[media] atmel-isc: Set the default DMA memory burst size

Sometimes 'DMA single access' is not enough to transfer
a frame of image, '8-beat burst access' is set as the
default DMA memory burst size.

Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Songjun Wu 2017-04-20 05:51:30 -03:00 коммит произвёл Mauro Carvalho Chehab
Родитель 4e0973a918
Коммит 682559d9d5
1 изменённых файлов: 12 добавлений и 11 удалений

Просмотреть файл

@ -239,13 +239,11 @@ static struct isc_format isc_formats[] = {
{ V4L2_PIX_FMT_YUV420, 0x0, 12,
ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
ISC_DCFG_IMODE_YC420P | ISC_DCFG_YMBSIZE_BEATS8 |
ISC_DCFG_CMBSIZE_BEATS8, ISC_DCTRL_DVIEW_PLANAR, 0x7fb,
ISC_DCFG_IMODE_YC420P, ISC_DCTRL_DVIEW_PLANAR, 0x7fb,
false, false },
{ V4L2_PIX_FMT_YUV422P, 0x0, 16,
ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
ISC_DCFG_IMODE_YC422P | ISC_DCFG_YMBSIZE_BEATS8 |
ISC_DCFG_CMBSIZE_BEATS8, ISC_DCTRL_DVIEW_PLANAR, 0x3fb,
ISC_DCFG_IMODE_YC422P, ISC_DCTRL_DVIEW_PLANAR, 0x3fb,
false, false },
{ V4L2_PIX_FMT_RGB565, MEDIA_BUS_FMT_RGB565_2X8_LE, 16,
ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_RGB565,
@ -700,8 +698,10 @@ static void isc_set_histogram(struct isc_device *isc)
}
static inline void isc_get_param(const struct isc_format *fmt,
u32 *rlp_mode, u32 *dcfg_imode)
u32 *rlp_mode, u32 *dcfg)
{
*dcfg = ISC_DCFG_YMBSIZE_BEATS8;
switch (fmt->fourcc) {
case V4L2_PIX_FMT_SBGGR10:
case V4L2_PIX_FMT_SGBRG10:
@ -712,11 +712,11 @@ static inline void isc_get_param(const struct isc_format *fmt,
case V4L2_PIX_FMT_SGRBG12:
case V4L2_PIX_FMT_SRGGB12:
*rlp_mode = fmt->reg_rlp_mode;
*dcfg_imode = fmt->reg_dcfg_imode;
*dcfg |= fmt->reg_dcfg_imode;
break;
default:
*rlp_mode = ISC_RLP_CFG_MODE_DAT8;
*dcfg_imode = ISC_DCFG_IMODE_PACKED8;
*dcfg |= ISC_DCFG_IMODE_PACKED8;
break;
}
}
@ -726,18 +726,19 @@ static int isc_configure(struct isc_device *isc)
struct regmap *regmap = isc->regmap;
const struct isc_format *current_fmt = isc->current_fmt;
struct isc_subdev_entity *subdev = isc->current_subdev;
u32 pfe_cfg0, rlp_mode, dcfg_imode, mask, pipeline;
u32 pfe_cfg0, rlp_mode, dcfg, mask, pipeline;
if (sensor_is_preferred(current_fmt)) {
pfe_cfg0 = current_fmt->reg_bps;
pipeline = 0x0;
isc_get_param(current_fmt, &rlp_mode, &dcfg_imode);
isc_get_param(current_fmt, &rlp_mode, &dcfg);
isc->ctrls.hist_stat = HIST_INIT;
} else {
pfe_cfg0 = isc->raw_fmt->reg_bps;
pipeline = current_fmt->pipeline;
rlp_mode = current_fmt->reg_rlp_mode;
dcfg_imode = current_fmt->reg_dcfg_imode;
dcfg = current_fmt->reg_dcfg_imode | ISC_DCFG_YMBSIZE_BEATS8 |
ISC_DCFG_CMBSIZE_BEATS8;
}
pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
@ -750,7 +751,7 @@ static int isc_configure(struct isc_device *isc)
regmap_update_bits(regmap, ISC_RLP_CFG, ISC_RLP_CFG_MODE_MASK,
rlp_mode);
regmap_update_bits(regmap, ISC_DCFG, ISC_DCFG_IMODE_MASK, dcfg_imode);
regmap_write(regmap, ISC_DCFG, dcfg);
/* Set the pipeline */
isc_set_pipeline(isc, pipeline);