Watchdog: DA9052/53 PMIC watchdog support
This driver adds support for the watchdog functionality provided by the Dialog Semiconductor DA9052 PMIC chip. Tested on samsung smdkv6410 and i.mx53 QS boards. Signed-off-by: Anthony Olech <Anthony.Olech@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Родитель
54e2dc9341
Коммит
664a0d7862
|
@ -78,6 +78,11 @@ wd0_timeout: Default watchdog0 timeout in 1/10secs
|
||||||
wd1_timeout: Default watchdog1 timeout in 1/10secs
|
wd1_timeout: Default watchdog1 timeout in 1/10secs
|
||||||
wd2_timeout: Default watchdog2 timeout in 1/10secs
|
wd2_timeout: Default watchdog2 timeout in 1/10secs
|
||||||
-------------------------------------------------
|
-------------------------------------------------
|
||||||
|
da9052wdt:
|
||||||
|
timeout: Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s
|
||||||
|
nowayout: Watchdog cannot be stopped once started
|
||||||
|
(default=kernel config parameter)
|
||||||
|
-------------------------------------------------
|
||||||
davinci_wdt:
|
davinci_wdt:
|
||||||
heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60
|
heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60
|
||||||
-------------------------------------------------
|
-------------------------------------------------
|
||||||
|
|
|
@ -64,6 +64,18 @@ config SOFT_WATCHDOG
|
||||||
To compile this driver as a module, choose M here: the
|
To compile this driver as a module, choose M here: the
|
||||||
module will be called softdog.
|
module will be called softdog.
|
||||||
|
|
||||||
|
config DA9052_WATCHDOG
|
||||||
|
tristate "Dialog DA9052 Watchdog"
|
||||||
|
depends on PMIC_DA9052
|
||||||
|
select WATCHDOG_CORE
|
||||||
|
help
|
||||||
|
Support for the watchdog in the DA9052 PMIC. Watchdog trigger
|
||||||
|
cause system reset.
|
||||||
|
|
||||||
|
Say Y here to include support for the DA9052 watchdog.
|
||||||
|
Alternatively say M to compile the driver as a module,
|
||||||
|
which will be called da9052_wdt.
|
||||||
|
|
||||||
config WM831X_WATCHDOG
|
config WM831X_WATCHDOG
|
||||||
tristate "WM831x watchdog"
|
tristate "WM831x watchdog"
|
||||||
depends on MFD_WM831X
|
depends on MFD_WM831X
|
||||||
|
|
|
@ -163,6 +163,7 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
|
||||||
obj-$(CONFIG_XEN_WDT) += xen_wdt.o
|
obj-$(CONFIG_XEN_WDT) += xen_wdt.o
|
||||||
|
|
||||||
# Architecture Independent
|
# Architecture Independent
|
||||||
|
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
|
||||||
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
|
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
|
||||||
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
|
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
|
||||||
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
|
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
|
||||||
|
|
|
@ -0,0 +1,251 @@
|
||||||
|
/*
|
||||||
|
* System monitoring driver for DA9052 PMICs.
|
||||||
|
*
|
||||||
|
* Copyright(c) 2012 Dialog Semiconductor Ltd.
|
||||||
|
*
|
||||||
|
* Author: Anthony Olech <Anthony.Olech@diasemi.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
#include <linux/uaccess.h>
|
||||||
|
#include <linux/platform_device.h>
|
||||||
|
#include <linux/time.h>
|
||||||
|
#include <linux/watchdog.h>
|
||||||
|
#include <linux/types.h>
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/jiffies.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
#include <linux/mfd/da9052/reg.h>
|
||||||
|
#include <linux/mfd/da9052/da9052.h>
|
||||||
|
|
||||||
|
#define DA9052_DEF_TIMEOUT 4
|
||||||
|
#define DA9052_TWDMIN 256
|
||||||
|
|
||||||
|
struct da9052_wdt_data {
|
||||||
|
struct watchdog_device wdt;
|
||||||
|
struct da9052 *da9052;
|
||||||
|
struct kref kref;
|
||||||
|
unsigned long jpast;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct {
|
||||||
|
u8 reg_val;
|
||||||
|
int time; /* Seconds */
|
||||||
|
} da9052_wdt_maps[] = {
|
||||||
|
{ 1, 2 },
|
||||||
|
{ 2, 4 },
|
||||||
|
{ 3, 8 },
|
||||||
|
{ 4, 16 },
|
||||||
|
{ 5, 32 },
|
||||||
|
{ 5, 33 }, /* Actual time 32.768s so included both 32s and 33s */
|
||||||
|
{ 6, 65 },
|
||||||
|
{ 6, 66 }, /* Actual time 65.536s so include both, 65s and 66s */
|
||||||
|
{ 7, 131 },
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static void da9052_wdt_release_resources(struct kref *r)
|
||||||
|
{
|
||||||
|
struct da9052_wdt_data *driver_data =
|
||||||
|
container_of(r, struct da9052_wdt_data, kref);
|
||||||
|
|
||||||
|
kfree(driver_data);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev,
|
||||||
|
unsigned int timeout)
|
||||||
|
{
|
||||||
|
struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
|
||||||
|
struct da9052 *da9052 = driver_data->da9052;
|
||||||
|
int ret, i;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Disable the Watchdog timer before setting
|
||||||
|
* new time out.
|
||||||
|
*/
|
||||||
|
ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
|
||||||
|
DA9052_CONTROLD_TWDSCALE, 0);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(da9052->dev, "Failed to disable watchdog bit, %d\n",
|
||||||
|
ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
if (timeout) {
|
||||||
|
/*
|
||||||
|
* To change the timeout, da9052 needs to
|
||||||
|
* be disabled for at least 150 us.
|
||||||
|
*/
|
||||||
|
udelay(150);
|
||||||
|
|
||||||
|
/* Set the desired timeout */
|
||||||
|
for (i = 0; i < ARRAY_SIZE(da9052_wdt_maps); i++)
|
||||||
|
if (da9052_wdt_maps[i].time == timeout)
|
||||||
|
break;
|
||||||
|
|
||||||
|
if (i == ARRAY_SIZE(da9052_wdt_maps))
|
||||||
|
ret = -EINVAL;
|
||||||
|
else
|
||||||
|
ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
|
||||||
|
DA9052_CONTROLD_TWDSCALE,
|
||||||
|
da9052_wdt_maps[i].reg_val);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(da9052->dev,
|
||||||
|
"Failed to update timescale bit, %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
wdt_dev->timeout = timeout;
|
||||||
|
driver_data->jpast = jiffies;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void da9052_wdt_ref(struct watchdog_device *wdt_dev)
|
||||||
|
{
|
||||||
|
struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
|
||||||
|
|
||||||
|
kref_get(&driver_data->kref);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void da9052_wdt_unref(struct watchdog_device *wdt_dev)
|
||||||
|
{
|
||||||
|
struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
|
||||||
|
|
||||||
|
kref_put(&driver_data->kref, da9052_wdt_release_resources);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int da9052_wdt_start(struct watchdog_device *wdt_dev)
|
||||||
|
{
|
||||||
|
return da9052_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int da9052_wdt_stop(struct watchdog_device *wdt_dev)
|
||||||
|
{
|
||||||
|
return da9052_wdt_set_timeout(wdt_dev, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int da9052_wdt_ping(struct watchdog_device *wdt_dev)
|
||||||
|
{
|
||||||
|
struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
|
||||||
|
struct da9052 *da9052 = driver_data->da9052;
|
||||||
|
unsigned long msec, jnow = jiffies;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* We have a minimum time for watchdog window called TWDMIN. A write
|
||||||
|
* to the watchdog before this elapsed time should cause an error.
