[ARM] 4979/1: [AT91] Olimex SAM9-L9260 board support
Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor
Russell King
Родитель
35131fb6c2
Коммит
66dbfc6cd9
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
|
|
@ -140,6 +140,13 @@ config MACH_CAM60
|
|||
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
|
||||
<http://www.kwikbyte.com/KB9260.html>
|
||||
|
||||
config MACH_SAM9_L9260
|
||||
bool "Olimex SAM9-L9260 board"
|
||||
depends on ARCH_AT91SAM9260
|
||||
help
|
||||
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
|
||||
<http://www.olimex.com/dev/sam9-L9260.html>
|
||||
|
||||
endif
|
||||
|
||||
# ----------------------------------------------------------
|
||||
|
|
@ -223,7 +230,7 @@ comment "AT91 Board Options"
|
|||
|
||||
config MTD_AT91_DATAFLASH_CARD
|
||||
bool "Enable DataFlash Card support"
|
||||
depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
|
||||
depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260)
|
||||
help
|
||||
Enable support for the DataFlash card.
|
||||
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
|
|||
# AT91SAM9260 board-specific support
|
||||
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
|
||||
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
|
||||
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
|
||||
|
||||
# AT91SAM9261 board-specific support
|
||||
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,199 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91/board-sam9-l9260.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People
|
||||
* Copyright (C) 2006 Atmel
|
||||
* Copyright (C) 2007 Olimex Ltd
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
|
||||
static void __init ek_map_io(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
at91sam9260_initialize(18432000);
|
||||
|
||||
/* Setup the LEDs */
|
||||
at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
|
||||
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
||||
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
|
||||
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
||||
| ATMEL_UART_RI);
|
||||
|
||||
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
|
||||
at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
|
||||
/* set serial console to ttyS0 (ie, DBGU) */
|
||||
at91_set_serial_console(0);
|
||||
}
|
||||
|
||||
static void __init ek_init_irq(void)
|
||||
{
|
||||
at91sam9260_init_interrupts(NULL);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* USB Host port
|
||||
*/
|
||||
static struct at91_usbh_data __initdata ek_usbh_data = {
|
||||
.ports = 2,
|
||||
};
|
||||
|
||||
/*
|
||||
* USB Device port
|
||||
*/
|
||||
static struct at91_udc_data __initdata ek_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PC5,
|
||||
.pullup_pin = 0, /* pull-up driven by UDC */
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* SPI devices.
|
||||
*/
|
||||
static struct spi_board_info ek_spi_devices[] = {
|
||||
#if !defined(CONFIG_MMC_AT91)
|
||||
{ /* DataFlash chip */
|
||||
.modalias = "mtd_dataflash",
|
||||
.chip_select = 1,
|
||||
.max_speed_hz = 15 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
},
|
||||
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
|
||||
{ /* DataFlash card */
|
||||
.modalias = "mtd_dataflash",
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 15 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
},
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* MACB Ethernet device
|
||||
*/
|
||||
static struct at91_eth_data __initdata ek_macb_data = {
|
||||
.phy_irq_pin = AT91_PIN_PA7,
|
||||
.is_rmii = 0,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* NAND flash
|
||||
*/
|
||||
static struct mtd_partition __initdata ek_nand_partition[] = {
|
||||
{
|
||||
.name = "Bootloader Area",
|
||||
.offset = 0,
|
||||
.size = 10 * 1024 * 1024,
|
||||
},
|
||||
{
|
||||
.name = "User Area",
|
||||
.offset = 10 * 1024 * 1024,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
|
||||
{
|
||||
*num_partitions = ARRAY_SIZE(ek_nand_partition);
|
||||
return ek_nand_partition;
|
||||
}
|
||||
|
||||
static struct at91_nand_data __initdata ek_nand_data = {
|
||||
.ale = 21,
|
||||
.cle = 22,
|
||||
// .det_pin = ... not connected
|
||||
.rdy_pin = AT91_PIN_PC13,
|
||||
.enable_pin = AT91_PIN_PC14,
|
||||
.partition_info = nand_partitions,
|
||||
#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
|
||||
.bus_width_16 = 1,
|
||||
#else
|
||||
.bus_width_16 = 0,
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* MCI (SD/MMC)
|
||||
*/
|
||||
static struct at91_mmc_data __initdata ek_mmc_data = {
|
||||
.slot_b = 1,
|
||||
.wire4 = 1,
|
||||
.det_pin = AT91_PIN_PC8,
|
||||
.wp_pin = AT91_PIN_PC4,
|
||||
// .vcc_pin = ... not connected
|
||||
};
|
||||
|
||||
static void __init ek_board_init(void)
|
||||
{
|
||||
/* Serial */
|
||||
at91_add_device_serial();
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&ek_usbh_data);
|
||||
/* USB Device */
|
||||
at91_add_device_udc(&ek_udc_data);
|
||||
/* SPI */
|
||||
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
|
||||
/* NAND */
|
||||
at91_add_device_nand(&ek_nand_data);
|
||||
/* Ethernet */
|
||||
at91_add_device_eth(&ek_macb_data);
|
||||
/* MMC */
|
||||
at91_add_device_mmc(0, &ek_mmc_data);
|
||||
/* I2C */
|
||||
at91_add_device_i2c(NULL, 0);
|
||||
}
|
||||
|
||||
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
|
||||
/* Maintainer: Olimex */
|
||||
.phys_io = AT91_BASE_SYS,
|
||||
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
||||
.boot_params = AT91_SDRAM_BASE + 0x100,
|
||||
.timer = &at91sam926x_timer,
|
||||
.map_io = ek_map_io,
|
||||
.init_irq = ek_init_irq,
|
||||
.init_machine = ek_board_init,
|
||||
MACHINE_END
|
||||
Загрузка…
Ссылка в новой задаче