mode should + be present iff the rx pins are wired up. + - tx-mode: should be "infrared". This property specifies the L1 + protocol used for transmitting remote control signals. tx-mode should + be present iff the tx pins are wired up. + +Optional properties: + - pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing + properly for IRB pins. + - clocks : phandle with clock-specifier pair for IRB. + +Example node: + + rc: rc@fe518000 { + compatible = "st,comms-irb"; + reg = <0xfe518000 0x234>; + interrupts = <0 203 0>; + rx-mode = "infrared"; + }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 1dd622546d06..9046ba06c47a 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -12,6 +12,11 @@ Required properties: Optional properties: - fsl,cd-controller : Indicate to use controller internal card detection - fsl,wp-controller : Indicate to use controller internal write protection +- fsl,delay-line : Specify the number of delay cells for override mode. + This is used to set the clock delay for DLL(Delay Line) on override mode + to select a proper data sampling window in case the clock quality is not good + due to signal path is too long on the board. Please refer to eSDHC/uSDHC + chapter, DLL (Delay Line) section in RM for details. Examples: diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 066a78b034ca..8f3f13315358 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -52,6 +52,9 @@ Optional properties: is specified and the ciu clock is specified then we'll try to set the ciu clock to this at probe time. +* clock-freq-min-max: Minimum and Maximum clock frequency for card output + clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default. + * num-slots: specifies the number of slots supported by the controller. The number of physical slots actually used could be equal or less than the value specified by num-slots. If this property is not specified, the value @@ -66,6 +69,10 @@ Optional properties: * supports-highspeed: Enables support for high speed cards (up to 50MHz) +* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode + +* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode + * broken-cd: as documented in mmc core bindings. * vmmc-supply: The phandle to the regulator to use for vmmc. If this is @@ -93,8 +100,10 @@ board specific portions as listed below. dwmmc0@12200000 { clock-frequency = <400000000>; + clock-freq-min-max = <400000 200000000>; num-slots = <1>; supports-highspeed; + caps2-mmc-hs200-1_8v; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 000000000000..8de579969763 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index d53639221403..845ff848d895 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,7 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. +- phy-supply: regulator that powers the Ethernet PHY. Example: @@ -25,4 +26,5 @@ ethernet@83fec000 { phy-mode = "mii"; phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; + phy-supply = <®_fec_supply>; }; diff --git a/Documentation/devicetree/bindings/power/twl-charger.txt b/Documentation/devicetree/bindings/power/twl-charger.txt new file mode 100644 index 000000000000..d5c706216df5 --- /dev/null +++ b/Documentation/devicetree/bindings/power/twl-charger.txt @@ -0,0 +1,20 @@ +TWL BCI (Battery Charger Interface) + +Required properties: +- compatible: + - "ti,twl4030-bci" +- interrupts: two interrupt lines from the TWL SIH (secondary + interrupt handler) - interrupts 9 and 2. + +Optional properties: +- ti,bb-uvolt: microvolts for charging the backup battery. +- ti,bb-uamp: microamps for charging the backup battery. + +Examples: + +bci { + compatible = "ti,twl4030-bci"; + interrupts = <9>, <2>; + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt new file mode 100644 index 000000000000..4f6a550184d0 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt @@ -0,0 +1,32 @@ +TI BQ24735 Charge Controller +~~~~~~~~~~ + +Required properties : + - compatible : "ti,bq24735" + +Optional properties : + - interrupts : Specify the interrupt to be used to trigger when the AC + adapter is either plugged in or removed. + - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter + presence. This is a Host GPIO that is configured as an input and + connected to the bq24735. + - ti,charge-current : Used to control and set the charging current. This value + must be between 128mA and 8.128A with a 64mA step resolution. The POR value + is 0x0000h. This number is in mA (e.g. 8192), see spec for more information + about the ChargeCurrent (0x14h) register. + - ti,charge-voltage : Used to control and set the charging voltage. This value + must be between 1.024V and 19.2V with a 16mV step resolution. The POR value + is 0x0000h. This number is in mV (e.g. 19200), see spec for more information + about the ChargeVoltage (0x15h) register. + - ti,input-current : Used to control and set the charger input current. This + value must be between 128mA and 8.064A with a 128mA step resolution. The + POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for + more information about the InputCurrent (0x3fh) register. + +Example: + + bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + ti,ac-detect-gpios = <&gpio 72 0x1>; + } diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt index 2a4b4bce6110..7fc1b010fa75 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt @@ -1,33 +1,30 @@ -* Freescale 83xx DMA Controller +* Freescale DMA Controllers -Freescale PowerPC 83xx have on chip general purpose DMA controllers. +** Freescale Elo DMA Controller + This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx + series chips such as mpc8315, mpc8349, mpc8379 etc. Required properties: -- compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8349, mpc8360, etc.) and the second is - "fsl,elo-dma" -- reg : -- ranges : Should be defined as specified in 1) to describe the - DMA controller channels. +- compatible : must include "fsl,elo-dma" +- reg : DMA General Status Register, i.e. DGSR which contains + status for all the 4 DMA channels +- ranges : describes the mapping between the address space of the + DMA channels and the address space of the DMA controller - cell-index : controller index. 0 for controller @ 0x8100 -- interrupts : +- interrupts : interrupt specifier for DMA IRQ - interrupt-parent : optional, if needed for interrupt mapping - - DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8349, mpc8350, etc.) and the second is - "fsl,elo-dma-channel". However, see note below. - - reg : - - cell-index : dma channel index starts at 0. + - compatible : must include "fsl,elo-dma-channel" + However, see note below. + - reg : DMA channel specific registers + - cell-index : DMA channel index starts at 0. Optional properties: - - interrupts : - (on 83xx this is expected to be identical to - the interrupts property of the parent node) + - interrupts : interrupt specifier for DMA channel IRQ + (on 83xx this is expected to be identical to + the interrupts property of the parent node) - interrupt-parent : optional, if needed for interrupt mapping Example: @@ -70,30 +67,27 @@ Example: }; }; -* Freescale 85xx/86xx DMA Controller - -Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers. +** Freescale EloPlus DMA Controller + This is a 4-channel DMA controller with extended addresses and chaining, + mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as + mpc8540, mpc8641 p4080, bsc9131 etc. Required properties: -- compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8540, mpc8540, etc.) and the second is - "fsl,eloplus-dma" -- reg : +- compatible : must include "fsl,eloplus-dma" +- reg : DMA General Status Register, i.e. DGSR which contains + status for all the 4 DMA channels - cell-index : controller index. 0 for controller @ 0x21000, 1 for controller @ 0xc000 -- ranges : Should be defined as specified in 1) to describe the - DMA controller channels. +- ranges : describes the mapping between the address space of the + DMA channels and the address space of the DMA controller - DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8540, mpc8560, etc.) and the second is - "fsl,eloplus-dma-channel". However, see note below. - - cell-index : dma channel index starts at 0. - - reg : - - interrupts : + - compatible : must include "fsl,eloplus-dma-channel" + However, see note below. + - cell-index : DMA channel index starts at 0. + - reg : DMA channel specific registers + - interrupts : interrupt specifier for DMA channel IRQ - interrupt-parent : optional, if needed for interrupt mapping Example: @@ -134,6 +128,76 @@ Example: }; }; +** Freescale Elo3 DMA Controller + DMA controller which has same function as EloPlus except that Elo3 has 8 + channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx + series chips, such as t1040, t4240, b4860. + +Required properties: + +- compatible : must include "fsl,elo3-dma" +- reg : contains two entries for DMA General Status Registers, + i.e. DGSR0 which includes status for channel 1~4, and + DGSR1 for channel 5~8 +- ranges : describes the mapping between the address space of the + DMA channels and the address space of the DMA controller + +- DMA channel nodes: + - compatible : must include "fsl,eloplus-dma-channel" + - reg : DMA channel specific registers + - interrupts : interrupt specifier for DMA channel IRQ + - interrupt-parent : optional, if needed for interrupt mapping + +Example: +dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x100300 0x4>, + <0x100600 0x4>; + ranges = <0x0 0x100100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <31 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <76 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <77 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <78 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <79 2 0 0>; + }; +}; + Note on DMA channel compatible properties: The compatible property must say "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA driver (fsldma). Any DMA channel used by fsldma cannot be used by another diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt index d61fccd40bad..5538de9c2007 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt @@ -15,7 +15,7 @@ Required properties: samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210, Exynos4210 rev0 SoCs samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210, - Exynos4x12 and Exynos5250 SoCs + Exynos4x12, Exynos5250 and Exynos5420 SoCs - reg: base address and size of register area - interrupts: list of timer interrupts (one interrupt per timer, starting at timer 0) diff --git a/Documentation/devicetree/bindings/rng/qcom,prng.txt b/Documentation/devicetree/bindings/rng/qcom,prng.txt new file mode 100644 index 000000000000..8e5853c2879b --- /dev/null +++ b/Documentation/devicetree/bindings/rng/qcom,prng.txt @@ -0,0 +1,17 @@ +Qualcomm MSM pseudo random number generator. + +Required properties: + +- compatible : should be "qcom,prng" +- reg : specifies base physical address and size of the registers map +- clocks : phandle to clock-controller plus clock-specifier pair +- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block + +Example: + + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&clock GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt deleted file mode 100644 index 6b9e51896693..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt +++ /dev/null @@ -1,5 +0,0 @@ -NVIDIA Tegra 2 SPI device - -Required properties: -- compatible : should be "nvidia,tegra20-spi". -- gpios : should specify GPIOs used for chipselect. diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt index 4c85c4c69584..2ba5f9c023ac 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.txt +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt @@ -2,8 +2,8 @@ OMAP2+ McSPI device Required properties: - compatible : - - "ti,omap2-spi" for OMAP2 & OMAP3. - - "ti,omap4-spi" for OMAP4+. + - "ti,omap2-mcspi" for OMAP2 & OMAP3. + - "ti,omap4-mcspi" for OMAP4+. - ti,spi-num-cs : Number of chipselect supported by the instance. - ti,hwmods: Name of the hwmod associated to the McSPI - ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ce95ed1c6d3e..edbb8d88c85e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -32,12 +32,14 @@ est ESTeem Wireless Modems fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +gmt Global Mixed-mode Technology, Inc. hisilicon Hisilicon Limited. hp Hewlett Packard ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. img Imagination Technologies Ltd. intercontrol Inter Control Group +lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) marvell Marvell Technology Group Ltd. diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt index 1e4fc727f3b1..764db86d441a 100644 --- a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt +++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt @@ -10,12 +10,16 @@ Required properties: last value in the array represents a 100% duty cycle (brightest). - default-brightness-level: the default brightness level (index into the array defined by the "brightness-levels" property) + - power-supply: regulator for supply voltage Optional properties: - pwm-names: a list of names for the PWM devices specified in the "pwms" property (see PWM binding[0]) + - enable-gpios: contains a single GPIO specifier for the GPIO which enables + and disables the backlight (see GPIO binding[1]) [0]: Documentation/devicetree/bindings/pwm/pwm.txt +[1]: Documentation/devicetree/bindings/gpio/gpio.txt Example: @@ -25,4 +29,7 @@ Example: brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + + power-supply = <&vdd_bl_reg>; + enable-gpios = <&gpio 58 0>; }; diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt new file mode 100644 index 000000000000..08e16f684f2d --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt @@ -0,0 +1,21 @@ +Synopsys Designware Watchdog Timer + +Required Properties: + +- compatible : Should contain "snps,dw-wdt" +- reg : Base address and size of the watchdog timer registers. +- clocks : phandle + clock-specifier for the clock that drives the + watchdog timer. + +Optional Properties: + +- interrupts : The interrupt used for the watchdog timeout warning. + +Example: + + watchdog0: wd@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&per_base_clk>; + }; diff --git a/Documentation/devicetree/bindings/gpio/men-a021-wdt.txt b/Documentation/devicetree/bindings/watchdog/men-a021-wdt.txt similarity index 100% rename from Documentation/devicetree/bindings/gpio/men-a021-wdt.txt rename to Documentation/devicetree/bindings/watchdog/men-a021-wdt.txt diff --git a/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt new file mode 100644 index 000000000000..1169857d1d12 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt @@ -0,0 +1,15 @@ +MOXA ART Watchdog timer + +Required properties: + +- compatible : Must be "moxa,moxart-watchdog" +- reg : Should contain registers location and length +- clocks : Should contain phandle for the clock that drives the counter + +Example: + + watchdog: watchdog@98500000 { + compatible = "moxa,moxart-watchdog"; + reg = <0x98500000 0x10>; + clocks = <&coreclk>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt new file mode 100644 index 000000000000..d7bab3db9d1f --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt @@ -0,0 +1,19 @@ +Ralink Watchdog Timers + +Required properties: +- compatible: must be "ralink,rt2880-wdt" +- reg: physical base address of the controller and length of the register range + +Optional properties: +- interrupt-parent: phandle to the INTC device node +- interrupts: Specify the INTC interrupt number + +Example: + + watchdog@120 { + compatible = "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt new file mode 100644 index 000000000000..9cbc76c89b2b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt @@ -0,0 +1,14 @@ +SiRFSoC Timer and Watchdog Timer(WDT) Controller + +Required properties: +- compatible: "sirf,prima2-tick" +- reg: Address range of tick timer/WDT register set +- interrupts: interrupt number to the cpu + +Example: + +timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; +}; diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt index a2b5663eae26..dd77a81bdb80 100644 --- a/Documentation/dmatest.txt +++ b/Documentation/dmatest.txt @@ -15,39 +15,48 @@ be built as module or inside kernel. Let's consider those cases. Part 2 - When dmatest is built as a module... -After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest -folder with nodes will be created. There are two important files located. First -is the 'run' node that controls run and stop phases of the test, and the second -one, 'results', is used to get the test case results. - -Note that in this case test will not run on load automatically. - Example of usage: + % modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1 + +...or: + % modprobe dmatest % echo dma0chan0 > /sys/module/dmatest/parameters/channel % echo 2000 > /sys/module/dmatest/parameters/timeout % echo 1 > /sys/module/dmatest/parameters/iterations - % echo 1 > /sys/kernel/debug/dmatest/run + % echo 1 > /sys/module/dmatest/parameters/run + +...or on the kernel command line: + + dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1 Hint: available channel list could be extracted by running the following command: % ls -1 /sys/class/dma/ -After a while you will start to get messages about current status or error like -in the original code. +Once started a message like "dmatest: Started 1 threads using dma0chan0" is +emitted. After that only test failure messages are reported until the test +stops. Note that running a new test will not stop any in progress test. -The following command should return actual state of the test. - % cat /sys/kernel/debug/dmatest/run +The following command returns the state of the test. + % cat /sys/module/dmatest/parameters/run -To wait for test done the user may perform a busy loop that checks the state. +To wait for test completion userpace can poll 'run' until it is false, or use +the wait parameter. Specifying 'wait=1' when loading the module causes module +initialization to pause until a test run has completed, while reading +/sys/module/dmatest/parameters/wait waits for any running test to complete +before returning. For example, the following scripts wait for 42 tests +to complete before exiting. Note that if 'iterations' is set to 'infinite' then +waiting is disabled. - % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] - > do - > echo -n "." - > sleep 1 - > done - > echo +Example: + % modprobe dmatest run=1 iterations=42 wait=1 + % modprobe -r dmatest +...or: + % modprobe dmatest run=1 iterations=42 + % cat /sys/module/dmatest/parameters/wait + % modprobe -r dmatest Part 3 - When built-in in the kernel... @@ -62,21 +71,22 @@ case. You always could check them at run-time by running Part 4 - Gathering the test results -The module provides a storage for the test results in the memory. The gathered -data could be used after test is done. +Test results are printed to the kernel log buffer with the format: -The special file 'results' in the debugfs represents gathered data of the in -progress test. The messages collected are printed to the kernel log as well. +"dmatest: result : : '' with src_off= dst_off= len= ()" Example of output: - % cat /sys/kernel/debug/dmatest/results - dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) + % dmesg | tail -n 1 + dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, -or status. +or status. A test thread also emits a summary line at completion listing the +number of tests executed, number that failed, and a result code. -Comparison between buffers is stored to the dedicated structure. +Example: + % dmesg | tail -n 1 + dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0) -Note that the verify result is now accessible only via file 'results' in the -debugfs. +The details of a data miscompare error are also emitted, but do not follow the +above format. diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt index 9dae59407437..5dd282dda55c 100644 --- a/Documentation/filesystems/btrfs.txt +++ b/Documentation/filesystems/btrfs.txt @@ -70,6 +70,12 @@ Unless otherwise specified, all options default to off. See comments at the top of fs/btrfs/check-integrity.c for more info. + commit= + Set the interval of periodic commit, 30 seconds by default. Higher + values defer data being synced to permanent storage with obvious + consequences when the system crashes. The upper bound is not forced, + but a warning is printed if it's more than 300 seconds (5 minutes). + compress compress= compress-force @@ -154,7 +160,11 @@ Unless otherwise specified, all options default to off. Currently this scans a list of several previous tree roots and tries to use the first readable. - skip_balance + rescan_uuid_tree + Force check and rebuild procedure of the UUID tree. This should not + normally be needed. + + skip_balance Skip automatic resume of interrupted balance operation after mount. May be resumed with "btrfs balance resume." @@ -234,24 +244,14 @@ available from the git repository at the following location: These include the following tools: -mkfs.btrfs: create a filesystem +* mkfs.btrfs: create a filesystem -btrfsctl: control program to create snapshots and subvolumes: +* btrfs: a single tool to manage the filesystems, refer to the manpage for more details - mount /dev/sda2 /mnt - btrfsctl -s new_subvol_name /mnt - btrfsctl -s snapshot_of_default /mnt/default - btrfsctl -s snapshot_of_new_subvol /mnt/new_subvol_name - btrfsctl -s snapshot_of_a_snapshot /mnt/snapshot_of_new_subvol - ls /mnt - default snapshot_of_a_snapshot snapshot_of_new_subvol - new_subvol_name snapshot_of_default +* 'btrfsck' or 'btrfs check': do a consistency check of the filesystem - Snapshots and subvolumes cannot be deleted right now, but you can - rm -rf all the files and directories inside them. +Other tools for specific tasks: -btrfsck: do a limited check of the FS extent trees. +* btrfs-convert: in-place conversion from ext2/3/4 filesystems -btrfs-debug-tree: print all of the FS metadata in text form. Example: - - btrfs-debug-tree /dev/sda2 >& big_output_file +* btrfs-image: dump filesystem metadata for debugging diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX new file mode 100644 index 000000000000..1de43ae46ae6 --- /dev/null +++ b/Documentation/gpio/00-INDEX @@ -0,0 +1,14 @@ +00-INDEX + - This file +gpio.txt + - Introduction to GPIOs and their kernel interfaces +consumer.txt + - How to obtain and use GPIOs in a driver +driver.txt + - How to write a GPIO driver +board.txt + - How to assign GPIOs to a consumer device and a function +sysfs.txt + - Information about the GPIO sysfs interface +gpio-legacy.txt + - Historical documentation of the deprecated GPIO integer interface diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt new file mode 100644 index 000000000000..0d03506f2cc5 --- /dev/null +++ b/Documentation/gpio/board.txt @@ -0,0 +1,115 @@ +GPIO Mappings +============= + +This document explains how GPIOs can be assigned to given devices and functions. +Note that it only applies to the new descriptor-based interface. For a +description of the deprecated integer-based GPIO interface please refer to +gpio-legacy.txt (actually, there is no real mapping possible with the old +interface; you just fetch an integer from somewhere and request the +corresponding GPIO. + +Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage +is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in +their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to +describe its hardware layout. Currently, mappings can be defined through device +tree, ACPI, and platform data. + +Device Tree +----------- +GPIOs can easily be mapped to devices and functions in the device tree. The +exact way to do it depends on the GPIO controller providing the GPIOs, see the +device tree bindings for your controller. + +GPIOs mappings are defined in the consumer device's node, in a property named +-gpios, where is the function the driver will request +through gpiod_get(). For example: + + foo_device { + compatible = "acme,foo"; + ... + led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */ + <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */ + <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */ + + power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + +This property will make GPIOs 15, 16 and 17 available to the driver under the +"led" function, and GPIO 1 as the "power" GPIO: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + +The led GPIOs will be active-high, while the power GPIO will be active-low (i.e. +gpiod_is_active_low(power) will be true). + +ACPI +---- +ACPI does not support function names for GPIOs. Therefore, only the "idx" +argument of gpiod_get_index() is useful to discriminate between GPIOs assigned +to a device. The "con_id" argument can still be set for debugging purposes (it +will appear under error messages as well as debug and sysfs nodes). + +Platform Data +------------- +Finally, GPIOs can be bound to devices and functions using platform data. Board +files that desire to do so need to include the following header: + + #include + +GPIOs are mapped by the means of tables of lookups, containing instances of the +gpiod_lookup structure. Two macros are defined to help declaring such mappings: + + GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags) + GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags) + +where + + - chip_label is the label of the gpiod_chip instance providing the GPIO + - chip_hwnum is the hardware number of the GPIO within the chip + - dev_id is the identifier of the device that will make use of this GPIO. If + NULL, the GPIO will be available to all devices. + - con_id is the name of the GPIO function from the device point of view. It + can be NULL. + - idx is the index of the GPIO within the function. + - flags is defined to specify the following properties: + * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low + * GPIOF_OPEN_DRAIN - GPIO pin is open drain type. + * GPIOF_OPEN_SOURCE - GPIO pin is open source type. + +In the future, these flags might be extended to support more properties. + +Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0. + +A lookup table can then be defined as follows: + + struct gpiod_lookup gpios_table[] = { + GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW), + }; + +And the table can be added by the board code as follows: + + gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table)); + +The driver controlling "foo.0" will then be able to obtain its GPIOs as follows: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + gpiod_direction_output(power, 1); + +Since the "power" GPIO is mapped as active-low, its actual signal will be 0 +after this code. Contrary to the legacy integer GPIO interface, the active-low +property is handled during mapping and is thus transparent to GPIO consumers. diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt new file mode 100644 index 000000000000..07c74a3765a0 --- /dev/null +++ b/Documentation/gpio/consumer.txt @@ -0,0 +1,197 @@ +GPIO Descriptor Consumer Interface +================================== + +This document describes the consumer interface of the GPIO framework. Note that +it describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + + +Guidelines for GPIOs consumers +============================== + +Drivers that can't work without standard GPIO calls should have Kconfig entries +that depend on GPIOLIB. The functions that allow a driver to obtain and use +GPIOs are available by including the following file: + + #include + +All the functions that work with the descriptor-based GPIO interface are +prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No +other function in the kernel should use these prefixes. + + +Obtaining and Disposing GPIOs +============================= + +With the descriptor-based interface, GPIOs are identified with an opaque, +non-forgeable handler that must be obtained through a call to one of the +gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the +device that will use the GPIO and the function the requested GPIO is supposed to +fulfill: + + struct gpio_desc *gpiod_get(struct device *dev, const char *con_id) + +If a function is implemented by using several GPIOs together (e.g. a simple LED +device that displays digits), an additional index argument can be specified: + + struct gpio_desc *gpiod_get_index(struct device *dev, + const char *con_id, unsigned int idx) + +Both functions return either a valid GPIO descriptor, or an error code checkable +with IS_ERR(). They will never return a NULL pointer. + +Device-managed variants of these functions are also defined: + + struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id) + + struct gpio_desc *devm_gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx) + +A GPIO descriptor can be disposed of using the gpiod_put() function: + + void gpiod_put(struct gpio_desc *desc) + +It is strictly forbidden to use a descriptor after calling this function. The +device-managed variant is, unsurprisingly: + + void devm_gpiod_put(struct device *dev, struct gpio_desc *desc) + + +Using GPIOs +=========== + +Setting Direction +----------------- +The first thing a driver must do with a GPIO is setting its direction. This is +done by invoking one of the gpiod_direction_*() functions: + + int gpiod_direction_input(struct gpio_desc *desc) + int gpiod_direction_output(struct gpio_desc *desc, int value) + +The return value is zero for success, else a negative errno. It should be +checked, since the get/set calls don't return errors and since misconfiguration +is possible. You should normally issue these calls from a task context. However, +for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part +of early board setup. + +For output GPIOs, the value provided becomes the initial output value. This +helps avoid signal glitching during system startup. + +A driver can also query the current direction of a GPIO: + + int gpiod_get_direction(const struct gpio_desc *desc) + +This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT. + +Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO +without setting its direction first is illegal and will result in undefined +behavior!** + + +Spinlock-Safe GPIO Access +------------------------- +Most GPIO controllers can be accessed with memory read/write instructions. Those +don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ +handlers and similar contexts. + +Use the following calls to access GPIOs from an atomic context: + + int gpiod_get_value(const struct gpio_desc *desc); + void gpiod_set_value(struct gpio_desc *desc, int value); + +The values are boolean, zero for low, nonzero for high. When reading the value +of an output pin, the value returned should be what's seen on the pin. That +won't always match the specified output value, because of issues including +open-drain signaling and output latencies. + +The get/set calls do not return errors because "invalid GPIO" should have been +reported earlier from gpiod_direction_*(). However, note that not all platforms +can read the value of output pins; those that can't should always return zero. +Also, using these calls for GPIOs that can't safely be accessed without sleeping +(see below) is an error. + + +GPIO Access That May Sleep +-------------------------- +Some GPIO controllers must be accessed using message based buses like I2C or +SPI. Commands to read or write those GPIO values require waiting to get to the +head of a queue to transmit a command and get its response. This requires +sleeping, which can't be done from inside IRQ handlers. + +Platforms that support this type of GPIO distinguish them from other GPIOs by +returning nonzero from this call: + + int gpiod_cansleep(const struct gpio_desc *desc) + +To access such GPIOs, a different set of accessors is defined: + + int gpiod_get_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) + +Accessing such GPIOs requires a context which may sleep, for example a threaded +IRQ handler, and those accessors must be used instead of spinlock-safe +accessors without the cansleep() name suffix. + +Other than the fact that these accessors might sleep, and will work on GPIOs +that can't be accessed from hardIRQ handlers, these calls act the same as the +spinlock-safe calls. + + +Active-low State and Raw GPIO Values +------------------------------------ +Device drivers like to manage the logical state of a GPIO, i.e. the value their +device will actually receive, no matter what lies between it and the GPIO line. +In some cases, it might make sense to control the actual GPIO line value. The +following set of calls ignore the active-low property of a GPIO and work on the +raw line value: + + int gpiod_get_raw_value(const struct gpio_desc *desc) + void gpiod_set_raw_value(struct gpio_desc *desc, int value) + int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value) + +The active-low state of a GPIO can also be queried using the following call: + + int gpiod_is_active_low(const struct gpio_desc *desc) + +Note that these functions should only be used with great moderation ; a driver +should not have to care about the physical line level. + +GPIOs mapped to IRQs +-------------------- +GPIO lines can quite often be used as IRQs. You can get the IRQ number +corresponding to a given GPIO using the following call: + + int gpiod_to_irq(const struct gpio_desc *desc) + +It will return an IRQ number, or an negative errno code if the mapping can't be +done (most likely because that particular GPIO cannot be used as IRQ). It is an +unchecked error to use a GPIO that wasn't set up as an input using +gpiod_direction_input(), or to use an IRQ number that didn't originally come +from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep. + +Non-error values returned from gpiod_to_irq() can be passed to request_irq() or +free_irq(). They will often be stored into IRQ resources for platform devices, +by the board-specific initialization code. Note that IRQ trigger options are +part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup +capabilities. + + +Interacting With the Legacy GPIO Subsystem +========================================== +Many kernel subsystems still handle GPIOs using the legacy integer-based +interface. Although it is strongly encouraged to upgrade them to the safer +descriptor-based API, the following two functions allow you to convert a GPIO +descriptor into the GPIO integer namespace and vice-versa: + + int desc_to_gpio(const struct gpio_desc *desc) + struct gpio_desc *gpio_to_desc(unsigned gpio) + +The GPIO number returned by desc_to_gpio() can be safely used as long as the +GPIO descriptor has not been freed. All the same, a GPIO number passed to +gpio_to_desc() must have been properly acquired, and usage of the returned GPIO +descriptor is only possible after the GPIO number has been released. + +Freeing a GPIO obtained by one API with the other API is forbidden and an +unchecked error. diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt new file mode 100644 index 000000000000..9da0bfa74781 --- /dev/null +++ b/Documentation/gpio/driver.txt @@ -0,0 +1,75 @@ +GPIO Descriptor Driver Interface +================================ + +This document serves as a guide for GPIO chip drivers writers. Note that it +describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + +Each GPIO controller driver needs to include the following header, which defines +the structures used to define a GPIO driver: + + #include + + +Internal Representation of GPIOs +================================ + +Inside a GPIO driver, individual GPIOs are identified by their hardware number, +which is a unique number between 0 and n, n being the number of GPIOs managed by +the chip. This number is purely internal: the hardware number of a particular +GPIO descriptor is never made visible outside of the driver. + +On top of this internal number, each GPIO also need to have a global number in +the integer GPIO namespace so that it can be used with the legacy GPIO +interface. Each chip must thus have a "base" number (which can be automatically +assigned), and for each GPIO the global number will be (base + hardware number). +Although the integer representation is considered deprecated, it still has many +users and thus needs to be maintained. + +So for example one platform could use numbers 32-159 for GPIOs, with a +controller defining 128 GPIOs at a "base" of 32 ; while another platform uses +numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO +controller, and on one particular board 80-95 with an FPGA. The numbers need not +be contiguous; either of those platforms could also use numbers 2000-2063 to +identify GPIOs in a bank of I2C GPIO expanders. + + +Controller Drivers: gpio_chip +============================= + +In the gpiolib framework each GPIO controller is packaged as a "struct +gpio_chip" (see linux/gpio/driver.h for its complete definition) with members +common to each controller of that type: + + - methods to establish GPIO direction + - methods used to access GPIO values + - method to return the IRQ number associated to a given GPIO + - flag saying whether calls to its methods may sleep + - optional debugfs dump method (showing extra state like pullup config) + - optional base number (will be automatically assigned if omitted) + - label for diagnostics and GPIOs mapping using platform data + +The code implementing a gpio_chip should support multiple instances of the +controller, possibly using the driver model. That code will configure each +gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare; +use gpiochip_remove() when it is unavoidable. + +Most often a gpio_chip is part of an instance-specific structure with state not +exposed by the GPIO interfaces, such as addressing, power management, and more. +Chips such as codecs will have complex non-GPIO state. + +Any debugfs dump method should normally ignore signals which haven't been +requested as GPIOs. They can use gpiochip_is_requested(), which returns either +NULL or the label associated with that GPIO when it was requested. + +Locking IRQ usage +----------------- +Input GPIOs can be used as IRQ signals. When this happens, a driver is requested +to mark the GPIO as being used as an IRQ: + + int gpiod_lock_as_irq(struct gpio_desc *desc) + +This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock +is released: + + void gpiod_unlock_as_irq(struct gpio_desc *desc) diff --git a/Documentation/gpio.txt b/Documentation/gpio/gpio-legacy.txt similarity index 100% rename from Documentation/gpio.txt rename to Documentation/gpio/gpio-legacy.txt diff --git a/Documentation/gpio/gpio.txt b/Documentation/gpio/gpio.txt new file mode 100644 index 000000000000..cd9b356e88cd --- /dev/null +++ b/Documentation/gpio/gpio.txt @@ -0,0 +1,119 @@ +GPIO Interfaces +=============== + +The documents in this directory give detailed instructions on how to access +GPIOs in drivers, and how to write a driver for a device that provides GPIOs +itself. + +Due to the history of GPIO interfaces in the kernel, there are two different +ways to obtain and use GPIOs: + + - The descriptor-based interface is the preferred way to manipulate GPIOs, +and is described by all the files in this directory excepted gpio-legacy.txt. + - The legacy integer-based interface which is considered deprecated (but still +usable for compatibility reasons) is documented in gpio-legacy.txt. + +The remainder of this document applies to the new descriptor-based interface. +gpio-legacy.txt contains the same information applied to the legacy +integer-based interface. + + +What is a GPIO? +=============== + +A "General Purpose Input/Output" (GPIO) is a flexible software-controlled +digital signal. They are provided from many kinds of chip, and are familiar +to Linux developers working with embedded and custom hardware. Each GPIO +represents a bit connected to a particular pin, or "ball" on Ball Grid Array +(BGA) packages. Board schematics show which external hardware connects to +which GPIOs. Drivers can be written generically, so that board setup code +passes such pin configuration data to drivers. + +System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every +non-dedicated pin can be configured as a GPIO; and most chips have at least +several dozen of them. Programmable logic devices (like FPGAs) can easily +provide GPIOs; multifunction chips like power managers, and audio codecs +often have a few such pins to help with pin scarcity on SOCs; and there are +also "GPIO Expander" chips that connect using the I2C or SPI serial buses. +Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS +firmware knowing how they're used). + +The exact capabilities of GPIOs vary between systems. Common options: + + - Output values are writable (high=1, low=0). Some chips also have + options about how that value is driven, so that for example only one + value might be driven, supporting "wire-OR" and similar schemes for the + other value (notably, "open drain" signaling). + + - Input values are likewise readable (1, 0). Some chips support readback + of pins configured as "output", which is very useful in such "wire-OR" + cases (to support bidirectional signaling). GPIO controllers may have + input de-glitch/debounce logic, sometimes with software controls. + + - Inputs can often be used as IRQ signals, often edge triggered but + sometimes level triggered. Such IRQs may be configurable as system + wakeup events, to wake the system from a low power state. + + - Usually a GPIO will be configurable as either input or output, as needed + by different product boards; single direction ones exist too. + + - Most GPIOs can be accessed while holding spinlocks, but those accessed + through a serial bus normally can't. Some systems support both types. + +On a given board each GPIO is used for one specific purpose like monitoring +MMC/SD card insertion/removal, detecting card write-protect status, driving +a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware +watchdog, sensing a switch, and so on. + + +Common GPIO Properties +====================== + +These properties are met through all the other documents of the GPIO interface +and it is useful to understand them, especially if you need to define GPIO +mappings. + +Active-High and Active-Low +-------------------------- +It is natural to assume that a GPIO is "active" when its output signal is 1 +("high"), and inactive when it is 0 ("low"). However in practice the signal of a +GPIO may be inverted before is reaches its destination, or a device could decide +to have different conventions about what "active" means. Such decisions should +be transparent to device drivers, therefore it is possible to define a GPIO as +being either active-high ("1" means "active", the default) or active-low ("0" +means "active") so that drivers only need to worry about the logical signal and +not about what happens at the line level. + +Open Drain and Open Source +-------------------------- +Sometimes shared signals need to use "open drain" (where only the low signal +level is actually driven), or "open source" (where only the high signal level is +driven) signaling. That term applies to CMOS transistors; "open collector" is +used for TTL. A pullup or pulldown resistor causes the high or low signal level. +This is sometimes called a "wire-AND"; or more practically, from the negative +logic (low=true) perspective this is a "wire-OR". + +One common example of an open drain signal is a shared active-low IRQ line. +Also, bidirectional data bus signals sometimes use open drain signals. + +Some GPIO controllers directly support open drain and open source outputs; many +don't. When you need open drain signaling but your hardware doesn't directly +support it, there's a common idiom you can use to emulate it with any GPIO pin +that can be used as either an input or an output: + + LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides + the pullup. + + HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup + (or some other device) controls the signal. + +The same logic can be applied to emulate open source signaling, by driving the +high signal and configuring the GPIO as input for low. This open drain/open +source emulation can be handled transparently by the GPIO framework. + +If you are "driving" the signal high but gpiod_get_value(gpio) reports a low +value (after the appropriate rise time passes), you know some other component is +driving the shared signal low. That's not necessarily an error. As one common +example, that's how I2C clocks are stretched: a slave that needs a slower clock +delays the rising edge of SCK, and the I2C master adjusts its signaling rate +accordingly. diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt new file mode 100644 index 000000000000..c2c3a97f8ff7 --- /dev/null +++ b/Documentation/gpio/sysfs.txt @@ -0,0 +1,155 @@ +GPIO Sysfs Interface for Userspace +================================== + +Platforms which use the "gpiolib" implementors framework may choose to +configure a sysfs user interface to GPIOs. This is different from the +debugfs interface, since it provides control over GPIO direction and +value instead of just showing a gpio state summary. Plus, it could be +present on production systems without debugging support. + +Given appropriate hardware documentation for the system, userspace could +know for example that GPIO #23 controls the write protect line used to +protect boot loader segments in flash memory. System upgrade procedures +may need to temporarily remove that protection, first importing a GPIO, +then changing its output state, then updating the code before re-enabling +the write protection. In normal use, GPIO #23 would never be touched, +and the kernel would have no need to know about it. + +Again depending on appropriate hardware documentation, on some systems +userspace GPIO can be used to determine system configuration data that +standard kernels won't know about. And for some tasks, simple userspace +GPIO drivers could be all that the system really needs. + +Note that standard kernel drivers exist for common "LEDs and Buttons" +GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those +instead of talking directly to the GPIOs; they integrate with kernel +frameworks better than your userspace code could. + + +Paths in Sysfs +-------------- +There are three kinds of entry in /sys/class/gpio: + + - Control interfaces used to get userspace control over GPIOs; + + - GPIOs themselves; and + + - GPIO controllers ("gpio_chip" instances). + +That's in addition to standard files including the "device" symlink. + +The control interfaces are write-only: + + /sys/class/gpio/ + + "export" ... Userspace may ask the kernel to export control of + a GPIO to userspace by writing its number to this file. + + Example: "echo 19 > export" will create a "gpio19" node + for GPIO #19, if that's not requested by kernel code. + + "unexport" ... Reverses the effect of exporting to userspace. + + Example: "echo 19 > unexport" will remove a "gpio19" + node exported using the "export" file. + +GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) +and have the following read/write attributes: + + /sys/class/gpio/gpioN/ + + "direction" ... reads as either "in" or "out". This value may + normally be written. Writing as "out" defaults to + initializing the value as low. To ensure glitch free + operation, values "low" and "high" may be written to + configure the GPIO as an output with that initial value. + + Note that this attribute *will not exist* if the kernel + doesn't support changing the direction of a GPIO, or + it was exported by kernel code that didn't explicitly + allow userspace to reconfigure this GPIO's direction. + + "value" ... reads as either 0 (low) or 1 (high). If the GPIO + is configured as an output, this value may be written; + any nonzero value is treated as high. + + If the pin can be configured as interrupt-generating interrupt + and if it has been configured to generate interrupts (see the + description of "edge"), you can poll(2) on that file and + poll(2) will return whenever the interrupt was triggered. If + you use poll(2), set the events POLLPRI and POLLERR. If you + use select(2), set the file descriptor in exceptfds. After + poll(2) returns, either lseek(2) to the beginning of the sysfs + file and read the new value or close the file and re-open it + to read the value. + + "edge" ... reads as either "none", "rising", "falling", or + "both". Write these strings to select the signal edge(s) + that will make poll(2) on the "value" file return. + + This file exists only if the pin can be configured as an + interrupt generating input pin. + + "active_low" ... reads as either 0 (false) or 1 (true). Write + any nonzero value to invert the value attribute both + for reading and writing. Existing and subsequent + poll(2) support configuration via the edge attribute + for "rising" and "falling" edges will follow this + setting. + +GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the +controller implementing GPIOs starting at #42) and have the following +read-only attributes: + + /sys/class/gpio/gpiochipN/ + + "base" ... same as N, the first GPIO managed by this chip + + "label" ... provided for diagnostics (not always unique) + + "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) + +Board documentation should in most cases cover what GPIOs are used for +what purposes. However, those numbers are not always stable; GPIOs on +a daughtercard might be different depending on the base board being used, +or other cards in the stack. In such cases, you may need to use the +gpiochip nodes (possibly in conjunction with schematics) to determine +the correct GPIO number to use for a given signal. + + +Exporting from Kernel code +-------------------------- +Kernel code can explicitly manage exports of GPIOs which have already been +requested using gpio_request(): + + /* export the GPIO to userspace */ + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + + /* reverse gpio_export() */ + void gpiod_unexport(struct gpio_desc *desc); + + /* create a sysfs link to an exported GPIO node */ + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); + + /* change the polarity of a GPIO node in sysfs */ + int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value); + +After a kernel driver requests a GPIO, it may only be made available in +the sysfs interface by gpiod_export(). The driver can control whether the +signal direction may change. This helps drivers prevent userspace code +from accidentally clobbering important system state. + +This explicit exporting can help with debugging (by making some kinds +of experiments easier), or can provide an always-there interface that's +suitable for documenting as part of a board support package. + +After the GPIO has been exported, gpiod_export_link() allows creating +symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can +use this to provide the interface under their own device in sysfs with +a descriptive name. + +Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity +differences between boards from user space. Polarity change can be done both +before and after gpiod_export(), and previously enabled poll(2) support for +either rising or falling edge will be reconfigured to follow this setting. diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index d29dea0f3232..7b0dcdb57173 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -25,6 +25,7 @@ Supported adapters: * Intel Avoton (SOC) * Intel Wellsburg (PCH) * Intel Coleto Creek (PCH) + * Intel Wildcat Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9ca3e74a10e1..50680a59a2ff 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1190,15 +1190,24 @@ bytes respectively. Such letter suffixes can also be entirely omitted. owned by uid=0. ima_hash= [IMA] - Format: { "sha1" | "md5" } + Format: { md5 | sha1 | rmd160 | sha256 | sha384 + | sha512 | ... } default: "sha1" + The list of supported hash algorithms is defined + in crypto/hash_info.h. + ima_tcb [IMA] Load a policy which meets the needs of the Trusted Computing Base. This means IMA will measure all programs exec'd, files mmap'd for exec, and all files opened for read by uid=0. + ima_template= [IMA] + Select one of defined IMA measurements template formats. + Formats: { "ima" | "ima-ng" } + Default: "ima-ng" + init= [KNL] Format: Run specified binary instead of /sbin/init as init diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 0c980ad40b17..4d17487d5ad9 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type) int i; void *dp = get_dp(mic, type); - for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE; + for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE; i += mic_total_desc_size(d)) { d = dp + i; @@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr0->va, vr0->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr0->info->magic, MIC_MAGIC + type); - assert(vr0->info->magic == MIC_MAGIC + type); + le32toh(vr0->info->magic), MIC_MAGIC + type); + assert(le32toh(vr0->info->magic) == MIC_MAGIC + type); if (vr1) { vr1->va = (struct mic_vring *) &va[MIC_DEVICE_PAGE_END + vr_size]; @@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr1->va, vr1->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr1->info->magic, MIC_MAGIC + type + 1); - assert(vr1->info->magic == MIC_MAGIC + type + 1); + le32toh(vr1->info->magic), MIC_MAGIC + type + 1); + assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1); } done: return va; @@ -520,7 +520,7 @@ static void * virtio_net(void *arg) { static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)]; - static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64); + static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64))); struct iovec vnet_iov[2][2] = { { { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) }, { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } }, @@ -1412,6 +1412,12 @@ mic_config(void *arg) } do { + ret = lseek(fd, 0, SEEK_SET); + if (ret < 0) { + mpsslog("%s: Failed to seek to file start '%s': %s\n", + mic->name, pathname, strerror(errno)); + goto close_error1; + } ret = read(fd, value, sizeof(value)); if (ret < 0) { mpsslog("%s: Failed to read sysfs entry '%s': %s\n", diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 8b8a05787641..3c12d9a7ed00 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -577,9 +577,6 @@ tcp_limit_output_bytes - INTEGER typical pfifo_fast qdiscs. tcp_limit_output_bytes limits the number of bytes on qdisc or device to reduce artificial RTT/cwnd and reduce bufferbloat. - Note: For GSO/TSO enabled flows, we try to have at least two - packets in flight. Reducing tcp_limit_output_bytes might also - reduce the size of individual GSO packet (64KB being the max) Default: 131072 tcp_challenge_ack_limit - INTEGER diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 3f10b39b0346..89a8816990ff 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -135,11 +135,11 @@ CAPACITY_LEVEL - capacity level. This corresponds to POWER_SUPPLY_CAPACITY_LEVEL_*. TEMP - temperature of the power supply. -TEMP_ALERT_MIN - minimum battery temperature alert value in milli centigrade. -TEMP_ALERT_MAX - maximum battery temperature alert value in milli centigrade. +TEMP_ALERT_MIN - minimum battery temperature alert. +TEMP_ALERT_MAX - maximum battery temperature alert. TEMP_AMBIENT - ambient temperature. -TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert value in milli centigrade. -TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert value in milli centigrade. +TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert. +TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert. TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e. while battery powers a load) diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 0f54333b0ff2..b6ce00b2be9a 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -547,13 +547,11 @@ helper functions described in Section 4. In that case, pm_runtime_resume() should be used. Of course, for this purpose the device's runtime PM has to be enabled earlier by calling pm_runtime_enable(). -If the device bus type's or driver's ->probe() callback runs -pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts, -they will fail returning -EAGAIN, because the device's usage counter is -incremented by the driver core before executing ->probe(). Still, it may be -desirable to suspend the device as soon as ->probe() has finished, so the driver -core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for -the device at that time. +It may be desirable to suspend the device once ->probe() has finished. +Therefore the driver core uses the asyncronous pm_request_idle() to submit a +request to execute the subsystem-level idle callback for the device at that +time. A driver that makes use of the runtime autosuspend feature, may want to +update the last busy mark before returning from ->probe(). Moreover, the driver core prevents runtime PM callbacks from racing with the bus notifier callback in __device_release_driver(), which is necessary, because the @@ -656,7 +654,7 @@ out the following operations: __pm_runtime_disable() with 'false' as the second argument for every device right before executing the subsystem-level .suspend_late() callback for it. - * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync() + * During system resume it calls pm_runtime_enable() and pm_runtime_put() for every device right after executing the subsystem-level .resume_early() callback and right after executing the subsystem-level .resume() callback for it, respectively. diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index 1039b68fe9c6..93cb97974986 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -39,7 +39,7 @@ New users should use the pwm_get() function and pass to it the consumer device or a consumer name. pwm_put() is used to free the PWM device. Managed variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist. -After being requested a PWM has to be configured using: +After being requested, a PWM has to be configured using: int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns); @@ -94,7 +94,7 @@ for new drivers to use the generic PWM framework. A new PWM controller/chip can be added using pwmchip_add() and removed again with pwmchip_remove(). pwmchip_add() takes a filled in struct pwm_chip as argument which provides a description of the PWM chip, the -number of PWM devices provider by the chip and the chip-specific +number of PWM devices provided by the chip and the chip-specific implementation of the supported PWM operations to the framework. Locking diff --git a/Documentation/security/00-INDEX b/Documentation/security/00-INDEX index 414235c1fcfc..45c82fd3e9d3 100644 --- a/Documentation/security/00-INDEX +++ b/Documentation/security/00-INDEX @@ -22,3 +22,5 @@ keys.txt - description of the kernel key retention service. tomoyo.txt - documentation on the TOMOYO Linux Security Module. +IMA-templates.txt + - documentation on the template management mechanism for IMA. diff --git a/Documentation/security/IMA-templates.txt b/Documentation/security/IMA-templates.txt new file mode 100644 index 000000000000..a777e5f1df5b --- /dev/null +++ b/Documentation/security/IMA-templates.txt @@ -0,0 +1,87 @@ + IMA Template Management Mechanism + + +==== INTRODUCTION ==== + +The original 'ima' template is fixed length, containing the filedata hash +and pathname. The filedata hash is limited to 20 bytes (md5/sha1). +The pathname is a null terminated string, limited to 255 characters. +To overcome these limitations and to add additional file metadata, it is +necessary to extend the current version of IMA by defining additional +templates. For example, information that could be possibly reported are +the inode UID/GID or the LSM labels either of the inode and of the process +that is accessing it. + +However, the main problem to introduce this feature is that, each time +a new template is defined, the functions that generate and display +the measurements list would include the code for handling a new format +and, thus, would significantly grow over the time. + +The proposed solution solves this problem by separating the template +management from the remaining IMA code. The core of this solution is the +definition of two new data structures: a template descriptor, to determine +which information should be included in the measurement list; a template +field, to generate and display data of a given type. + +Managing templates with these structures is very simple. To support +a new data type, developers define the field identifier and implement +two functions, init() and show(), respectively to generate and display +measurement entries. Defining a new template descriptor requires +specifying the template format, a string of field identifiers separated +by the '|' character. While in the current implementation it is possible +to define new template descriptors only by adding their definition in the +template specific code (ima_template.c), in a future version it will be +possible to register a new template on a running kernel by supplying to IMA +the desired format string. In this version, IMA initializes at boot time +all defined template descriptors by translating the format into an array +of template fields structures taken from the set of the supported ones. + +After the initialization step, IMA will call ima_alloc_init_template() +(new function defined within the patches for the new template management +mechanism) to generate a new measurement entry by using the template +descriptor chosen through the kernel configuration or through the newly +introduced 'ima_template=' kernel command line parameter. It is during this +phase that the advantages of the new architecture are clearly shown: +the latter function will not contain specific code to handle a given template +but, instead, it simply calls the init() method of the template fields +associated to the chosen template descriptor and store the result (pointer +to allocated data and data length) in the measurement entry structure. + +The same mechanism is employed to display measurements entries. +The functions ima[_ascii]_measurements_show() retrieve, for each entry, +the template descriptor used to produce that entry and call the show() +method for each item of the array of template fields structures. + + + +==== SUPPORTED TEMPLATE FIELDS AND DESCRIPTORS ==== + +In the following, there is the list of supported template fields +('': description), that can be used to define new template +descriptors by adding their identifier to the format string +(support for more data types will be added later): + + - 'd': the digest of the event (i.e. the digest of a measured file), + calculated with the SHA1 or MD5 hash algorithm; + - 'n': the name of the event (i.e. the file name), with size up to 255 bytes; + - 'd-ng': the digest of the event, calculated with an arbitrary hash + algorithm (field format: [:]digest, where the digest + prefix is shown only if the hash algorithm is not SHA1 or MD5); + - 'n-ng': the name of the event, without size limitations. + + +Below, there is the list of defined template descriptors: + - "ima": its format is 'd|n'; + - "ima-ng" (default): its format is 'd-ng|n-ng'. + + + +==== USE ==== + +To specify the template descriptor to be used to generate measurement entries, +currently the following methods are supported: + + - select a template descriptor among those supported in the kernel + configuration ('ima-ng' is the default choice); + - specify a template descriptor name from the kernel command line through + the 'ima_template=' parameter. diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 7b4145d00452..a4c33f1a7c6d 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -865,15 +865,14 @@ encountered: calling processes has a searchable link to the key from one of its keyrings. There are three functions for dealing with these: - key_ref_t make_key_ref(const struct key *key, - unsigned long possession); + key_ref_t make_key_ref(const struct key *key, bool possession); struct key *key_ref_to_ptr(const key_ref_t key_ref); - unsigned long is_key_possessed(const key_ref_t key_ref); + bool is_key_possessed(const key_ref_t key_ref); The first function constructs a key reference from a key pointer and - possession information (which must be 0 or 1 and not any other value). + possession information (which must be true or false). The second function retrieves the key pointer from a reference and the third retrieves the possession flag. @@ -961,14 +960,17 @@ payload contents" for more information. the argument will not be parsed. -(*) Extra references can be made to a key by calling the following function: +(*) Extra references can be made to a key by calling one of the following + functions: + struct key *__key_get(struct key *key); struct key *key_get(struct key *key); - These need to be disposed of by calling key_put() when they've been - finished with. The key pointer passed in will be returned. If the pointer - is NULL or CONFIG_KEYS is not set then the key will not be dereferenced and - no increment will take place. + Keys so references will need to be disposed of by calling key_put() when + they've been finished with. The key pointer passed in will be returned. + + In the case of key_get(), if the pointer is NULL or CONFIG_KEYS is not set + then the key will not be dereferenced and no increment will take place. (*) A key's serial number can be obtained by calling: diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 54d29c1320ed..230ce71f4d75 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -440,15 +440,15 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " /*\n" buf += " * Setup default attribute lists for various fabric->tf_cit_tmpl\n" buf += " */\n" - buf += " TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = " + fabric_mod_name + "_wwn_attrs;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = NULL;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs = NULL;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL;\n" - buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_wwn_cit.ct_attrs = " + fabric_mod_name + "_wwn_attrs;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_base_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_attrib_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_param_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_np_base_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_base_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_auth_cit.ct_attrs = NULL;\n" + buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_param_cit.ct_attrs = NULL;\n" buf += " /*\n" buf += " * Register the fabric for use within TCM\n" buf += " */\n" diff --git a/Documentation/vm/split_page_table_lock b/Documentation/vm/split_page_table_lock index 7521d367f21d..6dea4fd5c961 100644 --- a/Documentation/vm/split_page_table_lock +++ b/Documentation/vm/split_page_table_lock @@ -63,9 +63,9 @@ levels. PMD split lock enabling requires pgtable_pmd_page_ctor() call on PMD table allocation and pgtable_pmd_page_dtor() on freeing. -Allocation usually happens in pmd_alloc_one(), freeing in pmd_free(), but -make sure you cover all PMD table allocation / freeing paths: i.e X86_PAE -preallocate few PMDs on pgd_alloc(). +Allocation usually happens in pmd_alloc_one(), freeing in pmd_free() and +pmd_free_tlb(), but make sure you cover all PMD table allocation / freeing +paths: i.e X86_PAE preallocate few PMDs on pgd_alloc(). With everything in place you can set CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK. diff --git a/MAINTAINERS b/MAINTAINERS index aef332323256..00b655f117a7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -893,19 +893,14 @@ F: arch/arm/include/asm/hardware/dec21285.h F: arch/arm/mach-footbridge/ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE +M: Shawn Guo M: Sascha Hauer L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -T: git git://git.pengutronix.de/git/imx/linux-2.6.git -F: arch/arm/mach-imx/ -F: arch/arm/configs/imx*_defconfig - -ARM/FREESCALE IMX6 -M: Shawn Guo -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained T: git git://git.linaro.org/people/shawnguo/linux-2.6.git -F: arch/arm/mach-imx/*imx6* +F: arch/arm/mach-imx/ +F: arch/arm/boot/dts/imx* +F: arch/arm/configs/imx*_defconfig ARM/FREESCALE MXS ARM ARCHITECTURE M: Shawn Guo @@ -1070,7 +1065,6 @@ S: Maintained ARM/NOMADIK ARCHITECTURE M: Alessandro Rubini M: Linus Walleij -M: STEricsson L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-nomadik/ @@ -1426,7 +1420,7 @@ M: Wolfram Sang L: linux-i2c@vger.kernel.org S: Maintained F: drivers/misc/eeprom/at24.c -F: include/linux/i2c/at24.h +F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" @@ -1935,7 +1929,8 @@ S: Maintained F: drivers/gpio/gpio-bt8xx.c BTRFS FILE SYSTEM -M: Chris Mason +M: Chris Mason +M: Josef Bacik L: linux-btrfs@vger.kernel.org W: http://btrfs.wiki.kernel.org/ Q: http://patchwork.kernel.org/project/linux-btrfs/list/ @@ -2138,11 +2133,17 @@ S: Maintained F: Documentation/zh_CN/ CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER -M: Alexander Shishkin +M: Peter Chen +T: git://github.com/hzpeterchen/linux-usb.git L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/chipidea/ +CHROME HARDWARE PLATFORM SUPPORT +M: Olof Johansson +S: Maintained +F: drivers/platform/chrome/ + CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti M: Sujith Sankar @@ -2469,7 +2470,7 @@ S: Maintained F: drivers/media/dvb-frontends/cxd2820r* CXGB3 ETHERNET DRIVER (CXGB3) -M: Divy Le Ray +M: Santosh Raspatur L: netdev@vger.kernel.org W: http://www.chelsio.com S: Supported @@ -3064,6 +3065,14 @@ W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/amd64_edac* +EDAC-CALXEDA +M: Doug Thompson +M: Robert Richter +L: linux-edac@vger.kernel.org +W: bluesmoke.sourceforge.net +S: Maintained +F: drivers/edac/highbank* + EDAC-CAVIUM M: Ralf Baechle M: David Daney @@ -3145,6 +3154,13 @@ W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/i82975x_edac.c +EDAC-MPC85XX +M: Johannes Thumshirn +L: linux-edac@vger.kernel.org +W: bluesmoke.sourceforge.net +S: Maintained +F: drivers/edac/mpc85xx_edac.[ch] + EDAC-PASEMI M: Egor Martovetsky L: linux-edac@vger.kernel.org @@ -4024,12 +4040,26 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi S: Maintained F: fs/hpfs/ +HSI SUBSYSTEM +M: Sebastian Reichel +S: Maintained +F: Documentation/ABI/testing/sysfs-bus-hsi +F: drivers/hsi/ +F: include/linux/hsi/ +F: include/uapi/linux/hsi/ + HSO 3G MODEM DRIVER M: Jan Dumon W: http://www.pharscape.org S: Maintained F: drivers/net/usb/hso.c +HSR NETWORK PROTOCOL +M: Arvid Brodin +L: netdev@vger.kernel.org +S: Maintained +F: net/hsr/ + HTCPEN TOUCHSCREEN DRIVER M: Pau Oliva Fora L: linux-input@vger.kernel.org @@ -4051,6 +4081,7 @@ F: arch/x86/include/uapi/asm/hyperv.h F: arch/x86/kernel/cpu/mshyperv.c F: drivers/hid/hid-hyperv.c F: drivers/hv/ +F: drivers/input/serio/hyperv-keyboard.c F: drivers/net/hyperv/ F: drivers/scsi/storvsc_drv.c F: drivers/video/hyperv_fb.c @@ -5241,7 +5272,7 @@ S: Maintained F: Documentation/lockdep*.txt F: Documentation/lockstat.txt F: include/linux/lockdep.h -F: kernel/lockdep* +F: kernel/locking/ LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks) M: "Richard Russon (FlatCap)" @@ -5953,10 +5984,10 @@ F: drivers/nfc/ F: include/linux/platform_data/pn544.h NFS, SUNRPC, AND LOCKD CLIENTS -M: Trond Myklebust +M: Trond Myklebust L: linux-nfs@vger.kernel.org W: http://client.linux-nfs.org -T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git +T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git S: Maintained F: fs/lockd/ F: fs/nfs/ @@ -6223,8 +6254,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS M: Rob Herring M: Pawel Moll M: Mark Rutland -M: Stephen Warren M: Ian Campbell +M: Kumar Gala L: devicetree@vger.kernel.org S: Maintained F: Documentation/devicetree/ @@ -6785,8 +6816,7 @@ PWM SUBSYSTEM M: Thierry Reding L: linux-pwm@vger.kernel.org S: Maintained -W: http://gitorious.org/linux-pwm -T: git git://gitorious.org/linux-pwm/linux-pwm.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git F: Documentation/pwm.txt F: Documentation/devicetree/bindings/pwm/ F: include/linux/pwm.h @@ -7366,7 +7396,6 @@ S: Maintained F: kernel/sched/ F: include/linux/sched.h F: include/uapi/linux/sched.h -F: kernel/wait.c F: include/linux/wait.h SCORE ARCHITECTURE @@ -7502,9 +7531,10 @@ SELINUX SECURITY MODULE M: Stephen Smalley M: James Morris M: Eric Paris +M: Paul Moore L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org -T: git git://git.infradead.org/users/eparis/selinux.git +T: git git://git.infradead.org/users/pcmoore/selinux S: Supported F: include/linux/selinux* F: security/selinux/ @@ -8651,6 +8681,7 @@ F: drivers/media/usb/tm6000/ TPM DEVICE DRIVER M: Leonidas Da Silva Barbosa M: Ashley Lai +M: Peter Huewe M: Rajiv Andrade W: http://tpmdd.sourceforge.net M: Marcel Selhorst @@ -8947,8 +8978,8 @@ USB PEGASUS DRIVER M: Petko Manolov L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org -T: git git://git.code.sf.net/p/pegasus2/git -W: http://pegasus2.sourceforge.net/ +T: git git://github.com/petkan/pegasus.git +W: https://github.com/petkan/pegasus S: Maintained F: drivers/net/usb/pegasus.* @@ -8969,8 +9000,8 @@ USB RTL8150 DRIVER M: Petko Manolov L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org -T: git git://git.code.sf.net/p/pegasus2/git -W: http://pegasus2.sourceforge.net/ +T: git git://github.com/petkan/rtl8150.git +W: https://github.com/petkan/rtl8150 S: Maintained F: drivers/net/usb/rtl8150.c @@ -9509,8 +9540,8 @@ F: drivers/xen/*swiotlb* XFS FILESYSTEM P: Silicon Graphics Inc +M: Dave Chinner M: Ben Myers -M: Alex Elder M: xfs@oss.sgi.com L: xfs@oss.sgi.com W: http://oss.sgi.com/projects/xfs diff --git a/Makefile b/Makefile index 920ad07180c9..890392f1c7c0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 -PATCHLEVEL = 12 +PATCHLEVEL = 13 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc3 NAME = One Giant Leap for Frogkind # *DOCUMENTATION* diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 135c674eaf9e..d39dc9b95a2c 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -16,8 +16,8 @@ config ALPHA select ARCH_WANT_IPC_PARSE_VERSION select ARCH_HAVE_NMI_SAFE_CMPXCHG select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select GENERIC_CLOCKEVENTS select GENERIC_SMP_IDLE_THREAD - select GENERIC_CMOS_UPDATE select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_MOD_ARCH_SPECIFIC @@ -488,6 +488,20 @@ config VGA_HOSE which always have multiple hoses, and whose consoles support it. +config ALPHA_QEMU + bool "Run under QEMU emulation" + depends on !ALPHA_GENERIC + ---help--- + Assume the presence of special features supported by QEMU PALcode + that reduce the overhead of system emulation. + + Generic kernels will auto-detect QEMU. But when building a + system-specific kernel, the assumption is that we want to + elimiate as many runtime tests as possible. + + If unsure, say N. + + config ALPHA_SRM bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME depends on TTY @@ -572,6 +586,30 @@ config NUMA Access). This option is for configuring high-end multiprocessor server machines. If in doubt, say N. +config ALPHA_WTINT + bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC + default y if ALPHA_QEMU + default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA) + default n if !ALPHA_SRM && !ALPHA_GENERIC + default y if SMP + ---help--- + The Wait for Interrupt (WTINT) PALcall attempts to place the CPU + to sleep until the next interrupt. This may reduce the power + consumed, and the heat produced by the computer. However, it has + the side effect of making the cycle counter unreliable as a timing + device across the sleep. + + For emulation under QEMU, definitely say Y here, as we have other + mechanisms for measuring time than the cycle counter. + + For EV4 (but not LCA), EV5 and EV56 systems, or for systems running + MILO, sleep mode is not supported so you might as well say N here. + + For SMP systems we cannot use the cycle counter for timing anyway, + so you might as well say Y here. + + If unsure, say N. + config NODES_SHIFT int default "7" @@ -613,9 +651,41 @@ config VERBOSE_MCHECK_ON Take the default (1) unless you want more control or more info. +choice + prompt "Timer interrupt frequency (HZ)?" + default HZ_128 if ALPHA_QEMU + default HZ_1200 if ALPHA_RAWHIDE + default HZ_1024 + ---help--- + The frequency at which timer interrupts occur. A high frequency + minimizes latency, whereas a low frequency minimizes overhead of + process accounting. The later effect is especially significant + when being run under QEMU. + + Note that some Alpha hardware cannot change the interrupt frequency + of the timer. If unsure, say 1024 (or 1200 for Rawhide). + + config HZ_32 + bool "32 Hz" + config HZ_64 + bool "64 Hz" + config HZ_128 + bool "128 Hz" + config HZ_256 + bool "256 Hz" + config HZ_1024 + bool "1024 Hz" + config HZ_1200 + bool "1200 Hz" +endchoice + config HZ - int - default 1200 if ALPHA_RAWHIDE + int + default 32 if HZ_32 + default 64 if HZ_64 + default 128 if HZ_128 + default 256 if HZ_256 + default 1200 if HZ_1200 default 1024 source "drivers/pci/Kconfig" diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h index 72dbf2359270..75cb3641ed2f 100644 --- a/arch/alpha/include/asm/machvec.h +++ b/arch/alpha/include/asm/machvec.h @@ -33,6 +33,7 @@ struct alpha_machine_vector int nr_irqs; int rtc_port; + int rtc_boot_cpu_only; unsigned int max_asn; unsigned long max_isa_dma_address; unsigned long irq_probe_mask; @@ -95,9 +96,6 @@ struct alpha_machine_vector struct _alpha_agp_info *(*agp_info)(void); - unsigned int (*rtc_get_time)(struct rtc_time *); - int (*rtc_set_time)(struct rtc_time *); - const char *vector_name; /* NUMA information */ @@ -126,13 +124,19 @@ extern struct alpha_machine_vector alpha_mv; #ifdef CONFIG_ALPHA_GENERIC extern int alpha_using_srm; +extern int alpha_using_qemu; #else -#ifdef CONFIG_ALPHA_SRM -#define alpha_using_srm 1 -#else -#define alpha_using_srm 0 -#endif +# ifdef CONFIG_ALPHA_SRM +# define alpha_using_srm 1 +# else +# define alpha_using_srm 0 +# endif +# ifdef CONFIG_ALPHA_QEMU +# define alpha_using_qemu 1 +# else +# define alpha_using_qemu 0 +# endif #endif /* GENERIC */ -#endif +#endif /* __KERNEL__ */ #endif /* __ALPHA_MACHVEC_H */ diff --git a/arch/alpha/include/asm/pal.h b/arch/alpha/include/asm/pal.h index 6fcd2b5b08f0..5422a47646fc 100644 --- a/arch/alpha/include/asm/pal.h +++ b/arch/alpha/include/asm/pal.h @@ -89,6 +89,7 @@ __CALL_PAL_W1(wrmces, unsigned long); __CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long); __CALL_PAL_W1(wrusp, unsigned long); __CALL_PAL_W1(wrvptptr, unsigned long); +__CALL_PAL_RW1(wtint, unsigned long, unsigned long); /* * TB routines.. @@ -111,5 +112,75 @@ __CALL_PAL_W1(wrvptptr, unsigned long); #define tbiap() __tbi(-1, /* no second argument */) #define tbia() __tbi(-2, /* no second argument */) +/* + * QEMU Cserv routines.. + */ + +static inline unsigned long +qemu_get_walltime(void) +{ + register unsigned long v0 __asm__("$0"); + register unsigned long a0 __asm__("$16") = 3; + + asm("call_pal %2 # cserve get_time" + : "=r"(v0), "+r"(a0) + : "i"(PAL_cserve) + : "$17", "$18", "$19", "$20", "$21"); + + return v0; +} + +static inline unsigned long +qemu_get_alarm(void) +{ + register unsigned long v0 __asm__("$0"); + register unsigned long a0 __asm__("$16") = 4; + + asm("call_pal %2 # cserve get_alarm" + : "=r"(v0), "+r"(a0) + : "i"(PAL_cserve) + : "$17", "$18", "$19", "$20", "$21"); + + return v0; +} + +static inline void +qemu_set_alarm_rel(unsigned long expire) +{ + register unsigned long a0 __asm__("$16") = 5; + register unsigned long a1 __asm__("$17") = expire; + + asm volatile("call_pal %2 # cserve set_alarm_rel" + : "+r"(a0), "+r"(a1) + : "i"(PAL_cserve) + : "$0", "$18", "$19", "$20", "$21"); +} + +static inline void +qemu_set_alarm_abs(unsigned long expire) +{ + register unsigned long a0 __asm__("$16") = 6; + register unsigned long a1 __asm__("$17") = expire; + + asm volatile("call_pal %2 # cserve set_alarm_abs" + : "+r"(a0), "+r"(a1) + : "i"(PAL_cserve) + : "$0", "$18", "$19", "$20", "$21"); +} + +static inline unsigned long +qemu_get_vmtime(void) +{ + register unsigned long v0 __asm__("$0"); + register unsigned long a0 __asm__("$16") = 7; + + asm("call_pal %2 # cserve get_time" + : "=r"(v0), "+r"(a0) + : "i"(PAL_cserve) + : "$17", "$18", "$19", "$20", "$21"); + + return v0; +} + #endif /* !__ASSEMBLY__ */ #endif /* __ALPHA_PAL_H */ diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h index d70408d36677..f71c3b0ed360 100644 --- a/arch/alpha/include/asm/rtc.h +++ b/arch/alpha/include/asm/rtc.h @@ -1,12 +1 @@ -#ifndef _ALPHA_RTC_H -#define _ALPHA_RTC_H - -#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \ - || defined(CONFIG_ALPHA_GENERIC) -# define get_rtc_time alpha_mv.rtc_get_time -# define set_rtc_time alpha_mv.rtc_set_time -#endif - #include - -#endif diff --git a/arch/alpha/include/asm/string.h b/arch/alpha/include/asm/string.h index b02b8a282940..c2911f591704 100644 --- a/arch/alpha/include/asm/string.h +++ b/arch/alpha/include/asm/string.h @@ -22,15 +22,27 @@ extern void * __memcpy(void *, const void *, size_t); #define __HAVE_ARCH_MEMSET extern void * __constant_c_memset(void *, unsigned long, size_t); +extern void * ___memset(void *, int, size_t); extern void * __memset(void *, int, size_t); extern void * memset(void *, int, size_t); -#define memset(s, c, n) \ -(__builtin_constant_p(c) \ - ? (__builtin_constant_p(n) && (c) == 0 \ - ? __builtin_memset((s),0,(n)) \ - : __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \ - : __memset((s),(c),(n))) +/* For gcc 3.x, we cannot have the inline function named "memset" because + the __builtin_memset will attempt to resolve to the inline as well, + leading to a "sorry" about unimplemented recursive inlining. */ +extern inline void *__memset(void *s, int c, size_t n) +{ + if (__builtin_constant_p(c)) { + if (__builtin_constant_p(n)) { + return __builtin_memset(s, c, n); + } else { + unsigned long c8 = (c & 0xff) * 0x0101010101010101UL; + return __constant_c_memset(s, c8, n); + } + } + return ___memset(s, c, n); +} + +#define memset __memset #define __HAVE_ARCH_STRCPY extern char * strcpy(char *,const char *); diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 52cd2a4a3ff4..453597b91f3a 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -58,8 +58,6 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define THREAD_SIZE_ORDER 1 #define THREAD_SIZE (2*PAGE_SIZE) -#define PREEMPT_ACTIVE 0x40000000 - /* * Thread information flags: * - these are process state flags and used from assembly diff --git a/arch/alpha/include/uapi/asm/pal.h b/arch/alpha/include/uapi/asm/pal.h index 3c0ce08e5f59..dfc8140b9088 100644 --- a/arch/alpha/include/uapi/asm/pal.h +++ b/arch/alpha/include/uapi/asm/pal.h @@ -46,6 +46,7 @@ #define PAL_rdusp 58 #define PAL_whami 60 #define PAL_retsys 61 +#define PAL_wtint 62 #define PAL_rti 63 diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index 84ec46b38f7d..0d54650e78fc 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_PCI) += pci.o pci_iommu.o pci-sysfs.o obj-$(CONFIG_SRM_ENV) += srm_env.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_RTC_DRV_ALPHA) += rtc.o ifdef CONFIG_ALPHA_GENERIC diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index 89566b346c0f..f4c7ab6f43b0 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -40,6 +40,7 @@ EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(__memcpy); EXPORT_SYMBOL(__memset); +EXPORT_SYMBOL(___memset); EXPORT_SYMBOL(__memsetw); EXPORT_SYMBOL(__constant_c_memset); EXPORT_SYMBOL(copy_page); diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 28e4429596f3..1c8625cb0e25 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -66,21 +66,7 @@ do_entInt(unsigned long type, unsigned long vector, break; case 1: old_regs = set_irq_regs(regs); -#ifdef CONFIG_SMP - { - long cpu; - - smp_percpu_timer_interrupt(regs); - cpu = smp_processor_id(); - if (cpu != boot_cpuid) { - kstat_incr_irqs_this_cpu(RTC_IRQ, irq_to_desc(RTC_IRQ)); - } else { - handle_irq(RTC_IRQ); - } - } -#else handle_irq(RTC_IRQ); -#endif set_irq_regs(old_regs); return; case 2: @@ -228,7 +214,7 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr, */ struct irqaction timer_irqaction = { - .handler = timer_interrupt, + .handler = rtc_timer_interrupt, .name = "timer", }; diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h index 7fa62488bd16..f54bdf658cd0 100644 --- a/arch/alpha/kernel/machvec_impl.h +++ b/arch/alpha/kernel/machvec_impl.h @@ -43,10 +43,7 @@ #define CAT1(x,y) x##y #define CAT(x,y) CAT1(x,y) -#define DO_DEFAULT_RTC \ - .rtc_port = 0x70, \ - .rtc_get_time = common_get_rtc_time, \ - .rtc_set_time = common_set_rtc_time +#define DO_DEFAULT_RTC .rtc_port = 0x70 #define DO_EV4_MMU \ .max_asn = EV4_MAX_ASN, \ diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c index d821b17047e0..c52e7f0ee5f6 100644 --- a/arch/alpha/kernel/perf_event.c +++ b/arch/alpha/kernel/perf_event.c @@ -83,6 +83,8 @@ struct alpha_pmu_t { long pmc_left[3]; /* Subroutine for allocation of PMCs. Enforces constraints. */ int (*check_constraints)(struct perf_event **, unsigned long *, int); + /* Subroutine for checking validity of a raw event for this PMU. */ + int (*raw_event_valid)(u64 config); }; /* @@ -203,6 +205,12 @@ success: } +static int ev67_raw_event_valid(u64 config) +{ + return config >= EV67_CYCLES && config < EV67_LAST_ET; +}; + + static const struct alpha_pmu_t ev67_pmu = { .event_map = ev67_perfmon_event_map, .max_events = ARRAY_SIZE(ev67_perfmon_event_map), @@ -211,7 +219,8 @@ static const struct alpha_pmu_t ev67_pmu = { .pmc_count_mask = {EV67_PCTR_0_COUNT_MASK, EV67_PCTR_1_COUNT_MASK, 0}, .pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0}, .pmc_left = {16, 4, 0}, - .check_constraints = ev67_check_constraints + .check_constraints = ev67_check_constraints, + .raw_event_valid = ev67_raw_event_valid, }; @@ -609,7 +618,9 @@ static int __hw_perf_event_init(struct perf_event *event) } else if (attr->type == PERF_TYPE_HW_CACHE) { return -EOPNOTSUPP; } else if (attr->type == PERF_TYPE_RAW) { - ev = attr->config & 0xff; + if (!alpha_pmu->raw_event_valid(attr->config)) + return -EINVAL; + ev = attr->config; } else { return -EOPNOTSUPP; } diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index f2360a74e5d5..1941a07b5811 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -46,6 +46,23 @@ void (*pm_power_off)(void) = machine_power_off; EXPORT_SYMBOL(pm_power_off); +#ifdef CONFIG_ALPHA_WTINT +/* + * Sleep the CPU. + * EV6, LCA45 and QEMU know how to power down, skipping N timer interrupts. + */ +void arch_cpu_idle(void) +{ + wtint(0); + local_irq_enable(); +} + +void arch_cpu_idle_dead(void) +{ + wtint(INT_MAX); +} +#endif /* ALPHA_WTINT */ + struct halt_info { int mode; char *restart_cmd; diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h index d3e52d3fd592..da2d6ec9c370 100644 --- a/arch/alpha/kernel/proto.h +++ b/arch/alpha/kernel/proto.h @@ -135,17 +135,15 @@ extern void unregister_srm_console(void); /* smp.c */ extern void setup_smp(void); extern void handle_ipi(struct pt_regs *); -extern void smp_percpu_timer_interrupt(struct pt_regs *); /* bios32.c */ /* extern void reset_for_srm(void); */ /* time.c */ -extern irqreturn_t timer_interrupt(int irq, void *dev); +extern irqreturn_t rtc_timer_interrupt(int irq, void *dev); +extern void init_clockevent(void); extern void common_init_rtc(void); extern unsigned long est_cycle_freq; -extern unsigned int common_get_rtc_time(struct rtc_time *time); -extern int common_set_rtc_time(struct rtc_time *time); /* smc37c93x.c */ extern void SMC93x_Init(void); diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c new file mode 100644 index 000000000000..c8d284d8521f --- /dev/null +++ b/arch/alpha/kernel/rtc.c @@ -0,0 +1,323 @@ +/* + * linux/arch/alpha/kernel/rtc.c + * + * Copyright (C) 1991, 1992, 1995, 1999, 2000 Linus Torvalds + * + * This file contains date handling. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "proto.h" + + +/* + * Support for the RTC device. + * + * We don't want to use the rtc-cmos driver, because we don't want to support + * alarms, as that would be indistinguishable from timer interrupts. + * + * Further, generic code is really, really tied to a 1900 epoch. This is + * true in __get_rtc_time as well as the users of struct rtc_time e.g. + * rtc_tm_to_time. Thankfully all of the other epochs in use are later + * than 1900, and so it's easy to adjust. + */ + +static unsigned long rtc_epoch; + +static int __init +specifiy_epoch(char *str) +{ + unsigned long epoch = simple_strtoul(str, NULL, 0); + if (epoch < 1900) + printk("Ignoring invalid user specified epoch %lu\n", epoch); + else + rtc_epoch = epoch; + return 1; +} +__setup("epoch=", specifiy_epoch); + +static void __init +init_rtc_epoch(void) +{ + int epoch, year, ctrl; + + if (rtc_epoch != 0) { + /* The epoch was specified on the command-line. */ + return; + } + + /* Detect the epoch in use on this computer. */ + ctrl = CMOS_READ(RTC_CONTROL); + year = CMOS_READ(RTC_YEAR); + if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + year = bcd2bin(year); + + /* PC-like is standard; used for year >= 70 */ + epoch = 1900; + if (year < 20) { + epoch = 2000; + } else if (year >= 20 && year < 48) { + /* NT epoch */ + epoch = 1980; + } else if (year >= 48 && year < 70) { + /* Digital UNIX epoch */ + epoch = 1952; + } + rtc_epoch = epoch; + + printk(KERN_INFO "Using epoch %d for rtc year %d\n", epoch, year); +} + +static int +alpha_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + __get_rtc_time(tm); + + /* Adjust for non-default epochs. It's easier to depend on the + generic __get_rtc_time and adjust the epoch here than create + a copy of __get_rtc_time with the edits we need. */ + if (rtc_epoch != 1900) { + int year = tm->tm_year; + /* Undo the century adjustment made in __get_rtc_time. */ + if (year >= 100) + year -= 100; + year += rtc_epoch - 1900; + /* Redo the century adjustment with the epoch in place. */ + if (year <= 69) + year += 100; + tm->tm_year = year; + } + + return rtc_valid_tm(tm); +} + +static int +alpha_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct rtc_time xtm; + + if (rtc_epoch != 1900) { + xtm = *tm; + xtm.tm_year -= rtc_epoch - 1900; + tm = &xtm; + } + + return __set_rtc_time(tm); +} + +static int +alpha_rtc_set_mmss(struct device *dev, unsigned long nowtime) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned char save_control, save_freq_select; + + /* Note: This code only updates minutes and seconds. Comments + indicate this was to avoid messing with unknown time zones, + and with the epoch nonsense described above. In order for + this to work, the existing clock cannot be off by more than + 15 minutes. + + ??? This choice is may be out of date. The x86 port does + not have problems with timezones, and the epoch processing has + now been fixed in alpha_set_rtc_time. + + In either case, one can always force a full rtc update with + the userland hwclock program, so surely 15 minute accuracy + is no real burden. */ + + /* In order to set the CMOS clock precisely, we have to be called + 500 ms after the second nowtime has started, because when + nowtime is written into the registers of the CMOS clock, it will + jump to the next second precisely 500 ms later. Check the Motorola + MC146818A or Dallas DS12887 data sheet for details. */ + + /* irq are locally disabled here */ + spin_lock(&rtc_lock); + /* Tell the clock it's being set */ + save_control = CMOS_READ(RTC_CONTROL); + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); + + /* Stop and reset prescaler */ + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + cmos_minutes = CMOS_READ(RTC_MINUTES); + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + cmos_minutes = bcd2bin(cmos_minutes); + + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) { + /* correct for half hour time zone */ + real_minutes += 30; + } + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + real_seconds = bin2bcd(real_seconds); + real_minutes = bin2bcd(real_minutes); + } + CMOS_WRITE(real_seconds,RTC_SECONDS); + CMOS_WRITE(real_minutes,RTC_MINUTES); + } else { + printk_once(KERN_NOTICE + "set_rtc_mmss: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock(&rtc_lock); + + return retval; +} + +static int +alpha_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case RTC_EPOCH_READ: + return put_user(rtc_epoch, (unsigned long __user *)arg); + case RTC_EPOCH_SET: + if (arg < 1900) + return -EINVAL; + rtc_epoch = arg; + return 0; + default: + return -ENOIOCTLCMD; + } +} + +static const struct rtc_class_ops alpha_rtc_ops = { + .read_time = alpha_rtc_read_time, + .set_time = alpha_rtc_set_time, + .set_mmss = alpha_rtc_set_mmss, + .ioctl = alpha_rtc_ioctl, +}; + +/* + * Similarly, except do the actual CMOS access on the boot cpu only. + * This requires marshalling the data across an interprocessor call. + */ + +#if defined(CONFIG_SMP) && \ + (defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_MARVEL)) +# define HAVE_REMOTE_RTC 1 + +union remote_data { + struct rtc_time *tm; + unsigned long now; + long retval; +}; + +static void +do_remote_read(void *data) +{ + union remote_data *x = data; + x->retval = alpha_rtc_read_time(NULL, x->tm); +} + +static int +remote_read_time(struct device *dev, struct rtc_time *tm) +{ + union remote_data x; + if (smp_processor_id() != boot_cpuid) { + x.tm = tm; + smp_call_function_single(boot_cpuid, do_remote_read, &x, 1); + return x.retval; + } + return alpha_rtc_read_time(NULL, tm); +} + +static void +do_remote_set(void *data) +{ + union remote_data *x = data; + x->retval = alpha_rtc_set_time(NULL, x->tm); +} + +static int +remote_set_time(struct device *dev, struct rtc_time *tm) +{ + union remote_data x; + if (smp_processor_id() != boot_cpuid) { + x.tm = tm; + smp_call_function_single(boot_cpuid, do_remote_set, &x, 1); + return x.retval; + } + return alpha_rtc_set_time(NULL, tm); +} + +static void +do_remote_mmss(void *data) +{ + union remote_data *x = data; + x->retval = alpha_rtc_set_mmss(NULL, x->now); +} + +static int +remote_set_mmss(struct device *dev, unsigned long now) +{ + union remote_data x; + if (smp_processor_id() != boot_cpuid) { + x.now = now; + smp_call_function_single(boot_cpuid, do_remote_mmss, &x, 1); + return x.retval; + } + return alpha_rtc_set_mmss(NULL, now); +} + +static const struct rtc_class_ops remote_rtc_ops = { + .read_time = remote_read_time, + .set_time = remote_set_time, + .set_mmss = remote_set_mmss, + .ioctl = alpha_rtc_ioctl, +}; +#endif + +static int __init +alpha_rtc_init(void) +{ + const struct rtc_class_ops *ops; + struct platform_device *pdev; + struct rtc_device *rtc; + const char *name; + + init_rtc_epoch(); + name = "rtc-alpha"; + ops = &alpha_rtc_ops; + +#ifdef HAVE_REMOTE_RTC + if (alpha_mv.rtc_boot_cpu_only) + ops = &remote_rtc_ops; +#endif + + pdev = platform_device_register_simple(name, -1, NULL, 0); + rtc = devm_rtc_device_register(&pdev->dev, name, ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); + return 0; +} +device_initcall(alpha_rtc_init); diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index 9e3107cc5ebb..b20af76f12c1 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -115,10 +115,17 @@ unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE; #ifdef CONFIG_ALPHA_GENERIC struct alpha_machine_vector alpha_mv; +#endif + +#ifndef alpha_using_srm int alpha_using_srm; EXPORT_SYMBOL(alpha_using_srm); #endif +#ifndef alpha_using_qemu +int alpha_using_qemu; +#endif + static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long, unsigned long); static struct alpha_machine_vector *get_sysvec_byname(const char *); @@ -529,11 +536,15 @@ setup_arch(char **cmdline_p) atomic_notifier_chain_register(&panic_notifier_list, &alpha_panic_block); -#ifdef CONFIG_ALPHA_GENERIC +#ifndef alpha_using_srm /* Assume that we've booted from SRM if we haven't booted from MILO. Detect the later by looking for "MILO" in the system serial nr. */ alpha_using_srm = strncmp((const char *)hwrpb->ssn, "MILO", 4) != 0; #endif +#ifndef alpha_using_qemu + /* Similarly, look for QEMU. */ + alpha_using_qemu = strstr((const char *)hwrpb->ssn, "QEMU") != 0; +#endif /* If we are using SRM, we want to allow callbacks as early as possible, so do this NOW, and then @@ -1207,6 +1218,7 @@ show_cpuinfo(struct seq_file *f, void *slot) char *systype_name; char *sysvariation_name; int nr_processors; + unsigned long timer_freq; cpu_index = (unsigned) (cpu->type - 1); cpu_name = "Unknown"; @@ -1218,6 +1230,12 @@ show_cpuinfo(struct seq_file *f, void *slot) nr_processors = get_nr_processors(cpu, hwrpb->nr_processors); +#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200 + timer_freq = (100UL * hwrpb->intr_freq) / 4096; +#else + timer_freq = 100UL * CONFIG_HZ; +#endif + seq_printf(f, "cpu\t\t\t: Alpha\n" "cpu model\t\t: %s\n" "cpu variation\t\t: %ld\n" @@ -1243,8 +1261,7 @@ show_cpuinfo(struct seq_file *f, void *slot) (char*)hwrpb->ssn, est_cycle_freq ? : hwrpb->cycle_freq, est_cycle_freq ? "est." : "", - hwrpb->intr_freq / 4096, - (100 * hwrpb->intr_freq / 4096) % 100, + timer_freq / 100, timer_freq % 100, hwrpb->pagesize, hwrpb->pa_bits, hwrpb->max_asn, diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 9dbbcb3b9146..99ac36d5de4e 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -138,9 +138,11 @@ smp_callin(void) /* Get our local ticker going. */ smp_setup_percpu_timer(cpuid); + init_clockevent(); /* Call platform-specific callin, if specified */ - if (alpha_mv.smp_callin) alpha_mv.smp_callin(); + if (alpha_mv.smp_callin) + alpha_mv.smp_callin(); /* All kernel threads share the same mm context. */ atomic_inc(&init_mm.mm_count); @@ -498,35 +500,6 @@ smp_cpus_done(unsigned int max_cpus) ((bogosum + 2500) / (5000/HZ)) % 100); } - -void -smp_percpu_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs; - int cpu = smp_processor_id(); - unsigned long user = user_mode(regs); - struct cpuinfo_alpha *data = &cpu_data[cpu]; - - old_regs = set_irq_regs(regs); - - /* Record kernel PC. */ - profile_tick(CPU_PROFILING); - - if (!--data->prof_counter) { - /* We need to make like a normal interrupt -- otherwise - timer interrupts ignore the global interrupt lock, - which would be a Bad Thing. */ - irq_enter(); - - update_process_times(user); - - data->prof_counter = data->prof_multiplier; - - irq_exit(); - } - set_irq_regs(old_regs); -} - int setup_profiling_timer(unsigned int multiplier) { diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c index 5a0af11b3a61..608f2a7fa0a3 100644 --- a/arch/alpha/kernel/sys_jensen.c +++ b/arch/alpha/kernel/sys_jensen.c @@ -224,8 +224,6 @@ struct alpha_machine_vector jensen_mv __initmv = { .machine_check = jensen_machine_check, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, .rtc_port = 0x170, - .rtc_get_time = common_get_rtc_time, - .rtc_set_time = common_set_rtc_time, .nr_irqs = 16, .device_interrupt = jensen_device_interrupt, diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index c92e389ff219..f21d61fab678 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -22,7 +22,6 @@ #include #include #include -#include #include "proto.h" #include "err_impl.h" @@ -400,57 +399,6 @@ marvel_init_rtc(void) init_rtc_irq(); } -struct marvel_rtc_time { - struct rtc_time *time; - int retval; -}; - -#ifdef CONFIG_SMP -static void -smp_get_rtc_time(void *data) -{ - struct marvel_rtc_time *mrt = data; - mrt->retval = __get_rtc_time(mrt->time); -} - -static void -smp_set_rtc_time(void *data) -{ - struct marvel_rtc_time *mrt = data; - mrt->retval = __set_rtc_time(mrt->time); -} -#endif - -static unsigned int -marvel_get_rtc_time(struct rtc_time *time) -{ -#ifdef CONFIG_SMP - struct marvel_rtc_time mrt; - - if (smp_processor_id() != boot_cpuid) { - mrt.time = time; - smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1); - return mrt.retval; - } -#endif - return __get_rtc_time(time); -} - -static int -marvel_set_rtc_time(struct rtc_time *time) -{ -#ifdef CONFIG_SMP - struct marvel_rtc_time mrt; - - if (smp_processor_id() != boot_cpuid) { - mrt.time = time; - smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1); - return mrt.retval; - } -#endif - return __set_rtc_time(time); -} - static void marvel_smp_callin(void) { @@ -492,8 +440,7 @@ struct alpha_machine_vector marvel_ev7_mv __initmv = { .vector_name = "MARVEL/EV7", DO_EV7_MMU, .rtc_port = 0x70, - .rtc_get_time = marvel_get_rtc_time, - .rtc_set_time = marvel_set_rtc_time, + .rtc_boot_cpu_only = 1, DO_MARVEL_IO, .machine_check = marvel_machine_check, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index ea3395036556..ee39cee8064c 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -3,13 +3,7 @@ * * Copyright (C) 1991, 1992, 1995, 1999, 2000 Linus Torvalds * - * This file contains the PC-specific time handling details: - * reading the RTC at bootup, etc.. - * 1994-07-02 Alan Modra - * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime - * 1995-03-26 Markus Kuhn - * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887 - * precision CMOS clock update + * This file contains the clocksource time handling. * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 * "A Kernel Model for Precision Timekeeping" by Dave Mills * 1997-01-09 Adrian Sun @@ -21,9 +15,6 @@ * 1999-04-16 Thorsten Kranzkowski (dl8bcu@gmx.net) * fixed algorithm in do_gettimeofday() for calculating the precise time * from processor cycle counter (now taking lost_ticks into account) - * 2000-08-13 Jan-Benedict Glaw - * Fixed time_init to be aware of epoches != 1900. This prevents - * booting up in 2048 for me;) Code is stolen from rtc.c. * 2003-06-03 R. Scott Bailey * Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM */ @@ -46,40 +37,19 @@ #include #include #include -#include #include #include #include #include +#include #include "proto.h" #include "irq_impl.h" -static int set_rtc_mmss(unsigned long); - DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -#define TICK_SIZE (tick_nsec / 1000) - -/* - * Shift amount by which scaled_ticks_per_cycle is scaled. Shifting - * by 48 gives us 16 bits for HZ while keeping the accuracy good even - * for large CPU clock rates. - */ -#define FIX_SHIFT 48 - -/* lump static variables together for more efficient access: */ -static struct { - /* cycle counter last time it got invoked */ - __u32 last_time; - /* ticks/cycle * 2^48 */ - unsigned long scaled_ticks_per_cycle; - /* partial unused tick */ - unsigned long partial_tick; -} state; - unsigned long est_cycle_freq; #ifdef CONFIG_IRQ_WORK @@ -108,109 +78,156 @@ static inline __u32 rpcc(void) return __builtin_alpha_rpcc(); } -int update_persistent_clock(struct timespec now) -{ - return set_rtc_mmss(now.tv_sec); -} - -void read_persistent_clock(struct timespec *ts) -{ - unsigned int year, mon, day, hour, min, sec, epoch; - - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - sec = bcd2bin(sec); - min = bcd2bin(min); - hour = bcd2bin(hour); - day = bcd2bin(day); - mon = bcd2bin(mon); - year = bcd2bin(year); - } - - /* PC-like is standard; used for year >= 70 */ - epoch = 1900; - if (year < 20) - epoch = 2000; - else if (year >= 20 && year < 48) - /* NT epoch */ - epoch = 1980; - else if (year >= 48 && year < 70) - /* Digital UNIX epoch */ - epoch = 1952; - - printk(KERN_INFO "Using epoch = %d\n", epoch); - - if ((year += epoch) < 1970) - year += 100; - - ts->tv_sec = mktime(year, mon, day, hour, min, sec); - ts->tv_nsec = 0; -} - - + /* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "xtime_update()" routine every clocktick + * The RTC as a clock_event_device primitive. */ -irqreturn_t timer_interrupt(int irq, void *dev) + +static DEFINE_PER_CPU(struct clock_event_device, cpu_ce); + +irqreturn_t +rtc_timer_interrupt(int irq, void *dev) { - unsigned long delta; - __u32 now; - long nticks; + int cpu = smp_processor_id(); + struct clock_event_device *ce = &per_cpu(cpu_ce, cpu); -#ifndef CONFIG_SMP - /* Not SMP, do kernel PC profiling here. */ - profile_tick(CPU_PROFILING); -#endif - - /* - * Calculate how many ticks have passed since the last update, - * including any previous partial leftover. Save any resulting - * fraction for the next pass. - */ - now = rpcc(); - delta = now - state.last_time; - state.last_time = now; - delta = delta * state.scaled_ticks_per_cycle + state.partial_tick; - state.partial_tick = delta & ((1UL << FIX_SHIFT) - 1); - nticks = delta >> FIX_SHIFT; - - if (nticks) - xtime_update(nticks); + /* Don't run the hook for UNUSED or SHUTDOWN. */ + if (likely(ce->mode == CLOCK_EVT_MODE_PERIODIC)) + ce->event_handler(ce); if (test_irq_work_pending()) { clear_irq_work_pending(); irq_work_run(); } -#ifndef CONFIG_SMP - while (nticks--) - update_process_times(user_mode(get_irq_regs())); -#endif - return IRQ_HANDLED; } +static void +rtc_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce) +{ + /* The mode member of CE is updated in generic code. + Since we only support periodic events, nothing to do. */ +} + +static int +rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce) +{ + /* This hook is for oneshot mode, which we don't support. */ + return -EINVAL; +} + +static void __init +init_rtc_clockevent(void) +{ + int cpu = smp_processor_id(); + struct clock_event_device *ce = &per_cpu(cpu_ce, cpu); + + *ce = (struct clock_event_device){ + .name = "rtc", + .features = CLOCK_EVT_FEAT_PERIODIC, + .rating = 100, + .cpumask = cpumask_of(cpu), + .set_mode = rtc_ce_set_mode, + .set_next_event = rtc_ce_set_next_event, + }; + + clockevents_config_and_register(ce, CONFIG_HZ, 0, 0); +} + + +/* + * The QEMU clock as a clocksource primitive. + */ + +static cycle_t +qemu_cs_read(struct clocksource *cs) +{ + return qemu_get_vmtime(); +} + +static struct clocksource qemu_cs = { + .name = "qemu", + .rating = 400, + .read = qemu_cs_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .max_idle_ns = LONG_MAX +}; + + +/* + * The QEMU alarm as a clock_event_device primitive. + */ + +static void +qemu_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce) +{ + /* The mode member of CE is updated for us in generic code. + Just make sure that the event is disabled. */ + qemu_set_alarm_abs(0); +} + +static int +qemu_ce_set_next_event(unsigned long evt, struct clock_event_device *ce) +{ + qemu_set_alarm_rel(evt); + return 0; +} + +static irqreturn_t +qemu_timer_interrupt(int irq, void *dev) +{ + int cpu = smp_processor_id(); + struct clock_event_device *ce = &per_cpu(cpu_ce, cpu); + + ce->event_handler(ce); + return IRQ_HANDLED; +} + +static void __init +init_qemu_clockevent(void) +{ + int cpu = smp_processor_id(); + struct clock_event_device *ce = &per_cpu(cpu_ce, cpu); + + *ce = (struct clock_event_device){ + .name = "qemu", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 400, + .cpumask = cpumask_of(cpu), + .set_mode = qemu_ce_set_mode, + .set_next_event = qemu_ce_set_next_event, + }; + + clockevents_config_and_register(ce, NSEC_PER_SEC, 1000, LONG_MAX); +} + + void __init common_init_rtc(void) { - unsigned char x; + unsigned char x, sel = 0; /* Reset periodic interrupt frequency. */ - x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f; - /* Test includes known working values on various platforms - where 0x26 is wrong; we refuse to change those. */ - if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) { - printk("Setting RTC_FREQ to 1024 Hz (%x)\n", x); - CMOS_WRITE(0x26, RTC_FREQ_SELECT); +#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200 + x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f; + /* Test includes known working values on various platforms + where 0x26 is wrong; we refuse to change those. */ + if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) { + sel = RTC_REF_CLCK_32KHZ + 6; } +#elif CONFIG_HZ == 256 || CONFIG_HZ == 128 || CONFIG_HZ == 64 || CONFIG_HZ == 32 + sel = RTC_REF_CLCK_32KHZ + __builtin_ffs(32768 / CONFIG_HZ); +#else +# error "Unknown HZ from arch/alpha/Kconfig" +#endif + if (sel) { + printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n", + CONFIG_HZ, sel); + CMOS_WRITE(sel, RTC_FREQ_SELECT); + } /* Turn on periodic interrupts. */ x = CMOS_READ(RTC_CONTROL); @@ -233,16 +250,37 @@ common_init_rtc(void) init_rtc_irq(); } -unsigned int common_get_rtc_time(struct rtc_time *time) + +#ifndef CONFIG_ALPHA_WTINT +/* + * The RPCC as a clocksource primitive. + * + * While we have free-running timecounters running on all CPUs, and we make + * a half-hearted attempt in init_rtc_rpcc_info to sync the timecounter + * with the wall clock, that initialization isn't kept up-to-date across + * different time counters in SMP mode. Therefore we can only use this + * method when there's only one CPU enabled. + * + * When using the WTINT PALcall, the RPCC may shift to a lower frequency, + * or stop altogether, while waiting for the interrupt. Therefore we cannot + * use this method when WTINT is in use. + */ + +static cycle_t read_rpcc(struct clocksource *cs) { - return __get_rtc_time(time); + return rpcc(); } -int common_set_rtc_time(struct rtc_time *time) -{ - return __set_rtc_time(time); -} +static struct clocksource clocksource_rpcc = { + .name = "rpcc", + .rating = 300, + .read = read_rpcc, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS +}; +#endif /* ALPHA_WTINT */ + /* Validate a computed cycle counter result against the known bounds for the given processor core. There's too much brokenness in the way of timing hardware for any one method to work everywhere. :-( @@ -353,33 +391,6 @@ rpcc_after_update_in_progress(void) return rpcc(); } -#ifndef CONFIG_SMP -/* Until and unless we figure out how to get cpu cycle counters - in sync and keep them there, we can't use the rpcc. */ -static cycle_t read_rpcc(struct clocksource *cs) -{ - cycle_t ret = (cycle_t)rpcc(); - return ret; -} - -static struct clocksource clocksource_rpcc = { - .name = "rpcc", - .rating = 300, - .read = read_rpcc, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS -}; - -static inline void register_rpcc_clocksource(long cycle_freq) -{ - clocksource_register_hz(&clocksource_rpcc, cycle_freq); -} -#else /* !CONFIG_SMP */ -static inline void register_rpcc_clocksource(long cycle_freq) -{ -} -#endif /* !CONFIG_SMP */ - void __init time_init(void) { @@ -387,6 +398,15 @@ time_init(void) unsigned long cycle_freq, tolerance; long diff; + if (alpha_using_qemu) { + clocksource_register_hz(&qemu_cs, NSEC_PER_SEC); + init_qemu_clockevent(); + + timer_irqaction.handler = qemu_timer_interrupt; + init_rtc_irq(); + return; + } + /* Calibrate CPU clock -- attempt #1. */ if (!est_cycle_freq) est_cycle_freq = validate_cc_value(calibrate_cc_with_pit()); @@ -421,100 +441,25 @@ time_init(void) "and unable to estimate a proper value!\n"); } - /* From John Bowman : allow the values - to settle, as the Update-In-Progress bit going low isn't good - enough on some hardware. 2ms is our guess; we haven't found - bogomips yet, but this is close on a 500Mhz box. */ - __delay(1000000); - - - if (HZ > (1<<16)) { - extern void __you_loose (void); - __you_loose(); - } - - register_rpcc_clocksource(cycle_freq); - - state.last_time = cc1; - state.scaled_ticks_per_cycle - = ((unsigned long) HZ << FIX_SHIFT) / cycle_freq; - state.partial_tick = 0L; + /* See above for restrictions on using clocksource_rpcc. */ +#ifndef CONFIG_ALPHA_WTINT + if (hwrpb->nr_processors == 1) + clocksource_register_hz(&clocksource_rpcc, cycle_freq); +#endif /* Startup the timer source. */ alpha_mv.init_rtc(); + init_rtc_clockevent(); } -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be - * called 500 ms after the second nowtime has started, because when - * nowtime is written into the registers of the CMOS clock, it will - * jump to the next second precisely 500 ms later. Check the Motorola - * MC146818A or Dallas DS12887 data sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you won't notice until after reboot! - */ - - -static int -set_rtc_mmss(unsigned long nowtime) +/* Initialize the clock_event_device for secondary cpus. */ +#ifdef CONFIG_SMP +void __init +init_clockevent(void) { - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char save_control, save_freq_select; - - /* irq are locally disabled here */ - spin_lock(&rtc_lock); - /* Tell the clock it's being set */ - save_control = CMOS_READ(RTC_CONTROL); - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - - /* Stop and reset prescaler */ - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - cmos_minutes = bcd2bin(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) { - /* correct for half hour time zone */ - real_minutes += 30; - } - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - real_seconds = bin2bcd(real_seconds); - real_minutes = bin2bcd(real_minutes); - } - CMOS_WRITE(real_seconds,RTC_SECONDS); - CMOS_WRITE(real_minutes,RTC_MINUTES); - } else { - printk_once(KERN_NOTICE - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - spin_unlock(&rtc_lock); - - return retval; + if (alpha_using_qemu) + init_qemu_clockevent(); + else + init_rtc_clockevent(); } +#endif diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index bd0665cdc840..9c4c189eb22f 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -241,6 +241,21 @@ do_entIF(unsigned long type, struct pt_regs *regs) (const char *)(data[1] | (long)data[2] << 32), data[0]); } +#ifdef CONFIG_ALPHA_WTINT + if (type == 4) { + /* If CALL_PAL WTINT is totally unsupported by the + PALcode, e.g. MILO, "emulate" it by overwriting + the insn. */ + unsigned int *pinsn + = (unsigned int *) regs->pc - 1; + if (*pinsn == PAL_wtint) { + *pinsn = 0x47e01400; /* mov 0,$0 */ + imb(); + regs->r0 = 0; + return; + } + } +#endif /* ALPHA_WTINT */ die_if_kernel((type == 1 ? "Kernel Bug" : "Instruction fault"), regs, type, NULL); } diff --git a/arch/alpha/lib/csum_partial_copy.c b/arch/alpha/lib/csum_partial_copy.c index ffb19b7da999..ff3c10721caf 100644 --- a/arch/alpha/lib/csum_partial_copy.c +++ b/arch/alpha/lib/csum_partial_copy.c @@ -130,7 +130,7 @@ csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst, *dst = word | tmp; checksum += carry; } - if (err) *errp = err; + if (err && errp) *errp = err; return checksum; } @@ -185,7 +185,7 @@ csum_partial_cfu_dest_aligned(const unsigned long __user *src, *dst = word | tmp; checksum += carry; } - if (err) *errp = err; + if (err && errp) *errp = err; return checksum; } @@ -242,7 +242,7 @@ csum_partial_cfu_src_aligned(const unsigned long __user *src, stq_u(partial_dest | second_dest, dst); out: checksum += carry; - if (err) *errp = err; + if (err && errp) *errp = err; return checksum; } @@ -325,7 +325,7 @@ csum_partial_cfu_unaligned(const unsigned long __user * src, stq_u(partial_dest | word | second_dest, dst); checksum += carry; } - if (err) *errp = err; + if (err && errp) *errp = err; return checksum; } @@ -339,7 +339,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len, if (len) { if (!access_ok(VERIFY_READ, src, len)) { - *errp = -EFAULT; + if (errp) *errp = -EFAULT; memset(dst, 0, len); return sum; } diff --git a/arch/alpha/lib/ev6-memset.S b/arch/alpha/lib/ev6-memset.S index d8b94e1c7fca..356bb2fdd705 100644 --- a/arch/alpha/lib/ev6-memset.S +++ b/arch/alpha/lib/ev6-memset.S @@ -30,14 +30,15 @@ .set noat .set noreorder .text + .globl memset .globl __memset + .globl ___memset .globl __memsetw .globl __constant_c_memset - .globl memset - .ent __memset + .ent ___memset .align 5 -__memset: +___memset: .frame $30,0,$26,0 .prologue 0 @@ -227,7 +228,7 @@ end_b: nop nop ret $31,($26),1 # L0 : - .end __memset + .end ___memset /* * This is the original body of code, prior to replication and @@ -594,4 +595,5 @@ end_w: .end __memsetw -memset = __memset +memset = ___memset +__memset = ___memset diff --git a/arch/alpha/lib/memset.S b/arch/alpha/lib/memset.S index 311b8cfc6914..76ccc6d1f364 100644 --- a/arch/alpha/lib/memset.S +++ b/arch/alpha/lib/memset.S @@ -19,11 +19,13 @@ .text .globl memset .globl __memset + .globl ___memset .globl __memsetw .globl __constant_c_memset - .ent __memset + + .ent ___memset .align 5 -__memset: +___memset: .frame $30,0,$26,0 .prologue 0 @@ -103,7 +105,7 @@ within_one_quad: end: ret $31,($26),1 /* E1 */ - .end __memset + .end ___memset .align 5 .ent __memsetw @@ -121,4 +123,5 @@ __memsetw: .end __memsetw -memset = __memset +memset = ___memset +__memset = ___memset diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi index d9f8249aa66e..3942634f805a 100644 --- a/arch/arc/boot/dts/abilis_tb100.dtsi +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -43,124 +43,124 @@ iomux: iomux@FF10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ - pingrp = "mis0_pins"; + abilis,function = "mis0"; }; pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ - pingrp = "mis1_pins"; + abilis,function = "mis1"; }; pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ - pingrp = "gpioa_pins"; + abilis,function = "gpioa"; }; pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ - pingrp = "mip1_pins"; + abilis,function = "mip1"; }; /* Port 2 */ pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ - pingrp = "mis2_pins"; + abilis,function = "mis2"; }; pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ - pingrp = "mis3_pins"; + abilis,function = "mis3"; }; pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ - pingrp = "gpioc_pins"; + abilis,function = "gpioc"; }; pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ - pingrp = "mip3_pins"; + abilis,function = "mip3"; }; /* Port 3 */ pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ - pingrp = "mis4_pins"; + abilis,function = "mis4"; }; pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ - pingrp = "mis5_pins"; + abilis,function = "mis5"; }; pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ - pingrp = "gpioe_pins"; + abilis,function = "gpioe"; }; pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ - pingrp = "mip5_pins"; + abilis,function = "mip5"; }; /* Port 4 */ pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ - pingrp = "mis6_pins"; + abilis,function = "mis6"; }; pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ - pingrp = "mis7_pins"; + abilis,function = "mis7"; }; pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ - pingrp = "gpiog_pins"; + abilis,function = "gpiog"; }; pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ - pingrp = "mip7_pins"; + abilis,function = "mip7"; }; /* Port 5 */ pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ - pingrp = "gpioj_pins"; + abilis,function = "gpioj"; }; pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ - pingrp = "gpiok_pins"; + abilis,function = "gpiok"; }; pctl_ciplus: pctl-ciplus { /* CI+ interface */ - pingrp = "ciplus_pins"; + abilis,function = "ciplus"; }; pctl_mcard: pctl-mcard { /* M-Card interface */ - pingrp = "mcard_pins"; + abilis,function = "mcard"; }; /* Port 6 */ pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ - pingrp = "mop_pins"; + abilis,function = "mop"; }; pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ - pingrp = "mos0_pins"; + abilis,function = "mos0"; }; pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ - pingrp = "mos1_pins"; + abilis,function = "mos1"; }; pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ - pingrp = "mos2_pins"; + abilis,function = "mos2"; }; pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ - pingrp = "mos3_pins"; + abilis,function = "mos3"; }; /* Port 7 */ pctl_uart0: pctl-uart0 { /* UART 0 */ - pingrp = "uart0_pins"; + abilis,function = "uart0"; }; pctl_uart1: pctl-uart1 { /* UART 1 */ - pingrp = "uart1_pins"; + abilis,function = "uart1"; }; pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ - pingrp = "gpiol_pins"; + abilis,function = "gpiol"; }; pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ - pingrp = "gpiom_pins"; + abilis,function = "gpiom"; }; /* Port 8 */ pctl_spi3: pctl-spi3 { - pingrp = "spi3_pins"; + abilis,function = "spi3"; }; /* Port 9 */ pctl_spi1: pctl-spi1 { - pingrp = "spi1_pins"; + abilis,function = "spi1"; }; pctl_gpio_n: pctl-gpio-n { - pingrp = "gpion_pins"; + abilis,function = "gpion"; }; /* Unmuxed GPIOs */ pctl_gpio_b: pctl-gpio-b { - pingrp = "gpiob_pins"; + abilis,function = "gpiob"; }; pctl_gpio_d: pctl-gpio-d { - pingrp = "gpiod_pins"; + abilis,function = "gpiod"; }; pctl_gpio_f: pctl-gpio-f { - pingrp = "gpiof_pins"; + abilis,function = "gpiof"; }; pctl_gpio_h: pctl-gpio-h { - pingrp = "gpioh_pins"; + abilis,function = "gpioh"; }; pctl_gpio_i: pctl-gpio-i { - pingrp = "gpioi_pins"; + abilis,function = "gpioi"; }; }; @@ -172,9 +172,10 @@ interrupts = <27 2>; reg = <0xFF140000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <0>; - gpio-pins = <&pctl_gpio_a>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioa"; }; gpiob: gpio@FF141000 { compatible = "abilis,tb10x-gpio"; @@ -184,9 +185,10 @@ interrupts = <27 2>; reg = <0xFF141000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <3>; - gpio-pins = <&pctl_gpio_b>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiob"; }; gpioc: gpio@FF142000 { compatible = "abilis,tb10x-gpio"; @@ -196,9 +198,10 @@ interrupts = <27 2>; reg = <0xFF142000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <5>; - gpio-pins = <&pctl_gpio_c>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioc"; }; gpiod: gpio@FF143000 { compatible = "abilis,tb10x-gpio"; @@ -208,9 +211,10 @@ interrupts = <27 2>; reg = <0xFF143000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <8>; - gpio-pins = <&pctl_gpio_d>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiod"; }; gpioe: gpio@FF144000 { compatible = "abilis,tb10x-gpio"; @@ -220,9 +224,10 @@ interrupts = <27 2>; reg = <0xFF144000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <10>; - gpio-pins = <&pctl_gpio_e>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioe"; }; gpiof: gpio@FF145000 { compatible = "abilis,tb10x-gpio"; @@ -232,9 +237,10 @@ interrupts = <27 2>; reg = <0xFF145000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <13>; - gpio-pins = <&pctl_gpio_f>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiof"; }; gpiog: gpio@FF146000 { compatible = "abilis,tb10x-gpio"; @@ -244,9 +250,10 @@ interrupts = <27 2>; reg = <0xFF146000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <15>; - gpio-pins = <&pctl_gpio_g>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiog"; }; gpioh: gpio@FF147000 { compatible = "abilis,tb10x-gpio"; @@ -256,9 +263,10 @@ interrupts = <27 2>; reg = <0xFF147000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <18>; - gpio-pins = <&pctl_gpio_h>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioh"; }; gpioi: gpio@FF148000 { compatible = "abilis,tb10x-gpio"; @@ -268,9 +276,10 @@ interrupts = <27 2>; reg = <0xFF148000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <20>; - gpio-pins = <&pctl_gpio_i>; + #gpio-cells = <2>; + abilis,ngpio = <12>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioi"; }; gpioj: gpio@FF149000 { compatible = "abilis,tb10x-gpio"; @@ -280,9 +289,10 @@ interrupts = <27 2>; reg = <0xFF149000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <32>; - gpio-pins = <&pctl_gpio_j>; + #gpio-cells = <2>; + abilis,ngpio = <32>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioj"; }; gpiok: gpio@FF14a000 { compatible = "abilis,tb10x-gpio"; @@ -292,9 +302,10 @@ interrupts = <27 2>; reg = <0xFF14A000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <64>; - gpio-pins = <&pctl_gpio_k>; + #gpio-cells = <2>; + abilis,ngpio = <22>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiok"; }; gpiol: gpio@FF14b000 { compatible = "abilis,tb10x-gpio"; @@ -304,9 +315,10 @@ interrupts = <27 2>; reg = <0xFF14B000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <86>; - gpio-pins = <&pctl_gpio_l>; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiol"; }; gpiom: gpio@FF14c000 { compatible = "abilis,tb10x-gpio"; @@ -316,9 +328,10 @@ interrupts = <27 2>; reg = <0xFF14C000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <90>; - gpio-pins = <&pctl_gpio_m>; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiom"; }; gpion: gpio@FF14d000 { compatible = "abilis,tb10x-gpio"; @@ -328,9 +341,10 @@ interrupts = <27 2>; reg = <0xFF14D000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <94>; - gpio-pins = <&pctl_gpio_n>; + #gpio-cells = <2>; + abilis,ngpio = <5>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpion"; }; }; }; diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts index ebc313a9f5b2..3dd6ed941464 100644 --- a/arch/arc/boot/dts/abilis_tb100_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -64,62 +64,62 @@ compatible = "gpio-leds"; power { label = "Power"; - gpios = <&gpioi 0>; + gpios = <&gpioi 0 0>; linux,default-trigger = "default-on"; }; heartbeat { label = "Heartbeat"; - gpios = <&gpioi 1>; + gpios = <&gpioi 1 0>; linux,default-trigger = "heartbeat"; }; led2 { label = "LED2"; - gpios = <&gpioi 2>; + gpios = <&gpioi 2 0>; default-state = "off"; }; led3 { label = "LED3"; - gpios = <&gpioi 3>; + gpios = <&gpioi 3 0>; default-state = "off"; }; led4 { label = "LED4"; - gpios = <&gpioi 4>; + gpios = <&gpioi 4 0>; default-state = "off"; }; led5 { label = "LED5"; - gpios = <&gpioi 5>; + gpios = <&gpioi 5 0>; default-state = "off"; }; led6 { label = "LED6"; - gpios = <&gpioi 6>; + gpios = <&gpioi 6 0>; default-state = "off"; }; led7 { label = "LED7"; - gpios = <&gpioi 7>; + gpios = <&gpioi 7 0>; default-state = "off"; }; led8 { label = "LED8"; - gpios = <&gpioi 8>; + gpios = <&gpioi 8 0>; default-state = "off"; }; led9 { label = "LED9"; - gpios = <&gpioi 9>; + gpios = <&gpioi 9 0>; default-state = "off"; }; led10 { label = "LED10"; - gpios = <&gpioi 10>; + gpios = <&gpioi 10 0>; default-state = "off"; }; led11 { label = "LED11"; - gpios = <&gpioi 11>; + gpios = <&gpioi 11 0>; default-state = "off"; }; }; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi index da8ca7941e67..b0467229a5c4 100644 --- a/arch/arc/boot/dts/abilis_tb101.dtsi +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -43,133 +43,133 @@ iomux: iomux@FF10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ - pingrp = "mis0_pins"; + abilis,function = "mis0"; }; pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ - pingrp = "mis1_pins"; + abilis,function = "mis1"; }; pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ - pingrp = "gpioa_pins"; + abilis,function = "gpioa"; }; pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ - pingrp = "mip1_pins"; + abilis,function = "mip1"; }; /* Port 2 */ pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ - pingrp = "mis2_pins"; + abilis,function = "mis2"; }; pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ - pingrp = "mis3_pins"; + abilis,function = "mis3"; }; pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ - pingrp = "gpioc_pins"; + abilis,function = "gpioc"; }; pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ - pingrp = "mip3_pins"; + abilis,function = "mip3"; }; /* Port 3 */ pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ - pingrp = "mis4_pins"; + abilis,function = "mis4"; }; pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ - pingrp = "mis5_pins"; + abilis,function = "mis5"; }; pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ - pingrp = "gpioe_pins"; + abilis,function = "gpioe"; }; pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ - pingrp = "mip5_pins"; + abilis,function = "mip5"; }; /* Port 4 */ pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ - pingrp = "mis6_pins"; + abilis,function = "mis6"; }; pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ - pingrp = "mis7_pins"; + abilis,function = "mis7"; }; pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ - pingrp = "gpiog_pins"; + abilis,function = "gpiog"; }; pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ - pingrp = "mip7_pins"; + abilis,function = "mip7"; }; /* Port 5 */ pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ - pingrp = "gpioj_pins"; + abilis,function = "gpioj"; }; pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ - pingrp = "gpiok_pins"; + abilis,function = "gpiok"; }; pctl_ciplus: pctl-ciplus { /* CI+ interface */ - pingrp = "ciplus_pins"; + abilis,function = "ciplus"; }; pctl_mcard: pctl-mcard { /* M-Card interface */ - pingrp = "mcard_pins"; + abilis,function = "mcard"; }; pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */ - pingrp = "stc0_pins"; + abilis,function = "stc0"; }; pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */ - pingrp = "stc1_pins"; + abilis,function = "stc1"; }; /* Port 6 */ pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ - pingrp = "mop_pins"; + abilis,function = "mop"; }; pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ - pingrp = "mos0_pins"; + abilis,function = "mos0"; }; pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ - pingrp = "mos1_pins"; + abilis,function = "mos1"; }; pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ - pingrp = "mos2_pins"; + abilis,function = "mos2"; }; pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ - pingrp = "mos3_pins"; + abilis,function = "mos3"; }; /* Port 7 */ pctl_uart0: pctl-uart0 { /* UART 0 */ - pingrp = "uart0_pins"; + abilis,function = "uart0"; }; pctl_uart1: pctl-uart1 { /* UART 1 */ - pingrp = "uart1_pins"; + abilis,function = "uart1"; }; pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ - pingrp = "gpiol_pins"; + abilis,function = "gpiol"; }; pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ - pingrp = "gpiom_pins"; + abilis,function = "gpiom"; }; /* Port 8 */ pctl_spi3: pctl-spi3 { - pingrp = "spi3_pins"; + abilis,function = "spi3"; }; pctl_jtag: pctl-jtag { - pingrp = "jtag_pins"; + abilis,function = "jtag"; }; /* Port 9 */ pctl_spi1: pctl-spi1 { - pingrp = "spi1_pins"; + abilis,function = "spi1"; }; pctl_gpio_n: pctl-gpio-n { - pingrp = "gpion_pins"; + abilis,function = "gpion"; }; /* Unmuxed GPIOs */ pctl_gpio_b: pctl-gpio-b { - pingrp = "gpiob_pins"; + abilis,function = "gpiob"; }; pctl_gpio_d: pctl-gpio-d { - pingrp = "gpiod_pins"; + abilis,function = "gpiod"; }; pctl_gpio_f: pctl-gpio-f { - pingrp = "gpiof_pins"; + abilis,function = "gpiof"; }; pctl_gpio_h: pctl-gpio-h { - pingrp = "gpioh_pins"; + abilis,function = "gpioh"; }; pctl_gpio_i: pctl-gpio-i { - pingrp = "gpioi_pins"; + abilis,function = "gpioi"; }; }; @@ -181,9 +181,10 @@ interrupts = <27 2>; reg = <0xFF140000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <0>; - gpio-pins = <&pctl_gpio_a>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioa"; }; gpiob: gpio@FF141000 { compatible = "abilis,tb10x-gpio"; @@ -193,9 +194,10 @@ interrupts = <27 2>; reg = <0xFF141000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <3>; - gpio-pins = <&pctl_gpio_b>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiob"; }; gpioc: gpio@FF142000 { compatible = "abilis,tb10x-gpio"; @@ -205,9 +207,10 @@ interrupts = <27 2>; reg = <0xFF142000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <5>; - gpio-pins = <&pctl_gpio_c>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioc"; }; gpiod: gpio@FF143000 { compatible = "abilis,tb10x-gpio"; @@ -217,9 +220,10 @@ interrupts = <27 2>; reg = <0xFF143000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <8>; - gpio-pins = <&pctl_gpio_d>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiod"; }; gpioe: gpio@FF144000 { compatible = "abilis,tb10x-gpio"; @@ -229,9 +233,10 @@ interrupts = <27 2>; reg = <0xFF144000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <10>; - gpio-pins = <&pctl_gpio_e>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioe"; }; gpiof: gpio@FF145000 { compatible = "abilis,tb10x-gpio"; @@ -241,9 +246,10 @@ interrupts = <27 2>; reg = <0xFF145000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <13>; - gpio-pins = <&pctl_gpio_f>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiof"; }; gpiog: gpio@FF146000 { compatible = "abilis,tb10x-gpio"; @@ -253,9 +259,10 @@ interrupts = <27 2>; reg = <0xFF146000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <15>; - gpio-pins = <&pctl_gpio_g>; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiog"; }; gpioh: gpio@FF147000 { compatible = "abilis,tb10x-gpio"; @@ -265,9 +272,10 @@ interrupts = <27 2>; reg = <0xFF147000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <18>; - gpio-pins = <&pctl_gpio_h>; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioh"; }; gpioi: gpio@FF148000 { compatible = "abilis,tb10x-gpio"; @@ -277,9 +285,10 @@ interrupts = <27 2>; reg = <0xFF148000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <20>; - gpio-pins = <&pctl_gpio_i>; + #gpio-cells = <2>; + abilis,ngpio = <12>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioi"; }; gpioj: gpio@FF149000 { compatible = "abilis,tb10x-gpio"; @@ -289,9 +298,10 @@ interrupts = <27 2>; reg = <0xFF149000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <32>; - gpio-pins = <&pctl_gpio_j>; + #gpio-cells = <2>; + abilis,ngpio = <32>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioj"; }; gpiok: gpio@FF14a000 { compatible = "abilis,tb10x-gpio"; @@ -301,9 +311,10 @@ interrupts = <27 2>; reg = <0xFF14A000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <64>; - gpio-pins = <&pctl_gpio_k>; + #gpio-cells = <2>; + abilis,ngpio = <22>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiok"; }; gpiol: gpio@FF14b000 { compatible = "abilis,tb10x-gpio"; @@ -313,9 +324,10 @@ interrupts = <27 2>; reg = <0xFF14B000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <86>; - gpio-pins = <&pctl_gpio_l>; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiol"; }; gpiom: gpio@FF14c000 { compatible = "abilis,tb10x-gpio"; @@ -325,9 +337,10 @@ interrupts = <27 2>; reg = <0xFF14C000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <90>; - gpio-pins = <&pctl_gpio_m>; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiom"; }; gpion: gpio@FF14d000 { compatible = "abilis,tb10x-gpio"; @@ -337,9 +350,10 @@ interrupts = <27 2>; reg = <0xFF14D000 0x1000>; gpio-controller; - #gpio-cells = <1>; - gpio-base = <94>; - gpio-pins = <&pctl_gpio_n>; + #gpio-cells = <2>; + abilis,ngpio = <5>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpion"; }; }; }; diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts index b204657993aa..1cf51c280f28 100644 --- a/arch/arc/boot/dts/abilis_tb101_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -64,62 +64,62 @@ compatible = "gpio-leds"; power { label = "Power"; - gpios = <&gpioi 0>; + gpios = <&gpioi 0 0>; linux,default-trigger = "default-on"; }; heartbeat { label = "Heartbeat"; - gpios = <&gpioi 1>; + gpios = <&gpioi 1 0>; linux,default-trigger = "heartbeat"; }; led2 { label = "LED2"; - gpios = <&gpioi 2>; + gpios = <&gpioi 2 0>; default-state = "off"; }; led3 { label = "LED3"; - gpios = <&gpioi 3>; + gpios = <&gpioi 3 0>; default-state = "off"; }; led4 { label = "LED4"; - gpios = <&gpioi 4>; + gpios = <&gpioi 4 0>; default-state = "off"; }; led5 { label = "LED5"; - gpios = <&gpioi 5>; + gpios = <&gpioi 5 0>; default-state = "off"; }; led6 { label = "LED6"; - gpios = <&gpioi 6>; + gpios = <&gpioi 6 0>; default-state = "off"; }; led7 { label = "LED7"; - gpios = <&gpioi 7>; + gpios = <&gpioi 7 0>; default-state = "off"; }; led8 { label = "LED8"; - gpios = <&gpioi 8>; + gpios = <&gpioi 8 0>; default-state = "off"; }; led9 { label = "LED9"; - gpios = <&gpioi 9>; + gpios = <&gpioi 9 0>; default-state = "off"; }; led10 { label = "LED10"; - gpios = <&gpioi 10>; + gpios = <&gpioi 10 0>; default-state = "off"; }; led11 { label = "LED11"; - gpios = <&gpioi 11>; + gpios = <&gpioi 11 0>; default-state = "off"; }; }; diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi index edf56f4749e1..a098d7c05e96 100644 --- a/arch/arc/boot/dts/abilis_tb10x.dtsi +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -62,9 +62,8 @@ }; iomux: iomux@FF10601c { - #address-cells = <1>; - #size-cells = <1>; compatible = "abilis,tb10x-iomux"; + #gpio-range-cells = <3>; reg = <0xFF10601c 0x4>; }; diff --git a/arch/arc/boot/dts/angel4.dts b/arch/arc/boot/dts/angel4.dts index 4fb2d6f655bd..bcf662d21a57 100644 --- a/arch/arc/boot/dts/angel4.dts +++ b/arch/arc/boot/dts/angel4.dts @@ -67,5 +67,9 @@ reg = <1>; }; }; + + arcpmu0: pmu { + compatible = "snps,arc700-pmu"; + }; }; }; diff --git a/arch/arc/configs/fpga_noramfs_defconfig b/arch/arc/configs/fpga_noramfs_defconfig new file mode 100644 index 000000000000..5276a52f6a2f --- /dev/null +++ b/arch/arc/configs/fpga_noramfs_defconfig @@ -0,0 +1,64 @@ +CONFIG_CROSS_COMPILE="arc-linux-uclibc-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="ARCLinux" +# CONFIG_SWAP is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARC_PLAT_FPGA_LEGACY=y +CONFIG_ARC_BOARD_ML509=y +# CONFIG_ARC_HAS_RTSC is not set +CONFIG_ARC_BUILTIN_DTB_NAME="angel4" +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +CONFIG_ARC_EMAC=y +CONFIG_LXT_PHY=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_ARC=y +CONFIG_SERIAL_ARC_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_XZ_DEC=y diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h index 115ad96480e6..cbf755e32a03 100644 --- a/arch/arc/include/asm/perf_event.h +++ b/arch/arc/include/asm/perf_event.h @@ -1,5 +1,7 @@ /* - * Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com) + * Linux performance counter support for ARC + * + * Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -10,4 +12,204 @@ #ifndef __ASM_PERF_EVENT_H #define __ASM_PERF_EVENT_H +/* real maximum varies per CPU, this is the maximum supported by the driver */ +#define ARC_PMU_MAX_HWEVENTS 64 + +#define ARC_REG_CC_BUILD 0xF6 +#define ARC_REG_CC_INDEX 0x240 +#define ARC_REG_CC_NAME0 0x241 +#define ARC_REG_CC_NAME1 0x242 + +#define ARC_REG_PCT_BUILD 0xF5 +#define ARC_REG_PCT_COUNTL 0x250 +#define ARC_REG_PCT_COUNTH 0x251 +#define ARC_REG_PCT_SNAPL 0x252 +#define ARC_REG_PCT_SNAPH 0x253 +#define ARC_REG_PCT_CONFIG 0x254 +#define ARC_REG_PCT_CONTROL 0x255 +#define ARC_REG_PCT_INDEX 0x256 + +#define ARC_REG_PCT_CONTROL_CC (1 << 16) /* clear counts */ +#define ARC_REG_PCT_CONTROL_SN (1 << 17) /* snapshot */ + +struct arc_reg_pct_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int m:8, c:8, r:6, s:2, v:8; +#else + unsigned int v:8, s:2, r:6, c:8, m:8; +#endif +}; + +struct arc_reg_cc_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int c:16, r:8, v:8; +#else + unsigned int v:8, r:8, c:16; +#endif +}; + +#define PERF_COUNT_ARC_DCLM (PERF_COUNT_HW_MAX + 0) +#define PERF_COUNT_ARC_DCSM (PERF_COUNT_HW_MAX + 1) +#define PERF_COUNT_ARC_ICM (PERF_COUNT_HW_MAX + 2) +#define PERF_COUNT_ARC_BPOK (PERF_COUNT_HW_MAX + 3) +#define PERF_COUNT_ARC_EDTLB (PERF_COUNT_HW_MAX + 4) +#define PERF_COUNT_ARC_EITLB (PERF_COUNT_HW_MAX + 5) +#define PERF_COUNT_ARC_HW_MAX (PERF_COUNT_HW_MAX + 6) + +/* + * The "generalized" performance events seem to really be a copy + * of the available events on x86 processors; the mapping to ARC + * events is not always possible 1-to-1. Fortunately, there doesn't + * seem to be an exact definition for these events, so we can cheat + * a bit where necessary. + * + * In particular, the following PERF events may behave a bit differently + * compared to other architectures: + * + * PERF_COUNT_HW_CPU_CYCLES + * Cycles not in halted state + * + * PERF_COUNT_HW_REF_CPU_CYCLES + * Reference cycles not in halted state, same as PERF_COUNT_HW_CPU_CYCLES + * for now as we don't do Dynamic Voltage/Frequency Scaling (yet) + * + * PERF_COUNT_HW_BUS_CYCLES + * Unclear what this means, Intel uses 0x013c, which according to + * their datasheet means "unhalted reference cycles". It sounds similar + * to PERF_COUNT_HW_REF_CPU_CYCLES, and we use the same counter for it. + * + * PERF_COUNT_HW_STALLED_CYCLES_BACKEND + * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND + * The ARC 700 can either measure stalls per pipeline stage, or all stalls + * combined; for now we assign all stalls to STALLED_CYCLES_BACKEND + * and all pipeline flushes (e.g. caused by mispredicts, etc.) to + * STALLED_CYCLES_FRONTEND. + * + * We could start multiple performance counters and combine everything + * afterwards, but that makes it complicated. + * + * Note that I$ cache misses aren't counted by either of the two! + */ + +static const char * const arc_pmu_ev_hw_map[] = { + [PERF_COUNT_HW_CPU_CYCLES] = "crun", + [PERF_COUNT_HW_REF_CPU_CYCLES] = "crun", + [PERF_COUNT_HW_BUS_CYCLES] = "crun", + [PERF_COUNT_HW_INSTRUCTIONS] = "iall", + [PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush", + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall", + [PERF_COUNT_ARC_DCLM] = "dclm", + [PERF_COUNT_ARC_DCSM] = "dcsm", + [PERF_COUNT_ARC_ICM] = "icm", + [PERF_COUNT_ARC_BPOK] = "bpok", + [PERF_COUNT_ARC_EDTLB] = "edtlb", + [PERF_COUNT_ARC_EITLB] = "eitlb", +}; + +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xffff + +static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = PERF_COUNT_ARC_DCLM, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = PERF_COUNT_ARC_DCSM, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = PERF_COUNT_ARC_ICM, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = PERF_COUNT_ARC_EDTLB, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = PERF_COUNT_ARC_EITLB, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS, + [C(RESULT_MISS)] = PERF_COUNT_HW_BRANCH_MISSES, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + #endif /* __ASM_PERF_EVENT_H */ diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h index 2d50a4cdd7f3..45be21672011 100644 --- a/arch/arc/include/asm/thread_info.h +++ b/arch/arc/include/asm/thread_info.h @@ -80,8 +80,6 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void) #endif /* !__ASSEMBLY__ */ -#define PREEMPT_ACTIVE 0x10000000 - /* * thread information flags * - these are process state flags that various assembly files may need to diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile index c242ef07ba70..8004b4fa6461 100644 --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_ARC_MISALIGN_ACCESS) += unaligned.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o +obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o CFLAGS_fpu.o += -mdpfp diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c new file mode 100644 index 000000000000..e46d81f70979 --- /dev/null +++ b/arch/arc/kernel/perf_event.c @@ -0,0 +1,326 @@ +/* + * Linux performance counter support for ARC700 series + * + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This code is inspired by the perf support of various other architectures. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include + +struct arc_pmu { + struct pmu pmu; + int counter_size; /* in bits */ + int n_counters; + unsigned long used_mask[BITS_TO_LONGS(ARC_PMU_MAX_HWEVENTS)]; + int ev_hw_idx[PERF_COUNT_ARC_HW_MAX]; +}; + +/* read counter #idx; note that counter# != event# on ARC! */ +static uint64_t arc_pmu_read_counter(int idx) +{ + uint32_t tmp; + uint64_t result; + + /* + * ARC supports making 'snapshots' of the counters, so we don't + * need to care about counters wrapping to 0 underneath our feet + */ + write_aux_reg(ARC_REG_PCT_INDEX, idx); + tmp = read_aux_reg(ARC_REG_PCT_CONTROL); + write_aux_reg(ARC_REG_PCT_CONTROL, tmp | ARC_REG_PCT_CONTROL_SN); + result = (uint64_t) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32; + result |= read_aux_reg(ARC_REG_PCT_SNAPL); + + return result; +} + +static void arc_perf_event_update(struct perf_event *event, + struct hw_perf_event *hwc, int idx) +{ + struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); + uint64_t prev_raw_count, new_raw_count; + int64_t delta; + + do { + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = arc_pmu_read_counter(idx); + } while (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count); + + delta = (new_raw_count - prev_raw_count) & + ((1ULL << arc_pmu->counter_size) - 1ULL); + + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); +} + +static void arc_pmu_read(struct perf_event *event) +{ + arc_perf_event_update(event, &event->hw, event->hw.idx); +} + +static int arc_pmu_cache_event(u64 config) +{ + unsigned int cache_type, cache_op, cache_result; + int ret; + + cache_type = (config >> 0) & 0xff; + cache_op = (config >> 8) & 0xff; + cache_result = (config >> 16) & 0xff; + if (cache_type >= PERF_COUNT_HW_CACHE_MAX) + return -EINVAL; + if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX) + return -EINVAL; + if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ret = arc_pmu_cache_map[cache_type][cache_op][cache_result]; + + if (ret == CACHE_OP_UNSUPPORTED) + return -ENOENT; + + return ret; +} + +/* initializes hw_perf_event structure if event is supported */ +static int arc_pmu_event_init(struct perf_event *event) +{ + struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); + struct hw_perf_event *hwc = &event->hw; + int ret; + + /* ARC 700 PMU does not support sampling events */ + if (is_sampling_event(event)) + return -ENOENT; + + switch (event->attr.type) { + case PERF_TYPE_HARDWARE: + if (event->attr.config >= PERF_COUNT_HW_MAX) + return -ENOENT; + if (arc_pmu->ev_hw_idx[event->attr.config] < 0) + return -ENOENT; + hwc->config = arc_pmu->ev_hw_idx[event->attr.config]; + pr_debug("initializing event %d with cfg %d\n", + (int) event->attr.config, (int) hwc->config); + return 0; + case PERF_TYPE_HW_CACHE: + ret = arc_pmu_cache_event(event->attr.config); + if (ret < 0) + return ret; + hwc->config = arc_pmu->ev_hw_idx[ret]; + return 0; + default: + return -ENOENT; + } +} + +/* starts all counters */ +static void arc_pmu_enable(struct pmu *pmu) +{ + uint32_t tmp; + tmp = read_aux_reg(ARC_REG_PCT_CONTROL); + write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x1); +} + +/* stops all counters */ +static void arc_pmu_disable(struct pmu *pmu) +{ + uint32_t tmp; + tmp = read_aux_reg(ARC_REG_PCT_CONTROL); + write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0); +} + +/* + * Assigns hardware counter to hardware condition. + * Note that there is no separate start/stop mechanism; + * stopping is achieved by assigning the 'never' condition + */ +static void arc_pmu_start(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (WARN_ON_ONCE(idx == -1)) + return; + + if (flags & PERF_EF_RELOAD) + WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE)); + + event->hw.state = 0; + + /* enable ARC pmu here */ + write_aux_reg(ARC_REG_PCT_INDEX, idx); + write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config); +} + +static void arc_pmu_stop(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (!(event->hw.state & PERF_HES_STOPPED)) { + /* stop ARC pmu here */ + write_aux_reg(ARC_REG_PCT_INDEX, idx); + + /* condition code #0 is always "never" */ + write_aux_reg(ARC_REG_PCT_CONFIG, 0); + + event->hw.state |= PERF_HES_STOPPED; + } + + if ((flags & PERF_EF_UPDATE) && + !(event->hw.state & PERF_HES_UPTODATE)) { + arc_perf_event_update(event, &event->hw, idx); + event->hw.state |= PERF_HES_UPTODATE; + } +} + +static void arc_pmu_del(struct perf_event *event, int flags) +{ + struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); + + arc_pmu_stop(event, PERF_EF_UPDATE); + __clear_bit(event->hw.idx, arc_pmu->used_mask); + + perf_event_update_userpage(event); +} + +/* allocate hardware counter and optionally start counting */ +static int arc_pmu_add(struct perf_event *event, int flags) +{ + struct arc_pmu *arc_pmu = container_of(event->pmu, struct arc_pmu, pmu); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (__test_and_set_bit(idx, arc_pmu->used_mask)) { + idx = find_first_zero_bit(arc_pmu->used_mask, + arc_pmu->n_counters); + if (idx == arc_pmu->n_counters) + return -EAGAIN; + + __set_bit(idx, arc_pmu->used_mask); + hwc->idx = idx; + } + + write_aux_reg(ARC_REG_PCT_INDEX, idx); + write_aux_reg(ARC_REG_PCT_CONFIG, 0); + write_aux_reg(ARC_REG_PCT_COUNTL, 0); + write_aux_reg(ARC_REG_PCT_COUNTH, 0); + local64_set(&hwc->prev_count, 0); + + hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED; + if (flags & PERF_EF_START) + arc_pmu_start(event, PERF_EF_RELOAD); + + perf_event_update_userpage(event); + + return 0; +} + +static int arc_pmu_device_probe(struct platform_device *pdev) +{ + struct arc_pmu *arc_pmu; + struct arc_reg_pct_build pct_bcr; + struct arc_reg_cc_build cc_bcr; + int i, j, ret; + + union cc_name { + struct { + uint32_t word0, word1; + char sentinel; + } indiv; + char str[9]; + } cc_name; + + + READ_BCR(ARC_REG_PCT_BUILD, pct_bcr); + if (!pct_bcr.v) { + pr_err("This core does not have performance counters!