microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge ../powerpc-merge

This commit is contained in:
Paul Mackerras 2006-02-28 16:35:24 +11:00
Родитель 2cf82c0256 56ec6462af
Коммит 6749c55073
144 изменённых файлов: 1610 добавлений и 1001 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

6
Documentation/filesystems/ntfs.txt
Просмотреть файл

@ -457,6 +457,12 @@ ChangeLog
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
2.1.26:
- Implement support for sector sizes above 512 bytes (up to the maximum
supported by NTFS which is 4096 bytes).
- Enhance support for NTFS volumes which were supported by Windows but
not by Linux due to invalid attribute list attribute flags.
- A few minor updates and bug fixes.
2.1.25:
- Write support is now extended with write(2) being able to both
overwrite existing file data and to extend files. Also, if a write

9
Documentation/filesystems/tmpfs.txt
Просмотреть файл

@ -92,6 +92,15 @@ NodeList format is a comma-separated list of decimal numbers and ranges,
a range being two hyphen-separated decimal numbers, the smallest and
largest node numbers in the range. For example, mpol=bind:0-3,5,7,9-15
Note that trying to mount a tmpfs with an mpol option will fail if the
running kernel does not support NUMA; and will fail if its nodelist
specifies a node >= MAX_NUMNODES. If your system relies on that tmpfs
being mounted, but from time to time runs a kernel built without NUMA
capability (perhaps a safe recovery kernel), or configured to support
fewer nodes, then it is advisable to omit the mpol option from automatic
mount options. It can be added later, when the tmpfs is already mounted
on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
To specify the initial root directory you can use the following mount
options:

4
Documentation/x86_64/boot-options.txt
Просмотреть файл

@ -52,6 +52,10 @@ APICs
apicmaintimer. Useful when your PIT timer is totally
broken.
disable_8254_timer / enable_8254_timer
Enable interrupt 0 timer routing over the 8254 in addition to over
the IO-APIC. The kernel tries to set a sensible default.
Early Console
syntax: earlyprintk=vga

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
EXTRAVERSION =-rc4
EXTRAVERSION =-rc5
NAME=Sliding Snow Leopard
# *DOCUMENTATION*

14
arch/arm/mach-at91rm9200/gpio.c
Просмотреть файл

@ -274,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
gpio = &irq_desc[pin];
while (isr) {
if (isr & 1)
gpio->handle(pin, gpio, regs);
if (isr & 1) {
if (unlikely(gpio->disable_depth)) {
/*
* The core ARM interrupt handler lazily disables IRQs so
* another IRQ must be generated before it actually gets
* here to be disabled on the GPIO controller.
*/
gpio_irq_mask(pin);
}
else
gpio->handle(pin, gpio, regs);
}
pin++;
gpio++;
isr >>= 1;

3
arch/i386/Kconfig
Просмотреть файл

@ -733,7 +733,7 @@ config PHYSICAL_START
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

2
arch/i386/kernel/Makefile
Просмотреть файл

@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
quirks.o i8237.o
quirks.o i8237.o topology.o
obj-y += cpu/
obj-y += timers/

32
arch/i386/kernel/cpu/common.c
Просмотреть файл

@ -4,6 +4,7 @@
#include <linux/smp.h>
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/bootmem.h>
#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/i387.h>
@ -18,6 +19,9 @@
#include "cpu.h"
DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
@ -571,8 +575,9 @@ void __devinit cpu_init(void)
int cpu = smp_processor_id();
struct tss_struct * t = &per_cpu(init_tss, cpu);
struct thread_struct *thread = &current->thread;
struct desc_struct *gdt = get_cpu_gdt_table(cpu);
struct desc_struct *gdt;
__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
if (cpu_test_and_set(cpu, cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
@ -589,6 +594,25 @@ void __devinit cpu_init(void)
set_in_cr4(X86_CR4_TSD);
}
/*
* This is a horrible hack to allocate the GDT. The problem
* is that cpu_init() is called really early for the boot CPU
* (and hence needs bootmem) but much later for the secondary
* CPUs, when bootmem will have gone away
*/
if (NODE_DATA(0)->bdata->node_bootmem_map) {
gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
/* alloc_bootmem_pages panics on failure, so no check */
memset(gdt, 0, PAGE_SIZE);
} else {
gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
if (unlikely(!gdt)) {
printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
for (;;)
local_irq_enable();
}
}
/*
* Initialize the per-CPU GDT with the boot GDT,
* and set up the GDT descriptor:
@ -601,10 +625,10 @@ void __devinit cpu_init(void)
((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
(CPU_16BIT_STACK_SIZE - 1);
cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
cpu_gdt_descr[cpu].address = (unsigned long)gdt;
cpu_gdt_descr->size = GDT_SIZE - 1;
cpu_gdt_descr->address = (unsigned long)gdt;
load_gdt(&cpu_gdt_descr[cpu]);
load_gdt(cpu_gdt_descr);
load_idt(&idt_descr);
/*

12
arch/i386/kernel/efi.c
Просмотреть файл

@ -103,17 +103,19 @@ static void efi_call_phys_prelog(void)
*/
local_flush_tlb();
cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
per_cpu(cpu_gdt_descr, 0).address =
__pa(per_cpu(cpu_gdt_descr, 0).address);
load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
}
static void efi_call_phys_epilog(void)
{
unsigned long cr4;
cpu_gdt_descr[0].address =
(unsigned long) __va(cpu_gdt_descr[0].address);
load_gdt(&cpu_gdt_descr[0]);
per_cpu(cpu_gdt_descr, 0).address =
(unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
cr4 = read_cr4();
if (cr4 & X86_CR4_PSE) {

2
arch/i386/kernel/head.S
Просмотреть файл

@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table)
.quad 0x0000000000000000 /* 0xf0 - unused */
.quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */
/* Be sure this is zeroed to avoid false validations in Xen */
.fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0

2
arch/i386/kernel/i386_ksyms.c
Просмотреть файл

@ -3,8 +3,6 @@
#include <asm/checksum.h>
#include <asm/desc.h>
EXPORT_SYMBOL_GPL(cpu_gdt_descr);
EXPORT_SYMBOL(__down_failed);
EXPORT_SYMBOL(__down_failed_interruptible);
EXPORT_SYMBOL(__down_failed_trylock);

6
arch/i386/kernel/io_apic.c
Просмотреть файл

@ -2566,8 +2566,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
spin_unlock_irqrestore(&ioapic_lock, flags);
/* Sanity check */
if (reg_00.bits.ID != apic_id)
panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
if (reg_00.bits.ID != apic_id) {
printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
return -1;
}
}
apic_printk(APIC_VERBOSE, KERN_INFO

16
arch/i386/kernel/kprobes.c
Просмотреть файл

@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode)
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
/* insn: must be on special executable page on i386. */
p->ainsn.insn = get_insn_slot();
if (!p->ainsn.insn)
return -ENOMEM;
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
p->opcode = *p->addr;
return 0;
@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
(unsigned long) p->addr + sizeof(kprobe_opcode_t));
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
{
down(&kprobe_mutex);
free_insn_slot(p->ainsn.insn);
up(&kprobe_mutex);
}
static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
kcb->prev_kprobe.kp = kprobe_running();
@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
if (p->opcode == BREAKPOINT_INSTRUCTION)
regs->eip = (unsigned long)p->addr;
else
regs->eip = (unsigned long)&p->ainsn.insn;
regs->eip = (unsigned long)p->ainsn.insn;
}
/* Called with kretprobe_lock held */
@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p,
{
unsigned long *tos = (unsigned long *)&regs->esp;
unsigned long next_eip = 0;
unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
unsigned long copy_eip = (unsigned long)p->ainsn.insn;
unsigned long orig_eip = (unsigned long)p->addr;
switch (p->ainsn.insn[0]) {

10
arch/i386/kernel/mpparse.c
Просмотреть файл

@ -915,6 +915,7 @@ void __init mp_register_ioapic (
u32 gsi_base)
{
int idx = 0;
int tmpid;
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@ -935,9 +936,14 @@ void __init mp_register_ioapic (
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
tmpid = io_apic_get_unique_id(idx, id);
else
mp_ioapics[idx].mpc_apicid = id;
tmpid = id;
if (tmpid == -1) {
nr_ioapics--;
return;
}
mp_ioapics[idx].mpc_apicid = tmpid;
mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
/*

6
arch/i386/kernel/smpboot.c
Просмотреть файл

@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu)
unsigned long start_eip;
unsigned short nmi_high = 0, nmi_low = 0;
if (!cpu_gdt_descr[cpu].address &&
!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
printk("Failed to allocate GDT for CPU %d\n", cpu);
return 1;
}
++cpucount;
/*

6
arch/i386/mach-default/topology.c → arch/i386/kernel/topology.c
Просмотреть файл

@ -1,12 +1,12 @@
/*
* arch/i386/mach-generic/topology.c - Populate driverfs with topology information
* arch/i386/kernel/topology.c - Populate driverfs with topology information
*
* Written by: Matthew Dobson, IBM Corporation
* Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -34,7 +34,7 @@ static struct i386_cpu cpu_devices[NR_CPUS];
int arch_register_cpu(int num){
struct node *parent = NULL;
#ifdef CONFIG_NUMA
int node = cpu_to_node(num);
if (node_online(node))

2
arch/i386/mach-default/Makefile
Просмотреть файл

@ -2,4 +2,4 @@
# Makefile for the linux kernel.
#
obj-y := setup.o topology.o
obj-y := setup.o

3
arch/i386/mach-voyager/voyager_basic.c
Просмотреть файл

@ -23,6 +23,8 @@
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/sysrq.h>
#include <linux/smp.h>
#include <linux/nodemask.h>
#include <asm/io.h>
#include <asm/voyager.h>
#include <asm/vic.h>
@ -328,4 +330,3 @@ void machine_power_off(void)
if (pm_power_off)
pm_power_off();
}

1
arch/i386/mach-voyager/voyager_smp.c
Просмотреть файл

@ -402,6 +402,7 @@ find_smp_config(void)
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
cpu_possible_map = phys_cpu_present_map;
printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
/* Here we set up the VIC to enable SMP */
/* enable the CPIs by writing the base vector to their register */

1
arch/ia64/Kconfig
Просмотреть файл

@ -453,6 +453,7 @@ source "arch/ia64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

6
arch/m32r/Makefile
Просмотреть файл

@ -12,14 +12,14 @@ CFLAGS_MODULE += -mmodel=large
ifdef CONFIG_CHIP_VDEC2
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel
else
cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2
aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -O2
endif
cflags-$(CONFIG_ISA_M32R) += -DNO_FPU
aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -Wa,-no-bitinst
aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -O2 -Wa,-no-bitinst
CFLAGS += $(cflags-y)
AFLAGS += $(aflags-y)

24
arch/m32r/kernel/signal.c
Просмотреть файл

@ -36,7 +36,7 @@ int do_signal(struct pt_regs *, sigset_t *);
asmlinkage int
sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
unsigned long r2, unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, struct pt_regs regs)
unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
sigset_t saveset, newset;
@ -54,21 +54,21 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs.r0 = -EINTR;
regs->r0 = -EINTR;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
if (do_signal(&regs, &saveset))
return regs.r0;
if (do_signal(regs, &saveset))
return regs->r0;
}
}
asmlinkage int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
unsigned long r2, unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, struct pt_regs regs)
unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
return do_sigaltstack(uss, uoss, regs.spu);
return do_sigaltstack(uss, uoss, regs->spu);
}
@ -140,11 +140,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
asmlinkage int
sys_rt_sigreturn(unsigned long r0, unsigned long r1,
unsigned long r2, unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, struct pt_regs regs)
unsigned long r5, unsigned long r6, struct pt_regs *regs)
{
struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu;
struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->spu;
sigset_t set;
stack_t st;
int result;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@ -158,14 +157,11 @@ sys_rt_sigreturn(unsigned long r0, unsigned long r1,
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(&regs, &frame->uc.uc_mcontext, &result))
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result))
goto badframe;
if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->spu) == -EFAULT)
goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
do_sigaltstack(&st, NULL, regs.spu);
return result;

4
arch/m32r/lib/usercopy.c
Просмотреть файл

@ -64,7 +64,7 @@ do { \
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
: "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \
@ -101,7 +101,7 @@ do { \
" .balign 4\n" \
" .long 0b,3b\n" \
".previous" \
: "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \
: "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \
"=&r" (__d2) \
: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \
"4"(dst) \

54
arch/mips/kernel/linux32.c
Просмотреть файл

@ -161,60 +161,6 @@ out:
return error;
}
struct dirent32 {
unsigned int d_ino;
unsigned int d_off;
unsigned short d_reclen;
char d_name[NAME_MAX + 1];
};
static void
xlate_dirent(void *dirent64, void *dirent32, long n)
{
long off;
struct dirent *dirp;
struct dirent32 *dirp32;
off = 0;
while (off < n) {
dirp = (struct dirent *)(dirent64 + off);
dirp32 = (struct dirent32 *)(dirent32 + off);
off += dirp->d_reclen;
dirp32->d_ino = dirp->d_ino;
dirp32->d_off = (unsigned int)dirp->d_off;
dirp32->d_reclen = dirp->d_reclen;
strncpy(dirp32->d_name, dirp->d_name, dirp->d_reclen - ((3 * 4) + 2));
}
return;
}
asmlinkage long
sys32_getdents(unsigned int fd, void * dirent32, unsigned int count)
{
long n;
void *dirent64;
dirent64 = (void *)((unsigned long)(dirent32 + (sizeof(long) - 1)) & ~(sizeof(long) - 1));
if ((n = sys_getdents(fd, dirent64, count - (dirent64 - dirent32))) < 0)
return(n);
xlate_dirent(dirent64, dirent32, n);
return(n);
}
asmlinkage int old_readdir(unsigned int fd, void * dirent, unsigned int count);
asmlinkage int
sys32_readdir(unsigned int fd, void * dirent32, unsigned int count)
{
int n;
struct dirent dirent64;
if ((n = old_readdir(fd, &dirent64, count)) < 0)
return(n);
xlate_dirent(&dirent64, dirent32, dirent64.d_reclen);
return(n);
}
asmlinkage int
sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
{

2
arch/mips/kernel/scall32-o32.S
Просмотреть файл

@ -626,7 +626,7 @@ einval: li v0, -EINVAL
sys sys_fstatat64 4
sys sys_unlinkat 3
sys sys_renameat 4 /* 4295 */
sys sys_linkat 4
sys sys_linkat 5
sys sys_symlinkat 3
sys sys_readlinkat 4
sys sys_fchmodat 3

2
arch/mips/kernel/scall64-n32.S
Просмотреть файл

@ -195,7 +195,7 @@ EXPORT(sysn32_call_table)
PTR sys_fdatasync
PTR sys_truncate
PTR sys_ftruncate /* 6075 */
PTR sys32_getdents
PTR compat_sys_getdents
PTR sys_getcwd
PTR sys_chdir
PTR sys_fchdir

4
arch/mips/kernel/scall64-o32.S
Просмотреть файл

@ -293,7 +293,7 @@ sys_call_table:
PTR sys_uselib
PTR sys_swapon
PTR sys_reboot
PTR sys32_readdir
PTR compat_sys_old_readdir
PTR old_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
@ -345,7 +345,7 @@ sys_call_table:
PTR sys_setfsuid
PTR sys_setfsgid
PTR sys32_llseek /* 4140 */
PTR sys32_getdents
PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
PTR sys_msync

3
arch/mips/kernel/setup.c
Просмотреть файл

@ -540,6 +540,9 @@ void __init setup_arch(char **cmdline_p)
sparse_init();
paging_init();
resource_init();
#ifdef CONFIG_SMP
plat_smp_setup();
#endif
}
int __init fpu_disable(char *s)

2
arch/mips/kernel/smp.c
Просмотреть файл

@ -236,7 +236,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
smp_tune_scheduling();
prom_prepare_cpus(max_cpus);
plat_prepare_cpus(max_cpus);
}
/* preload SMP state for boot cpu */

13
arch/mips/kernel/smp_mt.c
Просмотреть файл

@ -143,7 +143,7 @@ static struct irqaction irq_call = {
* Make sure all CPU's are in a sensible state before we boot any of the
* secondarys
*/
void prom_prepare_cpus(unsigned int max_cpus)
void plat_smp_setup(void)
{
unsigned long val;
int i, num;
@ -179,11 +179,9 @@ void prom_prepare_cpus(unsigned int max_cpus)
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
if (i < max_cpus) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
/* disable multi-threading with TC's */
@ -241,7 +239,10 @@ void prom_prepare_cpus(unsigned int max_cpus)
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
}
void __init plat_prepare_cpus(unsigned int max_cpus)
{
cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;

24
arch/mips/pmc-sierra/yosemite/smp.c
Просмотреть файл

@ -50,37 +50,25 @@ void __init prom_grab_secondary(void)
* We don't want to start the secondary CPU yet nor do we have a nice probing
* feature in PMON so we just assume presence of the secondary core.
*/
static char maxcpus_string[] __initdata =
KERN_WARNING "max_cpus set to 0; using 1 instead\n";
void __init prom_prepare_cpus(unsigned int max_cpus)
void __init plat_smp_setup(void)
{
int enabled = 0, i;
if (max_cpus == 0) {
printk(maxcpus_string);
max_cpus = 1;
}
int i;
cpus_clear(phys_cpu_present_map);
for (i = 0; i < 2; i++) {
if (i == max_cpus)
break;
/*
* The boot CPU
*/
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = i;
__cpu_logical_map[i] = i;
enabled++;
}
}
void __init plat_prepare_cpus(unsigned int max_cpus)
{
/*
* Be paranoid. Enable the IPI only if we're really about to go SMP.
*/
if (enabled > 1)
if (cpus_weight(cpu_possible_map))
set_c0_status(STATUSF_IP5);
}

7
arch/mips/sgi-ip27/ip27-smp.c
Просмотреть файл

@ -140,7 +140,7 @@ static __init void intr_clear_all(nasid_t nasid)
REMOTE_HUB_CLR_INTR(nasid, i);
}
void __init prom_prepare_cpus(unsigned int max_cpus)
void __init plat_smp_setup(void)
{
cnodeid_t cnode;
@ -161,6 +161,11 @@ void __init prom_prepare_cpus(unsigned int max_cpus)
alloc_cpupda(0, 0);
}
void __init plat_prepare_cpus(unsigned int max_cpus)
{
/* We already did everything necessary earlier */
}
/*
* Launch a slave into smp_bootstrap(). It doesn't take an argument, and we
* set sp to the kernel stack of the newly created idle process, gp to the proc

10
arch/mips/sibyte/cfe/smp.c
Просмотреть файл

@ -31,7 +31,7 @@
*
* Common setup before any secondaries are started
*/
void __init prom_prepare_cpus(unsigned int max_cpus)
void __init plat_smp_setup(void)
{
int i, num;
@ -40,14 +40,18 @@ void __init prom_prepare_cpus(unsigned int max_cpus)
__cpu_number_map[0] = 0;
__cpu_logical_map[0] = 0;
for (i=1, num=0; i<NR_CPUS; i++) {
for (i = 1, num = 0; i < NR_CPUS; i++) {
if (cfe_cpu_stop(i) == 0) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
}
printk("Detected %i available secondary CPU(s)\n", num);
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
}
void __init plat_prepare_cpus(unsigned int max_cpus)
{
}
/*

2
arch/powerpc/Kconfig
Просмотреть файл

@ -989,7 +989,7 @@ source "arch/powerpc/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on PPC64
depends on PPC64 && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

54
arch/powerpc/kernel/prom.c
Просмотреть файл

@ -816,8 +816,6 @@ void __init unflatten_device_tree(void)
{
unsigned long start, mem, size;
struct device_node **allnextp = &allnodes;
char *p = NULL;
int l = 0;
DBG(" -> unflatten_device_tree()\n");
@ -853,19 +851,6 @@ void __init unflatten_device_tree(void)
if (of_chosen == NULL)
of_chosen = of_find_node_by_path("/chosen@0");
/* Retreive command line */
if (of_chosen != NULL) {
p = (char *)get_property(of_chosen, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE));
}
#ifdef CONFIG_CMDLINE
if (l == 0 || (l == 1 && (*p) == 0))
strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
DBG("Command line is: %s\n", cmd_line);
DBG(" <- unflatten_device_tree()\n");
}
@ -936,6 +921,8 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
{
u32 *prop;
unsigned long *lprop;
unsigned long l;
char *p;
DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
@ -1000,6 +987,41 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
crashk_res.end = crashk_res.start + *lprop - 1;
#endif
/* Retreive command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
#ifdef CONFIG_CMDLINE
if (l == 0 || (l == 1 && (*p) == 0))
strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
DBG("Command line is: %s\n", cmd_line);
if (strstr(cmd_line, "mem=")) {
char *p, *q;
unsigned long maxmem = 0;
for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
q = p + 4;
if (p > cmd_line && p[-1] != ' ')
continue;
maxmem = simple_strtoul(q, &q, 0);
if (*q == 'k' || *q == 'K') {
maxmem <<= 10;
++q;
} else if (*q == 'm' || *q == 'M') {
maxmem <<= 20;
++q;
} else if (*q == 'g' || *q == 'G') {
maxmem <<= 30;
++q;
}
}
memory_limit = maxmem;
}
/* break now */
return 1;
}
@ -1120,7 +1142,7 @@ static void __init early_reserve_mem(void)
size_32 = *(reserve_map_32++);
if (size_32 == 0)
break;
DBG("reserving: %lx -> %lx\n", base_32, size_32);
DBG("reserving: %x -> %x\n", base_32, size_32);
lmb_reserve(base_32, size_32);
}
return;

4
arch/powerpc/kernel/vdso64/gettimeofday.S
Просмотреть файл

@ -225,9 +225,9 @@ V_FUNCTION_BEGIN(__do_get_xsec)
.cfi_startproc
/* check for update count & load values */
1: ld r8,CFG_TB_UPDATE_COUNT(r3)
andi. r0,r4,1 /* pending update ? loop */
andi. r0,r8,1 /* pending update ? loop */
bne- 1b
xor r0,r4,r4 /* create dependency */
xor r0,r8,r8 /* create dependency */
add r3,r3,r0
/* Get TB & offset it */

2
arch/powerpc/mm/hash_utils_64.c
Просмотреть файл

@ -169,7 +169,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
#ifdef CONFIG_PPC_ISERIES
if (_machine == PLATFORM_ISERIES_LPAR)
ret = iSeries_hpte_insert(hpteg, va,
virt_to_abs(paddr),
__pa(vaddr),
tmp_mode,
HPTE_V_BOLTED,
psize);

14
arch/powerpc/platforms/pseries/eeh.c
Просмотреть файл

@ -893,6 +893,20 @@ void eeh_add_device_tree_early(struct device_node *dn)
}
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
void eeh_add_device_tree_late(struct pci_bus *bus)
{
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
eeh_add_device_late(dev);
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
struct pci_bus *subbus = dev->subordinate;
if (subbus)
eeh_add_device_tree_late(subbus);
}
}
}
/**
* eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH

2
arch/powerpc/platforms/pseries/eeh_driver.c
Просмотреть файл

@ -37,7 +37,7 @@
static inline const char * pcid_name (struct pci_dev *pdev)
{
if (pdev->dev.driver)
if (pdev && pdev->dev.driver)
return pdev->dev.driver->name;
return "";
}

36
arch/powerpc/platforms/pseries/pci_dlpar.c
Просмотреть файл

@ -106,6 +106,8 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
}
}
}
eeh_add_device_tree_late(bus);
}
EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
@ -114,7 +116,6 @@ pcibios_pci_config_bridge(struct pci_dev *dev)
{
u8 sec_busno;
struct pci_bus *child_bus;
struct pci_dev *child_dev;
/* Get busno of downstream bus */
pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
@ -129,10 +130,6 @@ pcibios_pci_config_bridge(struct pci_dev *dev)
pci_scan_child_bus(child_bus);
list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
eeh_add_device_late(child_dev);
}
/* Fixup new pci devices without touching bus struct */
pcibios_fixup_new_pci_devices(child_bus, 0);
@ -160,18 +157,25 @@ pcibios_add_pci_devices(struct pci_bus * bus)
eeh_add_device_tree_early(dn);
/* pci_scan_slot should find all children */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
if (num) {
pcibios_fixup_new_pci_devices(bus, 1);
pci_bus_add_devices(bus);
}
if (_machine == PLATFORM_PSERIES_LPAR) {
/* use ofdt-based probe */
of_scan_bus(dn, bus);
if (!list_empty(&bus->devices)) {
pcibios_fixup_new_pci_devices(bus, 0);
pci_bus_add_devices(bus);
}
} else {
/* use legacy probe */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
if (num) {
pcibios_fixup_new_pci_devices(bus, 1);
pci_bus_add_devices(bus);
}
list_for_each_entry(dev, &bus->devices, bus_list) {
eeh_add_device_late (dev);
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
pcibios_pci_config_bridge(dev);
list_for_each_entry(dev, &bus->devices, bus_list)
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
pcibios_pci_config_bridge(dev);
}
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);

1
arch/s390/kernel/compat_wrapper.S
Просмотреть файл

@ -1552,6 +1552,7 @@ sys_linkat_wrapper:
llgtr %r3,%r3 # const char *
lgfr %r4,%r4 # int
llgtr %r5,%r5 # const char *
lgfr %r6,%r6 # int
jg sys_linkat
.globl sys_symlinkat_wrapper

1
arch/sparc64/Kconfig
Просмотреть файл

@ -383,6 +383,7 @@ source "arch/sparc64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

2
arch/sparc64/kernel/setup.c
Просмотреть файл

@ -542,6 +542,8 @@ void __init setup_arch(char **cmdline_p)
}
#endif
smp_setup_cpu_possible_map();
paging_init();
}

28
arch/sparc64/kernel/smp.c
Просмотреть файл

@ -1079,18 +1079,12 @@ int setup_profiling_timer(unsigned int multiplier)
return 0;
}
/* Constrain the number of cpus to max_cpus. */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
int instance, mid;
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid < max_cpus)
cpu_set(mid, phys_cpu_present_map);
instance++;
}
if (num_possible_cpus() > max_cpus) {
int instance, mid;
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid != boot_cpu_id) {
@ -1105,6 +1099,22 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
smp_store_cpu_info(boot_cpu_id);
}
/* Set this up early so that things like the scheduler can init
* properly. We use the same cpu mask for both the present and
* possible cpu map.
*/
void __init smp_setup_cpu_possible_map(void)
{
int instance, mid;
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid < NR_CPUS)
cpu_set(mid, phys_cpu_present_map);
instance++;
}
}
void __devinit smp_prepare_boot_cpu(void)
{
if (hard_smp_processor_id() >= NR_CPUS) {

2
arch/um/drivers/cow.h
Просмотреть файл

@ -46,7 +46,7 @@ extern int file_reader(__u64 offset, char *buf, int len, void *arg);
extern int read_cow_header(int (*reader)(__u64, char *, int, void *),
void *arg, __u32 *version_out,
char **backing_file_out, time_t *mtime_out,
unsigned long long *size_out, int *sectorsize_out,
__u64 *size_out, int *sectorsize_out,
__u32 *align_out, int *bitmap_offset_out);
extern int write_cow_header(char *cow_file, int fd, char *backing_file,

6
arch/um/drivers/cow_sys.h
Просмотреть файл

@ -23,17 +23,17 @@ static inline char *cow_strdup(char *str)
return(uml_strdup(str));
}
static inline int cow_seek_file(int fd, unsigned long long offset)
static inline int cow_seek_file(int fd, __u64 offset)
{
return(os_seek_file(fd, offset));
}
static inline int cow_file_size(char *file, unsigned long long *size_out)
static inline int cow_file_size(char *file, __u64 *size_out)
{
return(os_file_size(file, size_out));
}
static inline int cow_write_file(int fd, char *buf, int size)
static inline int cow_write_file(int fd, void *buf, int size)
{
return(os_write_file(fd, buf, size));
}

24
arch/um/drivers/cow_user.c
Просмотреть файл

@ -176,7 +176,7 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
err = -ENOMEM;
header = cow_malloc(sizeof(*header));
if(header == NULL){
cow_printf("Failed to allocate COW V3 header\n");
cow_printf("write_cow_header - failed to allocate COW V3 header\n");
goto out;
}
header->magic = htonl(COW_MAGIC);
@ -196,15 +196,17 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
err = os_file_modtime(header->backing_file, &modtime);
if(err < 0){
cow_printf("Backing file '%s' mtime request failed, "
"err = %d\n", header->backing_file, -err);
cow_printf("write_cow_header - backing file '%s' mtime "
"request failed, err = %d\n", header->backing_file,
-err);
goto out_free;
}
err = cow_file_size(header->backing_file, size);
if(err < 0){
cow_printf("Couldn't get size of backing file '%s', "
"err = %d\n", header->backing_file, -err);
cow_printf("write_cow_header - couldn't get size of "
"backing file '%s', err = %d\n",
header->backing_file, -err);
goto out_free;
}
@ -214,10 +216,11 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
header->alignment = htonl(alignment);
header->cow_format = COW_BITMAP;
err = os_write_file(fd, header, sizeof(*header));
err = cow_write_file(fd, header, sizeof(*header));
if(err != sizeof(*header)){
cow_printf("Write of header to new COW file '%s' failed, "
"err = %d\n", cow_file, -err);
cow_printf("write_cow_header - write of header to "
"new COW file '%s' failed, err = %d\n", cow_file,
-err);
goto out_free;
}
err = 0;
@ -299,7 +302,7 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
}
else if(version == 3){
if(n < sizeof(header->v3)){
cow_printf("read_cow_header - failed to read V2 "
cow_printf("read_cow_header - failed to read V3 "
"header\n");
goto out;
}
@ -359,7 +362,8 @@ int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize,
if(err != sizeof(zero)){
cow_printf("Write of bitmap to new COW file '%s' failed, "
"err = %d\n", cow_file, -err);
err = -EINVAL;
if (err >= 0)
err = -EINVAL;
goto out;
}

34
arch/um/drivers/net_user.c
Просмотреть файл

@ -47,10 +47,12 @@ void tap_check_ips(char *gate_addr, unsigned char *eth_addr)
}
}
/* Do reliable error handling as this fails frequently enough. */
void read_output(int fd, char *output, int len)
{
int remain, n, actual;
int remain, ret, expected;
char c;
char *str;
if(output == NULL){
output = &c;
@ -58,23 +60,31 @@ void read_output(int fd, char *output, int len)
}
*output = '\0';
n = os_read_file(fd, &remain, sizeof(remain));
if(n != sizeof(remain)){
printk("read_output - read of length failed, err = %d\n", -n);
return;
ret = os_read_file(fd, &remain, sizeof(remain));
if (ret != sizeof(remain)) {
expected = sizeof(remain);
str = "length";
goto err;
}
while(remain != 0){
n = (remain < len) ? remain : len;
actual = os_read_file(fd, output, n);
if(actual != n){
printk("read_output - read of data failed, "
"err = %d\n", -actual);
return;
expected = (remain < len) ? remain : len;
ret = os_read_file(fd, output, expected);
if (ret != expected) {
str = "data";
goto err;
}
remain -= actual;
remain -= ret;
}
return;
err:
if (ret < 0)
printk("read_output - read of %s failed, errno = %d\n", str, -ret);
else
printk("read_output - read of %s failed, read only %d of %d bytes\n", str, ret, expected);
}
int net_read(int fd, void *buf, int len)

2
arch/um/drivers/ubd_kern.c
Просмотреть файл

@ -1135,7 +1135,7 @@ static int path_requires_switch(char *from_cmdline, char *from_cow, char *cow)
static int backing_file_mismatch(char *file, __u64 size, time_t mtime)
{
unsigned long modtime;
long long actual;
unsigned long long actual;
int err;
err = os_file_modtime(file, &modtime);

2
arch/um/include/init.h
Просмотреть файл

@ -122,7 +122,7 @@ extern struct uml_param __uml_setup_start, __uml_setup_end;
#define __exitcall(fn) static exitcall_t __exitcall_##fn __exit_call = fn
#define __init_call __attribute__ ((unused,__section__ (".initcall.init")))
#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init")))
#endif

3
arch/um/include/os.h
Просмотреть файл

@ -179,8 +179,11 @@ extern void os_stop_process(int pid);
extern void os_kill_process(int pid, int reap_child);
extern void os_kill_ptraced_process(int pid, int reap_child);
extern void os_usr1_process(int pid);
extern long os_ptrace_ldt(long pid, long addr, long data);
extern int os_getpid(void);
extern int os_getpgrp(void);
extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
extern void init_new_thread_signals(int altstack);
extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr);

19
arch/um/os-Linux/file.c
Просмотреть файл

@ -272,14 +272,23 @@ int os_connect_socket(char *name)
snprintf(sock.sun_path, sizeof(sock.sun_path), "%s", name);
fd = socket(AF_UNIX, SOCK_STREAM, 0);
if(fd < 0)
return(fd);
if(fd < 0) {
err = -errno;
goto out;
}
err = connect(fd, (struct sockaddr *) &sock, sizeof(sock));
if(err)
return(-errno);
if(err) {
err = -errno;
goto out_close;
}
return(fd);
return fd;
out_close:
close(fd);
out:
return err;
}
void os_close_file(int fd)

16
arch/um/os-Linux/process.c
Просмотреть файл

@ -19,6 +19,7 @@
#include "irq_user.h"
#include "kern_util.h"
#include "longjmp.h"
#include "skas_ptrace.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@ -100,6 +101,21 @@ void os_kill_process(int pid, int reap_child)
}
/* This is here uniquely to have access to the userspace errno, i.e. the one
* used by ptrace in case of error.
*/
long os_ptrace_ldt(long pid, long addr, long data)
{
int ret;
ret = ptrace(PTRACE_LDT, pid, addr, data);
if (ret < 0)
return -errno;
return ret;
}
/* Kill off a ptraced child by all means available. kill it normally first,
* then PTRACE_KILL it, then PTRACE_CONT it in case it's in a run state from
* which it can't exit directly.

9
arch/um/sys-i386/ldt.c
Просмотреть файл

@ -107,7 +107,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
* So we need to switch child's mm into our userspace, then
* later switch back.
*
* Note: I'm unshure: should interrupts be disabled here?
* Note: I'm unsure: should interrupts be disabled here?
*/
if(!current->active_mm || current->active_mm == &init_mm ||
mm_idp != &current->active_mm->context.skas.id)
@ -129,9 +129,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
pid = userspace_pid[cpu];
}
res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op);
if(res)
res = errno;
res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op);
if(proc_mm)
put_cpu();
@ -181,8 +179,7 @@ static long read_ldt_from_host(void __user * ptr, unsigned long bytecount)
*/
cpu = get_cpu();
res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0,
(unsigned long) &ptrace_ldt);
res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt);
put_cpu();
if(res < 0)
goto out;

16
arch/x86_64/Kconfig
Просмотреть файл

@ -354,21 +354,6 @@ config HPET_TIMER
as it is off-chip. You can find the HPET spec at
<http://www.intel.com/hardwaredesign/hpetspec.htm>.
config X86_PM_TIMER
bool "PM timer" if EMBEDDED
depends on ACPI
default y
help
Support the ACPI PM timer for time keeping. This is slow,
but is useful on some chipsets without HPET on systems with more
than one CPU. On a single processor or single socket multi core
system it is normally not required.
When the PM timer is active 64bit vsyscalls are disabled
and should not be enabled (/proc/sys/kernel/vsyscall64 should
not be changed).
The kernel selects the PM timer only as a last resort, so it is
useful to enable just in case.
config HPET_EMULATE_RTC
bool "Provide RTC interrupt"
depends on HPET_TIMER && RTC=y
@ -592,6 +577,7 @@ source "arch/x86_64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes

2
arch/x86_64/kernel/Makefile
Просмотреть файл

@ -43,7 +43,7 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0
bootflag-y += ../../i386/kernel/bootflag.o
cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
topology-y += ../../i386/mach-default/topology.o
topology-y += ../../i386/kernel/topology.o
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o
quirks-y += ../../i386/kernel/quirks.o

2
arch/x86_64/kernel/aperture.c
Просмотреть файл

@ -248,7 +248,7 @@ void __init iommu_hole_init(void)
/* Got the aperture from the AGP bridge */
} else if (swiotlb && !valid_agp) {
/* Do nothing */
} else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) ||
} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
force_iommu ||
valid_agp ||
fallback_aper_force) {

48
arch/x86_64/kernel/io_apic.c
Просмотреть файл

@ -50,6 +50,8 @@ static int no_timer_check;
int disable_timer_pin_1 __initdata;
int timer_over_8254 __initdata = 1;
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
@ -251,6 +253,20 @@ static int __init enable_ioapic_setup(char *str)
__setup("noapic", disable_ioapic_setup);
__setup("apic", enable_ioapic_setup);
static int __init setup_disable_8254_timer(char *s)
{
timer_over_8254 = -1;
return 1;
}
static int __init setup_enable_8254_timer(char *s)
{
timer_over_8254 = 2;
return 1;
}
__setup("disable_8254_timer", setup_disable_8254_timer);
__setup("enable_8254_timer", setup_enable_8254_timer);
#include <asm/pci-direct.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
@ -309,27 +325,20 @@ void __init check_ioapic(void)
#endif
/* RED-PEN skip them on mptables too? */
return;
/* This should be actually default, but
for 2.6.16 let's do it for ATI only where
it's really needed. */
case PCI_VENDOR_ID_ATI:
if (apic_runs_main_timer != 0)
break;
#ifdef CONFIG_ACPI
/* Don't do this for laptops right
right now because their timer
doesn't necessarily tick in C2/3 */
if (acpi_fadt.revision >= 3 &&
(acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) {
printk(KERN_INFO
"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n");
break;
}
#endif
if (timer_over_8254 == 1) {
timer_over_8254 = 0;
printk(KERN_INFO
"ATI board detected. Using APIC/PM timer.\n");
apic_runs_main_timer = 1;
nohpet = 1;
"ATI board detected. Disabling timer routing over 8254.\n");
}
return;
}
/* No multi-function device? */
type = read_pci_config_byte(num,slot,func,
PCI_HEADER_TYPE);
@ -1773,6 +1782,8 @@ static inline void unlock_ExtINT_logic(void)
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
*
* FIXME: really need to revamp this for modern platforms only.
*/
static inline void check_timer(void)
{
@ -1795,7 +1806,8 @@ static inline void check_timer(void)
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
enable_8259A_irq(0);
if (timer_over_8254 > 0)
enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
@ -1850,7 +1862,7 @@ static inline void check_timer(void)
}
printk(" failed.\n");
if (nmi_watchdog) {
if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = 0;
}

22
arch/x86_64/kernel/pci-gart.c
Просмотреть файл

@ -228,11 +228,6 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size
int mmu = high;
if (force_iommu)
mmu = 1;
if (no_iommu) {
if (high)
panic("PCI-DMA: high address but no IOMMU.\n");
mmu = 0;
}
return mmu;
}
@ -241,11 +236,6 @@ static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t
u64 mask = *dev->dma_mask;
int high = addr + size >= mask;
int mmu = high;
if (no_iommu) {
if (high)
panic("PCI-DMA: high address but no IOMMU.\n");
mmu = 0;
}
return mmu;
}
@ -310,7 +300,7 @@ void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int di
for (i = 0; i < nents; i++) {
struct scatterlist *s = &sg[i];
if (!s->dma_length)
if (!s->dma_length || !s->length)
break;
dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
}
@ -364,6 +354,7 @@ static int __dma_map_cont(struct scatterlist *sg, int start, int stopat,
BUG_ON(i > start && s->offset);
if (i == start) {
*sout = *s;
sout->dma_address = iommu_bus_base;
sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
sout->dma_length = s->length;
@ -390,6 +381,7 @@ static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat,
{
if (!need) {
BUG_ON(stopat - start != 1);
*sout = sg[start];
sout->dma_length = sg[start].length;
return 0;
}
@ -632,17 +624,13 @@ static int __init pci_iommu_init(void)
(agp_copy_info(agp_bridge, &info) < 0);
#endif
if (swiotlb) {
no_iommu = 1;
if (swiotlb)
return -1;
}
if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
!iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
no_iommu = 1;
no_iommu_init();
printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "

6
arch/x86_64/kernel/setup.c
Просмотреть файл

@ -423,6 +423,12 @@ static __init void parse_cmdline_early (char ** cmdline_p)
else if(!memcmp(from, "elfcorehdr=", 11))
elfcorehdr_addr = memparse(from+11, &from);
#endif
#ifdef CONFIG_HOTPLUG_CPU
else if (!memcmp(from, "additional_cpus=", 16))
setup_additional_cpus(from+16);
#endif
next_char:
c = *(from++);
if (!c)

4
arch/x86_64/kernel/smpboot.c
Просмотреть файл

@ -1152,8 +1152,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
setup_ioapic_dest();
#endif
time_init_gtod();
check_nmi_watchdog();
}
@ -1244,7 +1242,7 @@ void __cpu_die(unsigned int cpu)
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
static __init int setup_additional_cpus(char *s)
__init int setup_additional_cpus(char *s)
{
return get_option(&s, &additional_cpus);
}

22
arch/x86_64/kernel/time.c
Просмотреть файл

@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void);
extern void i8254_timer_resume(void);
extern int using_apic_timer;
static char *time_init_gtod(void);
DEFINE_SPINLOCK(rtc_lock);
DEFINE_SPINLOCK(i8253_lock);
@ -901,6 +903,7 @@ static struct irqaction irq0 = {
void __init time_init(void)
{
char *timename;
char *gtod;
#ifdef HPET_HACK_ENABLE_DANGEROUS
if (!vxtime.hpet_address) {
@ -945,21 +948,19 @@ void __init time_init(void)
timename = "PIT";
}
printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
vxtime.mode = VXTIME_TSC;
gtod = time_init_gtod();
printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
vxtime.mode = VXTIME_TSC;
vxtime.quot = (1000000L << 32) / vxtime_hz;
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
setup_irq(0, &irq0);
set_cyc2ns_scale(cpu_khz);
#ifndef CONFIG_SMP
time_init_gtod();
#endif
}
/*
@ -981,9 +982,9 @@ __cpuinit int unsynchronized_tsc(void)
}
/*
* Decide after all CPUs are booted what mode gettimeofday should use.
* Decide what mode gettimeofday should use.
*/
void __init time_init_gtod(void)
__init static char *time_init_gtod(void)
{
char *timetype;
@ -1011,8 +1012,7 @@ void __init time_init_gtod(void)
timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}
printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
return timetype;
}
__setup("report_lost_ticks", time_setup);

10
drivers/acpi/Kconfig
Просмотреть файл

@ -247,7 +247,7 @@ config ACPI_CUSTOM_DSDT_FILE
Enter the full path name to the file wich includes the AmlCode declaration.
config ACPI_BLACKLIST_YEAR
int "Disable ACPI for systems before Jan 1st this year" if X86
int "Disable ACPI for systems before Jan 1st this year" if X86_32
default 0
help
enter a 4-digit year, eg. 2001 to disable ACPI by default
@ -285,9 +285,8 @@ config ACPI_SYSTEM
dump your ACPI DSDT table using /proc/acpi/dsdt.
config X86_PM_TIMER
bool "Power Management Timer Support"
bool "Power Management Timer Support" if EMBEDDED
depends on X86
depends on !X86_64
default y
help
The Power Management Timer is available on all ACPI-capable,
@ -298,9 +297,8 @@ config X86_PM_TIMER
voltage scaling, unlike the commonly used Time Stamp Counter
(TSC) timing source.
So, if you see messages like 'Losing too many ticks!' in the
kernel logs, and/or you are using this on a notebook which
does not yet have an HPET, you should say "Y" here.
You should nearly always say Y here because many modern
systems require this timer.
config ACPI_CONTAINER
tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"

22
drivers/char/sx.c
Просмотреть файл

@ -1095,17 +1095,17 @@ static inline void sx_receive_chars (struct sx_port *port)
sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
/* Don't copy past the end of the hardware receive buffer */
if (rx_op + c > 0x100) c = 0x100 - rx_op;
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
/* Don't copy more bytes than there is room for in the buffer */
c = tty_prepare_flip_string(tty, &rp, c);
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
/* Don't copy past the end of the hardware receive buffer */
if (rx_op + c > 0x100) c = 0x100 - rx_op;
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
/* If for one reason or another, we can't copy more data, we're done! */
if (c == 0) break;
@ -2173,15 +2173,17 @@ static int probe_si (struct sx_board *board)
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit ();
return 0;
}
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
}
}
/* Now we're pretty much convinced that there is an SI board here,
@ -2192,15 +2194,17 @@ static int probe_si (struct sx_board *board)
if ( IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
func_exit();
return 0;
}
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
func_exit ();
return 0;
}
}
printheader ();

116
drivers/ieee1394/sbp2.c
Просмотреть файл

@ -137,15 +137,15 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)"
/*
* SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
* if your sbp2 device is not properly handling the SCSI inquiry command.
* This hack makes the inquiry look more like a typical MS Windows
* inquiry.
* This hack makes the inquiry look more like a typical MS Windows inquiry
* by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
*
* If force_inquiry_hack=1 is required for your device to work,
* please submit the logged sbp2_firmware_revision value of this device to
* the linux1394-devel mailing list.
*/
static int force_inquiry_hack;
module_param(force_inquiry_hack, int, 0444);
module_param(force_inquiry_hack, int, 0644);
MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
/*
@ -264,18 +264,17 @@ static struct hpsb_protocol_driver sbp2_driver = {
},
};
/* List of device firmware's that require a forced 36 byte inquiry. */
/*
* List of device firmwares that require the inquiry hack.
* Yields a few false positives but did not break other devices so far.
*/
static u32 sbp2_broken_inquiry_list[] = {
0x00002800, /* Stefan Richter <richtest@bauwesen.tu-cottbus.de> */
0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
/* DViCO Momobay CX-1 */
0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
/* QPS Fire DVDBurner */
};
#define NUM_BROKEN_INQUIRY_DEVS \
(sizeof(sbp2_broken_inquiry_list)/sizeof(*sbp2_broken_inquiry_list))
/**************************************
* General utility functions
**************************************/
@ -643,9 +642,15 @@ static int sbp2_remove(struct device *dev)
if (!scsi_id)
return 0;
/* Trigger shutdown functions in scsi's highlevel. */
if (scsi_id->scsi_host)
if (scsi_id->scsi_host) {
/* Get rid of enqueued commands if there is no chance to
* send them. */
if (!sbp2util_node_is_available(scsi_id))
sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
/* scsi_remove_device() will trigger shutdown functions of SCSI
* highlevel drivers which would deadlock if blocked. */
scsi_unblock_requests(scsi_id->scsi_host);
}
sdev = scsi_id->sdev;
if (sdev) {
scsi_id->sdev = NULL;
@ -742,11 +747,6 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
hi->host = ud->ne->host;
INIT_LIST_HEAD(&hi->scsi_ids);
/* Register our sbp2 status address space... */
hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_ops,
SBP2_STATUS_FIFO_ADDRESS,
SBP2_STATUS_FIFO_ADDRESS +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(SBP2_MAX_UDS_PER_NODE+1));
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/* Handle data movement if physical dma is not
* enabled/supportedon host controller */
@ -759,6 +759,18 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
/* Register the status FIFO address range. We could use the same FIFO
* for targets at different nodes. However we need different FIFOs per
* target in order to support multi-unit devices. */
scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
~0ULL, ~0ULL);
if (!scsi_id->status_fifo_addr) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
}
/* Register our host with the SCSI stack. */
scsi_host = scsi_host_alloc(&scsi_driver_template,
sizeof(unsigned long));
@ -997,6 +1009,10 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
SBP2_DMA_FREE("single query logins data");
}
if (scsi_id->status_fifo_addr)
hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
scsi_id->status_fifo_addr);
scsi_id->ud->device.driver_data = NULL;
SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id);
@ -1075,11 +1091,10 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized");
scsi_id->query_logins_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->query_logins_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
SBP2_STATUS_FIFO_ADDRESS_HI);
SBP2_DEBUG("sbp2_query_logins: status FIFO initialized");
scsi_id->query_logins_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->query_logins_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
@ -1184,11 +1199,10 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized");
scsi_id->login_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->login_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
SBP2_STATUS_FIFO_ADDRESS_HI);
SBP2_DEBUG("sbp2_login_device: status FIFO initialized");
scsi_id->login_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->login_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@ -1301,10 +1315,10 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->logout_orb->reserved5 = 0x0;
scsi_id->logout_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->logout_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) |
SBP2_STATUS_FIFO_ADDRESS_HI);
scsi_id->logout_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->logout_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@ -1366,10 +1380,10 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->reconnect_orb->reserved5 = 0x0;
scsi_id->reconnect_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO +
SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id);
scsi_id->reconnect_orb->status_FIFO_hi =
(ORB_SET_NODE_ID(hi->host->node_id) | SBP2_STATUS_FIFO_ADDRESS_HI);
scsi_id->reconnect_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->reconnect_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
/*
* Byte swap ORB if necessary
@ -1560,7 +1574,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
/* Check for a blacklisted set of devices that require us to force
* a 36 byte host inquiry. This can be overriden as a module param
* (to force all hosts). */
for (i = 0; i < NUM_BROKEN_INQUIRY_DEVS; i++) {
for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
if ((firmware_revision & 0xffff00) ==
sbp2_broken_inquiry_list[i]) {
SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
@ -2006,18 +2020,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
return -EIO;
}
/*
* The scsi stack sends down a request_bufflen which does not match the
* length field in the scsi cdb. This causes some sbp2 devices to
* reject this inquiry command. Fix the request_bufflen.
*/
if (*cmd == INQUIRY) {
if (force_inquiry_hack || scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK)
request_bufflen = cmd[4] = 0x24;
else
request_bufflen = cmd[4];
}
/*
* Now actually fill in the comamnd orb and sbp2 s/g list
*/
@ -2106,7 +2108,6 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
{
struct sbp2scsi_host_info *hi;
struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
u32 id;
struct scsi_cmnd *SCpnt = NULL;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
struct sbp2_command_info *command;
@ -2129,12 +2130,12 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest
}
/*
* Find our scsi_id structure by looking at the status fifo address written to by
* the sbp2 device.
* Find our scsi_id structure by looking at the status fifo address
* written to by the sbp2 device.
*/
id = SBP2_STATUS_FIFO_OFFSET_TO_ENTRY((u32)(addr - SBP2_STATUS_FIFO_ADDRESS));
list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) {
if (scsi_id_tmp->ne->nodeid == nodeid && scsi_id_tmp->ud->id == id) {
if (scsi_id_tmp->ne->nodeid == nodeid &&
scsi_id_tmp->status_fifo_addr == addr) {
scsi_id = scsi_id_tmp;
break;
}
@ -2475,7 +2476,16 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
{
((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev;
struct scsi_id_instance_data *scsi_id =
(struct scsi_id_instance_data *)sdev->host->hostdata[0];
scsi_id->sdev = sdev;
if (force_inquiry_hack ||
scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
sdev->inquiry_len = 36;
sdev->skip_ms_page_8 = 1;
}
return 0;
}

64
drivers/ieee1394/sbp2.h
Просмотреть файл

@ -33,15 +33,17 @@
#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31)
#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16)
#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id))
#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff)
#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
struct sbp2_command_orb {
volatile u32 next_ORB_hi;
@ -76,8 +78,8 @@ struct sbp2_login_orb {
u32 login_response_lo;
u32 lun_misc;
u32 passwd_resp_lengths;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff)
@ -102,8 +104,8 @@ struct sbp2_query_logins_orb {
u32 query_response_lo;
u32 lun_misc;
u32 reserved_resp_length;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff)
@ -123,8 +125,8 @@ struct sbp2_reconnect_orb {
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
struct sbp2_logout_orb {
@ -134,8 +136,8 @@ struct sbp2_logout_orb {
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_FIFO_hi;
u32 status_FIFO_lo;
u32 status_fifo_hi;
u32 status_fifo_lo;
};
#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff)
@ -195,30 +197,6 @@ struct sbp2_status_block {
* Miscellaneous SBP2 related config rom defines
*/
/* The status fifo address definition below is used as a base for each
* node, which a chunk seperately assigned to each unit directory in the
* node. For example, 0xfffe00000000ULL is used for the first sbp2 device
* detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node
* 0, and so on.
*
* Note: We could use a single status fifo address for all sbp2 devices,
* and figure out which sbp2 device the status belongs to by looking at
* the source node id of the status write... but, using separate addresses
* for each sbp2 unit directory allows for better code and the ability to
* support multiple luns within a single 1394 node.
*
* Also note that we choose the address range below as it is a region
* specified for write posting, where the ohci controller will
* automatically send an ack_complete when the status is written by the
* sbp2 device... saving a split transaction. =)
*/
#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL
#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe
#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0
#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5)
#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5)
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
#define SBP2_CSR_OFFSET_KEY 0x54
#define SBP2_UNIT_SPEC_ID_KEY 0x12
@ -258,7 +236,6 @@ struct sbp2_status_block {
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
#define SBP2_MAX_CMDS 8 /* This should be safe */
@ -337,6 +314,11 @@ struct scsi_id_instance_data {
u32 sbp2_lun;
u32 sbp2_firmware_revision;
/*
* Address for the device to write status blocks to
*/
u64 status_fifo_addr;
/*
* Variable used for logins, reconnects, logouts, query logins
*/

8
drivers/md/dm.c
Просмотреть файл

@ -849,10 +849,16 @@ static struct mapped_device *alloc_dev(unsigned int minor, int persistent)
static void free_dev(struct mapped_device *md)
{
free_minor(md->disk->first_minor);
unsigned int minor = md->disk->first_minor;
if (md->suspended_bdev) {
thaw_bdev(md->suspended_bdev, NULL);
bdput(md->suspended_bdev);
}
mempool_destroy(md->tio_pool);
mempool_destroy(md->io_pool);
del_gendisk(md->disk);
free_minor(minor);
put_disk(md->disk);
blk_put_queue(md->queue);
kfree(md);

1
drivers/mtd/chips/cfi_cmdset_0001.c
Просмотреть файл

@ -408,6 +408,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp;
cfi->chips[i].ref_point_counter = 0;
init_waitqueue_head(&(cfi->chips[i].wq));
}
map->fldrv = &cfi_intelext_chipdrv;

2
drivers/net/ifb.c
Просмотреть файл

@ -57,7 +57,7 @@ struct ifb_private {
struct sk_buff_head tq;
};
static int numifbs = 1;
static int numifbs = 2;
static void ri_tasklet(unsigned long dev);
static int ifb_xmit(struct sk_buff *skb, struct net_device *dev);

189
drivers/net/r8169.c
Просмотреть файл

@ -287,6 +287,20 @@ enum RTL8169_register_content {
TxInterFrameGapShift = 24,
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
/* Config1 register p.24 */
PMEnable = (1 << 0), /* Power Management Enable */
/* Config3 register p.25 */
MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
/* Config5 register p.27 */
BWF = (1 << 6), /* Accept Broadcast wakeup frame */
MWF = (1 << 5), /* Accept Multicast wakeup frame */
UWF = (1 << 4), /* Accept Unicast wakeup frame */
LanWake = (1 << 1), /* LanWake enable/disable */
PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
/* TBICSR p.28 */
TBIReset = 0x80000000,
TBILoopback = 0x40000000,
@ -433,6 +447,7 @@ struct rtl8169_private {
unsigned int (*phy_reset_pending)(void __iomem *);
unsigned int (*link_ok)(void __iomem *);
struct work_struct task;
unsigned wol_enabled : 1;
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@ -607,6 +622,80 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex)
*duplex = p->duplex;
}
static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
u8 options;
wol->wolopts = 0;
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
wol->supported = WAKE_ANY;
spin_lock_irq(&tp->lock);
options = RTL_R8(Config1);
if (!(options & PMEnable))
goto out_unlock;
options = RTL_R8(Config3);
if (options & LinkUp)
wol->wolopts |= WAKE_PHY;
if (options & MagicPacket)
wol->wolopts |= WAKE_MAGIC;
options = RTL_R8(Config5);
if (options & UWF)
wol->wolopts |= WAKE_UCAST;
if (options & BWF)
wol->wolopts |= WAKE_BCAST;
if (options & MWF)
wol->wolopts |= WAKE_MCAST;
out_unlock:
spin_unlock_irq(&tp->lock);
}
static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
int i;
static struct {
u32 opt;
u16 reg;
u8 mask;
} cfg[] = {
{ WAKE_ANY, Config1, PMEnable },
{ WAKE_PHY, Config3, LinkUp },
{ WAKE_MAGIC, Config3, MagicPacket },
{ WAKE_UCAST, Config5, UWF },
{ WAKE_BCAST, Config5, BWF },
{ WAKE_MCAST, Config5, MWF },
{ WAKE_ANY, Config5, LanWake }
};
spin_lock_irq(&tp->lock);
RTL_W8(Cfg9346, Cfg9346_Unlock);
for (i = 0; i < ARRAY_SIZE(cfg); i++) {
u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
if (wol->wolopts & cfg[i].opt)
options |= cfg[i].mask;
RTL_W8(cfg[i].reg, options);
}
RTL_W8(Cfg9346, Cfg9346_Lock);
tp->wol_enabled = (wol->wolopts) ? 1 : 0;
spin_unlock_irq(&tp->lock);
return 0;
}
static void rtl8169_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
@ -1025,6 +1114,8 @@ static struct ethtool_ops rtl8169_ethtool_ops = {
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
.get_regs = rtl8169_get_regs,
.get_wol = rtl8169_get_wol,
.set_wol = rtl8169_set_wol,
.get_strings = rtl8169_get_strings,
.get_stats_count = rtl8169_get_stats_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
@ -1442,6 +1533,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
}
tp->chipset = i;
RTL_W8(Cfg9346, Cfg9346_Unlock);
RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
RTL_W8(Cfg9346, Cfg9346_Lock);
*ioaddr_out = ioaddr;
*dev_out = dev;
out:
@ -1612,49 +1708,6 @@ rtl8169_remove_one(struct pci_dev *pdev)
pci_set_drvdata(pdev, NULL);
}
#ifdef CONFIG_PM
static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
if (!netif_running(dev))
return 0;
netif_device_detach(dev);
netif_stop_queue(dev);
spin_lock_irqsave(&tp->lock, flags);
/* Disable interrupts, stop Rx and Tx */
RTL_W16(IntrMask, 0);
RTL_W8(ChipCmd, 0);
/* Update the error counts. */
tp->stats.rx_missed_errors += RTL_R32(RxMissed);
RTL_W32(RxMissed, 0);
spin_unlock_irqrestore(&tp->lock, flags);
return 0;
}
static int rtl8169_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
if (!netif_running(dev))
return 0;
netif_device_attach(dev);
rtl8169_hw_start(dev);
return 0;
}
#endif /* CONFIG_PM */
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
struct net_device *dev)
{
@ -2700,6 +2753,56 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
return &tp->stats;
}
#ifdef CONFIG_PM
static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
if (!netif_running(dev))
goto out;
netif_device_detach(dev);
netif_stop_queue(dev);
spin_lock_irq(&tp->lock);
rtl8169_asic_down(ioaddr);
tp->stats.rx_missed_errors += RTL_R32(RxMissed);
RTL_W32(RxMissed, 0);
spin_unlock_irq(&tp->lock);
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
out:
return 0;
}
static int rtl8169_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
if (!netif_running(dev))
goto out;
netif_device_attach(dev);
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D0, 0);
rtl8169_schedule_work(dev, rtl8169_reset_task);
out:
return 0;
}
#endif /* CONFIG_PM */
static struct pci_driver rtl8169_pci_driver = {
.name = MODULENAME,
.id_table = rtl8169_pci_tbl,

