power: reset: add LTC2952 poweroff driver
This adds a driver for the LTC2952, an external power control chip, which signals the OS to shut down. Additionally this driver lets the kernel power down the board. Signed-off-by: René Moll <rene.moll@xsens.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit is contained in:
Родитель
7195c505c2
Коммит
6647156c00
|
@ -51,6 +51,13 @@ config POWER_RESET_MSM
|
|||
help
|
||||
Power off and restart support for Qualcomm boards.
|
||||
|
||||
config POWER_RESET_LTC2952
|
||||
bool "LTC2952 PowerPath power-off driver"
|
||||
depends on OF_GPIO && POWER_RESET
|
||||
help
|
||||
This driver supports an external powerdown trigger and board power
|
||||
down via the LTC2952. Bindings are made in the device tree.
|
||||
|
||||
config POWER_RESET_QNAP
|
||||
bool "QNAP power-off driver"
|
||||
depends on OF_GPIO && POWER_RESET && PLAT_ORION
|
||||
|
|
|
@ -4,6 +4,7 @@ obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
|
|||
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
|
||||
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
|
||||
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
|
||||
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
|
||||
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
|
||||
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
|
||||
obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o
|
||||
|
|
|
@ -0,0 +1,386 @@
|
|||
/*
|
||||
* LTC2952 (PowerPath) driver
|
||||
*
|
||||
* Copyright (C) 2014, Xsens Technologies BV <info@xsens.com>
|
||||
* Maintainer: René Moll <linux@r-moll.nl>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* ----------------------------------------
|
||||
* - Description
|
||||
* ----------------------------------------
|
||||
*
|
||||
* This driver is to be used with an external PowerPath Controller (LTC2952).
|
||||
* Its function is to determine when a external shut down is triggered
|
||||
* and react by properly shutting down the system.
|
||||
*
|
||||
* This driver expects a device tree with a ltc2952 entry for pin mapping.
|
||||
*
|
||||
* ----------------------------------------
|
||||
* - GPIO
|
||||
* ----------------------------------------
|
||||
*
|
||||
* The following GPIOs are used:
|
||||
* - trigger (input)
|
||||
* A level change indicates the shut-down trigger. If it's state reverts
|
||||
* within the time-out defined by trigger_delay, the shut down is not
|
||||
* executed.
|
||||
*
|
||||
* - watchdog (output)
|
||||
* Once a shut down is triggered, the driver will toggle this signal,
|
||||
* with an internal (wde_interval) to stall the hardware shut down.
|
||||
*
|
||||
* - kill (output)
|
||||
* The last action during shut down is triggering this signalling, such
|
||||
* that the PowerPath Control will power down the hardware.
|
||||
*
|
||||
* ----------------------------------------
|
||||
* - Interrupts
|
||||
* ----------------------------------------
|
||||
*
|
||||
* The driver requires a non-shared, edge-triggered interrupt on the trigger
|
||||
* GPIO.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ktime.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/kmod.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/reboot.h>
|
||||
|
||||
struct ltc2952_poweroff_data {
|
||||
struct hrtimer timer_trigger;
|
||||
struct hrtimer timer_wde;
|
||||
|
||||
ktime_t trigger_delay;
|
||||
ktime_t wde_interval;
|
||||
|
||||
struct device *dev;
|
||||
|
||||
unsigned int virq;
|
||||
|
||||
/**
|
||||
* 0: trigger
|
||||
* 1: watchdog
|
||||
* 2: kill
|
||||
*/
|
||||
struct gpio_desc *gpio[3];
|
||||
};
|
||||
|
||||
static int ltc2952_poweroff_panic;
|
||||
static struct ltc2952_poweroff_data *ltc2952_data;
|
||||
|
||||
#define POWERPATH_IO_TRIGGER 0
|
||||
#define POWERPATH_IO_WATCHDOG 1
|
||||
#define POWERPATH_IO_KILL 2
|
||||
|
||||
/**
|
||||
* ltc2952_poweroff_timer_wde - Timer callback
|
||||
* Toggles the watchdog reset signal each wde_interval
|
||||
*
|
||||
* @timer: corresponding timer
|
||||
*
|
||||
* Returns HRTIMER_RESTART for an infinite loop which will only stop when the
|
||||
* machine actually shuts down
|
||||
*/
|
||||
static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
|
||||
{
|
||||
ktime_t now;
|
||||
int state;
|
||||
unsigned long overruns;
|
||||
|
||||
if (ltc2952_poweroff_panic)
|
||||
return HRTIMER_NORESTART;
|
||||
|
||||
state = gpiod_get_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG]);
|
||||
gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], !state);
|
||||
|
||||
now = hrtimer_cb_get_time(timer);
|
||||
overruns = hrtimer_forward(timer, now, ltc2952_data->wde_interval);
|
||||
|
||||
return HRTIMER_RESTART;
|
||||
}
|
||||
|
||||
static enum hrtimer_restart ltc2952_poweroff_timer_trigger(
|
||||
struct hrtimer *timer)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = hrtimer_start(<c2952_data->timer_wde,
|
||||
ltc2952_data->wde_interval, HRTIMER_MODE_REL);
|
||||
|
||||
if (ret) {
|
||||
dev_err(ltc2952_data->dev, "unable to start the timer\n");
|
||||
/*
|
||||
* The device will not toggle the watchdog reset,
|
||||
* thus shut down is only safe if the PowerPath controller
|
||||
* has a long enough time-off before triggering a hardware
|
||||
* power-off.
|
||||
*
|
||||
* Only sending a warning as the system will power-off anyway
|
||||
*/
|
||||
}
|
||||
|
||||
dev_info(ltc2952_data->dev, "executing shutdown\n");
|
||||
|
||||
orderly_poweroff(true);
|
||||
|
||||
return HRTIMER_NORESTART;
|
||||
}
|
||||
|
||||
/**
|
||||
* ltc2952_poweroff_handler - Interrupt handler
|
||||
* Triggered each time the trigger signal changes state and (de)activates a
|
||||
* time-out (timer_trigger). Once the time-out is actually reached the shut
|
||||
* down is executed.
|
||||
*
|
||||
* @irq: IRQ number
|
||||
* @dev_id: pointer to the main data structure
|
||||
*/
|
||||
static irqreturn_t ltc2952_poweroff_handler(int irq, void *dev_id)
|
||||
{
|
||||
int ret;
|
||||
struct ltc2952_poweroff_data *data = dev_id;
|
||||
|
||||
if (ltc2952_poweroff_panic)
|
||||
goto irq_ok;
|
||||
|
||||
if (hrtimer_active(&data->timer_wde)) {
|
||||
/* shutdown is already triggered, nothing to do any more */
|
||||
goto irq_ok;
|
||||
}
|
||||
|
||||
if (!hrtimer_active(&data->timer_trigger)) {
|
||||
ret = hrtimer_start(&data->timer_trigger, data->trigger_delay,
|
||||
HRTIMER_MODE_REL);
|
||||
|
||||
if (ret)
|
||||
dev_err(data->dev, "unable to start the wait timer\n");
|
||||
} else {
|
||||
ret = hrtimer_cancel(&data->timer_trigger);
|
||||
/* omitting return value check, timer should have been valid */
|
||||
}
|
||||
|
||||
irq_ok:
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void ltc2952_poweroff_kill(void)
|
||||
{
|
||||
gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_KILL], 1);
|
||||
}
|
||||
|
||||
static int ltc2952_poweroff_suspend(struct platform_device *pdev,
|
||||
pm_message_t state)
|
||||
{
|
||||
return -ENOSYS;
|
||||
}
|
||||
|
||||
static int ltc2952_poweroff_resume(struct platform_device *pdev)
|
||||
{
|
||||
return -ENOSYS;
|
||||
}
|
||||
|
||||
static void ltc2952_poweroff_default(struct ltc2952_poweroff_data *data)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(data->gpio); i++)
|
||||
data->gpio[i] = NULL;
|
||||
|
||||
data->wde_interval = ktime_set(0, 300L*1E6L);
|
||||
data->trigger_delay = ktime_set(2, 500L*1E6L);
|
||||
|
||||
hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
||||
data->timer_trigger.function = <c2952_poweroff_timer_trigger;
|
||||
|
||||
hrtimer_init(&data->timer_wde, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
||||
data->timer_wde.function = <c2952_poweroff_timer_wde;
|
||||
}
|
||||
|
||||
static int ltc2952_poweroff_init(struct platform_device *pdev)
|
||||
{
|
||||
int ret, virq;
|
||||
unsigned int i;
|
||||
struct ltc2952_poweroff_data *data;
|
||||
|
||||
static char *name[] = {
|
||||
"trigger",
|
||||
"watchdog",
|
||||
"kill",
|
||||
NULL
|
||||
};
|
||||
|
||||
data = ltc2952_data;
|
||||
ltc2952_poweroff_default(ltc2952_data);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++) {
|
||||
ltc2952_data->gpio[i] = gpiod_get(&pdev->dev, name[i]);
|
||||
|
||||
if (IS_ERR(ltc2952_data->gpio[i])) {
|
||||
ret = PTR_ERR(ltc2952_data->gpio[i]);
|
||||
dev_err(&pdev->dev,
|
||||
"unable to claim the following gpio: %s\n",
|
||||
name[i]);
|
||||
goto err_io;
|
||||
}
|
||||
}
|
||||
|
||||
ret = gpiod_direction_output(
|
||||
ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], 0);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "unable to use watchdog-gpio as output\n");
|
||||
goto err_io;
|
||||
}
|
||||
|
||||
ret = gpiod_direction_output(ltc2952_data->gpio[POWERPATH_IO_KILL], 0);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "unable to use kill-gpio as output\n");
|
||||
goto err_io;
|
||||
}
|
||||
|
||||
virq = gpiod_to_irq(ltc2952_data->gpio[POWERPATH_IO_TRIGGER]);
|
||||
if (virq < 0) {
|
||||
dev_err(&pdev->dev, "cannot map GPIO as interrupt");
|
||||
goto err_io;
|
||||
}
|
||||
|
||||
ltc2952_data->virq = virq;
|
||||
ret = request_irq(virq,
|
||||
ltc2952_poweroff_handler,
|
||||
(IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
|
||||
"ltc2952-poweroff",
|
||||
ltc2952_data
|
||||
);
|
||||
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "cannot configure an interrupt handler\n");
|
||||
goto err_io;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_io:
|
||||
for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
|
||||
if (ltc2952_data->gpio[i])
|
||||
gpiod_put(ltc2952_data->gpio[i]);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ltc2952_poweroff_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (pm_power_off) {
|
||||
dev_err(&pdev->dev, "pm_power_off already registered");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
ltc2952_data = kzalloc(sizeof(*ltc2952_data), GFP_KERNEL);
|
||||
if (!ltc2952_data)
|
||||
return -ENOMEM;
|
||||
|
||||
ltc2952_data->dev = &pdev->dev;
|
||||
|
||||
ret = ltc2952_poweroff_init(pdev);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
pm_power_off = <c2952_poweroff_kill;
|
||||
|
||||
dev_info(&pdev->dev, "probe successful\n");
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
kfree(ltc2952_data);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ltc2952_poweroff_remove(struct platform_device *pdev)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
pm_power_off = NULL;
|
||||
|
||||
if (ltc2952_data) {
|
||||
free_irq(ltc2952_data->virq, ltc2952_data);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
|
||||
gpiod_put(ltc2952_data->gpio[i]);
|
||||
|
||||
kfree(ltc2952_data);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id of_ltc2952_poweroff_match[] = {
|
||||
{ .compatible = "lltc,ltc2952"},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, of_ltc2952_poweroff_match);
|
||||
|
||||
static struct platform_driver ltc2952_poweroff_driver = {
|
||||
.probe = ltc2952_poweroff_probe,
|
||||
.remove = ltc2952_poweroff_remove,
|
||||
.driver = {
|
||||
.name = "ltc2952-poweroff",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_ltc2952_poweroff_match,
|
||||
},
|
||||
.suspend = ltc2952_poweroff_suspend,
|
||||
.resume = ltc2952_poweroff_resume,
|
||||
};
|
||||
|
||||
static int ltc2952_poweroff_notify_panic(struct notifier_block *nb,
|
||||
unsigned long code, void *unused)
|
||||
{
|
||||
ltc2952_poweroff_panic = 1;
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
static struct notifier_block ltc2952_poweroff_panic_nb = {
|
||||
.notifier_call = ltc2952_poweroff_notify_panic,
|
||||
};
|
||||
|
||||
static int __init ltc2952_poweroff_platform_init(void)
|
||||
{
|
||||
ltc2952_poweroff_panic = 0;
|
||||
|
||||
atomic_notifier_chain_register(&panic_notifier_list,
|
||||
<c2952_poweroff_panic_nb);
|
||||
|
||||
return platform_driver_register(<c2952_poweroff_driver);
|
||||
}
|
||||
|
||||
static void __exit ltc2952_poweroff_platform_exit(void)
|
||||
{
|
||||
atomic_notifier_chain_unregister(&panic_notifier_list,
|
||||
<c2952_poweroff_panic_nb);
|
||||
|
||||
platform_driver_unregister(<c2952_poweroff_driver);
|
||||
}
|
||||
|
||||
module_init(ltc2952_poweroff_platform_init);
|
||||
module_exit(ltc2952_poweroff_platform_exit);
|
||||
|
||||
MODULE_AUTHOR("René Moll <rene.moll@xsens.com>");
|
||||
MODULE_DESCRIPTION("LTC PowerPath power-off driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Загрузка…
Ссылка в новой задаче