microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'asoc-ab8500' into for-3.6

This commit is contained in:
Mark Brown 2012-06-12 11:46:58 +08:00
Родитель a89c3e956a f242e50eee
Коммит 66e61060d7
200 изменённых файлов: 3904 добавлений и 1466 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

93
Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt Normal file
Просмотреть файл

@ -0,0 +1,93 @@
Pinctrl-based I2C Bus Mux
This binding describes an I2C bus multiplexer that uses pin multiplexing to
route the I2C signals, and represents the pin multiplexing configuration
using the pinctrl device tree bindings.
+-----+ +-----+
| dev | | dev |
+------------------------+ +-----+ +-----+
| SoC | | |
| /----|------+--------+
| +---+ +------+ | child bus A, on first set of pins
| |I2C|---|Pinmux| |
| +---+ +------+ | child bus B, on second set of pins
| \----|------+--------+--------+
| | | | |
+------------------------+ +-----+ +-----+ +-----+
| dev | | dev | | dev |
+-----+ +-----+ +-----+
Required properties:
- compatible: i2c-mux-pinctrl
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
port is connected to.
Also required are:
* Standard pinctrl properties that specify the pin mux state for each child
bus. See ../pinctrl/pinctrl-bindings.txt.
* Standard I2C mux properties. See mux.txt in this directory.
* I2C child bus nodes. See mux.txt in this directory.
For each named state defined in the pinctrl-names property, an I2C child bus
will be created. I2C child bus numbers are assigned based on the index into
the pinctrl-names property.
The only exception is that no bus will be created for a state named "idle". If
such a state is defined, it must be the last entry in pinctrl-names. For
example:
pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
Whenever an access is made to a device on a child bus, the relevant pinctrl
state will be programmed into hardware.
If an idle state is defined, whenever an access is not being made to a device
on a child bus, the idle pinctrl state will be programmed into hardware.
If an idle state is not defined, the most recently used pinctrl state will be
left programmed into hardware whenever no access is being made of a device on
a child bus.
Example:
i2cmux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c1>;
pinctrl-names = "ddc", "pta", "idle";
pinctrl-0 = <&state_i2cmux_ddc>;
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom {
compatible = "eeprom";
reg = <0x50>;
};
};
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
eeprom {
compatible = "eeprom";
reg = <0x50>;
};
};
};

9
Documentation/kernel-parameters.txt
Просмотреть файл

@ -2543,6 +2543,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
sched_debug [KNL] Enables verbose scheduler debug messages.
skew_tick= [KNL] Offset the periodic timer tick per cpu to mitigate
xtime_lock contention on larger systems, and/or RCU lock
contention on all systems with CONFIG_MAXSMP set.
Format: { "0" | "1" }
0 -- disable. (may be 1 via CONFIG_CMDLINE="skew_tick=1"
1 -- enable.
Note: increases power consumption, thus should only be
enabled if running jitter sensitive (HPC/RT) workloads.
security= [SECURITY] Choose a security module to enable at boot.
If this boot parameter is not specified, only the first
security module asking for security registration will be

278
Documentation/vm/frontswap.txt Normal file
Просмотреть файл

@ -0,0 +1,278 @@
Frontswap provides a "transcendent memory" interface for swap pages.
In some environments, dramatic performance savings may be obtained because
swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk.
(Note, frontswap -- and cleancache (merged at 3.0) -- are the "frontends"
and the only necessary changes to the core kernel for transcendent memory;
all other supporting code -- the "backends" -- is implemented as drivers.
See the LWN.net article "Transcendent memory in a nutshell" for a detailed
overview of frontswap and related kernel parts:
https://lwn.net/Articles/454795/ )
Frontswap is so named because it can be thought of as the opposite of
a "backing" store for a swap device. The storage is assumed to be
a synchronous concurrency-safe page-oriented "pseudo-RAM device" conforming
to the requirements of transcendent memory (such as Xen's "tmem", or
in-kernel compressed memory, aka "zcache", or future RAM-like devices);
this pseudo-RAM device is not directly accessible or addressable by the
kernel and is of unknown and possibly time-varying size. The driver
links itself to frontswap by calling frontswap_register_ops to set the
frontswap_ops funcs appropriately and the functions it provides must
conform to certain policies as follows:
An "init" prepares the device to receive frontswap pages associated
with the specified swap device number (aka "type"). A "store" will
copy the page to transcendent memory and associate it with the type and
offset associated with the page. A "load" will copy the page, if found,
from transcendent memory into kernel memory, but will NOT remove the page
from from transcendent memory. An "invalidate_page" will remove the page
from transcendent memory and an "invalidate_area" will remove ALL pages
associated with the swap type (e.g., like swapoff) and notify the "device"
to refuse further stores with that swap type.
Once a page is successfully stored, a matching load on the page will normally
succeed. So when the kernel finds itself in a situation where it needs
to swap out a page, it first attempts to use frontswap. If the store returns
success, the data has been successfully saved to transcendent memory and
a disk write and, if the data is later read back, a disk read are avoided.
If a store returns failure, transcendent memory has rejected the data, and the
page can be written to swap as usual.
If a backend chooses, frontswap can be configured as a "writethrough
cache" by calling frontswap_writethrough(). In this mode, the reduction
in swap device writes is lost (and also a non-trivial performance advantage)
in order to allow the backend to arbitrarily "reclaim" space used to
store frontswap pages to more completely manage its memory usage.
Note that if a page is stored and the page already exists in transcendent memory
(a "duplicate" store), either the store succeeds and the data is overwritten,
or the store fails AND the page is invalidated. This ensures stale data may
never be obtained from frontswap.
If properly configured, monitoring of frontswap is done via debugfs in
the /sys/kernel/debug/frontswap directory. The effectiveness of
frontswap can be measured (across all swap devices) with:
failed_stores - how many store attempts have failed
loads - how many loads were attempted (all should succeed)
succ_stores - how many store attempts have succeeded
invalidates - how many invalidates were attempted
A backend implementation may provide additional metrics.
FAQ
1) Where's the value?
When a workload starts swapping, performance falls through the floor.
Frontswap significantly increases performance in many such workloads by
providing a clean, dynamic interface to read and write swap pages to
"transcendent memory" that is otherwise not directly addressable to the kernel.
This interface is ideal when data is transformed to a different form
and size (such as with compression) or secretly moved (as might be
useful for write-balancing for some RAM-like devices). Swap pages (and
evicted page-cache pages) are a great use for this kind of slower-than-RAM-
but-much-faster-than-disk "pseudo-RAM device" and the frontswap (and
cleancache) interface to transcendent memory provides a nice way to read
and write -- and indirectly "name" -- the pages.
Frontswap -- and cleancache -- with a fairly small impact on the kernel,
provides a huge amount of flexibility for more dynamic, flexible RAM
utilization in various system configurations:
In the single kernel case, aka "zcache", pages are compressed and
stored in local memory, thus increasing the total anonymous pages
that can be safely kept in RAM. Zcache essentially trades off CPU
cycles used in compression/decompression for better memory utilization.
Benchmarks have shown little or no impact when memory pressure is
low while providing a significant performance improvement (25%+)
on some workloads under high memory pressure.
"RAMster" builds on zcache by adding "peer-to-peer" transcendent memory
support for clustered systems. Frontswap pages are locally compressed
as in zcache, but then "remotified" to another system's RAM. This
allows RAM to be dynamically load-balanced back-and-forth as needed,
i.e. when system A is overcommitted, it can swap to system B, and
vice versa. RAMster can also be configured as a memory server so
many servers in a cluster can swap, dynamically as needed, to a single
server configured with a large amount of RAM... without pre-configuring
how much of the RAM is available for each of the clients!
In the virtual case, the whole point of virtualization is to statistically
multiplex physical resources acrosst the varying demands of multiple
virtual machines. This is really hard to do with RAM and efforts to do
it well with no kernel changes have essentially failed (except in some
well-publicized special-case workloads).
Specifically, the Xen Transcendent Memory backend allows otherwise
"fallow" hypervisor-owned RAM to not only be "time-shared" between multiple
virtual machines, but the pages can be compressed and deduplicated to
optimize RAM utilization. And when guest OS's are induced to surrender
underutilized RAM (e.g. with "selfballooning"), sudden unexpected
memory pressure may result in swapping; frontswap allows those pages
to be swapped to and from hypervisor RAM (if overall host system memory
conditions allow), thus mitigating the potentially awful performance impact
of unplanned swapping.
A KVM implementation is underway and has been RFC'ed to lkml. And,
using frontswap, investigation is also underway on the use of NVM as
a memory extension technology.
2) Sure there may be performance advantages in some situations, but
what's the space/time overhead of frontswap?
If CONFIG_FRONTSWAP is disabled, every frontswap hook compiles into
nothingness and the only overhead is a few extra bytes per swapon'ed
swap device. If CONFIG_FRONTSWAP is enabled but no frontswap "backend"
registers, there is one extra global variable compared to zero for
every swap page read or written. If CONFIG_FRONTSWAP is enabled
AND a frontswap backend registers AND the backend fails every "store"
request (i.e. provides no memory despite claiming it might),
CPU overhead is still negligible -- and since every frontswap fail
precedes a swap page write-to-disk, the system is highly likely
to be I/O bound and using a small fraction of a percent of a CPU
will be irrelevant anyway.
As for space, if CONFIG_FRONTSWAP is enabled AND a frontswap backend
registers, one bit is allocated for every swap page for every swap
device that is swapon'd. This is added to the EIGHT bits (which
was sixteen until about 2.6.34) that the kernel already allocates
for every swap page for every swap device that is swapon'd. (Hugh
Dickins has observed that frontswap could probably steal one of
the existing eight bits, but let's worry about that minor optimization
later.) For very large swap disks (which are rare) on a standard
4K pagesize, this is 1MB per 32GB swap.
When swap pages are stored in transcendent memory instead of written
out to disk, there is a side effect that this may create more memory
pressure that can potentially outweigh the other advantages. A
backend, such as zcache, must implement policies to carefully (but
dynamically) manage memory limits to ensure this doesn't happen.
3) OK, how about a quick overview of what this frontswap patch does
in terms that a kernel hacker can grok?
Let's assume that a frontswap "backend" has registered during
kernel initialization; this registration indicates that this
frontswap backend has access to some "memory" that is not directly
accessible by the kernel. Exactly how much memory it provides is
entirely dynamic and random.
Whenever a swap-device is swapon'd frontswap_init() is called,
passing the swap device number (aka "type") as a parameter.
This notifies frontswap to expect attempts to "store" swap pages
associated with that number.
Whenever the swap subsystem is readying a page to write to a swap
device (c.f swap_writepage()), frontswap_store is called. Frontswap
consults with the frontswap backend and if the backend says it does NOT
have room, frontswap_store returns -1 and the kernel swaps the page
to the swap device as normal. Note that the response from the frontswap
backend is unpredictable to the kernel; it may choose to never accept a
page, it could accept every ninth page, or it might accept every
page. But if the backend does accept a page, the data from the page
has already been copied and associated with the type and offset,
and the backend guarantees the persistence of the data. In this case,
frontswap sets a bit in the "frontswap_map" for the swap device
corresponding to the page offset on the swap device to which it would
otherwise have written the data.
When the swap subsystem needs to swap-in a page (swap_readpage()),
it first calls frontswap_load() which checks the frontswap_map to
see if the page was earlier accepted by the frontswap backend. If
it was, the page of data is filled from the frontswap backend and
the swap-in is complete. If not, the normal swap-in code is
executed to obtain the page of data from the real swap device.
So every time the frontswap backend accepts a page, a swap device read
and (potentially) a swap device write are replaced by a "frontswap backend
store" and (possibly) a "frontswap backend loads", which are presumably much
faster.
4) Can't frontswap be configured as a "special" swap device that is
just higher priority than any real swap device (e.g. like zswap,
or maybe swap-over-nbd/NFS)?
No. First, the existing swap subsystem doesn't allow for any kind of
swap hierarchy. Perhaps it could be rewritten to accomodate a hierarchy,
but this would require fairly drastic changes. Even if it were
rewritten, the existing swap subsystem uses the block I/O layer which
assumes a swap device is fixed size and any page in it is linearly
addressable. Frontswap barely touches the existing swap subsystem,
and works around the constraints of the block I/O subsystem to provide
a great deal of flexibility and dynamicity.
For example, the acceptance of any swap page by the frontswap backend is
entirely unpredictable. This is critical to the definition of frontswap
backends because it grants completely dynamic discretion to the
backend. In zcache, one cannot know a priori how compressible a page is.
"Poorly" compressible pages can be rejected, and "poorly" can itself be
defined dynamically depending on current memory constraints.
Further, frontswap is entirely synchronous whereas a real swap
device is, by definition, asynchronous and uses block I/O. The
block I/O layer is not only unnecessary, but may perform "optimizations"
that are inappropriate for a RAM-oriented device including delaying
the write of some pages for a significant amount of time. Synchrony is
required to ensure the dynamicity of the backend and to avoid thorny race
conditions that would unnecessarily and greatly complicate frontswap
and/or the block I/O subsystem. That said, only the initial "store"
and "load" operations need be synchronous. A separate asynchronous thread
is free to manipulate the pages stored by frontswap. For example,
the "remotification" thread in RAMster uses standard asynchronous
kernel sockets to move compressed frontswap pages to a remote machine.
Similarly, a KVM guest-side implementation could do in-guest compression
and use "batched" hypercalls.
In a virtualized environment, the dynamicity allows the hypervisor
(or host OS) to do "intelligent overcommit". For example, it can
choose to accept pages only until host-swapping might be imminent,
then force guests to do their own swapping.
There is a downside to the transcendent memory specifications for
frontswap: Since any "store" might fail, there must always be a real
slot on a real swap device to swap the page. Thus frontswap must be
implemented as a "shadow" to every swapon'd device with the potential
capability of holding every page that the swap device might have held
and the possibility that it might hold no pages at all. This means
that frontswap cannot contain more pages than the total of swapon'd
swap devices. For example, if NO swap device is configured on some
installation, frontswap is useless. Swapless portable devices
can still use frontswap but a backend for such devices must configure
some kind of "ghost" swap device and ensure that it is never used.
5) Why this weird definition about "duplicate stores"? If a page
has been previously successfully stored, can't it always be
successfully overwritten?
Nearly always it can, but no, sometimes it cannot. Consider an example
where data is compressed and the original 4K page has been compressed
to 1K. Now an attempt is made to overwrite the page with data that
is non-compressible and so would take the entire 4K. But the backend
has no more space. In this case, the store must be rejected. Whenever
frontswap rejects a store that would overwrite, it also must invalidate
the old data and ensure that it is no longer accessible. Since the
swap subsystem then writes the new data to the read swap device,
this is the correct course of action to ensure coherency.
6) What is frontswap_shrink for?
When the (non-frontswap) swap subsystem swaps out a page to a real
swap device, that page is only taking up low-value pre-allocated disk
space. But if frontswap has placed a page in transcendent memory, that
page may be taking up valuable real estate. The frontswap_shrink
routine allows code outside of the swap subsystem to force pages out
of the memory managed by frontswap and back into kernel-addressable memory.
For example, in RAMster, a "suction driver" thread will attempt
to "repatriate" pages sent to a remote machine back to the local machine;
this is driven using the frontswap_shrink mechanism when memory pressure
subsides.
7) Why does the frontswap patch create the new include file swapfile.h?
The frontswap code depends on some swap-subsystem-internal data
structures that have, over the years, moved back and forth between
static and global. This seemed a reasonable compromise: Define
them as global but declare them in a new include file that isn't
included by the large number of source files that include swap.h.
Dan Magenheimer, last updated April 9, 2012

50
MAINTAINERS
Просмотреть файл

@ -1077,7 +1077,7 @@ F: drivers/media/video/s5p-fimc/
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Kamil Debski <k.debski@samsung.com>
M: Jeongtae Park <jtp.park@samsung.com>
M: Jeongtae Park <jtp.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
@ -1743,10 +1743,10 @@ F: include/linux/can/platform/
CAPABILITIES
M: Serge Hallyn <serge.hallyn@canonical.com>
L: linux-security-module@vger.kernel.org
S: Supported
S: Supported
F: include/linux/capability.h
F: security/capability.c
F: security/commoncap.c
F: security/commoncap.c
F: kernel/capability.c
CELL BROADBAND ENGINE ARCHITECTURE
@ -2146,11 +2146,11 @@ S: Orphan
F: drivers/net/wan/pc300*
CYTTSP TOUCHSCREEN DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/input/touchscreen/cyttsp*
F: include/linux/input/cyttsp.h
M: Javier Martinez Canillas <javier@dowhile0.org>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/input/touchscreen/cyttsp*
F: include/linux/input/cyttsp.h
DAMA SLAVE for AX.25
M: Joerg Reuter <jreuter@yaina.de>
@ -2270,7 +2270,7 @@ F: include/linux/device-mapper.h
F: include/linux/dm-*.h
DIOLAN U2C-12 I2C DRIVER
M: Guenter Roeck <guenter.roeck@ericsson.com>
M: Guenter Roeck <linux@roeck-us.net>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-diolan-u2c.c
@ -2930,6 +2930,13 @@ F: Documentation/power/freezing-of-tasks.txt
F: include/linux/freezer.h
F: kernel/freezer.c
FRONTSWAP API
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: mm/frontswap.c
F: include/linux/frontswap.h
FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
M: David Howells <dhowells@redhat.com>
L: linux-cachefs@redhat.com
@ -3138,7 +3145,7 @@ F: drivers/tty/hvc/
HARDWARE MONITORING
M: Jean Delvare <khali@linux-fr.org>
M: Guenter Roeck <guenter.roeck@ericsson.com>
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
@ -4096,6 +4103,8 @@ F: drivers/scsi/53c700*
LED SUBSYSTEM
M: Bryan Wu <bryan.wu@canonical.com>
M: Richard Purdie <rpurdie@rpsys.net>
L: linux-leds@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
S: Maintained
F: drivers/leds/
F: include/linux/leds.h
@ -4411,6 +4420,13 @@ S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
MAX16065 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max16065
F: drivers/hwmon/max16065.c
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: "Hans J. Koch" <hjk@hansjkoch.de>
L: lm-sensors@lm-sensors.org
@ -5149,7 +5165,7 @@ F: drivers/leds/leds-pca9532.c
F: include/linux/leds-pca9532.h
PCA9541 I2C BUS MASTER SELECTOR DRIVER
M: Guenter Roeck <guenter.roeck@ericsson.com>
M: Guenter Roeck <linux@roeck-us.net>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/muxes/i2c-mux-pca9541.c
@ -5169,7 +5185,7 @@ S: Maintained
F: drivers/firmware/pcdp.*
PCI ERROR RECOVERY
M: Linas Vepstas <linasvepstas@gmail.com>
M: Linas Vepstas <linasvepstas@gmail.com>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
@ -5299,7 +5315,7 @@ F: drivers/video/fb-puv3.c
F: drivers/rtc/rtc-puv3.c
PMBUS HARDWARE MONITORING DRIVERS
M: Guenter Roeck <guenter.roeck@ericsson.com>
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
W: http://www.roeck-us.net/linux/drivers/
@ -7293,11 +7309,11 @@ F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/
F: include/linux/uio*.h
UTIL-LINUX-NG PACKAGE
UTIL-LINUX PACKAGE
M: Karel Zak <kzak@redhat.com>
L: util-linux-ng@vger.kernel.org
W: http://kernel.org/~kzak/util-linux-ng/
T: git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
L: util-linux@vger.kernel.org
W: http://en.wikipedia.org/wiki/Util-linux
T: git git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git
S: Maintained
UVESAFB DRIVER

