microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

gma500: Add support for Cedarview 

Again this is similar but has some differences so we have a set of plug in
support. This does make the driver bigger than is needed in some respects
but the tradeoff for maintainability is huge.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit is contained in:
Alan Cox 2011-11-03 18:22:37 +00:00 коммит произвёл Dave Airlie
Родитель 1b082ccf59
Коммит 6a227d5fd6
6 изменённых файлов: 3318 добавлений и 0 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

351
drivers/gpu/drm/gma500/cdv_device.c Normal file
Просмотреть файл

@ -0,0 +1,351 @@
/**************************************************************************
* Copyright (c) 2011, Intel Corporation.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
**************************************************************************/
#include <linux/backlight.h>
#include <drm/drmP.h>
#include <drm/drm.h>
#include "psb_drm.h"
#include "psb_drv.h"
#include "psb_reg.h"
#include "psb_intel_reg.h"
#include "intel_bios.h"
#include "cdv_device.h"
#define VGA_SR_INDEX 0x3c4
#define VGA_SR_DATA 0x3c5
/* FIXME: should check if we are the active VGA device ?? */
static void cdv_disable_vga(struct drm_device *dev)
{
u8 sr1;
u32 vga_reg;
vga_reg = VGACNTRL;
outb(1, VGA_SR_INDEX);
sr1 = inb(VGA_SR_DATA);
outb(sr1 | 1<<5, VGA_SR_DATA);
udelay(300);
REG_WRITE(vga_reg, VGA_DISP_DISABLE);
REG_READ(vga_reg);
}
static int cdv_output_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
cdv_disable_vga(dev);
cdv_intel_crt_init(dev, &dev_priv->mode_dev);
cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
/* These bits indicate HDMI not SDVO on CDV, but we don't yet support
the HDMI interface */
if (REG_READ(SDVOB) & SDVO_DETECTED)
cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
if (REG_READ(SDVOC) & SDVO_DETECTED)
cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
return 0;
}
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
/*
* Poulsbo Backlight Interfaces
*/
#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
#define BLC_PWM_FREQ_CALC_CONSTANT 32
#define MHz 1000000
#define PSB_BLC_PWM_PRECISION_FACTOR 10
#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE
#define PSB_BLC_MIN_PWM_REG_FREQ 0x2
#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
static int cdv_brightness;
static struct backlight_device *cdv_backlight_device;
static int cdv_get_brightness(struct backlight_device *bd)
{
/* return locally cached var instead of HW read (due to DPST etc.) */
/* FIXME: ideally return actual value in case firmware fiddled with
it */
return cdv_brightness;
}
static int cdv_backlight_setup(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
unsigned long core_clock;
/* u32 bl_max_freq; */
/* unsigned long value; */
u16 bl_max_freq;
uint32_t value;
uint32_t blc_pwm_precision_factor;
/* get bl_max_freq and pol from dev_priv*/
if (!dev_priv->lvds_bl) {
dev_err(dev->dev, "Has no valid LVDS backlight info\n");
return -ENOENT;
}
bl_max_freq = dev_priv->lvds_bl->freq;
blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
core_clock = dev_priv->core_freq;
value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
value *= blc_pwm_precision_factor;
value /= bl_max_freq;
value /= blc_pwm_precision_factor;
if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
return -ERANGE;
else {
/* FIXME */
}
return 0;
}
static int cdv_set_brightness(struct backlight_device *bd)
{
int level = bd->props.brightness;
/* Percentage 1-100% being valid */
if (level < 1)
level = 1;
/*cdv_intel_lvds_set_brightness(dev, level); FIXME */
cdv_brightness = level;
return 0;
}
static const struct backlight_ops cdv_ops = {
.get_brightness = cdv_get_brightness,
.update_status = cdv_set_brightness,
};
static int cdv_backlight_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
int ret;
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 100;
props.type = BACKLIGHT_PLATFORM;
cdv_backlight_device = backlight_device_register("psb-bl",
NULL, (void *)dev, &cdv_ops, &props);
if (IS_ERR(cdv_backlight_device))
return PTR_ERR(cdv_backlight_device);
ret = cdv_backlight_setup(dev);
if (ret < 0) {
backlight_device_unregister(cdv_backlight_device);
cdv_backlight_device = NULL;
return ret;
}
cdv_backlight_device->props.brightness = 100;
cdv_backlight_device->props.max_brightness = 100;
backlight_update_status(cdv_backlight_device);
dev_priv->backlight_device = cdv_backlight_device;
return 0;
}
#endif
/*
* Provide the Cedarview specific chip logic and low level methods
* for power management
*
* FIXME: we need to implement the apm/ospm base management bits
* for this and the MID devices.
