microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

EtherExpress16: fix printing timed out status 

in drivers/net/eexpress.c:558, function unstick_cu()

while (!SCB_complete(rsst=scb_status(dev))) {
	...
	if (...)
		printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
                                                       dev->name,rsst);
}

but this will become 

while (!((rsst = scb_status(dev) & 0x8000) != 0) ...

because of the macro:

#define SCB_complete(s) ((s&0x8000)!=0)

so rsst can only become either 0x8000 or 0, but in the latter case the
loop ends, I think the wrong timed out status is printed. This also
cleans up similar macros.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Roel Kluin 2008-12-29 18:42:33 -08:00 коммит произвёл David S. Miller
Родитель 18cc42a3a1
Коммит 684f4a4c4a
1 изменённых файлов: 28 добавлений и 28 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

56
drivers/net/eexpress.h
Просмотреть файл

@ -68,17 +68,17 @@
*/
/* these functions take the SCB status word and test the relevant status bit */
#define SCB_complete(s) ((s&0x8000)!=0)
#define SCB_rxdframe(s) ((s&0x4000)!=0)
#define SCB_CUdead(s) ((s&0x2000)!=0)
#define SCB_RUdead(s) ((s&0x1000)!=0)
#define SCB_ack(s) (s & 0xf000)
#define SCB_complete(s) (((s) & 0x8000) != 0)
#define SCB_rxdframe(s) (((s) & 0x4000) != 0)
#define SCB_CUdead(s) (((s) & 0x2000) != 0)
#define SCB_RUdead(s) (((s) & 0x1000) != 0)
#define SCB_ack(s) ((s) & 0xf000)
/* Command unit status: 0=idle, 1=suspended, 2=active */
#define SCB_CUstat(s) ((s&0x0300)>>8)
#define SCB_CUstat(s) (((s)&0x0300)>>8)
/* Receive unit status: 0=idle, 1=suspended, 2=out of resources, 4=ready */
#define SCB_RUstat(s) ((s&0x0070)>>4)
#define SCB_RUstat(s) (((s)&0x0070)>>4)
/* SCB commands */
#define SCB_CUnop 0x0000
@ -98,18 +98,18 @@
* Command block defines
*/
#define Stat_Done(s) ((s&0x8000)!=0)
#define Stat_Busy(s) ((s&0x4000)!=0)
#define Stat_OK(s) ((s&0x2000)!=0)
#define Stat_Abort(s) ((s&0x1000)!=0)
#define Stat_STFail ((s&0x0800)!=0)
#define Stat_TNoCar(s) ((s&0x0400)!=0)
#define Stat_TNoCTS(s) ((s&0x0200)!=0)
#define Stat_TNoDMA(s) ((s&0x0100)!=0)
#define Stat_TDefer(s) ((s&0x0080)!=0)
#define Stat_TColl(s) ((s&0x0040)!=0)
#define Stat_TXColl(s) ((s&0x0020)!=0)
#define Stat_NoColl(s) (s&0x000f)
#define Stat_Done(s) (((s) & 0x8000) != 0)
#define Stat_Busy(s) (((s) & 0x4000) != 0)
#define Stat_OK(s) (((s) & 0x2000) != 0)
#define Stat_Abort(s) (((s) & 0x1000) != 0)
#define Stat_STFail (((s) & 0x0800) != 0)
#define Stat_TNoCar(s) (((s) & 0x0400) != 0)
#define Stat_TNoCTS(s) (((s) & 0x0200) != 0)
#define Stat_TNoDMA(s) (((s) & 0x0100) != 0)
#define Stat_TDefer(s) (((s) & 0x0080) != 0)
#define Stat_TColl(s) (((s) & 0x0040) != 0)
#define Stat_TXColl(s) (((s) & 0x0020) != 0)
#define Stat_NoColl(s) ((s) & 0x000f)
/* Cmd_END will end AFTER the command if this is the first
* command block after an SCB_CUstart, but BEFORE the command
@ -136,16 +136,16 @@
* Frame Descriptor (Receive block) defines
*/
#define FD_Done(s) ((s&0x8000)!=0)
#define FD_Busy(s) ((s&0x4000)!=0)
#define FD_OK(s) ((s&0x2000)!=0)
#define FD_Done(s) (((s) & 0x8000) != 0)
#define FD_Busy(s) (((s) & 0x4000) != 0)
#define FD_OK(s) (((s) & 0x2000) != 0)
#define FD_CRC(s) ((s&0x0800)!=0)
#define FD_Align(s) ((s&0x0400)!=0)
#define FD_Resrc(s) ((s&0x0200)!=0)
#define FD_DMA(s) ((s&0x0100)!=0)
#define FD_Short(s) ((s&0x0080)!=0)
#define FD_NoEOF(s) ((s&0x0040)!=0)
#define FD_CRC(s) (((s) & 0x0800) != 0)
#define FD_Align(s) (((s) & 0x0400) != 0)
#define FD_Resrc(s) (((s) & 0x0200) != 0)
#define FD_DMA(s) (((s) & 0x0100) != 0)
#define FD_Short(s) (((s) & 0x0080) != 0)
#define FD_NoEOF(s) (((s) & 0x0040) != 0)
struct rfd_header {
volatile unsigned long flags;