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc2
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

1
arch/arm/Kconfig
Просмотреть файл

@ -7,7 +7,6 @@ config ARM
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
select CMA if (CPU_V6 || CPU_V6K || CPU_V7)
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION

6
arch/arm/mach-shmobile/Kconfig
Просмотреть файл

@ -186,6 +186,12 @@ config SH_TIMER_TMU
help
This enables build of the TMU timer driver.
config EM_TIMER_STI
bool "STI timer driver"
default y
help
This enables build of the STI timer driver.
endmenu
config SH_CLK_CPG

14
arch/arm/mach-ux500/board-mop500.c
Просмотреть файл

@ -25,6 +25,7 @@
#include <linux/mfd/tc3589x.h>
#include <linux/mfd/tps6105x.h>
#include <linux/mfd/abx500/ab8500-gpio.h>
#include <linux/mfd/abx500/ab8500-codec.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
#include <linux/smsc911x.h>
@ -97,6 +98,18 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
0x7A, 0x00, 0x00},
};
/* ab8500-codec */
static struct ab8500_codec_platform_data ab8500_codec_pdata = {
.amics = {
.mic1_type = AMIC_TYPE_DIFFERENTIAL,
.mic2_type = AMIC_TYPE_DIFFERENTIAL,
.mic1a_micbias = AMIC_MICBIAS_VAMIC1,
.mic1b_micbias = AMIC_MICBIAS_VAMIC1,
.mic2_micbias = AMIC_MICBIAS_VAMIC2
},
.ear_cmv = EAR_CMV_0_95V
};
static struct gpio_keys_button snowball_key_array[] = {
{
.gpio = 32,
@ -195,6 +208,7 @@ static struct ab8500_platform_data ab8500_platdata = {
.regulator = ab8500_regulators,
.num_regulator = ARRAY_SIZE(ab8500_regulators),
.gpio = &ab8500_gpio_pdata,
.codec = &ab8500_codec_pdata,
};
static struct resource ab8500_resources[] = {

10
arch/arm/mm/dma-mapping.c
Просмотреть файл

@ -268,10 +268,8 @@ static int __init consistent_init(void)
unsigned long base = consistent_base;
unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
#ifndef CONFIG_ARM_DMA_USE_IOMMU
if (cpu_architecture() >= CPU_ARCH_ARMv6)
if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
return 0;
#endif
consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
if (!consistent_pte) {
@ -342,7 +340,7 @@ static int __init coherent_init(void)
struct page *page;
void *ptr;
if (cpu_architecture() < CPU_ARCH_ARMv6)
if (!IS_ENABLED(CONFIG_CMA))
return 0;
ptr = __alloc_from_contiguous(NULL, size, prot, &page);
@ -704,7 +702,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
if (arch_is_coherent() || nommu())
addr = __alloc_simple_buffer(dev, size, gfp, &page);
else if (cpu_architecture() < CPU_ARCH_ARMv6)
else if (!IS_ENABLED(CONFIG_CMA))
addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
else if (gfp & GFP_ATOMIC)
addr = __alloc_from_pool(dev, size, &page, caller);
@ -773,7 +771,7 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
if (arch_is_coherent() || nommu()) {
__dma_free_buffer(page, size);
} else if (cpu_architecture() < CPU_ARCH_ARMv6) {
} else if (!IS_ENABLED(CONFIG_CMA)) {
__dma_free_remap(cpu_addr, size);
__dma_free_buffer(page, size);
} else {

2
arch/avr32/kernel/signal.c
Просмотреть файл

@ -300,7 +300,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti)
if ((sysreg_read(SR) & MODE_MASK) == MODE_SUPERVISOR)
syscall = 1;
if (ti->flags & _TIF_SIGPENDING))
if (ti->flags & _TIF_SIGPENDING)
do_signal(regs, syscall);
if (ti->flags & _TIF_NOTIFY_RESUME) {

2
arch/blackfin/kernel/process.c
Просмотреть файл

@ -173,7 +173,7 @@ asmlinkage int bfin_clone(struct pt_regs *regs)
unsigned long newsp;
#ifdef __ARCH_SYNC_CORE_DCACHE
if (current->rt.nr_cpus_allowed == num_possible_cpus())
if (current->nr_cpus_allowed == num_possible_cpus())
set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id()));
#endif

3
arch/parisc/Makefile
Просмотреть файл

@ -21,6 +21,7 @@ KBUILD_DEFCONFIG := default_defconfig
NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
MACHINE := $(shell uname -m)
ifeq ($(MACHINE),parisc*)
@ -79,7 +80,7 @@ kernel-y := mm/ kernel/ math-emu/
kernel-$(CONFIG_HPUX) += hpux/
core-y += $(addprefix arch/parisc/, $(kernel-y))
libs-y += arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
libs-y += arch/parisc/lib/ $(LIBGCC)
drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/

1
arch/parisc/include/asm/Kbuild
Просмотреть файл

@ -1,3 +1,4 @@
include include/asm-generic/Kbuild.asm
header-y += pdc.h
generic-y += word-at-a-time.h

2
arch/parisc/include/asm/bug.h
Просмотреть файл

@ -1,6 +1,8 @@
#ifndef _PARISC_BUG_H
#define _PARISC_BUG_H
#include <linux/kernel.h> /* for BUGFLAG_TAINT */
/*
* Tell the user there is some problem.
* The offending file and line are encoded in the __bug_table section.

11
arch/powerpc/kernel/module_32.c
Просмотреть файл

@ -176,8 +176,8 @@ int module_frob_arch_sections(Elf32_Ehdr *hdr,
static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
{
if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
&& entry->jump[1] == 0x396b0000 + (val & 0xffff))
if (entry->jump[0] == 0x3d800000 + ((val + 0x8000) >> 16)
&& entry->jump[1] == 0x398c0000 + (val & 0xffff))
return 1;
return 0;
}
@ -204,10 +204,9 @@ static uint32_t do_plt_call(void *location,
entry++;
}
/* Stolen from Paul Mackerras as well... */
entry->jump[0] = 0x3d600000+((val+0x8000)>>16); /* lis r11,sym@ha */
entry->jump[1] = 0x396b0000 + (val&0xffff); /* addi r11,r11,sym@l*/
entry->jump[2] = 0x7d6903a6; /* mtctr r11 */
entry->jump[0] = 0x3d800000+((val+0x8000)>>16); /* lis r12,sym@ha */
entry->jump[1] = 0x398c0000 + (val&0xffff); /* addi r12,r12,sym@l*/
entry->jump[2] = 0x7d8903a6; /* mtctr r12 */
entry->jump[3] = 0x4e800420; /* bctr */
DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);

14
arch/powerpc/kernel/time.c
Просмотреть файл

@ -475,6 +475,7 @@ void timer_interrupt(struct pt_regs * regs)
struct pt_regs *old_regs;
u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
struct clock_event_device *evt = &__get_cpu_var(decrementers);
u64 now;
/* Ensure a positive value is written to the decrementer, or else
* some CPUs will continue to take decrementer exceptions.
@ -509,9 +510,16 @@ void timer_interrupt(struct pt_regs * regs)
irq_work_run();
}
*next_tb = ~(u64)0;
if (evt->event_handler)
evt->event_handler(evt);
now = get_tb_or_rtc();
if (now >= *next_tb) {
*next_tb = ~(u64)0;
if (evt->event_handler)
evt->event_handler(evt);
} else {
now = *next_tb - now;
if (now <= DECREMENTER_MAX)
set_dec((int)now);
}
#ifdef CONFIG_PPC64
/* collect purr register values often, for accurate calculations */

5
arch/tile/include/asm/thread_info.h
Просмотреть файл

@ -91,11 +91,6 @@ extern void smp_nap(void);
/* Enable interrupts racelessly and nap forever: helper for cpu_idle(). */
extern void _cpu_idle(void);
/* Switch boot idle thread to a freshly-allocated stack and free old stack. */
extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
unsigned long new_sp,
unsigned long new_ss10);
#else /* __ASSEMBLY__ */
/*

14
arch/tile/kernel/entry.S
Просмотреть файл

@ -68,20 +68,6 @@ STD_ENTRY(KBacktraceIterator_init_current)
jrp lr /* keep backtracer happy */
STD_ENDPROC(KBacktraceIterator_init_current)
/*
* Reset our stack to r1/r2 (sp and ksp0+cpu respectively), then
* free the old stack (passed in r0) and re-invoke cpu_idle().
* We update sp and ksp0 simultaneously to avoid backtracer warnings.
*/
STD_ENTRY(cpu_idle_on_new_stack)
{
move sp, r1
mtspr SPR_SYSTEM_SAVE_K_0, r2
}
jal free_thread_info
j cpu_idle
STD_ENDPROC(cpu_idle_on_new_stack)
/* Loop forever on a nap during SMP boot. */
STD_ENTRY(smp_nap)
nap

1
arch/tile/kernel/setup.c
Просмотреть файл

@ -29,6 +29,7 @@
#include <linux/smp.h>
#include <linux/timex.h>
#include <linux/hugetlb.h>
#include <linux/start_kernel.h>
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/cacheflush.h>

42
arch/x86/boot/header.S
Просмотреть файл

@ -94,10 +94,10 @@ bs_die:
.section ".bsdata", "a"
bugger_off_msg:
.ascii "Direct booting from floppy is no longer supported.\r\n"
.ascii "Please use a boot loader program instead.\r\n"
.ascii "Direct floppy boot is not supported. "
.ascii "Use a boot loader program instead.\r\n"
.ascii "\n"
.ascii "Remove disk and press any key to reboot . . .\r\n"
.ascii "Remove disk and press any key to reboot ...\r\n"
.byte 0
#ifdef CONFIG_EFI_STUB
@ -111,7 +111,7 @@ coff_header:
#else
.word 0x8664 # x86-64
#endif
.word 2 # nr_sections
.word 3 # nr_sections
.long 0 # TimeDateStamp
.long 0 # PointerToSymbolTable
.long 1 # NumberOfSymbols
@ -158,8 +158,8 @@ extra_header_fields:
#else
.quad 0 # ImageBase
#endif
.long 0x1000 # SectionAlignment
.long 0x200 # FileAlignment
.long 0x20 # SectionAlignment
.long 0x20 # FileAlignment
.word 0 # MajorOperatingSystemVersion
.word 0 # MinorOperatingSystemVersion
.word 0 # MajorImageVersion
@ -200,8 +200,10 @@ extra_header_fields:
# Section table
section_table:
.ascii ".text"
.byte 0
#
# The offset & size fields are filled in by build.c.
#
.ascii ".setup"
.byte 0
.byte 0
.long 0
@ -217,9 +219,8 @@ section_table:
#
# The EFI application loader requires a relocation section
# because EFI applications must be relocatable. But since
# we don't need the loader to fixup any relocs for us, we
# just create an empty (zero-length) .reloc section header.
# because EFI applications must be relocatable. The .reloc
# offset & size fields are filled in by build.c.
#
.ascii ".reloc"
.byte 0
@ -233,6 +234,25 @@ section_table:
.word 0 # NumberOfRelocations
.word 0 # NumberOfLineNumbers
.long 0x42100040 # Characteristics (section flags)
#
# The offset & size fields are filled in by build.c.
#
.ascii ".text"
.byte 0
.byte 0
.byte 0
.long 0
.long 0x0 # startup_{32,64}
.long 0 # Size of initialized data
# on disk
.long 0x0 # startup_{32,64}
.long 0 # PointerToRelocations
.long 0 # PointerToLineNumbers
.word 0 # NumberOfRelocations
.word 0 # NumberOfLineNumbers
.long 0x60500020 # Characteristics (section flags)
#endif /* CONFIG_EFI_STUB */
# Kernel attributes; used by setup. This is part 1 of the

172
arch/x86/boot/tools/build.c
Просмотреть файл

@ -50,6 +50,8 @@ typedef unsigned int u32;
u8 buf[SETUP_SECT_MAX*512];
int is_big_kernel;
#define PECOFF_RELOC_RESERVE 0x20
/*----------------------------------------------------------------------*/
static const u32 crctab32[] = {
@ -133,11 +135,103 @@ static void usage(void)
die("Usage: build setup system [> image]");
}
#ifdef CONFIG_EFI_STUB
static void update_pecoff_section_header(char *section_name, u32 offset, u32 size)
{
unsigned int pe_header;
unsigned short num_sections;
u8 *section;
pe_header = get_unaligned_le32(&buf[0x3c]);
num_sections = get_unaligned_le16(&buf[pe_header + 6]);
#ifdef CONFIG_X86_32
section = &buf[pe_header + 0xa8];
#else
section = &buf[pe_header + 0xb8];
#endif
while (num_sections > 0) {
if (strncmp((char*)section, section_name, 8) == 0) {
/* section header size field */
put_unaligned_le32(size, section + 0x8);
/* section header vma field */
put_unaligned_le32(offset, section + 0xc);
/* section header 'size of initialised data' field */
put_unaligned_le32(size, section + 0x10);
/* section header 'file offset' field */
put_unaligned_le32(offset, section + 0x14);
break;
}
section += 0x28;
num_sections--;
}
}
static void update_pecoff_setup_and_reloc(unsigned int size)
{
u32 setup_offset = 0x200;
u32 reloc_offset = size - PECOFF_RELOC_RESERVE;
u32 setup_size = reloc_offset - setup_offset;
update_pecoff_section_header(".setup", setup_offset, setup_size);
update_pecoff_section_header(".reloc", reloc_offset, PECOFF_RELOC_RESERVE);
/*
* Modify .reloc section contents with a single entry. The
* relocation is applied to offset 10 of the relocation section.
*/
put_unaligned_le32(reloc_offset + 10, &buf[reloc_offset]);
put_unaligned_le32(10, &buf[reloc_offset + 4]);
}
static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
{
unsigned int pe_header;
unsigned int text_sz = file_sz - text_start;
pe_header = get_unaligned_le32(&buf[0x3c]);
/* Size of image */
put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
/*
* Size of code: Subtract the size of the first sector (512 bytes)
* which includes the header.
*/
put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]);
#ifdef CONFIG_X86_32
/*
* Address of entry point.
*
* The EFI stub entry point is +16 bytes from the start of
* the .text section.
*/
put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]);
#else
/*
* Address of entry point. startup_32 is at the beginning and
* the 64-bit entry point (startup_64) is always 512 bytes
* after. The EFI stub entry point is 16 bytes after that, as
* the first instruction allows legacy loaders to jump over
* the EFI stub initialisation
*/
put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]);
#endif /* CONFIG_X86_32 */
update_pecoff_section_header(".text", text_start, text_sz);
}
#endif /* CONFIG_EFI_STUB */
int main(int argc, char ** argv)
{
#ifdef CONFIG_EFI_STUB
unsigned int file_sz, pe_header;
#endif
unsigned int i, sz, setup_sectors;
int c;
u32 sys_size;
@ -163,6 +257,12 @@ int main(int argc, char ** argv)
die("Boot block hasn't got boot flag (0xAA55)");
fclose(file);
#ifdef CONFIG_EFI_STUB
/* Reserve 0x20 bytes for .reloc section */
memset(buf+c, 0, PECOFF_RELOC_RESERVE);
c += PECOFF_RELOC_RESERVE;
#endif
/* Pad unused space with zeros */
setup_sectors = (c + 511) / 512;
if (setup_sectors < SETUP_SECT_MIN)
@ -170,6 +270,10 @@ int main(int argc, char ** argv)
i = setup_sectors*512;
memset(buf+c, 0, i-c);
#ifdef CONFIG_EFI_STUB
update_pecoff_setup_and_reloc(i);
#endif
/* Set the default root device */
put_unaligned_le16(DEFAULT_ROOT_DEV, &buf[508]);
@ -194,66 +298,8 @@ int main(int argc, char ** argv)
put_unaligned_le32(sys_size, &buf[0x1f4]);
#ifdef CONFIG_EFI_STUB
file_sz = sz + i + ((sys_size * 16) - sz);
pe_header = get_unaligned_le32(&buf[0x3c]);
/* Size of image */
put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);
/*
* Subtract the size of the first section (512 bytes) which
* includes the header and .reloc section. The remaining size
* is that of the .text section.
*/
file_sz -= 512;
/* Size of code */
put_unaligned_le32(file_sz, &buf[pe_header + 0x1c]);
#ifdef CONFIG_X86_32
/*
* Address of entry point.
*
* The EFI stub entry point is +16 bytes from the start of
* the .text section.
*/
put_unaligned_le32(i + 16, &buf[pe_header + 0x28]);
/* .text size */
put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]);
/* .text vma */
put_unaligned_le32(0x200, &buf[pe_header + 0xb4]);
/* .text size of initialised data */
put_unaligned_le32(file_sz, &buf[pe_header + 0xb8]);
/* .text file offset */
put_unaligned_le32(0x200, &buf[pe_header + 0xbc]);
#else
/*
* Address of entry point. startup_32 is at the beginning and
* the 64-bit entry point (startup_64) is always 512 bytes
* after. The EFI stub entry point is 16 bytes after that, as
* the first instruction allows legacy loaders to jump over
* the EFI stub initialisation
*/
put_unaligned_le32(i + 528, &buf[pe_header + 0x28]);
/* .text size */
put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]);
/* .text vma */
put_unaligned_le32(0x200, &buf[pe_header + 0xc4]);
/* .text size of initialised data */
put_unaligned_le32(file_sz, &buf[pe_header + 0xc8]);
/* .text file offset */
put_unaligned_le32(0x200, &buf[pe_header + 0xcc]);
#endif /* CONFIG_X86_32 */
#endif /* CONFIG_EFI_STUB */
update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
#endif
crc = partial_crc32(buf, i, crc);
if (fwrite(buf, 1, i, stdout) != i)

14
arch/x86/include/asm/nmi.h
Просмотреть файл

@ -54,6 +54,20 @@ struct nmiaction {
__register_nmi_handler((t), &fn##_na); \
})
/*
* For special handlers that register/unregister in the
* init section only. This should be considered rare.
*/
#define register_nmi_handler_initonly(t, fn, fg, n) \
({ \
static struct nmiaction fn##_na __initdata = { \
.handler = (fn), \
.name = (n), \
.flags = (fg), \
}; \
__register_nmi_handler((t), &fn##_na); \
})
int __register_nmi_handler(unsigned int, struct nmiaction *);
void unregister_nmi_handler(unsigned int, const char *);

12
arch/x86/include/asm/uaccess.h
Просмотреть файл

@ -33,9 +33,8 @@
#define segment_eq(a, b) ((a).seg == (b).seg)
#define user_addr_max() (current_thread_info()->addr_limit.seg)
#define __addr_ok(addr) \
((unsigned long __force)(addr) < \
(current_thread_info()->addr_limit.seg))
#define __addr_ok(addr) \
((unsigned long __force)(addr) < user_addr_max())
/*
* Test whether a block of memory is a valid user space address.
@ -47,14 +46,14 @@
* This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
*/
#define __range_not_ok(addr, size) \
#define __range_not_ok(addr, size, limit) \
({ \
unsigned long flag, roksum; \
__chk_user_ptr(addr); \
asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0" \
: "=&r" (flag), "=r" (roksum) \
: "1" (addr), "g" ((long)(size)), \
"rm" (current_thread_info()->addr_limit.seg)); \
"rm" (limit)); \
flag; \
})
@ -77,7 +76,8 @@
* checks that the pointer is in the user space range - after calling
* this function, memory access functions may still return -EFAULT.
*/
#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
#define access_ok(type, addr, size) \
(likely(__range_not_ok(addr, size, user_addr_max()) == 0))
/*
* The exception table consists of pairs of addresses relative to the

