[PATCH] sundance: remove if (1) { ... } block in sundance_probe1

Remove an if (1) { ... } block in sundance_probe1.  Its purpose seems
to be only to allow for delaring some extra local variables.  But, it also
adds ugly indentation without adding any meaning to the code.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/net/sundance.c

@@ -518,6 +518,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 #else
 	int bar = 1;
 #endif
+	int phy, phy_idx = 0;
 
 
 /* when built into the kernel, we only print version if device is found */
@@ -606,32 +607,29 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 			printk("%2.2x:", dev->dev_addr[i]);
 	printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
 
-	if (1) {
-		int phy, phy_idx = 0;
-		np->phys[0] = 1;		/* Default setting */
-		np->mii_preamble_required++;
-		for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
-			int mii_status = mdio_read(dev, phy, MII_BMSR);
-			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
-				np->phys[phy_idx++] = phy;
-				np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
-				if ((mii_status & 0x0040) == 0)
-					np->mii_preamble_required++;
-				printk(KERN_INFO "%s: MII PHY found at address %d, status "
-					   "0x%4.4x advertising %4.4x.\n",
-					   dev->name, phy, mii_status, np->mii_if.advertising);
-			}
+	np->phys[0] = 1;		/* Default setting */
+	np->mii_preamble_required++;
+	for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+		int mii_status = mdio_read(dev, phy, MII_BMSR);
+		if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+			np->phys[phy_idx++] = phy;
+			np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+			if ((mii_status & 0x0040) == 0)
+				np->mii_preamble_required++;
+			printk(KERN_INFO "%s: MII PHY found at address %d, status "
+				   "0x%4.4x advertising %4.4x.\n",
+				   dev->name, phy, mii_status, np->mii_if.advertising);
 		}
-		np->mii_preamble_required--;
-
-		if (phy_idx == 0) {
-			printk(KERN_INFO "%s: No MII transceiver found, aborting.  ASIC status %x\n",
-				   dev->name, ioread32(ioaddr + ASICCtrl));
-			goto err_out_unregister;
-		}
-
-		np->mii_if.phy_id = np->phys[0];
 	}
+	np->mii_preamble_required--;
+
+	if (phy_idx == 0) {
+		printk(KERN_INFO "%s: No MII transceiver found, aborting.  ASIC status %x\n",
+			   dev->name, ioread32(ioaddr + ASICCtrl));
+		goto err_out_unregister;
+	}
+
+	np->mii_if.phy_id = np->phys[0];
 
 	/* Parse override configuration */
 	np->an_enable = 1;