\n"); + return -ENODEV; + } + + arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), + GFP_KERNEL); + if (!arc_pmu) + return -ENOMEM; + + arc_pmu->n_counters = pct_bcr.c; + BUG_ON(arc_pmu->n_counters > ARC_PMU_MAX_HWEVENTS); + + arc_pmu->counter_size = 32 + (pct_bcr.s << 4); + pr_info("ARC PMU found with %d counters of size %d bits\n", + arc_pmu->n_counters, arc_pmu->counter_size); + + READ_BCR(ARC_REG_CC_BUILD, cc_bcr); + + if (!cc_bcr.v) + pr_err("Strange! Performance counters exist, but no countable conditions?\n"); + + pr_info("ARC PMU has %d countable conditions\n", cc_bcr.c); + + cc_name.str[8] = 0; + for (i = 0; i < PERF_COUNT_HW_MAX; i++) + arc_pmu->ev_hw_idx[i] = -1; + + for (j = 0; j < cc_bcr.c; j++) { + write_aux_reg(ARC_REG_CC_INDEX, j); + cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0); + cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1); + for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) { + if (arc_pmu_ev_hw_map[i] && + !strcmp(arc_pmu_ev_hw_map[i], cc_name.str) && + strlen(arc_pmu_ev_hw_map[i])) { + pr_debug("mapping %d to idx %d with name %s\n", + i, j, cc_name.str); + arc_pmu->ev_hw_idx[i] = j; + } + } + } + + arc_pmu->pmu = (struct pmu) { + .pmu_enable = arc_pmu_enable, + .pmu_disable = arc_pmu_disable, + .event_init = arc_pmu_event_init, + .add = arc_pmu_add, + .del = arc_pmu_del, + .start = arc_pmu_start, + .stop = arc_pmu_stop, + .read = arc_pmu_read, + }; + + ret = perf_pmu_register(&arc_pmu->pmu, pdev->name, PERF_TYPE_RAW); + + return ret; +} + +#ifdef CONFIG_OF +static const struct of_device_id arc_pmu_match[] = { + { .compatible = "snps,arc700-pmu" }, + {}, +}; +MODULE_DEVICE_TABLE(of, arc_pmu_match); +#endif + +static struct platform_driver arc_pmu_driver = { + .driver = { + .name = "arc700-pmu", + .of_match_table = of_match_ptr(arc_pmu_match), + }, + .probe = arc_pmu_device_probe, +}; + +module_platform_driver(arc_pmu_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mischa Jonker "); +MODULE_DESCRIPTION("ARC PMU driver"); diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig index 1ab386bb5da8..6994c188dc88 100644 --- a/arch/arc/plat-tb10x/Kconfig +++ b/arch/arc/plat-tb10x/Kconfig @@ -20,8 +20,10 @@ menuconfig ARC_PLAT_TB10X bool "Abilis TB10x" select COMMON_CLK select PINCTRL + select PINCTRL_TB10X select PINMUX select ARCH_REQUIRE_GPIOLIB + select GPIO_TB10X select TB10X_IRQC help Support for platforms based on the TB10x home media gateway SOC by diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 214b698cefea..c1f1a7eee953 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -25,7 +25,7 @@ config ARM select HARDIRQS_SW_RESEND select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB - select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT select HAVE_CONTEXT_TRACKING @@ -1496,6 +1496,7 @@ config HAVE_ARM_ARCH_TIMER bool "Architected timer support" depends on CPU_V7 select ARM_ARCH_TIMER + select GENERIC_CLOCKEVENTS help This option enables support for the ARM architected timer @@ -1719,7 +1720,6 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" depends on AEABI && !THUMB2_KERNEL - default y help This option preserves the old syscall interface along with the new (ARM EABI) one. It also provides a compatibility layer to @@ -1727,11 +1727,16 @@ config OABI_COMPAT in memory differs between the legacy ABI and the new ARM EABI (only for non "thumb" binaries). This option adds a tiny overhead to all syscalls and produces a slightly larger kernel. + + The seccomp filter system will not be available when this is + selected, since there is no way yet to sensibly distinguish + between calling conventions during filtering. + If you know you'll be using only pure EABI user space then you can say N here. If this option is not selected and you attempt to execute a legacy ABI binary then the result will be UNPREDICTABLE (in fact it can be predicted that it won't work - at all). If in doubt say Y. + at all). If in doubt say N. config ARCH_HAS_HOLES_MEMORYMODEL bool diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index b4f95c2bbf74..72a9b3fc4251 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -13,4 +13,83 @@ / { model = "IGEP COM AM335x on AQUILA Expansion"; compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + status = "okay"; + }; + + leds_base { + pinctrl-names = "default"; + pinctrl-0 = <&leds_base_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "base:red:user"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ + default-state = "off"; + }; + + led@1 { + label = "base:green:user"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + >; + }; + + leds_base_pins: pinmux_leds_base_pins { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 619624479311..7063311a58d9 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -199,6 +199,35 @@ pinctrl-0 = <&uart0_pins>; }; +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index e99dfaf70052..03fcbf0a88a8 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "am3517.dtsi" / { - model = "TI AM3517 EVM (AM3517/05)"; - compatible = "ti,am3517-evm", "ti,omap3"; + model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; + compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi new file mode 100644 index 000000000000..2fbe02faa8b1 --- /dev/null +++ b/arch/arm/boot/dts/am3517.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for am3517 SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + am35x_otg_hs: am35x_otg_hs@5c040000 { + compatible = "ti,omap3-musb"; + ti,hwmods = "am35x_otg_hs"; + status = "disabled"; + reg = <0x5c040000 0x1000>; + interrupts = <71>; + interrupt-names = "mc"; + }; + + davinci_emac: ethernet@0x5c000000 { + compatible = "ti,am3517-emac"; + ti,hwmods = "davinci_emac"; + status = "disabled"; + reg = <0x5c000000 0x30000>; + interrupts = <67 68 69 70>; + ti,davinci-ctrl-reg-offset = <0x10000>; + ti,davinci-ctrl-mod-reg-offset = <0>; + ti,davinci-ctrl-ram-offset = <0x20000>; + ti,davinci-ctrl-ram-size = <0x2000>; + ti,davinci-rmii-en = /bits/ 8 <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + davinci_mdio: ethernet@0x5c030000 { + compatible = "ti,davinci_mdio"; + ti,hwmods = "davinci_mdio"; + status = "disabled"; + reg = <0x5c030000 0x1000>; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart4: serial@4809e000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + status = "disabled"; + reg = <0x4809e000 0x400>; + interrupts = <84>; + dmas = <&sdma 55 &sdma 54>; + dma-names = "tx", "rx"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 90ce29dbe119..08a56bcfc724 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -99,22 +99,22 @@ spi-max-frequency = <50000000>; }; }; + }; - pcie-controller { + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 00d6a798c705..7f10f627ae5b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -118,7 +118,7 @@ coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 3f5e6121c730..98335fb34b7a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,7 +47,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -62,10 +62,10 @@ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -74,8 +74,8 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -145,20 +145,20 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3e9fd1353f89..66609684d41b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,7 +48,7 @@ /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -68,7 +68,9 @@ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -77,10 +79,18 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -106,8 +116,8 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -150,6 +160,74 @@ status = "disabled"; }; + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; @@ -166,23 +244,6 @@ clocks = <&gateclk 26>; status = "disabled"; }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; }; internal-regs { diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 2347e9563cef..6801106fa1f8 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -11,6 +11,10 @@ #include / { + aliases { + serial4 = &usart3; + }; + ahb { apb { pinctrl@fffff400 { diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 1e12aeff403b..aa537ed13f0a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -85,6 +85,8 @@ reg = <0x7e205000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -93,6 +95,8 @@ reg = <0x7e804000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index dc259e8b8a73..9b186ac06c8b 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -27,6 +27,13 @@ i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; i2c@12C60000 { @@ -35,6 +42,11 @@ max77686@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; reg = <0x09>; voltage-regulators { diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 139b40cc3a23..2ccbb57fbfa8 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -85,6 +85,12 @@ <1 10 0xf08>; }; + memory-controller@fff00000 { + compatible = "calxeda,ecx-2000-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; + intc: interrupt-controller@fff11000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index bc22557d7a6a..b90045a8f8e3 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -53,12 +53,6 @@ status = "disabled"; }; - memory-controller@fff00000 { - compatible = "calxeda,hb-ddr-ctrl"; - reg = <0xfff00000 0x1000>; - interrupts = <0 91 4>; - }; - ipc@fff20000 { compatible = "arm,pl320", "arm,primecell"; reg = <0xfff20000 0x1000>; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 6aad34ad9517..ed14aeac0566 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -86,6 +86,12 @@ soc { ranges = <0x00000000 0x00000000 0xffffffff>; + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; + timer@fff10600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xfff10600 0x20>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index f4dcff3a9969..4bcdd3ad15e5 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -190,7 +190,7 @@ usbphy0: usbphy@0 { compatible = "usb-nop-xceiv"; - clocks = <&clks 124>; + clocks = <&clks 75>; clock-names = "main_clk"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 59154dc15fe4..fb28b2ecb1db 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -161,7 +161,7 @@ clocks = <&clks 197>, <&clks 3>, <&clks 197>, <&clks 107>, <&clks 0>, <&clks 118>, - <&clks 62>, <&clks 139>, + <&clks 0>, <&clks 139>, <&clks 0>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index 9c18adf788f7..f577b7df9a29 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -44,8 +44,8 @@ gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index b0ee342598f0..68221fab978d 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -13,7 +13,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - 8250@3,0 { + uart@3,0 { compatible = "ns16550a"; reg = <3 0 0x100>; bank-width = <2>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index a2bfcde858a6..d0c5b37e248c 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -9,6 +9,7 @@ */ #include +#include #include #include "skeleton.dtsi" @@ -21,6 +22,8 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + i2c0 = &i2c1; + i2c1 = &i2c2; }; cpus { @@ -53,6 +56,28 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480a6000 { + compatible = "ti,omap2-aes"; + ti,hwmods = "aes"; + reg = <0x480a6000 0x50>; + dmas = <&sdma 9 &sdma 10>; + dma-names = "tx", "rx"; + }; + + hdq1w: 1w@480b2000 { + compatible = "ti,omap2420-1w"; + ti,hwmods = "hdq1w"; + reg = <0x480b2000 0x1000>; + interrupts = <58>; + }; + + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -63,6 +88,7 @@ sdma: dma-controller@48056000 { compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + ti,hwmods = "dma"; reg = <0x48056000 0x1000>; interrupts = <12>, <13>, @@ -73,21 +99,91 @@ #dma-requests = <64>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48070000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <56>; + dmas = <&sdma 27 &sdma 28>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c2"; + reg = <0x48072000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <57>; + dmas = <&sdma 29 &sdma 30>; + dma-names = "tx", "rx"; + }; + + mcspi1: mcspi@48098000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi1"; + reg = <0x48098000 0x100>; + interrupts = <65>; + dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38 + &sdma 39 &sdma 40 &sdma 41 &sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: mcspi@4809a000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi2"; + reg = <0x4809a000 0x100>; + interrupts = <66>; + dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + rng: rng@480a0000 { + compatible = "ti,omap2-rng"; + ti,hwmods = "rng"; + reg = <0x480a0000 0x50>; + interrupts = <36>; + }; + + sham: sham@480a4000 { + compatible = "ti,omap2-sham"; + ti,hwmods = "sham"; + reg = <0x480a4000 0x64>; + interrupts = <51>; + dmas = <&sdma 13>; + dma-names = "rx"; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; + reg = <0x4806a000 0x2000>; + interrupts = <72>; + dmas = <&sdma 49 &sdma 50>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart2"; + reg = <0x4806c000 0x400>; + interrupts = <73>; + dmas = <&sdma 51 &sdma 52>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart3: serial@4806e000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart3"; + reg = <0x4806e000 0x400>; + interrupts = <74>; + dmas = <&sdma 53 &sdma 54>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index c8f9c55169ea..60c605de22dd 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -114,6 +114,15 @@ dma-names = "tx", "rx"; }; + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; @@ -121,5 +130,19 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + wd_timer2: wdt@48022000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x48022000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2420-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2420-i2c"; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c535a5a2b27f..d624345666f5 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -175,6 +175,25 @@ dma-names = "tx", "rx"; }; + mmc1: mmc@4809c000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x4809c000 0x200>; + interrupts = <83>; + ti,hwmods = "mmc1"; + ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x480b4000 0x200>; + interrupts = <86>; + ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; @@ -182,5 +201,35 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + mcspi3: mcspi@480b8000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi3"; + reg = <0x480b8000 0x100>; + interrupts = <91>; + dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + usb_otg_hs: usb_otg_hs@480ac000 { + compatible = "ti,omap2-musb"; + ti,hwmods = "usb_otg_hs"; + reg = <0x480ac000 0x1000>; + interrupts = <93>; + }; + + wd_timer2: wdt@49016000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x49016000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2430-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2430-i2c"; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 31a632f7effb..df33a50bc070 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -215,3 +215,10 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index fa532aaacc68..3ba4a625ea5b 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,6 +61,14 @@ vcc-supply = <&hsusb2_power>; }; + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + gpio_keys { compatible = "gpio-keys"; @@ -120,6 +128,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -178,3 +192,10 @@ mode = <3>; power = <50>; }; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b7b7e3..165aaf7591ba 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP Technology devices + * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap36xx.dtsi" / { memory { @@ -24,6 +24,25 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + vdd33: regulator-vdd33 { + compatible = "regulator-fixed"; + regulator-name = "vdd33"; + regulator-always-on; + }; + + lbee1usjyc_vmmc: lbee1usjyc_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&lbee1usjyc_pins>; + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + vin-supply = <&vdd33>; + }; }; &omap3_pmx_core { @@ -48,6 +67,15 @@ >; }; + /* WiFi/BT combo */ + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ + 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -65,10 +93,17 @@ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; @@ -78,10 +113,33 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + leds_pins: pinmux_leds_pins { }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -101,9 +159,16 @@ #include "twl4030_omap3.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + &mcbsp2 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; @@ -114,11 +179,15 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&lbee1usjyc_vmmc>; + bus-width = <4>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index d5cc79267250..1c7e74d2d2bc 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 board + * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc911x.dtsi" / { - model = "IGEPv2"; + model = "IGEPv2 (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { @@ -67,6 +67,8 @@ pinctrl-names = "default"; pinctrl-0 = < &hsusbb1_pins + &tfp410_pins + &dss_pins >; hsusbb1_pins: pinmux_hsusbb1_pins { @@ -85,6 +87,45 @@ 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ >; }; + + tfp410_pins: tfp410_dvi_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_pins: pinmux_dss_dvi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; }; &leds_pins { @@ -174,3 +215,8 @@ &usbhsehci { phys = <&hsusb1_phy>; }; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 525e6d9b0978..02a23f8a3384 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM Module + * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM Module"; + model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap3"; leds { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c4f20bfe4cce..6fc85f963530 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap34xx-hs.dtsi" / { model = "Nokia N900"; @@ -125,6 +125,21 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + display_pins: pinmux_display_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ @@ -358,8 +373,14 @@ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; +/* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vaux3>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 94eb77d3b9dd..5c26c184f2c1 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include "omap36xx.dtsi" +#include "omap36xx-hs.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26ed0c2..daabf99d402a 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -82,6 +82,13 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -260,6 +267,13 @@ ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -357,6 +371,13 @@ dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap3-mmu-isp"; + ti,hwmods = "mmu_isp"; + reg = <0x480bd400 0x80>; + interrupts = <8>; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -442,6 +463,27 @@ dma-names = "tx", "rx"; }; + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; + }; + timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi new file mode 100644 index 000000000000..1ff626489546 --- /dev/null +++ b/arch/arm/boot/dts/omap34xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap34xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi new file mode 100644 index 000000000000..2c7febb0e016 --- /dev/null +++ b/arch/arm/boot/dts/omap36xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap36xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 298e85020e1b..88c6a05cab41 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -246,15 +246,6 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; -}; - -&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { - pinctrl-single,pins = < - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; - }; /* * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP @@ -274,7 +265,7 @@ pinctrl-single,pins = < 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ @@ -284,6 +275,15 @@ }; }; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5fc3f43c5a81..dbc81fb6ef03 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -300,12 +300,12 @@ wl12xx_pins: pinmux_wl12xx_pins { pinctrl-single,pins = < 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 6d09b8d42fdd..f936476c2753 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -245,14 +245,14 @@ mpu_periph_clk: mpu_periph_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <4>; }; mpu_l2_ram_clk: mpu_l2_ram_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <2>; }; @@ -266,8 +266,9 @@ l3_main_clk: l3_main_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mainclk>; + fixed-divider = <1>; }; l3_mp_clk: l3_mp_clk { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index c1751a64889a..7f5878c2784a 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -193,7 +193,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>; + interrupts = <0 11 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -212,11 +215,11 @@ timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 1>, - <0 19 1>, - <0 20 1>, - <0 21 1>, - <0 22 1>; + interrupts = <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>; clocks = <&osc24M>; }; @@ -228,7 +231,7 @@ uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 1>; + interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -238,7 +241,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -248,7 +251,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -258,7 +261,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -268,7 +271,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -278,7 +281,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 5 1>; + interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e46cfedde74c..367611a0730b 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -170,7 +170,7 @@ emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-emac"; reg = <0x01c0b000 0x1000>; - interrupts = <0 55 1>; + interrupts = <0 55 4>; clocks = <&ahb_gates 17>; status = "disabled"; }; @@ -186,7 +186,7 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 28 1>; + interrupts = <0 28 4>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; @@ -251,12 +251,12 @@ timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0x90>; - interrupts = <0 22 1>, - <0 23 1>, - <0 24 1>, - <0 25 1>, - <0 67 1>, - <0 68 1>; + interrupts = <0 22 4>, + <0 23 4>, + <0 24 4>, + <0 25 4>, + <0 67 4>, + <0 68 4>; clocks = <&osc24M>; }; @@ -273,7 +273,7 @@ uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; @@ -283,7 +283,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; @@ -293,7 +293,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; @@ -303,7 +303,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; @@ -313,7 +313,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 17 1>; + interrupts = <0 17 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>; @@ -323,7 +323,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 18 1>; + interrupts = <0 18 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>; @@ -333,7 +333,7 @@ uart6: serial@01c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; - interrupts = <0 19 1>; + interrupts = <0 19 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 22>; @@ -343,7 +343,7 @@ uart7: serial@01c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; - interrupts = <0 20 1>; + interrupts = <0 20 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 23>; @@ -353,7 +353,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 7 1>; + interrupts = <0 7 4>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; @@ -362,7 +362,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 8 1>; + interrupts = <0 8 4>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; @@ -371,7 +371,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 9 1>; + interrupts = <0 9 4>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; @@ -380,7 +380,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 88 1>; + interrupts = <0 88 4>; clocks = <&apb1_gates 3>; clock-frequency = <100000>; status = "disabled"; @@ -389,7 +389,7 @@ i2c4: i2c@01c2bc00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2bc00 0x400>; - interrupts = <0 89 1>; + interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; status = "disabled"; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index fb1b2ec8eaa9..4217096ee677 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -19,6 +19,12 @@ interrupts = <11>; }; + charger: bci { + compatible = "ti,twl4030-bci"; + interrupts = <9>, <2>; + bci3v1-supply = <&vusb3v1>; + }; + watchdog { compatible = "ti,twl4030-wdt"; }; diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 8e1a0245907f..41bca32409fc 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -404,7 +404,7 @@ static irqreturn_t dma_irq_handler(int irq, void *data) BIT(slot)); if (edma_cc[ctlr]->intr_data[channel].callback) edma_cc[ctlr]->intr_data[channel].callback( - channel, DMA_COMPLETE, + channel, EDMA_DMA_COMPLETE, edma_cc[ctlr]->intr_data[channel].data); } } while (sh_ipr); @@ -459,7 +459,7 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data) callback) { edma_cc[ctlr]->intr_data[k]. callback(k, - DMA_CC_ERROR, + EDMA_DMA_CC_ERROR, edma_cc[ctlr]->intr_data [k].data); } diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 4a5903e04827..c1df4e9db140 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -69,6 +69,7 @@ CONFIG_KS8851=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_MDIO_SUN4I=y +CONFIG_TI_CPSW=y CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y @@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_EDAC=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 98a50c309b90..bfa80a11e8c7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index 002a1ceadceb..23591dba47a0 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -39,6 +39,7 @@ CONFIG_SPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y CONFIG_USB_GADGET=y CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index d57a85badb5e..3e2259b60236 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -12,6 +12,9 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS=y +CONFIG_PRINTK_TIME=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index ac632cc38f24..c6ebc184bf68 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM_RUNTIME=y @@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig new file mode 100644 index 000000000000..f0520176acd0 --- /dev/null +++ b/arch/arm/configs/vt8500_v6_v7_defconfig @@ -0,0 +1,90 @@ +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_WM8750=y +CONFIG_ARCH_WM8850=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_PROC_DEVICETREE=y +CONFIG_EEPROM_93CX6=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_VIA_VELOCITY=y +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_PHYLIB=y +CONFIG_INPUT_MATRIXKMAP=y +CONFIG_SERIAL_VT8500=y +CONFIG_SERIAL_VT8500_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_WMT=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_WM8750=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_MFD_SYSCON=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_ULPI=y +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_VT8500=y +CONFIG_DMADEVICES=y +CONFIG_COMMON_CLK_DEBUG=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_VT8500=y +CONFIG_RESET_CONTROLLER=y +CONFIG_GENERIC_PHY=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index 9b28f1243bdc..240b29ef17db 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -393,36 +393,6 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt, return slot_cnt; } -static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc) -{ - return 0; -} - -static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - - switch (chan->device->id) { - case DMA0_ID: - case DMA1_ID: - return hw_desc.dma->dest_addr; - case AAU_ID: - return hw_desc.aau->dest_addr; - default: - BUG(); - } - return 0; -} - - -static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - BUG(); - return 0; -} - static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan) { diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index 122f86d8c991..250760e08103 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -82,8 +82,6 @@ struct iop_adma_chan { * @slot_cnt: total slots used in an transaction (group of operations) * @slots_per_op: number of slots per operation * @idx: pool index - * @unmap_src_cnt: number of xor sources - * @unmap_len: transaction bytecount * @tx_list: list of descriptors that are associated with one operation * @async_tx: support for the async_tx api * @group_list: list of slots that make up a multi-descriptor transaction @@ -99,8 +97,6 @@ struct iop_adma_desc_slot { u16 slot_cnt; u16 slots_per_op; u16 idx; - u16 unmap_src_cnt; - size_t unmap_len; struct list_head tx_list; struct dma_async_tx_descriptor async_tx; union { diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 4dd21457ef9d..9ecccc865046 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -226,7 +226,14 @@ static inline phys_addr_t __virt_to_phys(unsigned long x) static inline unsigned long __phys_to_virt(phys_addr_t x) { unsigned long t; - __pv_stub(x, t, "sub", __PV_BITS_31_24); + + /* + * 'unsigned long' cast discard upper word when + * phys_addr_t is 64 bit, and makes sure that inline + * assembler expression receives 32 bit argument + * in place where 'r' 32 bit operand is expected. + */ + __pv_stub((unsigned long) x, t, "sub", __PV_BITS_31_24); return t; } diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index be956dbf6bae..1571d126e9dd 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t); * mapping to be mapped at. This is particularly important for * non-high vector CPUs. */ -#define FIRST_USER_ADDRESS PAGE_SIZE +#define FIRST_USER_ADDRESS (PAGE_SIZE * 2) /* * Use TASK_SIZE as the ceiling argument for free_pgtables() and diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index df5e13d64f2c..71a06b293489 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -140,12 +140,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, struct user_vfp_exc __user *); #endif -/* - * We use bit 30 of the preempt_count to indicate that kernel - * preemption is occurring. See . - */ -#define PREEMPT_ACTIVE 0x40000000 - /* * thread information flags: * TIF_SYSCALL_TRACE - syscall trace active diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 7801866e626a..11d59b32fb8d 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -508,6 +508,7 @@ __fixup_smp: teq r0, #0x0 @ '0' on actual UP A9 hardware beq __fixup_smp_on_up @ So its an A9 UP ldr r0, [r0, #4] @ read SCU Config +ARM_BE8(rev r0, r0) @ byteswap if big endian and r0, r0, #0x3 @ number of CPUs teq r0, #0x0 @ is 1? movne pc, lr @@ -643,8 +644,12 @@ ARM_BE8(rev16 ip, ip) ldrcc r7, [r4], #4 @ use branch for delay slot bcc 1b bx lr +#else +#ifdef CONFIG_CPU_ENDIAN_BE8 + moveq r0, #0x00004000 @ set bit 22, mov to mvn instruction #else moveq r0, #0x400000 @ set bit 22, mov to mvn instruction +#endif b 2f 1: ldr ip, [r7, r3] #ifdef CONFIG_CPU_ENDIAN_BE8 @@ -653,7 +658,7 @@ ARM_BE8(rev16 ip, ip) tst ip, #0x000f0000 @ check the rotation field orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24 biceq ip, ip, #0x00004000 @ clear bit 22 - orreq ip, ip, r0, lsl #24 @ mask in offset bits 7-0 + orreq ip, ip, r0 @ mask in offset bits 7-0 #else bic ip, ip, #0x000000ff tst ip, #0xf00 @ check the rotation field diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 57221e349a7c..f0d180d8b29f 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -14,11 +14,12 @@ #include #include #include +#include #include #include #include -extern const unsigned char relocate_new_kernel[]; +extern void relocate_new_kernel(void); extern const unsigned int relocate_new_kernel_size; extern unsigned long kexec_start_address; @@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image) { unsigned long page_list; unsigned long reboot_code_buffer_phys; + unsigned long reboot_entry = (unsigned long)relocate_new_kernel; + unsigned long reboot_entry_phys; void *reboot_code_buffer; /* @@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image) /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); + reboot_entry = fncpy(reboot_code_buffer, + reboot_entry, + relocate_new_kernel_size); + reboot_entry_phys = (unsigned long)reboot_entry + + (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer); - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) kexec_reinit(); - soft_restart(reboot_code_buffer_phys); + soft_restart(reboot_entry_phys); } diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index d0cdedf4864d..95858966d84e 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -2,10 +2,12 @@ * relocate_kernel.S - put the kernel image in place to boot */ +#include #include - .globl relocate_new_kernel -relocate_new_kernel: + .align 3 /* not needed for this code, but keeps fncpy() happy */ + +ENTRY(relocate_new_kernel) ldr r0,kexec_indirection_page ldr r1,kexec_start_address @@ -79,6 +81,8 @@ kexec_mach_type: kexec_boot_atags: .long 0x0 +ENDPROC(relocate_new_kernel) + relocate_new_kernel_end: .globl relocate_new_kernel_size diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S index 3c5d0f2170fd..b84d0cb13682 100644 --- a/arch/arm/kernel/sigreturn_codes.S +++ b/arch/arm/kernel/sigreturn_codes.S @@ -30,6 +30,27 @@ * snippets. */ +/* + * In CPU_THUMBONLY case kernel arm opcodes are not allowed. + * Note in this case codes skips those instructions but it uses .org + * directive to keep correct layout of sigreturn_codes array. + */ +#ifndef CONFIG_CPU_THUMBONLY +#define ARM_OK(code...) code +#else +#define ARM_OK(code...) +#endif + + .macro arm_slot n + .org sigreturn_codes + 12 * (\n) +ARM_OK( .arm ) + .endm + + .macro thumb_slot n + .org sigreturn_codes + 12 * (\n) + 8 + .thumb + .endm + #if __LINUX_ARM_ARCH__ <= 4 /* * Note we manually set minimally required arch that supports @@ -45,26 +66,27 @@ .global sigreturn_codes .type sigreturn_codes, #object - .arm + .align sigreturn_codes: /* ARM sigreturn syscall code snippet */ - mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) - swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) + arm_slot 0 +ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) ) +ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) /* Thumb sigreturn syscall code snippet */ - .thumb + thumb_slot 0 movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) swi #0 /* ARM sigreturn_rt syscall code snippet */ - .arm - mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) - swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) + arm_slot 1 +ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) ) +ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) /* Thumb sigreturn_rt syscall code snippet */ - .thumb + thumb_slot 1 movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) swi #0 @@ -74,7 +96,7 @@ sigreturn_codes: * it is thumb case or not, so we need additional * word after real last entry. */ - .arm + arm_slot 2 .space 4 .size sigreturn_codes, . - sigreturn_codes diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 6125f259b7b5..dbf0923e8d76 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -856,7 +856,7 @@ static void __init kuser_init(void *vectors) memcpy(vectors + 0xfe0, vectors + 0xfe8, 4); } #else -static void __init kuser_init(void *vectors) +static inline void __init kuser_init(void *vectors) { } #endif diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 371958370de4..580906989db1 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -334,6 +334,17 @@ out: return err; } +static phys_addr_t kvm_kaddr_to_phys(void *kaddr) +{ + if (!is_vmalloc_addr(kaddr)) { + BUG_ON(!virt_addr_valid(kaddr)); + return __pa(kaddr); + } else { + return page_to_phys(vmalloc_to_page(kaddr)) + + offset_in_page(kaddr); + } +} + /** * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode * @from: The virtual kernel start address of the range @@ -345,16 +356,27 @@ out: */ int create_hyp_mappings(void *from, void *to) { - unsigned long phys_addr = virt_to_phys(from); + phys_addr_t phys_addr; + unsigned long virt_addr; unsigned long start = KERN_TO_HYP((unsigned long)from); unsigned long end = KERN_TO_HYP((unsigned long)to); - /* Check for a valid kernel memory mapping */ - if (!virt_addr_valid(from) || !virt_addr_valid(to - 1)) - return -EINVAL; + start = start & PAGE_MASK; + end = PAGE_ALIGN(end); - return __create_hyp_mappings(hyp_pgd, start, end, - __phys_to_pfn(phys_addr), PAGE_HYP); + for (virt_addr = start; virt_addr < end; virt_addr += PAGE_SIZE) { + int err; + + phys_addr = kvm_kaddr_to_phys(from + virt_addr - start); + err = __create_hyp_mappings(hyp_pgd, virt_addr, + virt_addr + PAGE_SIZE, + __phys_to_pfn(phys_addr), + PAGE_HYP); + if (err) + return err; + } + + return 0; } /** diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index e0c68d5bb7dc..52886b89706c 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -10,7 +10,7 @@ UNWIND( .fnstart ) and r3, r0, #31 @ Get bit offset mov r0, r0, lsr #5 add r1, r1, r0, lsl #2 @ Get word offset -#if __LINUX_ARM_ARCH__ >= 7 +#if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP) .arch_extension mp ALT_SMP(W(pldw) [r1]) ALT_UP(W(nop)) diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index 36b668d8e121..bc1033b897b4 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 /* * loops = r0 * HZ * loops_per_jiffy / 1000000 */ + .align 3 @ Delay routine ENTRY(__loop_delay) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index c1b737097c95..90aab2d5a07f 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o setup.o +obj-y := irq.o gpio.o setup.o sysirq_mask.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index f607deb40f4d..bc7b363a3083 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index f8629a3fa245..d6a1fa85371d 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -351,6 +351,8 @@ static void __init at91sam9260_initialize(void) arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; + at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); + /* Register GPIO subsystem */ at91_gpio_init(at91sam9260_gpio, 3); } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 1f3867a17a28..23ba1d8a1531 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -293,6 +293,8 @@ static void __init at91sam9261_initialize(void) arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; + at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT); + /* Register GPIO subsystem */ at91_gpio_init(at91sam9261_gpio, 3); } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 90d455d294a1..7eccb0fc57bc 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -330,6 +330,9 @@ static void __init at91sam9263_initialize(void) arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; + at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0); + at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1); + /* Register GPIO subsystem */ at91_gpio_init(at91sam9263_gpio, 5); } diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index e9bf0b8f40eb..9405aa08b104 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -379,6 +379,9 @@ static void __init at91sam9g45_initialize(void) arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9g45_restart; + at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC); + at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT); + /* Register GPIO subsystem */ at91_gpio_init(at91sam9g45_gpio, 5); } diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 2d895a297739..388ec3aec4b9 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -224,7 +224,13 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } +static void __init at91sam9n12_initialize(void) +{ + at91_sysirq_mask_rtc(AT91SAM9N12_BASE_RTC); +} + AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, + .init = at91sam9n12_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 88995af09c04..0750ffb7e6b1 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -296,6 +296,9 @@ static void __init at91sam9rl_initialize(void) arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; + at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC); + at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT); + /* Register GPIO subsystem */ at91_gpio_init(at91sam9rl_gpio, 4); } diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 916e5a142917..e8a2e075a1b8 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -322,6 +322,11 @@ static void __init at91sam9x5_map_io(void) at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); } +static void __init at91sam9x5_initialize(void) +{ + at91_sysirq_mask_rtc(AT91SAM9X5_BASE_RTC); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -329,4 +334,5 @@ static void __init at91sam9x5_map_io(void) AT91_SOC_START(at91sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, + .init = at91sam9x5_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 0b153c87521d..f4f8735315da 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 8b4942cbb6d9..2f931915c80c 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index dc6e2f5f804d..26dee3ce9397 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -34,6 +34,8 @@ extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, struct device_node *parent); +extern void __init at91_sysirq_mask_rtc(u32 rtc_base); +extern void __init at91_sysirq_mask_rtt(u32 rtt_base); /* Timer */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h index d374b87c0459..0151bcf6163c 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9n12.h +++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h @@ -48,6 +48,11 @@ #define AT91SAM9N12_BASE_USART2 0xf8024000 #define AT91SAM9N12_BASE_USART3 0xf8028000 +/* + * System Peripherals + */ +#define AT91SAM9N12_BASE_RTC 0xfffffeb0 + /* * Internal Memory. */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h index c75ee19b58d3..2fc76c49e97c 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -54,6 +54,11 @@ #define AT91SAM9X5_BASE_USART1 0xf8020000 #define AT91SAM9X5_BASE_USART2 0xf8024000 +/* + * System Peripherals + */ +#define AT91SAM9X5_BASE_RTC 0xfffffeb0 + /* * Internal Memory. */ diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h index 31096a8aaf1d..25613d8c6dcd 100644 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -72,6 +72,11 @@ #define SAMA5D3_BASE_USART2 0xf8020000 #define SAMA5D3_BASE_USART3 0xf8024000 +/* + * System Peripherals + */ +#define SAMA5D3_BASE_RTC 0xfffffeb0 + /* * Internal Memory */ diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 3ed190ce062b..c5101dcb4fb0 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -16,7 +16,11 @@ #include #include +#ifdef CONFIG_PM extern void at91_pm_set_standby(void (*at91_standby)(void)); +#else +static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } +#endif /* * The AT91RM9200 goes into self-refresh mode with this command, and will diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 401279715ab1..a28873fe3049 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -95,19 +95,19 @@ static struct clk twi0_clk = { .name = "twi0_clk", .pid = SAMA5D3_ID_TWI0, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi1_clk = { .name = "twi1_clk", .pid = SAMA5D3_ID_TWI1, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi2_clk = { .name = "twi2_clk", .pid = SAMA5D3_ID_TWI2, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk mmc0_clk = { .name = "mci0_clk", @@ -371,7 +371,13 @@ static void __init sama5d3_map_io(void) at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE); } +static void __init sama5d3_initialize(void) +{ + at91_sysirq_mask_rtc(SAMA5D3_BASE_RTC); +} + AT91_SOC_START(sama5d3) .map_io = sama5d3_map_io, .register_clocks = sama5d3_register_clocks, + .init = sama5d3_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/sysirq_mask.c b/arch/arm/mach-at91/sysirq_mask.c new file mode 100644 index 000000000000..2ba694f9626b --- /dev/null +++ b/arch/arm/mach-at91/sysirq_mask.c @@ -0,0 +1,71 @@ +/* + * sysirq_mask.c - System-interrupt masking + * + * Copyright (C) 2013 Johan Hovold + * + * Functions to disable system interrupts from backup-powered peripherals. + * + * The RTC and RTT-peripherals are generally powered by backup power (VDDBU) + * and are not reset on wake-up, user, watchdog or software reset. This means + * that their interrupts may be enabled during early boot (e.g. after a user + * reset). + * + * As the RTC and RTT share the system-interrupt line with the PIT, an + * interrupt occurring before a handler has been installed would lead to the + * system interrupt being disabled and prevent the system from booting. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include + +#include "generic.h" + +#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ +#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ + +void __init at91_sysirq_mask_rtc(u32 rtc_base) +{ + void __iomem *base; + u32 mask; + + base = ioremap(rtc_base, 64); + if (!base) + return; + + mask = readl_relaxed(base + AT91_RTC_IMR); + if (mask) { + pr_info("AT91: Disabling rtc irq\n"); + writel_relaxed(mask, base + AT91_RTC_IDR); + (void)readl_relaxed(base + AT91_RTC_IMR); /* flush */ + } + + iounmap(base); +} + +void __init at91_sysirq_mask_rtt(u32 rtt_base) +{ + void __iomem *base; + void __iomem *reg; + u32 mode; + + base = ioremap(rtt_base, 16); + if (!base) + return; + + reg = base + AT91_RTT_MR; + + mode = readl_relaxed(reg); + if (mode & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)) { + pr_info("AT91: Disabling rtt irq\n"); + mode &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); + writel_relaxed(mode, reg); + (void)readl_relaxed(reg); /* flush */ + } + + iounmap(base); +} diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 40f15f133c55..d1f45af7a530 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index df16cb88a26b..e0af0eccde8f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index f4a6c18912ea..e08a8684ead2 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 9cc32c283b8b..987605b78556 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 44b20191a9fe..13d0801fd6b1 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index cd0f58730c2b..7aa105b1fd0f 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index d84360148100..41c7c9615791 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index c46eccbbd512..78829c513fdc 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -487,7 +487,7 @@ int __init da8xx_register_emac(void) static struct resource da830_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DA830_MCASP1_REG_BASE, .end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, @@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = { static struct resource da850_mcasp_resources[] = { { - .name = "mcasp", + .name = "mpu", .start = DAVINCI_DA8XX_MCASP0_REG_BASE, .end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index ef9ff1fb6f52..6117fc644188 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = { static struct resource dm355_asp1_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP1_BASE, .end = DAVINCI_ASP1_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, @@ -906,7 +907,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = { int __init dm355_gpio_register(void) { return davinci_gpio_register(dm355_gpio_resources, - sizeof(dm355_gpio_resources), + ARRAY_SIZE(dm355_gpio_resources), &dm355_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 1511a0680f9a..d7c6f85d3fc9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = { int __init dm365_gpio_register(void) { return davinci_gpio_register(dm365_gpio_resources, - sizeof(dm365_gpio_resources), + ARRAY_SIZE(dm365_gpio_resources), &dm365_gpio_platform_data); } @@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = { static struct resource dm365_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_DM365_ASP0_BASE, .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 143a3217e8ef..3ce47997bb46 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = { /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ static struct resource dm644x_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP0_BASE, .end = DAVINCI_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, @@ -792,7 +793,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = { int __init dm644x_gpio_register(void) { return davinci_gpio_register(dm644_gpio_resources, - sizeof(dm644_gpio_resources), + ARRAY_SIZE(dm644_gpio_resources), &dm644_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 2a73f299c1d0..0e81fea65e7f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = { static struct resource dm646x_mcasp0_resources[] = { { - .name = "mcasp0", + .name = "mpu", .start = DAVINCI_DM646X_MCASP0_REG_BASE, .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, @@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = { static struct resource dm646x_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DM646X_MCASP1_REG_BASE, .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, @@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { int __init dm646x_gpio_register(void) { return davinci_gpio_register(dm646x_gpio_resources, - sizeof(dm646x_gpio_resources), + ARRAY_SIZE(dm646x_gpio_resources), &dm646x_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 2739ca2c1334..e0091685fd48 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,6 +15,7 @@ #include #include #include +#include