mmc: host: sh_mobile_sdhi: move card_busy from tmio to sdhi
card_busy is only used/tested on SDHI for R-Car Gen2 and later. Move it to the SDHI driver, so we can then activate it conditionally depending on the SDHI type. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Родитель
2dd110b27d
Коммит
6a4679f312
|
@ -213,6 +213,13 @@ static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host *host)
|
|||
clk_disable_unprepare(priv->clk);
|
||||
}
|
||||
|
||||
static int sh_mobile_sdhi_card_busy(struct mmc_host *mmc)
|
||||
{
|
||||
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||||
|
||||
return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & TMIO_STAT_DAT0);
|
||||
}
|
||||
|
||||
static int sh_mobile_sdhi_start_signal_voltage_switch(struct mmc_host *mmc,
|
||||
struct mmc_ios *ios)
|
||||
{
|
||||
|
@ -369,6 +376,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
|
|||
host->clk_update = sh_mobile_sdhi_clk_update;
|
||||
host->clk_disable = sh_mobile_sdhi_clk_disable;
|
||||
host->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk;
|
||||
host->card_busy = sh_mobile_sdhi_card_busy;
|
||||
host->start_signal_voltage_switch = sh_mobile_sdhi_start_signal_voltage_switch;
|
||||
|
||||
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
|
||||
|
|
|
@ -158,6 +158,7 @@ struct tmio_mmc_host {
|
|||
void (*clk_disable)(struct tmio_mmc_host *host);
|
||||
int (*multi_io_quirk)(struct mmc_card *card,
|
||||
unsigned int direction, int blk_size);
|
||||
int (*card_busy)(struct mmc_host *mmc);
|
||||
int (*start_signal_voltage_switch)(struct mmc_host *mmc,
|
||||
struct mmc_ios *ios);
|
||||
};
|
||||
|
|
|
@ -960,20 +960,12 @@ static int tmio_multi_io_quirk(struct mmc_card *card,
|
|||
return blk_size;
|
||||
}
|
||||
|
||||
static int tmio_mmc_card_busy(struct mmc_host *mmc)
|
||||
{
|
||||
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||||
|
||||
return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & TMIO_STAT_DAT0);
|
||||
}
|
||||
|
||||
static struct mmc_host_ops tmio_mmc_ops = {
|
||||
.request = tmio_mmc_request,
|
||||
.set_ios = tmio_mmc_set_ios,
|
||||
.get_ro = tmio_mmc_get_ro,
|
||||
.get_cd = mmc_gpio_get_cd,
|
||||
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
|
||||
.card_busy = tmio_mmc_card_busy,
|
||||
.multi_io_quirk = tmio_multi_io_quirk,
|
||||
};
|
||||
|
||||
|
@ -1072,6 +1064,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
|
|||
goto host_free;
|
||||
}
|
||||
|
||||
tmio_mmc_ops.card_busy = _host->card_busy;
|
||||
tmio_mmc_ops.start_signal_voltage_switch = _host->start_signal_voltage_switch;
|
||||
mmc->ops = &tmio_mmc_ops;
|
||||
|
||||
|
|
Загрузка…
Ссылка в новой задаче