4
drivers/net/sis900.c
Просмотреть файл

@ -540,7 +540,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
printk("%2.2x.\n", net_dev->dev_addr[i]);
/* Detect Wake on Lan support */
ret = inl(CFGPMC & PMESP);
ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
@ -2040,7 +2040,7 @@ static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wo
if (wol->wolopts == 0) {
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
cfgpmcsr |= ~PME_EN;
cfgpmcsr &= ~PME_EN;
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
outl(pmctrl_bits, pmctrl_addr);
if (netif_msg_wol(sis_priv))

75
drivers/net/skge.c
Просмотреть файл

@ -879,13 +879,12 @@ static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val)
int i;
xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
xm_read16(hw, port, XM_PHY_DATA);
*val = xm_read16(hw, port, XM_PHY_DATA);
/* Need to wait for external PHY */
for (i = 0; i < PHY_RETRIES; i++) {
udelay(1);
if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY)
goto ready;
udelay(1);
}
return -ETIMEDOUT;
@ -918,7 +917,12 @@ static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
ready:
xm_write16(hw, port, XM_PHY_DATA, val);
return 0;
for (i = 0; i < PHY_RETRIES; i++) {
if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
return 0;
udelay(1);
}
return -ETIMEDOUT;
}
static void genesis_init(struct skge_hw *hw)
@ -1168,13 +1172,17 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
u32 r;
const u8 zero[6] = { 0 };
/* Clear MIB counters */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
for (i = 0; i < 10; i++) {
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
MFF_SET_MAC_RST);
if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST)
goto reset_ok;
udelay(1);
}
printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
reset_ok:
/* Unreset the XMAC. */
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
@ -1191,7 +1199,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
r |= GP_DIR_2|GP_IO_2;
skge_write32(hw, B2_GP_IO, r);
skge_read32(hw, B2_GP_IO);
/* Enable GMII interface */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@ -1205,6 +1213,13 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
for (i = 1; i < 16; i++)
xm_outaddr(hw, port, XM_EXM(i), zero);
/* Clear MIB counters */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* configure Rx High Water Mark (XM_RX_HI_WM) */
xm_write16(hw, port, XM_RX_HI_WM, 1450);
@ -2170,8 +2185,10 @@ static int skge_up(struct net_device *dev)
skge->tx_avail = skge->tx_ring.count - 1;
/* Enable IRQ from port */
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= portirqmask[port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
/* Initialize MAC */
spin_lock_bh(&hw->phy_lock);
@ -2229,8 +2246,10 @@ static int skge_down(struct net_device *dev)
else
yukon_stop(skge);
spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
@ -2678,8 +2697,7 @@ static int skge_poll(struct net_device *dev, int *budget)
/* restart receiver */
wmb();
skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
CSR_START | CSR_IRQ_CL_F);
skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
*budget -= work_done;
dev->quota -= work_done;
@ -2687,10 +2705,11 @@ static int skge_poll(struct net_device *dev, int *budget)
if (work_done >= to_do)
return 1; /* not done */
netif_rx_complete(dev);
hw->intr_mask |= portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
skge_read32(hw, B0_IMSK);
spin_lock_irq(&hw->hw_lock);
__netif_rx_complete(dev);
hw->intr_mask |= portirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
return 0;
}
@ -2850,18 +2869,10 @@ static void skge_extirq(unsigned long data)
}
spin_unlock(&hw->phy_lock);
local_irq_disable();
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
local_irq_enable();
}
static inline void skge_wakeup(struct net_device *dev)
{
struct skge_port *skge = netdev_priv(dev);
prefetch(skge->rx_ring.to_clean);
netif_rx_schedule(dev);
spin_unlock_irq(&hw->hw_lock);
}
static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
@ -2872,15 +2883,17 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0 || status == ~0) /* hotplug or shared irq */
return IRQ_NONE;
status &= hw->intr_mask;
spin_lock(&hw->hw_lock);
if (status & IS_R1_F) {
skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R1_F;
skge_wakeup(hw->dev[0]);
netif_rx_schedule(hw->dev[0]);
}
if (status & IS_R2_F) {
skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
hw->intr_mask &= ~IS_R2_F;
skge_wakeup(hw->dev[1]);
netif_rx_schedule(hw->dev[1]);
}
if (status & IS_XA1_F)
@ -2922,6 +2935,7 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
}
skge_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@ -3290,6 +3304,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
hw->pdev = pdev;
spin_lock_init(&hw->phy_lock);
spin_lock_init(&hw->hw_lock);
tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);

1
drivers/net/skge.h
Просмотреть файл

@ -2402,6 +2402,7 @@ struct skge_hw {
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
spinlock_t hw_lock;
};
enum {

177
drivers/net/sky2.c
Просмотреть файл

@ -195,11 +195,11 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
pr_debug("sky2_set_power_state %d\n", state);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
(power_control & PCI_PM_CAP_PME_D3cold);
pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
power_control |= PCI_PM_CTRL_PME_STATUS;
power_control &= ~(PCI_PM_CTRL_STATE_MASK);
@ -223,7 +223,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
/* Turn off phy power saving */
pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
/* looks like this XL is back asswards .. */
@ -232,18 +232,28 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
if (hw->ports > 1)
reg1 |= PCI_Y2_PHY2_COMA;
}
pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
reg1 &= P_ASPM_CONTROL_MSK;
sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
sky2_pci_write32(hw, PCI_DEV_REG5, 0);
}
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
break;
case PCI_D3hot:
case PCI_D3cold:
/* Turn on phy power saving */
pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
else
reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@ -265,7 +275,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
ret = -1;
}
pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
return ret;
}
@ -463,16 +473,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
/* apply fixes in PHY AFE */
gm_phy_write(hw, port, 22, 255);
/* increase differential signal amplitude in 10BASE-T */
gm_phy_write(hw, port, 24, 0xaa99);
gm_phy_write(hw, port, 23, 0x2011);
/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
gm_phy_write(hw, port, 24, 0xa204);
gm_phy_write(hw, port, 23, 0x2002);
/* set page register to 0 */
gm_phy_write(hw, port, 22, 0);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
if (ledover)
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
if (ledover)
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
/* Enable phy interrupt on auto-negotiation complete (or link up) */
if (sky2->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
@ -953,6 +978,12 @@ static int sky2_rx_start(struct sky2_port *sky2)
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
/* MAC Rx RAM Read is controlled by hardware */
sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
}
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
rx_set_checksum(sky2);
@ -1035,9 +1066,10 @@ static int sky2_up(struct net_device *dev)
RB_RST_SET);
sky2_qset(hw, txqaddr[port]);
if (hw->chip_id == CHIP_ID_YUKON_EC_U)
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
/* Set almost empty threshold */
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
@ -1047,8 +1079,10 @@ static int sky2_up(struct net_device *dev)
goto err_out;
/* Enable interrupts from phy/mac for port */
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
return 0;
err_out:
@ -1348,10 +1382,10 @@ static int sky2_down(struct net_device *dev)
netif_stop_queue(dev);
/* Disable port IRQ */
local_irq_disable();
spin_lock_irq(&hw->hw_lock);
hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
local_irq_enable();
spin_unlock_irq(&hw->hw_lock);
flush_scheduled_work();
@ -1633,10 +1667,10 @@ static void sky2_phy_task(void *arg)
out:
up(&sky2->phy_sema);
local_irq_disable();
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
local_irq_enable();
spin_unlock_irq(&hw->hw_lock);
}
@ -1863,6 +1897,17 @@ static int sky2_poll(struct net_device *dev0, int *budget)
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
/*
* Kick the STAT_LEV_TIMER_CTRL timer.
* This fixes my hangs on Yukon-EC (0xb6) rev 1.
* The if clause is there to start the timer only if it has been
* configured correctly and not been disabled via ethtool.
*/
if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) {
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
}
hwidx = sky2_read16(hw, STAT_PUT_IDX);
BUG_ON(hwidx >= STATUS_RING_SIZE);
rmb();
@ -1945,16 +1990,19 @@ exit_loop:
sky2_tx_check(hw, 0, tx_done[0]);
sky2_tx_check(hw, 1, tx_done[1]);
if (likely(work_done < to_do)) {
/* need to restart TX timer */
if (is_ec_a1(hw)) {
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
if (likely(work_done < to_do)) {
spin_lock_irq(&hw->hw_lock);
__netif_rx_complete(dev0);
netif_rx_complete(dev0);
hw->intr_mask |= Y2_IS_STAT_BMU;
sky2_write32(hw, B0_IMSK, hw->intr_mask);
spin_unlock_irq(&hw->hw_lock);
return 0;
} else {
*budget -= work_done;
@ -2017,13 +2065,13 @@ static void sky2_hw_intr(struct sky2_hw *hw)
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
pci_name(hw->pdev), pci_err);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_write_config_word(hw->pdev, PCI_STATUS,
sky2_pci_write16(hw, PCI_STATUS,
pci_err | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
@ -2032,7 +2080,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
/* PCI-Express uncorrectable Error occurred */
u32 pex_err;
pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
if (net_ratelimit())
printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
@ -2040,7 +2088,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
/* clear the interrupt */
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
0xffffffffUL);
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
@ -2086,6 +2134,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
sky2_write32(hw, B0_IMSK, hw->intr_mask);
schedule_work(&sky2->phy_task);
}
@ -2099,6 +2148,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0 || status == ~0)
return IRQ_NONE;
spin_lock(&hw->hw_lock);
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
@ -2127,7 +2177,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
sky2_write32(hw, B0_Y2_SP_ICR, 2);
sky2_read32(hw, B0_IMSK);
spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
@ -2170,7 +2220,7 @@ static int sky2_reset(struct sky2_hw *hw)
{
u16 status;
u8 t8, pmd_type;
int i, err;
int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
@ -2192,25 +2242,18 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, B0_CTST, CS_RST_CLR);
/* clear PCI errors, if any */
err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
if (err)
goto pci_err;
status = sky2_pci_read16(hw, PCI_STATUS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
err = pci_write_config_word(hw->pdev, PCI_STATUS,
status | PCI_STATUS_ERROR_BITS);
if (err)
goto pci_err;
sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
/* clear any PEX errors */
if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
0xffffffffUL);
if (err)
goto pci_err;
}
if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
@ -2309,8 +2352,7 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7));
}
/* enable status unit */
@ -2321,14 +2363,6 @@ static int sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
return 0;
pci_err:
/* This is to catch a BIOS bug workaround where
* mmconfig table doesn't have other buses.
*/
printk(KERN_ERR PFX "%s: can't access PCI config space\n",
pci_name(hw->pdev));
return err;
}
static u32 sky2_supported_modes(const struct sky2_hw *hw)
@ -2852,11 +2886,11 @@ static int sky2_set_coalesce(struct net_device *dev,
(ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
return -EINVAL;
if (ecmd->tx_max_coalesced_frames > 0xffff)
if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
return -EINVAL;
if (ecmd->rx_max_coalesced_frames > 0xff)
if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
return -EINVAL;
if (ecmd->rx_max_coalesced_frames_irq > 0xff)
if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
return -EINVAL;
if (ecmd->tx_coalesce_usecs == 0)
@ -3198,17 +3232,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
}
}
#ifdef __BIG_ENDIAN
/* byte swap descriptors in hardware */
{
u32 reg;
pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
reg |= PCI_REV_DESC;
pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
}
#endif
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
@ -3226,6 +3249,18 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out_free_hw;
}
hw->pm_cap = pm_cap;
spin_lock_init(&hw->hw_lock);
#ifdef __BIG_ENDIAN
/* byte swap descriptors in hardware */
{
u32 reg;
reg = sky2_pci_read32(hw, PCI_DEV_REG2);
reg |= PCI_REV_DESC;
sky2_pci_write32(hw, PCI_DEV_REG2, reg);
}
#endif
/* ring for status responses */
hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,

83
drivers/net/sky2.h
Просмотреть файл

@ -5,14 +5,22 @@
#define _SKY2_H
/* PCI config registers */
#define PCI_DEV_REG1 0x40
#define PCI_DEV_REG2 0x44
#define PCI_DEV_STATUS 0x7c
#define PCI_OS_PCI_X (1<<26)
enum {
PCI_DEV_REG1 = 0x40,
PCI_DEV_REG2 = 0x44,
PCI_DEV_STATUS = 0x7c,
PCI_DEV_REG3 = 0x80,
PCI_DEV_REG4 = 0x84,
PCI_DEV_REG5 = 0x88,
};
#define PEX_LNK_STAT 0xf2
#define PEX_UNC_ERR_STAT 0x104
#define PEX_DEV_CTRL 0xe8
enum {
PEX_DEV_CAP = 0xe4,
PEX_DEV_CTRL = 0xe8,
PEX_DEV_STA = 0xea,
PEX_LNK_STAT = 0xf2,
PEX_UNC_ERR_STAT= 0x104,
};
/* Yukon-2 */
enum pci_dev_reg_1 {
@ -37,6 +45,25 @@ enum pci_dev_reg_2 {
PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */
};
/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
enum pci_dev_reg_4 {
/* (Link Training & Status State Machine) */
P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */
/* (Active State Power Management) */
P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */
P_ASPM_GPHY_LINK_DOWN = 1<<14, /* GPHY Link Down (A1 only) */
P_ASPM_INT_FIFO_EMPTY = 1<<13, /* Internal FIFO Empty (A1 only) */
P_ASPM_CLKRUN_REQUEST = 1<<12, /* CLKRUN Request (A1 only) */
P_ASPM_FORCE_CLKREQ_ENA = 1<<4, /* Force CLKREQ Enable (A1b only) */
P_ASPM_CLKREQ_PAD_CTL = 1<<3, /* CLKREQ PAD Control (A1 only) */
P_ASPM_A1_MODE_SELECT = 1<<2, /* A1 Mode Select (A1 only) */
P_CLK_GATE_PEX_UNIT_ENA = 1<<1, /* Enable Gate PEX Unit Clock */
P_CLK_GATE_ROOT_COR_ENA = 1<<0, /* Enable Gate Root Core Clock */
P_ASPM_CONTROL_MSK = P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN
| P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
};
#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
PCI_STATUS_SIG_SYSTEM_ERROR | \
@ -507,6 +534,16 @@ enum {
};
#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
/* Q_F 32 bit Flag Register */
enum {
F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */
F_EMPTY = 1<<27, /* Tx FIFO: empty flag */
F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */
F_WM_REACHED = 1<<25, /* Watermark reached */
F_M_RX_RAM_DIS = 1<<24, /* MAC Rx RAM Read Port disable */
F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */
F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */
};
/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
enum {
@ -909,10 +946,12 @@ enum {
PHY_BCOM_ID1_C0 = 0x6044,
PHY_BCOM_ID1_C5 = 0x6047,
PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */
PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */
PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */
PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */
PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE (PHY 88E3082 Rev.A1) */
PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU (PHY 88E1149 Rev.B2?) */
};
/* Advertisement register bits */
@ -1837,8 +1876,9 @@ struct sky2_port {
struct sky2_hw {
void __iomem *regs;
struct pci_dev *pdev;
u32 intr_mask;
struct net_device *dev[2];
spinlock_t hw_lock;
u32 intr_mask;
int pm_cap;
int msi;
@ -1912,4 +1952,25 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg,
gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
}
/* PCI config space access */
static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
{
return sky2_read32(hw, Y2_CFG_SPC + reg);
}
static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
{
return sky2_read16(hw, Y2_CFG_SPC + reg);
}
static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
{
sky2_write32(hw, Y2_CFG_SPC + reg, val);
}
static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
{
sky2_write16(hw, Y2_CFG_SPC + reg, val);
}
#endif

9
drivers/net/tg3.c
Просмотреть файл

@ -9408,6 +9408,15 @@ static int __devinit tg3_is_sun_570X(struct tg3 *tp)
return 0;
if (venid == PCI_VENDOR_ID_SUN)
return 1;
/* TG3 chips onboard the SunBlade-2500 don't have the
* subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
* are distinguishable from non-Sun variants by being
* named "network" by the firmware. Non-Sun cards will
* show up as being named "ethernet".
*/
if (!strcmp(pcp->prom_name, "network"))
return 1;
}
return 0;
}

2
drivers/net/tlan.c
Просмотреть файл

@ -536,6 +536,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
u16 device_id;
int reg, rc = -ENODEV;
#ifdef CONFIG_PCI
if (pdev) {
rc = pci_enable_device(pdev);
if (rc)
@ -547,6 +548,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
goto err_out;
}
}
#endif /* CONFIG_PCI */
dev = alloc_etherdev(sizeof(TLanPrivateInfo));
if (dev == NULL) {

4
drivers/scsi/libata-core.c
Просмотреть файл

@ -82,6 +82,10 @@ int atapi_enabled = 0;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");

2
drivers/scsi/libata-scsi.c
Просмотреть файл

@ -1708,6 +1708,8 @@ static int ata_dev_supports_fua(u16 *id)
{
unsigned char model[41], fw[9];
if (!libata_fua)
return 0;
if (!ata_id_has_fua(id))
return 0;

1
drivers/scsi/libata.h
Просмотреть файл

@ -41,6 +41,7 @@ struct ata_scsi_args {
/* libata-core.c */
extern int atapi_enabled;
extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);

52
drivers/scsi/sata_sil.c
Просмотреть файл

@ -49,11 +49,13 @@
#define DRV_VERSION "0.9"
enum {
SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
sil_3112 = 0,
sil_3112_m15w = 1,
sil_3114 = 2,
sil_3512 = 2,
sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
@ -90,7 +92,7 @@ static void sil_post_set_mode (struct ata_port *ap);
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
@ -185,7 +187,8 @@ static const struct ata_port_info sil_port_info[] = {
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
}, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
},
/* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@ -195,11 +198,24 @@ static const struct ata_port_info sil_port_info[] = {
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
}, /* sil_3114 */
},
/* sil_3512 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
ATA_FLAG_SRST | ATA_FLAG_MMIO |
SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
},
/* sil_3114 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@ -216,12 +232,13 @@ static const struct {
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
{ 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
{ 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
{ 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
{ 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
{ 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
{ 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
{ 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
{ 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
@ -471,6 +488,23 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
/* Apply R_ERR on DMA activate FIS errata workaround */
if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
int cnt;
for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
tmp = readl(mmio_base + sil_port[i].sfis_cfg);
if ((tmp & 0x3) != 0x01)
continue;
if (!cnt)
dev_printk(KERN_INFO, &pdev->dev,
"Applying R_ERR on DMA activate "
"FIS errata fix\n");
writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
cnt++;
}
}
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;

20
drivers/scsi/sd.c
Просмотреть файл

@ -89,6 +89,11 @@
#define SD_MAX_RETRIES 5
#define SD_PASSTHROUGH_RETRIES 1
/*
* Size of the initial data buffer for mode and read capacity data
*/
#define SD_BUF_SIZE 512
static void scsi_disk_release(struct kref *kref);
struct scsi_disk {
@ -1239,7 +1244,7 @@ sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
/*
* read write protect setting, if possible - called only in sd_revalidate_disk()
* called with buffer of length 512
* called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
@ -1297,7 +1302,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
/*
* sd_read_cache_type - called only from sd_revalidate_disk()
* called with buffer of length 512
* called with buffer of length SD_BUF_SIZE
*/
static void
sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
@ -1342,6 +1347,8 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
/* Take headers and block descriptors into account */
len += data.header_length + data.block_descriptor_length;
if (len > SD_BUF_SIZE)
goto bad_sense;
/* Get the data */
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
@ -1354,6 +1361,12 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
int ct = 0;
int offset = data.header_length + data.block_descriptor_length;
if (offset >= SD_BUF_SIZE - 2) {
printk(KERN_ERR "%s: malformed MODE SENSE response",
diskname);
goto defaults;
}
if ((buffer[offset] & 0x3f) != modepage) {
printk(KERN_ERR "%s: got wrong page\n", diskname);
goto defaults;
@ -1398,6 +1411,7 @@ defaults:
diskname);
sdkp->WCE = 0;
sdkp->RCD = 0;
sdkp->DPOFUA = 0;
}
/**
@ -1421,7 +1435,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
if (!scsi_device_online(sdp))
goto out;
buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA);
buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
if (!buffer) {
printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
"failure.\n");

6
drivers/serial/8250.c
Просмотреть файл

@ -2326,6 +2326,12 @@ static struct uart_driver serial8250_reg = {
.cons = SERIAL8250_CONSOLE,
};
/*
* early_serial_setup - early registration for 8250 ports
*
* Setup an 8250 port structure prior to console initialisation. Use
* after console initialisation will cause undefined behaviour.
*/
int __init early_serial_setup(struct uart_port *port)
{
if (port->line >= ARRAY_SIZE(serial8250_ports))

2
drivers/video/Kconfig
Просмотреть файл

@ -520,7 +520,7 @@ config FB_GBE
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
default 8
default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.

21
drivers/video/asiliantfb.c
Просмотреть файл

@ -322,32 +322,29 @@ static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
writeb(green, mmio_base + 0x791);
writeb(blue, mmio_base + 0x791);
switch(p->var.bits_per_pixel) {
case 15:
if (regno < 16) {
if (regno < 16) {
switch(p->var.red.offset) {
case 10: /* RGB 555 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 7) |
((green & 0xf8) << 2) |
((blue & 0xf8) >> 3);
}
break;
case 16:
if (regno < 16) {
break;
case 11: /* RGB 565 */
((u32 *)(p->pseudo_palette))[regno] =
((red & 0xf8) << 8) |
((green & 0xfc) << 3) |
((blue & 0xf8) >> 3);
}
break;
case 24:
if (regno < 24) {
break;
case 16: /* RGB 888 */
((u32 *)(p->pseudo_palette))[regno] =
(red << 16) |
(green << 8) |
(blue);
break;
}
break;
}
return 0;
}

3
drivers/video/au1100fb.c
Просмотреть файл

@ -49,6 +49,7 @@
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
@ -406,7 +407,7 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
vma->vm_flags |= VM_IO;
if (io_remap_page_range(vma, vma->vm_start, off,
if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot)) {
return -EAGAIN;

67
drivers/video/console/vgacon.c
Просмотреть файл

@ -509,57 +509,60 @@ static int vgacon_doresize(struct vc_data *c,
{
unsigned long flags;
unsigned int scanlines = height * c->vc_font.height;
u8 scanlines_lo, r7, vsync_end, mode, max_scan;
u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
spin_lock_irqsave(&vga_lock, flags);
outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
max_scan = inb_p(vga_video_port_val);
if (max_scan & 0x80)
scanlines <<= 1;
vgacon_xres = width * VGA_FONTWIDTH;
vgacon_yres = height * c->vc_font.height;
outb_p(VGA_CRTC_MODE, vga_video_port_reg);
mode = inb_p(vga_video_port_val);
if (vga_video_type >= VIDEO_TYPE_VGAC) {
outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
max_scan = inb_p(vga_video_port_val);
if (mode & 0x04)
scanlines >>= 1;
if (max_scan & 0x80)
scanlines <<= 1;
scanlines -= 1;
scanlines_lo = scanlines & 0xff;
outb_p(VGA_CRTC_MODE, vga_video_port_reg);
mode = inb_p(vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
r7 = inb_p(vga_video_port_val) & ~0x42;
if (mode & 0x04)
scanlines >>= 1;
if (scanlines & 0x100)
r7 |= 0x02;
if (scanlines & 0x200)
r7 |= 0x40;
scanlines -= 1;
scanlines_lo = scanlines & 0xff;
/* deprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
vsync_end = inb_p(vga_video_port_val);
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end & ~0x80, vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
r7 = inb_p(vga_video_port_val) & ~0x42;
if (scanlines & 0x100)
r7 |= 0x02;
if (scanlines & 0x200)
r7 |= 0x40;
/* deprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
vsync_end = inb_p(vga_video_port_val);
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end & ~0x80, vga_video_port_val);
}
outb_p(VGA_CRTC_H_DISP, vga_video_port_reg);
outb_p(width - 1, vga_video_port_val);
outb_p(VGA_CRTC_OFFSET, vga_video_port_reg);
outb_p(width >> 1, vga_video_port_val);
outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
outb_p(scanlines_lo, vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
outb_p(r7,vga_video_port_val);
if (vga_video_type >= VIDEO_TYPE_VGAC) {
outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
outb_p(scanlines_lo, vga_video_port_val);
outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
outb_p(r7,vga_video_port_val);
/* reprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end, vga_video_port_val);
/* reprotect registers */
outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
outb_p(vsync_end, vga_video_port_val);
}
spin_unlock_irqrestore(&vga_lock, flags);
return 0;
}

3
drivers/video/gbefb.c
Просмотреть файл

@ -656,12 +656,15 @@ static int gbefb_set_par(struct fb_info *info)
switch (bytesPerPixel) {
case 1:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 2:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 4:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
}
SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);

5
fs/binfmt_elf.c
Просмотреть файл

@ -938,6 +938,11 @@ static int load_elf_binary(struct linux_binprm * bprm, struct pt_regs * regs)
kfree(elf_interpreter);
} else {
elf_entry = loc->elf_ex.e_entry;
if (BAD_ADDR(elf_entry)) {
send_sig(SIGSEGV, current, 0);
retval = -ENOEXEC; /* Nobody gets to see this, but.. */
goto out_free_dentry;
}
}
kfree(elf_phdata);

13
fs/compat_ioctl.c
Просмотреть файл

@ -2531,18 +2531,9 @@ static int rtc_ioctl(unsigned fd, unsigned cmd, unsigned long arg)
val32 = kval;
return put_user(val32, (unsigned int __user *)arg);
case RTC_IRQP_SET32:
return sys_ioctl(fd, RTC_IRQP_SET, arg);
case RTC_EPOCH_SET32:
ret = get_user(val32, (unsigned int __user *)arg);
if (ret)
return ret;
kval = val32;
set_fs(KERNEL_DS);
ret = sys_ioctl(fd, (cmd == RTC_IRQP_SET32) ?
RTC_IRQP_SET : RTC_EPOCH_SET,
(unsigned long)&kval);
set_fs(oldfs);
return ret;
return sys_ioctl(fd, RTC_EPOCH_SET, arg);
default:
/* unreached */
return -ENOIOCTLCMD;

8
fs/namei.c
Просмотреть файл

@ -2224,13 +2224,17 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
* and other special files. --ADM
*/
asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
int newdfd, const char __user *newname)
int newdfd, const char __user *newname,
int flags)
{
struct dentry *new_dentry;
struct nameidata nd, old_nd;
int error;
char * to;
if (flags != 0)
return -EINVAL;
to = getname(newname);
if (IS_ERR(to))
return PTR_ERR(to);
@ -2263,7 +2267,7 @@ exit:
asmlinkage long sys_link(const char __user *oldname, const char __user *newname)
{
return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname);
return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
}
/*

36
fs/ntfs/ChangeLog
Просмотреть файл

@ -1,9 +1,9 @@
ToDo/Notes:
- Find and fix bugs.
- The only places in the kernel where a file is resized are
ntfs_file_write*() and ntfs_truncate() for both of which i_sem is
ntfs_file_write*() and ntfs_truncate() for both of which i_mutex is
held. Just have to be careful in read-/writepage and other helpers
not running under i_sem that we play nice... Also need to be careful
not running under i_mutex that we play nice. Also need to be careful
with initialized_size extension in ntfs_file_write*() and writepage.
UPDATE: The only things that need to be checked are the compressed
write and the other attribute resize/write cases like index
@ -19,6 +19,24 @@ ToDo/Notes:
- Enable the code for setting the NT4 compatibility flag when we start
making NTFS 1.2 specific modifications.
2.1.26 - Minor bug fixes and updates.
- Fix a potential overflow in file.c where a cast to s64 was missing in
a left shift of a page index.
- The struct inode has had its i_sem semaphore changed to a mutex named
i_mutex.
- We have struct kmem_cache now so use it instead of the typedef
kmem_cache_t. (Pekka Enberg)
- Implement support for sector sizes above 512 bytes (up to the maximum
supported by NTFS which is 4096 bytes).
- Do more detailed reporting of why we cannot mount read-write by
special casing the VOLUME_MODIFIED_BY_CHKDSK flag.
- Miscellaneous updates to layout.h.
- Cope with attribute list attribute having invalid flags. Windows
copes with this and even chkdsk does not detect or fix this so we
have to cope with it, too. Thanks to Pawel Kot for reporting the
problem.
2.1.25 - (Almost) fully implement write(2) and truncate(2).
- Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and
@ -373,7 +391,7 @@ ToDo/Notes:
single one of them had an mst error. (Thanks to Ken MacFerrin for
the bug report.)
- Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date()
where we failed to release i_sem on the $Quota/$Q attribute inode.
where we failed to release i_mutex on the $Quota/$Q attribute inode.
- Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup().
- Add mapping of unmapped buffers to all remaining code paths, i.e.
fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
@ -874,7 +892,7 @@ ToDo/Notes:
clusters. (Philipp Thomas)
- attrib.c::load_attribute_list(): Fix bug when initialized_size is a
multiple of the block_size but not the cluster size. (Szabolcs
Szakacsits <szaka@sienet.hu>)
Szakacsits)
2.1.2 - Important bug fixes aleviating the hangs in statfs.
@ -884,7 +902,7 @@ ToDo/Notes:
- Add handling for initialized_size != data_size in compressed files.
- Reduce function local stack usage from 0x3d4 bytes to just noise in
fs/ntfs/upcase.c. (Randy Dunlap <rdunlap@xenotime.net>)
fs/ntfs/upcase.c. (Randy Dunlap)
- Remove compiler warnings for newer gcc.
- Pages are no longer kmapped by mm/filemap.c::generic_file_write()
around calls to ->{prepare,commit}_write. Adapt NTFS appropriately
@ -1201,11 +1219,11 @@ ToDo/Notes:
the kernel. We probably want a kernel generic init_address_space()
function...
- Drop BKL from ntfs_readdir() after consultation with Al Viro. The
only caller of ->readdir() is vfs_readdir() which holds i_sem during
the call, and i_sem is sufficient protection against changes in the
directory inode (including ->i_size).
only caller of ->readdir() is vfs_readdir() which holds i_mutex
during the call, and i_mutex is sufficient protection against changes
in the directory inode (including ->i_size).
- Use generic_file_llseek() for directories (as opposed to
default_llseek()) as this downs i_sem instead of the BKL which is
default_llseek()) as this downs i_mutex instead of the BKL which is
what we now need for exclusion against ->f_pos changes considering we
no longer take the BKL in ntfs_readdir().

2
fs/ntfs/Makefile
Просмотреть файл

@ -6,7 +6,7 @@ ntfs-objs := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \
index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
unistr.o upcase.o
EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.25\"
EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.26\"
ifeq ($(CONFIG_NTFS_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG

18
fs/ntfs/aops.c
Просмотреть файл

@ -2,7 +2,7 @@
* aops.c - NTFS kernel address space operations and page cache handling.
* Part of the Linux-NTFS project.
*
* Copyright (c) 2001-2005 Anton Altaparmakov
* Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@ -200,8 +200,8 @@ static int ntfs_read_block(struct page *page)
/* $MFT/$DATA must have its complete runlist in memory at all times. */
BUG_ON(!ni->runlist.rl && !ni->mft_no && !NInoAttr(ni));
blocksize_bits = VFS_I(ni)->i_blkbits;
blocksize = 1 << blocksize_bits;
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
create_empty_buffers(page, blocksize, 0);
@ -569,10 +569,8 @@ static int ntfs_write_block(struct page *page, struct writeback_control *wbc)
BUG_ON(!NInoNonResident(ni));
BUG_ON(NInoMstProtected(ni));
blocksize_bits = vi->i_blkbits;
blocksize = 1 << blocksize_bits;
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
BUG_ON(!PageUptodate(page));
create_empty_buffers(page, blocksize,
@ -949,8 +947,8 @@ static int ntfs_write_mst_block(struct page *page,
*/
BUG_ON(!(is_mft || S_ISDIR(vi->i_mode) ||
(NInoAttr(ni) && ni->type == AT_INDEX_ALLOCATION)));
bh_size_bits = vi->i_blkbits;
bh_size = 1 << bh_size_bits;
bh_size = vol->sb->s_blocksize;
bh_size_bits = vol->sb->s_blocksize_bits;
max_bhs = PAGE_CACHE_SIZE / bh_size;
BUG_ON(!max_bhs);
BUG_ON(max_bhs > MAX_BUF_PER_PAGE);
@ -1596,7 +1594,7 @@ void mark_ntfs_record_dirty(struct page *page, const unsigned int ofs) {
BUG_ON(!PageUptodate(page));
end = ofs + ni->itype.index.block_size;
bh_size = 1 << VFS_I(ni)->i_blkbits;
bh_size = VFS_I(ni)->i_sb->s_blocksize;
spin_lock(&mapping->private_lock);
if (unlikely(!page_has_buffers(page))) {
spin_unlock(&mapping->private_lock);

10
fs/ntfs/file.c
Просмотреть файл

@ -1,7 +1,7 @@
/*
* file.c - NTFS kernel file operations. Part of the Linux-NTFS project.
*
* Copyright (c) 2001-2005 Anton Altaparmakov
* Copyright (c) 2001-2006 Anton Altaparmakov
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
@ -248,7 +248,7 @@ do_non_resident_extend:
* enough to make ntfs_writepage() work.
*/
write_lock_irqsave(&ni->size_lock, flags);
ni->initialized_size = (index + 1) << PAGE_CACHE_SHIFT;
ni->initialized_size = (s64)(index + 1) << PAGE_CACHE_SHIFT;
if (ni->initialized_size > new_init_size)
ni->initialized_size = new_init_size;
write_unlock_irqrestore(&ni->size_lock, flags);
@ -529,8 +529,8 @@ static int ntfs_prepare_pages_for_non_resident_write(struct page **pages,
"index 0x%lx, nr_pages 0x%x, pos 0x%llx, bytes 0x%zx.",
vi->i_ino, ni->type, pages[0]->index, nr_pages,
(long long)pos, bytes);
blocksize_bits = vi->i_blkbits;
blocksize = 1 << blocksize_bits;
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
u = 0;
do {
struct page *page = pages[u];
@ -1525,7 +1525,7 @@ static inline int ntfs_commit_pages_after_non_resident_write(
vi = pages[0]->mapping->host;
ni = NTFS_I(vi);
blocksize = 1 << vi->i_blkbits;
blocksize = vi->i_sb->s_blocksize;
end = pos + bytes;
u = 0;
do {

49
fs/ntfs/inode.c
Просмотреть файл

@ -677,13 +677,28 @@ static int ntfs_read_locked_inode(struct inode *vi)
ntfs_debug("Attribute list found in inode 0x%lx.", vi->i_ino);
NInoSetAttrList(ni);
a = ctx->attr;
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_COMPRESSION_MASK ||
a->flags & ATTR_IS_SPARSE) {
if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(vi->i_sb, "Attribute list attribute is "
"compressed/encrypted/sparse.");
"compressed.");
goto unm_err_out;
}
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_IS_SPARSE) {
if (a->non_resident) {
ntfs_error(vi->i_sb, "Non-resident attribute "
"list attribute is encrypted/"
"sparse.");
goto unm_err_out;
}
ntfs_warning(vi->i_sb, "Resident attribute list "
"attribute in inode 0x%lx is marked "
"encrypted/sparse which is not true. "
"However, Windows allows this and "
"chkdsk does not detect or correct it "
"so we will just ignore the invalid "
"flags and pretend they are not set.",
vi->i_ino);
}
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
@ -1809,19 +1824,33 @@ int ntfs_read_inode_mount(struct inode *vi)
} else /* if (!err) */ {
ATTR_LIST_ENTRY *al_entry, *next_al_entry;
u8 *al_end;
static const char *es = " Not allowed. $MFT is corrupt. "
"You should run chkdsk.";
ntfs_debug("Attribute list attribute found in $MFT.");
NInoSetAttrList(ni);
a = ctx->attr;
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_COMPRESSION_MASK ||
a->flags & ATTR_IS_SPARSE) {
if (a->flags & ATTR_COMPRESSION_MASK) {
ntfs_error(sb, "Attribute list attribute is "
"compressed/encrypted/sparse. Not "
"allowed. $MFT is corrupt. You should "
"run chkdsk.");
"compressed.%s", es);
goto put_err_out;
}
if (a->flags & ATTR_IS_ENCRYPTED ||
a->flags & ATTR_IS_SPARSE) {
if (a->non_resident) {
ntfs_error(sb, "Non-resident attribute list "
"attribute is encrypted/"
"sparse.%s", es);
goto put_err_out;
}
ntfs_warning(sb, "Resident attribute list attribute "
"in $MFT system file is marked "
"encrypted/sparse which is not true. "
"However, Windows allows this and "
"chkdsk does not detect or correct it "
"so we will just ignore the invalid "
"flags and pretend they are not set.");
}
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);

25
fs/ntfs/layout.h
Просмотреть файл

@ -838,15 +838,19 @@ enum {
F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT,
F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask
is used to to obtain all flags that are valid for setting. */
/*
* The following flags are only present in the FILE_NAME attribute (in
* The following flag is only present in the FILE_NAME attribute (in
* the field file_attributes).
*/
FILE_ATTR_DUP_FILE_NAME_INDEX_PRESENT = const_cpu_to_le32(0x10000000),
/* Note, this is a copy of the corresponding bit from the mft record,
telling us whether this is a directory or not, i.e. whether it has
an index root attribute or not. */
/*
* The following flag is present both in the STANDARD_INFORMATION
* attribute and in the FILE_NAME attribute (in the field
* file_attributes).
*/
FILE_ATTR_DUP_VIEW_INDEX_PRESENT = const_cpu_to_le32(0x20000000),
/* Note, this is a copy of the corresponding bit from the mft record,
telling us whether this file has a view index present (eg. object id
@ -1071,9 +1075,15 @@ typedef struct {
modified. */
/* 20*/ sle64 last_access_time; /* Time this mft record was last
accessed. */
/* 28*/ sle64 allocated_size; /* Byte size of allocated space for the
data attribute. NOTE: Is a multiple
of the cluster size. */
/* 28*/ sle64 allocated_size; /* Byte size of on-disk allocated space
for the data attribute. So for
normal $DATA, this is the
allocated_size from the unnamed
$DATA attribute and for compressed
and/or sparse $DATA, this is the
compressed_size from the unnamed
$DATA attribute. NOTE: This is a
multiple of the cluster size. */
/* 30*/ sle64 data_size; /* Byte size of actual data in data
attribute. */
/* 38*/ FILE_ATTR_FLAGS file_attributes; /* Flags describing the file. */
@ -1904,12 +1914,13 @@ enum {
VOLUME_DELETE_USN_UNDERWAY = const_cpu_to_le16(0x0010),
VOLUME_REPAIR_OBJECT_ID = const_cpu_to_le16(0x0020),
VOLUME_CHKDSK_UNDERWAY = const_cpu_to_le16(0x4000),
VOLUME_MODIFIED_BY_CHKDSK = const_cpu_to_le16(0x8000),
VOLUME_FLAGS_MASK = const_cpu_to_le16(0x803f),
VOLUME_FLAGS_MASK = const_cpu_to_le16(0xc03f),
/* To make our life easier when checking if we must mount read-only. */
VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0x8027),
VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0xc027),
} __attribute__ ((__packed__));
typedef le16 VOLUME_FLAGS;

8
fs/ntfs/mft.c
Просмотреть файл

@ -1,7 +1,7 @@
/**
* mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project.
*
* Copyright (c) 2001-2005 Anton Altaparmakov
* Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@ -473,7 +473,7 @@ int ntfs_sync_mft_mirror(ntfs_volume *vol, const unsigned long mft_no,
runlist_element *rl;
unsigned int block_start, block_end, m_start, m_end, page_ofs;
int i_bhs, nr_bhs, err = 0;
unsigned char blocksize_bits = vol->mftmirr_ino->i_blkbits;
unsigned char blocksize_bits = vol->sb->s_blocksize_bits;
ntfs_debug("Entering for inode 0x%lx.", mft_no);
BUG_ON(!max_bhs);
@ -672,8 +672,8 @@ int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync)
{
ntfs_volume *vol = ni->vol;
struct page *page = ni->page;
unsigned char blocksize_bits = vol->mft_ino->i_blkbits;
unsigned int blocksize = 1 << blocksize_bits;
unsigned int blocksize = vol->sb->s_blocksize;
unsigned char blocksize_bits = vol->sb->s_blocksize_bits;
int max_bhs = vol->mft_record_size / blocksize;
struct buffer_head *bhs[max_bhs];
struct buffer_head *bh, *head;

10
fs/ntfs/ntfs.h
Просмотреть файл

@ -50,11 +50,11 @@ typedef enum {
/* Global variables. */
/* Slab caches (from super.c). */
extern kmem_cache_t *ntfs_name_cache;
extern kmem_cache_t *ntfs_inode_cache;
extern kmem_cache_t *ntfs_big_inode_cache;
extern kmem_cache_t *ntfs_attr_ctx_cache;
extern kmem_cache_t *ntfs_index_ctx_cache;
extern struct kmem_cache *ntfs_name_cache;
extern struct kmem_cache *ntfs_inode_cache;
extern struct kmem_cache *ntfs_big_inode_cache;
extern struct kmem_cache *ntfs_attr_ctx_cache;
extern struct kmem_cache *ntfs_index_ctx_cache;
/* The various operations structs defined throughout the driver files. */
extern struct address_space_operations ntfs_aops;

197
fs/ntfs/super.c
Просмотреть файл

@ -1,7 +1,7 @@
/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
* Copyright (c) 2001-2005 Anton Altaparmakov
* Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@ -22,6 +22,7 @@
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h> /* For bdev_hardsect_size(). */
@ -471,9 +472,16 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
ntfs_error(sb, "Volume is dirty and read-only%s", es);
return -EROFS;
}
if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
ntfs_error(sb, "Volume has been modified by chkdsk "
"and is read-only%s", es);
return -EROFS;
}
if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
ntfs_error(sb, "Volume has unsupported flags set and "
"is read-only%s", es);
ntfs_error(sb, "Volume has unsupported flags set "
"(0x%x) and is read-only%s",
(unsigned)le16_to_cpu(vol->vol_flags),
es);
return -EROFS;
}
if (ntfs_set_volume_flags(vol, VOLUME_IS_DIRTY)) {
@ -641,7 +649,7 @@ static struct buffer_head *read_ntfs_boot_sector(struct super_block *sb,
{
const char *read_err_str = "Unable to read %s boot sector.";
struct buffer_head *bh_primary, *bh_backup;
long nr_blocks = NTFS_SB(sb)->nr_blocks;
sector_t nr_blocks = NTFS_SB(sb)->nr_blocks;
/* Try to read primary boot sector. */
if ((bh_primary = sb_bread(sb, 0))) {
@ -688,13 +696,18 @@ hotfix_primary_boot_sector:
/*
* If we managed to read sector zero and the volume is not
* read-only, copy the found, valid backup boot sector to the
* primary boot sector.
* primary boot sector. Note we only copy the actual boot
* sector structure, not the actual whole device sector as that
* may be bigger and would potentially damage the $Boot system
* file (FIXME: Would be nice to know if the backup boot sector
* on a large sector device contains the whole boot loader or
* just the first 512 bytes).
*/
if (!(sb->s_flags & MS_RDONLY)) {
ntfs_warning(sb, "Hot-fix: Recovering invalid primary "
"boot sector from backup copy.");
memcpy(bh_primary->b_data, bh_backup->b_data,
sb->s_blocksize);
NTFS_BLOCK_SIZE);
mark_buffer_dirty(bh_primary);
sync_dirty_buffer(bh_primary);
if (buffer_uptodate(bh_primary)) {
@ -733,9 +746,13 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b)
vol->sector_size);
ntfs_debug("vol->sector_size_bits = %i (0x%x)", vol->sector_size_bits,
vol->sector_size_bits);
if (vol->sector_size != vol->sb->s_blocksize)
ntfs_warning(vol->sb, "The boot sector indicates a sector size "
"different from the device sector size.");
if (vol->sector_size < vol->sb->s_blocksize) {
ntfs_error(vol->sb, "Sector size (%i) is smaller than the "
"device block size (%lu). This is not "
"supported. Sorry.", vol->sector_size,
vol->sb->s_blocksize);
return FALSE;
}
ntfs_debug("sectors_per_cluster = 0x%x", b->bpb.sectors_per_cluster);
sectors_per_cluster_bits = ffs(b->bpb.sectors_per_cluster) - 1;
ntfs_debug("sectors_per_cluster_bits = 0x%x",
@ -748,16 +765,11 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b)
ntfs_debug("vol->cluster_size = %i (0x%x)", vol->cluster_size,
vol->cluster_size);
ntfs_debug("vol->cluster_size_mask = 0x%x", vol->cluster_size_mask);
ntfs_debug("vol->cluster_size_bits = %i (0x%x)",
vol->cluster_size_bits, vol->cluster_size_bits);
if (vol->sector_size > vol->cluster_size) {
ntfs_error(vol->sb, "Sector sizes above the cluster size are "
"not supported. Sorry.");
return FALSE;
}
if (vol->sb->s_blocksize > vol->cluster_size) {
ntfs_error(vol->sb, "Cluster sizes smaller than the device "
"sector size are not supported. Sorry.");
ntfs_debug("vol->cluster_size_bits = %i", vol->cluster_size_bits);
if (vol->cluster_size < vol->sector_size) {
ntfs_error(vol->sb, "Cluster size (%i) is smaller than the "
"sector size (%i). This is not supported. "
"Sorry.", vol->cluster_size, vol->sector_size);
return FALSE;
}
clusters_per_mft_record = b->clusters_per_mft_record;
@ -786,11 +798,18 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b)
* we store $MFT/$DATA, the table of mft records in the page cache.
*/
if (vol->mft_record_size > PAGE_CACHE_SIZE) {
ntfs_error(vol->sb, "Mft record size %i (0x%x) exceeds the "
"page cache size on your system %lu (0x%lx). "
ntfs_error(vol->sb, "Mft record size (%i) exceeds the "
"PAGE_CACHE_SIZE on your system (%lu). "
"This is not supported. Sorry.",
vol->mft_record_size, vol->mft_record_size,
PAGE_CACHE_SIZE, PAGE_CACHE_SIZE);
vol->mft_record_size, PAGE_CACHE_SIZE);
return FALSE;
}
/* We cannot support mft record sizes below the sector size. */
if (vol->mft_record_size < vol->sector_size) {
ntfs_error(vol->sb, "Mft record size (%i) is smaller than the "
"sector size (%i). This is not supported. "
"Sorry.", vol->mft_record_size,
vol->sector_size);
return FALSE;
}
clusters_per_index_record = b->clusters_per_index_record;
@ -816,6 +835,14 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b)
ntfs_debug("vol->index_record_size_bits = %i (0x%x)",
vol->index_record_size_bits,
vol->index_record_size_bits);
/* We cannot support index record sizes below the sector size. */
if (vol->index_record_size < vol->sector_size) {
ntfs_error(vol->sb, "Index record size (%i) is smaller than "
"the sector size (%i). This is not "
"supported. Sorry.", vol->index_record_size,
vol->sector_size);
return FALSE;
}
/*
* Get the size of the volume in clusters and check for 64-bit-ness.
* Windows currently only uses 32 bits to save the clusters so we do
@ -845,15 +872,18 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b)
}
ll = sle64_to_cpu(b->mft_lcn);
if (ll >= vol->nr_clusters) {
ntfs_error(vol->sb, "MFT LCN is beyond end of volume. Weird.");
ntfs_error(vol->sb, "MFT LCN (%lli, 0x%llx) is beyond end of "
"volume. Weird.", (unsigned long long)ll,
(unsigned long long)ll);
return FALSE;
}
vol->mft_lcn = ll;
ntfs_debug("vol->mft_lcn = 0x%llx", (long long)vol->mft_lcn);
ll = sle64_to_cpu(b->mftmirr_lcn);
if (ll >= vol->nr_clusters) {
ntfs_error(vol->sb, "MFTMirr LCN is beyond end of volume. "
"Weird.");
ntfs_error(vol->sb, "MFTMirr LCN (%lli, 0x%llx) is beyond end "
"of volume. Weird.", (unsigned long long)ll,
(unsigned long long)ll);
return FALSE;
}
vol->mftmirr_lcn = ll;
@ -1822,11 +1852,24 @@ get_ctx_vol_failed:
/* Make sure that no unsupported volume flags are set. */
if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) {
static const char *es1a = "Volume is dirty";
static const char *es1b = "Volume has unsupported flags set";
static const char *es2 = ". Run chkdsk and mount in Windows.";
const char *es1;
es1 = vol->vol_flags & VOLUME_IS_DIRTY ? es1a : es1b;
static const char *es1b = "Volume has been modified by chkdsk";
static const char *es1c = "Volume has unsupported flags set";
static const char *es2a = ". Run chkdsk and mount in Windows.";
static const char *es2b = ". Mount in Windows.";
const char *es1, *es2;
es2 = es2a;
if (vol->vol_flags & VOLUME_IS_DIRTY)
es1 = es1a;
else if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) {
es1 = es1b;
es2 = es2b;
} else {
es1 = es1c;
ntfs_warning(sb, "Unsupported volume flags 0x%x "
"encountered.",
(unsigned)le16_to_cpu(vol->vol_flags));
}
/* If a read-write mount, convert it to a read-only mount. */
if (!(sb->s_flags & MS_RDONLY)) {
if (!(vol->on_errors & (ON_ERRORS_REMOUNT_RO |
@ -2685,7 +2728,7 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent)
ntfs_volume *vol;
struct buffer_head *bh;
struct inode *tmp_ino;
int result;
int blocksize, result;
ntfs_debug("Entering.");
#ifndef NTFS_RW
@ -2724,60 +2767,85 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent)
if (!parse_options(vol, (char*)opt))
goto err_out_now;
/* We support sector sizes up to the PAGE_CACHE_SIZE. */
if (bdev_hardsect_size(sb->s_bdev) > PAGE_CACHE_SIZE) {
if (!silent)
ntfs_error(sb, "Device has unsupported sector size "
"(%i). The maximum supported sector "
"size on this architecture is %lu "
"bytes.",
bdev_hardsect_size(sb->s_bdev),
PAGE_CACHE_SIZE);
goto err_out_now;
}
/*
* TODO: Fail safety check. In the future we should really be able to
* cope with this being the case, but for now just bail out.
* Setup the device access block size to NTFS_BLOCK_SIZE or the hard
* sector size, whichever is bigger.
*/
if (bdev_hardsect_size(sb->s_bdev) > NTFS_BLOCK_SIZE) {
blocksize = sb_min_blocksize(sb, NTFS_BLOCK_SIZE);
if (blocksize < NTFS_BLOCK_SIZE) {
if (!silent)
ntfs_error(sb, "Device has unsupported hardsect_size.");
ntfs_error(sb, "Unable to set device block size.");
goto err_out_now;
}
/* Setup the device access block size to NTFS_BLOCK_SIZE. */
if (sb_set_blocksize(sb, NTFS_BLOCK_SIZE) != NTFS_BLOCK_SIZE) {
BUG_ON(blocksize != sb->s_blocksize);
ntfs_debug("Set device block size to %i bytes (block size bits %i).",
blocksize, sb->s_blocksize_bits);
/* Determine the size of the device in units of block_size bytes. */
if (!i_size_read(sb->s_bdev->bd_inode)) {
if (!silent)
ntfs_error(sb, "Unable to set block size.");
ntfs_error(sb, "Unable to determine device size.");
goto err_out_now;
}
/* Get the size of the device in units of NTFS_BLOCK_SIZE bytes. */
vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
NTFS_BLOCK_SIZE_BITS;
sb->s_blocksize_bits;
/* Read the boot sector and return unlocked buffer head to it. */
if (!(bh = read_ntfs_boot_sector(sb, silent))) {
if (!silent)
ntfs_error(sb, "Not an NTFS volume.");
goto err_out_now;
}
/*
* Extract the data from the boot sector and setup the ntfs super block
* Extract the data from the boot sector and setup the ntfs volume
* using it.
*/
result = parse_ntfs_boot_sector(vol, (NTFS_BOOT_SECTOR*)bh->b_data);
/* Initialize the cluster and mft allocators. */
ntfs_setup_allocators(vol);
brelse(bh);
if (!result) {
if (!silent)
ntfs_error(sb, "Unsupported NTFS filesystem.");
goto err_out_now;
}
/*
* TODO: When we start coping with sector sizes different from
* NTFS_BLOCK_SIZE, we now probably need to set the blocksize of the
* device (probably to NTFS_BLOCK_SIZE).
* If the boot sector indicates a sector size bigger than the current
* device block size, switch the device block size to the sector size.
* TODO: It may be possible to support this case even when the set
* below fails, we would just be breaking up the i/o for each sector
* into multiple blocks for i/o purposes but otherwise it should just
* work. However it is safer to leave disabled until someone hits this
* error message and then we can get them to try it without the setting
* so we know for sure that it works.
*/
if (vol->sector_size > blocksize) {
blocksize = sb_set_blocksize(sb, vol->sector_size);
if (blocksize != vol->sector_size) {
if (!silent)
ntfs_error(sb, "Unable to set device block "
"size to sector size (%i).",
vol->sector_size);
goto err_out_now;
}
BUG_ON(blocksize != sb->s_blocksize);
vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
sb->s_blocksize_bits;
ntfs_debug("Changed device block size to %i bytes (block size "
"bits %i) to match volume sector size.",
blocksize, sb->s_blocksize_bits);
}
/* Initialize the cluster and mft allocators. */
ntfs_setup_allocators(vol);
/* Setup remaining fields in the super block. */
sb->s_magic = NTFS_SB_MAGIC;
/*
* Ntfs allows 63 bits for the file size, i.e. correct would be:
* sb->s_maxbytes = ~0ULL >> 1;
@ -2787,9 +2855,8 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent)
* without overflowing the index or to 2^63 - 1, whichever is smaller.
*/
sb->s_maxbytes = MAX_LFS_FILESIZE;
/* Ntfs measures time in 100ns intervals. */
sb->s_time_gran = 100;
/*
* Now load the metadata required for the page cache and our address
* space operations to function. We do this by setting up a specialised
@ -2987,14 +3054,14 @@ err_out_now:
* strings of the maximum length allowed by NTFS, which is NTFS_MAX_NAME_LEN
* (255) Unicode characters + a terminating NULL Unicode character.
*/
kmem_cache_t *ntfs_name_cache;
struct kmem_cache *ntfs_name_cache;
/* Slab caches for efficient allocation/deallocation of inodes. */
kmem_cache_t *ntfs_inode_cache;
kmem_cache_t *ntfs_big_inode_cache;
struct kmem_cache *ntfs_inode_cache;
struct kmem_cache *ntfs_big_inode_cache;
/* Init once constructor for the inode slab cache. */
static void ntfs_big_inode_init_once(void *foo, kmem_cache_t *cachep,
static void ntfs_big_inode_init_once(void *foo, struct kmem_cache *cachep,
unsigned long flags)
{
ntfs_inode *ni = (ntfs_inode *)foo;
@ -3008,8 +3075,8 @@ static void ntfs_big_inode_init_once(void *foo, kmem_cache_t *cachep,
* Slab caches to optimize allocations and deallocations of attribute search
* contexts and index contexts, respectively.
*/
kmem_cache_t *ntfs_attr_ctx_cache;
kmem_cache_t *ntfs_index_ctx_cache;
struct kmem_cache *ntfs_attr_ctx_cache;
struct kmem_cache *ntfs_index_ctx_cache;
/* Driver wide semaphore. */
DECLARE_MUTEX(ntfs_lock);

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше