From 633b11bee40c37fed3e9384f04a889af32fb8cf1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 14 May 2017 08:48:40 -0300 Subject: [PATCH] cgroup-v2.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Comment the internal index; - Use :Date: and :Author: for authorship; - Mark titles; - Mark literal blocks; - Adjust witespaces; - Mark notes; - Use table notation for the existing tables. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Corbet --- Documentation/cgroup-v2.txt | 452 +++++++++++++++++++----------------- 1 file changed, 235 insertions(+), 217 deletions(-) diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index e6101976e0f1..bde177103567 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -1,7 +1,9 @@ - +================ Control Group v2 +================ -October, 2015 Tejun Heo +:Date: October, 2015 +:Author: Tejun Heo This is the authoritative documentation on the design, interface and conventions of cgroup v2. It describes all userland-visible aspects @@ -9,70 +11,72 @@ of cgroup including core and specific controller behaviors. All future changes must be reflected in this document. Documentation for v1 is available under Documentation/cgroup-v1/. -CONTENTS +.. CONTENTS -1. Introduction - 1-1. Terminology - 1-2. What is cgroup? -2. Basic Operations - 2-1. Mounting - 2-2. Organizing Processes - 2-3. [Un]populated Notification - 2-4. Controlling Controllers - 2-4-1. Enabling and Disabling - 2-4-2. Top-down Constraint - 2-4-3. No Internal Process Constraint - 2-5. Delegation - 2-5-1. Model of Delegation - 2-5-2. Delegation Containment - 2-6. Guidelines - 2-6-1. Organize Once and Control - 2-6-2. Avoid Name Collisions -3. Resource Distribution Models - 3-1. Weights - 3-2. Limits - 3-3. Protections - 3-4. Allocations -4. Interface Files - 4-1. Format - 4-2. Conventions - 4-3. Core Interface Files -5. Controllers - 5-1. CPU - 5-1-1. CPU Interface Files - 5-2. Memory - 5-2-1. Memory Interface Files - 5-2-2. Usage Guidelines - 5-2-3. Memory Ownership - 5-3. IO - 5-3-1. IO Interface Files - 5-3-2. Writeback - 5-4. PID - 5-4-1. PID Interface Files - 5-5. RDMA - 5-5-1. RDMA Interface Files - 5-6. Misc - 5-6-1. perf_event -6. Namespace - 6-1. Basics - 6-2. The Root and Views - 6-3. Migration and setns(2) - 6-4. Interaction with Other Namespaces -P. Information on Kernel Programming - P-1. Filesystem Support for Writeback -D. Deprecated v1 Core Features -R. Issues with v1 and Rationales for v2 - R-1. Multiple Hierarchies - R-2. Thread Granularity - R-3. Competition Between Inner Nodes and Threads - R-4. Other Interface Issues - R-5. Controller Issues and Remedies - R-5-1. Memory + 1. Introduction + 1-1. Terminology + 1-2. What is cgroup? + 2. Basic Operations + 2-1. Mounting + 2-2. Organizing Processes + 2-3. [Un]populated Notification + 2-4. Controlling Controllers + 2-4-1. Enabling and Disabling + 2-4-2. Top-down Constraint + 2-4-3. No Internal Process Constraint + 2-5. Delegation + 2-5-1. Model of Delegation + 2-5-2. Delegation Containment + 2-6. Guidelines + 2-6-1. Organize Once and Control + 2-6-2. Avoid Name Collisions + 3. Resource Distribution Models + 3-1. Weights + 3-2. Limits + 3-3. Protections + 3-4. Allocations + 4. Interface Files + 4-1. Format + 4-2. Conventions + 4-3. Core Interface Files + 5. Controllers + 5-1. CPU + 5-1-1. CPU Interface Files + 5-2. Memory + 5-2-1. Memory Interface Files + 5-2-2. Usage Guidelines + 5-2-3. Memory Ownership + 5-3. IO + 5-3-1. IO Interface Files + 5-3-2. Writeback + 5-4. PID + 5-4-1. PID Interface Files + 5-5. RDMA + 5-5-1. RDMA Interface Files + 5-6. Misc + 5-6-1. perf_event + 6. Namespace + 6-1. Basics + 6-2. The Root and Views + 6-3. Migration and setns(2) + 6-4. Interaction with Other Namespaces + P. Information on Kernel Programming + P-1. Filesystem Support for Writeback + D. Deprecated v1 Core Features + R. Issues with v1 and Rationales for v2 + R-1. Multiple Hierarchies + R-2. Thread Granularity + R-3. Competition Between Inner Nodes and Threads + R-4. Other Interface Issues + R-5. Controller Issues and Remedies + R-5-1. Memory -1. Introduction +Introduction +============ -1-1. Terminology +Terminology +----------- "cgroup" stands for "control group" and is never capitalized. The singular form is used to designate the whole feature and also as a @@ -80,7 +84,8 @@ qualifier as in "cgroup controllers". When