net: phy: marvell10g: Use a #define for 88X3310 family id

The PHY ID corresponding to the 88X3310 is also used for other PHYs in
the same family, such as the 88E2010. Use a #define for the PHY id, that
ignores the last nibble.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell10g.c

@@ -430,7 +430,7 @@ static int mv3310_read_status(struct phy_device *phydev)
 
 static struct phy_driver mv3310_drivers[] = {
 	{
-		.phy_id		= 0x002b09aa,
+		.phy_id		= MARVELL_PHY_ID_88X3310,
 		.phy_id_mask	= MARVELL_PHY_ID_MASK,
 		.name		= "mv88x3310",
 		.get_features	= mv3310_get_features,
@@ -448,7 +448,7 @@ static struct phy_driver mv3310_drivers[] = {
 module_phy_driver(mv3310_drivers);
 
 static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
-	{ 0x002b09aa, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
 	{ },
 };
 MODULE_DEVICE_TABLE(mdio, mv3310_tbl);

include/linux/marvell_phy.h

@@ -20,6 +20,7 @@
 #define MARVELL_PHY_ID_88E1540		0x01410eb0
 #define MARVELL_PHY_ID_88E1545		0x01410ea0
 #define MARVELL_PHY_ID_88E3016		0x01410e60
+#define MARVELL_PHY_ID_88X3310		0x002b09a0
 
 /* The MV88e6390 Ethernet switch contains embedded PHYs. These PHYs do
  * not have a model ID. So the switch driver traps reads to the ID2