ARM: dts: Add USB 2.0 support on exynos5420

Add required device node for ehci and ohci controllers to
enable USB 2.0 support.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/boot/dts/exynos5420.dtsi

@@ -816,6 +816,36 @@
 		#phy-cells = <1>;
 	};
 
+	usbhost2: usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USBH20>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy 1>;
+		};
+	};
+
+	usbhost1: usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USBH20>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy 1>;
+		};
+	};
+
 	usb2_phy: phy@12130000 {
 		compatible = "samsung,exynos5250-usb2-phy";
 		reg = <0x12130000 0x100>;