|
||||||
|
*/
|
||||||
|
msec = (jnow - driver_data->jpast) * 1000/HZ;
|
||||||
|
if (msec < DA9052_TWDMIN)
|
||||||
|
mdelay(msec);
|
||||||
|
|
||||||
|
/* Reset the watchdog timer */
|
||||||
|
ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
|
||||||
|
DA9052_CONTROLD_WATCHDOG, 1 << 7);
|
||||||
|
if (ret < 0)
|
||||||
|
goto err_strobe;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* FIXME: Reset the watchdog core, in general PMIC
|
||||||
|
* is supposed to do this
|
||||||
|
*/
|
||||||
|
ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
|
||||||
|
DA9052_CONTROLD_WATCHDOG, 0 << 7);
|
||||||
|
err_strobe:
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct watchdog_info da9052_wdt_info = {
|
||||||
|
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
|
||||||
|
.identity = "DA9052 Watchdog",
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct watchdog_ops da9052_wdt_ops = {
|
||||||
|
.owner = THIS_MODULE,
|
||||||
|
.start = da9052_wdt_start,
|
||||||
|
.stop = da9052_wdt_stop,
|
||||||
|
.ping = da9052_wdt_ping,
|
||||||
|
.set_timeout = da9052_wdt_set_timeout,
|
||||||
|
.ref = da9052_wdt_ref,
|
||||||
|
.unref = da9052_wdt_unref,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static int __devinit da9052_wdt_probe(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent);
|
||||||
|
struct da9052_wdt_data *driver_data;
|
||||||
|
struct watchdog_device *da9052_wdt;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data),
|
||||||
|
GFP_KERNEL);
|
||||||
|
if (!driver_data) {
|
||||||
|
dev_err(da9052->dev, "Unable to alloacate watchdog device\n");
|
||||||
|
ret = -ENOMEM;
|
||||||
|
goto err;
|
||||||
|
}
|
||||||
|
driver_data->da9052 = da9052;
|
||||||
|
|
||||||
|
da9052_wdt = &driver_data->wdt;
|
||||||
|
|
||||||
|
da9052_wdt->timeout = DA9052_DEF_TIMEOUT;
|
||||||
|
da9052_wdt->info = &da9052_wdt_info;
|
||||||
|
da9052_wdt->ops = &da9052_wdt_ops;
|
||||||
|
watchdog_set_drvdata(da9052_wdt, driver_data);
|
||||||
|
|
||||||
|
kref_init(&driver_data->kref);
|
||||||
|
|
||||||
|
ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
|
||||||
|
DA9052_CONTROLD_TWDSCALE, 0);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(&pdev->dev, "Failed to disable watchdog bits, %d\n",
|
||||||
|
ret);
|
||||||
|
goto err;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = watchdog_register_device(&driver_data->wdt);
|
||||||
|
if (ret != 0) {
|
||||||
|
dev_err(da9052->dev, "watchdog_register_device() failed: %d\n",
|
||||||
|
ret);
|
||||||
|
goto err;
|
||||||
|
}
|
||||||
|
|
||||||
|
dev_set_drvdata(&pdev->dev, driver_data);
|
||||||
|
err:
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int __devexit da9052_wdt_remove(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct da9052_wdt_data *driver_data = dev_get_drvdata(&pdev->dev);
|
||||||
|
|
||||||
|
watchdog_unregister_device(&driver_data->wdt);
|
||||||
|
kref_put(&driver_data->kref, da9052_wdt_release_resources);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct platform_driver da9052_wdt_driver = {
|
||||||
|
.probe = da9052_wdt_probe,
|
||||||
|
.remove = __devexit_p(da9052_wdt_remove),
|
||||||
|
.driver = {
|
||||||
|
.name = "da9052-watchdog",
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
module_platform_driver(da9052_wdt_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
|
||||||
|
MODULE_DESCRIPTION("DA9052 SM Device Driver");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
|
MODULE_ALIAS("platform:da9052-watchdog");
|
Загрузка…
Ссылка в новой задаче