explicitly referring to multiple individual control groups, the plural form "cgroups" is used. -1-2. What is cgroup? +What is cgroup? +--------------- cgroup is a mechanism to organize processes hierarchically and distribute system resources along the hierarchy in a controlled and @@ -110,12 +115,14 @@ restrictions set closer to the root in the hierarchy can not be overridden from further away. -2. Basic Operations +Basic Operations +================ -2-1. Mounting +Mounting +-------- Unlike v1, cgroup v2 has only single hierarchy. The cgroup v2 -hierarchy can be mounted with the following mount command. +hierarchy can be mounted with the following mount command:: # mount -t cgroup2 none $MOUNT_POINT @@ -160,10 +167,11 @@ cgroup v2 currently supports the following mount options. Delegation section for details. -2-2. Organizing Processes +Organizing Processes +-------------------- Initially, only the root cgroup exists to which all processes belong. -A child cgroup can be created by creating a sub-directory. +A child cgroup can be created by creating a sub-directory:: # mkdir $CGROUP_NAME @@ -190,28 +198,29 @@ moved to another cgroup. A cgroup which doesn't have any children or live processes can be destroyed by removing the directory. Note that a cgroup which doesn't have any children and is associated only with zombie processes is -considered empty and can be removed. +considered empty and can be removed:: # rmdir $CGROUP_NAME "/proc/$PID/cgroup" lists a process's cgroup membership. If legacy cgroup is in use in the system, this file may contain multiple lines, one for each hierarchy. The entry for cgroup v2 is always in the -format "0::$PATH". +format "0::$PATH":: # cat /proc/842/cgroup ... 0::/test-cgroup/test-cgroup-nested If the process becomes a zombie and the cgroup it was associated with -is removed subsequently, " (deleted)" is appended to the path. +is removed subsequently, " (deleted)" is appended to the path:: # cat /proc/842/cgroup ... 0::/test-cgroup/test-cgroup-nested (deleted) -2-3. [Un]populated Notification +[Un]populated Notification +-------------------------- Each non-root cgroup has a "cgroup.events" file which contains "populated" field indicating whether the cgroup's sub-hierarchy has @@ -222,7 +231,7 @@ example, to start a clean-up operation after all processes of a given sub-hierarchy have exited. The populated state updates and notifications are recursive. Consider the following sub-hierarchy where the numbers in the parentheses represent the numbers of processes -in each cgroup. +in each cgroup:: A(4) - B(0) - C(1) \ D(0) @@ -233,18 +242,20 @@ file modified events will be generated on the "cgroup.events" files of both cgroups. -2-4. Controlling Controllers +Controlling Controllers +----------------------- -2-4-1. Enabling and Disabling +Enabling and Disabling +~~~~~~~~~~~~~~~~~~~~~~ Each cgroup has a "cgroup.controllers" file which lists all -controllers available for the cgroup to enable. +controllers available for the cgroup to enable:: # cat cgroup.controllers cpu io memory No controller is enabled by default. Controllers can be enabled and -disabled by writing to the "cgroup.subtree_control" file. +disabled by writing to the "cgroup.subtree_control" file:: # echo "+cpu +memory -io" > cgroup.subtree_control @@ -256,7 +267,7 @@ are specified, the last one is effective. Enabling a controller in a cgroup indicates that the distribution of the target resource across its immediate children will be controlled. Consider the following sub-hierarchy. The enabled controllers are -listed in parentheses. +listed in parentheses:: A(cpu,memory) - B(memory) - C() \ D() @@ -276,7 +287,8 @@ controller interface files - anything which doesn't start with "cgroup." are owned by the parent rather than the cgroup itself. -2-4-2. Top-down Constraint +Top-down Constraint +~~~~~~~~~~~~~~~~~~~ Resources are distributed top-down and a cgroup can further distribute a resource only if the resource has been distributed to it from the @@ -287,7 +299,8 @@ the parent has the controller enabled and a controller can't be disabled if one or more children have it enabled. -2-4-3. No Internal Process Constraint +No Internal Process Constraint +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Non-root cgroups can only distribute resources to their children when they don't have any processes of their own. In other words, only @@ -314,9 +327,11 @@ children before enabling controllers in its "cgroup.subtree_control" file. -2-5. Delegation +Delegation +---------- -2-5-1. Model of Delegation +Model of Delegation +~~~~~~~~~~~~~~~~~~~ A cgroup can be delegated in two ways. First, to a less privileged user by granting write access of the directory and its "cgroup.procs" @@ -345,7 +360,8 @@ cgroups in or nesting depth of a delegated sub-hierarchy; however, this may be limited explicitly in the future. -2-5-2. Delegation Containment +Delegation Containment +~~~~~~~~~~~~~~~~~~~~~~ A delegated sub-hierarchy is contained in the sense that processes can't be moved into or out of the sub-hierarchy by the delegatee. @@ -366,7 +382,7 @@ in from or push out to outside the sub-hierarchy. For an example, let's assume cgroups C0 and C1 have been delegated to user U0 who created C00, C01 under C0 and C10 under C1 as follows and -all processes under C0 and C1 belong to U0. +all processes under C0 and C1 belong to U0:: ~~~~~~~~~~~~~ - C0 - C00 ~ cgroup ~ \ C01 @@ -386,9 +402,11 @@ namespace of the process which is attempting the migration. If either is not reachable, the migration is rejected with -ENOENT. -2-6. Guidelines +Guidelines +---------- -2-6-1. Organize Once and Control +Organize Once and Control +~~~~~~~~~~~~~~~~~~~~~~~~~ Migrating a process across cgroups is a relatively expensive operation and stateful resources such as memory are not moved together with the @@ -404,7 +422,8 @@ distribution can be made by changing controller configuration through the interface files. -2-6-2. Avoid Name Collisions +Avoid Name Collisions +~~~~~~~~~~~~~~~~~~~~~ Interface files for a cgroup and its children cgroups occupy the same directory and it is possible to create children cgroups which collide @@ -422,14 +441,16 @@ cgroup doesn't do anything to prevent name collisions and it's the user's responsibility to avoid them. -3. Resource Distribution Models +Resource Distribution Models +============================ cgroup controllers implement several resource distribution schemes depending on the resource type and expected use cases. This section describes major schemes in use along with their expected behaviors. -3-1. Weights +Weights +------- A parent's resource is distributed by adding up the weights of all active children and giving each the fraction matching the ratio of its @@ -450,7 +471,8 @@ process migrations. and is an example of this type. -3-2. Limits +Limits +------ A child can only consume upto the configured amount of the resource. Limits can be over-committed - the sum of the limits of children can @@ -466,7 +488,8 @@ process migrations. on an IO device and is an example of this type. -3-3. Protections +Protections +----------- A cgroup is protected to be allocated upto the configured amount of the resource if the usages of all its ancestors are under their @@ -486,7 +509,8 @@ process migrations. example of this type. -3-4. Allocations +Allocations +----------- A cgroup is exclusively allocated a certain amount of a finite resource. Allocations can't be over-committed - the sum of the @@ -505,12 +529,14 @@ may be rejected. type. -4. Interface Files +Interface Files +=============== -4-1. Format +Format +------ All interface files should be in one of the following formats whenever -possible. +possible:: New-line separated values (when only one value can be written at once) @@ -545,7 +571,8 @@ can be written at a time. For nested keyed files, the sub key pairs may be specified in any order and not all pairs have to be specified. -4-2. Conventions +Conventions +----------- - Settings for a single feature should be contained in a single file. @@ -581,25 +608,25 @@ may be specified in any order and not all pairs have to be specified. with "default" as the value must not appear when read. For example, a setting which is keyed by major:minor device numbers - with integer values may look like the following. + with integer values may look like the following:: # cat cgroup-example-interface-file default 150 8:0 300 - The default value can be updated by + The default value can be updated by:: # echo 125 > cgroup-example-interface-file - or + or:: # echo "default 125" > cgroup-example-interface-file - An override can be set by + An override can be set by:: # echo "8:16 170" > cgroup-example-interface-file - and cleared by + and cleared by:: # echo "8:0 default" > cgroup-example-interface-file # cat cgroup-example-interface-file @@ -612,12 +639,12 @@ may be specified in any order and not all pairs have to be specified. generated on the file. -4-3. Core Interface Files +Core Interface Files +-------------------- All cgroup core files are prefixed with "cgroup." cgroup.procs - A read-write new-line separated values file which exists on all cgroups. @@ -643,7 +670,6 @@ All cgroup core files are prefixed with "cgroup." should be granted along with the containing directory. cgroup.controllers - A read-only space separated values file which exists on all cgroups. @@ -651,7 +677,6 @@ All cgroup core files are prefixed with "cgroup." the cgroup. The controllers are not ordered. cgroup.subtree_control - A read-write space separated values file which exists on all cgroups. Starts out empty. @@ -667,23 +692,25 @@ All cgroup core files are prefixed with "cgroup." operations are specified, either all succeed or all fail. cgroup.events - A read-only flat-keyed file which exists on non-root cgroups. The following entries are defined. Unless specified otherwise, a value change in this file generates a file modified event. populated - 1 if the cgroup or its descendants contains any live processes; otherwise, 0. -5. Controllers +Controllers +=========== -5-1. CPU +CPU +--- -[NOTE: The interface for the cpu controller hasn't been merged yet] +.. note:: + + The interface for the cpu controller hasn't been merged yet The "cpu" controllers regulates distribution of CPU cycles. This controller implements weight and absolute bandwidth limit models for @@ -691,36 +718,34 @@ normal scheduling policy and absolute bandwidth allocation model for realtime scheduling policy. -5-1-1. CPU Interface Files +CPU Interface Files +~~~~~~~~~~~~~~~~~~~ All time durations are in microseconds. cpu.stat - A read-only flat-keyed file which exists on non-root cgroups. - It reports the following six stats. + It reports the following six stats: - usage_usec - user_usec - system_usec - nr_periods - nr_throttled - throttled_usec + - usage_usec + - user_usec + - system_usec + - nr_periods + - nr_throttled + - throttled_usec cpu.weight - A read-write single value file which exists on non-root cgroups. The default is "100". The weight in the range [1, 10000]. cpu.max - A read-write two value file which exists on non-root cgroups. The default is "max 100000". - The maximum bandwidth limit. It's in the following format. + The maximum bandwidth limit. It's in the following format:: $MAX $PERIOD @@ -729,9 +754,10 @@ All time durations are in microseconds. one number is written, $MAX is updated. cpu.rt.max + .. note:: - [NOTE: The semantics of this file is still under discussion and the - interface hasn't been merged yet] + The semantics of this file is still under discussion and the + interface hasn't been merged yet A read-write two value file which exists on all cgroups. The default is "0 100000". @@ -739,7 +765,7 @@ All time durations are in microseconds. The maximum realtime runtime allocation. Over-committing configurations are disallowed and process migrations are rejected if not enough bandwidth is available. It's in the - following format. + following format:: $MAX $PERIOD @@ -748,7 +774,8 @@ All time durations are in microseconds. updated. -5-2. Memory +Memory +------ The "memory" controller regulates distribution of memory. Memory is stateful and implements both limit and protection models. Due to the @@ -770,14 +797,14 @@ following types of memory usages are tracked. The above list may expand in the future for better coverage. -5-2-1. Memory Interface Files +Memory Interface Files +~~~~~~~~~~~~~~~~~~~~~~ All memory amounts are in bytes. If a value which is not aligned to PAGE_SIZE is written, the value may be rounded up to the closest PAGE_SIZE multiple when read back. memory.current - A read-only single value file which exists on non-root cgroups. @@ -785,7 +812,6 @@ PAGE_SIZE multiple when read back. and its descendants. memory.low - A read-write single value file which exists on non-root cgroups. The default is "0". @@ -798,7 +824,6 @@ PAGE_SIZE multiple when read back. protection is discouraged. memory.high - A read-write single value file which exists on non-root cgroups. The default is "max". @@ -811,7 +836,6 @@ PAGE_SIZE multiple when read back. under extreme conditions the limit may be breached. memory.max - A read-write single value file which exists on non-root cgroups. The default is "max". @@ -826,21 +850,18 @@ PAGE_SIZE multiple when read back. utility is limited to providing the final safety net. memory.events - A read-only flat-keyed file which exists on non-root cgroups. The following entries are defined. Unless specified otherwise, a value change in this file generates a file modified event. low - The number of times the cgroup is reclaimed due to high memory pressure even though its usage is under the low boundary. This usually indicates that the low boundary is over-committed. high - The number of times processes of the cgroup are throttled and routed to perform direct memory reclaim because the high memory boundary was exceeded. For a @@ -849,13 +870,11 @@ PAGE_SIZE multiple when read back. occurrences are expected. max - The number of times the cgroup's memory usage was about to go over the max boundary. If direct reclaim fails to bring it down, the cgroup goes to OOM state. oom - The number of time the cgroup's memory usage was reached the limit and allocation was about to fail. @@ -864,16 +883,14 @@ PAGE_SIZE multiple when read back. Failed allocation in its turn could be returned into userspace as -ENOMEM or siletly ignored in cases like - disk readahead. For now OOM in memory cgroup kills + disk readahead. For now OOM in memory cgroup kills tasks iff shortage has happened inside page fault. oom_kill - The number of processes belonging to this cgroup killed by any kind of OOM killer. memory.stat - A read-only flat-keyed file which exists on non-root cgroups. This breaks down the cgroup's memory footprint into different @@ -887,73 +904,55 @@ PAGE_SIZE multiple when read back. fixed position; use the keys to look up specific values! anon - Amount of memory used in anonymous mappings such as brk(), sbrk(), and mmap(MAP_ANONYMOUS) file - Amount of memory used to cache filesystem data, including tmpfs and shared memory. kernel_stack - Amount of memory allocated to kernel stacks. slab - Amount of memory used for storing in-kernel data structures. sock - Amount of memory used in network transmission buffers shmem - Amount of cached filesystem data that is swap-backed, such as tmpfs, shm segments, shared anonymous mmap()s file_mapped - Amount of cached filesystem data mapped with mmap() file_dirty - Amount of cached filesystem data that was modified but not yet written back to disk file_writeback - Amount of cached filesystem data that was modified and is currently being written back to disk - inactive_anon - active_anon - inactive_file - active_file - unevictable - + inactive_anon, active_anon, inactive_file, active_file, unevictable Amount of memory, swap-backed and filesystem-backed, on the internal memory management lists used by the page reclaim algorithm slab_reclaimable - Part of "slab" that might be reclaimed, such as dentries and inodes. slab_unreclaimable - Part of "slab" that cannot be reclaimed on memory pressure. pgfault - Total number of page faults incurred pgmajfault - Number of major page faults incurred workingset_refault @@ -997,7 +996,6 @@ PAGE_SIZE multiple when read back. Amount of reclaimed lazyfree pages memory.swap.current - A read-only single value file which exists on non-root cgroups. @@ -1005,7 +1003,6 @@ PAGE_SIZE multiple when read back. and its descendants. memory.swap.max - A read-write single value file which exists on non-root cgroups. The default is "max". @@ -1013,7 +1010,8 @@ PAGE_SIZE multiple when read back. limit, anonymous meomry of the cgroup will not be swapped out. -5-2-2. Usage Guidelines +Usage Guidelines +~~~~~~~~~~~~~~~~ "memory.high" is the main mechanism to control memory usage. Over-committing on high limit (sum of high limits > available memory) @@ -1036,7 +1034,8 @@ memory; unfortunately, memory pressure monitoring mechanism isn't implemented yet. -5-2-3. Memory Ownership +Memory Ownership +~~~~~~~~~~~~~~~~ A memory area is charged to the cgroup which instantiated it and stays charged to the cgroup until the area is released. Migrating a process @@ -1054,7 +1053,8 @@ POSIX_FADV_DONTNEED to relinquish the ownership of memory areas belonging to the affected files to ensure correct memory ownership. -5-3. IO +IO +-- The "io" controller regulates the distribution of IO resources. This controller implements both weight based and absolute bandwidth or IOPS @@ -1063,28 +1063,29 @@ only if cfq-iosched is in use and neither scheme is available for blk-mq devices. -5-3-1. IO Interface Files +IO Interface Files +~~~~~~~~~~~~~~~~~~ io.stat - A read-only nested-keyed file which exists on non-root cgroups. Lines are keyed by $MAJ:$MIN device numbers and not ordered. The following nested keys are defined. + ====== =================== rbytes Bytes read wbytes Bytes written rios Number of read IOs wios Number of write IOs + ====== =================== - An example read output follows. + An example read output follows: 8:16 rbytes=1459200 wbytes=314773504 rios=192 wios=353 8:0 rbytes=90430464 wbytes=299008000 rios=8950 wios=1252 io.weight - A read-write flat-keyed file which exists on non-root cgroups. The default is "default 100". @@ -1098,14 +1099,13 @@ blk-mq devices. $WEIGHT" or simply "$WEIGHT". Overrides can be set by writing "$MAJ:$MIN $WEIGHT" and unset by writing "$MAJ:$MIN default". - An example read output follows. + An example read output follows:: default 100 8:16 200 8:0 50 io.max - A read-write nested-keyed file which exists on non-root cgroups. @@ -1113,10 +1113,12 @@ blk-mq devices. device numbers and not ordered. The following nested keys are defined. + ===== ================================== rbps Max read bytes per second wbps Max write bytes per second riops Max read IO operations per second wiops Max write IO operations per second + ===== ================================== When writing, any number of nested key-value pairs can be specified in any order. "max" can be specified as the value @@ -1126,24 +1128,25 @@ blk-mq devices. BPS and IOPS are measured in each IO direction and IOs are delayed if limit is reached. Temporary bursts are allowed. - Setting read limit at 2M BPS and write at 120 IOPS for 8:16. + Setting read limit at 2M BPS and write at 120 IOPS for 8:16:: echo "8:16 rbps=2097152 wiops=120" > io.max - Reading returns the following. + Reading returns the following:: 8:16 rbps=2097152 wbps=max riops=max wiops=120 - Write IOPS limit can be removed by writing the following. + Write IOPS limit can be removed by writing the following:: echo "8:16 wiops=max" > io.max - Reading now returns the following. + Reading now returns the following:: 8:16 rbps=2097152 wbps=max riops=max wiops=max -5-3-2. Writeback +Writeback +~~~~~~~~~ Page cache is dirtied through buffered writes and shared mmaps and written asynchronously to the backing filesystem by the writeback @@ -1191,22 +1194,19 @@ patterns. The sysctl knobs which affect writeback behavior are applied to cgroup writeback as follows. - vm.dirty_background_ratio - vm.dirty_ratio - + vm.dirty_background_ratio, vm.dirty_ratio These ratios apply the same to cgroup writeback with the amount of available memory capped by limits imposed by the memory controller and system-wide clean memory. - vm.dirty_background_bytes - vm.dirty_bytes - + vm.dirty_background_bytes, vm.dirty_bytes For cgroup writeback, this is calculated into ratio against total available memory and applied the same way as vm.dirty[_background]_ratio. -5-4. PID +PID +--- The process number controller is used to allow a cgroup to stop any new tasks from being fork()'d or clone()'d after a specified limit is @@ -1221,17 +1221,16 @@ Note that PIDs used in this controller refer to TIDs, process IDs as used by the kernel. -5-4-1. PID Interface Files +PID Interface Files +~~~~~~~~~~~~~~~~~~~ pids.max - A read-write single value file which exists on non-root cgroups. The default is "max". Hard limit of number of processes. pids.current - A read-only single value file which exists on all cgroups. The number of processes currently in the cgroup and its @@ -1246,12 +1245,14 @@ through fork() or clone(). These will return -EAGAIN if the creation of a new process would cause a cgroup policy to be violated. -5-5. RDMA +RDMA +---- The "rdma" controller regulates the distribution and accounting of of RDMA resources. -5-5-1. RDMA Interface Files +RDMA Interface Files +~~~~~~~~~~~~~~~~~~~~ rdma.max A readwrite nested-keyed file that exists for all the cgroups @@ -1264,10 +1265,12 @@ of RDMA resources. The following nested keys are defined. + ========== ============================= hca_handle Maximum number of HCA Handles hca_object Maximum number of HCA Objects + ========== ============================= - An example for mlx4 and ocrdma device follows. + An example for mlx4 and ocrdma device follows:: mlx4_0 hca_handle=2 hca_object=2000 ocrdma1 hca_handle=3 hca_object=max @@ -1276,15 +1279,17 @@ of RDMA resources. A read-only file that describes current resource usage. It exists for all the cgroup except root. - An example for mlx4 and ocrdma device follows. + An example for mlx4 and ocrdma device follows:: mlx4_0 hca_handle=1 hca_object=20 ocrdma1 hca_handle=1 hca_object=23 -5-6. Misc +Misc +---- -5-6-1. perf_event +perf_event +~~~~~~~~~~ perf_event controller, if not mounted on a legacy hierarchy, is automatically enabled on the v2 hierarchy so that perf events can @@ -1292,9 +1297,11 @@ always be filtered by cgroup v2 path. The controller can still be moved to a legacy hierarchy after v2 hierarchy is populated. -6. Namespace +Namespace +========= -6-1. Basics +Basics +------ cgroup namespace provides a mechanism to virtualize the view of the "/proc/$PID/cgroup" file and cgroup mounts. The CLONE_NEWCGROUP clone @@ -1308,7 +1315,7 @@ Without cgroup namespace, the "/proc/$PID/cgroup" file shows the complete path of the cgroup of a process. In a container setup where a set of cgroups and namespaces are intended to isolate processes the "/proc/$PID/cgroup" file may leak potential system level information -to the isolated processes. For Example: +to the isolated processes. For Example:: # cat /proc/self/cgroup 0::/batchjobs/container_id1 @@ -1316,14 +1323,14 @@ to the isolated processes. For Example: The path '/batchjobs/container_id1' can be considered as system-data and undesirable to expose to the isolated processes. cgroup namespace can be used to restrict visibility of this path. For example, before -creating a cgroup namespace, one would see: +creating a cgroup namespace, one would see:: # ls -l /proc/self/ns/cgroup lrwxrwxrwx 1 root root 0 2014-07-15 10:37 /proc/self/ns/cgroup -> cgroup:[4026531835] # cat /proc/self/cgroup 0::/batchjobs/container_id1 -After unsharing a new namespace, the view changes. +After unsharing a new namespace, the view changes:: # ls -l /proc/self/ns/cgroup lrwxrwxrwx 1 root root 0 2014-07-15 10:35 /proc/self/ns/cgroup -> cgroup:[4026532183] @@ -1341,7 +1348,8 @@ namespace is destroyed. The cgroupns root and the actual cgroups remain. -6-2. The Root and Views +The Root and Views +------------------ The 'cgroupns root' for a cgroup namespace is the cgroup in which the process calling unshare(2) is running. For example, if a process in @@ -1350,7 +1358,7 @@ process calling unshare(2) is running. For example, if a process in init_cgroup_ns, this is the real root ('/') cgroup. The cgroupns root cgroup does not change even if the namespace creator -process later moves to a different cgroup. +process later moves to a different cgroup:: # ~/unshare -c # unshare cgroupns in some cgroup # cat /proc/self/cgroup @@ -1364,7 +1372,7 @@ Each process gets its namespace-specific view of "/proc/$PID/cgroup" Processes running inside the cgroup namespace will be able to see cgroup paths (in /proc/self/cgroup) only inside their root cgroup. -From within an unshared cgroupns: +From within an unshared cgroupns:: # sleep 100000 & [1] 7353 @@ -1373,7 +1381,7 @@ From within an unshared cgroupns: 0::/sub_cgrp_1 From the initial cgroup namespace, the real cgroup path will be -visible: +visible:: $ cat /proc/7353/cgroup 0::/batchjobs/container_id1/sub_cgrp_1 @@ -1381,7 +1389,7 @@ visible: From a sibling cgroup namespace (that is, a namespace rooted at a different cgroup), the cgroup path relative to its own cgroup namespace root will be shown. For instance, if PID 7353's cgroup -namespace root is at '/batchjobs/container_id2', then it will see +namespace root is at '/batchjobs/container_id2', then it will see:: # cat /proc/7353/cgroup 0::/../container_id2/sub_cgrp_1 @@ -1390,13 +1398,14 @@ Note that the relative path always starts with '/' to indicate that its relative to the cgroup namespace root of the caller. -6-3. Migration and setns(2) +Migration and setns(2) +---------------------- Processes inside a cgroup namespace can move into and out of the namespace root if they have proper access to external cgroups. For example, from inside a namespace with cgroupns root at /batchjobs/container_id1, and assuming that the global hierarchy is -still accessible inside cgroupns: +still accessible inside cgroupns:: # cat /proc/7353/cgroup 0::/sub_cgrp_1 @@ -1418,10 +1427,11 @@ namespace. It is expected that the someone moves the attaching process under the target cgroup namespace root. -6-4. Interaction with Other Namespaces +Interaction with Other Namespaces +--------------------------------- Namespace specific cgroup hierarchy can be mounted by a process -running inside a non-init cgroup namespace. +running inside a non-init cgroup namespace:: # mount -t cgroup2 none $MOUNT_POINT @@ -1434,27 +1444,27 @@ the view of cgroup hierarchy by namespace-private cgroupfs mount provides a properly isolated cgroup view inside the container. -P. Information on Kernel Programming +Information on Kernel Programming +================================= This section contains kernel programming information in the areas where interacting with cgroup is necessary. cgroup core and controllers are not covered. -P-1. Filesystem Support for Writeback +Filesystem Support for Writeback +-------------------------------- A filesystem can support cgroup writeback by updating address_space_operations->writepage[s]() to annotate bio's using the following two functions. wbc_init_bio(@wbc, @bio) - Should be called for each bio carrying writeback data and associates the bio with the inode's owner cgroup. Can be called anytime between bio allocation and submission. wbc_account_io(@wbc, @page, @bytes) - Should be called for each data segment being written out. While this function doesn't care exactly when it's called during the writeback session, it's the easiest and most @@ -1475,7 +1485,8 @@ cases by skipping wbc_init_bio() or using bio_associate_blkcg() directly. -D. Deprecated v1 Core Features +Deprecated v1 Core Features +=========================== - Multiple hierarchies including named ones are not supported. @@ -1489,9 +1500,11 @@ D. Deprecated v1 Core Features at the root instead. -R. Issues with v1 and Rationales for v2 +Issues with v1 and Rationales for v2 +==================================== -R-1. Multiple Hierarchies +Multiple Hierarchies +-------------------- cgroup v1 allowed an arbitrary number of hierarchies and each hierarchy could host any number of controllers. While this seemed to @@ -1543,7 +1556,8 @@ how memory is distributed beyond a certain level while still wanting to control how CPU cycles are distributed. -R-2. Thread Granularity +Thread Granularity +------------------ cgroup v1 allowed threads of a process to belong to different cgroups. This didn't make sense for some controllers and those controllers @@ -1586,7 +1600,8 @@ misbehaving and poorly abstracted interfaces and kernel exposing and locked into constructs inadvertently. -R-3. Competition Between Inner Nodes and Threads +Competition Between Inner Nodes and Threads +------------------------------------------- cgroup v1 allowed threads to be in any cgroups which created an interesting problem where threads belonging to a parent cgroup and its @@ -1605,7 +1620,7 @@ simply weren't available for threads. The io controller implicitly created a hidden leaf node for each cgroup to host the threads. The hidden leaf had its own copies of all -the knobs with "leaf_" prefixed. While this allowed equivalent +the knobs with ``leaf_`` prefixed. While this allowed equivalent control over internal threads, it was with serious drawbacks. It always added an extra layer of nesting which wouldn't be necessary otherwise, made the interface messy and significantly complicated the @@ -1626,7 +1641,8 @@ This clearly is a problem which needs to be addressed from cgroup core in a uniform way. -R-4. Other Interface Issues +Other Interface Issues +---------------------- cgroup v1 grew without oversight and developed a large number of idiosyncrasies and inconsistencies. One issue on the cgroup core side @@ -1654,9 +1670,11 @@ cgroup v2 establishes common conventions where appropriate and updates controllers so that they expose minimal and consistent interfaces. -R-5. Controller Issues and Remedies +Controller Issues and Remedies +------------------------------ -R-5-1. Memory +Memory +~~~~~~ The original lower boundary, the soft limit, is defined as a limit that is per default unset. As a result, the set of cgroups that