HID: semitek: new driver for GK6X series keyboards

A number of USB keyboards, using the Semitek firmware, are capable of
handling arbitrary N-key rollover, but due to a buggy report
descriptor, keys beyond the sixth cannot be detected by the generic
HID driver.

There are numerous hardware variants sold by several vendors, mostly
using generic names like "GK61" for the 61-key version.  These
keyboards are sometimes known collectively as the "GK6X" series.

The keyboard has three USB interfaces.  Interface 0 uses the standard
HID boot protocol, limited to eight modifier keys and six normal keys;
interface 2 uses a custom report format that permits any number of
keys.  If more than six keys are pressed simultaneously, the first six
are reported via interface 0 while subsequent keys are reported via
interface 2.

(Interface 1 uses a custom protocol for reprogramming the keyboard;
this can be controlled through userspace tools and is not of concern
for the present driver.)

The report descriptor for interface 2, however, is incorrect (for
report ID 0x04, the input field is marked as "array" rather than
"variable".)  The descriptor appears to be correct in other respects,
so we simply replace the incorrect byte before parsing the descriptor.

Signed-off-by: Benjamin Moody <bmoody@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/Kconfig

@@ -922,6 +922,21 @@ config HID_SAMSUNG
 	help
 	Support for Samsung InfraRed remote control or keyboards.
 
+config HID_SEMITEK
+	tristate "Semitek USB keyboards"
+	depends on HID
+	help
+	Support for Semitek USB keyboards that are not fully compliant
+	with the HID standard.
+
+	There are many variants, including:
+	- GK61, GK64, GK68, GK84, GK96, etc.
+	- SK61, SK64, SK68, SK84, SK96, etc.
+	- Dierya DK61/DK66
+	- Tronsmart TK09R
+	- Woo-dy
+	- X-Bows Nature/Knight
+
 config HID_SONY
 	tristate "Sony PS2/3/4 accessories"
 	depends on USB_HID

drivers/hid/Makefile

@@ -106,6 +106,7 @@ obj-$(CONFIG_HID_ROCCAT)	+= hid-roccat.o hid-roccat-common.o \
 obj-$(CONFIG_HID_RMI)		+= hid-rmi.o
 obj-$(CONFIG_HID_SAITEK)	+= hid-saitek.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
+obj-$(CONFIG_HID_SEMITEK)	+= hid-semitek.o
 obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
 obj-$(CONFIG_HID_SPEEDLINK)	+= hid-speedlink.o

drivers/hid/hid-ids.h

@@ -1060,6 +1060,9 @@
 #define USB_DEVICE_ID_SEMICO_USB_KEYKOARD	0x0023
 #define USB_DEVICE_ID_SEMICO_USB_KEYKOARD2	0x0027
 
+#define USB_VENDOR_ID_SEMITEK	0x1ea7
+#define USB_DEVICE_ID_SEMITEK_KEYBOARD	0x0907
+
 #define USB_VENDOR_ID_SENNHEISER	0x1395
 #define USB_DEVICE_ID_SENNHEISER_BTD500USB	0x002c
 

drivers/hid/hid-semitek.c

@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  HID driver for Semitek keyboards
+ *
+ *  Copyright (c) 2021 Benjamin Moody
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static __u8 *semitek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+                                  unsigned int *rsize)
+{
+	/* In the report descriptor for interface 2, fix the incorrect
+	   description of report ID 0x04 (the report contains a
+	   bitmask, not an array of keycodes.) */
+	if (*rsize == 0xcb && rdesc[0x83] == 0x81 && rdesc[0x84] == 0x00) {
+		hid_info(hdev, "fixing up Semitek report descriptor\n");
+		rdesc[0x84] = 0x02;
+	}
+	return rdesc;
+}
+
+static const struct hid_device_id semitek_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SEMITEK, USB_DEVICE_ID_SEMITEK_KEYBOARD) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, semitek_devices);
+
+static struct hid_driver semitek_driver = {
+	.name = "semitek",
+	.id_table = semitek_devices,
+	.report_fixup = semitek_report_fixup,
+};
+module_hid_driver(semitek_driver);
+
+MODULE_LICENSE("GPL");