reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.

Add a reset controller driver for Xilinx Zynq UltraScale+ MPSoC.
The zynqmp reset-controller has the ability to reset lines
connected to different blocks and peripheral in the Soc.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This commit is contained in:
Nava kishore Manne 2019-01-25 13:16:54 +05:30 коммит произвёл Michal Simek
Родитель 3f1b66be4a
Коммит 62f0d7dc3b
2 изменённых файлов: 115 добавлений и 0 удалений

Просмотреть файл

@ -25,4 +25,5 @@ obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o

Просмотреть файл

@ -0,0 +1,114 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Xilinx, Inc.
*
*/
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/firmware/xlnx-zynqmp.h>
#define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START)
#define ZYNQMP_RESET_ID ZYNQMP_PM_RESET_START
struct zynqmp_reset_data {
struct reset_controller_dev rcdev;
const struct zynqmp_eemi_ops *eemi_ops;
};
static inline struct zynqmp_reset_data *
to_zynqmp_reset_data(struct reset_controller_dev *rcdev)
{
return container_of(rcdev, struct zynqmp_reset_data, rcdev);
}
static int zynqmp_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id,
PM_RESET_ACTION_ASSERT);
}
static int zynqmp_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id,
PM_RESET_ACTION_RELEASE);
}
static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
int val, err;
err = priv->eemi_ops->reset_get_status(ZYNQMP_RESET_ID + id, &val);
if (err)
return err;
return val;
}
static int zynqmp_reset_reset(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id,
PM_RESET_ACTION_PULSE);
}
static struct reset_control_ops zynqmp_reset_ops = {
.reset = zynqmp_reset_reset,
.assert = zynqmp_reset_assert,
.deassert = zynqmp_reset_deassert,
.status = zynqmp_reset_status,
};
static int zynqmp_reset_probe(struct platform_device *pdev)
{
struct zynqmp_reset_data *priv;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform_set_drvdata(pdev, priv);
priv->eemi_ops = zynqmp_pm_get_eemi_ops();
if (!priv->eemi_ops)
return -ENXIO;
priv->rcdev.ops = &zynqmp_reset_ops;
priv->rcdev.owner = THIS_MODULE;
priv->rcdev.of_node = pdev->dev.of_node;
priv->rcdev.nr_resets = ZYNQMP_NR_RESETS;
return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
}
static const struct of_device_id zynqmp_reset_dt_ids[] = {
{ .compatible = "xlnx,zynqmp-reset", },
{ /* sentinel */ },
};
static struct platform_driver zynqmp_reset_driver = {
.probe = zynqmp_reset_probe,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = zynqmp_reset_dt_ids,
},
};
static int __init zynqmp_reset_init(void)
{
return platform_driver_register(&zynqmp_reset_driver);
}
arch_initcall(zynqmp_reset_init);