microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform) 

Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two).
They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There
also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500
and no developers have obtained it so far (to my knowledge).

The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.

Downstream workaround:
2e7a9ee1c9

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210616002321.74155-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Konrad Dybcio 2021-06-16 02:23:21 +02:00 коммит произвёл Bjorn Andersson
Родитель 759488004f
Коммит 69cdb97ef6
4 изменённых файлов: 566 добавлений и 0 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
arch/arm64/boot/dts/qcom/Makefile
Просмотреть файл

@ -81,5 +81,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb

15
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts Normal file
Просмотреть файл

@ -0,0 +1,15 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
/dts-v1/;
#include "sm8250-sony-xperia-edo.dtsi"
/ {
model = "Sony Xperia 1 II";
compatible = "sony,pdx203-generic", "qcom,sm8250";
};
/delete-node/ &vreg_l7f_1p8;

24
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts Normal file
Просмотреть файл

@ -0,0 +1,24 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
/dts-v1/;
#include "sm8250-sony-xperia-edo.dtsi"
/ {
model = "Sony Xperia 5 II";
compatible = "sony,pdx206-generic", "qcom,sm8250";
};
&framebuffer {
width = <1080>;
height = <2520>;
stride = <(1080 * 4)>;
};
&vreg_l2f_1p3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};

525
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi Normal file
Просмотреть файл

@ -0,0 +1,525 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
#include "pm8150l.dtsi"
#include "pm8009.dtsi"
/delete-node/ &adsp_mem;
/delete-node/ &spss_mem;
/delete-node/ &cdsp_secure_heap;
/ {
qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
qcom,board-id = <0x10008 0>;
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer: framebuffer@9c000000 {
compatible = "simple-framebuffer";
reg = <0 0x9c000000 0 0x2300000>;
width = <1644>;
height = <3840>;
stride = <(1644 * 4)>;
format = "a8r8g8b8";
/*
* That's a lot of clocks, but it's necessary due
* to unused clk cleanup & no panel driver yet..
*/
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>;
power-domains = <&dispcc MDSS_GDSC>;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
vreg_s6c_0p88: smpc6-regulator {
compatible = "regulator-fixed";
regulator-name = "vreg_s6c_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-always-on;
vin-supply = <&vph_pwr>;
};
reserved-memory {
adsp_mem: memory@8a100000 {
reg = <0x0 0x8a100000 0x0 0x2500000>;
no-map;
};
spss_mem: memory@8c600000 {
reg = <0x0 0x8c600000 0x0 0x100000>;
no-map;
};
cdsp_secure_heap: memory@8c700000 {
reg = <0x0 0x8c700000 0x0 0x4600000>;
no-map;
};
cont_splash_mem: memory@9c000000 {
reg = <0x0 0x9c000000 0x0 0x2300000>;
no-map;
};
ramoops@ffc00000 {
compatible = "ramoops";
reg = <0x0 0xffc00000 0x0 0x100000>;
record-size = <0x1000>;
console-size = <0x40000>;
msg-size = <0x20000 0x20000>;
ecc-size = <16>;
no-map;
};
};
};
&apps_rsc {
pm8150-rpmh-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
vdd-l2-l10-supply = <&vreg_bob>;
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
vdd-l6-l9-supply = <&vreg_s8c_1p2>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
vdd-l13-l16-l17-supply = <&vreg_bob>;
/* (S1+S2+S3) - cx.lvl (ARC) */
vreg_s4a_1p8: smps4 {
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5a_1p9: smps5 {
regulator-name = "vreg_s5a_1p9";
regulator-min-microvolt = <1824000>;
regulator-max-microvolt = <2040000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6a_0p6: smps6 {
regulator-name = "vreg_s6a_0p6";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2a_3p1: ldo2 {
regulator-name = "vreg_l2a_3p1";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a_0p9: ldo3 {
regulator-name = "vreg_l3a_0p9";
regulator-min-microvolt = <928000>;
regulator-max-microvolt = <932000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L4 - lmx.lvl (ARC) */
vreg_l5a_0p88: ldo5 {
regulator-name = "vreg_l5a_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6a_1p2: ldo6 {
regulator-name = "vreg_l6a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L7 is unused. */
vreg_l9a_1p2: ldo9 {
regulator-name = "vreg_l9a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L10 is unused, L11 - lcx.lvl (ARC) */
vreg_l12a_1p8: ldo12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L13 is unused. */
vreg_l14a_1p8: ldo14 {
regulator-name = "vreg_l14a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L15 & L16 are unused. */
vreg_l17a_3p0: ldo17 {
regulator-name = "vreg_l17a_3p0";
regulator-min-microvolt = <2496000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18a_0p9: ldo18 {
regulator-name = "vreg_l18a_0p9";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
/*
* Remaining regulators that are not yet supported:
* OLEDB: 4925000-8100000
* ab: 4600000-6100000
* ibb: 800000-5400000
*/
pm8150l-rpmh-regulators {
compatible = "qcom,pm8150l-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
vdd-l2-l3-supply = <&vreg_s8c_1p2>;
vdd-l4-l5-l6-supply = <&vreg_bob>;
vdd-l7-l11-supply = <&vreg_bob>;
vdd-l9-l10-supply = <&vreg_bob>;
vdd-bob-supply = <&vph_pwr>;
vreg_bob: bob {
regulator-name = "vreg_bob";
regulator-min-microvolt = <3350000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
/*
* S1-S6 are ARCs:
* (S1+S2) - gfx.lvl,
* S3 - mx.lvl,
* (S4+S5) - mmcx.lvl,
* S6 - ebi.lvl
*/
vreg_s7c_0p35: smps7 {
regulator-name = "vreg_s7c_0p35";
regulator-min-microvolt = <348000>;
regulator-max-microvolt = <1000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s8c_1p2: smps8 {
regulator-name = "vreg_s8c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1400000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p8: ldo1 {
regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L2-4 are unused. */
vreg_l5c_1p8: ldo5 {
regulator-name = "vreg_l5c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_2p9: ldo6 {
regulator-name = "vreg_l6c_2p9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7c_2p85: ldo7 {
regulator-name = "vreg_l7c_2p85";
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-name = "vreg_l8c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p9: ldo9 {
regulator-name = "vreg_l9c_2p9";
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l10c_3p3: ldo10 {
regulator-name = "vreg_l10c_3p3";
regulator-min-microvolt = <3296000>;
regulator-max-microvolt = <3296000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_3p0: ldo11 {
regulator-name = "vreg_l11c_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
pm8009-rpmh-regulators {
compatible = "qcom,pm8009-rpmh-regulators";
qcom,pmic-id = "f";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vreg_bob>;
vdd-l2-supply = <&vreg_s8c_1p2>;
vdd-l5-l6-supply = <&vreg_bob>;
vdd-l7-supply = <&vreg_s4a_1p8>;
vreg_s1f_1p2: smps1 {
regulator-name = "vreg_s1f_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s2f_0p5: smps2 {
regulator-name = "vreg_s2f_0p5";
regulator-min-microvolt = <512000>;
regulator-max-microvolt = <1100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L1 is unused. */
vreg_l2f_1p3: ldo2 {
regulator-name = "vreg_l2f_1p3";
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* L3 & L4 are unused. */
vreg_l5f_2p8: ldo5 {
regulator-name = "vreg_l5f_2p85";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6f_2p8: ldo6 {
regulator-name = "vreg_l6f_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7f_1p8: ldo7 {
regulator-name = "vreg_l7f_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
/* NXP PN553 NFC @ 28 */
};
&i2c2 {
status = "okay";
clock-frequency = <1000000>;
/* Dual Cirrus Logic CS35L41 amps @ 40, 41 */
};
&i2c5 {
status = "okay";
clock-frequency = <400000>;
/* Dialog SLG51000 CMIC @ 75 */
};
&i2c9 {
status = "okay";
clock-frequency = <400000>;
/* AMS TCS3490 RGB+IR color sensor @ 72 */
};
&i2c13 {
status = "okay";
clock-frequency = <400000>;
/* Samsung touchscreen @ 48 */
};
&i2c15 {
status = "okay";
clock-frequency = <400000>;
/* Qcom SMB1390 @ 10 */
/* Silicon Labs SI4704 FM Radio Receiver @ 11 */
/* Qcom SMB1390_slave @ 18 */
/* HALO HL6111R Qi charger @ 25 */
/* Richwave RTC6226 FM Radio Receiver @ 64 */
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&qupv3_id_2 {
status = "okay";
};
&sdhc_2 {
status = "okay";
cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default", "sleep";
pinctrl-1 = <&sdc2_default_state &sdc2_card_det_n>;
pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
vmmc-supply = <&vreg_l9c_2p9>;
vqmmc-supply = <&vreg_l6c_2p9>;
bus-width = <4>;
no-sdio;
no-emmc;
};
&tlmm {
gpio-reserved-ranges = <40 4>, <52 4>;
sdc2_default_state: sdc2-default {
clk {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
cmd {
pins = "sdc2_cmd";
drive-strength = <16>;
bias-pull-up;
};
data {
pins = "sdc2_data";
drive-strength = <16>;
bias-pull-up;
};
};
sdc2_card_det_n: sd-card-det-n {
pins = "gpio77";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
};
&uart12 {
status = "okay";
};
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
&ufs_mem_hc { status = "disabled"; };
&ufs_mem_phy { status = "disabled"; };
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l5a_0p88>;
vdda18-supply = <&vreg_l12a_1p8>;
vdda33-supply = <&vreg_l2a_3p1>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p9>;
};