8250: blacklist Winbond CIR port

The legacy serial driver will detect the Winbond CIR device as a serial
port, since it looks exactly like a serial port unless you know what
it is from the PNP ID.

Here we track this port as a special PORT_8250_CIR type, preventing the
legacy serial driver from probing it.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250.c

@@ -290,6 +290,9 @@ static const struct serial8250_config uart_config[] = {
 				  UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_8250_CIR] = {
+		.name		= "CIR port"
+	}
 };
 
 /* Uart divisor latch read */
@@ -1900,6 +1903,9 @@ static int serial8250_startup(struct uart_port *port)
 	unsigned char lsr, iir;
 	int retval;
 
+	if (port->type == PORT_8250_CIR)
+		return -ENODEV;
+
 	port->fifosize = uart_config[up->port.type].fifo_size;
 	up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
 	up->capabilities = uart_config[up->port.type].flags;
@@ -2557,7 +2563,10 @@ static int serial8250_request_port(struct uart_port *port)
 {
 	struct uart_8250_port *up =
 		container_of(port, struct uart_8250_port, port);
-	int ret = 0;
+	int ret;
+
+	if (port->type == PORT_8250_CIR)
+		return -ENODEV;
 
 	ret = serial8250_request_std_resource(up);
 	if (ret == 0 && port->type == PORT_RSA) {
@@ -2576,6 +2585,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	int probeflags = PROBE_ANY;
 	int ret;
 
+	if (port->type == PORT_8250_CIR)
+		return;
+
 	/*
 	 * Find the region that we can probe for.  This in turn
 	 * tells us whether we can probe for the type of port.
@@ -3147,7 +3159,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 	mutex_lock(&serial_mutex);
 
 	uart = serial8250_find_match_or_unused(&up->port);
-	if (uart) {
+	if (uart && uart->port.type != PORT_8250_CIR) {
 		if (uart->port.dev)
 			uart_remove_one_port(&serial8250_reg, &uart->port);
 

drivers/tty/serial/8250/8250_pnp.c

@@ -25,7 +25,7 @@
 #include "8250.h"
 
 #define UNKNOWN_DEV 0x3000
-
+#define CIR_PORT	0x0800
 
 static const struct pnp_device_id pnp_dev_table[] = {
 	/* Archtek America Corp. */
@@ -362,6 +362,9 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"PNPCXXX",		UNKNOWN_DEV	},
 	/* More unknown PnP modems */
 	{	"PNPDXXX",		UNKNOWN_DEV	},
+	/* Winbond CIR port, should not be probed. We should keep track
+	   of it to prevent the legacy serial driver from probing it */
+	{	"WEC1022",		CIR_PORT	},
 	{	"",			0	}
 };
 
@@ -409,7 +412,7 @@ static int __devinit check_resources(struct pnp_dev *dev)
  * PnP modems, alternatively we must hardcode all modems in pnp_devices[]
  * table.
  */
-static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
+static int __devinit serial_pnp_guess_board(struct pnp_dev *dev)
 {
 	if (!(check_name(pnp_dev_name(dev)) ||
 		(dev->card && check_name(dev->card->name))))
@@ -428,7 +431,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	int ret, line, flags = dev_id->driver_data;
 
 	if (flags & UNKNOWN_DEV) {
-		ret = serial_pnp_guess_board(dev, &flags);
+		ret = serial_pnp_guess_board(dev);
 		if (ret < 0)
 			return ret;
 	}
@@ -436,7 +439,10 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	memset(&uart, 0, sizeof(uart));
 	if (pnp_irq_valid(dev, 0))
 		uart.port.irq = pnp_irq(dev, 0);
-	if (pnp_port_valid(dev, 0)) {
+	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
+		uart.port.iobase = pnp_port_start(dev, 2);
+		uart.port.iotype = UPIO_PORT;
+	} else if (pnp_port_valid(dev, 0)) {
 		uart.port.iobase = pnp_port_start(dev, 0);
 		uart.port.iotype = UPIO_PORT;
 	} else if (pnp_mem_valid(dev, 0)) {
@@ -451,6 +457,10 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 		"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
 		       uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
 #endif
+	if (flags & CIR_PORT) {
+		uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
+		uart.port.type = PORT_8250_CIR;
+	}
 
 	uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
 	if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
@@ -459,7 +469,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	uart.port.dev = &dev->dev;
 
 	line = serial8250_register_8250_port(&uart);
-	if (line < 0)
+	if (line < 0 || (flags & CIR_PORT))
 		return -ENODEV;
 
 	pnp_set_drvdata(dev, (void *)((long)line + 1));

include/linux/serial_core.h

@@ -48,7 +48,8 @@
 #define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
 #define PORT_XR17D15X	21	/* Exar XR17D15x UART */
 #define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
-#define PORT_MAX_8250	22	/* max port ID */
+#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
+#define PORT_MAX_8250	23	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed