dt-bindings: net: ocelot: remove hsio from the list of register address spaces

HSIO register address space should be handled outside of the MAC
controller as there are some registers for PLL5 configuring,
SerDes/switch port muxing and a thermal sensor IP, so let's remove it.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/mips/mscc.txt

@@ -41,3 +41,19 @@ Example:
 		compatible = "mscc,ocelot-cpu-syscon", "syscon";
 		reg = <0x70000000 0x2c>;
 	};
+
+o HSIO regs:
+
+The SoC has a few registers (HSIO) handling miscellaneous functionalities:
+configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and
+status, SerDes muxing and a thermal sensor.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@10d0000 {
+		compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
+		reg = <0x10d0000 0x10000>;
+	};

Documentation/devicetree/bindings/net/mscc-ocelot.txt

@@ -12,7 +12,6 @@ Required properties:
   - "sys"
   - "rew"
   - "qs"
-  - "hsio"
   - "qsys"
   - "ana"
   - "portX" with X from 0 to the number of last port index available on that
@@ -45,7 +44,6 @@ Example:
 		reg = <0x1010000 0x10000>,
 		      <0x1030000 0x10000>,
 		      <0x1080000 0x100>,
-		      <0x10d0000 0x10000>,
 		      <0x11e0000 0x100>,
 		      <0x11f0000 0x100>,
 		      <0x1200000 0x100>,
@@ -59,10 +57,9 @@ Example:
 		      <0x1280000 0x100>,
 		      <0x1800000 0x80000>,
 		      <0x1880000 0x10000>;
-		reg-names = "sys", "rew", "qs", "hsio", "port0",
-			    "port1", "port2", "port3", "port4", "port5",
-			    "port6", "port7", "port8", "port9", "port10",
-			    "qsys", "ana";
+		reg-names = "sys", "rew", "qs", "port0", "port1", "port2",
+			    "port3", "port4", "port5", "port6", "port7",
+			    "port8", "port9", "port10", "qsys", "ana";
 		interrupts = <21 22>;
 		interrupt-names = "xtr", "inj";