Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/hwmon-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/hwmon-2.6: hwmon: Fix debug messages in w83781d hwmon: Let w83781d and lm78 load again w83627ehf: Fix the detection of fan5 k8temp: Documentation update smsc47m1: List the SMSC LPC47M112 as supported hwmon: Fix documentation typos adm9240: Update Grant Coady's email address w83791d: Fix unchecked return status
This commit is contained in:
Linus Torvalds
Коммит
64d9a39ec9
|
|
@ -24,7 +24,7 @@ Authors:
|
|||
Frodo Looijaard <frodol@dds.nl>,
|
||||
Philip Edelbrock <phil@netroedge.com>,
|
||||
Michiel Rook <michiel@grendelproject.nl>,
|
||||
Grant Coady <gcoady@gmail.com> with guidance
|
||||
Grant Coady <gcoady.lk@gmail.com> with guidance
|
||||
from Jean Delvare <khali@linux-fr.org>
|
||||
|
||||
Interface
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ Thanks to Kris Chen from Fintek for answering technical questions and
|
|||
providing additional documentation.
|
||||
|
||||
Thanks to Chris Lin from Jetway for providing wiring schematics and
|
||||
anwsering technical questions.
|
||||
answering technical questions.
|
||||
|
||||
|
||||
Description
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ Kernel driver k8temp
|
|||
====================
|
||||
|
||||
Supported chips:
|
||||
* AMD K8 CPU
|
||||
* AMD Athlon64/FX or Opteron CPUs
|
||||
Prefix: 'k8temp'
|
||||
Addresses scanned: PCI space
|
||||
Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
|
||||
|
|
@ -13,10 +13,13 @@ Contact: Rudolf Marek <r.marek@sh.cvut.cz>
|
|||
Description
|
||||
-----------
|
||||
|
||||
This driver permits reading temperature sensor(s) embedded inside AMD K8 CPUs.
|
||||
Official documentation says that it works from revision F of K8 core, but
|
||||
in fact it seems to be implemented for all revisions of K8 except the first
|
||||
two revisions (SH-B0 and SH-B3).
|
||||
This driver permits reading temperature sensor(s) embedded inside AMD K8
|
||||
family CPUs (Athlon64/FX, Opteron). Official documentation says that it works
|
||||
from revision F of K8 core, but in fact it seems to be implemented for all
|
||||
revisions of K8 except the first two revisions (SH-B0 and SH-B3).
|
||||
|
||||
Please note that you will need at least lm-sensors 2.10.1 for proper userspace
|
||||
support.
|
||||
|
||||
There can be up to four temperature sensors inside single CPU. The driver
|
||||
will auto-detect the sensors and will display only temperatures from
|
||||
|
|
|
|||
|
|
@ -2,12 +2,14 @@ Kernel driver smsc47m1
|
|||
======================
|
||||
|
||||
Supported chips:
|
||||
* SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192
|
||||
* SMSC LPC47B27x, LPC47M112, LPC47M10x, LPC47M13x, LPC47M14x,
|
||||
LPC47M15x and LPC47M192
|
||||
Addresses scanned: none, address read from Super I/O config space
|
||||
Prefix: 'smsc47m1'
|
||||
Datasheets:
|
||||
http://www.smsc.com/main/datasheets/47b27x.pdf
|
||||
http://www.smsc.com/main/datasheets/47m10x.pdf
|
||||
http://www.smsc.com/main/datasheets/47m112.pdf
|
||||
http://www.smsc.com/main/tools/discontinued/47m13x.pdf
|
||||
http://www.smsc.com/main/datasheets/47m14x.pdf
|
||||
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
|
||||
|
|
|
|||
|
|
@ -26,7 +26,7 @@ fan control mode).
|
|||
Temperatures are measured in degrees Celsius and measurement resolution is 1
|
||||
degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
|
||||
the temperature gets higher than high limit; it stays on until the temperature
|
||||
falls below the Hysteresis value.
|
||||
falls below the hysteresis value.
|
||||
|
||||
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
|
||||
triggered if the rotation speed has dropped below a programmable limit. Fan
|
||||
|
|
@ -67,9 +67,9 @@ Thermal Cruise mode
|
|||
|
||||
If the temperature is in the range defined by:
|
||||
|
||||
pwm[1-4]_target - set target temperature, unit millidegree Celcius
|
||||
pwm[1-4]_target - set target temperature, unit millidegree Celsius
|
||||
(range 0 - 127000)
|
||||
pwm[1-4]_tolerance - tolerance, unit millidegree Celcius (range 0 - 15000)
|
||||
pwm[1-4]_tolerance - tolerance, unit millidegree Celsius (range 0 - 15000)
|
||||
|
||||
there are no changes to fan speed. Once the temperature leaves the interval,
|
||||
fan speed increases (temp is higher) or decreases if lower than desired.
|
||||
|
|
|
|||
|
|
@ -1668,6 +1668,12 @@ M: sct@redhat.com, akpm@osdl.org
|
|||
L: ext2-devel@lists.sourceforge.net
|
||||
S: Maintained
|
||||
|
||||
K8TEMP HARDWARE MONITORING DRIVER
|
||||
P: Rudolf Marek
|
||||
M: r.marek@assembler.cz
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
|
||||
KCONFIG
|
||||
P: Roman Zippel
|
||||
M: zippel@linux-m68k.org
|
||||
|
|
|
|||
|
|
@ -95,11 +95,13 @@ config SENSORS_ADM9240
|
|||
will be called adm9240.
|
||||
|
||||
config SENSORS_K8TEMP
|
||||
tristate "AMD K8 processor sensor"
|
||||
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
||||
depends on HWMON && X86 && PCI && EXPERIMENTAL
|
||||
help
|
||||
If you say yes here you get support for the temperature
|
||||
sensor(s) inside your AMD K8 CPU.
|
||||
sensor(s) inside your CPU. Supported is whole AMD K8
|
||||
microarchitecture. Please note that you will need at least
|
||||
lm-sensors 2.10.1 for proper userspace support.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called k8temp.
|
||||
|
|
@ -369,8 +371,8 @@ config SENSORS_SMSC47M1
|
|||
help
|
||||
If you say yes here you get support for the integrated fan
|
||||
monitoring and control capabilities of the SMSC LPC47B27x,
|
||||
LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and
|
||||
LPC47M997 chips.
|
||||
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
|
||||
LPC47M192 and LPC47M997 chips.
|
||||
|
||||
The temperature and voltage sensor features of the LPC47M192
|
||||
and LPC47M997 are supported by another driver, select also
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
* Copyright (C) 1999 Frodo Looijaard <frodol@dds.nl>
|
||||
* Philip Edelbrock <phil@netroedge.com>
|
||||
* Copyright (C) 2003 Michiel Rook <michiel@grendelproject.nl>
|
||||
* Copyright (C) 2005 Grant Coady <gcoady@gmail.com> with valuable
|
||||
* Copyright (C) 2005 Grant Coady <gcoady.lk@gmail.com> with valuable
|
||||
* guidance from Jean Delvare
|
||||
*
|
||||
* Driver supports Analog Devices ADM9240
|
||||
|
|
@ -774,7 +774,7 @@ static void __exit sensors_adm9240_exit(void)
|
|||
}
|
||||
|
||||
MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, "
|
||||
"Grant Coady <gcoady@gmail.com> and others");
|
||||
"Grant Coady <gcoady.lk@gmail.com> and others");
|
||||
MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
|
|
|
|||
|
|
@ -815,18 +815,18 @@ static int __init sm_lm78_init(void)
|
|||
if (res)
|
||||
return res;
|
||||
|
||||
res = i2c_isa_add_driver(&lm78_isa_driver);
|
||||
if (res) {
|
||||
i2c_del_driver(&lm78_driver);
|
||||
return res;
|
||||
}
|
||||
/* Don't exit if this one fails, we still want the I2C variants
|
||||
to work! */
|
||||
if (i2c_isa_add_driver(&lm78_isa_driver))
|
||||
isa_address = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit sm_lm78_exit(void)
|
||||
{
|
||||
i2c_isa_del_driver(&lm78_isa_driver);
|
||||
if (isa_address)
|
||||
i2c_isa_del_driver(&lm78_isa_driver);
|
||||
i2c_del_driver(&lm78_driver);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
smsc47m1.c - Part of lm_sensors, Linux kernel modules
|
||||
for hardware monitoring
|
||||
|
||||
Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x,
|
||||
LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
|
||||
Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
|
||||
LPC47M14x, LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
|
||||
|
||||
Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
|
||||
Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
|
||||
|
|
@ -380,8 +380,8 @@ static int __init smsc47m1_find(unsigned short *addr)
|
|||
val = superio_inb(SUPERIO_REG_DEVID);
|
||||
|
||||
/*
|
||||
* SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
|
||||
* 0x5F) and LPC47B27x (device id 0x51) have fan control.
|
||||
* SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
|
||||
* (device id 0x5F) and LPC47B27x (device id 0x51) have fan control.
|
||||
* The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
|
||||
* can do much more besides (device id 0x60).
|
||||
* The LPC47M997 is undocumented, but seems to be compatible with
|
||||
|
|
@ -390,7 +390,8 @@ static int __init smsc47m1_find(unsigned short *addr)
|
|||
if (val == 0x51)
|
||||
printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
|
||||
else if (val == 0x59)
|
||||
printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n");
|
||||
printk(KERN_INFO "smsc47m1: Found SMSC "
|
||||
"LPC47M10x/LPC47M112/LPC47M13x\n");
|
||||
else if (val == 0x5F)
|
||||
printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
|
||||
else if (val == 0x60)
|
||||
|
|
|
|||
|
|
@ -354,6 +354,8 @@ static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
|
|||
case 0:
|
||||
reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf)
|
||||
| ((data->fan_div[0] & 0x03) << 4);
|
||||
/* fan5 input control bit is write only, compute the value */
|
||||
reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
|
||||
w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
|
||||
reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf)
|
||||
| ((data->fan_div[0] & 0x04) << 3);
|
||||
|
|
@ -362,6 +364,8 @@ static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
|
|||
case 1:
|
||||
reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f)
|
||||
| ((data->fan_div[1] & 0x03) << 6);
|
||||
/* fan5 input control bit is write only, compute the value */
|
||||
reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
|
||||
w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
|
||||
reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf)
|
||||
| ((data->fan_div[1] & 0x04) << 4);
|
||||
|
|
@ -1216,13 +1220,16 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
|
|||
superio_exit();
|
||||
|
||||
/* It looks like fan4 and fan5 pins can be alternatively used
|
||||
as fan on/off switches */
|
||||
as fan on/off switches, but fan5 control is write only :/
|
||||
We assume that if the serial interface is disabled, designers
|
||||
connected fan5 as input unless they are emitting log 1, which
|
||||
is not the default. */
|
||||
|
||||
data->has_fan = 0x07; /* fan1, fan2 and fan3 */
|
||||
i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
|
||||
if ((i & (1 << 2)) && (!fan4pin))
|
||||
data->has_fan |= (1 << 3);
|
||||
if ((i & (1 << 0)) && (!fan5pin))
|
||||
if (!(i & (1 << 1)) && (!fan5pin))
|
||||
data->has_fan |= (1 << 4);
|
||||
|
||||
/* Register sysfs hooks */
|
||||
|
|
|
|||
|
|
@ -1099,7 +1099,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
|
|||
bank. */
|
||||
if (kind < 0) {
|
||||
if (w83781d_read_value(client, W83781D_REG_CONFIG) & 0x80) {
|
||||
dev_dbg(dev, "Detection failed at step 3\n");
|
||||
dev_dbg(&adapter->dev, "Detection of w83781d chip "
|
||||
"failed at step 3\n");
|
||||
err = -ENODEV;
|
||||
goto ERROR2;
|
||||
}
|
||||
|
|
@ -1109,7 +1110,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
|
|||
if ((!(val1 & 0x07)) &&
|
||||
(((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
|
||||
|| ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
|
||||
dev_dbg(dev, "Detection failed at step 4\n");
|
||||
dev_dbg(&adapter->dev, "Detection of w83781d chip "
|
||||
"failed at step 4\n");
|
||||
err = -ENODEV;
|
||||
goto ERROR2;
|
||||
}
|
||||
|
|
@ -1119,7 +1121,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
|
|||
((val1 & 0x80) && (val2 == 0x5c)))) {
|
||||
if (w83781d_read_value
|
||||
(client, W83781D_REG_I2C_ADDR) != address) {
|
||||
dev_dbg(dev, "Detection failed at step 5\n");
|
||||
dev_dbg(&adapter->dev, "Detection of w83781d "
|
||||
"chip failed at step 5\n");
|
||||
err = -ENODEV;
|
||||
goto ERROR2;
|
||||
}
|
||||
|
|
@ -1141,8 +1144,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
|
|||
else if (val2 == 0x12)
|
||||
vendid = asus;
|
||||
else {
|
||||
dev_dbg(dev, "Chip was made by neither "
|
||||
"Winbond nor Asus?\n");
|
||||
dev_dbg(&adapter->dev, "w83781d chip vendor is "
|
||||
"neither Winbond nor Asus\n");
|
||||
err = -ENODEV;
|
||||
goto ERROR2;
|
||||
}
|
||||
|
|
@ -1161,10 +1164,9 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
|
|||
kind = as99127f;
|
||||
else {
|
||||
if (kind == 0)
|
||||
dev_warn(dev, "Ignoring 'force' "
|
||||
dev_warn(&adapter->dev, "Ignoring 'force' "
|
||||
"parameter for unknown chip at "
|
||||
"adapter %d, address 0x%02x\n",
|
||||
i2c_adapter_id(adapter), address);
|
||||
"address 0x%02x\n", address);
|
||||
err = -EINVAL;
|
||||
goto ERROR2;
|
||||
}
|
||||
|
|
@ -1685,11 +1687,10 @@ sensors_w83781d_init(void)
|
|||
if (res)
|
||||
return res;
|
||||
|
||||
res = i2c_isa_add_driver(&w83781d_isa_driver);
|
||||
if (res) {
|
||||
i2c_del_driver(&w83781d_driver);
|
||||
return res;
|
||||
}
|
||||
/* Don't exit if this one fails, we still want the I2C variants
|
||||
to work! */
|
||||
if (i2c_isa_add_driver(&w83781d_isa_driver))
|
||||
isa_address = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1697,7 +1698,8 @@ sensors_w83781d_init(void)
|
|||
static void __exit
|
||||
sensors_w83781d_exit(void)
|
||||
{
|
||||
i2c_isa_del_driver(&w83781d_isa_driver);
|
||||
if (isa_address)
|
||||
i2c_isa_del_driver(&w83781d_isa_driver);
|
||||
i2c_del_driver(&w83781d_driver);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -746,6 +746,52 @@ static ssize_t store_vrm_reg(struct device *dev,
|
|||
|
||||
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
|
||||
|
||||
#define IN_UNIT_ATTRS(X) \
|
||||
&sda_in_input[X].dev_attr.attr, \
|
||||
&sda_in_min[X].dev_attr.attr, \
|
||||
&sda_in_max[X].dev_attr.attr
|
||||
|
||||
#define FAN_UNIT_ATTRS(X) \
|
||||
&sda_fan_input[X].dev_attr.attr, \
|
||||
&sda_fan_min[X].dev_attr.attr, \
|
||||
&sda_fan_div[X].dev_attr.attr
|
||||
|
||||
#define TEMP_UNIT_ATTRS(X) \
|
||||
&sda_temp_input[X].dev_attr.attr, \
|
||||
&sda_temp_max[X].dev_attr.attr, \
|
||||
&sda_temp_max_hyst[X].dev_attr.attr
|
||||
|
||||
static struct attribute *w83791d_attributes[] = {
|
||||
IN_UNIT_ATTRS(0),
|
||||
IN_UNIT_ATTRS(1),
|
||||
IN_UNIT_ATTRS(2),
|
||||
IN_UNIT_ATTRS(3),
|
||||
IN_UNIT_ATTRS(4),
|
||||
IN_UNIT_ATTRS(5),
|
||||
IN_UNIT_ATTRS(6),
|
||||
IN_UNIT_ATTRS(7),
|
||||
IN_UNIT_ATTRS(8),
|
||||
IN_UNIT_ATTRS(9),
|
||||
FAN_UNIT_ATTRS(0),
|
||||
FAN_UNIT_ATTRS(1),
|
||||
FAN_UNIT_ATTRS(2),
|
||||
FAN_UNIT_ATTRS(3),
|
||||
FAN_UNIT_ATTRS(4),
|
||||
TEMP_UNIT_ATTRS(0),
|
||||
TEMP_UNIT_ATTRS(1),
|
||||
TEMP_UNIT_ATTRS(2),
|
||||
&dev_attr_alarms.attr,
|
||||
&sda_beep_ctrl[0].dev_attr.attr,
|
||||
&sda_beep_ctrl[1].dev_attr.attr,
|
||||
&dev_attr_cpu0_vid.attr,
|
||||
&dev_attr_vrm.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct attribute_group w83791d_group = {
|
||||
.attrs = w83791d_attributes,
|
||||
};
|
||||
|
||||
/* This function is called when:
|
||||
* w83791d_driver is inserted (when this module is loaded), for each
|
||||
available adapter
|
||||
|
|
@ -967,41 +1013,20 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
|
|||
}
|
||||
|
||||
/* Register sysfs hooks */
|
||||
if ((err = sysfs_create_group(&client->dev.kobj, &w83791d_group)))
|
||||
goto error3;
|
||||
|
||||
/* Everything is ready, now register the working device */
|
||||
data->class_dev = hwmon_device_register(dev);
|
||||
if (IS_ERR(data->class_dev)) {
|
||||
err = PTR_ERR(data->class_dev);
|
||||
goto error3;
|
||||
goto error4;
|
||||
}
|
||||
|
||||
for (i = 0; i < NUMBER_OF_VIN; i++) {
|
||||
device_create_file(dev, &sda_in_input[i].dev_attr);
|
||||
device_create_file(dev, &sda_in_min[i].dev_attr);
|
||||
device_create_file(dev, &sda_in_max[i].dev_attr);
|
||||
}
|
||||
|
||||
for (i = 0; i < NUMBER_OF_FANIN; i++) {
|
||||
device_create_file(dev, &sda_fan_input[i].dev_attr);
|
||||
device_create_file(dev, &sda_fan_div[i].dev_attr);
|
||||
device_create_file(dev, &sda_fan_min[i].dev_attr);
|
||||
}
|
||||
|
||||
for (i = 0; i < NUMBER_OF_TEMPIN; i++) {
|
||||
device_create_file(dev, &sda_temp_input[i].dev_attr);
|
||||
device_create_file(dev, &sda_temp_max[i].dev_attr);
|
||||
device_create_file(dev, &sda_temp_max_hyst[i].dev_attr);
|
||||
}
|
||||
|
||||
device_create_file(dev, &dev_attr_alarms);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(sda_beep_ctrl); i++) {
|
||||
device_create_file(dev, &sda_beep_ctrl[i].dev_attr);
|
||||
}
|
||||
|
||||
device_create_file(dev, &dev_attr_cpu0_vid);
|
||||
device_create_file(dev, &dev_attr_vrm);
|
||||
|
||||
return 0;
|
||||
|
||||
error4:
|
||||
sysfs_remove_group(&client->dev.kobj, &w83791d_group);
|
||||
error3:
|
||||
if (data->lm75[0] != NULL) {
|
||||
i2c_detach_client(data->lm75[0]);
|
||||
|
|
@ -1025,8 +1050,10 @@ static int w83791d_detach_client(struct i2c_client *client)
|
|||
int err;
|
||||
|
||||
/* main client */
|
||||
if (data)
|
||||
if (data) {
|
||||
hwmon_device_unregister(data->class_dev);
|
||||
sysfs_remove_group(&client->dev.kobj, &w83791d_group);
|
||||
}
|
||||
|
||||
if ((err = i2c_detach_client(client)))
|
||||
return err;
|
||||
|
|
|
|||
|
|
@ -91,7 +91,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver)
|
|||
/* Now look for clients */
|
||||
res = driver->attach_adapter(&isa_adapter);
|
||||
if (res) {
|
||||
dev_err(&isa_adapter.dev,
|
||||
dev_dbg(&isa_adapter.dev,
|
||||
"Driver %s failed to attach adapter, unregistering\n",
|
||||
driver->driver.name);
|
||||
driver_unregister(&driver->driver);
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче