Merge branch 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt

From Lee Jones <lee.jones@linaro.org>:

* 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500:
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default

This follows up on the previous ux500 DT changes. Most importantly, it
resolves a build error in the dts files that was the result of referring
to a board specific device node from the common dtsi file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/Makefile

@@ -94,7 +94,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-bone.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
+	hrefprev60.dtb \
+	hrefv60plus.dtb \
+	ccu9540.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	r8a7740-armadillo800eva.dtb \
 	sh73a0-kzm9g.dtb

arch/arm/boot/dts/dbx5x0.dtsi

@@ -638,10 +638,10 @@
 			regulator-name = "mmci-reg";
 			regulator-type = "voltage";
 
-			gpios = <&tc3589x_gpio 18 0x4>;
-			gpio-enable = <&tc3589x_gpio 17 0x4>;
 			states = <1800000 0x1
 				  2900000 0x0>;
+
+			status = "disabled";
 		};
 	};
 };

arch/arm/boot/dts/hrefprev60.dts

@@ -37,5 +37,12 @@
 				reset-gpio = <&tc3589x_gpio 13 0x4>;
 			};
 		};
+
+		vmmci: regulator-gpio {
+			gpios = <&tc3589x_gpio 18 0x4>;
+			gpio-enable = <&tc3589x_gpio 17 0x4>;
+
+			status = "okay";
+		};
 	};
 };

arch/arm/mach-ux500/board-mop500-audio.c

@@ -150,15 +150,6 @@ static struct platform_device snd_soc_mop500 = {
 	},
 };
 
-/* Platform device for Ux500-PCM */
-static struct platform_device ux500_pcm = {
-		.name = "ux500-pcm",
-		.id = 0,
-		.dev = {
-			.platform_data = NULL,
-		},
-};
-
 struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
@@ -186,10 +177,3 @@ void mop500_audio_init(struct device *parent)
 	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
 			   &msp3_platform_data);
 }
-
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_audio_init(struct device *parent)
-{
-	pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
-	platform_device_register(&ux500_pcm);
-}

arch/arm/mach-ux500/board-mop500.h

@@ -104,8 +104,6 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_audio_init(struct device *parent);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,

arch/arm/mach-ux500/cpu-db8500.c

@@ -222,7 +222,7 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_data(parent,
-		"cpufreq-u8500", -1, NULL, 0);
+		"cpufreq-ux500", -1, NULL, 0);
 
 	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
 		platform_devs[i]->dev.parent = parent;
@@ -244,7 +244,7 @@ static struct device * __init u8500_of_init_devices(void)
 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_data(parent,
-		"cpufreq-u8500", -1, NULL, 0);
+		"cpufreq-ux500", -1, NULL, 0);
 
 	u8500_dma40_device.dev.parent = parent;