rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: Fix low-gain setting when scanning

In https://bugzilla.redhat.com/show_bug.cgi?id=770207, slowdowns of driver
rtl8192ce are reported. One fix (commit a9b89e2) has already been applied,
and it helped, but the maximum RX speed would still drop to 1 Mbps. As in
the previous fix, the initial gain was determined to be the problem; however,
the problem arises from a setting of the gain when scans are started.

Driver rtl8192de also has the same code structure - this one is fixed as well.

Reported-and-Tested-by: Ivan Pesin <ivan.pesin@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c

@@ -1893,7 +1893,7 @@ void rtl92c_phy_set_io(struct ieee80211_hw *hw)
 		break;
 	case IO_CMD_PAUSE_DM_BY_SCAN:
 		rtlphy->initgain_backup.xaagccore1 = dm_digtable.cur_igvalue;
-		dm_digtable.cur_igvalue = 0x17;
+		dm_digtable.cur_igvalue = 0x37;
 		rtl92c_dm_write_dig(hw);
 		break;
 	default:

drivers/net/wireless/rtlwifi/rtl8192de/phy.c

@@ -3077,7 +3077,7 @@ static void rtl92d_phy_set_io(struct ieee80211_hw *hw)
 		break;
 	case IO_CMD_PAUSE_DM_BY_SCAN:
 		rtlphy->initgain_backup.xaagccore1 = de_digtable.cur_igvalue;
-		de_digtable.cur_igvalue = 0x17;
+		de_digtable.cur_igvalue = 0x37;
 		rtl92d_dm_write_dig(hw);
 		break;
 	default: