USB: usbserial: mos7720: cleanup, consolidation, replace send_mos_cmd with {read,write}_mos_reg
No functionality added or bugs fixed, just improved code consistency and (hopefully) readability by replacing send_mos_cmd with the register read & write functions that were used for parallel port registers. Also shortens overall file length. Thoroughly tested, with emphasis on regression testing the serial port. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Mike Dunn
Greg Kroah-Hartman
Родитель
b69578df7e
Коммит
63b917678f
|
|
@ -39,16 +39,13 @@
|
|||
/*
|
||||
* Version Information
|
||||
*/
|
||||
#define DRIVER_VERSION "2.0"
|
||||
#define DRIVER_VERSION "2.1"
|
||||
#define DRIVER_AUTHOR "Aspire Communications pvt Ltd."
|
||||
#define DRIVER_DESC "Moschip USB Serial Driver"
|
||||
|
||||
/* default urb timeout */
|
||||
#define MOS_WDR_TIMEOUT (HZ * 5)
|
||||
|
||||
#define MOS_PORT1 0x0200
|
||||
#define MOS_PORT2 0x0300
|
||||
#define MOS_VENREG 0x0000
|
||||
#define MOS_MAX_PORT 0x02
|
||||
#define MOS_WRITE 0x0E
|
||||
#define MOS_READ 0x0D
|
||||
|
|
@ -126,6 +123,10 @@ struct mos7715_parport {
|
|||
/* lock guards against dereferencing NULL ptr in parport ops callbacks */
|
||||
static DEFINE_SPINLOCK(release_lock);
|
||||
|
||||
#endif /* CONFIG_USB_SERIAL_MOS7715_PARPORT */
|
||||
|
||||
static const unsigned int dummy; /* for clarity in register access fns */
|
||||
|
||||
enum mos_regs {
|
||||
THR, /* serial port regs */
|
||||
RHR,
|
||||
|
|
@ -184,32 +185,35 @@ static inline __u16 get_reg_index(enum mos_regs reg)
|
|||
* Return the correct value for the upper byte of the Wvalue field of
|
||||
* the setup packet for a control endpoint message.
|
||||
*/
|
||||
static inline __u16 get_reg_value(enum mos_regs reg)
|
||||
static inline __u16 get_reg_value(enum mos_regs reg,
|
||||
unsigned int serial_portnum)
|
||||
{
|
||||
if (reg >= SP1_REG) /* control reg */
|
||||
return 0x0000;
|
||||
else /* parallel port reg (7715 only) */
|
||||
|
||||
else if (reg >= DPR) /* parallel port reg (7715 only) */
|
||||
return 0x0100;
|
||||
|
||||
else /* serial port reg */
|
||||
return (serial_portnum + 2) << 8;
|
||||
}
|
||||
|
||||
/*
|
||||
* Write data byte to the specified device register. The data is embedded in
|
||||
* the value field of the setup packet.
|
||||
* the value field of the setup packet. serial_portnum is ignored for registers
|
||||
* not specific to a particular serial port.
|
||||
*/
|
||||
static int write_parport_reg(struct mos7715_parport *mos_parport,
|
||||
enum mos_regs reg, __u8 data)
|
||||
static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
|
||||
enum mos_regs reg, __u8 data)
|
||||
{
|
||||
struct usb_serial *serial = mos_parport->serial;
|
||||
struct usb_device *usbdev = serial->dev;
|
||||
unsigned int pipe = usb_sndctrlpipe(usbdev, 0);
|
||||
__u8 request = (__u8)0x0e;
|
||||
__u8 requesttype = (__u8)0x40;
|
||||
__u16 value = get_reg_value(reg) + data;
|
||||
__u16 index = get_reg_index(reg);
|
||||
__u16 size = 0;
|
||||
int status;
|
||||
status = usb_control_msg(usbdev, pipe, request, requesttype, value,
|
||||
index, NULL, size, MOS_WDR_TIMEOUT);
|
||||
__u16 value = get_reg_value(reg, serial_portnum) + data;
|
||||
int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
|
||||
index, NULL, 0, MOS_WDR_TIMEOUT);
|
||||
if (status < 0)
|
||||
dev_err(&usbdev->dev,
|
||||
"mos7720: usb_control_msg() failed: %d", status);
|
||||
|
|
@ -218,31 +222,33 @@ static int write_parport_reg(struct mos7715_parport *mos_parport,
|
|||
|
||||
/*
|
||||
* Read data byte from the specified device register. The data returned by the
|
||||
* device is embedded in the value field of the setup packet.
