ACPI: thinkpad-acpi: add input device support to hotkey subdriver

Add input device support to the hotkey subdriver.

Hot keys that have a valid keycode mapping are reported through the input
layer if the input device is open.  Otherwise, they will be reported as
ACPI events, as they were before.

Scan codes are reported (using EV_MSC MSC_SCAN events) along with EV_KEY
KEY_UNKNOWN events.

For backwards compatibility purposes, hot keys that used to be reported
through ACPI events are not mapped to anything meaningful by default.
Userspace is supposed to remap them if it wants to use the input device for
hot key reporting.

This patch is based on a patch by Richard Hughes <hughsient@gmail.com>.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Hughes <hughsient@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This commit is contained in:
Henrique de Moraes Holschuh 2007-07-18 23:45:35 -03:00 коммит произвёл Len Brown
Родитель 7f5d1cd628
Коммит 6a38abbf2b
2 изменённых файлов: 255 добавлений и 4 удалений

Просмотреть файл

@ -167,6 +167,17 @@ All labeled Fn-Fx key combinations generate distinct events. In
addition, the lid microswitch and some docking station buttons may
also generate such events.
Hot keys also generate regular keyboard key press/release events through
the input layer in addition to the ibm/hotkey ACPI events. The input
layer support accepts the standard IOCTLs to remap the keycodes assigned
to each hotkey.
When the input device is open, the driver will suppress any ACPI hot key
events that get translated into a meaningful input layer event, in order
to avoid sending duplicate events to userspace. Hot keys that are
mapped to KEY_RESERVED are not translated, and will always generate only
ACPI hot key event, and no input layer events.
The bit mask allows some control over which hot keys generate ACPI
events. Not all bits in the mask can be modified. Not all bits that can
be modified do anything. Not all hot keys can be individually controlled
@ -248,6 +259,146 @@ sysfs notes:
disabled" postition, and 1 if the switch is in the
"radios enabled" position.
input layer notes:
A Hot key is mapped to a single input layer EV_KEY event, possibly
followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
code. An EV_SYN event will always be generated to mark the end of the
event block.
Do not use the EV_MSC MSC_SCAN events to process keys. They are to be
used as a helper to remap keys, only. They are particularly useful when
remapping KEY_UNKNOWN keys.
The events are available in an input device, with the following id:
Bus: BUS_HOST
vendor: 0x1014 (PCI_VENDOR_ID_IBM)
product: 0x5054 ("TP")
version: 0x4101
The version will have its LSB incremented if the keymap changes in a
backwards-compatible way. The MSB shall always be 0x41 for this input
device. If the MSB is not 0x41, do not use the device as described in
this section, as it is either something else (e.g. another input device
exported by a thinkpad driver, such as HDAPS) or its functionality has
been changed in a non-backwards compatible way.
Adding other event types for other functionalities shall be considered a
backwards-compatible change for this input device.
Thinkpad-acpi Hot Key event map (version 0x4101):
ACPI Scan
event code Key Notes
0x1001 0x00 FN+F1 -
0x1002 0x01 FN+F2 -
0x1003 0x02 FN+F3 Many models always report this
hot key, even with hot keys
disabled or with Fn+F3 masked
off
0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
semanthics, i.e. sleep-to-RAM).
It is always generate some kind
of event, either the hot key
event or a ACPI sleep button
event. The firmware may
refuse to generate further FN+F4
key presses until a S3 or S4 ACPI
sleep cycle is performed or some
time passes.
0x1005 0x04 FN+F5 Radio. Enables/disables
the internal BlueTooth hardware
and W-WAN card if left in control
of the firmware. Does not affect
the WLAN card.
0x1006 0x05 FN+F6 -
0x1007 0x06 FN+F7 Video output cycle.
Do you feel lucky today?
0x1008 0x07 FN+F8 -
.. .. ..
0x100B 0x0A FN+F11 -
0x100C 0x0B FN+F12 Sleep to disk. You are always
supposed to handle it yourself,
either through the ACPI event,
or through a hotkey event.
The firmware may refuse to
generate further FN+F4 key
press events until a S3 or S4
ACPI sleep cycle is performed,
or some time passes.
0x100D 0x0C FN+BACKSPACE -
0x100E 0x0D FN+INSERT -
0x100F 0x0E FN+DELETE -
0x1010 0x0F FN+HOME Brightness up. This key is
always handled by the firmware,
even when unmasked. Just leave
it alone.
0x1011 0x10 FN+END Brightness down. This key is
always handled by the firmware,
even when unmasked. Just leave
it alone.
0x1012 0x11 FN+PGUP Thinklight toggle. This key is
always handled by the firmware,
even when unmasked.
0x1013 0x12 FN+PGDOWN -
0x1014 0x13 FN+SPACE Zoom key
0x1015 0x14 VOLUME UP Internal mixer volume up. This
key is always handled by the
firmware, even when unmasked.
0x1016 0x15 VOLUME DOWN Internal mixer volume up. This
key is always handled by the
firmware, even when unmasked.
0x1017 0x16 MUTE Mute internal mixer. This
key is always handled by the
firmware, even when unmasked.
0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key
0x1019 0x18 unknown
.. .. ..
0x1020 0x1F unknown
The ThinkPad firmware does not allow one to differentiate when most hot
keys are pressed or released (either that, or we don't know how to, yet).
For these keys, the driver generates a set of events for a key press and
immediately issues the same set of events for a key release. It is
unknown by the driver if the ThinkPad firmware triggered these events on
hot key press or release, but the firmware will do it for either one, not
both.
If a key is mapped to KEY_RESERVED, it generates no input events at all,
and it may generate a legacy thinkpad-acpi ACPI hotkey event.
If a key is mapped to KEY_UNKNOWN, it generates an input event that
includes an scan code, and it may also generate a legacy thinkpad-acpi
ACPI hotkey event.
If a key is mapped to anything else, it will only generate legacy
thinkpad-acpi ACPI hotkey events if nobody has opened the input device.
For userspace backwards-compatibility purposes, the keycode map is
initially filled with KEY_RESERVED and KEY_UNKNOWN mappings for scan codes
0x00 to 0x10 (and maybe others).
Non hot-key ACPI HKEY event map:
0x5001 Lid closed
0x5002 Lid opened
0x7000 Radio Switch may have changed state
Bluetooth
---------

Просмотреть файл

@ -730,7 +730,31 @@ static struct ibm_struct thinkpad_acpi_driver_data = {
static int hotkey_orig_status;
static u32 hotkey_orig_mask;
static u32 hotkey_all_mask;
static u32 hotkey_reserved_mask = 0x00778000;
static u32 hotkey_reserved_mask;
static u16 hotkey_keycode_map[] = {
/* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
/* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */
KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
/* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */
KEY_RESERVED, /* 0x10: FN+END (brightness down) */
KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
KEY_UNKNOWN, /* 0x12: FN+PGDOWN */
KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */
KEY_RESERVED, /* 0x14: VOLUME UP */
KEY_RESERVED, /* 0x15: VOLUME DOWN */
KEY_RESERVED, /* 0x16: MUTE */
KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
};
static struct attribute_set *hotkey_dev_attributes;
@ -889,11 +913,13 @@ static struct attribute *hotkey_mask_attributes[] = {
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
int res;
int res, i;
int status;
vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n");
BUG_ON(!tpacpi_inputdev);
IBM_ACPIHANDLE_INIT(hkey);
mutex_init(&hotkey_mutex);
@ -950,6 +976,23 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
&tpacpi_pdev->dev.kobj);
if (res)
return res;
set_bit(EV_KEY, tpacpi_inputdev->evbit);
set_bit(EV_MSC, tpacpi_inputdev->evbit);
set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
tpacpi_inputdev->keycodesize = sizeof(hotkey_keycode_map[0]);
tpacpi_inputdev->keycodemax = ARRAY_SIZE(hotkey_keycode_map);
tpacpi_inputdev->keycode = &hotkey_keycode_map;
for (i = 0; i < ARRAY_SIZE(hotkey_keycode_map); i++) {
if (hotkey_keycode_map[i] != KEY_RESERVED) {
set_bit(hotkey_keycode_map[i],
tpacpi_inputdev->keybit);
} else {
if (i < sizeof(hotkey_reserved_mask)*8)
hotkey_reserved_mask |= 1 << i;
}
}
}
return (tp_features.hotkey)? 0 : 1;
@ -972,12 +1015,69 @@ static void hotkey_exit(void)
}
}
static void tpacpi_input_send_key(unsigned int scancode,
unsigned int keycode)
{
if (keycode != KEY_RESERVED) {
input_report_key(tpacpi_inputdev, keycode, 1);
if (keycode == KEY_UNKNOWN)
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
scancode);
input_sync(tpacpi_inputdev);
input_report_key(tpacpi_inputdev, keycode, 0);
if (keycode == KEY_UNKNOWN)
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
scancode);
input_sync(tpacpi_inputdev);
}
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
{
int hkey;
u32 hkey;
unsigned int keycode, scancode;
int sendacpi = 1;
if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
acpi_bus_generate_event(ibm->acpi->device, event, hkey);
if (tpacpi_inputdev->users > 0) {
switch (hkey >> 12) {
case 1:
/* 0x1000-0x1FFF: key presses */
scancode = hkey & 0xfff;
if (scancode > 0 && scancode < 0x21) {
scancode--;
keycode = hotkey_keycode_map[scancode];
tpacpi_input_send_key(scancode, keycode);
sendacpi = (keycode == KEY_RESERVED
|| keycode == KEY_UNKNOWN);
} else {
printk(IBM_ERR
"hotkey 0x%04x out of range for keyboard map\n",
hkey);
}
break;
case 5:
/* 0x5000-0x5FFF: LID */
/* we don't handle it through this path, just
* eat up known LID events */
if (hkey != 0x5001 && hkey != 0x5002) {
printk(IBM_ERR
"unknown LID-related hotkey event: 0x%04x\n",
hkey);
}
break;
default:
/* case 2: dock-related */
/* 0x2305 - T43 waking up due to bay lever eject while aslept */
/* case 3: ultra-bay related. maybe bay in dock? */
/* 0x3003 - T43 after wake up by bay lever eject (0x2305) */
printk(IBM_NOTICE "unhandled hotkey event 0x%04x\n", hkey);
}
}
if (sendacpi)
acpi_bus_generate_event(ibm->acpi->device, event, hkey);
} else {
printk(IBM_ERR "unknown hotkey notification event %d\n", event);
acpi_bus_generate_event(ibm->acpi->device, event, 0);