pwm: vt8500: Update vt8500 PWM driver support
This patch updates pwm-vt8500.c to support devicetree probing and make use of the common clock subsystem. A binding document describing the PWM controller found on arch-vt8500 is also included. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
This commit is contained in:
Родитель
8f0d8163b5
Коммит
63e1ed2364
|
@ -0,0 +1,17 @@
|
|||
VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "via,vt8500-pwm"
|
||||
- reg: physical base address and length of the controller's registers
|
||||
- #pwm-cells: should be 2. The first cell specifies the per-chip index
|
||||
of the PWM to use and the second cell is the period in nanoseconds.
|
||||
- clocks: phandle to the PWM source clock
|
||||
|
||||
Example:
|
||||
|
||||
pwm1: pwm@d8220000 {
|
||||
#pwm-cells = <2>;
|
||||
compatible = "via,vt8500-pwm";
|
||||
reg = <0xd8220000 0x1000>;
|
||||
clocks = <&clkpwm>;
|
||||
};
|
|
@ -1,7 +1,8 @@
|
|||
/*
|
||||
* drivers/pwm/pwm-vt8500.c
|
||||
*
|
||||
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
|
||||
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
|
||||
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
|
||||
*
|
||||
* This software is licensed under the terms of the GNU General Public
|
||||
* License version 2, as published by the Free Software Foundation, and
|
||||
|
@ -21,14 +22,24 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/clk.h>
|
||||
|
||||
#include <asm/div64.h>
|
||||
|
||||
#define VT8500_NR_PWMS 4
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_address.h>
|
||||
|
||||
/*
|
||||
* SoC architecture allocates register space for 4 PWMs but only
|
||||
* 2 are currently implemented.
|
||||
*/
|
||||
#define VT8500_NR_PWMS 2
|
||||
|
||||
struct vt8500_chip {
|
||||
struct pwm_chip chip;
|
||||
void __iomem *base;
|
||||
struct clk *clk;
|
||||
};
|
||||
|
||||
#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip)
|
||||
|
@ -52,7 +63,7 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|||
unsigned long long c;
|
||||
unsigned long period_cycles, prescale, pv, dc;
|
||||
|
||||
c = 25000000/2; /* wild guess --- need to implement clocks */
|
||||
c = clk_get_rate(vt8500->clk);
|
||||
c = c * period_ns;
|
||||
do_div(c, 1000000000);
|
||||
period_cycles = c;
|
||||
|
@ -85,8 +96,15 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|||
|
||||
static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
int err;
|
||||
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
|
||||
|
||||
err = clk_enable(vt8500->clk);
|
||||
if (err < 0)
|
||||
dev_err(chip->dev, "failed to enable clock\n");
|
||||
return err;
|
||||
};
|
||||
|
||||
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
|
||||
writel(5, vt8500->base + (pwm->hwpwm << 4));
|
||||
return 0;
|
||||
|
@ -98,6 +116,8 @@ static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|||
|
||||
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
|
||||
writel(0, vt8500->base + (pwm->hwpwm << 4));
|
||||
|
||||
clk_disable(vt8500->clk);
|
||||
}
|
||||
|
||||
static struct pwm_ops vt8500_pwm_ops = {
|
||||
|
@ -107,12 +127,24 @@ static struct pwm_ops vt8500_pwm_ops = {
|
|||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int __devinit pwm_probe(struct platform_device *pdev)
|
||||
static const struct of_device_id vt8500_pwm_dt_ids[] = {
|
||||
{ .compatible = "via,vt8500-pwm", },
|
||||
{ /* Sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
|
||||
|
||||
static int vt8500_pwm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct vt8500_chip *chip;
|
||||
struct resource *r;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
int ret;
|
||||
|
||||
if (!np) {
|
||||
dev_err(&pdev->dev, "invalid devicetree node\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
|
||||
if (chip == NULL) {
|
||||
dev_err(&pdev->dev, "failed to allocate memory\n");
|
||||
|
@ -124,6 +156,12 @@ static int __devinit pwm_probe(struct platform_device *pdev)
|
|||
chip->chip.base = -1;
|
||||
chip->chip.npwm = VT8500_NR_PWMS;
|
||||
|
||||
chip->clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(chip->clk)) {
|
||||
dev_err(&pdev->dev, "clock source not specified\n");
|
||||
return PTR_ERR(chip->clk);
|
||||
}
|
||||
|
||||
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (r == NULL) {
|
||||
dev_err(&pdev->dev, "no memory resource defined\n");
|
||||
|
@ -131,18 +169,26 @@ static int __devinit pwm_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
chip->base = devm_request_and_ioremap(&pdev->dev, r);
|
||||
if (chip->base == NULL)
|
||||
if (!chip->base)
|
||||
return -EADDRNOTAVAIL;
|
||||
|
||||
ret = pwmchip_add(&chip->chip);
|
||||
if (ret < 0)
|
||||
ret = clk_prepare(chip->clk);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "failed to prepare clock\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = pwmchip_add(&chip->chip);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "failed to add PWM chip\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, chip);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit pwm_remove(struct platform_device *pdev)
|
||||
static int vt8500_pwm_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct vt8500_chip *chip;
|
||||
|
||||
|
@ -150,28 +196,22 @@ static int __devexit pwm_remove(struct platform_device *pdev)
|
|||
if (chip == NULL)
|
||||
return -ENODEV;
|
||||
|
||||
clk_unprepare(chip->clk);
|
||||
|
||||
return pwmchip_remove(&chip->chip);
|
||||
}
|
||||
|
||||
static struct platform_driver pwm_driver = {
|
||||
static struct platform_driver vt8500_pwm_driver = {
|
||||
.probe = vt8500_pwm_probe,
|
||||
.remove = vt8500_pwm_remove,
|
||||
.driver = {
|
||||
.name = "vt8500-pwm",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = vt8500_pwm_dt_ids,
|
||||
},
|
||||
.probe = pwm_probe,
|
||||
.remove = __devexit_p(pwm_remove),
|
||||
};
|
||||
module_platform_driver(vt8500_pwm_driver);
|
||||
|
||||
static int __init pwm_init(void)
|
||||
{
|
||||
return platform_driver_register(&pwm_driver);
|
||||
}
|
||||
arch_initcall(pwm_init);
|
||||
|
||||
static void __exit pwm_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&pwm_driver);
|
||||
}
|
||||
module_exit(pwm_exit);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DESCRIPTION("VT8500 PWM Driver");
|
||||
MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
Загрузка…
Ссылка в новой задаче