bcma: add PMU clock support for BCM4706

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Hauke Mehrtens 2012-07-09 22:03:10 +02:00 коммит произвёл John W. Linville
Родитель 9a89c3a856
Коммит 650cef3826
2 изменённых файлов: 50 добавлений и 4 удалений

Просмотреть файл

@ -226,6 +226,36 @@ static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
return (fc / div) * 1000000;
}
static u32 bcma_pmu_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
{
u32 tmp, ndiv, p1div, p2div;
u32 clock;
BUG_ON(!m || m > 4);
/* Get N, P1 and P2 dividers to determine CPU clock */
tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF);
ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK)
>> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT;
p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK)
>> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT;
p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK)
>> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT;
tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION)
/* Low cost bonding: Fixed reference clock 25MHz and m = 4 */
clock = (25000000 / 4) * ndiv * p2div / p1div;
else
/* Fixed reference clock 25MHz and m = 2 */
clock = (25000000 / 2) * ndiv * p2div / p1div;
if (m == BCMA_CC_PMU5_MAINPLL_SSB)
clock = clock / 4;
return clock;
}
/* query bus clock frequency for PMU-enabled chipcommon */
u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
{
@ -245,8 +275,8 @@ u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
BCMA_CC_PMU5_MAINPLL_SSB);
case BCMA_CHIP_ID_BCM4706:
return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
BCMA_CC_PMU5_MAINPLL_SSB);
return bcma_pmu_clock_bcm4706(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
BCMA_CC_PMU5_MAINPLL_SSB);
case BCMA_CHIP_ID_BCM53572:
return 75000000;
default:
@ -267,6 +297,10 @@ u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
if (cc->pmu.rev >= 5) {
u32 pll;
switch (bus->chipinfo.id) {
case BCMA_CHIP_ID_BCM4706:
return bcma_pmu_clock_bcm4706(cc,
BCMA_CC_PMU4706_MAINPLL_PLL0,
BCMA_CC_PMU5_MAINPLL_CPU);
case BCMA_CHIP_ID_BCM5356:
pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
break;
@ -279,8 +313,6 @@ u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
break;
}
/* TODO: if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
}

Просмотреть файл

@ -88,6 +88,11 @@
#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2
#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2
#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4
#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */
#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */
#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
@ -280,6 +285,15 @@
/* 4706 PMU */
#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */
#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000
#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16
#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000
#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12
#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8
#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000