*/
static inline u32 CDV_MSG_READ32(uint port, uint offset)
{
int mcr = (0x10<<24) | (port << 16) | (offset << 8);
uint32_t ret_val = 0;
struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
pci_write_config_dword(pci_root, 0xD0, mcr);
pci_read_config_dword(pci_root, 0xD4, &ret_val);
pci_dev_put(pci_root);
return ret_val;
}
static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
{
int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
pci_write_config_dword(pci_root, 0xD4, value);
pci_write_config_dword(pci_root, 0xD0, mcr);
pci_dev_put(pci_root);
}
#define PSB_APM_CMD 0x0
#define PSB_APM_STS 0x04
#define PSB_PM_SSC 0x20
#define PSB_PM_SSS 0x30
#define PSB_PWRGT_GFX_MASK 0x3
#define CDV_PWRGT_DISPLAY_CNTR 0x000fc00c
#define CDV_PWRGT_DISPLAY_STS 0x000fc00c
static void cdv_init_pm(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pwr_cnt;
int i;
dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
PSB_APMBA) & 0xFFFF;
dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
PSB_OSPMBA) & 0xFFFF;
/* Force power on for now */
pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
for (i = 0; i < 5; i++) {
u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
break;
udelay(10);
}
pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
for (i = 0; i < 5; i++) {
u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
break;
udelay(10);
}
}
/**
* cdv_save_display_registers - save registers lost on suspend
* @dev: our DRM device
*
* Save the state we need in order to be able to restore the interface
* upon resume from suspend
*
* FIXME: review
*/
static int cdv_save_display_registers(struct drm_device *dev)
{
return 0;
}
/**
* cdv_restore_display_registers - restore lost register state
* @dev: our DRM device
*
* Restore register state that was lost during suspend and resume.
*
* FIXME: review
*/
static int cdv_restore_display_registers(struct drm_device *dev)
{
return 0;
}
static int cdv_power_down(struct drm_device *dev)
{
return 0;
}
static int cdv_power_up(struct drm_device *dev)
{
return 0;
}
/* FIXME ? - shared with Poulsbo */
static void cdv_get_core_freq(struct drm_device *dev)
{
uint32_t clock;
struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
struct drm_psb_private *dev_priv = dev->dev_private;
pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
pci_read_config_dword(pci_root, 0xD4, &clock);
pci_dev_put(pci_root);
switch (clock & 0x07) {
case 0:
dev_priv->core_freq = 100;
break;
case 1:
dev_priv->core_freq = 133;
break;
case 2:
dev_priv->core_freq = 150;
break;
case 3:
dev_priv->core_freq = 178;
break;
case 4:
dev_priv->core_freq = 200;
break;
case 5:
case 6:
case 7:
dev_priv->core_freq = 266;
default:
dev_priv->core_freq = 0;
}
}
static int cdv_chip_setup(struct drm_device *dev)
{
cdv_get_core_freq(dev);
gma_intel_opregion_init(dev);
psb_intel_init_bios(dev);
return 0;
}
/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
const struct psb_ops cdv_chip_ops = {
.name = "Cedartrail",
.accel_2d = 0,
.pipes = 2,
.sgx_offset = MRST_SGX_OFFSET,
.chip_setup = cdv_chip_setup,
.crtc_helper = &cdv_intel_helper_funcs,
.crtc_funcs = &cdv_intel_crtc_funcs,
.output_init = cdv_output_init,
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
.backlight_init = cdv_backlight_init,
#endif
.init_pm = cdv_init_pm,
.save_regs = cdv_save_display_registers,
.restore_regs = cdv_restore_display_registers,
.power_down = cdv_power_down,
.power_up = cdv_power_up,
};

36
drivers/gpu/drm/gma500/cdv_device.h Normal file
Просмотреть файл

@ -0,0 +1,36 @@
/*
* Copyright © 2011 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs;
extern const struct drm_crtc_funcs cdv_intel_crtc_funcs;
extern void cdv_intel_crt_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev);
extern void cdv_intel_lvds_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev);
extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev,
int reg);
extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc);
extern inline void cdv_intel_wait_for_vblank(struct drm_device *dev)
{
/* Wait for 20ms, i.e. one cycle at 50hz. */
/* FIXME: msleep ?? */
mdelay(20);
}

326
drivers/gpu/drm/gma500/cdv_intel_crt.c Normal file
Просмотреть файл

@ -0,0 +1,326 @@
/*
* Copyright © 2006-2007 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
#include <drm/drmP.h>
#include "intel_bios.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "power.h"
#include <linux/pm_runtime.h>
static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
u32 temp, reg;
reg = ADPA;
temp = REG_READ(reg);
temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
temp &= ~ADPA_DAC_ENABLE;
switch (mode) {
case DRM_MODE_DPMS_ON:
temp |= ADPA_DAC_ENABLE;
break;
case DRM_MODE_DPMS_STANDBY:
temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
break;
case DRM_MODE_DPMS_SUSPEND:
temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
break;
case DRM_MODE_DPMS_OFF:
temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
break;
}
REG_WRITE(reg, temp);
}
static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
int max_clock = 0;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
/* The lowest clock for CDV is 20000KHz */
if (mode->clock < 20000)
return MODE_CLOCK_LOW;
/* The max clock for CDV is 355 instead of 400 */
max_clock = 355000;
if (mode->clock > max_clock)
return MODE_CLOCK_HIGH;
if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
return MODE_PANEL;
return MODE_OK;
}
static bool cdv_intel_crt_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
return true;
}
static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_crtc *crtc = encoder->crtc;
struct psb_intel_crtc *psb_intel_crtc =
to_psb_intel_crtc(crtc);
int dpll_md_reg;
u32 adpa, dpll_md;
u32 adpa_reg;
if (psb_intel_crtc->pipe == 0)
dpll_md_reg = DPLL_A_MD;
else
dpll_md_reg = DPLL_B_MD;
adpa_reg = ADPA;
/*
* Disable separate mode multiplier used when cloning SDVO to CRT
* XXX this needs to be adjusted when we really are cloning
*/
{
dpll_md = REG_READ(dpll_md_reg);
REG_WRITE(dpll_md_reg,
dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
}
adpa = 0;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
adpa |= ADPA_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
adpa |= ADPA_VSYNC_ACTIVE_HIGH;
if (psb_intel_crtc->pipe == 0)
adpa |= ADPA_PIPE_A_SELECT;
else
adpa |= ADPA_PIPE_B_SELECT;
REG_WRITE(adpa_reg, adpa);
}
/**
* Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
*
* \return true if CRT is connected.
* \return false if CRT is disconnected.
*/
static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
bool force)
{
struct drm_device *dev = connector->dev;
u32 hotplug_en;
int i, tries = 0, ret = false;
u32 adpa_orig;
/* disable the DAC when doing the hotplug detection */
adpa_orig = REG_READ(ADPA);
REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
/*
* On a CDV thep, CRT detect sequence need to be done twice
* to get a reliable result.
*/
tries = 2;
hotplug_en = REG_READ(PORT_HOTPLUG_EN);
hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
for (i = 0; i < tries ; i++) {
unsigned long timeout;
/* turn on the FORCE_DETECT */
REG_WRITE(PORT_HOTPLUG_EN, hotplug_en);
timeout = jiffies + msecs_to_jiffies(1000);
/* wait for FORCE_DETECT to go off */
do {
if (!(REG_READ(PORT_HOTPLUG_EN) &
CRT_HOTPLUG_FORCE_DETECT))
break;
msleep(1);
} while (time_after(timeout, jiffies));
}
if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
CRT_HOTPLUG_MONITOR_NONE)
ret = true;
/* Restore the saved ADPA */
REG_WRITE(ADPA, adpa_orig);
return ret;
}
static enum drm_connector_status cdv_intel_crt_detect(
struct drm_connector *connector, bool force)
{
if (cdv_intel_crt_detect_hotplug(connector, force))
return connector_status_connected;
else
return connector_status_disconnected;
}
static void cdv_intel_crt_destroy(struct drm_connector *connector)
{
struct psb_intel_output *intel_output = to_psb_intel_output(connector);
psb_intel_i2c_destroy(intel_output->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
static int cdv_intel_crt_get_modes(struct drm_connector *connector)
{
struct psb_intel_output *intel_output =
to_psb_intel_output(connector);
return psb_intel_ddc_get_modes(intel_output);
}
static int cdv_intel_crt_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
return 0;
}
/*
* Routines for controlling stuff on the analog port
*/
static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = {
.dpms = cdv_intel_crt_dpms,
.mode_fixup = cdv_intel_crt_mode_fixup,
.prepare = psb_intel_encoder_prepare,
.commit = psb_intel_encoder_commit,
.mode_set = cdv_intel_crt_mode_set,
};
static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.detect = cdv_intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = cdv_intel_crt_destroy,
.set_property = cdv_intel_crt_set_property,
};
static const struct drm_connector_helper_funcs
cdv_intel_crt_connector_helper_funcs = {
.mode_valid = cdv_intel_crt_mode_valid,
.get_modes = cdv_intel_crt_get_modes,
.best_encoder = psb_intel_best_encoder,
};
static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = {
.destroy = cdv_intel_crt_enc_destroy,
};
void cdv_intel_crt_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev)
{
struct psb_intel_output *psb_intel_output;
struct drm_connector *connector;
struct drm_encoder *encoder;
u32 i2c_reg;
psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
if (!psb_intel_output)
return;
psb_intel_output->mode_dev = mode_dev;
connector = &psb_intel_output->base;
drm_connector_init(dev, connector,
&cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
encoder = &psb_intel_output->enc;
drm_encoder_init(dev, encoder,
&cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
drm_mode_connector_attach_encoder(&psb_intel_output->base,
&psb_intel_output->enc);
/* Set up the DDC bus. */
i2c_reg = GPIOA;
/* Remove the following code for CDV */
/*
if (dev_priv->crt_ddc_bus != 0)
i2c_reg = dev_priv->crt_ddc_bus;
}*/
psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
i2c_reg, "CRTDDC_A");
if (!psb_intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
goto failed_ddc;
}
psb_intel_output->type = INTEL_OUTPUT_ANALOG;
/*
psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
*/
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
drm_connector_helper_add(connector,
&cdv_intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
return;
failed_ddc:
drm_encoder_cleanup(&psb_intel_output->enc);
drm_connector_cleanup(&psb_intel_output->base);
kfree(psb_intel_output);
return;
}

1508
drivers/gpu/drm/gma500/cdv_intel_display.c Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

376
drivers/gpu/drm/gma500/cdv_intel_hdmi.c Normal file
Просмотреть файл

@ -0,0 +1,376 @@
/*
* Copyright © 2006-2011 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* jim liu <jim.liu@intel.com>
*
* FIXME:
* We should probably make this generic and share it with Medfield
*/
#include <drm/drmP.h>
#include <drm/drm.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include "psb_intel_drv.h"
#include "psb_drv.h"
#include "psb_intel_reg.h"
#include <linux/pm_runtime.h>
/* hdmi control bits */
#define HDMI_NULL_PACKETS_DURING_VSYNC (1 << 9)
#define HDMI_BORDER_ENABLE (1 << 7)
#define HDMI_AUDIO_ENABLE (1 << 6)
#define HDMI_VSYNC_ACTIVE_HIGH (1 << 4)
#define HDMI_HSYNC_ACTIVE_HIGH (1 << 3)
/* hdmi-b control bits */
#define HDMIB_PIPE_B_SELECT (1 << 30)
struct mid_intel_hdmi_priv {
u32 hdmi_reg;
u32 save_HDMIB;
bool has_hdmi_sink;
bool has_hdmi_audio;
/* Should set this when detect hotplug */
bool hdmi_device_connected;
struct mdfld_hdmi_i2c *i2c_bus;
struct i2c_adapter *hdmi_i2c_adapter; /* for control functions */
struct drm_device *dev;
};
static void cdv_hdmi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
u32 hdmib;
struct drm_crtc *crtc = encoder->crtc;
struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc);
hdmib = (2 << 10);
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
hdmib |= HDMI_VSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
hdmib |= HDMI_HSYNC_ACTIVE_HIGH;
if (intel_crtc->pipe == 1)
hdmib |= HDMIB_PIPE_B_SELECT;
if (hdmi_priv->has_hdmi_audio) {
hdmib |= HDMI_AUDIO_ENABLE;
hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC;
}
REG_WRITE(hdmi_priv->hdmi_reg, hdmib);
REG_READ(hdmi_priv->hdmi_reg);
}
static bool cdv_hdmi_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
return true;
}
static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
u32 hdmib;
hdmib = REG_READ(hdmi_priv->hdmi_reg);
if (mode != DRM_MODE_DPMS_ON)
REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN);
else
REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN);
REG_READ(hdmi_priv->hdmi_reg);
}
static void cdv_hdmi_save(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct psb_intel_output *output = to_psb_intel_output(connector);
struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
hdmi_priv->save_HDMIB = REG_READ(hdmi_priv->hdmi_reg);
}
static void cdv_hdmi_restore(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct psb_intel_output *output = to_psb_intel_output(connector);
struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
REG_WRITE(hdmi_priv->hdmi_reg, hdmi_priv->save_HDMIB);
REG_READ(hdmi_priv->hdmi_reg);
}
static enum drm_connector_status cdv_hdmi_detect(
struct drm_connector *connector, bool force)
{
struct psb_intel_output *psb_intel_output =
to_psb_intel_output(connector);
struct mid_intel_hdmi_priv *hdmi_priv = psb_intel_output->dev_priv;
struct edid *edid = NULL;
enum drm_connector_status status = connector_status_disconnected;
edid = drm_get_edid(&psb_intel_output->base,
psb_intel_output->hdmi_i2c_adapter);
hdmi_priv->has_hdmi_sink = false;
hdmi_priv->has_hdmi_audio = false;
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
hdmi_priv->has_hdmi_sink =
drm_detect_hdmi_monitor(edid);
hdmi_priv->has_hdmi_audio =
drm_detect_monitor_audio(edid);
}
psb_intel_output->base.display_info.raw_edid = NULL;
kfree(edid);
}
return status;
}
static int cdv_hdmi_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
struct drm_encoder *encoder = connector->encoder;
if (!strcmp(property->name, "scaling mode") && encoder) {
struct psb_intel_crtc *crtc = to_psb_intel_crtc(encoder->crtc);
bool centre;
uint64_t curValue;
if (!crtc)
return -1;
switch (value) {
case DRM_MODE_SCALE_FULLSCREEN:
break;
case DRM_MODE_SCALE_NO_SCALE:
break;
case DRM_MODE_SCALE_ASPECT:
break;
default:
return -1;
}
if (drm_connector_property_get_value(connector,
property, &curValue))
return -1;
if (curValue == value)
return 0;
if (drm_connector_property_set_value(connector,
property, value))
return -1;
centre = (curValue == DRM_MODE_SCALE_NO_SCALE) ||
(value == DRM_MODE_SCALE_NO_SCALE);
if (crtc->saved_mode.hdisplay != 0 &&
crtc->saved_mode.vdisplay != 0) {
if (centre) {
if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode,
encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb))
return -1;
} else {
struct drm_encoder_helper_funcs *helpers
= encoder->helper_private;
helpers->mode_set(encoder, &crtc->saved_mode,
&crtc->saved_adjusted_mode);
}
}
}
return 0;
}
/*
* Return the list of HDMI DDC modes if available.
*/
static int cdv_hdmi_get_modes(struct drm_connector *connector)
{
struct psb_intel_output *psb_intel_output =
to_psb_intel_output(connector);
struct edid *edid = NULL;
int ret = 0;
edid = drm_get_edid(&psb_intel_output->base,
psb_intel_output->hdmi_i2c_adapter);
if (edid) {
drm_mode_connector_update_edid_property(&psb_intel_output->
base, edid);
ret = drm_add_edid_modes(&psb_intel_output->base, edid);
kfree(edid);
}
return ret;
}
static int cdv_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
if (mode->clock > 165000)
return MODE_CLOCK_HIGH;
if (mode->clock < 20000)
return MODE_CLOCK_HIGH;
/* just in case */
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
/* just in case */
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
return MODE_NO_INTERLACE;
/*
* FIXME: for now we limit the size to 1680x1050 on CDV, otherwise it
* will go beyond the stolen memory size allocated to the framebuffer
*/
if (mode->hdisplay > 1680)
return MODE_PANEL;
if (mode->vdisplay > 1050)
return MODE_PANEL;
return MODE_OK;
}
static void cdv_hdmi_destroy(struct drm_connector *connector)
{
struct psb_intel_output *psb_intel_output =
to_psb_intel_output(connector);
if (psb_intel_output->ddc_bus)
psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = {
.dpms = cdv_hdmi_dpms,
.mode_fixup = cdv_hdmi_mode_fixup,
.prepare = psb_intel_encoder_prepare,
.mode_set = cdv_hdmi_mode_set,
.commit = psb_intel_encoder_commit,
};
static const struct drm_connector_helper_funcs
cdv_hdmi_connector_helper_funcs = {
.get_modes = cdv_hdmi_get_modes,
.mode_valid = cdv_hdmi_mode_valid,
.best_encoder = psb_intel_best_encoder,
};
static const struct drm_connector_funcs cdv_hdmi_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.save = cdv_hdmi_save,
.restore = cdv_hdmi_restore,
.detect = cdv_hdmi_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = cdv_hdmi_set_property,
.destroy = cdv_hdmi_destroy,
};
void cdv_hdmi_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev, int reg)
{
struct psb_intel_output *psb_intel_output;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct mid_intel_hdmi_priv *hdmi_priv;
int ddc_bus;
psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
sizeof(struct mid_intel_hdmi_priv), GFP_KERNEL);
if (!psb_intel_output)
return;
hdmi_priv = (struct mid_intel_hdmi_priv *)(psb_intel_output + 1);
psb_intel_output->mode_dev = mode_dev;
connector = &psb_intel_output->base;
encoder = &psb_intel_output->enc;
drm_connector_init(dev, &psb_intel_output->base,
&cdv_hdmi_connector_funcs,
DRM_MODE_CONNECTOR_DVID);
drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
DRM_MODE_ENCODER_TMDS);
drm_mode_connector_attach_encoder(&psb_intel_output->base,
&psb_intel_output->enc);
psb_intel_output->type = INTEL_OUTPUT_HDMI;
hdmi_priv->hdmi_reg = reg;
hdmi_priv->has_hdmi_sink = false;
psb_intel_output->dev_priv = hdmi_priv;
drm_encoder_helper_add(encoder, &cdv_hdmi_helper_funcs);
drm_connector_helper_add(connector,
&cdv_hdmi_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
drm_connector_attach_property(connector,
dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
switch (reg) {
case SDVOB:
ddc_bus = GPIOE;
break;
case SDVOC:
ddc_bus = GPIOD;
break;
default:
DRM_ERROR("unknown reg 0x%x for HDMI\n", reg);
goto failed_ddc;
break;
}
psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
ddc_bus, (reg == SDVOB) ? "HDMIB" : "HDMIC");
if (!psb_intel_output->ddc_bus) {
dev_err(dev->dev, "No ddc adapter available!\n");
goto failed_ddc;
}
psb_intel_output->hdmi_i2c_adapter =
&(psb_intel_output->ddc_bus->adapter);
hdmi_priv->dev = dev;
drm_sysfs_connector_add(connector);
return;
failed_ddc:
drm_encoder_cleanup(&psb_intel_output->enc);
drm_connector_cleanup(&psb_intel_output->base);
kfree(psb_intel_output);
}

721
drivers/gpu/drm/gma500/cdv_intel_lvds.c Normal file
Просмотреть файл

@ -0,0 +1,721 @@
/*
* Copyright © 2006-2011 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/i2c.h>
#include <linux/dmi.h>
#include <drm/drmP.h>
#include "intel_bios.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "power.h"
#include <linux/pm_runtime.h>
#include "cdv_device.h"
/**
* LVDS I2C backlight control macros
*/
#define BRIGHTNESS_MAX_LEVEL 100
#define BRIGHTNESS_MASK 0xFF
#define BLC_I2C_TYPE 0x01
#define BLC_PWM_TYPT 0x02
#define BLC_POLARITY_NORMAL 0
#define BLC_POLARITY_INVERSE 1
#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE)
#define PSB_BLC_MIN_PWM_REG_FREQ (0x2)
#define PSB_BLC_PWM_PRECISION_FACTOR (10)
#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
struct cdv_intel_lvds_priv {
/**
* Saved LVDO output states
*/
uint32_t savePP_ON;
uint32_t savePP_OFF;
uint32_t saveLVDS;
uint32_t savePP_CONTROL;
uint32_t savePP_CYCLE;
uint32_t savePFIT_CONTROL;
uint32_t savePFIT_PGM_RATIOS;
uint32_t saveBLC_PWM_CTL;
};
/*
* Returns the maximum level of the backlight duty cycle field.
*/
static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 retval;
if (gma_power_begin(dev, false)) {
retval = ((REG_READ(BLC_PWM_CTL) &
BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
gma_power_end(dev);
} else
retval = ((dev_priv->saveBLC_PWM_CTL &
BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
return retval;
}
/*
* Set LVDS backlight level by I2C command
*/
static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
unsigned int level)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
u8 out_buf[2];
unsigned int blc_i2c_brightness;
struct i2c_msg msgs[] = {
{
.addr = lvds_i2c_bus->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
}
};
blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
BRIGHTNESS_MASK /
BRIGHTNESS_MAX_LEVEL);
if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
out_buf[1] = (u8)blc_i2c_brightness;
if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
return 0;
DRM_ERROR("I2C transfer error\n");
return -1;
}
static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 max_pwm_blc;
u32 blc_pwm_duty_cycle;
max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
/*BLC_PWM_CTL Should be initiated while backlight device init*/
BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
REG_WRITE(BLC_PWM_CTL,
(max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
(blc_pwm_duty_cycle));
return 0;
}
/*
* Set LVDS backlight level either by I2C or PWM
*/
void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
{
struct drm_psb_private *dev_priv = dev->dev_private;
if (!dev_priv->lvds_bl) {
DRM_ERROR("NO LVDS Backlight Info\n");
return;
}
if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
cdv_lvds_i2c_set_brightness(dev, level);
else
cdv_lvds_pwm_set_brightness(dev, level);
}
/**
* Sets the backlight level.
*
* level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
*/
static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 blc_pwm_ctl;
if (gma_power_begin(dev, false)) {
blc_pwm_ctl =
REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
REG_WRITE(BLC_PWM_CTL,
(blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
gma_power_end(dev);
} else {
blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
~BACKLIGHT_DUTY_CYCLE_MASK;
dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
}
}
/**
* Sets the power state for the panel.
*/
static void cdv_intel_lvds_set_power(struct drm_device *dev,
struct psb_intel_output *output, bool on)
{
u32 pp_status;
if (!gma_power_begin(dev, true))
return;
if (on) {
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while ((pp_status & PP_ON) == 0);
cdv_intel_lvds_set_backlight(dev,
output->
mode_dev->backlight_duty_cycle);
} else {
cdv_intel_lvds_set_backlight(dev, 0);
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
~POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while (pp_status & PP_ON);
}
gma_power_end(dev);
}
static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
if (mode == DRM_MODE_DPMS_ON)
cdv_intel_lvds_set_power(dev, output, true);
else
cdv_intel_lvds_set_power(dev, output, false);
/* XXX: We never power down the LVDS pairs. */
}
static void cdv_intel_lvds_save(struct drm_connector *connector)
{
}
static void cdv_intel_lvds_restore(struct drm_connector *connector)
{
}
int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct psb_intel_output *psb_intel_output =
to_psb_intel_output(connector);
struct drm_display_mode *fixed_mode =
psb_intel_output->mode_dev->panel_fixed_mode;
/* just in case */
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
/* just in case */
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
return MODE_NO_INTERLACE;
if (fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
}
return MODE_OK;
}
bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct psb_intel_mode_device *mode_dev =
enc_to_psb_intel_output(encoder)->mode_dev;
struct drm_device *dev = encoder->dev;
struct drm_encoder *tmp_encoder;
struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
head) {
if (tmp_encoder != encoder
&& tmp_encoder->crtc == encoder->crtc) {
printk(KERN_ERR "Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
* with the panel scaling set up to source from the H/VDisplay
* of the original mode.
*/
if (panel_fixed_mode != NULL) {
adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
adjusted_mode->htotal = panel_fixed_mode->htotal;
adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
adjusted_mode->vtotal = panel_fixed_mode->vtotal;
adjusted_mode->clock = panel_fixed_mode->clock;
drm_mode_set_crtcinfo(adjusted_mode,
CRTC_INTERLACE_HALVE_V);
}
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
* user's requested refresh rate.
*/
return true;
}
static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
struct psb_intel_mode_device *mode_dev = output->mode_dev;
if (!gma_power_begin(dev, true))
return;
mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
cdv_intel_lvds_set_power(dev, output, false);
gma_power_end(dev);
}
static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
struct psb_intel_mode_device *mode_dev = output->mode_dev;
if (mode_dev->backlight_duty_cycle == 0)
mode_dev->backlight_duty_cycle =
cdv_intel_lvds_get_max_backlight(dev);
cdv_intel_lvds_set_power(dev, output, true);
}
static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pfit_control;
/*
* The LVDS pin pair will already have been turned on in the
* cdv_intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
/*
* Enable automatic panel scaling so that non-native modes fill the
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
if (mode->hdisplay != adjusted_mode->hdisplay ||
mode->vdisplay != adjusted_mode->vdisplay)
pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
else
pfit_control = 0;
if (dev_priv->lvds_dither)
pfit_control |= PANEL_8TO6_DITHER_ENABLE;
REG_WRITE(PFIT_CONTROL, pfit_control);
}
/**
* Detect the LVDS connection.
*
* This always returns CONNECTOR_STATUS_CONNECTED.
* This connector should only have
* been set up if the LVDS was actually connected anyway.
*/
static enum drm_connector_status cdv_intel_lvds_detect(
struct drm_connector *connector, bool force)
{
return connector_status_connected;
}
/**
* Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
*/
static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct psb_intel_output *psb_intel_output =
to_psb_intel_output(connector);
struct psb_intel_mode_device *mode_dev =
psb_intel_output->mode_dev;
int ret;
ret = psb_intel_ddc_get_modes(psb_intel_output);
if (ret)
return ret;
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes
* handed to valid_mode for checking
*/
connector->display_info.min_vfreq = 0;
connector->display_info.max_vfreq = 200;
connector->display_info.min_hfreq = 0;
connector->display_info.max_hfreq = 200;
if (mode_dev->panel_fixed_mode != NULL) {
struct drm_display_mode *mode =
drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
drm_mode_probed_add(connector, mode);
return 1;
}
return 0;
}
/**
* cdv_intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
*
* Unregister the DDC bus for this connector then free the driver private
* structure.
*/
void cdv_intel_lvds_destroy(struct drm_connector *connector)
{
struct psb_intel_output *psb_intel_output =
to_psb_intel_output(connector);
if (psb_intel_output->ddc_bus)
psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
int cdv_intel_lvds_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
struct drm_encoder *encoder = connector->encoder;
if (!strcmp(property->name, "scaling mode") && encoder) {
struct psb_intel_crtc *crtc =
to_psb_intel_crtc(encoder->crtc);
uint64_t curValue;
if (!crtc)
return -1;
switch (value) {
case DRM_MODE_SCALE_FULLSCREEN:
break;
case DRM_MODE_SCALE_NO_SCALE:
break;
case DRM_MODE_SCALE_ASPECT:
break;
default:
return -1;
}
if (drm_connector_property_get_value(connector,
property,
&curValue))
return -1;
if (curValue == value)
return 0;
if (drm_connector_property_set_value(connector,
property,
value))
return -1;
if (crtc->saved_mode.hdisplay != 0 &&
crtc->saved_mode.vdisplay != 0) {
if (!drm_crtc_helper_set_mode(encoder->crtc,
&crtc->saved_mode,
encoder->crtc->x,
encoder->crtc->y,
encoder->crtc->fb))
return -1;
}
} else if (!strcmp(property->name, "backlight") && encoder) {
if (drm_connector_property_set_value(connector,
property,
value))
return -1;
else {
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
struct drm_psb_private *dev_priv =
encoder->dev->dev_private;
struct backlight_device *bd =
dev_priv->backlight_device;
bd->props.brightness = value;
backlight_update_status(bd);
#endif
}
} else if (!strcmp(property->name, "DPMS") && encoder) {
struct drm_encoder_helper_funcs *helpers =
encoder->helper_private;
helpers->dpms(encoder, value);
}
return 0;
}
static const struct drm_encoder_helper_funcs
cdv_intel_lvds_helper_funcs = {
.dpms = cdv_intel_lvds_encoder_dpms,
.mode_fixup = cdv_intel_lvds_mode_fixup,
.prepare = cdv_intel_lvds_prepare,
.mode_set = cdv_intel_lvds_mode_set,
.commit = cdv_intel_lvds_commit,
};
static const struct drm_connector_helper_funcs
cdv_intel_lvds_connector_helper_funcs = {
.get_modes = cdv_intel_lvds_get_modes,
.mode_valid = cdv_intel_lvds_mode_valid,
.best_encoder = psb_intel_best_encoder,
};
static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.save = cdv_intel_lvds_save,
.restore = cdv_intel_lvds_restore,
.detect = cdv_intel_lvds_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = cdv_intel_lvds_set_property,
.destroy = cdv_intel_lvds_destroy,
};
static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
.destroy = cdv_intel_lvds_enc_destroy,
};
/**
* cdv_intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
*
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
void cdv_intel_lvds_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev)
{
struct psb_intel_output *psb_intel_output;
struct cdv_intel_lvds_priv *lvds_priv;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_display_mode *scan;
struct drm_crtc *crtc;
struct drm_psb_private *dev_priv = dev->dev_private;
u32 lvds;
int pipe;
psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
if (!psb_intel_output)
return;
lvds_priv = (struct cdv_intel_lvds_priv *)(psb_intel_output + 1);
psb_intel_output->dev_priv = lvds_priv;
psb_intel_output->mode_dev = mode_dev;
connector = &psb_intel_output->base;
encoder = &psb_intel_output->enc;
drm_connector_init(dev, &psb_intel_output->base,
&cdv_intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_encoder_init(dev, &psb_intel_output->enc,
&cdv_intel_lvds_enc_funcs,
DRM_MODE_ENCODER_LVDS);
drm_mode_connector_attach_encoder(&psb_intel_output->base,
&psb_intel_output->enc);
psb_intel_output->type = INTEL_OUTPUT_LVDS;
drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
drm_connector_helper_add(connector,
&cdv_intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
/*Attach connector properties*/
drm_connector_attach_property(connector,
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
drm_connector_attach_property(connector,
dev_priv->backlight_property,
BRIGHTNESS_MAX_LEVEL);
/**
* Set up I2C bus
* FIXME: distroy i2c_bus when exit
*/
psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
GPIOB,
"LVDSBLC_B");
if (!psb_intel_output->i2c_bus) {
dev_printk(KERN_ERR,
&dev->pdev->dev, "I2C bus registration failed.\n");
goto failed_blc_i2c;
}
psb_intel_output->i2c_bus->slave_addr = 0x2C;
dev_priv->lvds_i2c_bus = psb_intel_output->i2c_bus;
/*
* LVDS discovery:
* 1) check for EDID on DDC
* 2) check for VBT data
* 3) check to see if LVDS is already on
* if none of the above, no panel
* 4) make sure lid is open
* if closed, act like it's not there for now
*/
/* Set up the DDC bus. */
psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
GPIOC,
"LVDSDDC_C");
if (!psb_intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev,
"DDC bus registration " "failed.\n");
goto failed_ddc;
}
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
psb_intel_ddc_get_modes(psb_intel_output);
list_for_each_entry(scan, &connector->probed_modes, head) {
if (scan->type & DRM_MODE_TYPE_PREFERRED) {
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
goto out; /* FIXME: check for quirks */
}
}
/* Failed to get EDID, what about VBT? do we need this?*/
if (dev_priv->lfp_lvds_vbt_mode) {
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
if (mode_dev->panel_fixed_mode) {
mode_dev->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
goto out; /* FIXME: check for quirks */
}
}
/*
* If we didn't get EDID, try checking if the panel is already turned
* on. If so, assume that whatever is currently programmed is the
* correct mode.
*/
lvds = REG_READ(LVDS);
pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
if (crtc && (lvds & LVDS_PORT_EN)) {
mode_dev->panel_fixed_mode =
cdv_intel_crtc_mode_get(dev, crtc);
if (mode_dev->panel_fixed_mode) {
mode_dev->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
goto out; /* FIXME: check for quirks */
}
}
/* If we still don't have a mode after all that, give up. */
if (!mode_dev->panel_fixed_mode) {
DRM_DEBUG
("Found no modes on the lvds, ignoring the LVDS\n");
goto failed_find;
}
out:
drm_sysfs_connector_add(connector);
return;
failed_find:
printk(KERN_ERR "Failed find\n");
if (psb_intel_output->ddc_bus)
psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
failed_ddc:
printk(KERN_ERR "Failed DDC\n");
if (psb_intel_output->i2c_bus)
psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
failed_blc_i2c:
printk(KERN_ERR "Failed BLC\n");
drm_encoder_cleanup(encoder);
drm_connector_cleanup(connector);
kfree(connector);
}