|
||||
* device is embedded in the value field of the setup packet. serial_portnum is
|
||||
* ignored for registers that are not specific to a particular serial port.
|
||||
*/
|
||||
static int read_parport_reg(struct mos7715_parport *mos_parport,
|
||||
enum mos_regs reg, __u8 *data)
|
||||
static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
|
||||
enum mos_regs reg, __u8 *data)
|
||||
{
|
||||
struct usb_device *usbdev = mos_parport->serial->dev;
|
||||
struct usb_device *usbdev = serial->dev;
|
||||
unsigned int pipe = usb_rcvctrlpipe(usbdev, 0);
|
||||
__u8 request = (__u8)0x0d;
|
||||
__u8 requesttype = (__u8)0xc0;
|
||||
__u16 value = get_reg_value(reg);
|
||||
__u16 index = get_reg_index(reg);
|
||||
__u16 size = 1;
|
||||
__u16 value = get_reg_value(reg, serial_portnum);
|
||||
int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
|
||||
index, data, size, MOS_WDR_TIMEOUT);
|
||||
index, data, 1, MOS_WDR_TIMEOUT);
|
||||
if (status < 0)
|
||||
dev_err(&usbdev->dev,
|
||||
"mos7720: usb_control_msg() failed: %d", status);
|
||||
return status;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
|
||||
|
||||
static inline int mos7715_change_mode(struct mos7715_parport *mos_parport,
|
||||
enum mos7715_pp_modes mode)
|
||||
{
|
||||
mos_parport->shadowECR = mode;
|
||||
write_parport_reg(mos_parport, ECR, mos_parport->shadowECR);
|
||||
write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -367,7 +373,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
|
|||
}
|
||||
setup.bRequestType = (__u8)0x40;
|
||||
setup.bRequest = (__u8)0x0e;
|
||||
setup.wValue = get_reg_value(reg);
|
||||
setup.wValue = get_reg_value(reg, dummy);
|
||||
setup.wIndex = get_reg_index(reg);
|
||||
setup.wLength = 0;
|
||||
usb_fill_control_urb(urbtrack->urb, usbdev,
|
||||
|
|
@ -474,7 +480,7 @@ static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
|
|||
if (parport_prologue(pp) < 0)
|
||||
return;
|
||||
mos7715_change_mode(mos_parport, SPP);
|
||||
write_parport_reg(mos_parport, DPR, (__u8)d);
|
||||
write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d);
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
||||
|
|
@ -485,7 +491,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp)
|
|||
dbg("%s called", __func__);
|
||||
if (parport_prologue(pp) < 0)
|
||||
return 0;
|
||||
read_parport_reg(mos_parport, DPR, &d);
|
||||
read_mos_reg(mos_parport->serial, dummy, DPR, &d);
|
||||
parport_epilogue(pp);
|
||||
return d;
|
||||
}
|
||||
|
|
@ -498,7 +504,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
|
|||
if (parport_prologue(pp) < 0)
|
||||
return;
|
||||
data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
|
||||
write_parport_reg(mos_parport, DCR, data);
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, data);
|
||||
mos_parport->shadowDCR = data;
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
|
@ -531,7 +537,7 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp,
|
|||
if (parport_prologue(pp) < 0)
|
||||
return 0;
|
||||
mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
|
||||
write_parport_reg(mos_parport, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
dcr = mos_parport->shadowDCR & 0x0f;
|
||||
parport_epilogue(pp);
|
||||
return dcr;
|
||||
|
|
@ -570,7 +576,7 @@ static void parport_mos7715_data_forward(struct parport *pp)
|
|||
return;
|
||||
mos7715_change_mode(mos_parport, PS2);
|
||||
mos_parport->shadowDCR &= ~0x20;
|
||||
write_parport_reg(mos_parport, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
||||
|
|
@ -582,7 +588,7 @@ static void parport_mos7715_data_reverse(struct parport *pp)
|
|||
return;
|
||||
mos7715_change_mode(mos_parport, PS2);
|
||||
mos_parport->shadowDCR |= 0x20;
|
||||
write_parport_reg(mos_parport, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
||||
|
|
@ -705,14 +711,14 @@ static int mos7715_parport_init(struct usb_serial *serial)
|
|||
init_completion(&mos_parport->syncmsg_compl);
|
||||
|
||||
/* cycle parallel port reset bit */
|
||||
write_parport_reg(mos_parport, PP_REG, (__u8)0x80);
|
||||
write_parport_reg(mos_parport, PP_REG, (__u8)0x00);
|
||||
write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80);
|
||||
write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00);
|
||||
|
||||
/* initialize device registers */
|
||||
mos_parport->shadowDCR = DCR_INIT_VAL;
|
||||
write_parport_reg(mos_parport, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
mos_parport->shadowECR = ECR_INIT_VAL;
|
||||
write_parport_reg(mos_parport, ECR, mos_parport->shadowECR);
|
||||
write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
|
||||
|
||||
/* register with parport core */
|
||||
mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE,
|
||||
|
|
@ -754,7 +760,6 @@ static void mos7720_interrupt_callback(struct urb *urb)
|
|||
case -ECONNRESET:
|
||||
case -ENOENT:
|
||||
case -ESHUTDOWN:
|
||||
case -ENODEV:
|
||||
/* this urb is terminated, clean up */
|
||||
dbg("%s - urb shutting down with status: %d", __func__,
|
||||
status);
|
||||
|
|
@ -980,56 +985,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
|
|||
tty_kref_put(tty);
|
||||
}
|
||||
|
||||
/*
|
||||
* send_mos_cmd
|
||||
* this function will be used for sending command to device
|
||||
*/
|
||||
static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
|
||||
__u16 index, u8 *data)
|
||||
{
|
||||
int status;
|
||||
u8 *buf;
|
||||
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
|
||||
|
||||
if (value < MOS_MAX_PORT) {
|
||||
if (product == MOSCHIP_DEVICE_ID_7715)
|
||||
value = 0x0200; /* identifies the 7715's serial port */
|
||||
else
|
||||
value = value*0x100+0x200;
|
||||
} else {
|
||||
value = 0x0000;
|
||||
if ((product == MOSCHIP_DEVICE_ID_7715) &&
|
||||
(index != 0x08)) {
|
||||
dbg("serial->product== MOSCHIP_DEVICE_ID_7715");
|
||||
/* index = 0x01 ; */
|
||||
}
|
||||
}
|
||||
|
||||
if (request == MOS_WRITE) {
|
||||
value = value + *data;
|
||||
status = usb_control_msg(serial->dev,
|
||||
usb_sndctrlpipe(serial->dev, 0), MOS_WRITE,
|
||||
0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT);
|
||||
} else {
|
||||
buf = kmalloc(1, GFP_KERNEL);
|
||||
if (!buf) {
|
||||
status = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
status = usb_control_msg(serial->dev,
|
||||
usb_rcvctrlpipe(serial->dev, 0), MOS_READ,
|
||||
0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT);
|
||||
*data = *buf;
|
||||
kfree(buf);
|
||||
}
|
||||
out:
|
||||
if (status < 0)
|
||||
dbg("Command Write failed Value %x index %x", value, index);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* mos77xx_probe
|
||||
* this function installs the appropriate read interrupt endpoint callback
|
||||
|
|
@ -1066,7 +1021,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
|
|||
struct moschip_port *mos7720_port;
|
||||
int response;
|
||||
int port_number;
|
||||
char data;
|
||||
__u8 data;
|
||||
int allocated_urbs = 0;
|
||||
int j;
|
||||
|
||||
|
|
@ -1122,65 +1077,35 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
|
|||
* 0x08 : SP1/2 Control Reg
|
||||
*/
|
||||
port_number = port->number - port->serial->minor;
|
||||
send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
|
||||
read_mos_reg(serial, port_number, LSR, &data);
|
||||
|
||||
dbg("SS::%p LSR:%x", mos7720_port, data);
|
||||
|
||||
dbg("Check:Sending Command ..........");
|
||||
|
||||
data = 0x02;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x01, &data);
|
||||
data = 0x02;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x02, &data);
|
||||
write_mos_reg(serial, dummy, SP1_REG, 0x02);
|
||||
write_mos_reg(serial, dummy, SP2_REG, 0x02);
|
||||
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0x00);
|
||||
|
||||
data = 0xCF;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
|
||||
data = 0x03;
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
|
||||
data = 0x0b;
|
||||
mos7720_port->shadowMCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
data = 0x0b;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
|
||||
|
||||
/* data = 0x00;
|
||||
send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, port_number + 1, &data);
|
||||
data = 0x03;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
|
||||
data = 0x00;
|
||||
send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT,
|
||||
port_number + 1, &data);
|
||||
*/
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
|
||||
write_mos_reg(serial, port_number, FCR, 0xcf);
|
||||
mos7720_port->shadowLCR = 0x03;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
mos7720_port->shadowMCR = 0x0b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
|
||||
write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
|
||||
read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
|
||||
data = data | (port->number - port->serial->minor + 1);
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
|
||||
|
||||
data = 0x83;
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
|
||||
data = 0x0c;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
|
||||
data = 0x03;
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
|
||||
data = 0x0c;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
|
||||
data = 0x0c;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
|
||||
mos7720_port->shadowLCR = 0x83;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, THR, 0x0c);
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
mos7720_port->shadowLCR = 0x03;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, IER, 0x0c);
|
||||
|
||||
response = usb_submit_urb(port->read_urb, GFP_KERNEL);
|
||||
if (response)
|
||||
|
|
@ -1236,7 +1161,6 @@ static void mos7720_close(struct usb_serial_port *port)
|
|||
{
|
||||
struct usb_serial *serial;
|
||||
struct moschip_port *mos7720_port;
|
||||
char data;
|
||||
int j;
|
||||
|
||||
dbg("mos7720_close:entering...");
|
||||
|
|
@ -1269,13 +1193,10 @@ static void mos7720_close(struct usb_serial_port *port)
|
|||
/* these commands must not be issued if the device has
|
||||
* been disconnected */
|
||||
if (!serial->disconnected) {
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE,
|
||||
port->number - port->serial->minor, 0x04, &data);
|
||||
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE,
|
||||
port->number - port->serial->minor, 0x01, &data);
|
||||
write_mos_reg(serial, port->number - port->serial->minor,
|
||||
MCR, 0x00);
|
||||
write_mos_reg(serial, port->number - port->serial->minor,
|
||||
IER, 0x00);
|
||||
}
|
||||
mutex_unlock(&serial->disc_mutex);
|
||||
mos7720_port->open = 0;
|
||||
|
|
@ -1304,8 +1225,8 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
|
|||
data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
|
||||
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
|
||||
0x03, &data);
|
||||
write_mos_reg(serial, port->number - port->serial->minor,
|
||||
LCR, mos7720_port->shadowLCR);
|
||||
|
||||
return;
|
||||
}
|
||||
|
|
@ -1450,9 +1371,8 @@ static void mos7720_throttle(struct tty_struct *tty)
|
|||
/* if we are implementing RTS/CTS, toggle that line */
|
||||
if (tty->termios->c_cflag & CRTSCTS) {
|
||||
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
|
||||
status = send_mos_cmd(port->serial, MOS_WRITE,
|
||||
port->number - port->serial->minor,
|
||||
UART_MCR, &mos7720_port->shadowMCR);
|
||||
write_mos_reg(port->serial, port->number - port->serial->minor,
|
||||
MCR, mos7720_port->shadowMCR);
|
||||
if (status != 0)
|
||||
return;
|
||||
}
|
||||
|
|
@ -1485,9 +1405,8 @@ static void mos7720_unthrottle(struct tty_struct *tty)
|
|||
/* if we are implementing RTS/CTS, toggle that line */
|
||||
if (tty->termios->c_cflag & CRTSCTS) {
|
||||
mos7720_port->shadowMCR |= UART_MCR_RTS;
|
||||
status = send_mos_cmd(port->serial, MOS_WRITE,
|
||||
port->number - port->serial->minor,
|
||||
UART_MCR, &mos7720_port->shadowMCR);
|
||||
write_mos_reg(port->serial, port->number - port->serial->minor,
|
||||
MCR, mos7720_port->shadowMCR);
|
||||
if (status != 0)
|
||||
return;
|
||||
}
|
||||
|
|
@ -1497,11 +1416,10 @@ static void mos7720_unthrottle(struct tty_struct *tty)
|
|||
static int set_higher_rates(struct moschip_port *mos7720_port,
|
||||
unsigned int baud)
|
||||
{
|
||||
unsigned char data;
|
||||
struct usb_serial_port *port;
|
||||
struct usb_serial *serial;
|
||||
int port_number;
|
||||
|
||||
enum mos_regs sp_reg;
|
||||
if (mos7720_port == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
|
|
@ -1514,59 +1432,35 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
|
|||
dbg("Sending Setting Commands ..........");
|
||||
port_number = port->number - port->serial->minor;
|
||||
|
||||
data = 0x000;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
|
||||
data = 0x000;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
|
||||
data = 0x0CF;
|
||||
send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data);
|
||||
data = 0x00b;
|
||||
mos7720_port->shadowMCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
data = 0x00b;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
|
||||
data = 0x000;
|
||||
send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
|
||||
data = 0x000;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
|
||||
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0xcf);
|
||||
mos7720_port->shadowMCR = 0x0b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00);
|
||||
|
||||
/***********************************************
|
||||
* Set for higher rates *
|
||||
***********************************************/
|
||||
|
||||
/* writing baud rate verbatum into uart clock field clearly not right */
|
||||
data = baud * 0x10;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
|
||||
|
||||
data = 0x003;
|
||||
send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
|
||||
data = 0x003;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
|
||||
|
||||
data = 0x02b;
|
||||
mos7720_port->shadowMCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
data = 0x02b;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
if (port_number == 0)
|
||||
sp_reg = SP1_REG;
|
||||
else
|
||||
sp_reg = SP2_REG;
|
||||
write_mos_reg(serial, dummy, sp_reg, baud * 0x10);
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03);
|
||||
mos7720_port->shadowMCR = 0x2b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
|
||||
/***********************************************
|
||||
* Set DLL/DLM
|
||||
***********************************************/
|
||||
|
||||
data = mos7720_port->shadowLCR | UART_LCR_DLAB;
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
|
||||
|
||||
data = 0x001; /* DLL */
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
|
||||
data = 0x000; /* DLM */
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
|
||||
|
||||
data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, DLL, 0x01);
|
||||
write_mos_reg(serial, port_number, DLM, 0x00);
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1654,7 +1548,6 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
|
|||
struct usb_serial *serial;
|
||||
int divisor;
|
||||
int status;
|
||||
unsigned char data;
|
||||
unsigned char number;
|
||||
|
||||
if (mos7720_port == NULL)
|
||||
|
|
@ -1676,21 +1569,16 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
|
|||
}
|
||||
|
||||
/* Enable access to divisor latch */
|
||||
data = mos7720_port->shadowLCR | UART_LCR_DLAB;
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
|
||||
write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
|
||||
|
||||
/* Write the divisor */
|
||||
data = ((unsigned char)(divisor & 0xff));
|
||||
send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
|
||||
|
||||
data = ((unsigned char)((divisor & 0xff00) >> 8));
|
||||
send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
|
||||
write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff));
|
||||
write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8));
|
||||
|
||||
/* Disable access to divisor latch */
|
||||
data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
|
||||
mos7720_port->shadowLCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
|
||||
write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
|
@ -1715,7 +1603,6 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
__u8 lStop;
|
||||
int status;
|
||||
int port_number;
|
||||
char data;
|
||||
|
||||
if (mos7720_port == NULL)
|
||||
return ;
|
||||
|
|
@ -1794,30 +1681,19 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
|
||||
/* Update the LCR with the correct value */
|
||||
mos7720_port->shadowLCR &=
|
||||
~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
|
||||
~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
|
||||
mos7720_port->shadowLCR |= (lData | lParity | lStop);
|
||||
|
||||
|
||||
/* Disable Interrupts */
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
|
||||
UART_IER, &data);
|
||||
|
||||
data = 0x00;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
|
||||
|
||||
data = 0xcf;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0xcf);
|
||||
|
||||
/* Send the updated LCR value to the mos7720 */
|
||||
data = mos7720_port->shadowLCR;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
|
||||
|
||||
data = 0x00b;
|
||||
mos7720_port->shadowMCR = data;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
data = 0x00b;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
mos7720_port->shadowMCR = 0x0b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
|
||||
/* set up the MCR register and send it to the mos7720 */
|
||||
mos7720_port->shadowMCR = UART_MCR_OUT2;
|
||||
|
|
@ -1828,21 +1704,15 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
|
||||
/* To set hardware flow control to the specified *
|
||||
* serial port, in SP1/2_CONTROL_REG */
|
||||
if (port->number) {
|
||||
data = 0x001;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
|
||||
0x08, &data);
|
||||
} else {
|
||||
data = 0x002;
|
||||
send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
|
||||
0x08, &data);
|
||||
}
|
||||
} else {
|
||||
mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
|
||||
}
|
||||
if (port->number)
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
|
||||
else
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
|
||||
|
||||
data = mos7720_port->shadowMCR;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, UART_MCR, &data);
|
||||
} else
|
||||
mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
|
||||
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
|
||||
/* Determine divisor based on baud rate */
|
||||
baud = tty_get_baud_rate(tty);
|
||||
|
|
@ -1855,8 +1725,7 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
if (baud >= 230400) {
|
||||
set_higher_rates(mos7720_port, baud);
|
||||
/* Enable Interrupts */
|
||||
data = 0x0c;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
|
||||
write_mos_reg(serial, port_number, IER, 0x0c);
|
||||
return;
|
||||
}
|
||||
|
||||
|
|
@ -1867,8 +1736,7 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
if (cflag & CBAUD)
|
||||
tty_encode_baud_rate(tty, baud, baud);
|
||||
/* Enable Interrupts */
|
||||
data = 0x0c;
|
||||
send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
|
||||
write_mos_reg(serial, port_number, IER, 0x0c);
|
||||
|
||||
if (port->read_urb->status != -EINPROGRESS) {
|
||||
port->read_urb->dev = serial->dev;
|
||||
|
|
@ -1959,8 +1827,7 @@ static int get_lsr_info(struct tty_struct *tty,
|
|||
|
||||
count = mos7720_chars_in_buffer(tty);
|
||||
if (count == 0) {
|
||||
send_mos_cmd(port->serial, MOS_READ, port_number,
|
||||
UART_LSR, &data);
|
||||
read_mos_reg(port->serial, port_number, LSR, &data);
|
||||
if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
|
||||
== (UART_LSR_TEMT | UART_LSR_THRE)) {
|
||||
dbg("%s -- Empty", __func__);
|
||||
|
|
@ -1998,13 +1865,11 @@ static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
|
|||
}
|
||||
|
||||
static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
|
||||
unsigned int set, unsigned int clear)
|
||||
unsigned int set, unsigned int clear)
|
||||
{
|
||||
struct usb_serial_port *port = tty->driver_data;
|
||||
struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
|
||||
unsigned int mcr ;
|
||||
unsigned char lmcr;
|
||||
|
||||
dbg("%s - port %d", __func__, port->number);
|
||||
dbg("he was at tiocmget");
|
||||
|
||||
|
|
@ -2025,10 +1890,8 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
|
|||
mcr &= ~UART_MCR_LOOP;
|
||||
|
||||
mos7720_port->shadowMCR = mcr;
|
||||
lmcr = mos7720_port->shadowMCR;
|
||||
|
||||
send_mos_cmd(port->serial, MOS_WRITE,
|
||||
port->number - port->serial->minor, UART_MCR, &lmcr);
|
||||
write_mos_reg(port->serial, port->number - port->serial->minor,
|
||||
MCR, mos7720_port->shadowMCR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -2038,7 +1901,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
|
|||
{
|
||||
unsigned int mcr ;
|
||||
unsigned int arg;
|
||||
unsigned char data;
|
||||
|
||||
struct usb_serial_port *port;
|
||||
|
||||
|
|
@ -2073,10 +1935,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
|
|||
}
|
||||
|
||||
mos7720_port->shadowMCR = mcr;
|
||||
|
||||
data = mos7720_port->shadowMCR;
|
||||
send_mos_cmd(port->serial, MOS_WRITE,
|
||||
port->number - port->serial->minor, UART_MCR, &data);
|
||||
write_mos_reg(port->serial, port->number - port->serial->minor,
|
||||
MCR, mos7720_port->shadowMCR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -2269,11 +2129,7 @@ static int mos7720_startup(struct usb_serial *serial)
|
|||
}
|
||||
#endif
|
||||
/* LSR For Port 1 */
|
||||
send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data);
|
||||
dbg("LSR:%x", data);
|
||||
|
||||
/* LSR For Port 2 */
|
||||
send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data);
|
||||
read_mos_reg(serial, 0, LSR, &data);
|
||||
dbg("LSR:%x", data);
|
||||
|
||||
return 0;
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче