microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge 3.6-rc6 into staging-next 

This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the
merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2012-09-16 17:17:25 -07:00
Родитель 8e360ec823 5698bd757d
Коммит 6a2a2cdd57
716 изменённых файлов: 5981 добавлений и 3426 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

12
Documentation/ABI/testing/sysfs-bus-pci
Просмотреть файл

@ -210,3 +210,15 @@ Users:
firmware assigned instance number of the PCI
device that can help in understanding the firmware
intended order of the PCI device.
What: /sys/bus/pci/devices/.../d3cold_allowed
Date: July 2012
Contact: Huang Ying <ying.huang@intel.com>
Description:
d3cold_allowed is bit to control whether the corresponding PCI
device can be put into D3Cold state. If it is cleared, the
device will never be put into D3Cold state. If it is set, the
device may be put into D3Cold state if other requirements are
satisfied too. Reading this attribute will show the current
value of d3cold_allowed bit. Writing this attribute will set
the value of d3cold_allowed bit.

10
Documentation/block/00-INDEX
Просмотреть файл

@ -3,15 +3,21 @@
biodoc.txt
- Notes on the Generic Block Layer Rewrite in Linux 2.5
capability.txt
- Generic Block Device Capability (/sys/block/<disk>/capability)
- Generic Block Device Capability (/sys/block/<device>/capability)
cfq-iosched.txt
- CFQ IO scheduler tunables
data-integrity.txt
- Block data integrity
deadline-iosched.txt
- Deadline IO scheduler tunables
ioprio.txt
- Block io priorities (in CFQ scheduler)
queue-sysfs.txt
- Queue's sysfs entries
request.txt
- The members of struct request (in include/linux/blkdev.h)
stat.txt
- Block layer statistics in /sys/block/<dev>/stat
- Block layer statistics in /sys/block/<device>/stat
switching-sched.txt
- Switching I/O schedulers at runtime
writeback_cache_control.txt

77
Documentation/block/cfq-iosched.txt
Просмотреть файл

@ -1,3 +1,14 @@
CFQ (Complete Fairness Queueing)
===============================
The main aim of CFQ scheduler is to provide a fair allocation of the disk
I/O bandwidth for all the processes which requests an I/O operation.
CFQ maintains the per process queue for the processes which request I/O
operation(syncronous requests). In case of asynchronous requests, all the
requests from all the processes are batched together according to their
process's I/O priority.
CFQ ioscheduler tunables
========================
@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID
controller or for storage arrays), setting slice_idle=0 might end up in better
throughput and acceptable latencies.
back_seek_max
-------------
This specifies, given in Kbytes, the maximum "distance" for backward seeking.
The distance is the amount of space from the current head location to the
sectors that are backward in terms of distance.
This parameter allows the scheduler to anticipate requests in the "backward"
direction and consider them as being the "next" if they are within this
distance from the current head location.
back_seek_penalty
-----------------
This parameter is used to compute the cost of backward seeking. If the
backward distance of request is just 1/back_seek_penalty from a "front"
request, then the seeking cost of two requests is considered equivalent.
So scheduler will not bias toward one or the other request (otherwise scheduler
will bias toward front request). Default value of back_seek_penalty is 2.
fifo_expire_async
-----------------
This parameter is used to set the timeout of asynchronous requests. Default
value of this is 248ms.
fifo_expire_sync
----------------
This parameter is used to set the timeout of synchronous requests. Default
value of this is 124ms. In case to favor synchronous requests over asynchronous
one, this value should be decreased relative to fifo_expire_async.
slice_async
-----------
This parameter is same as of slice_sync but for asynchronous queue. The
default value is 40ms.
slice_async_rq
--------------
This parameter is used to limit the dispatching of asynchronous request to
device request queue in queue's slice time. The maximum number of request that
are allowed to be dispatched also depends upon the io priority. Default value
for this is 2.
slice_sync
----------
When a queue is selected for execution, the queues IO requests are only
executed for a certain amount of time(time_slice) before switching to another
queue. This parameter is used to calculate the time slice of synchronous
queue.
time_slice is computed using the below equation:-
time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the
time_slice of synchronous queue, increase the value of slice_sync. Default
value is 100ms.
quantum
-------
This specifies the number of request dispatched to the device queue. In a
queue's time slice, a request will not be dispatched if the number of request
in the device exceeds this parameter. This parameter is used for synchronous
request.
In case of storage with several disk, this setting can limit the parallel
processing of request. Therefore, increasing the value can imporve the
performace although this can cause the latency of some I/O to increase due
to more number of requests.
CFQ IOPS Mode for group scheduling
===================================
Basic CFQ design is to provide priority based time slices. Higher priority

64
Documentation/block/queue-sysfs.txt
Просмотреть файл

@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory.
Files denoted with a RO postfix are readonly and the RW postfix means
read-write.
add_random (RW)
----------------
This file allows to trun off the disk entropy contribution. Default
value of this file is '1'(on).
discard_granularity (RO)
-----------------------
This shows the size of internal allocation of the device in bytes, if
reported by the device. A value of '0' means device does not support
the discard functionality.
discard_max_bytes (RO)
----------------------
Devices that support discard functionality may have internal limits on
the number of bytes that can be trimmed or unmapped in a single operation.
The discard_max_bytes parameter is set by the device driver to the maximum
number of bytes that can be discarded in a single operation. Discard
requests issued to the device must not exceed this limit. A discard_max_bytes
value of 0 means that the device does not support discard functionality.
discard_zeroes_data (RO)
------------------------
When read, this file will show if the discarded block are zeroed by the
device or not. If its value is '1' the blocks are zeroed otherwise not.
hw_sector_size (RO)
-------------------
This is the hardware sector size of the device, in bytes.
iostats (RW)
-------------
This file is used to control (on/off) the iostats accounting of the
disk.
logical_block_size (RO)
-----------------------
This is the logcal block size of the device, in bytes.
max_hw_sectors_kb (RO)
----------------------
This is the maximum number of kilobytes supported in a single data transfer.
max_integrity_segments (RO)
---------------------------
When read, this file shows the max limit of integrity segments as
set by block layer which a hardware controller can handle.
max_sectors_kb (RW)
-------------------
This is the maximum number of kilobytes that the block layer will allow
for a filesystem request. Must be smaller than or equal to the maximum
size allowed by the hardware.
max_segments (RO)
-----------------
Maximum number of segments of the device.
max_segment_size (RO)
---------------------
Maximum segment size of the device.
minimum_io_size (RO)
--------------------
This is the smallest preferred io size reported by the device.
nomerges (RW)
-------------
This enables the user to disable the lookup logic involved with IO
@ -45,11 +96,24 @@ per-block-cgroup request pool. IOW, if there are N block cgroups,
each request queue may have upto N request pools, each independently
regulated by nr_requests.
optimal_io_size (RO)
--------------------
This is the optimal io size reported by the device.
physical_block_size (RO)
------------------------
This is the physical block size of device, in bytes.
read_ahead_kb (RW)
------------------
Maximum number of kilobytes to read-ahead for filesystems on this block
device.
rotational (RW)
---------------
This file is used to stat if the device is of rotational type or
non-rotational type.
rq_affinity (RW)
----------------
If this option is '1', the block layer will migrate request completions to the

8
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
Просмотреть файл

@ -10,8 +10,8 @@ Required properties:
- compatible : Should be "fsl,<chip>-esdhc"
Optional properties:
- fsl,cd-internal : Indicate to use controller internal card detection
- fsl,wp-internal : Indicate to use controller internal write protection
- fsl,cd-controller : Indicate to use controller internal card detection
- fsl,wp-controller : Indicate to use controller internal write protection
Examples:
@ -19,8 +19,8 @@ esdhc@70004000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
fsl,cd-internal;
fsl,wp-internal;
fsl,cd-controller;
fsl,wp-controller;
};
esdhc@70008000 {

2
Documentation/feature-removal-schedule.txt
Просмотреть файл

@ -579,7 +579,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more
----------------------------
What: at91-mci driver ("CONFIG_MMC_AT91")
When: 3.7
When: 3.8
Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support
was added to atmel-mci as a first step to support more chips.
Then at91-mci was kept only for old IP versions (on at91rm9200 and

1
Documentation/i2c/busses/i2c-i801
Просмотреть файл

@ -21,6 +21,7 @@ Supported adapters:
* Intel DH89xxCC (PCH)
* Intel Panther Point (PCH)
* Intel Lynx Point (PCH)
* Intel Lynx Point-LP (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller

2
Documentation/watchdog/src/watchdog-test.c
Просмотреть файл

@ -31,7 +31,7 @@ static void keep_alive(void)
* or "-e" to enable the card.
*/
void term(int sig)
static void term(int sig)
{
close(fd);
fprintf(stderr, "Stopping watchdog ticks...\n");

2
MAINTAINERS
Просмотреть файл

@ -3388,7 +3388,7 @@ M: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
T: git git://git.fluff.org/bjdooks/linux.git
T: git git://git.pengutronix.de/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 6
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

3
arch/arm/Kconfig
Просмотреть файл

@ -6,7 +6,7 @@ config ARM
select HAVE_DMA_API_DEBUG
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig"
config CPU_FREQ_IMX
tristate "CPUfreq driver for i.MX CPUs"
depends on ARCH_MXC && CPU_FREQ
select CPU_FREQ_TABLE
help
This enables the CPUfreq driver for i.MX CPUs.

6
arch/arm/Kconfig.debug
Просмотреть файл

@ -356,15 +356,15 @@ choice
is nothing connected to read from the DCC.
config DEBUG_SEMIHOSTING
bool "Kernel low-level debug output via semihosting I"
bool "Kernel low-level debug output via semihosting I/O"
help
Semihosting enables code running on an ARM target to use
the I/O facilities on a host debugger/emulator through a
simple SVC calls. The host debugger or emulator must have
simple SVC call. The host debugger or emulator must have
semihosting enabled for the special svc call to be trapped
otherwise the kernel will crash.
This is known to work with OpenOCD, as wellas
This is known to work with OpenOCD, as well as
ARM's Fast Models, or any other controlling environment
that implements semihosting.

4
arch/arm/Makefile
Просмотреть файл

@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
%.dtb:
%.dtb: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
dtbs:
dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now

4
arch/arm/boot/compressed/head.S
Просмотреть файл

@ -659,10 +659,14 @@ __armv7_mmu_cache_on:
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
#endif
mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
orrne r0, r0, #1 @ MMU enabled
movne r1, #0xfffffffd @ domain 0 = client
bic r6, r6, #1 << 31 @ 32-bit translation system
bic r6, r6, #3 << 0 @ use only ttbr0
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
#endif
mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register

5
arch/arm/boot/dts/am33xx.dtsi
Просмотреть файл

@ -154,5 +154,10 @@
#size-cells = <0>;
ti,hwmods = "i2c3";
};
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};
};
};

2
arch/arm/boot/dts/at91sam9g25ek.dts
Просмотреть файл

@ -15,7 +15,7 @@
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
ahb {

4
arch/arm/boot/dts/imx51-babbage.dts
Просмотреть файл

@ -25,8 +25,8 @@
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
fsl,cd-internal;
fsl,wp-internal;
fsl,cd-controller;
fsl,wp-controller;
status = "okay";
};

6
arch/arm/boot/dts/kirkwood-iconnect.dts
Просмотреть файл

@ -41,9 +41,13 @@
};
power-blue {
label = "power:blue";
gpios = <&gpio1 11 0>;
gpios = <&gpio1 10 0>;
linux,default-trigger = "timer";
};
power-red {
label = "power:red";
gpios = <&gpio1 11 0>;
};
usb1 {
label = "usb1:blue";
gpios = <&gpio1 12 0>;

3
arch/arm/boot/dts/twl6030.dtsi
Просмотреть файл

@ -66,6 +66,7 @@
vcxio: regulator@8 {
compatible = "ti,twl6030-vcxio";
regulator-always-on;
};
vusb: regulator@9 {
@ -74,10 +75,12 @@
v1v8: regulator@10 {
compatible = "ti,twl6030-v1v8";
regulator-always-on;
};
v2v1: regulator@11 {
compatible = "ti,twl6030-v2v1";
regulator-always-on;
};
clk32kg: regulator@12 {

2
arch/arm/configs/armadillo800eva_defconfig
Просмотреть файл

@ -33,7 +33,7 @@ CONFIG_AEABI=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
CONFIG_CMDLINE_FORCE=y
CONFIG_KEXEC=y
CONFIG_VFP=y

1
arch/arm/configs/u8500_defconfig
Просмотреть файл

@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y
CONFIG_RTC_DRV_PL031=y

8
arch/arm/include/asm/assembler.h
Просмотреть файл

@ -320,4 +320,12 @@
.size \name , . - \name
.endm
.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
#ifndef CONFIG_CPU_USE_DOMAINS
adds \tmp, \addr, #\size - 1
sbcccs \tmp, \tmp, \limit
bcs \bad
#endif
.endm
#endif /* __ASM_ASSEMBLER_H__ */

7
arch/arm/include/asm/dma-mapping.h
Просмотреть файл

@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
}
/*
* This can be called during early boot to increase the size of the atomic
* coherent DMA pool above the default value of 256KiB. It must be called
* before postcore_initcall.
*/
extern void __init init_dma_coherent_pool_size(unsigned long size);
/*
* This can be called during boot to increase the size of the consistent
* DMA region above it's default value of 2MB. It must be called before the

3
arch/arm/include/asm/memory.h
Просмотреть файл

@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
#endif
#endif /* __ASSEMBLY__ */
#ifndef PHYS_OFFSET
#ifdef PLAT_PHYS_OFFSET
@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
#endif
#endif
#ifndef __ASSEMBLY__
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.

4
arch/arm/include/asm/tlb.h
Просмотреть файл

@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
{
pgtable_page_dtor(pte);
#ifdef CONFIG_ARM_LPAE
tlb_add_flush(tlb, addr);
#else
/*
* With the classic ARM MMU, a pte page has two corresponding pmd
* entries, each covering 1MB.
@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
addr &= PMD_MASK;
tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
tlb_add_flush(tlb, addr + SZ_1M);
#endif
tlb_remove_page(tlb, pte);
}

58
arch/arm/include/asm/uaccess.h
Просмотреть файл

@ -101,28 +101,39 @@ extern int __get_user_1(void *);
extern int __get_user_2(void *);
extern int __get_user_4(void *);
#define __get_user_x(__r2,__p,__e,__s,__i...) \
#define __GUP_CLOBBER_1 "lr", "cc"
#ifdef CONFIG_CPU_USE_DOMAINS
#define __GUP_CLOBBER_2 "ip", "lr", "cc"
#else
#define __GUP_CLOBBER_2 "lr", "cc"
#endif
#define __GUP_CLOBBER_4 "lr", "cc"
#define __get_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%1", "r2") \
__asmeq("%3", "r1") \
"bl __get_user_" #__s \
: "=&r" (__e), "=r" (__r2) \
: "0" (__p) \
: __i, "cc")
: "0" (__p), "r" (__l) \
: __GUP_CLOBBER_##__s)
#define get_user(x,p) \
#define __get_user_check(x,p) \
({ \
unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
register unsigned long __r2 asm("r2"); \
register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
__get_user_x(__r2, __p, __e, 1, "lr"); \
break; \
__get_user_x(__r2, __p, __e, __l, 1); \
break; \
case 2: \
__get_user_x(__r2, __p, __e, 2, "r3", "lr"); \
__get_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
__get_user_x(__r2, __p, __e, 4, "lr"); \
__get_user_x(__r2, __p, __e, __l, 4); \
break; \
default: __e = __get_user_bad(); break; \
} \
@ -130,42 +141,57 @@ extern int __get_user_4(void *);
__e; \
})
#define get_user(x,p) \
({ \
might_fault(); \
__get_user_check(x,p); \
})
extern int __put_user_1(void *, unsigned int);
extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
#define __put_user_x(__r2,__p,__e,__s) \
#define __put_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
__asmeq("%3", "r1") \
"bl __put_user_" #__s \
: "=&r" (__e) \
: "0" (__p), "r" (__r2) \
: "0" (__p), "r" (__r2), "r" (__l) \
: "ip", "lr", "cc")
#define put_user(x,p) \
#define __put_user_check(x,p) \
({ \
unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __r2 asm("r2") = (x); \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
__put_user_x(__r2, __p, __e, 1); \
__put_user_x(__r2, __p, __e, __l, 1); \
break; \
case 2: \
__put_user_x(__r2, __p, __e, 2); \
__put_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
__put_user_x(__r2, __p, __e, 4); \
__put_user_x(__r2, __p, __e, __l, 4); \
break; \
case 8: \
__put_user_x(__r2, __p, __e, 8); \
__put_user_x(__r2, __p, __e, __l, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
#define put_user(x,p) \
({ \
might_fault(); \
__put_user_check(x,p); \
})
#else /* CONFIG_MMU */
/*
@ -219,6 +245,7 @@ do { \
unsigned long __gu_addr = (unsigned long)(ptr); \
unsigned long __gu_val; \
__chk_user_ptr(ptr); \
might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
@ -300,6 +327,7 @@ do { \
unsigned long __pu_addr = (unsigned long)(ptr); \
__typeof__(*(ptr)) __pu_val = (x); \
__chk_user_ptr(ptr); \
might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \

62
arch/arm/kernel/hw_breakpoint.c
Просмотреть файл

@ -159,6 +159,12 @@ static int debug_arch_supported(void)
arch >= ARM_DEBUG_ARCH_V7_1;
}
/* Can we determine the watchpoint access type from the fsr? */
static int debug_exception_updates_fsr(void)
{
return 0;
}
/* Determine number of WRP registers available. */
static int get_num_wrp_resources(void)
{
@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
/* Aligned */
break;
case 1:
/* Allow single byte watchpoint. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
break;
case 2:
/* Allow halfword watchpoints and breakpoints. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
case 3:
/* Allow single byte watchpoint. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
break;
default:
ret = -EINVAL;
goto out;
@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
info->address &= ~alignment_mask;
info->ctrl.len <<= offset;
/*
* Currently we rely on an overflow handler to take
* care of single-stepping the breakpoint when it fires.
* In the case of userspace breakpoints on a core with V7 debug,
* we can use the mismatch feature as a poor-man's hardware
* single-step, but this only works for per-task breakpoints.
*/
if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
!core_has_mismatch_brps() || !bp->hw.bp_target)) {
pr_warning("overflow handler required but none found\n");
ret = -EINVAL;
if (!bp->overflow_handler) {
/*
* Mismatch breakpoints are required for single-stepping
* breakpoints.
*/
if (!core_has_mismatch_brps())
return -EINVAL;
/* We don't allow mismatch breakpoints in kernel space. */
if (arch_check_bp_in_kernelspace(bp))
return -EPERM;
/*
* Per-cpu breakpoints are not supported by our stepping
* mechanism.
*/
if (!bp->hw.bp_target)
return -EINVAL;
/*
* We only support specific access types if the fsr
* reports them.
*/
if (!debug_exception_updates_fsr() &&
(info->ctrl.type == ARM_BREAKPOINT_LOAD ||
info->ctrl.type == ARM_BREAKPOINT_STORE))
return -EINVAL;
}
out:
return ret;
}
@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
goto unlock;
/* Check that the access type matches. */
access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
HW_BREAKPOINT_R;
if (!(access & hw_breakpoint_type(wp)))
goto unlock;
if (debug_exception_updates_fsr()) {
access = (fsr & ARM_FSR_ACCESS_MASK) ?
HW_BREAKPOINT_W : HW_BREAKPOINT_R;
if (!(access & hw_breakpoint_type(wp)))
goto unlock;
}
/* We have a winner. */
info->trigger = addr;

11
arch/arm/kernel/traps.c
Просмотреть файл

@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
#endif
instr = *(u32 *) pc;
} else if (thumb_mode(regs)) {
get_user(instr, (u16 __user *)pc);
if (get_user(instr, (u16 __user *)pc))
goto die_sig;
if (is_wide_instruction(instr)) {
unsigned int instr2;
get_user(instr2, (u16 __user *)pc+1);
if (get_user(instr2, (u16 __user *)pc+1))
goto die_sig;
instr <<= 16;
instr |= instr2;
}
} else {
get_user(instr, (u32 __user *)pc);
} else if (get_user(instr, (u32 __user *)pc)) {
goto die_sig;
}
if (call_undef_hook(regs, instr) == 0)
return;
die_sig:
#ifdef CONFIG_DEBUG_USER
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",

1
arch/arm/lib/delay.c
Просмотреть файл

@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq)
{
pr_info("Switching to timer-based delay loop\n");
lpj_fine = freq / HZ;
loops_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;

23
arch/arm/lib/getuser.S
Просмотреть файл

@ -16,8 +16,9 @@
* __get_user_X
*
* Inputs: r0 contains the address
* r1 contains the address limit, which must be preserved
* Outputs: r0 is the error code
* r2, r3 contains the zero-extended value
* r2 contains the zero-extended value
* lr corrupted
*
* No other registers must be altered. (see <asm/uaccess.h>
@ -27,33 +28,39 @@
* Note also that it is intended that __get_user_bad is not global.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__get_user_1)
check_uaccess r0, 1, r1, r2, __get_user_bad
1: TUSER(ldrb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
#ifdef CONFIG_THUMB2_KERNEL
2: TUSER(ldrb) r2, [r0]
3: TUSER(ldrb) r3, [r0, #1]
check_uaccess r0, 2, r1, r2, __get_user_bad
#ifdef CONFIG_CPU_USE_DOMAINS
rb .req ip
2: ldrbt r2, [r0], #1
3: ldrbt rb, [r0], #0
#else
2: TUSER(ldrb) r2, [r0], #1
3: TUSER(ldrb) r3, [r0]
rb .req r0
2: ldrb r2, [r0]
3: ldrb rb, [r0, #1]
#endif
#ifndef __ARMEB__
orr r2, r2, r3, lsl #8
orr r2, r2, rb, lsl #8
#else
orr r2, r3, r2, lsl #8
orr r2, rb, r2, lsl #8
#endif
mov r0, #0
mov pc, lr
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
check_uaccess r0, 4, r1, r2, __get_user_bad
4: TUSER(ldr) r2, [r0]
mov r0, #0
mov pc, lr

6
arch/arm/lib/putuser.S
Просмотреть файл

@ -16,6 +16,7 @@
* __put_user_X
*
* Inputs: r0 contains the address
* r1 contains the address limit, which must be preserved
* r2, r3 contains the value
* Outputs: r0 is the error code
* lr corrupted
@ -27,16 +28,19 @@
* Note also that it is intended that __put_user_bad is not global.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__put_user_1)
check_uaccess r0, 1, r1, ip, __put_user_bad
1: TUSER(strb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_1)
ENTRY(__put_user_2)
check_uaccess r0, 2, r1, ip, __put_user_bad
mov ip, r2, lsr #8
#ifdef CONFIG_THUMB2_KERNEL
#ifndef __ARMEB__
@ -60,12 +64,14 @@ ENTRY(__put_user_2)
ENDPROC(__put_user_2)
ENTRY(__put_user_4)
check_uaccess r0, 4, r1, ip, __put_user_bad
4: TUSER(str) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
check_uaccess r0, 8, r1, ip, __put_user_bad
#ifdef CONFIG_THUMB2_KERNEL
5: TUSER(str) r2, [r0]
6: TUSER(str) r3, [r0, #4]

2
arch/arm/mach-at91/at91rm9200_time.c
Просмотреть файл

@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
at91_st_read(AT91_ST_SR);
/* Make IRQs happen for the system timer */
setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting

6
arch/arm/mach-at91/at91sam9260_devices.c
Просмотреть файл

@ -726,6 +726,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
},
};
@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
at91sam9260_rtt_device.num_resources = 2;
at91sam9260_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)

6
arch/arm/mach-at91/at91sam9261_devices.c
Просмотреть файл

@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}
};
@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
at91sam9261_rtt_device.num_resources = 2;
at91sam9261_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)

10
arch/arm/mach-at91/at91sam9263_devices.c
Просмотреть файл

@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}
};
@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}
};
@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed only for the chosen RTT:
* GPBR will serve as the storage for RTC time offset
*/
at91sam9263_rtt0_device.num_resources = 2;
at91sam9263_rtt0_device.num_resources = 3;
at91sam9263_rtt1_device.num_resources = 1;
pdev = &at91sam9263_rtt0_device;
r = rtt0_resources;
break;
case 1:
at91sam9263_rtt0_device.num_resources = 1;
at91sam9263_rtt1_device.num_resources = 2;
at91sam9263_rtt1_device.num_resources = 3;
pdev = &at91sam9263_rtt1_device;
r = rtt1_resources;
break;
@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void)
pdev->name = "rtc-at91sam9";
r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
r[1].end = r[1].start + 3;
r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)

6
arch/arm/mach-at91/at91sam9g45_devices.c
Просмотреть файл

@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}
};
@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
at91sam9g45_rtt_device.num_resources = 2;
at91sam9g45_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)

6
arch/arm/mach-at91/at91sam9rl_devices.c
Просмотреть файл

@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}
};
@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
at91sam9rl_rtt_device.num_resources = 2;
at91sam9rl_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)

12
arch/arm/mach-at91/clock.c
Просмотреть файл

@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
#define cpu_has_240M_plla() (cpu_is_at91sam9261() \
|| cpu_is_at91sam9263() \
|| cpu_is_at91sam9rl())
#define cpu_has_210M_plla() (cpu_is_at91sam9260())
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
} else if (cpu_has_800M_plla()) {
if (plla.rate_hz > 800000000)
pll_overclock = true;
} else if (cpu_has_240M_plla()) {
if (plla.rate_hz > 240000000)
pll_overclock = true;
} else if (cpu_has_210M_plla()) {
if (plla.rate_hz > 210000000)
pll_overclock = true;
} else {
if (plla.rate_hz > 209000000)
pll_overclock = true;

3
arch/arm/mach-dove/common.c
Просмотреть файл

@ -102,7 +102,8 @@ void __init dove_ehci1_init(void)
void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
1600);
}
/*****************************************************************************

7
arch/arm/mach-exynos/mach-origen.c
Просмотреть файл

@ -42,6 +42,7 @@
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/hdmi.h>
#include <mach/ohci.h>
#include <mach/map.h>
@ -734,6 +735,11 @@ static void __init origen_bt_setup(void)
s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
}
/* I2C module and id for HDMIPHY */
static struct i2c_board_info hdmiphy_info = {
I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
};
static void s5p_tv_setup(void)
{
/* Direct HPD to HDMI chip */
@ -781,6 +787,7 @@ static void __init origen_machine_init(void)
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;

7
arch/arm/mach-exynos/mach-smdkv310.c
Просмотреть файл

@ -40,6 +40,7 @@
#include <plat/mfc.h>
#include <plat/ehci.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/map.h>
#include <mach/ohci.h>
@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
.pwm_period_ns = 1000,
};
/* I2C module and id for HDMIPHY */
static struct i2c_board_info hdmiphy_info = {
I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
};
static void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void)
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
samsung_keypad_set_platdata(&smdkv310_keypad_data);

1
arch/arm/mach-gemini/irq.c
Просмотреть файл

@ -17,6 +17,7 @@
#include <linux/sched.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
#define IRQ_SOURCE(base_addr) (base_addr + 0x00)

10
arch/arm/mach-imx/Makefile
Просмотреть файл

@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o
@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
obj-$(CONFIG_CPU_V7) += head-v7.o
AFLAGS_head-v7.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += platsmp.o
AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
endif
# i.MX5 based machines

6
arch/arm/mach-imx/clk-imx25.c
Просмотреть файл

@ -222,10 +222,8 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");

6
arch/arm/mach-imx/clk-imx35.c
Просмотреть файл

@ -230,10 +230,8 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
/* i.mx35 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");

8
arch/arm/mach-imx/clk-imx6q.c
Просмотреть файл

@ -152,7 +152,7 @@ enum mx6q_clks {
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
clk_max
};
@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void)
clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1);
clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1);
clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1);
clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1);
clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);

0
arch/arm/mach-imx/head-v7.S → arch/arm/mach-imx/headsmp.S
Просмотреть файл

23
arch/arm/mach-imx/hotplug.c
Просмотреть файл

@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
: "cc");
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
asm volatile(
"mrc p15, 0, %0, c1, c0, 0\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
/*
* platform-specific code to shutdown a CPU
*
@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
/* spin here until hardware takes it down */
while (1)
;
}
int platform_cpu_disable(unsigned int cpu)

4
arch/arm/mach-imx/mach-imx6q.c
Просмотреть файл

@ -71,7 +71,7 @@ soft:
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
if (IS_ENABLED(CONFIG_PHYLIB)) {
if (IS_BUILTIN(CONFIG_PHYLIB)) {
/* min rx data delay */
phy_write(phydev, 0x0b, 0x8105);
phy_write(phydev, 0x0c, 0x0000);
@ -112,7 +112,7 @@ put_clk:
static void __init imx6q_sabrelite_init(void)
{
if (IS_ENABLED(CONFIG_PHYLIB))
if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
imx6q_sabrelite_cko1_setup();

3
arch/arm/mach-kirkwood/Makefile.boot
Просмотреть файл

@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb
dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb

11
arch/arm/mach-kirkwood/common.c
Просмотреть файл

@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
IRQ_KIRKWOOD_GE00_ERR, 1600);
/* The interface forgets the MAC address assigned by u-boot if
the clock is turned off, so claim the clk now. */
clk_prepare_enable(ge0);
@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
IRQ_KIRKWOOD_GE01_ERR, 1600);
clk_prepare_enable(ge1);
}
@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void)
void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
/*
* Some Kirkwood devices allocate their coherent buffers from atomic
* context. Increase size of atomic coherent pool to make sure such
* the allocations won't fail.
*/
init_dma_coherent_pool_size(SZ_1M);
}
int kirkwood_tclk;

1
arch/arm/mach-kirkwood/db88f6281-bp-setup.c
Просмотреть файл

@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sizes.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>

2
arch/arm/mach-mmp/sram.c
Просмотреть файл

@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
struct resource *res;
int ret = 0;
if (!pdata && !pdata->pool_name)
if (!pdata || !pdata->pool_name)
return -ENODEV;
info = kzalloc(sizeof(*info), GFP_KERNEL);

2
arch/arm/mach-mv78xx0/addr-map.c
Просмотреть файл

@ -37,7 +37,7 @@
#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
static void __init __iomem *win_cfg_base(int win)
static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
{
/*
* Find the control register base address for this window.

6
arch/arm/mach-mv78xx0/common.c
Просмотреть файл

@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
IRQ_MV78XX0_GE_ERR);
IRQ_MV78XX0_GE_ERR,
MV643XX_TX_CSUM_DEFAULT_LIMIT);
}
@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
NO_IRQ);
NO_IRQ,
MV643XX_TX_CSUM_DEFAULT_LIMIT);
}

6
arch/arm/mach-omap2/Kconfig
Просмотреть файл

@ -62,13 +62,14 @@ config ARCH_OMAP4
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
select ARCH_NEEDS_CPU_IDLE_COUPLED
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
config SOC_OMAP5
bool "TI OMAP5"
select CPU_V7
select ARM_GIC
select HAVE_SMP
select ARM_CPU_SUSPEND if PM
comment "OMAP Core Type"
depends on ARCH_OMAP2
@ -231,10 +232,11 @@ config MACH_OMAP3_PANDORA
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP3_TOUCHBOOK
config MACH_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"

2
arch/arm/mach-omap2/Makefile
Просмотреть файл

@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o

2
arch/arm/mach-omap2/board-igep0020.c
Просмотреть файл

@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif

1
arch/arm/mach-omap2/board-omap3evm.c
Просмотреть файл

@ -58,6 +58,7 @@
#include "hsmmc.h"
#include "common-board-devices.h"
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
#define OMAP3_EVM_EHCI_SELECT 61

14
arch/arm/mach-omap2/clock33xx_data.c
Просмотреть файл

@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = {
CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX),
CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX),
CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX),
CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX),
CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX),
CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX),
CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX),
CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX),
CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX),
CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX),
CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX),
CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX),
CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX),
CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX),
CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX),
CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX),

50
arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
Просмотреть файл

@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
_clkdm_del_autodeps(clkdm);
}
static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
_disable_hwsup(clkdm);
_clkdm_add_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap3_clkdm_wakeup(clkdm);
}
return 0;
}
static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
_disable_hwsup(clkdm);
_clkdm_del_autodeps(clkdm);
_enable_hwsup(clkdm);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap3_clkdm_sleep(clkdm);
}
return 0;
}
struct clkdm_ops omap2_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = {
.clkdm_wakeup = omap3_clkdm_wakeup,
.clkdm_allow_idle = omap3_clkdm_allow_idle,
.clkdm_deny_idle = omap3_clkdm_deny_idle,
.clkdm_clk_enable = omap2_clkdm_clk_enable,
.clkdm_clk_disable = omap2_clkdm_clk_disable,
.clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
.clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
};

1
arch/arm/mach-omap2/cm-regbits-34xx.h
Просмотреть файл

@ -67,6 +67,7 @@
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
/* CM_IDLEST_IVA2 */
#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_MASK (1 << 0)
/* CM_IDLEST_PLL_IVA2 */

11
arch/arm/mach-omap2/common-board-devices.c
Просмотреть файл

@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.turbo_mode = 0,
};
/*
* ADS7846 driver maybe request a gpio according to the value
* of pdata->get_pendown_state, but we have done this. So set
* get_pendown_state to avoid twice gpio requesting.
*/
static int omap3_get_pendown_state(void)
{
return !gpio_get_value(OMAP3_EVM_TS_GPIO);
}
static struct ads7846_platform_data ads7846_config = {
.x_max = 0x0fff,
.y_max = 0x0fff,
@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
.debounce_rep = 1,
.gpio_pendown = -EINVAL,
.keep_vref_on = 1,
.get_pendown_state = &omap3_get_pendown_state,
};
static struct spi_board_info ads7846_spi_board_info __initdata = {

1
arch/arm/mach-omap2/common-board-devices.h
Просмотреть файл

@ -4,7 +4,6 @@
#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP3_EVM_TS_GPIO 175
struct mtd_partition;
struct ads7846_platform_data;

3
arch/arm/mach-omap2/cpuidle44xx.c
Просмотреть файл

@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
for_each_cpu(cpu_id, cpu_online_mask) {
dev = &per_cpu(omap4_idle_dev, cpu_id);
dev->cpu = cpu_id;
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
dev->coupled_cpus = *cpu_online_mask;
#endif
cpuidle_register_driver(&omap4_idle_driver);
if (cpuidle_register_device(dev)) {

1
arch/arm/mach-omap2/mux.h
Просмотреть файл

@ -127,7 +127,6 @@ struct omap_mux_partition {
* @gpio: GPIO number
* @muxnames: available signal modes for a ball
* @balls: available balls on the package
* @partition: mux partition
*/
struct omap_mux {
u16 reg_offset;

2
arch/arm/mach-omap2/omap-wakeupgen.c
Просмотреть файл

@ -46,7 +46,7 @@
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[NR_IRQS];
static unsigned int irq_target_cpu[MAX_IRQS];
static unsigned int irq_banks = MAX_NR_REG_BANKS;
static unsigned int max_irqs = MAX_IRQS;
static unsigned int omap_secure_apis;

1
arch/arm/mach-omap2/omap_hwmod.c
Просмотреть файл

@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh)
_enable_sysc(oh);
}
} else {
_omap4_disable_module(oh);
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
oh->name, r);

15
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
Просмотреть файл

@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = {
/* IVA2 (IVA2) */
static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
{ .name = "logic", .rst_shift = 0 },
{ .name = "seq0", .rst_shift = 1 },
{ .name = "seq1", .rst_shift = 2 },
{ .name = "logic", .rst_shift = 0, .st_shift = 8 },
{ .name = "seq0", .rst_shift = 1, .st_shift = 9 },
{ .name = "seq1", .rst_shift = 2, .st_shift = 10 },
};
static struct omap_hwmod omap3xxx_iva_hwmod = {
@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
.rst_lines = omap3xxx_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets),
.main_clk = "iva2_ck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_IVA2_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
}
},
};
/* timer class */

12
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
Просмотреть файл

@ -4210,7 +4210,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
};
/* dsp -> sl2if */
static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
.master = &omap44xx_dsp_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
@ -4828,7 +4828,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
};
/* iva -> sl2if */
static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = {
.master = &omap44xx_iva_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
@ -5362,7 +5362,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = {
};
/* l3_main_2 -> sl2if */
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "l3_div_ck",
@ -6032,7 +6032,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_abe__dmic,
&omap44xx_l4_abe__dmic_dma,
&omap44xx_dsp__iva,
&omap44xx_dsp__sl2if,
/* &omap44xx_dsp__sl2if, */
&omap44xx_l4_cfg__dsp,
&omap44xx_l3_main_2__dss,
&omap44xx_l4_per__dss,
@ -6068,7 +6068,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__i2c4,
&omap44xx_l3_main_2__ipu,
&omap44xx_l3_main_2__iss,
&omap44xx_iva__sl2if,
/* &omap44xx_iva__sl2if, */
&omap44xx_l3_main_2__iva,
&omap44xx_l4_wkup__kbd,
&omap44xx_l4_cfg__mailbox,
@ -6099,7 +6099,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__cm_core,
&omap44xx_l4_wkup__prm,
&omap44xx_l4_wkup__scrm,
&omap44xx_l3_main_2__sl2if,
/* &omap44xx_l3_main_2__sl2if, */
&omap44xx_l4_abe__slimbus1,
&omap44xx_l4_abe__slimbus1_dma,
&omap44xx_l4_per__slimbus2,

2
arch/arm/mach-omap2/opp4xxx_data.c
Просмотреть файл

@ -94,7 +94,7 @@ int __init omap4_opp_init(void)
{
int r = -ENODEV;
if (!cpu_is_omap44xx())
if (!cpu_is_omap443x())
return r;
r = omap_init_opp_table(omap44xx_opp_def_list,

21
arch/arm/mach-omap2/pm34xx.c
Просмотреть файл

@ -272,21 +272,16 @@ void omap_sram_idle(void)
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
if (mpu_next_state < PWRDM_POWER_ON) {
pwrdm_pre_transition(mpu_pwrdm);
pwrdm_pre_transition(neon_pwrdm);
}
pwrdm_pre_transition(NULL);
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
pwrdm_pre_transition(per_pwrdm);
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap2_gpio_prepare_for_idle(per_going_off);
}
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
pwrdm_pre_transition(core_pwrdm);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
@ -339,20 +334,14 @@ void omap_sram_idle(void)
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
pwrdm_post_transition(core_pwrdm);
}
omap3_intc_resume_idle();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap2_gpio_resume_after_idle();
pwrdm_post_transition(per_pwrdm);
}
pwrdm_post_transition(NULL);
if (mpu_next_state < PWRDM_POWER_ON) {
pwrdm_post_transition(mpu_pwrdm);
pwrdm_post_transition(neon_pwrdm);
}
/* PER */
if (per_next_state < PWRDM_POWER_ON)
omap2_gpio_resume_after_idle();
}
static void omap3_pm_idle(void)

8
arch/arm/mach-omap2/sleep44xx.S
Просмотреть файл

@ -56,9 +56,13 @@ ppa_por_params:
* The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
* It returns to the caller for CPU INACTIVE and ON power states or in case
* CPU failed to transition to targeted OFF/DORMANT state.
*
* omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
* stack frame and it expects the caller to take care of it. Hence the entire
* stack frame is saved to avoid possible stack corruption.
*/
ENTRY(omap4_finish_suspend)
stmfd sp!, {lr}
stmfd sp!, {r4-r12, lr}
cmp r0, #0x0
beq do_WFI @ No lowpower state, jump to WFI
@ -226,7 +230,7 @@ scu_gp_clear:
skip_scu_gp_clear:
isb
dsb
ldmfd sp!, {pc}
ldmfd sp!, {r4-r12, pc}
ENDPROC(omap4_finish_suspend)
/*

7
arch/arm/mach-omap2/timer.c
Просмотреть файл

@ -260,6 +260,7 @@ static u32 notrace dmtimer_read_sched_clock(void)
return 0;
}
#ifdef CONFIG_OMAP_32K_TIMER
/* Setup free-running counter for clocksource */
static int __init omap2_sync32k_clocksource_init(void)
{
@ -299,6 +300,12 @@ static int __init omap2_sync32k_clocksource_init(void)
return ret;
}
#else
static inline int omap2_sync32k_clocksource_init(void)
{
return -ENODEV;
}
#endif
static void __init omap2_gptimer_clocksource_init(int gptimer_id,
const char *fck_source)

1
arch/arm/mach-omap2/twl-common.c
Просмотреть файл

@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
{
omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(pmic_i2c_board_info.type, pmic_type,
sizeof(pmic_i2c_board_info.type));
pmic_i2c_board_info.irq = pmic_irq;

3
arch/arm/mach-orion5x/common.c
Просмотреть файл

@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data,
ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
IRQ_ORION5X_ETH_ERR);
IRQ_ORION5X_ETH_ERR,
MV643XX_TX_CSUM_DEFAULT_LIMIT);
}

3
arch/arm/mach-s3c24xx/include/mach/dma.h
Просмотреть файл

@ -24,7 +24,8 @@
*/
enum dma_ch {
DMACH_XD0,
DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_XD0 = 0,
DMACH_XD1,
DMACH_SDI,
DMACH_SPI0,

13
arch/arm/mach-shmobile/board-armadillo800eva.c
Просмотреть файл

@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = {
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"),
GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"),
GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"),
GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"),
GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1),
GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"),
GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"),
GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"),
};
static struct gpio_keys_platform_data gpio_key_info = {
@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = {
&camera_device,
&ceu0_device,
&fsi_device,
&fsi_hdmi_device,
&fsi_wm8978_device,
&fsi_hdmi_device,
};
static void __init eva_clock_init(void)

3
arch/arm/mach-shmobile/board-mackerel.c
Просмотреть файл

@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = {
* - J30 "open"
* - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
* - add .get_vbus = usbhs_get_vbus in usbhs1_private
* - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
*/
#define IRQ8 evt2irq(0x0300)
#define USB_PHY_MODE (1 << 4)
@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
&usbhs1_device,
&usbhs0_device,
&usbhs1_device,
&leds_device,
&fsi_device,
&fsi_ak4643_device,

2
arch/arm/mach-shmobile/board-marzen.c
Просмотреть файл

@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
static struct platform_device eth_device = {
.name = "smsc911x",
.id = 0,
.id = -1,
.dev = {
.platform_data = &smsc911x_platdata,
},

4
arch/arm/mach-shmobile/intc-sh73a0.c
Просмотреть файл

@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
return 0; /* always allow wakeup */
}
#define RELOC_BASE 0x1000
#define RELOC_BASE 0x1200
/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,

1
arch/arm/mach-ux500/Kconfig
Просмотреть файл

@ -41,7 +41,6 @@ config MACH_HREFV60
config MACH_SNOWBALL
bool "U8500 Snowball platform"
select MACH_MOP500
select LEDS_GPIO
help
Include support for the snowball development platform.

10
arch/arm/mach-ux500/board-mop500-msp.c
Просмотреть файл

@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
return pdev;
}
/* Platform device for ASoC U8500 machine */
static struct platform_device snd_soc_u8500 = {
.name = "snd-soc-u8500",
/* Platform device for ASoC MOP500 machine */
static struct platform_device snd_soc_mop500 = {
.name = "snd-soc-mop500",
.id = 0,
.dev = {
.platform_data = NULL,
@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent)
{
struct platform_device *msp1;
pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
platform_device_register(&snd_soc_u8500);
pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
platform_device_register(&snd_soc_mop500);
pr_info("Initialize MSP I2S-devices.\n");
db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,

4
arch/arm/mach-ux500/board-mop500.c
Просмотреть файл

@ -797,6 +797,7 @@ static void __init u8500_init_machine(void)
ARRAY_SIZE(mop500_platform_devs));
mop500_sdi_init(parent);
mop500_msp_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
@ -804,6 +805,8 @@ static void __init u8500_init_machine(void)
mop500_uib_init();
} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
mop500_msp_init(parent);
} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
/*
* The HREFv60 board removed a GPIO expander and routed
@ -815,6 +818,7 @@ static void __init u8500_init_machine(void)
ARRAY_SIZE(mop500_platform_devs));
hrefv60_sdi_init(parent);
mop500_msp_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;

7
arch/arm/mm/context.c
Просмотреть файл

@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
pid = task_pid_nr(thread->task) << ASID_BITS;
asm volatile(
" mrc p15, 0, %0, c13, c0, 1\n"
" bfi %1, %0, #0, %2\n"
" mcr p15, 0, %1, c13, c0, 1\n"
" and %0, %0, %2\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c13, c0, 1\n"
: "=r" (contextidr), "+r" (pid)
: "I" (ASID_BITS));
: "I" (~ASID_MASK));
isb();
return NOTIFY_OK;

114
arch/arm/mm/dma-mapping.c
Просмотреть файл

@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
vunmap(cpu_addr);
}
#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K
struct dma_pool {
size_t size;
spinlock_t lock;
unsigned long *bitmap;
unsigned long nr_pages;
void *vaddr;
struct page *page;
struct page **pages;
};
static struct dma_pool atomic_pool = {
.size = SZ_256K,
.size = DEFAULT_DMA_COHERENT_POOL_SIZE,
};
static int __init early_coherent_pool(char *p)
@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p)
}
early_param("coherent_pool", early_coherent_pool);
void __init init_dma_coherent_pool_size(unsigned long size)
{
/*
* Catch any attempt to set the pool size too late.
*/
BUG_ON(atomic_pool.vaddr);
/*
* Set architecture specific coherent pool size only if
* it has not been changed by kernel command line parameter.
*/
if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE)
atomic_pool.size = size;
}
/*
* Initialise the coherent pool for atomic allocations.
*/
@ -297,6 +314,7 @@ static int __init atomic_pool_init(void)
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
struct page **pages;
void *ptr;
int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
@ -304,21 +322,31 @@ static int __init atomic_pool_init(void)
if (!bitmap)
goto no_bitmap;
pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
if (!pages)
goto no_pages;
if (IS_ENABLED(CONFIG_CMA))
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page);
else
ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
&page, NULL);
if (ptr) {
int i;
for (i = 0; i < nr_pages; i++)
pages[i] = page + i;
spin_lock_init(&pool->lock);
pool->vaddr = ptr;
pool->page = page;
pool->pages = pages;
pool->bitmap = bitmap;
pool->nr_pages = nr_pages;
pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
(unsigned)pool->size / 1024);
return 0;
}
no_pages:
kfree(bitmap);
no_bitmap:
pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
if (pageno < pool->nr_pages) {
bitmap_set(pool->bitmap, pageno, count);
ptr = pool->vaddr + PAGE_SIZE * pageno;
*ret_page = pool->page + pageno;
*ret_page = pool->pages[pageno];
} else {
pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n"
"Please increase it with coherent_pool= kernel parameter!\n",
(unsigned)pool->size / 1024);
}
spin_unlock_irqrestore(&pool->lock, flags);
return ptr;
}
static bool __in_atomic_pool(void *start, size_t size)
{
struct dma_pool *pool = &atomic_pool;
void *end = start + size;
void *pool_start = pool->vaddr;
void *pool_end = pool->vaddr + pool->size;
if (start < pool_start || start >= pool_end)
return false;
if (end <= pool_end)
return true;
WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n",
start, end - 1, pool_start, pool_end - 1);
return false;
}
static int __free_from_pool(void *start, size_t size)
{
struct dma_pool *pool = &atomic_pool;
unsigned long pageno, count;
unsigned long flags;
if (start < pool->vaddr || start > pool->vaddr + pool->size)
if (!__in_atomic_pool(start, size))
return 0;
if (start + size > pool->vaddr + pool->size) {
WARN(1, "freeing wrong coherent size from pool\n");
return 0;
}
pageno = (start - pool->vaddr) >> PAGE_SHIFT;
count = size >> PAGE_SHIFT;
@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si
return 0;
}
static struct page **__atomic_get_pages(void *addr)
{
struct dma_pool *pool = &atomic_pool;
struct page **pages = pool->pages;
int offs = (addr - pool->vaddr) >> PAGE_SHIFT;
return pages + offs;
}
static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
{
struct vm_struct *area;
if (__in_atomic_pool(cpu_addr, PAGE_SIZE))
return __atomic_get_pages(cpu_addr);
if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
return cpu_addr;
@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
return NULL;
}
static void *__iommu_alloc_atomic(struct device *dev, size_t size,
dma_addr_t *handle)
{
struct page *page;
void *addr;
addr = __alloc_from_pool(size, &page);
if (!addr)
return NULL;
*handle = __iommu_create_mapping(dev, &page, size);
if (*handle == DMA_ERROR_CODE)
goto err_mapping;
return addr;
err_mapping:
__free_from_pool(addr, size);
return NULL;
}
static void __iommu_free_atomic(struct device *dev, struct page **pages,
dma_addr_t handle, size_t size)
{
__iommu_remove_mapping(dev, handle, size);
__free_from_pool(page_address(pages[0]), size);
}
static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
{
@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
*handle = DMA_ERROR_CODE;
size = PAGE_ALIGN(size);
if (gfp & GFP_ATOMIC)
return __iommu_alloc_atomic(dev, size, handle);
pages = __iommu_alloc_buffer(dev, size, gfp);
if (!pages)
return NULL;
@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
return;
}
if (__in_atomic_pool(cpu_addr, size)) {
__iommu_free_atomic(dev, pages, handle, size);
return;
}
if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
unmap_kernel_range((unsigned long)cpu_addr, size);
vunmap(cpu_addr);

3
arch/arm/mm/mm.h
Просмотреть файл

@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
/* permanent static mappings from iotable_init() */
#define VM_ARM_STATIC_MAPPING 0x40000000
/* empty mapping */
#define VM_ARM_EMPTY_MAPPING 0x20000000
/* mapping type (attributes) for permanent static mappings */
#define VM_ARM_MTYPE(mt) ((mt) << 20)
#define VM_ARM_MTYPE_MASK (0x1f << 20)

8
arch/arm/mm/mmu.c
Просмотреть файл

@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr)
vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
vm->addr = (void *)addr;
vm->size = SECTION_SIZE;
vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
vm->caller = pmd_empty_section_gap;
vm_area_add_early(vm);
}
@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void)
/* we're still single threaded hence no lock needed here */
for (vm = vmlist; vm; vm = vm->next) {
if (!(vm->flags & VM_ARM_STATIC_MAPPING))
if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
continue;
addr = (unsigned long)vm->addr;
if (addr < next)
@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void)
* Check whether this memory bank would partially overlap
* the vmalloc area.
*/
if (__va(bank->start + bank->size) > vmalloc_min ||
__va(bank->start + bank->size) < __va(bank->start)) {
if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
__va(bank->start + bank->size - 1) <= __va(bank->start)) {
unsigned long newsize = vmalloc_min - __va(bank->start);
printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
"to -%.8llx (vmalloc region overlap).\n",

6
arch/arm/plat-omap/dmtimer.c
Просмотреть файл

@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
timer->reserved = 1;
break;
}
spin_unlock_irqrestore(&dm_timer_lock, flags);
if (timer) {
ret = omap_dm_timer_prepare(timer);
@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
timer = NULL;
}
}
spin_unlock_irqrestore(&dm_timer_lock, flags);
if (!timer)
pr_debug("%s: timer request failed!\n", __func__);
@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
break;
}
}
spin_unlock_irqrestore(&dm_timer_lock, flags);
if (timer) {
ret = omap_dm_timer_prepare(timer);
@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
timer = NULL;
}
}
spin_unlock_irqrestore(&dm_timer_lock, flags);
if (!timer)
pr_debug("%s: timer%d request failed!\n", __func__, id);
@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
pm_runtime_put(&timer->pdev->dev);
pm_runtime_put_sync(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_disable);

3
arch/arm/plat-omap/include/plat/cpu.h
Просмотреть файл

@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
cpu_is_omap44xx() || soc_is_omap54xx())
cpu_is_omap44xx() || soc_is_omap54xx() || \
soc_is_am33xx())
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024

9
arch/arm/plat-omap/include/plat/multi.h
Просмотреть файл

@ -108,4 +108,13 @@
# endif
#endif
#ifdef CONFIG_SOC_AM33XX
# ifdef OMAP_NAME
# undef MULTI_OMAP2
# define MULTI_OMAP2
# else
# define OMAP_NAME am33xx
# endif
#endif
#endif /* __PLAT_OMAP_MULTI_H */

4
arch/arm/plat-omap/include/plat/uncompress.h
Просмотреть файл

@ -110,7 +110,7 @@ static inline void flush(void)
_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
AM33XXUART##p)
static inline void __arch_decomp_setup(unsigned long arch_id)
static inline void arch_decomp_setup(void)
{
int port = 0;
@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
} while (0);
}
#define arch_decomp_setup() __arch_decomp_setup(arch_id)
/*
* nothing to do
*/

11
arch/arm/plat-omap/sram.c
Просмотреть файл

@ -68,6 +68,7 @@
static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
@ -106,6 +107,7 @@ static int is_sram_locked(void)
*/
static void __init omap_detect_sram(void)
{
omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
@ -113,6 +115,7 @@ static void __init omap_detect_sram(void)
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
@ -175,8 +178,10 @@ static void __init omap_map_sram(void)
return;
#ifdef CONFIG_OMAP4_ERRATA_I688
if (cpu_is_omap44xx()) {
omap_sram_start += PAGE_SIZE;
omap_sram_size -= SZ_16K;
}
#endif
if (cpu_is_omap34xx()) {
/*
@ -203,8 +208,8 @@ static void __init omap_map_sram(void)
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
omap_sram_size - SRAM_BOOTLOADER_SZ);
memset_io(omap_sram_base + omap_sram_skip, 0,
omap_sram_size - omap_sram_skip);
}
/*
@ -218,7 +223,7 @@ void *omap_sram_push_address(unsigned long size)
{
unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
if (size > available) {
pr_err("Not enough space in SRAM\n");

8
arch/arm/plat-orion/common.c
Просмотреть файл

@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err)
unsigned long irq_err,
unsigned int tx_csum_limit)
{
fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge00_shared_data,
orion_ge00_resources, irq, &orion_ge00_shared,
eth_data, &orion_ge00);
@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err)
unsigned long irq_err,
unsigned int tx_csum_limit)
{
fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge01_shared_data,
orion_ge01_resources, irq, &orion_ge01_shared,
eth_data, &orion_ge01);

6
arch/arm/plat-orion/include/plat/common.h
Просмотреть файл

@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err);
unsigned long irq_err,
unsigned int tx_csum_limit);
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err);
unsigned long irq_err,
unsigned int tx_csum_limit);
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,

2
arch/arm/plat-s3c24xx/dma.c
Просмотреть файл

@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
* when necessary.
*/
int s3c2410_dma_enqueue(unsigned int channel, void *id,
int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
dma_addr_t data, int size)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);

29
arch/arm/plat-samsung/devs.c
Просмотреть файл

@ -32,6 +32,8 @@
#include <linux/platform_data/s3c-hsudc.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <media/s5p_hdmi.h>
#include <asm/irq.h>
#include <asm/pmu.h>
#include <asm/mach/arch.h>
@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
if (!pd) {
pd = &default_i2c_data;
if (soc_is_exynos4210())
if (soc_is_exynos4210() ||
soc_is_exynos4212() || soc_is_exynos4412())
pd->bus_num = 8;
else if (soc_is_s5pv210())
pd->bus_num = 3;
@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
&s5p_device_i2c_hdmiphy);
}
struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
struct i2c_board_info *mhl_info, int mhl_bus)
{
struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
if (soc_is_exynos4210() ||
soc_is_exynos4212() || soc_is_exynos4412())
pd->hdmiphy_bus = 8;
else if (soc_is_s5pv210())
pd->hdmiphy_bus = 3;
else
pd->hdmiphy_bus = 0;
pd->hdmiphy_info = hdmiphy_info;
pd->mhl_info = mhl_info;
pd->mhl_bus = mhl_bus;
s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
&s5p_device_hdmi);
}
#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
/* I2S */

16
arch/arm/plat-samsung/include/plat/hdmi.h Normal file
Просмотреть файл

@ -0,0 +1,16 @@
/*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __PLAT_SAMSUNG_HDMI_H
#define __PLAT_SAMSUNG_HDMI_H __FILE__
extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
struct i2c_board_info *mhl_info, int mhl_bus);
#endif /* __PLAT_SAMSUNG_HDMI_H */

2
arch/arm/plat-samsung/pm.c
Просмотреть файл

@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
#ifdef CONFIG_SAMSUNG_PM_DEBUG
struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{

1
arch/blackfin/Kconfig
Просмотреть файл

@ -38,6 +38,7 @@ config BLACKFIN
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
select IRQ_PER_CPU if SMP
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше