media: si2157: Fix "warm" tuner state detection

[ Upstream commit a6441ea29c ]

Commit e955f959ac ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:

[  312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  312.264334] si2157 16-0060: firmware version: 3.0.5
[  342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  342.295743] si2157 16-0060: firmware version: 3.0.5
[  372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  372.385035] si2157 16-0060: firmware version: 3.0.5

Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.

Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.

Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03

Fixes: e955f959ac ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/media/tuners/si2157.c

@@ -90,7 +90,7 @@ static int si2157_init(struct dvb_frontend *fe)
 	dev_dbg(&client->dev, "\n");
 
 	/* Try to get Xtal trim property, to verify tuner still running */
-	memcpy(cmd.args, "\x15\x00\x04\x02", 4);
+	memcpy(cmd.args, "\x15\x00\x02\x04", 4);
 	cmd.wlen = 4;
 	cmd.rlen = 4;
 	ret = si2157_cmd_execute(client, &cmd);