um: remove csum_partial_copy_generic_i386 to clean up exception table

arch/x86/um/checksum_32.S had been copy & paste from x86. When build
x86 uml, csum_partial_copy_generic_i386 mess up the exception table.
In fact, exception table dose not work in uml kernel.

And csum_partial_copy_generic_i386 never been called. So, delete it.

Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This commit is contained in:
Honggang Li 2014-06-05 12:15:24 +08:00 коммит произвёл Richard Weinberger
Родитель c798360cd1
Коммит 671312304e
1 изменённых файлов: 0 добавлений и 239 удалений

Просмотреть файл

@ -214,242 +214,3 @@ csum_partial:
ret
#endif
/*
unsigned int csum_partial_copy_generic (const char *src, char *dst,
int len, int sum, int *src_err_ptr, int *dst_err_ptr)
*/
/*
* Copy from ds while checksumming, otherwise like csum_partial
*
* The macros SRC and DST specify the type of access for the instruction.
* thus we can call a custom exception handler for all access types.
*
* FIXME: could someone double-check whether I haven't mixed up some SRC and
* DST definitions? It's damn hard to trigger all cases. I hope I got
* them all but there's no guarantee.
*/
#define SRC(y...) \
9999: y; \
_ASM_EXTABLE(9999b, 6001f)
#define DST(y...) \
9999: y; \
_ASM_EXTABLE(9999b, 6002f)
.align 4
#ifndef CONFIG_X86_USE_PPRO_CHECKSUM
#define ARGBASE 16
#define FP 12
csum_partial_copy_generic_i386:
subl $4,%esp
pushl %edi
pushl %esi
pushl %ebx
movl ARGBASE+16(%esp),%eax # sum
movl ARGBASE+12(%esp),%ecx # len
movl ARGBASE+4(%esp),%esi # src
movl ARGBASE+8(%esp),%edi # dst
testl $2, %edi # Check alignment.
jz 2f # Jump if alignment is ok.
subl $2, %ecx # Alignment uses up two bytes.
jae 1f # Jump if we had at least two bytes.
addl $2, %ecx # ecx was < 2. Deal with it.
jmp 4f
SRC(1: movw (%esi), %bx )
addl $2, %esi
DST( movw %bx, (%edi) )
addl $2, %edi
addw %bx, %ax
adcl $0, %eax
2:
movl %ecx, FP(%esp)
shrl $5, %ecx
jz 2f
testl %esi, %esi
SRC(1: movl (%esi), %ebx )
SRC( movl 4(%esi), %edx )
adcl %ebx, %eax
DST( movl %ebx, (%edi) )
adcl %edx, %eax
DST( movl %edx, 4(%edi) )
SRC( movl 8(%esi), %ebx )
SRC( movl 12(%esi), %edx )
adcl %ebx, %eax
DST( movl %ebx, 8(%edi) )
adcl %edx, %eax
DST( movl %edx, 12(%edi) )
SRC( movl 16(%esi), %ebx )
SRC( movl 20(%esi), %edx )
adcl %ebx, %eax
DST( movl %ebx, 16(%edi) )
adcl %edx, %eax
DST( movl %edx, 20(%edi) )
SRC( movl 24(%esi), %ebx )
SRC( movl 28(%esi), %edx )
adcl %ebx, %eax
DST( movl %ebx, 24(%edi) )
adcl %edx, %eax
DST( movl %edx, 28(%edi) )
lea 32(%esi), %esi
lea 32(%edi), %edi
dec %ecx
jne 1b
adcl $0, %eax
2: movl FP(%esp), %edx
movl %edx, %ecx
andl $0x1c, %edx
je 4f
shrl $2, %edx # This clears CF
SRC(3: movl (%esi), %ebx )
adcl %ebx, %eax
DST( movl %ebx, (%edi) )
lea 4(%esi), %esi
lea 4(%edi), %edi
dec %edx
jne 3b
adcl $0, %eax
4: andl $3, %ecx
jz 7f
cmpl $2, %ecx
jb 5f
SRC( movw (%esi), %cx )
leal 2(%esi), %esi
DST( movw %cx, (%edi) )
leal 2(%edi), %edi
je 6f
shll $16,%ecx
SRC(5: movb (%esi), %cl )
DST( movb %cl, (%edi) )
6: addl %ecx, %eax
adcl $0, %eax
7:
5000:
# Exception handler:
.section .fixup, "ax"
6001:
movl ARGBASE+20(%esp), %ebx # src_err_ptr
movl $-EFAULT, (%ebx)
# zero the complete destination - computing the rest
# is too much work
movl ARGBASE+8(%esp), %edi # dst
movl ARGBASE+12(%esp), %ecx # len
xorl %eax,%eax
rep ; stosb
jmp 5000b
6002:
movl ARGBASE+24(%esp), %ebx # dst_err_ptr
movl $-EFAULT,(%ebx)
jmp 5000b
.previous
popl %ebx
popl %esi
popl %edi
popl %ecx # equivalent to addl $4,%esp
ret
#else
/* Version for PentiumII/PPro */
#define ROUND1(x) \
SRC(movl x(%esi), %ebx ) ; \
addl %ebx, %eax ; \
DST(movl %ebx, x(%edi) ) ;
#define ROUND(x) \
SRC(movl x(%esi), %ebx ) ; \
adcl %ebx, %eax ; \
DST(movl %ebx, x(%edi) ) ;
#define ARGBASE 12
csum_partial_copy_generic_i386:
pushl %ebx
pushl %edi
pushl %esi
movl ARGBASE+4(%esp),%esi #src
movl ARGBASE+8(%esp),%edi #dst
movl ARGBASE+12(%esp),%ecx #len
movl ARGBASE+16(%esp),%eax #sum
# movl %ecx, %edx
movl %ecx, %ebx
movl %esi, %edx
shrl $6, %ecx
andl $0x3c, %ebx
negl %ebx
subl %ebx, %esi
subl %ebx, %edi
lea -1(%esi),%edx
andl $-32,%edx
lea 3f(%ebx,%ebx), %ebx
testl %esi, %esi
jmp *%ebx
1: addl $64,%esi
addl $64,%edi
SRC(movb -32(%edx),%bl) ; SRC(movb (%edx),%bl)
ROUND1(-64) ROUND(-60) ROUND(-56) ROUND(-52)
ROUND (-48) ROUND(-44) ROUND(-40) ROUND(-36)
ROUND (-32) ROUND(-28) ROUND(-24) ROUND(-20)
ROUND (-16) ROUND(-12) ROUND(-8) ROUND(-4)
3: adcl $0,%eax
addl $64, %edx
dec %ecx
jge 1b
4: movl ARGBASE+12(%esp),%edx #len
andl $3, %edx
jz 7f
cmpl $2, %edx
jb 5f
SRC( movw (%esi), %dx )
leal 2(%esi), %esi
DST( movw %dx, (%edi) )
leal 2(%edi), %edi
je 6f
shll $16,%edx
5:
SRC( movb (%esi), %dl )
DST( movb %dl, (%edi) )
6: addl %edx, %eax
adcl $0, %eax
7:
.section .fixup, "ax"
6001: movl ARGBASE+20(%esp), %ebx # src_err_ptr
movl $-EFAULT, (%ebx)
# zero the complete destination (computing the rest is too much work)
movl ARGBASE+8(%esp),%edi # dst
movl ARGBASE+12(%esp),%ecx # len
xorl %eax,%eax
rep; stosb
jmp 7b
6002: movl ARGBASE+24(%esp), %ebx # dst_err_ptr
movl $-EFAULT, (%ebx)
jmp 7b
.previous
popl %esi
popl %edi
popl %ebx
ret
#undef ROUND
#undef ROUND1
#endif