1
arch/x86/include/asm/uv/uv_bau.h
Просмотреть файл

@ -149,7 +149,6 @@
/* 4 bits of software ack period */
#define UV2_ACK_MASK 0x7UL
#define UV2_ACK_UNITS_SHFT 3
#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
/*

6
arch/x86/kernel/aperture_64.c
Просмотреть файл

@ -20,7 +20,6 @@
#include <linux/bitops.h>
#include <linux/ioport.h>
#include <linux/suspend.h>
#include <linux/kmemleak.h>
#include <asm/e820.h>
#include <asm/io.h>
#include <asm/iommu.h>
@ -95,11 +94,6 @@ static u32 __init allocate_aperture(void)
return 0;
}
memblock_reserve(addr, aper_size);
/*
* Kmemleak should not scan this block as it may not be mapped via the
* kernel direct mapping.
*/
kmemleak_ignore(phys_to_virt(addr));
printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n",
aper_size >> 10, addr);
insert_aperture_resource((u32)addr, aper_size);

4
arch/x86/kernel/apic/io_apic.c
Просмотреть файл

@ -1195,7 +1195,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
BUG_ON(!cfg->vector);
vector = cfg->vector;
for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
for_each_cpu(cpu, cfg->domain)
per_cpu(vector_irq, cpu)[vector] = -1;
cfg->vector = 0;
@ -1203,7 +1203,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
if (likely(!cfg->move_in_progress))
return;
for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
for_each_cpu(cpu, cfg->old_domain) {
for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
vector++) {
if (per_cpu(vector_irq, cpu)[vector] != irq)

4
arch/x86/kernel/cpu/mcheck/mce.c
Просмотреть файл

@ -1274,7 +1274,7 @@ static void mce_timer_fn(unsigned long data)
*/
iv = __this_cpu_read(mce_next_interval);
if (mce_notify_irq())
iv = max(iv, (unsigned long) HZ/100);
iv = max(iv / 2, (unsigned long) HZ/100);
else
iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
__this_cpu_write(mce_next_interval, iv);
@ -1557,7 +1557,7 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
static void __mcheck_cpu_init_timer(void)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
unsigned long iv = __this_cpu_read(mce_next_interval);
unsigned long iv = check_interval * HZ;
setup_timer(t, mce_timer_fn, smp_processor_id());

11
arch/x86/kernel/cpu/perf_event.c
Просмотреть файл

@ -1496,6 +1496,7 @@ static struct cpu_hw_events *allocate_fake_cpuc(void)
if (!cpuc->shared_regs)
goto error;
}
cpuc->is_fake = 1;
return cpuc;
error:
free_fake_cpuc(cpuc);
@ -1756,6 +1757,12 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
}
static inline int
valid_user_frame(const void __user *fp, unsigned long size)
{
return (__range_not_ok(fp, size, TASK_SIZE) == 0);
}
#ifdef CONFIG_COMPAT
#include <asm/compat.h>
@ -1780,7 +1787,7 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
if (bytes != sizeof(frame))
break;
if (fp < compat_ptr(regs->sp))
if (!valid_user_frame(fp, sizeof(frame)))
break;
perf_callchain_store(entry, frame.return_address);
@ -1826,7 +1833,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
if (bytes != sizeof(frame))
break;
if ((unsigned long)fp < regs->sp)
if (!valid_user_frame(fp, sizeof(frame)))
break;
perf_callchain_store(entry, frame.return_address);

2
arch/x86/kernel/cpu/perf_event.h
Просмотреть файл

@ -117,6 +117,7 @@ struct cpu_hw_events {
struct perf_event *event_list[X86_PMC_IDX_MAX]; /* in enabled order */
unsigned int group_flag;
int is_fake;
/*
* Intel DebugStore bits
@ -364,6 +365,7 @@ struct x86_pmu {
int pebs_record_size;
void (*drain_pebs)(struct pt_regs *regs);
struct event_constraint *pebs_constraints;
void (*pebs_aliases)(struct perf_event *event);
/*
* Intel LBR

145
arch/x86/kernel/cpu/perf_event_intel.c
Просмотреть файл

@ -1119,27 +1119,33 @@ intel_bts_constraints(struct perf_event *event)
return NULL;
}
static bool intel_try_alt_er(struct perf_event *event, int orig_idx)
static int intel_alt_er(int idx)
{
if (!(x86_pmu.er_flags & ERF_HAS_RSP_1))
return false;
return idx;
if (event->hw.extra_reg.idx == EXTRA_REG_RSP_0) {
event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
event->hw.config |= 0x01bb;
event->hw.extra_reg.idx = EXTRA_REG_RSP_1;
event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
} else if (event->hw.extra_reg.idx == EXTRA_REG_RSP_1) {
if (idx == EXTRA_REG_RSP_0)
return EXTRA_REG_RSP_1;
if (idx == EXTRA_REG_RSP_1)
return EXTRA_REG_RSP_0;
return idx;
}
static void intel_fixup_er(struct perf_event *event, int idx)
{
event->hw.extra_reg.idx = idx;
if (idx == EXTRA_REG_RSP_0) {
event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
event->hw.config |= 0x01b7;
event->hw.extra_reg.idx = EXTRA_REG_RSP_0;
event->hw.extra_reg.reg = MSR_OFFCORE_RSP_0;
} else if (idx == EXTRA_REG_RSP_1) {
event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
event->hw.config |= 0x01bb;
event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
}
if (event->hw.extra_reg.idx == orig_idx)
return false;
return true;
}
/*
@ -1157,14 +1163,18 @@ __intel_shared_reg_get_constraints(struct cpu_hw_events *cpuc,
struct event_constraint *c = &emptyconstraint;
struct er_account *era;
unsigned long flags;
int orig_idx = reg->idx;
int idx = reg->idx;
/* already allocated shared msr */
if (reg->alloc)
/*
* reg->alloc can be set due to existing state, so for fake cpuc we
* need to ignore this, otherwise we might fail to allocate proper fake
* state for this extra reg constraint. Also see the comment below.
*/
if (reg->alloc && !cpuc->is_fake)
return NULL; /* call x86_get_event_constraint() */
again:
era = &cpuc->shared_regs->regs[reg->idx];
era = &cpuc->shared_regs->regs[idx];
/*
* we use spin_lock_irqsave() to avoid lockdep issues when
* passing a fake cpuc
@ -1173,6 +1183,29 @@ again:
if (!atomic_read(&era->ref) || era->config == reg->config) {
/*
* If its a fake cpuc -- as per validate_{group,event}() we
* shouldn't touch event state and we can avoid doing so
* since both will only call get_event_constraints() once
* on each event, this avoids the need for reg->alloc.
*
* Not doing the ER fixup will only result in era->reg being
* wrong, but since we won't actually try and program hardware
* this isn't a problem either.
*/
if (!cpuc->is_fake) {
if (idx != reg->idx)
intel_fixup_er(event, idx);
/*
* x86_schedule_events() can call get_event_constraints()
* multiple times on events in the case of incremental
* scheduling(). reg->alloc ensures we only do the ER
* allocation once.
*/
reg->alloc = 1;
}
/* lock in msr value */
era->config = reg->config;
era->reg = reg->reg;
@ -1180,17 +1213,17 @@ again:
/* one more user */
atomic_inc(&era->ref);
/* no need to reallocate during incremental event scheduling */
reg->alloc = 1;
/*
* need to call x86_get_event_constraint()
* to check if associated event has constraints
*/
c = NULL;
} else if (intel_try_alt_er(event, orig_idx)) {
raw_spin_unlock_irqrestore(&era->lock, flags);
goto again;
} else {
idx = intel_alt_er(idx);
if (idx != reg->idx) {
raw_spin_unlock_irqrestore(&era->lock, flags);
goto again;
}
}
raw_spin_unlock_irqrestore(&era->lock, flags);
@ -1204,11 +1237,14 @@ __intel_shared_reg_put_constraints(struct cpu_hw_events *cpuc,
struct er_account *era;
/*
* only put constraint if extra reg was actually
* allocated. Also takes care of event which do
* not use an extra shared reg
* Only put constraint if extra reg was actually allocated. Also takes
* care of event which do not use an extra shared reg.
*
* Also, if this is a fake cpuc we shouldn't touch any event state
* (reg->alloc) and we don't care about leaving inconsistent cpuc state
* either since it'll be thrown out.
*/
if (!reg->alloc)
if (!reg->alloc || cpuc->is_fake)
return;
era = &cpuc->shared_regs->regs[reg->idx];
@ -1300,15 +1336,9 @@ static void intel_put_event_constraints(struct cpu_hw_events *cpuc,
intel_put_shared_regs_event_constraints(cpuc, event);
}
static int intel_pmu_hw_config(struct perf_event *event)
static void intel_pebs_aliases_core2(struct perf_event *event)
{
int ret = x86_pmu_hw_config(event);
if (ret)
return ret;
if (event->attr.precise_ip &&
(event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
/*
* Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
* (0x003c) so that we can use it with PEBS.
@ -1329,10 +1359,48 @@ static int intel_pmu_hw_config(struct perf_event *event)
*/
u64 alt_config = X86_CONFIG(.event=0xc0, .inv=1, .cmask=16);
alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
event->hw.config = alt_config;
}
}
static void intel_pebs_aliases_snb(struct perf_event *event)
{
if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
/*
* Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
* (0x003c) so that we can use it with PEBS.
*
* The regular CPU_CLK_UNHALTED.THREAD_P event (0x003c) isn't
* PEBS capable. However we can use UOPS_RETIRED.ALL
* (0x01c2), which is a PEBS capable event, to get the same
* count.
*
* UOPS_RETIRED.ALL counts the number of cycles that retires
* CNTMASK micro-ops. By setting CNTMASK to a value (16)
* larger than the maximum number of micro-ops that can be
* retired per cycle (4) and then inverting the condition, we
* count all cycles that retire 16 or less micro-ops, which
* is every cycle.
*
* Thereby we gain a PEBS capable cycle counter.
*/
u64 alt_config = X86_CONFIG(.event=0xc2, .umask=0x01, .inv=1, .cmask=16);
alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
event->hw.config = alt_config;
}
}
static int intel_pmu_hw_config(struct perf_event *event)
{
int ret = x86_pmu_hw_config(event);
if (ret)
return ret;
if (event->attr.precise_ip && x86_pmu.pebs_aliases)
x86_pmu.pebs_aliases(event);
if (intel_pmu_needs_lbr_smpl(event)) {
ret = intel_pmu_setup_lbr_filter(event);
@ -1607,6 +1675,7 @@ static __initconst const struct x86_pmu intel_pmu = {
.max_period = (1ULL << 31) - 1,
.get_event_constraints = intel_get_event_constraints,
.put_event_constraints = intel_put_event_constraints,
.pebs_aliases = intel_pebs_aliases_core2,
.format_attrs = intel_arch3_formats_attr,
@ -1840,8 +1909,9 @@ __init int intel_pmu_init(void)
break;
case 42: /* SandyBridge */
x86_add_quirk(intel_sandybridge_quirk);
case 45: /* SandyBridge, "Romely-EP" */
x86_add_quirk(intel_sandybridge_quirk);
case 58: /* IvyBridge */
memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
@ -1849,6 +1919,7 @@ __init int intel_pmu_init(void)
x86_pmu.event_constraints = intel_snb_event_constraints;
x86_pmu.pebs_constraints = intel_snb_pebs_event_constraints;
x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
x86_pmu.extra_regs = intel_snb_extra_regs;
/* all extra regs are per-cpu when HT is on */
x86_pmu.er_flags |= ERF_HAS_RSP_1;

9
arch/x86/kernel/cpu/perf_event_intel_ds.c
Просмотреть файл

@ -400,14 +400,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
INTEL_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.* */
INTEL_UEVENT_CONSTRAINT(0x11d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_LOADS */
INTEL_UEVENT_CONSTRAINT(0x12d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_STORES */
INTEL_UEVENT_CONSTRAINT(0x21d0, 0xf), /* MEM_UOP_RETIRED.LOCK_LOADS */
INTEL_UEVENT_CONSTRAINT(0x22d0, 0xf), /* MEM_UOP_RETIRED.LOCK_STORES */
INTEL_UEVENT_CONSTRAINT(0x41d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_LOADS */
INTEL_UEVENT_CONSTRAINT(0x42d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_STORES */
INTEL_UEVENT_CONSTRAINT(0x81d0, 0xf), /* MEM_UOP_RETIRED.ANY_LOADS */
INTEL_UEVENT_CONSTRAINT(0x82d0, 0xf), /* MEM_UOP_RETIRED.ANY_STORES */
INTEL_EVENT_CONSTRAINT(0xd0, 0xf), /* MEM_UOP_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
INTEL_UEVENT_CONSTRAINT(0x02d4, 0xf), /* MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS */

4
arch/x86/kernel/nmi_selftest.c
Просмотреть файл

@ -42,7 +42,7 @@ static int __init nmi_unk_cb(unsigned int val, struct pt_regs *regs)
static void __init init_nmi_testsuite(void)
{
/* trap all the unknown NMIs we may generate */
register_nmi_handler(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
register_nmi_handler_initonly(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
}
static void __init cleanup_nmi_testsuite(void)
@ -64,7 +64,7 @@ static void __init test_nmi_ipi(struct cpumask *mask)
{
unsigned long timeout;
if (register_nmi_handler(NMI_LOCAL, test_nmi_ipi_callback,
if (register_nmi_handler_initonly(NMI_LOCAL, test_nmi_ipi_callback,
NMI_FLAG_FIRST, "nmi_selftest")) {
nmi_fail = FAILURE;
return;

6
arch/x86/kernel/reboot.c
Просмотреть файл

@ -639,9 +639,11 @@ void native_machine_shutdown(void)
set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
/*
* O.K Now that I'm on the appropriate processor,
* stop all of the others.
* O.K Now that I'm on the appropriate processor, stop all of the
* others. Also disable the local irq to not receive the per-cpu
* timer interrupt which may trigger scheduler's load balance.
*/
local_irq_disable();
stop_other_cpus();
#endif

19
arch/x86/kernel/smpboot.c
Просмотреть файл

@ -382,6 +382,15 @@ void __cpuinit set_cpu_sibling_map(int cpu)
if ((i == cpu) || (has_mc && match_llc(c, o)))
link_mask(llc_shared, cpu, i);
}
/*
* This needs a separate iteration over the cpus because we rely on all
* cpu_sibling_mask links to be set-up.
*/
for_each_cpu(i, cpu_sibling_setup_mask) {
o = &cpu_data(i);
if ((i == cpu) || (has_mc && match_mc(c, o))) {
link_mask(core, cpu, i);
@ -410,15 +419,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
/* maps the cpu to the sched domain representing multi-core */
const struct cpumask *cpu_coregroup_mask(int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
/*
* For perf, we return last level cache shared map.
* And for power savings, we return cpu_core_map
*/
if (!(cpu_has(c, X86_FEATURE_AMD_DCM)))
return cpu_core_mask(cpu);
else
return cpu_llc_shared_mask(cpu);
return cpu_llc_shared_mask(cpu);
}
static void impress_friends(void)

4
arch/x86/lib/usercopy.c
Просмотреть файл

@ -8,6 +8,7 @@
#include <linux/module.h>
#include <asm/word-at-a-time.h>
#include <linux/sched.h>
/*
* best effort, GUP based copy_from_user() that is NMI-safe
@ -21,6 +22,9 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
void *map;
int ret;
if (__range_not_ok(from, n, TASK_SIZE) == 0)
return len;
do {
ret = __get_user_pages_fast(addr, 1, 0, &page);
if (!ret)

8
arch/x86/lib/x86-opcode-map.txt
Просмотреть файл

@ -28,7 +28,7 @@
# - (66): the last prefix is 0x66
# - (F3): the last prefix is 0xF3
# - (F2): the last prefix is 0xF2
#
# - (!F3) : the last prefix is not 0xF3 (including non-last prefix case)
Table: one byte opcode
Referrer:
@ -515,12 +515,12 @@ b4: LFS Gv,Mp
b5: LGS Gv,Mp
b6: MOVZX Gv,Eb
b7: MOVZX Gv,Ew
b8: JMPE | POPCNT Gv,Ev (F3)
b8: JMPE (!F3) | POPCNT Gv,Ev (F3)
b9: Grp10 (1A)
ba: Grp8 Ev,Ib (1A)
bb: BTC Ev,Gv
bc: BSF Gv,Ev | TZCNT Gv,Ev (F3)
bd: BSR Gv,Ev | LZCNT Gv,Ev (F3)
bc: BSF Gv,Ev (!F3) | TZCNT Gv,Ev (F3)
bd: BSR Gv,Ev (!F3) | LZCNT Gv,Ev (F3)
be: MOVSX Gv,Eb
bf: MOVSX Gv,Ew
# 0x0f 0xc0-0xcf

3
arch/x86/mm/init.c
Просмотреть файл

@ -62,7 +62,8 @@ static void __init find_early_table_space(struct map_range *mr, unsigned long en
extra += PMD_SIZE;
#endif
/* The first 2/4M doesn't use large pages. */
extra += mr->end - mr->start;
if (mr->start < PMD_SIZE)
extra += mr->end - mr->start;
ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
} else

2
arch/x86/mm/srat.c
Просмотреть файл

@ -176,6 +176,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
return;
}
node_set(node, numa_nodes_parsed);
printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1);

2
arch/x86/platform/mrst/mrst.c
Просмотреть файл

@ -782,7 +782,7 @@ BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
EXPORT_SYMBOL_GPL(intel_scu_notifier);
/* Called by IPC driver */
void intel_scu_devices_create(void)
void __devinit intel_scu_devices_create(void)
{
int i;

1
arch/x86/platform/uv/tlb_uv.c
Просмотреть файл

@ -1295,7 +1295,6 @@ static void __init enable_timeouts(void)
*/
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
mmr_image &= ~(1L << UV2_LEG_SHFT);
mmr_image |= (1L << UV2_EXT_SHFT);
}
write_mmr_misc_control(pnode, mmr_image);

14
arch/x86/tools/gen-insn-attr-x86.awk
Просмотреть файл

@ -66,9 +66,10 @@ BEGIN {
rex_expr = "^REX(\\.[XRWB]+)*"
fpu_expr = "^ESC" # TODO
lprefix1_expr = "\\(66\\)"
lprefix1_expr = "\\((66|!F3)\\)"
lprefix2_expr = "\\(F3\\)"
lprefix3_expr = "\\(F2\\)"
lprefix3_expr = "\\((F2|!F3)\\)"
lprefix_expr = "\\((66|F2|F3)\\)"
max_lprefix = 4
# All opcodes starting with lower-case 'v' or with (v1) superscript
@ -333,13 +334,16 @@ function convert_operands(count,opnd, i,j,imm,mod)
if (match(ext, lprefix1_expr)) {
lptable1[idx] = add_flags(lptable1[idx],flags)
variant = "INAT_VARIANT"
} else if (match(ext, lprefix2_expr)) {
}
if (match(ext, lprefix2_expr)) {
lptable2[idx] = add_flags(lptable2[idx],flags)
variant = "INAT_VARIANT"
} else if (match(ext, lprefix3_expr)) {
}
if (match(ext, lprefix3_expr)) {
lptable3[idx] = add_flags(lptable3[idx],flags)
variant = "INAT_VARIANT"
} else {
}
if (!match(ext, lprefix_expr)){
table[idx] = add_flags(table[idx],flags)
}
}

4
arch/xtensa/include/asm/syscall.h
Просмотреть файл

@ -31,5 +31,5 @@ asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
struct timespec __user *tsp, const sigset_t __user *sigmask,
size_t sigsetsize);
asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
size_t sigsetsize);

2
arch/xtensa/kernel/signal.c
Просмотреть файл

@ -493,7 +493,7 @@ static void do_signal(struct pt_regs *regs)
if (ret)
return;
signal_delivered(signr, info, ka, regs, 0);
signal_delivered(signr, &info, &ka, regs, 0);
if (current->ptrace & PT_SINGLESTEP)
task_pt_regs(current)->icountlevel = 1;

2
drivers/acpi/Kconfig
Просмотреть файл

@ -208,7 +208,7 @@ config ACPI_IPMI
config ACPI_HOTPLUG_CPU
bool
depends on ACPI_PROCESSOR && HOTPLUG_CPU
depends on EXPERIMENTAL && ACPI_PROCESSOR && HOTPLUG_CPU
select ACPI_CONTAINER
default y

10
drivers/acpi/battery.c
Просмотреть файл

@ -643,11 +643,19 @@ static int acpi_battery_update(struct acpi_battery *battery)
static void acpi_battery_refresh(struct acpi_battery *battery)
{
int power_unit;
if (!battery->bat.dev)
return;
power_unit = battery->power_unit;
acpi_battery_get_info(battery);
/* The battery may have changed its reporting units. */
if (power_unit == battery->power_unit)
return;
/* The battery has changed its reporting units. */
sysfs_remove_battery(battery);
sysfs_add_battery(battery);
}

88
drivers/acpi/bus.c
Просмотреть файл

@ -182,41 +182,66 @@ EXPORT_SYMBOL(acpi_bus_get_private_data);
Power Management
-------------------------------------------------------------------------- */
static const char *state_string(int state)
{
switch (state) {
case ACPI_STATE_D0:
return "D0";
case ACPI_STATE_D1:
return "D1";
case ACPI_STATE_D2:
return "D2";
case ACPI_STATE_D3_HOT:
return "D3hot";
case ACPI_STATE_D3_COLD:
return "D3";
default:
return "(unknown)";
}
}
static int __acpi_bus_get_power(struct acpi_device *device, int *state)
{
int result = 0;
acpi_status status = 0;
unsigned long long psc = 0;
int result = ACPI_STATE_UNKNOWN;
if (!device || !state)
return -EINVAL;
*state = ACPI_STATE_UNKNOWN;
if (device->flags.power_manageable) {
/*
* Get the device's power state either directly (via _PSC) or
* indirectly (via power resources).
*/
if (device->power.flags.power_resources) {
result = acpi_power_get_inferred_state(device, state);
if (result)
return result;
} else if (device->power.flags.explicit_get) {
status = acpi_evaluate_integer(device->handle, "_PSC",
NULL, &psc);
if (ACPI_FAILURE(status))
return -ENODEV;
*state = (int)psc;
}
} else {
if (!device->flags.power_manageable) {
/* TBD: Non-recursive algorithm for walking up hierarchy. */
*state = device->parent ?
device->parent->power.state : ACPI_STATE_D0;
goto out;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is D%d\n",
device->pnp.bus_id, *state));
/*
* Get the device's power state either directly (via _PSC) or
* indirectly (via power resources).
*/
if (device->power.flags.explicit_get) {
unsigned long long psc;
acpi_status status = acpi_evaluate_integer(device->handle,
"_PSC", NULL, &psc);
if (ACPI_FAILURE(status))
return -ENODEV;
result = psc;
}
/* The test below covers ACPI_STATE_UNKNOWN too. */
if (result <= ACPI_STATE_D2) {
; /* Do nothing. */
} else if (device->power.flags.power_resources) {
int error = acpi_power_get_inferred_state(device, &result);
if (error)
return error;
} else if (result == ACPI_STATE_D3_HOT) {
result = ACPI_STATE_D3;
}
*state = result;
out:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is %s\n",
device->pnp.bus_id, state_string(*state)));
return 0;
}
@ -234,13 +259,14 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
/* Make sure this is a valid target state */
if (state == device->power.state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at %s\n",
state_string(state)));
return 0;
}
if (!device->power.states[state].flags.valid) {
printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
printk(KERN_WARNING PREFIX "Device does not support %s\n",
state_string(state));
return -ENODEV;
}
if (device->parent && (state < device->parent->power.state)) {
@ -294,13 +320,13 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
end:
if (result)
printk(KERN_WARNING PREFIX
"Device [%s] failed to transition to D%d\n",
device->pnp.bus_id, state);
"Device [%s] failed to transition to %s\n",
device->pnp.bus_id, state_string(state));
else {
device->power.state = state;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device [%s] transitioned to D%d\n",
device->pnp.bus_id, state));
"Device [%s] transitioned to %s\n",
device->pnp.bus_id, state_string(state)));
}
return result;

2
drivers/acpi/power.c
Просмотреть файл

@ -631,7 +631,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
* We know a device's inferred power state when all the resources
* required for a given D-state are 'on'.
*/
for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
list = &device->power.states[i].resources;
if (list->count < 1)
continue;

30
drivers/acpi/processor_perflib.c
Просмотреть файл

@ -333,6 +333,7 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
struct acpi_buffer state = { 0, NULL };
union acpi_object *pss = NULL;
int i;
int last_invalid = -1;
status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
@ -394,14 +395,33 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
((u32)(px->core_frequency * 1000) !=
(px->core_frequency * 1000))) {
printk(KERN_ERR FW_BUG PREFIX
"Invalid BIOS _PSS frequency: 0x%llx MHz\n",
px->core_frequency);
result = -EFAULT;
kfree(pr->performance->states);
goto end;
"Invalid BIOS _PSS frequency found for processor %d: 0x%llx MHz\n",
pr->id, px->core_frequency);
if (last_invalid == -1)
last_invalid = i;
} else {
if (last_invalid != -1) {
/*
* Copy this valid entry over last_invalid entry
*/
memcpy(&(pr->performance->states[last_invalid]),
px, sizeof(struct acpi_processor_px));
++last_invalid;
}
}
}
if (last_invalid == 0) {
printk(KERN_ERR FW_BUG PREFIX
"No valid BIOS _PSS frequency found for processor %d\n", pr->id);
result = -EFAULT;
kfree(pr->performance->states);
pr->performance->states = NULL;
}
if (last_invalid > 0)
pr->performance->state_count = last_invalid;
end:
kfree(buffer.pointer);

1
drivers/acpi/scan.c
Просмотреть файл

@ -1567,6 +1567,7 @@ static int acpi_bus_scan_fixed(void)
ACPI_BUS_TYPE_POWER_BUTTON,
ACPI_STA_DEFAULT,
&ops);
device_init_wakeup(&device->dev, true);
}
if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {

49
drivers/acpi/sleep.c
Просмотреть файл

@ -57,6 +57,7 @@ MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
static u8 sleep_states[ACPI_S_STATE_COUNT];
static bool pwr_btn_event_pending;
static void acpi_sleep_tts_switch(u32 acpi_state)
{
@ -184,6 +185,14 @@ static int acpi_pm_prepare(void)
return error;
}
static int find_powerf_dev(struct device *dev, void *data)
{
struct acpi_device *device = to_acpi_device(dev);
const char *hid = acpi_device_hid(device);
return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
}
/**
* acpi_pm_finish - Instruct the platform to leave a sleep state.
*
@ -192,6 +201,7 @@ static int acpi_pm_prepare(void)
*/
static void acpi_pm_finish(void)
{
struct device *pwr_btn_dev;
u32 acpi_state = acpi_target_sleep_state;
acpi_ec_unblock_transactions();
@ -209,6 +219,23 @@ static void acpi_pm_finish(void)
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
/* If we were woken with the fixed power button, provide a small
* hint to userspace in the form of a wakeup event on the fixed power
* button device (if it can be found).
*
* We delay the event generation til now, as the PM layer requires
* timekeeping to be running before we generate events. */
if (!pwr_btn_event_pending)
return;
pwr_btn_event_pending = false;
pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
find_powerf_dev);
if (pwr_btn_dev) {
pm_wakeup_event(pwr_btn_dev, 0);
put_device(pwr_btn_dev);
}
}
/**
@ -298,9 +325,23 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
/* ACPI 3.0 specs (P62) says that it's the responsibility
* of the OSPM to clear the status bit [ implying that the
* POWER_BUTTON event should not reach userspace ]
*
* However, we do generate a small hint for userspace in the form of
* a wakeup event. We flag this condition for now and generate the
* event later, as we're currently too early in resume to be able to
* generate wakeup events.
*/
if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
acpi_event_status pwr_btn_status;
acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
/* Flag for later */
pwr_btn_event_pending = true;
}
}
/*
* Disable and clear GPE status before interrupt is enabled. Some GPEs
@ -730,8 +771,8 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
(device_may_wakeup(dev) &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
(device_may_wakeup(dev) && adev->wakeup.flags.valid &&
adev->wakeup.sleep_state >= acpi_target_sleep_state)) {
acpi_status status;
acpi_method[3] = 'W';

33
drivers/acpi/video.c
Просмотреть файл

@ -1687,10 +1687,6 @@ static int acpi_video_bus_add(struct acpi_device *device)
set_bit(KEY_BRIGHTNESS_ZERO, input->keybit);
set_bit(KEY_DISPLAY_OFF, input->keybit);
error = input_register_device(input);
if (error)
goto err_stop_video;
printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n",
ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
video->flags.multihead ? "yes" : "no",
@ -1701,12 +1697,16 @@ static int acpi_video_bus_add(struct acpi_device *device)
video->pm_nb.priority = 0;
error = register_pm_notifier(&video->pm_nb);
if (error)
goto err_unregister_input_dev;
goto err_stop_video;
error = input_register_device(input);
if (error)
goto err_unregister_pm_notifier;
return 0;
err_unregister_input_dev:
input_unregister_device(input);
err_unregister_pm_notifier:
unregister_pm_notifier(&video->pm_nb);
err_stop_video:
acpi_video_bus_stop_devices(video);
err_free_input_dev:
@ -1743,9 +1743,18 @@ static int acpi_video_bus_remove(struct acpi_device *device, int type)
return 0;
}
static int __init is_i740(struct pci_dev *dev)
{
if (dev->device == 0x00D1)
return 1;
if (dev->device == 0x7000)
return 1;
return 0;
}
static int __init intel_opregion_present(void)
{
#if defined(CONFIG_DRM_I915) || defined(CONFIG_DRM_I915_MODULE)
int opregion = 0;
struct pci_dev *dev = NULL;
u32 address;
@ -1754,13 +1763,15 @@ static int __init intel_opregion_present(void)
continue;
if (dev->vendor != PCI_VENDOR_ID_INTEL)
continue;
/* We don't want to poke around undefined i740 registers */
if (is_i740(dev))
continue;
pci_read_config_dword(dev, 0xfc, &address);
if (!address)
continue;
return 1;
opregion = 1;
}
#endif
return 0;
return opregion;
}
int acpi_video_register(void)

1
drivers/char/agp/intel-agp.c
Просмотреть файл

@ -898,6 +898,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
ID(PCI_DEVICE_ID_INTEL_B43_HB),
ID(PCI_DEVICE_ID_INTEL_B43_1_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB),

1
drivers/char/agp/intel-agp.h
Просмотреть файл

@ -212,6 +212,7 @@
#define PCI_DEVICE_ID_INTEL_G41_HB 0x2E30
#define PCI_DEVICE_ID_INTEL_G41_IG 0x2E32
#define PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB 0x0040
#define PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB 0x0069
#define PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG 0x0042
#define PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB 0x0044
#define PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB 0x0062

1
drivers/clocksource/Makefile
Просмотреть файл

@ -6,6 +6,7 @@ obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o

406
drivers/clocksource/em_sti.c Normal file
Просмотреть файл

@ -0,0 +1,406 @@
/*
* Emma Mobile Timer Support - STI
*
* Copyright (C) 2012 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/slab.h>
#include <linux/module.h>
enum { USER_CLOCKSOURCE, USER_CLOCKEVENT, USER_NR };
struct em_sti_priv {
void __iomem *base;
struct clk *clk;
struct platform_device *pdev;
unsigned int active[USER_NR];
unsigned long rate;
raw_spinlock_t lock;
struct clock_event_device ced;
struct clocksource cs;
};
#define STI_CONTROL 0x00
#define STI_COMPA_H 0x10
#define STI_COMPA_L 0x14
#define STI_COMPB_H 0x18
#define STI_COMPB_L 0x1c
#define STI_COUNT_H 0x20
#define STI_COUNT_L 0x24
#define STI_COUNT_RAW_H 0x28
#define STI_COUNT_RAW_L 0x2c
#define STI_SET_H 0x30
#define STI_SET_L 0x34
#define STI_INTSTATUS 0x40
#define STI_INTRAWSTATUS 0x44
#define STI_INTENSET 0x48
#define STI_INTENCLR 0x4c
#define STI_INTFFCLR 0x50
static inline unsigned long em_sti_read(struct em_sti_priv *p, int offs)
{
return ioread32(p->base + offs);
}
static inline void em_sti_write(struct em_sti_priv *p, int offs,
unsigned long value)
{
iowrite32(value, p->base + offs);
}
static int em_sti_enable(struct em_sti_priv *p)
{
int ret;
/* enable clock */
ret = clk_enable(p->clk);
if (ret) {
dev_err(&p->pdev->dev, "cannot enable clock\n");
return ret;
}
/* configure channel, periodic mode and maximum timeout */
p->rate = clk_get_rate(p->clk);
/* reset the counter */
em_sti_write(p, STI_SET_H, 0x40000000);
em_sti_write(p, STI_SET_L, 0x00000000);
/* mask and clear pending interrupts */
em_sti_write(p, STI_INTENCLR, 3);
em_sti_write(p, STI_INTFFCLR, 3);
/* enable updates of counter registers */
em_sti_write(p, STI_CONTROL, 1);
return 0;
}
static void em_sti_disable(struct em_sti_priv *p)
{
/* mask interrupts */
em_sti_write(p, STI_INTENCLR, 3);
/* stop clock */
clk_disable(p->clk);
}
static cycle_t em_sti_count(struct em_sti_priv *p)
{
cycle_t ticks;
unsigned long flags;
/* the STI hardware buffers the 48-bit count, but to
* break it out into two 32-bit access the registers
* must be accessed in a certain order.
* Always read STI_COUNT_H before STI_COUNT_L.
*/
raw_spin_lock_irqsave(&p->lock, flags);
ticks = (cycle_t)(em_sti_read(p, STI_COUNT_H) & 0xffff) << 32;
ticks |= em_sti_read(p, STI_COUNT_L);
raw_spin_unlock_irqrestore(&p->lock, flags);
return ticks;
}
static cycle_t em_sti_set_next(struct em_sti_priv *p, cycle_t next)
{
unsigned long flags;
raw_spin_lock_irqsave(&p->lock, flags);
/* mask compare A interrupt */
em_sti_write(p, STI_INTENCLR, 1);
/* update compare A value */
em_sti_write(p, STI_COMPA_H, next >> 32);
em_sti_write(p, STI_COMPA_L, next & 0xffffffff);
/* clear compare A interrupt source */
em_sti_write(p, STI_INTFFCLR, 1);
/* unmask compare A interrupt */
em_sti_write(p, STI_INTENSET, 1);
raw_spin_unlock_irqrestore(&p->lock, flags);
return next;
}
static irqreturn_t em_sti_interrupt(int irq, void *dev_id)
{
struct em_sti_priv *p = dev_id;
p->ced.event_handler(&p->ced);
return IRQ_HANDLED;
}
static int em_sti_start(struct em_sti_priv *p, unsigned int user)
{
unsigned long flags;
int used_before;
int ret = 0;
raw_spin_lock_irqsave(&p->lock, flags);
used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
if (!used_before)
ret = em_sti_enable(p);
if (!ret)
p->active[user] = 1;
raw_spin_unlock_irqrestore(&p->lock, flags);
return ret;
}
static void em_sti_stop(struct em_sti_priv *p, unsigned int user)
{
unsigned long flags;
int used_before, used_after;
raw_spin_lock_irqsave(&p->lock, flags);
used_before = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
p->active[user] = 0;
used_after = p->active[USER_CLOCKSOURCE] | p->active[USER_CLOCKEVENT];
if (used_before && !used_after)
em_sti_disable(p);
raw_spin_unlock_irqrestore(&p->lock, flags);
}
static struct em_sti_priv *cs_to_em_sti(struct clocksource *cs)
{
return container_of(cs, struct em_sti_priv, cs);
}
static cycle_t em_sti_clocksource_read(struct clocksource *cs)
{
return em_sti_count(cs_to_em_sti(cs));
}
static int em_sti_clocksource_enable(struct clocksource *cs)
{
int ret;
struct em_sti_priv *p = cs_to_em_sti(cs);
ret = em_sti_start(p, USER_CLOCKSOURCE);
if (!ret)
__clocksource_updatefreq_hz(cs, p->rate);
return ret;
}
static void em_sti_clocksource_disable(struct clocksource *cs)
{
em_sti_stop(cs_to_em_sti(cs), USER_CLOCKSOURCE);
}
static void em_sti_clocksource_resume(struct clocksource *cs)
{
em_sti_clocksource_enable(cs);
}
static int em_sti_register_clocksource(struct em_sti_priv *p)
{
struct clocksource *cs = &p->cs;
memset(cs, 0, sizeof(*cs));
cs->name = dev_name(&p->pdev->dev);
cs->rating = 200;
cs->read = em_sti_clocksource_read;
cs->enable = em_sti_clocksource_enable;
cs->disable = em_sti_clocksource_disable;
cs->suspend = em_sti_clocksource_disable;
cs->resume = em_sti_clocksource_resume;
cs->mask = CLOCKSOURCE_MASK(48);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
dev_info(&p->pdev->dev, "used as clock source\n");
/* Register with dummy 1 Hz value, gets updated in ->enable() */
clocksource_register_hz(cs, 1);
return 0;
}
static struct em_sti_priv *ced_to_em_sti(struct clock_event_device *ced)
{
return container_of(ced, struct em_sti_priv, ced);
}
static void em_sti_clock_event_mode(enum clock_event_mode mode,
struct clock_event_device *ced)
{
struct em_sti_priv *p = ced_to_em_sti(ced);
/* deal with old setting first */
switch (ced->mode) {
case CLOCK_EVT_MODE_ONESHOT:
em_sti_stop(p, USER_CLOCKEVENT);
break;
default:
break;
}
switch (mode) {
case CLOCK_EVT_MODE_ONESHOT:
dev_info(&p->pdev->dev, "used for oneshot clock events\n");
em_sti_start(p, USER_CLOCKEVENT);
clockevents_config(&p->ced, p->rate);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
em_sti_stop(p, USER_CLOCKEVENT);
break;
default:
break;
}
}
static int em_sti_clock_event_next(unsigned long delta,
struct clock_event_device *ced)
{
struct em_sti_priv *p = ced_to_em_sti(ced);
cycle_t next;
int safe;
next = em_sti_set_next(p, em_sti_count(p) + delta);
safe = em_sti_count(p) < (next - 1);
return !safe;
}
static void em_sti_register_clockevent(struct em_sti_priv *p)
{
struct clock_event_device *ced = &p->ced;
memset(ced, 0, sizeof(*ced));
ced->name = dev_name(&p->pdev->dev);
ced->features = CLOCK_EVT_FEAT_ONESHOT;
ced->rating = 200;
ced->cpumask = cpumask_of(0);
ced->set_next_event = em_sti_clock_event_next;
ced->set_mode = em_sti_clock_event_mode;
dev_info(&p->pdev->dev, "used for clock events\n");
/* Register with dummy 1 Hz value, gets updated in ->set_mode() */
clockevents_config_and_register(ced, 1, 2, 0xffffffff);
}
static int __devinit em_sti_probe(struct platform_device *pdev)
{
struct em_sti_priv *p;
struct resource *res;
int irq, ret;
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
ret = -ENOMEM;
goto err0;
}
p->pdev = pdev;
platform_set_drvdata(pdev, p);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
ret = -EINVAL;
goto err0;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get irq\n");
ret = -EINVAL;
goto err0;
}
/* map memory, let base point to the STI instance */
p->base = ioremap_nocache(res->start, resource_size(res));
if (p->base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
ret = -ENXIO;
goto err0;
}
/* get hold of clock */
p->clk = clk_get(&pdev->dev, "sclk");
if (IS_ERR(p->clk)) {
dev_err(&pdev->dev, "cannot get clock\n");
ret = PTR_ERR(p->clk);
goto err1;
}
if (request_irq(irq, em_sti_interrupt,
IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
dev_name(&pdev->dev), p)) {
dev_err(&pdev->dev, "failed to request low IRQ\n");
ret = -ENOENT;
goto err2;
}
raw_spin_lock_init(&p->lock);
em_sti_register_clockevent(p);
em_sti_register_clocksource(p);
return 0;
err2:
clk_put(p->clk);
err1:
iounmap(p->base);
err0:
kfree(p);
return ret;
}
static int __devexit em_sti_remove(struct platform_device *pdev)
{
return -EBUSY; /* cannot unregister clockevent and clocksource */
}
static const struct of_device_id em_sti_dt_ids[] __devinitconst = {
{ .compatible = "renesas,em-sti", },
{},
};
MODULE_DEVICE_TABLE(of, em_sti_dt_ids);
static struct platform_driver em_sti_device_driver = {
.probe = em_sti_probe,
.remove = __devexit_p(em_sti_remove),
.driver = {
.name = "em_sti",
.of_match_table = em_sti_dt_ids,
}
};
module_platform_driver(em_sti_device_driver);
MODULE_AUTHOR("Magnus Damm");
MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver");
MODULE_LICENSE("GPL v2");

2
drivers/gpio/gpio-samsung.c
Просмотреть файл

@ -2833,7 +2833,7 @@ static __init void exynos5_gpiolib_init(void)
}
/* need to set base address for gpc4 */
exonys5_gpios_1[11].base = gpio_base1 + 0x2E0;
exynos5_gpios_1[11].base = gpio_base1 + 0x2E0;
/* need to set base address for gpx */
chip = &exynos5_gpios_1[21];

4
drivers/gpu/drm/exynos/exynos_drm_drv.c
Просмотреть файл

@ -244,8 +244,8 @@ static const struct file_operations exynos_drm_driver_fops = {
};
static struct drm_driver exynos_drm_driver = {
.driver_features = DRIVER_HAVE_IRQ | DRIVER_BUS_PLATFORM |
DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME,
.driver_features = DRIVER_HAVE_IRQ | DRIVER_MODESET |
DRIVER_GEM | DRIVER_PRIME,
.load = exynos_drm_load,
.unload = exynos_drm_unload,
.open = exynos_drm_open,

7
drivers/gpu/drm/exynos/exynos_drm_encoder.c
Просмотреть файл

@ -172,19 +172,12 @@ static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
manager_ops->commit(manager->dev);
}
static struct drm_crtc *
exynos_drm_encoder_get_crtc(struct drm_encoder *encoder)
{
return encoder->crtc;
}
static struct drm_encoder_helper_funcs exynos_encoder_helper_funcs = {
.dpms = exynos_drm_encoder_dpms,
.mode_fixup = exynos_drm_encoder_mode_fixup,
.mode_set = exynos_drm_encoder_mode_set,
.prepare = exynos_drm_encoder_prepare,
.commit = exynos_drm_encoder_commit,
.get_crtc = exynos_drm_encoder_get_crtc,
};
static void exynos_drm_encoder_destroy(struct drm_encoder *encoder)

19
drivers/gpu/drm/exynos/exynos_drm_fb.c
Просмотреть файл

@ -51,11 +51,22 @@ struct exynos_drm_fb {
static void exynos_drm_fb_destroy(struct drm_framebuffer *fb)
{
struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb);
unsigned int i;
DRM_DEBUG_KMS("%s\n", __FILE__);
drm_framebuffer_cleanup(fb);
for (i = 0; i < ARRAY_SIZE(exynos_fb->exynos_gem_obj); i++) {
struct drm_gem_object *obj;
if (exynos_fb->exynos_gem_obj[i] == NULL)
continue;
obj = &exynos_fb->exynos_gem_obj[i]->base;
drm_gem_object_unreference_unlocked(obj);
}
kfree(exynos_fb);
exynos_fb = NULL;
}
@ -134,11 +145,11 @@ exynos_user_fb_create(struct drm_device *dev, struct drm_file *file_priv,
return ERR_PTR(-ENOENT);
}
drm_gem_object_unreference_unlocked(obj);
fb = exynos_drm_framebuffer_init(dev, mode_cmd, obj);
if (IS_ERR(fb))
if (IS_ERR(fb)) {
drm_gem_object_unreference_unlocked(obj);
return fb;
}
exynos_fb = to_exynos_fb(fb);
nr = exynos_drm_format_num_buffers(fb->pixel_format);
@ -152,8 +163,6 @@ exynos_user_fb_create(struct drm_device *dev, struct drm_file *file_priv,
return ERR_PTR(-ENOENT);
}
drm_gem_object_unreference_unlocked(obj);
exynos_fb->exynos_gem_obj[i] = to_exynos_gem_obj(obj);
}

4
drivers/gpu/drm/exynos/exynos_drm_fb.h
Просмотреть файл

@ -31,10 +31,10 @@
static inline int exynos_drm_format_num_buffers(uint32_t format)
{
switch (format) {
case DRM_FORMAT_NV12M:
case DRM_FORMAT_NV12:
case DRM_FORMAT_NV12MT:
return 2;
case DRM_FORMAT_YUV420M:
case DRM_FORMAT_YUV420:
return 3;
default:
return 1;

9
drivers/gpu/drm/exynos/exynos_drm_gem.c
Просмотреть файл

@ -689,7 +689,6 @@ int exynos_drm_gem_dumb_map_offset(struct drm_file *file_priv,
struct drm_device *dev, uint32_t handle,
uint64_t *offset)
{
struct exynos_drm_gem_obj *exynos_gem_obj;
struct drm_gem_object *obj;
int ret = 0;
@ -710,15 +709,13 @@ int exynos_drm_gem_dumb_map_offset(struct drm_file *file_priv,
goto unlock;
}
exynos_gem_obj = to_exynos_gem_obj(obj);
if (!exynos_gem_obj->base.map_list.map) {
ret = drm_gem_create_mmap_offset(&exynos_gem_obj->base);
if (!obj->map_list.map) {
ret = drm_gem_create_mmap_offset(obj);
if (ret)
goto out;
}
*offset = (u64)exynos_gem_obj->base.map_list.hash.key << PAGE_SHIFT;
*offset = (u64)obj->map_list.hash.key << PAGE_SHIFT;
DRM_DEBUG_KMS("offset = 0x%lx\n", (unsigned long)*offset);
out:

12
drivers/gpu/drm/exynos/exynos_mixer.c
Просмотреть файл

@ -365,7 +365,7 @@ static void vp_video_buffer(struct mixer_context *ctx, int win)
switch (win_data->pixel_format) {
case DRM_FORMAT_NV12MT:
tiled_mode = true;
case DRM_FORMAT_NV12M:
case DRM_FORMAT_NV12:
crcb_mode = false;
buf_num = 2;
break;
@ -601,18 +601,20 @@ static void mixer_win_reset(struct mixer_context *ctx)
mixer_reg_write(res, MXR_BG_COLOR2, 0x008080);
/* setting graphical layers */
val = MXR_GRP_CFG_COLOR_KEY_DISABLE; /* no blank key */
val |= MXR_GRP_CFG_WIN_BLEND_EN;
val |= MXR_GRP_CFG_BLEND_PRE_MUL;
val |= MXR_GRP_CFG_PIXEL_BLEND_EN;
val |= MXR_GRP_CFG_ALPHA_VAL(0xff); /* non-transparent alpha */
/* the same configuration for both layers */
mixer_reg_write(res, MXR_GRAPHIC_CFG(0), val);
val |= MXR_GRP_CFG_BLEND_PRE_MUL;
val |= MXR_GRP_CFG_PIXEL_BLEND_EN;
mixer_reg_write(res, MXR_GRAPHIC_CFG(1), val);
/* setting video layers */
val = MXR_GRP_CFG_ALPHA_VAL(0);
mixer_reg_write(res, MXR_VIDEO_CFG, val);
/* configuration of Video Processor Registers */
vp_win_reset(ctx);
vp_default_filter(res);

13
drivers/gpu/drm/i915/i915_drv.c
Просмотреть файл

@ -233,6 +233,7 @@ static const struct intel_device_info intel_sandybridge_d_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
@ -243,6 +244,7 @@ static const struct intel_device_info intel_sandybridge_m_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_ivybridge_d_info = {
@ -252,6 +254,7 @@ static const struct intel_device_info intel_ivybridge_d_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_ivybridge_m_info = {
@ -262,6 +265,7 @@ static const struct intel_device_info intel_ivybridge_m_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_valleyview_m_info = {
@ -289,6 +293,7 @@ static const struct intel_device_info intel_haswell_d_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_haswell_m_info = {
@ -298,6 +303,7 @@ static const struct intel_device_info intel_haswell_m_info = {
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
.has_force_wake = 1,
};
static const struct pci_device_id pciidlist[] = { /* aka */
@ -1139,10 +1145,9 @@ MODULE_LICENSE("GPL and additional rights");
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
(((dev_priv)->info->gen >= 6) && \
((reg) < 0x40000) && \
((reg) != FORCEWAKE)) && \
(!IS_VALLEYVIEW((dev_priv)->dev))
((HAS_FORCE_WAKE((dev_priv)->dev)) && \
((reg) < 0x40000) && \
((reg) != FORCEWAKE))
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \

3
drivers/gpu/drm/i915/i915_drv.h
Просмотреть файл

@ -285,6 +285,7 @@ struct intel_device_info {
u8 is_ivybridge:1;
u8 is_valleyview:1;
u8 has_pch_split:1;
u8 has_force_wake:1;
u8 is_haswell:1;
u8 has_fbc:1;
u8 has_pipe_cxsr:1;
@ -1101,6 +1102,8 @@ struct drm_i915_file_private {
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
#define HAS_FORCE_WAKE(dev) (INTEL_INFO(dev)->has_force_wake)
#include "i915_trace.h"
/**

38
drivers/gpu/drm/i915/i915_irq.c
Просмотреть файл

@ -510,7 +510,7 @@ out:
return ret;
}
static void pch_irq_handler(struct drm_device *dev, u32 pch_iir)
static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
@ -550,6 +550,35 @@ static void pch_irq_handler(struct drm_device *dev, u32 pch_iir)
DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
}
static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT)
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
(pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
SDE_AUDIO_POWER_SHIFT_CPT);
if (pch_iir & SDE_AUX_MASK_CPT)
DRM_DEBUG_DRIVER("AUX channel interrupt\n");
if (pch_iir & SDE_GMBUS_CPT)
DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
if (pch_iir & SDE_FDI_MASK_CPT)
for_each_pipe(pipe)
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
pipe_name(pipe),
I915_READ(FDI_RX_IIR(pipe)));
}
static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@ -591,7 +620,7 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
if (pch_iir & SDE_HOTPLUG_MASK_CPT)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
pch_irq_handler(dev, pch_iir);
cpt_irq_handler(dev, pch_iir);
/* clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
@ -684,7 +713,10 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
if (de_iir & DE_PCH_EVENT) {
if (pch_iir & hotplug_mask)
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
pch_irq_handler(dev, pch_iir);
if (HAS_PCH_CPT(dev))
cpt_irq_handler(dev, pch_iir);
else
ibx_irq_handler(dev, pch_iir);
}
if (de_iir & DE_PCU_EVENT) {

43
drivers/gpu/drm/i915/i915_reg.h
Просмотреть файл

@ -210,6 +210,14 @@
#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
#define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
/* IVB has funny definitions for which plane to flip. */
#define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19)
#define MI_DISPLAY_FLIP_IVB_PLANE_B (1 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
#define MI_SET_CONTEXT MI_INSTR(0x18, 0)
#define MI_MM_SPACE_GTT (1<<8)
#define MI_MM_SPACE_PHYSICAL (0<<8)
@ -3313,7 +3321,7 @@
/* PCH */
/* south display engine interrupt */
/* south display engine interrupt: IBX */
#define SDE_AUDIO_POWER_D (1 << 27)
#define SDE_AUDIO_POWER_C (1 << 26)
#define SDE_AUDIO_POWER_B (1 << 25)
@ -3349,15 +3357,44 @@
#define SDE_TRANSA_CRC_ERR (1 << 1)
#define SDE_TRANSA_FIFO_UNDER (1 << 0)
#define SDE_TRANS_MASK (0x3f)
/* CPT */
#define SDE_CRT_HOTPLUG_CPT (1 << 19)
/* south display engine interrupt: CPT/PPT */
#define SDE_AUDIO_POWER_D_CPT (1 << 31)
#define SDE_AUDIO_POWER_C_CPT (1 << 30)
#define SDE_AUDIO_POWER_B_CPT (1 << 29)
#define SDE_AUDIO_POWER_SHIFT_CPT 29
#define SDE_AUDIO_POWER_MASK_CPT (7 << 29)
#define SDE_AUXD_CPT (1 << 27)
#define SDE_AUXC_CPT (1 << 26)
#define SDE_AUXB_CPT (1 << 25)
#define SDE_AUX_MASK_CPT (7 << 25)
#define SDE_PORTD_HOTPLUG_CPT (1 << 23)
#define SDE_PORTC_HOTPLUG_CPT (1 << 22)
#define SDE_PORTB_HOTPLUG_CPT (1 << 21)
#define SDE_CRT_HOTPLUG_CPT (1 << 19)
#define SDE_HOTPLUG_MASK_CPT (SDE_CRT_HOTPLUG_CPT | \
SDE_PORTD_HOTPLUG_CPT | \
SDE_PORTC_HOTPLUG_CPT | \
SDE_PORTB_HOTPLUG_CPT)
#define SDE_GMBUS_CPT (1 << 17)
#define SDE_AUDIO_CP_REQ_C_CPT (1 << 10)
#define SDE_AUDIO_CP_CHG_C_CPT (1 << 9)
#define SDE_FDI_RXC_CPT (1 << 8)
#define SDE_AUDIO_CP_REQ_B_CPT (1 << 6)
#define SDE_AUDIO_CP_CHG_B_CPT (1 << 5)
#define SDE_FDI_RXB_CPT (1 << 4)
#define SDE_AUDIO_CP_REQ_A_CPT (1 << 2)
#define SDE_AUDIO_CP_CHG_A_CPT (1 << 1)
#define SDE_FDI_RXA_CPT (1 << 0)
#define SDE_AUDIO_CP_REQ_CPT (SDE_AUDIO_CP_REQ_C_CPT | \
SDE_AUDIO_CP_REQ_B_CPT | \
SDE_AUDIO_CP_REQ_A_CPT)
#define SDE_AUDIO_CP_CHG_CPT (SDE_AUDIO_CP_CHG_C_CPT | \
SDE_AUDIO_CP_CHG_B_CPT | \
SDE_AUDIO_CP_CHG_A_CPT)
#define SDE_FDI_MASK_CPT (SDE_FDI_RXC_CPT | \
SDE_FDI_RXB_CPT | \
SDE_FDI_RXA_CPT)
#define SDEISR 0xc4000
#define SDEIMR 0xc4004

19
drivers/gpu/drm/i915/intel_display.c
Просмотреть файл

@ -6158,17 +6158,34 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
uint32_t plane_bit = 0;
int ret;
ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
if (ret)
goto err;
switch(intel_crtc->plane) {
case PLANE_A:
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
break;
case PLANE_B:
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
break;
case PLANE_C:
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
break;
default:
WARN_ONCE(1, "unknown plane in flip command\n");
ret = -ENODEV;
goto err;
}
ret = intel_ring_begin(ring, 4);
if (ret)
goto err_unpin;
intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
intel_ring_emit(ring, (obj->gtt_offset));
intel_ring_emit(ring, (MI_NOOP));

21
drivers/gpu/drm/i915/intel_ringbuffer.c
Просмотреть файл

@ -266,10 +266,15 @@ u32 intel_ring_get_active_head(struct intel_ring_buffer *ring)
static int init_ring_common(struct intel_ring_buffer *ring)
{
drm_i915_private_t *dev_priv = ring->dev->dev_private;
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj = ring->obj;
int ret = 0;
u32 head;
if (HAS_FORCE_WAKE(dev))
gen6_gt_force_wake_get(dev_priv);
/* Stop the ring if it's running. */
I915_WRITE_CTL(ring, 0);
I915_WRITE_HEAD(ring, 0);
@ -317,7 +322,8 @@ static int init_ring_common(struct intel_ring_buffer *ring)
I915_READ_HEAD(ring),
I915_READ_TAIL(ring),
I915_READ_START(ring));
return -EIO;
ret = -EIO;
goto out;
}
if (!drm_core_check_feature(ring->dev, DRIVER_MODESET))
@ -326,9 +332,14 @@ static int init_ring_common(struct intel_ring_buffer *ring)
ring->head = I915_READ_HEAD(ring);
ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
ring->space = ring_space(ring);
ring->last_retired_head = -1;
}
return 0;
out:
if (HAS_FORCE_WAKE(dev))
gen6_gt_force_wake_put(dev_priv);
return ret;
}
static int
@ -987,6 +998,10 @@ static int intel_init_ring_buffer(struct drm_device *dev,
if (ret)
goto err_unref;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
goto err_unpin;
ring->virtual_start = ioremap_wc(dev->agp->base + obj->gtt_offset,
ring->size);
if (ring->virtual_start == NULL) {

21
drivers/gpu/drm/radeon/ni.c
Просмотреть файл

@ -460,15 +460,28 @@ static void cayman_gpu_init(struct radeon_device *rdev)
rdev->config.cayman.max_pipes_per_simd = 4;
rdev->config.cayman.max_tile_pipes = 2;
if ((rdev->pdev->device == 0x9900) ||
(rdev->pdev->device == 0x9901)) {
(rdev->pdev->device == 0x9901) ||
(rdev->pdev->device == 0x9905) ||
(rdev->pdev->device == 0x9906) ||
(rdev->pdev->device == 0x9907) ||
(rdev->pdev->device == 0x9908) ||
(rdev->pdev->device == 0x9909) ||
(rdev->pdev->device == 0x9910) ||
(rdev->pdev->device == 0x9917)) {
rdev->config.cayman.max_simds_per_se = 6;
rdev->config.cayman.max_backends_per_se = 2;
} else if ((rdev->pdev->device == 0x9903) ||
(rdev->pdev->device == 0x9904)) {
(rdev->pdev->device == 0x9904) ||
(rdev->pdev->device == 0x990A) ||
(rdev->pdev->device == 0x9913) ||
(rdev->pdev->device == 0x9918)) {
rdev->config.cayman.max_simds_per_se = 4;
rdev->config.cayman.max_backends_per_se = 2;
} else if ((rdev->pdev->device == 0x9990) ||
(rdev->pdev->device == 0x9991)) {
} else if ((rdev->pdev->device == 0x9919) ||
(rdev->pdev->device == 0x9990) ||
(rdev->pdev->device == 0x9991) ||
(rdev->pdev->device == 0x9994) ||
(rdev->pdev->device == 0x99A0)) {
rdev->config.cayman.max_simds_per_se = 3;
rdev->config.cayman.max_backends_per_se = 1;
} else {

15
drivers/gpu/drm/radeon/r600.c
Просмотреть файл

@ -2426,6 +2426,12 @@ int r600_startup(struct radeon_device *rdev)
if (r)
return r;
r = r600_audio_init(rdev);
if (r) {
DRM_ERROR("radeon: audio init failed\n");
return r;
}
return 0;
}
@ -2462,12 +2468,6 @@ int r600_resume(struct radeon_device *rdev)
return r;
}
r = r600_audio_init(rdev);
if (r) {
DRM_ERROR("radeon: audio resume failed\n");
return r;
}
return r;
}
@ -2577,9 +2577,6 @@ int r600_init(struct radeon_device *rdev)
rdev->accel_working = false;
}
r = r600_audio_init(rdev);
if (r)
return r; /* TODO error handling */
return 0;
}

5
drivers/gpu/drm/radeon/r600_audio.c
Просмотреть файл

@ -192,6 +192,7 @@ void r600_audio_set_clock(struct drm_encoder *encoder, int clock)
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
int base_rate = 48000;
switch (radeon_encoder->encoder_id) {
@ -217,8 +218,8 @@ void r600_audio_set_clock(struct drm_encoder *encoder, int clock)
WREG32(EVERGREEN_AUDIO_PLL1_DIV, clock * 10);
WREG32(EVERGREEN_AUDIO_PLL1_UNK, 0x00000071);
/* Some magic trigger or src sel? */
WREG32_P(0x5ac, 0x01, ~0x77);
/* Select DTO source */
WREG32(0x5ac, radeon_crtc->crtc_id);
} else {
switch (dig->dig_encoder) {
case 0:

1
drivers/gpu/drm/radeon/r600_hdmi.c
Просмотреть файл

@ -348,7 +348,6 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
HDMI0_AUDIO_SEND_MAX_PACKETS | /* send NULL packets if no audio is available */
HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
}

5
drivers/gpu/drm/radeon/radeon.h
Просмотреть файл

@ -1374,9 +1374,9 @@ struct cayman_asic {
struct si_asic {
unsigned max_shader_engines;
unsigned max_pipes_per_simd;
unsigned max_tile_pipes;
unsigned max_simds_per_se;
unsigned max_cu_per_sh;
unsigned max_sh_per_se;
unsigned max_backends_per_se;
unsigned max_texture_channel_caches;
unsigned max_gprs;
@ -1387,7 +1387,6 @@ struct si_asic {
unsigned sc_hiz_tile_fifo_size;
unsigned sc_earlyz_tile_fifo_size;
unsigned num_shader_engines;
unsigned num_tile_pipes;
unsigned num_backends_per_se;
unsigned backend_disable_mask_per_asic;

19
drivers/gpu/drm/radeon/radeon_gart.c
Просмотреть файл

@ -476,12 +476,18 @@ int radeon_vm_bo_add(struct radeon_device *rdev,
mutex_lock(&vm->mutex);
if (last_pfn > vm->last_pfn) {
/* grow va space 32M by 32M */
unsigned align = ((32 << 20) >> 12) - 1;
/* release mutex and lock in right order */
mutex_unlock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
radeon_vm_unbind_locked(rdev, vm);
mutex_lock(&vm->mutex);
/* and check again */
if (last_pfn > vm->last_pfn) {
/* grow va space 32M by 32M */
unsigned align = ((32 << 20) >> 12) - 1;
radeon_vm_unbind_locked(rdev, vm);
vm->last_pfn = (last_pfn + align) & ~align;
}
radeon_mutex_unlock(&rdev->cs_mutex);
vm->last_pfn = (last_pfn + align) & ~align;
}
head = &vm->va;
last_offset = 0;
@ -595,8 +601,8 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev,
if (bo_va == NULL)
return 0;
mutex_lock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
mutex_lock(&vm->mutex);
radeon_vm_bo_update_pte(rdev, vm, bo, NULL);
radeon_mutex_unlock(&rdev->cs_mutex);
list_del(&bo_va->vm_list);
@ -641,9 +647,8 @@ void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm)
struct radeon_bo_va *bo_va, *tmp;
int r;
mutex_lock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
mutex_lock(&vm->mutex);
radeon_vm_unbind_locked(rdev, vm);
radeon_mutex_unlock(&rdev->cs_mutex);

2
drivers/gpu/drm/radeon/radeon_kms.c
Просмотреть файл

@ -273,7 +273,7 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
break;
case RADEON_INFO_MAX_PIPES:
if (rdev->family >= CHIP_TAHITI)
value = rdev->config.si.max_pipes_per_simd;
value = rdev->config.si.max_cu_per_sh;
else if (rdev->family >= CHIP_CAYMAN)
value = rdev->config.cayman.max_pipes_per_simd;
else if (rdev->family >= CHIP_CEDAR)

12
drivers/gpu/drm/radeon/rs600.c
Просмотреть файл

@ -908,12 +908,6 @@ static int rs600_startup(struct radeon_device *rdev)
return r;
}
r = r600_audio_init(rdev);
if (r) {
dev_err(rdev->dev, "failed initializing audio\n");
return r;
}
r = radeon_ib_pool_start(rdev);
if (r)
return r;
@ -922,6 +916,12 @@ static int rs600_startup(struct radeon_device *rdev)
if (r)
return r;
r = r600_audio_init(rdev);
if (r) {
dev_err(rdev->dev, "failed initializing audio\n");
return r;
}
return 0;
}

12
drivers/gpu/drm/radeon/rs690.c
Просмотреть файл

@ -637,12 +637,6 @@ static int rs690_startup(struct radeon_device *rdev)
return r;
}
r = r600_audio_init(rdev);
if (r) {
dev_err(rdev->dev, "failed initializing audio\n");
return r;
}
r = radeon_ib_pool_start(rdev);
if (r)
return r;
@ -651,6 +645,12 @@ static int rs690_startup(struct radeon_device *rdev)
if (r)
return r;
r = r600_audio_init(rdev);
if (r) {
dev_err(rdev->dev, "failed initializing audio\n");
return r;
}
return 0;
}

18
drivers/gpu/drm/radeon/rv770.c
Просмотреть файл

@ -956,6 +956,12 @@ static int rv770_startup(struct radeon_device *rdev)
if (r)
return r;
r = r600_audio_init(rdev);
if (r) {
DRM_ERROR("radeon: audio init failed\n");
return r;
}
return 0;
}
@ -978,12 +984,6 @@ int rv770_resume(struct radeon_device *rdev)
return r;
}
r = r600_audio_init(rdev);
if (r) {
dev_err(rdev->dev, "radeon: audio init failed\n");
return r;
}
return r;
}
@ -1092,12 +1092,6 @@ int rv770_init(struct radeon_device *rdev)
rdev->accel_working = false;
}
r = r600_audio_init(rdev);
if (r) {
dev_err(rdev->dev, "radeon: audio init failed\n");
return r;
}
return 0;
}

481
drivers/gpu/drm/radeon/si.c
Просмотреть файл

@ -867,200 +867,6 @@ void dce6_bandwidth_update(struct radeon_device *rdev)
/*
* Core functions
*/
static u32 si_get_tile_pipe_to_backend_map(struct radeon_device *rdev,
u32 num_tile_pipes,
u32 num_backends_per_asic,
u32 *backend_disable_mask_per_asic,
u32 num_shader_engines)
{
u32 backend_map = 0;
u32 enabled_backends_mask = 0;
u32 enabled_backends_count = 0;
u32 num_backends_per_se;
u32 cur_pipe;
u32 swizzle_pipe[SI_MAX_PIPES];
u32 cur_backend = 0;
u32 i;
bool force_no_swizzle;
/* force legal values */
if (num_tile_pipes < 1)
num_tile_pipes = 1;
if (num_tile_pipes > rdev->config.si.max_tile_pipes)
num_tile_pipes = rdev->config.si.max_tile_pipes;
if (num_shader_engines < 1)
num_shader_engines = 1;
if (num_shader_engines > rdev->config.si.max_shader_engines)
num_shader_engines = rdev->config.si.max_shader_engines;
if (num_backends_per_asic < num_shader_engines)
num_backends_per_asic = num_shader_engines;
if (num_backends_per_asic > (rdev->config.si.max_backends_per_se * num_shader_engines))
num_backends_per_asic = rdev->config.si.max_backends_per_se * num_shader_engines;
/* make sure we have the same number of backends per se */
num_backends_per_asic = ALIGN(num_backends_per_asic, num_shader_engines);
/* set up the number of backends per se */
num_backends_per_se = num_backends_per_asic / num_shader_engines;
if (num_backends_per_se > rdev->config.si.max_backends_per_se) {
num_backends_per_se = rdev->config.si.max_backends_per_se;
num_backends_per_asic = num_backends_per_se * num_shader_engines;
}
/* create enable mask and count for enabled backends */
for (i = 0; i < SI_MAX_BACKENDS; ++i) {
if (((*backend_disable_mask_per_asic >> i) & 1) == 0) {
enabled_backends_mask |= (1 << i);
++enabled_backends_count;
}
if (enabled_backends_count == num_backends_per_asic)
break;
}
/* force the backends mask to match the current number of backends */
if (enabled_backends_count != num_backends_per_asic) {
u32 this_backend_enabled;
u32 shader_engine;
u32 backend_per_se;
enabled_backends_mask = 0;
enabled_backends_count = 0;
*backend_disable_mask_per_asic = SI_MAX_BACKENDS_MASK;
for (i = 0; i < SI_MAX_BACKENDS; ++i) {
/* calc the current se */
shader_engine = i / rdev->config.si.max_backends_per_se;
/* calc the backend per se */
backend_per_se = i % rdev->config.si.max_backends_per_se;
/* default to not enabled */
this_backend_enabled = 0;
if ((shader_engine < num_shader_engines) &&
(backend_per_se < num_backends_per_se))
this_backend_enabled = 1;
if (this_backend_enabled) {
enabled_backends_mask |= (1 << i);
*backend_disable_mask_per_asic &= ~(1 << i);
++enabled_backends_count;
}
}
}
memset((uint8_t *)&swizzle_pipe[0], 0, sizeof(u32) * SI_MAX_PIPES);
switch (rdev->family) {
case CHIP_TAHITI:
case CHIP_PITCAIRN:
case CHIP_VERDE:
force_no_swizzle = true;
break;
default:
force_no_swizzle = false;
break;
}
if (force_no_swizzle) {
bool last_backend_enabled = false;
force_no_swizzle = false;
for (i = 0; i < SI_MAX_BACKENDS; ++i) {
if (((enabled_backends_mask >> i) & 1) == 1) {
if (last_backend_enabled)
force_no_swizzle = true;
last_backend_enabled = true;
} else
last_backend_enabled = false;
}
}
switch (num_tile_pipes) {
case 1:
case 3:
case 5:
case 7:
DRM_ERROR("odd number of pipes!\n");
break;
case 2:
swizzle_pipe[0] = 0;
swizzle_pipe[1] = 1;
break;
case 4:
if (force_no_swizzle) {
swizzle_pipe[0] = 0;
swizzle_pipe[1] = 1;
swizzle_pipe[2] = 2;
swizzle_pipe[3] = 3;
} else {
swizzle_pipe[0] = 0;
swizzle_pipe[1] = 2;
swizzle_pipe[2] = 1;
swizzle_pipe[3] = 3;
}
break;
case 6:
if (force_no_swizzle) {
swizzle_pipe[0] = 0;
swizzle_pipe[1] = 1;
swizzle_pipe[2] = 2;
swizzle_pipe[3] = 3;
swizzle_pipe[4] = 4;
swizzle_pipe[5] = 5;
} else {
swizzle_pipe[0] = 0;
swizzle_pipe[1] = 2;
swizzle_pipe[2] = 4;
swizzle_pipe[3] = 1;
swizzle_pipe[4] = 3;
swizzle_pipe[5] = 5;
}
break;
case 8:
if (force_no_swizzle) {
swizzle_pipe[0] = 0;
swizzle_pipe[1] = 1;
swizzle_pipe[2] = 2;
swizzle_pipe[3] = 3;
swizzle_pipe[4] = 4;
swizzle_pipe[5] = 5;
swizzle_pipe[6] = 6;
swizzle_pipe[7] = 7;
} else {
swizzle_pipe[0] = 0;
swizzle_pipe[1] = 2;
swizzle_pipe[2] = 4;
swizzle_pipe[3] = 6;
swizzle_pipe[4] = 1;
swizzle_pipe[5] = 3;
swizzle_pipe[6] = 5;
swizzle_pipe[7] = 7;
}
break;
}
for (cur_pipe = 0; cur_pipe < num_tile_pipes; ++cur_pipe) {
while (((1 << cur_backend) & enabled_backends_mask) == 0)
cur_backend = (cur_backend + 1) % SI_MAX_BACKENDS;
backend_map |= (((cur_backend & 0xf) << (swizzle_pipe[cur_pipe] * 4)));
cur_backend = (cur_backend + 1) % SI_MAX_BACKENDS;
}
return backend_map;
}
static u32 si_get_disable_mask_per_asic(struct radeon_device *rdev,
u32 disable_mask_per_se,
u32 max_disable_mask_per_se,
u32 num_shader_engines)
{
u32 disable_field_width_per_se = r600_count_pipe_bits(disable_mask_per_se);
u32 disable_mask_per_asic = disable_mask_per_se & max_disable_mask_per_se;
if (num_shader_engines == 1)
return disable_mask_per_asic;
else if (num_shader_engines == 2)
return disable_mask_per_asic | (disable_mask_per_asic << disable_field_width_per_se);
else
return 0xffffffff;
}
static void si_tiling_mode_table_init(struct radeon_device *rdev)
{
const u32 num_tile_mode_states = 32;
@ -1562,18 +1368,151 @@ static void si_tiling_mode_table_init(struct radeon_device *rdev)
DRM_ERROR("unknown asic: 0x%x\n", rdev->family);
}
static void si_select_se_sh(struct radeon_device *rdev,
u32 se_num, u32 sh_num)
{
u32 data = INSTANCE_BROADCAST_WRITES;
if ((se_num == 0xffffffff) && (sh_num == 0xffffffff))
data = SH_BROADCAST_WRITES | SE_BROADCAST_WRITES;
else if (se_num == 0xffffffff)
data |= SE_BROADCAST_WRITES | SH_INDEX(sh_num);
else if (sh_num == 0xffffffff)
data |= SH_BROADCAST_WRITES | SE_INDEX(se_num);
else
data |= SH_INDEX(sh_num) | SE_INDEX(se_num);
WREG32(GRBM_GFX_INDEX, data);
}
static u32 si_create_bitmask(u32 bit_width)
{
u32 i, mask = 0;
for (i = 0; i < bit_width; i++) {
mask <<= 1;
mask |= 1;
}
return mask;
}
static u32 si_get_cu_enabled(struct radeon_device *rdev, u32 cu_per_sh)
{
u32 data, mask;
data = RREG32(CC_GC_SHADER_ARRAY_CONFIG);
if (data & 1)
data &= INACTIVE_CUS_MASK;
else
data = 0;
data |= RREG32(GC_USER_SHADER_ARRAY_CONFIG);
data >>= INACTIVE_CUS_SHIFT;
mask = si_create_bitmask(cu_per_sh);
return ~data & mask;
}
static void si_setup_spi(struct radeon_device *rdev,
u32 se_num, u32 sh_per_se,
u32 cu_per_sh)
{
int i, j, k;
u32 data, mask, active_cu;
for (i = 0; i < se_num; i++) {
for (j = 0; j < sh_per_se; j++) {
si_select_se_sh(rdev, i, j);
data = RREG32(SPI_STATIC_THREAD_MGMT_3);
active_cu = si_get_cu_enabled(rdev, cu_per_sh);
mask = 1;
for (k = 0; k < 16; k++) {
mask <<= k;
if (active_cu & mask) {
data &= ~mask;
WREG32(SPI_STATIC_THREAD_MGMT_3, data);
break;
}
}
}
}
si_select_se_sh(rdev, 0xffffffff, 0xffffffff);
}
static u32 si_get_rb_disabled(struct radeon_device *rdev,
u32 max_rb_num, u32 se_num,
u32 sh_per_se)
{
u32 data, mask;
data = RREG32(CC_RB_BACKEND_DISABLE);
if (data & 1)
data &= BACKEND_DISABLE_MASK;
else
data = 0;
data |= RREG32(GC_USER_RB_BACKEND_DISABLE);
data >>= BACKEND_DISABLE_SHIFT;
mask = si_create_bitmask(max_rb_num / se_num / sh_per_se);
return data & mask;
}
static void si_setup_rb(struct radeon_device *rdev,
u32 se_num, u32 sh_per_se,
u32 max_rb_num)
{
int i, j;
u32 data, mask;
u32 disabled_rbs = 0;
u32 enabled_rbs = 0;
for (i = 0; i < se_num; i++) {
for (j = 0; j < sh_per_se; j++) {
si_select_se_sh(rdev, i, j);
data = si_get_rb_disabled(rdev, max_rb_num, se_num, sh_per_se);
disabled_rbs |= data << ((i * sh_per_se + j) * TAHITI_RB_BITMAP_WIDTH_PER_SH);
}
}
si_select_se_sh(rdev, 0xffffffff, 0xffffffff);
mask = 1;
for (i = 0; i < max_rb_num; i++) {
if (!(disabled_rbs & mask))
enabled_rbs |= mask;
mask <<= 1;
}
for (i = 0; i < se_num; i++) {
si_select_se_sh(rdev, i, 0xffffffff);
data = 0;
for (j = 0; j < sh_per_se; j++) {
switch (enabled_rbs & 3) {
case 1:
data |= (RASTER_CONFIG_RB_MAP_0 << (i * sh_per_se + j) * 2);
break;
case 2:
data |= (RASTER_CONFIG_RB_MAP_3 << (i * sh_per_se + j) * 2);
break;
case 3:
default:
data |= (RASTER_CONFIG_RB_MAP_2 << (i * sh_per_se + j) * 2);
break;
}
enabled_rbs >>= 2;
}
WREG32(PA_SC_RASTER_CONFIG, data);
}
si_select_se_sh(rdev, 0xffffffff, 0xffffffff);
}
static void si_gpu_init(struct radeon_device *rdev)
{
u32 cc_rb_backend_disable = 0;
u32 cc_gc_shader_array_config;
u32 gb_addr_config = 0;
u32 mc_shared_chmap, mc_arb_ramcfg;
u32 gb_backend_map;
u32 cgts_tcc_disable;
u32 sx_debug_1;
u32 gc_user_shader_array_config;
u32 gc_user_rb_backend_disable;
u32 cgts_user_tcc_disable;
u32 hdp_host_path_cntl;
u32 tmp;
int i, j;
@ -1581,9 +1520,9 @@ static void si_gpu_init(struct radeon_device *rdev)
switch (rdev->family) {
case CHIP_TAHITI:
rdev->config.si.max_shader_engines = 2;
rdev->config.si.max_pipes_per_simd = 4;
rdev->config.si.max_tile_pipes = 12;
rdev->config.si.max_simds_per_se = 8;
rdev->config.si.max_cu_per_sh = 8;
rdev->config.si.max_sh_per_se = 2;
rdev->config.si.max_backends_per_se = 4;
rdev->config.si.max_texture_channel_caches = 12;
rdev->config.si.max_gprs = 256;
@ -1594,12 +1533,13 @@ static void si_gpu_init(struct radeon_device *rdev)
rdev->config.si.sc_prim_fifo_size_backend = 0x100;
rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
gb_addr_config = TAHITI_GB_ADDR_CONFIG_GOLDEN;
break;
case CHIP_PITCAIRN:
rdev->config.si.max_shader_engines = 2;
rdev->config.si.max_pipes_per_simd = 4;
rdev->config.si.max_tile_pipes = 8;
rdev->config.si.max_simds_per_se = 5;
rdev->config.si.max_cu_per_sh = 5;
rdev->config.si.max_sh_per_se = 2;
rdev->config.si.max_backends_per_se = 4;
rdev->config.si.max_texture_channel_caches = 8;
rdev->config.si.max_gprs = 256;
@ -1610,13 +1550,14 @@ static void si_gpu_init(struct radeon_device *rdev)
rdev->config.si.sc_prim_fifo_size_backend = 0x100;
rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
gb_addr_config = TAHITI_GB_ADDR_CONFIG_GOLDEN;
break;
case CHIP_VERDE:
default:
rdev->config.si.max_shader_engines = 1;
rdev->config.si.max_pipes_per_simd = 4;
rdev->config.si.max_tile_pipes = 4;
rdev->config.si.max_simds_per_se = 2;
rdev->config.si.max_cu_per_sh = 2;
rdev->config.si.max_sh_per_se = 2;
rdev->config.si.max_backends_per_se = 4;
rdev->config.si.max_texture_channel_caches = 4;
rdev->config.si.max_gprs = 256;
@ -1627,6 +1568,7 @@ static void si_gpu_init(struct radeon_device *rdev)
rdev->config.si.sc_prim_fifo_size_backend = 0x40;
rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
gb_addr_config = VERDE_GB_ADDR_CONFIG_GOLDEN;
break;
}
@ -1648,31 +1590,7 @@ static void si_gpu_init(struct radeon_device *rdev)
mc_shared_chmap = RREG32(MC_SHARED_CHMAP);
mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG);
cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE);
cc_gc_shader_array_config = RREG32(CC_GC_SHADER_ARRAY_CONFIG);
cgts_tcc_disable = 0xffff0000;
for (i = 0; i < rdev->config.si.max_texture_channel_caches; i++)
cgts_tcc_disable &= ~(1 << (16 + i));
gc_user_rb_backend_disable = RREG32(GC_USER_RB_BACKEND_DISABLE);
gc_user_shader_array_config = RREG32(GC_USER_SHADER_ARRAY_CONFIG);
cgts_user_tcc_disable = RREG32(CGTS_USER_TCC_DISABLE);
rdev->config.si.num_shader_engines = rdev->config.si.max_shader_engines;
rdev->config.si.num_tile_pipes = rdev->config.si.max_tile_pipes;
tmp = ((~gc_user_rb_backend_disable) & BACKEND_DISABLE_MASK) >> BACKEND_DISABLE_SHIFT;
rdev->config.si.num_backends_per_se = r600_count_pipe_bits(tmp);
tmp = (gc_user_rb_backend_disable & BACKEND_DISABLE_MASK) >> BACKEND_DISABLE_SHIFT;
rdev->config.si.backend_disable_mask_per_asic =
si_get_disable_mask_per_asic(rdev, tmp, SI_MAX_BACKENDS_PER_SE_MASK,
rdev->config.si.num_shader_engines);
rdev->config.si.backend_map =
si_get_tile_pipe_to_backend_map(rdev, rdev->config.si.num_tile_pipes,
rdev->config.si.num_backends_per_se *
rdev->config.si.num_shader_engines,
&rdev->config.si.backend_disable_mask_per_asic,
rdev->config.si.num_shader_engines);
tmp = ((~cgts_user_tcc_disable) & TCC_DISABLE_MASK) >> TCC_DISABLE_SHIFT;
rdev->config.si.num_texture_channel_caches = r600_count_pipe_bits(tmp);
rdev->config.si.mem_max_burst_length_bytes = 256;
tmp = (mc_arb_ramcfg & NOOFCOLS_MASK) >> NOOFCOLS_SHIFT;
rdev->config.si.mem_row_size_in_kb = (4 * (1 << (8 + tmp))) / 1024;
@ -1683,55 +1601,8 @@ static void si_gpu_init(struct radeon_device *rdev)
rdev->config.si.num_gpus = 1;
rdev->config.si.multi_gpu_tile_size = 64;
gb_addr_config = 0;
switch (rdev->config.si.num_tile_pipes) {
case 1:
gb_addr_config |= NUM_PIPES(0);
break;
case 2:
gb_addr_config |= NUM_PIPES(1);
break;
case 4:
gb_addr_config |= NUM_PIPES(2);
break;
case 8:
default:
gb_addr_config |= NUM_PIPES(3);
break;
}
tmp = (rdev->config.si.mem_max_burst_length_bytes / 256) - 1;
gb_addr_config |= PIPE_INTERLEAVE_SIZE(tmp);
gb_addr_config |= NUM_SHADER_ENGINES(rdev->config.si.num_shader_engines - 1);
tmp = (rdev->config.si.shader_engine_tile_size / 16) - 1;
gb_addr_config |= SHADER_ENGINE_TILE_SIZE(tmp);
switch (rdev->config.si.num_gpus) {
case 1:
default:
gb_addr_config |= NUM_GPUS(0);
break;
case 2:
gb_addr_config |= NUM_GPUS(1);
break;
case 4:
gb_addr_config |= NUM_GPUS(2);
break;
}
switch (rdev->config.si.multi_gpu_tile_size) {
case 16:
gb_addr_config |= MULTI_GPU_TILE_SIZE(0);
break;
case 32:
default:
gb_addr_config |= MULTI_GPU_TILE_SIZE(1);
break;
case 64:
gb_addr_config |= MULTI_GPU_TILE_SIZE(2);
break;
case 128:
gb_addr_config |= MULTI_GPU_TILE_SIZE(3);
break;
}
/* fix up row size */
gb_addr_config &= ~ROW_SIZE_MASK;
switch (rdev->config.si.mem_row_size_in_kb) {
case 1:
default:
@ -1745,26 +1616,6 @@ static void si_gpu_init(struct radeon_device *rdev)
break;
}
tmp = (gb_addr_config & NUM_PIPES_MASK) >> NUM_PIPES_SHIFT;
rdev->config.si.num_tile_pipes = (1 << tmp);
tmp = (gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT;
rdev->config.si.mem_max_burst_length_bytes = (tmp + 1) * 256;
tmp = (gb_addr_config & NUM_SHADER_ENGINES_MASK) >> NUM_SHADER_ENGINES_SHIFT;
rdev->config.si.num_shader_engines = tmp + 1;
tmp = (gb_addr_config & NUM_GPUS_MASK) >> NUM_GPUS_SHIFT;
rdev->config.si.num_gpus = tmp + 1;
tmp = (gb_addr_config & MULTI_GPU_TILE_SIZE_MASK) >> MULTI_GPU_TILE_SIZE_SHIFT;
rdev->config.si.multi_gpu_tile_size = 1 << tmp;
tmp = (gb_addr_config & ROW_SIZE_MASK) >> ROW_SIZE_SHIFT;
rdev->config.si.mem_row_size_in_kb = 1 << tmp;
gb_backend_map =
si_get_tile_pipe_to_backend_map(rdev, rdev->config.si.num_tile_pipes,
rdev->config.si.num_backends_per_se *
rdev->config.si.num_shader_engines,
&rdev->config.si.backend_disable_mask_per_asic,
rdev->config.si.num_shader_engines);
/* setup tiling info dword. gb_addr_config is not adequate since it does
* not have bank info, so create a custom tiling dword.
* bits 3:0 num_pipes
@ -1789,34 +1640,30 @@ static void si_gpu_init(struct radeon_device *rdev)
rdev->config.si.tile_config |= (3 << 0);
break;
}
rdev->config.si.tile_config |=
((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;
if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT)
rdev->config.si.tile_config |= 1 << 4;
else
rdev->config.si.tile_config |= 0 << 4;
rdev->config.si.tile_config |=
((gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT) << 8;
rdev->config.si.tile_config |=
((gb_addr_config & ROW_SIZE_MASK) >> ROW_SIZE_SHIFT) << 12;
rdev->config.si.backend_map = gb_backend_map;
WREG32(GB_ADDR_CONFIG, gb_addr_config);
WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
WREG32(HDP_ADDR_CONFIG, gb_addr_config);
/* primary versions */
WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_GC_SHADER_ARRAY_CONFIG, cc_gc_shader_array_config);
WREG32(CGTS_TCC_DISABLE, cgts_tcc_disable);
/* user versions */
WREG32(GC_USER_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(GC_USER_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(GC_USER_SHADER_ARRAY_CONFIG, cc_gc_shader_array_config);
WREG32(CGTS_USER_TCC_DISABLE, cgts_tcc_disable);
si_tiling_mode_table_init(rdev);
si_setup_rb(rdev, rdev->config.si.max_shader_engines,
rdev->config.si.max_sh_per_se,
rdev->config.si.max_backends_per_se);
si_setup_spi(rdev, rdev->config.si.max_shader_engines,
rdev->config.si.max_sh_per_se,
rdev->config.si.max_cu_per_sh);
/* set HW defaults for 3D engine */
WREG32(CP_QUEUE_THRESHOLDS, (ROQ_IB1_START(0x16) |
ROQ_IB2_START(0x2b)));

19
drivers/gpu/drm/radeon/sid.h
Просмотреть файл

@ -24,6 +24,11 @@
#ifndef SI_H
#define SI_H
#define TAHITI_RB_BITMAP_WIDTH_PER_SH 2
#define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003
#define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002
#define CG_MULT_THERMAL_STATUS 0x714
#define ASIC_MAX_TEMP(x) ((x) << 0)
#define ASIC_MAX_TEMP_MASK 0x000001ff
@ -408,6 +413,12 @@
#define SOFT_RESET_IA (1 << 15)
#define GRBM_GFX_INDEX 0x802C
#define INSTANCE_INDEX(x) ((x) << 0)
#define SH_INDEX(x) ((x) << 8)
#define SE_INDEX(x) ((x) << 16)
#define SH_BROADCAST_WRITES (1 << 29)
#define INSTANCE_BROADCAST_WRITES (1 << 30)
#define SE_BROADCAST_WRITES (1 << 31)
#define GRBM_INT_CNTL 0x8060
# define RDERR_INT_ENABLE (1 << 0)
@ -480,6 +491,8 @@
#define VGT_TF_MEMORY_BASE 0x89B8
#define CC_GC_SHADER_ARRAY_CONFIG 0x89bc
#define INACTIVE_CUS_MASK 0xFFFF0000
#define INACTIVE_CUS_SHIFT 16
#define GC_USER_SHADER_ARRAY_CONFIG 0x89c0
#define PA_CL_ENHANCE 0x8A14
@ -688,6 +701,12 @@
#define RLC_MC_CNTL 0xC344
#define RLC_UCODE_CNTL 0xC348
#define PA_SC_RASTER_CONFIG 0x28350
# define RASTER_CONFIG_RB_MAP_0 0
# define RASTER_CONFIG_RB_MAP_1 1
# define RASTER_CONFIG_RB_MAP_2 2
# define RASTER_CONFIG_RB_MAP_3 3
#define VGT_EVENT_INITIATOR 0x28a90
# define SAMPLE_STREAMOUTSTATS1 (1 << 0)
# define SAMPLE_STREAMOUTSTATS2 (2 << 0)

12
drivers/i2c/muxes/Kconfig
Просмотреть файл

@ -37,4 +37,16 @@ config I2C_MUX_PCA954x
This driver can also be built as a module. If so, the module
will be called i2c-mux-pca954x.
config I2C_MUX_PINCTRL
tristate "pinctrl-based I2C multiplexer"
depends on PINCTRL
help
If you say yes to this option, support will be included for an I2C
multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
This is useful for SoCs whose I2C module's signals can be routed to
different sets of pins at run-time.
This driver can also be built as a module. If so, the module will be
called pinctrl-i2cmux.
endmenu

1
drivers/i2c/muxes/Makefile
Просмотреть файл

@ -4,5 +4,6 @@
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG

279
drivers/i2c/muxes/i2c-mux-pinctrl.c Normal file
Просмотреть файл

@ -0,0 +1,279 @@
/*
* I2C multiplexer using pinctrl API
*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
#include <linux/i2c-mux-pinctrl.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
struct i2c_mux_pinctrl {
struct device *dev;
struct i2c_mux_pinctrl_platform_data *pdata;
struct pinctrl *pinctrl;
struct pinctrl_state **states;
struct pinctrl_state *state_idle;
struct i2c_adapter *parent;
struct i2c_adapter **busses;
};
static int i2c_mux_pinctrl_select(struct i2c_adapter *adap, void *data,
u32 chan)
{
struct i2c_mux_pinctrl *mux = data;
return pinctrl_select_state(mux->pinctrl, mux->states[chan]);
}
static int i2c_mux_pinctrl_deselect(struct i2c_adapter *adap, void *data,
u32 chan)
{
struct i2c_mux_pinctrl *mux = data;
return pinctrl_select_state(mux->pinctrl, mux->state_idle);
}
#ifdef CONFIG_OF
static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int num_names, i, ret;
struct device_node *adapter_np;
struct i2c_adapter *adapter;
if (!np)
return 0;
mux->pdata = devm_kzalloc(&pdev->dev, sizeof(*mux->pdata), GFP_KERNEL);
if (!mux->pdata) {
dev_err(mux->dev,
"Cannot allocate i2c_mux_pinctrl_platform_data\n");
return -ENOMEM;
}
num_names = of_property_count_strings(np, "pinctrl-names");
if (num_names < 0) {
dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
num_names);
return num_names;
}
mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
sizeof(*mux->pdata->pinctrl_states) * num_names,
GFP_KERNEL);
if (!mux->pdata->pinctrl_states) {
dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
return -ENOMEM;
}
for (i = 0; i < num_names; i++) {
ret = of_property_read_string_index(np, "pinctrl-names", i,
&mux->pdata->pinctrl_states[mux->pdata->bus_count]);
if (ret < 0) {
dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
ret);
return ret;
}
if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
"idle")) {
if (i != num_names - 1) {
dev_err(mux->dev, "idle state must be last\n");
return -EINVAL;
}
mux->pdata->pinctrl_state_idle = "idle";
} else {
mux->pdata->bus_count++;
}
}
adapter_np = of_parse_phandle(np, "i2c-parent", 0);
if (!adapter_np) {
dev_err(mux->dev, "Cannot parse i2c-parent\n");
return -ENODEV;
}
adapter = of_find_i2c_adapter_by_node(adapter_np);
if (!adapter) {
dev_err(mux->dev, "Cannot find parent bus\n");
return -ENODEV;
}
mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
put_device(&adapter->dev);
return 0;
}
#else
static inline int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
struct platform_device *pdev)
{
return 0;
}
#endif
static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev)
{
struct i2c_mux_pinctrl *mux;
int (*deselect)(struct i2c_adapter *, void *, u32);
int i, ret;
mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
if (!mux) {
dev_err(&pdev->dev, "Cannot allocate i2c_mux_pinctrl\n");
ret = -ENOMEM;
goto err;
}
platform_set_drvdata(pdev, mux);
mux->dev = &pdev->dev;
mux->pdata = pdev->dev.platform_data;
if (!mux->pdata) {
ret = i2c_mux_pinctrl_parse_dt(mux, pdev);
if (ret < 0)
goto err;
}
if (!mux->pdata) {
dev_err(&pdev->dev, "Missing platform data\n");
ret = -ENODEV;
goto err;
}
mux->states = devm_kzalloc(&pdev->dev,
sizeof(*mux->states) * mux->pdata->bus_count,
GFP_KERNEL);
if (!mux->states) {
dev_err(&pdev->dev, "Cannot allocate states\n");
ret = -ENOMEM;
goto err;
}
mux->busses = devm_kzalloc(&pdev->dev,
sizeof(mux->busses) * mux->pdata->bus_count,
GFP_KERNEL);
if (!mux->states) {
dev_err(&pdev->dev, "Cannot allocate busses\n");
ret = -ENOMEM;
goto err;
}
mux->pinctrl = devm_pinctrl_get(&pdev->dev);
if (IS_ERR(mux->pinctrl)) {
ret = PTR_ERR(mux->pinctrl);
dev_err(&pdev->dev, "Cannot get pinctrl: %d\n", ret);
goto err;
}
for (i = 0; i < mux->pdata->bus_count; i++) {
mux->states[i] = pinctrl_lookup_state(mux->pinctrl,
mux->pdata->pinctrl_states[i]);
if (IS_ERR(mux->states[i])) {
ret = PTR_ERR(mux->states[i]);
dev_err(&pdev->dev,
"Cannot look up pinctrl state %s: %d\n",
mux->pdata->pinctrl_states[i], ret);
goto err;
}
}
if (mux->pdata->pinctrl_state_idle) {
mux->state_idle = pinctrl_lookup_state(mux->pinctrl,
mux->pdata->pinctrl_state_idle);
if (IS_ERR(mux->state_idle)) {
ret = PTR_ERR(mux->state_idle);
dev_err(&pdev->dev,
"Cannot look up pinctrl state %s: %d\n",
mux->pdata->pinctrl_state_idle, ret);
goto err;
}
deselect = i2c_mux_pinctrl_deselect;
} else {
deselect = NULL;
}
mux->parent = i2c_get_adapter(mux->pdata->parent_bus_num);
if (!mux->parent) {
dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
mux->pdata->parent_bus_num);
ret = -ENODEV;
goto err;
}
for (i = 0; i < mux->pdata->bus_count; i++) {
u32 bus = mux->pdata->base_bus_num ?
(mux->pdata->base_bus_num + i) : 0;
mux->busses[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev,
mux, bus, i,
i2c_mux_pinctrl_select,
deselect);
if (!mux->busses[i]) {
ret = -ENODEV;
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
goto err_del_adapter;
}
}
return 0;
err_del_adapter:
for (; i > 0; i--)
i2c_del_mux_adapter(mux->busses[i - 1]);
i2c_put_adapter(mux->parent);
err:
return ret;
}
static int __devexit i2c_mux_pinctrl_remove(struct platform_device *pdev)
{
struct i2c_mux_pinctrl *mux = platform_get_drvdata(pdev);
int i;
for (i = 0; i < mux->pdata->bus_count; i++)
i2c_del_mux_adapter(mux->busses[i]);
i2c_put_adapter(mux->parent);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id i2c_mux_pinctrl_of_match[] __devinitconst = {
{ .compatible = "i2c-mux-pinctrl", },
{},
};
MODULE_DEVICE_TABLE(of, i2c_mux_pinctrl_of_match);
#endif
static struct platform_driver i2c_mux_pinctrl_driver = {
.driver = {
.name = "i2c-mux-pinctrl",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(i2c_mux_pinctrl_of_match),
},
.probe = i2c_mux_pinctrl_probe,
.remove = __devexit_p(i2c_mux_pinctrl_remove),
};
module_platform_driver(i2c_mux_pinctrl_driver);
MODULE_DESCRIPTION("pinctrl-based I2C multiplexer driver");
MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:i2c-mux-pinctrl");

4
drivers/infiniband/hw/cxgb4/cm.c
Просмотреть файл

@ -1593,6 +1593,10 @@ static int import_ep(struct c4iw_ep *ep, __be32 peer_ip, struct dst_entry *dst,
struct net_device *pdev;
pdev = ip_dev_find(&init_net, peer_ip);
if (!pdev) {
err = -ENODEV;
goto out;
}
ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
n, pdev, 0);
if (!ep->l2t)

21
drivers/infiniband/hw/mlx4/main.c
Просмотреть файл

@ -140,7 +140,7 @@ static int mlx4_ib_query_device(struct ib_device *ibdev,
props->max_mr_size = ~0ull;
props->page_size_cap = dev->dev->caps.page_size_cap;
props->max_qp = dev->dev->caps.num_qps - dev->dev->caps.reserved_qps;
props->max_qp_wr = dev->dev->caps.max_wqes;
props->max_qp_wr = dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE;
props->max_sge = min(dev->dev->caps.max_sq_sg,
dev->dev->caps.max_rq_sg);
props->max_cq = dev->dev->caps.num_cqs - dev->dev->caps.reserved_cqs;
@ -1084,12 +1084,9 @@ static void mlx4_ib_alloc_eqs(struct mlx4_dev *dev, struct mlx4_ib_dev *ibdev)
int total_eqs = 0;
int i, j, eq;
/* Init eq table */
ibdev->eq_table = NULL;
ibdev->eq_added = 0;
/* Legacy mode? */
if (dev->caps.comp_pool == 0)
/* Legacy mode or comp_pool is not large enough */
if (dev->caps.comp_pool == 0 ||
dev->caps.num_ports > dev->caps.comp_pool)
return;
eq_per_port = rounddown_pow_of_two(dev->caps.comp_pool/
@ -1135,7 +1132,10 @@ static void mlx4_ib_alloc_eqs(struct mlx4_dev *dev, struct mlx4_ib_dev *ibdev)
static void mlx4_ib_free_eqs(struct mlx4_dev *dev, struct mlx4_ib_dev *ibdev)
{
int i;
int total_eqs;
/* no additional eqs were added */
if (!ibdev->eq_table)
return;
/* Reset the advertised EQ number */
ibdev->ib_dev.num_comp_vectors = dev->caps.num_comp_vectors;
@ -1148,12 +1148,7 @@ static void mlx4_ib_free_eqs(struct mlx4_dev *dev, struct mlx4_ib_dev *ibdev)
mlx4_release_eq(dev, ibdev->eq_table[i]);
}
total_eqs = dev->caps.num_comp_vectors + ibdev->eq_added;
memset(ibdev->eq_table, 0, total_eqs * sizeof(int));
kfree(ibdev->eq_table);
ibdev->eq_table = NULL;
ibdev->eq_added = 0;
}
static void *mlx4_ib_add(struct mlx4_dev *dev)

8
drivers/infiniband/hw/mlx4/mlx4_ib.h
Просмотреть файл

@ -44,6 +44,14 @@
#include <linux/mlx4/device.h>
#include <linux/mlx4/doorbell.h>
enum {
MLX4_IB_SQ_MIN_WQE_SHIFT = 6,
MLX4_IB_MAX_HEADROOM = 2048
};
#define MLX4_IB_SQ_HEADROOM(shift) ((MLX4_IB_MAX_HEADROOM >> (shift)) + 1)
#define MLX4_IB_SQ_MAX_SPARE (MLX4_IB_SQ_HEADROOM(MLX4_IB_SQ_MIN_WQE_SHIFT))
struct mlx4_ib_ucontext {
struct ib_ucontext ibucontext;
struct mlx4_uar uar;

21
drivers/infiniband/hw/mlx4/qp.c
Просмотреть файл

@ -310,8 +310,8 @@ static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
int is_user, int has_rq, struct mlx4_ib_qp *qp)
{
/* Sanity check RQ size before proceeding */
if (cap->max_recv_wr > dev->dev->caps.max_wqes ||
cap->max_recv_sge > dev->dev->caps.max_rq_sg)
if (cap->max_recv_wr > dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE ||
cap->max_recv_sge > min(dev->dev->caps.max_sq_sg, dev->dev->caps.max_rq_sg))
return -EINVAL;
if (!has_rq) {
@ -329,8 +329,17 @@ static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
qp->rq.wqe_shift = ilog2(qp->rq.max_gs * sizeof (struct mlx4_wqe_data_seg));
}
cap->max_recv_wr = qp->rq.max_post = qp->rq.wqe_cnt;
cap->max_recv_sge = qp->rq.max_gs;
/* leave userspace return values as they were, so as not to break ABI */
if (is_user) {
cap->max_recv_wr = qp->rq.max_post = qp->rq.wqe_cnt;
cap->max_recv_sge = qp->rq.max_gs;
} else {
cap->max_recv_wr = qp->rq.max_post =
min(dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE, qp->rq.wqe_cnt);
cap->max_recv_sge = min(qp->rq.max_gs,
min(dev->dev->caps.max_sq_sg,
dev->dev->caps.max_rq_sg));
}
return 0;
}
@ -341,8 +350,8 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap,
int s;
/* Sanity check SQ size before proceeding */
if (cap->max_send_wr > dev->dev->caps.max_wqes ||
cap->max_send_sge > dev->dev->caps.max_sq_sg ||
if (cap->max_send_wr > (dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE) ||
cap->max_send_sge > min(dev->dev->caps.max_sq_sg, dev->dev->caps.max_rq_sg) ||
cap->max_inline_data + send_wqe_overhead(type, qp->flags) +
sizeof (struct mlx4_wqe_inline_seg) > dev->dev->caps.max_sq_desc_sz)
return -EINVAL;

1
drivers/infiniband/hw/ocrdma/ocrdma.h
Просмотреть файл

@ -231,7 +231,6 @@ struct ocrdma_qp_hwq_info {
u32 entry_size;
u32 max_cnt;
u32 max_wqe_idx;
u32 free_delta;
u16 dbid; /* qid, where to ring the doorbell. */
u32 len;
dma_addr_t pa;

5
drivers/infiniband/hw/ocrdma/ocrdma_abi.h
Просмотреть файл

@ -101,8 +101,6 @@ struct ocrdma_create_qp_uresp {
u32 rsvd1;
u32 num_wqe_allocated;
u32 num_rqe_allocated;
u32 free_wqe_delta;
u32 free_rqe_delta;
u32 db_sq_offset;
u32 db_rq_offset;
u32 db_shift;
@ -126,8 +124,7 @@ struct ocrdma_create_srq_uresp {
u32 db_rq_offset;
u32 db_shift;
u32 free_rqe_delta;
u32 rsvd2;
u64 rsvd2;
u64 rsvd3;
} __packed;

9
drivers/infiniband/hw/ocrdma/ocrdma_hw.c
Просмотреть файл

@ -732,7 +732,7 @@ static void ocrdma_dispatch_ibevent(struct ocrdma_dev *dev,
break;
case OCRDMA_SRQ_LIMIT_EVENT:
ib_evt.element.srq = &qp->srq->ibsrq;
ib_evt.event = IB_EVENT_QP_LAST_WQE_REACHED;
ib_evt.event = IB_EVENT_SRQ_LIMIT_REACHED;
srq_event = 1;
qp_event = 0;
break;
@ -1990,19 +1990,12 @@ static void ocrdma_get_create_qp_rsp(struct ocrdma_create_qp_rsp *rsp,
max_wqe_allocated = 1 << max_wqe_allocated;
max_rqe_allocated = 1 << ((u16)rsp->max_wqe_rqe);
if (qp->dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
qp->sq.free_delta = 0;
qp->rq.free_delta = 1;
} else
qp->sq.free_delta = 1;
qp->sq.max_cnt = max_wqe_allocated;
qp->sq.max_wqe_idx = max_wqe_allocated - 1;
if (!attrs->srq) {
qp->rq.max_cnt = max_rqe_allocated;
qp->rq.max_wqe_idx = max_rqe_allocated - 1;
qp->rq.free_delta = 1;
}
}

1
drivers/infiniband/hw/ocrdma/ocrdma_main.c
Просмотреть файл

@ -26,7 +26,6 @@
*******************************************************************/
#include <linux/module.h>
#include <linux/version.h>
#include <linux/idr.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_user_verbs.h>

5
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
Просмотреть файл

@ -940,8 +940,6 @@ static int ocrdma_copy_qp_uresp(struct ocrdma_qp *qp,
uresp.db_rq_offset = OCRDMA_DB_RQ_OFFSET;
uresp.db_shift = 16;
}
uresp.free_wqe_delta = qp->sq.free_delta;
uresp.free_rqe_delta = qp->rq.free_delta;
if (qp->dpp_enabled) {
uresp.dpp_credit = dpp_credit_lmt;
@ -1307,8 +1305,6 @@ static int ocrdma_hwq_free_cnt(struct ocrdma_qp_hwq_info *q)
free_cnt = (q->max_cnt - q->head) + q->tail;
else
free_cnt = q->tail - q->head;
if (q->free_delta)
free_cnt -= q->free_delta;
return free_cnt;
}
@ -1501,7 +1497,6 @@ static int ocrdma_copy_srq_uresp(struct ocrdma_srq *srq, struct ib_udata *udata)
(srq->pd->id * srq->dev->nic_info.db_page_size);
uresp.db_page_size = srq->dev->nic_info.db_page_size;
uresp.num_rqe_allocated = srq->rq.max_cnt;
uresp.free_rqe_delta = 1;
if (srq->dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
uresp.db_rq_offset = OCRDMA_DB_GEN2_RQ1_OFFSET;
uresp.db_shift = 24;

1
drivers/infiniband/hw/ocrdma/ocrdma_verbs.h
Просмотреть файл

@ -28,7 +28,6 @@
#ifndef __OCRDMA_VERBS_H__
#define __OCRDMA_VERBS_H__
#include <linux/version.h>
int ocrdma_post_send(struct ib_qp *, struct ib_send_wr *,
struct ib_send_wr **bad_wr);
int ocrdma_post_recv(struct ib_qp *, struct ib_recv_wr *,

71
drivers/iommu/amd_iommu.c
Просмотреть файл

@ -547,26 +547,12 @@ static void iommu_poll_events(struct amd_iommu *iommu)
spin_unlock_irqrestore(&iommu->lock, flags);
}
static void iommu_handle_ppr_entry(struct amd_iommu *iommu, u32 head)
static void iommu_handle_ppr_entry(struct amd_iommu *iommu, u64 *raw)
{
struct amd_iommu_fault fault;
volatile u64 *raw;
int i;
INC_STATS_COUNTER(pri_requests);
raw = (u64 *)(iommu->ppr_log + head);
/*
* Hardware bug: Interrupt may arrive before the entry is written to
* memory. If this happens we need to wait for the entry to arrive.
*/
for (i = 0; i < LOOP_TIMEOUT; ++i) {
if (PPR_REQ_TYPE(raw[0]) != 0)
break;
udelay(1);
}
if (PPR_REQ_TYPE(raw[0]) != PPR_REQ_FAULT) {
pr_err_ratelimited("AMD-Vi: Unknown PPR request received\n");
return;
@ -578,12 +564,6 @@ static void iommu_handle_ppr_entry(struct amd_iommu *iommu, u32 head)
fault.tag = PPR_TAG(raw[0]);
fault.flags = PPR_FLAGS(raw[0]);
/*
* To detect the hardware bug we need to clear the entry
* to back to zero.
*/
raw[0] = raw[1] = 0;
atomic_notifier_call_chain(&ppr_notifier, 0, &fault);
}
@ -595,25 +575,62 @@ static void iommu_poll_ppr_log(struct amd_iommu *iommu)
if (iommu->ppr_log == NULL)
return;
/* enable ppr interrupts again */
writel(MMIO_STATUS_PPR_INT_MASK, iommu->mmio_base + MMIO_STATUS_OFFSET);
spin_lock_irqsave(&iommu->lock, flags);
head = readl(iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
tail = readl(iommu->mmio_base + MMIO_PPR_TAIL_OFFSET);
while (head != tail) {
volatile u64 *raw;
u64 entry[2];
int i;
/* Handle PPR entry */
iommu_handle_ppr_entry(iommu, head);
raw = (u64 *)(iommu->ppr_log + head);
/* Update and refresh ring-buffer state*/
/*
* Hardware bug: Interrupt may arrive before the entry is
* written to memory. If this happens we need to wait for the
* entry to arrive.
*/
for (i = 0; i < LOOP_TIMEOUT; ++i) {
if (PPR_REQ_TYPE(raw[0]) != 0)
break;
udelay(1);
}
/* Avoid memcpy function-call overhead */
entry[0] = raw[0];
entry[1] = raw[1];
/*
* To detect the hardware bug we need to clear the entry
* back to zero.
*/
raw[0] = raw[1] = 0UL;
/* Update head pointer of hardware ring-buffer */
head = (head + PPR_ENTRY_SIZE) % PPR_LOG_SIZE;
writel(head, iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
/*
* Release iommu->lock because ppr-handling might need to
* re-aquire it
*/
spin_unlock_irqrestore(&iommu->lock, flags);
/* Handle PPR entry */
iommu_handle_ppr_entry(iommu, entry);
spin_lock_irqsave(&iommu->lock, flags);
/* Refresh ring-buffer information */
head = readl(iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
tail = readl(iommu->mmio_base + MMIO_PPR_TAIL_OFFSET);
}
/* enable ppr interrupts again */
writel(MMIO_STATUS_PPR_INT_MASK, iommu->mmio_base + MMIO_STATUS_OFFSET);
spin_unlock_irqrestore(&iommu->lock, flags);
}

13
drivers/iommu/amd_iommu_init.c
Просмотреть файл

@ -1029,6 +1029,9 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
if (!iommu->dev)
return 1;
iommu->root_pdev = pci_get_bus_and_slot(iommu->dev->bus->number,
PCI_DEVFN(0, 0));
iommu->cap_ptr = h->cap_ptr;
iommu->pci_seg = h->pci_seg;
iommu->mmio_phys = h->mmio_phys;
@ -1323,20 +1326,16 @@ static void iommu_apply_resume_quirks(struct amd_iommu *iommu)
{
int i, j;
u32 ioc_feature_control;
struct pci_dev *pdev = NULL;
struct pci_dev *pdev = iommu->root_pdev;
/* RD890 BIOSes may not have completely reconfigured the iommu */
if (!is_rd890_iommu(iommu->dev))
if (!is_rd890_iommu(iommu->dev) || !pdev)
return;
/*
* First, we need to ensure that the iommu is enabled. This is
* controlled by a register in the northbridge
*/
pdev = pci_get_bus_and_slot(iommu->dev->bus->number, PCI_DEVFN(0, 0));
if (!pdev)
return;
/* Select Northbridge indirect register 0x75 and enable writing */
pci_write_config_dword(pdev, 0x60, 0x75 | (1 << 7));
@ -1346,8 +1345,6 @@ static void iommu_apply_resume_quirks(struct amd_iommu *iommu)
if (!(ioc_feature_control & 0x1))
pci_write_config_dword(pdev, 0x64, ioc_feature_control | 1);
pci_dev_put(pdev);
/* Restore the iommu BAR */
pci_write_config_dword(iommu->dev, iommu->cap_ptr + 4,
iommu->stored_addr_lo);

3
drivers/iommu/amd_iommu_types.h
Просмотреть файл

@ -481,6 +481,9 @@ struct amd_iommu {
/* Pointer to PCI device of this IOMMU */
struct pci_dev *dev;
/* Cache pdev to root device for resume quirks */
struct pci_dev *root_pdev;
/* physical address of MMIO space */
u64 mmio_phys;
/* virtual address of MMIO space */

4
drivers/md/raid1.c
Просмотреть файл

@ -2550,6 +2550,7 @@ static struct r1conf *setup_conf(struct mddev *mddev)
err = -EINVAL;
spin_lock_init(&conf->device_lock);
rdev_for_each(rdev, mddev) {
struct request_queue *q;
int disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
|| disk_idx < 0)
@ -2562,6 +2563,9 @@ static struct r1conf *setup_conf(struct mddev *mddev)
if (disk->rdev)
goto abort;
disk->rdev = rdev;
q = bdev_get_queue(rdev->bdev);
if (q->merge_bvec_fn)
mddev->merge_check_needed = 1;
disk->head_position = 0;
}

4
drivers/md/raid10.c
Просмотреть файл

@ -3475,6 +3475,7 @@ static int run(struct mddev *mddev)
rdev_for_each(rdev, mddev) {
long long diff;
struct request_queue *q;
disk_idx = rdev->raid_disk;
if (disk_idx < 0)
@ -3493,6 +3494,9 @@ static int run(struct mddev *mddev)
goto out_free_conf;
disk->rdev = rdev;
}
q = bdev_get_queue(rdev->bdev);
if (q->merge_bvec_fn)
mddev->merge_check_needed = 1;
diff = (rdev->new_data_offset - rdev->data_offset);
if (!mddev->reshape_backwards)
diff = -diff;

12
drivers/mtd/ubi/debug.c
Просмотреть файл

@ -264,6 +264,9 @@ static struct dentry *dfs_rootdir;
*/
int ubi_debugfs_init(void)
{
if (!IS_ENABLED(DEBUG_FS))
return 0;
dfs_rootdir = debugfs_create_dir("ubi", NULL);
if (IS_ERR_OR_NULL(dfs_rootdir)) {
int err = dfs_rootdir ? -ENODEV : PTR_ERR(dfs_rootdir);
@ -281,7 +284,8 @@ int ubi_debugfs_init(void)
*/
void ubi_debugfs_exit(void)
{
debugfs_remove(dfs_rootdir);
if (IS_ENABLED(DEBUG_FS))
debugfs_remove(dfs_rootdir);
}
/* Read an UBI debugfs file */
@ -403,6 +407,9 @@ int ubi_debugfs_init_dev(struct ubi_device *ubi)
struct dentry *dent;
struct ubi_debug_info *d = ubi->dbg;
if (!IS_ENABLED(DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
ubi->ubi_num);
if (n == UBI_DFS_DIR_LEN) {
@ -470,5 +477,6 @@ out:
*/
void ubi_debugfs_exit_dev(struct ubi_device *ubi)
{
debugfs_remove_recursive(ubi->dbg->dfs_dir);
if (IS_ENABLED(DEBUG_FS))
debugfs_remove_recursive(ubi->dbg->dfs_dir);
}

17
drivers/mtd/ubi/wl.c
Просмотреть файл

@ -1262,11 +1262,11 @@ int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum)
dbg_wl("flush pending work for LEB %d:%d (%d pending works)",
vol_id, lnum, ubi->works_count);
down_write(&ubi->work_sem);
while (found) {
struct ubi_work *wrk;
found = 0;
down_read(&ubi->work_sem);
spin_lock(&ubi->wl_lock);
list_for_each_entry(wrk, &ubi->works, list) {
if ((vol_id == UBI_ALL || wrk->vol_id == vol_id) &&
@ -1277,18 +1277,27 @@ int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum)
spin_unlock(&ubi->wl_lock);
err = wrk->func(ubi, wrk, 0);
if (err)
goto out;
if (err) {
up_read(&ubi->work_sem);
return err;
}
spin_lock(&ubi->wl_lock);
found = 1;
break;
}
}
spin_unlock(&ubi->wl_lock);
up_read(&ubi->work_sem);
}
out:
/*
* Make sure all the works which have been done in parallel are
* finished.
*/
down_write(&ubi->work_sem);
up_write(&ubi->work_sem);
return err;
}

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше