spi: Add SPI master controller for OCTEON SOCs.
Add the driver, link it into the kbuild system and provide device tree binding documentation. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/4292/ Signed-off-by: John Crispin <blogic@openwrt.org>
This commit is contained in:
Родитель
95d585fc28
Коммит
6b52c00f2b
|
@ -0,0 +1,33 @@
|
|||
Cavium, Inc. OCTEON SOC SPI master controller.
|
||||
|
||||
Required properties:
|
||||
- compatible : "cavium,octeon-3010-spi"
|
||||
- reg : The register base for the controller.
|
||||
- interrupts : One interrupt, used by the controller.
|
||||
- #address-cells : <1>, as required by generic SPI binding.
|
||||
- #size-cells : <0>, also as required by generic SPI binding.
|
||||
|
||||
Child nodes as per the generic SPI binding.
|
||||
|
||||
Example:
|
||||
|
||||
spi@1070000001000 {
|
||||
compatible = "cavium,octeon-3010-spi";
|
||||
reg = <0x10700 0x00001000 0x0 0x100>;
|
||||
interrupts = <0 58>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eeprom@0 {
|
||||
compatible = "st,m95256", "atmel,at25";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <5000000>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
|
||||
pagesize = <64>;
|
||||
size = <32768>;
|
||||
address-width = <16>;
|
||||
};
|
||||
};
|
||||
|
|
@ -237,6 +237,13 @@ config SPI_OC_TINY
|
|||
help
|
||||
This is the driver for OpenCores tiny SPI master controller.
|
||||
|
||||
config SPI_OCTEON
|
||||
tristate "Cavium OCTEON SPI controller"
|
||||
depends on CPU_CAVIUM_OCTEON
|
||||
help
|
||||
SPI host driver for the hardware found on some Cavium OCTEON
|
||||
SOCs.
|
||||
|
||||
config SPI_OMAP_UWIRE
|
||||
tristate "OMAP1 MicroWire"
|
||||
depends on ARCH_OMAP1
|
||||
|
|
|
@ -38,6 +38,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
|
|||
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
|
||||
obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
|
||||
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
|
||||
obj-$(CONFIG_SPI_OCTEON) += spi-octeon.o
|
||||
obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o
|
||||
obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o
|
||||
obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o
|
||||
|
|
|
@ -0,0 +1,362 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2011, 2012 Cavium, Inc.
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
#include <asm/octeon/cvmx-mpi-defs.h>
|
||||
|
||||
#define OCTEON_SPI_CFG 0
|
||||
#define OCTEON_SPI_STS 0x08
|
||||
#define OCTEON_SPI_TX 0x10
|
||||
#define OCTEON_SPI_DAT0 0x80
|
||||
|
||||
#define OCTEON_SPI_MAX_BYTES 9
|
||||
|
||||
#define OCTEON_SPI_MAX_CLOCK_HZ 16000000
|
||||
|
||||
struct octeon_spi {
|
||||
struct spi_master *my_master;
|
||||
u64 register_base;
|
||||
u64 last_cfg;
|
||||
u64 cs_enax;
|
||||
};
|
||||
|
||||
struct octeon_spi_setup {
|
||||
u32 max_speed_hz;
|
||||
u8 chip_select;
|
||||
u8 mode;
|
||||
u8 bits_per_word;
|
||||
};
|
||||
|
||||
static void octeon_spi_wait_ready(struct octeon_spi *p)
|
||||
{
|
||||
union cvmx_mpi_sts mpi_sts;
|
||||
unsigned int loops = 0;
|
||||
|
||||
do {
|
||||
if (loops++)
|
||||
__delay(500);
|
||||
mpi_sts.u64 = cvmx_read_csr(p->register_base + OCTEON_SPI_STS);
|
||||
} while (mpi_sts.s.busy);
|
||||
}
|
||||
|
||||
static int octeon_spi_do_transfer(struct octeon_spi *p,
|
||||
struct spi_message *msg,
|
||||
struct spi_transfer *xfer,
|
||||
bool last_xfer)
|
||||
{
|
||||
union cvmx_mpi_cfg mpi_cfg;
|
||||
union cvmx_mpi_tx mpi_tx;
|
||||
unsigned int clkdiv;
|
||||
unsigned int speed_hz;
|
||||
int mode;
|
||||
bool cpha, cpol;
|
||||
int bits_per_word;
|
||||
const u8 *tx_buf;
|
||||
u8 *rx_buf;
|
||||
int len;
|
||||
int i;
|
||||
|
||||
struct octeon_spi_setup *msg_setup = spi_get_ctldata(msg->spi);
|
||||
|
||||
speed_hz = msg_setup->max_speed_hz;
|
||||
mode = msg_setup->mode;
|
||||
cpha = mode & SPI_CPHA;
|
||||
cpol = mode & SPI_CPOL;
|
||||
bits_per_word = msg_setup->bits_per_word;
|
||||
|
||||
if (xfer->speed_hz)
|
||||
speed_hz = xfer->speed_hz;
|
||||
if (xfer->bits_per_word)
|
||||
bits_per_word = xfer->bits_per_word;
|
||||
|
||||
if (speed_hz > OCTEON_SPI_MAX_CLOCK_HZ)
|
||||
speed_hz = OCTEON_SPI_MAX_CLOCK_HZ;
|
||||
|
||||
clkdiv = octeon_get_io_clock_rate() / (2 * speed_hz);
|
||||
|
||||
mpi_cfg.u64 = 0;
|
||||
|
||||
mpi_cfg.s.clkdiv = clkdiv;
|
||||
mpi_cfg.s.cshi = (mode & SPI_CS_HIGH) ? 1 : 0;
|
||||
mpi_cfg.s.lsbfirst = (mode & SPI_LSB_FIRST) ? 1 : 0;
|
||||
mpi_cfg.s.wireor = (mode & SPI_3WIRE) ? 1 : 0;
|
||||
mpi_cfg.s.idlelo = cpha != cpol;
|
||||
mpi_cfg.s.cslate = cpha ? 1 : 0;
|
||||
mpi_cfg.s.enable = 1;
|
||||
|
||||
if (msg_setup->chip_select < 4)
|
||||
p->cs_enax |= 1ull << (12 + msg_setup->chip_select);
|
||||
mpi_cfg.u64 |= p->cs_enax;
|
||||
|
||||
if (mpi_cfg.u64 != p->last_cfg) {
|
||||
p->last_cfg = mpi_cfg.u64;
|
||||
cvmx_write_csr(p->register_base + OCTEON_SPI_CFG, mpi_cfg.u64);
|
||||
}
|
||||
tx_buf = xfer->tx_buf;
|
||||
rx_buf = xfer->rx_buf;
|
||||
len = xfer->len;
|
||||
while (len > OCTEON_SPI_MAX_BYTES) {
|
||||
for (i = 0; i < OCTEON_SPI_MAX_BYTES; i++) {
|
||||
u8 d;
|
||||
if (tx_buf)
|
||||
d = *tx_buf++;
|
||||
else
|
||||
d = 0;
|
||||
cvmx_write_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i), d);
|
||||
}
|
||||
mpi_tx.u64 = 0;
|
||||
mpi_tx.s.csid = msg_setup->chip_select;
|
||||
mpi_tx.s.leavecs = 1;
|
||||
mpi_tx.s.txnum = tx_buf ? OCTEON_SPI_MAX_BYTES : 0;
|
||||
mpi_tx.s.totnum = OCTEON_SPI_MAX_BYTES;
|
||||
cvmx_write_csr(p->register_base + OCTEON_SPI_TX, mpi_tx.u64);
|
||||
|
||||
octeon_spi_wait_ready(p);
|
||||
if (rx_buf)
|
||||
for (i = 0; i < OCTEON_SPI_MAX_BYTES; i++) {
|
||||
u64 v = cvmx_read_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i));
|
||||
*rx_buf++ = (u8)v;
|
||||
}
|
||||
len -= OCTEON_SPI_MAX_BYTES;
|
||||
}
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
u8 d;
|
||||
if (tx_buf)
|
||||
d = *tx_buf++;
|
||||
else
|
||||
d = 0;
|
||||
cvmx_write_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i), d);
|
||||
}
|
||||
|
||||
mpi_tx.u64 = 0;
|
||||
mpi_tx.s.csid = msg_setup->chip_select;
|
||||
if (last_xfer)
|
||||
mpi_tx.s.leavecs = xfer->cs_change;
|
||||
else
|
||||
mpi_tx.s.leavecs = !xfer->cs_change;
|
||||
mpi_tx.s.txnum = tx_buf ? len : 0;
|
||||
mpi_tx.s.totnum = len;
|
||||
cvmx_write_csr(p->register_base + OCTEON_SPI_TX, mpi_tx.u64);
|
||||
|
||||
octeon_spi_wait_ready(p);
|
||||
if (rx_buf)
|
||||
for (i = 0; i < len; i++) {
|
||||
u64 v = cvmx_read_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i));
|
||||
*rx_buf++ = (u8)v;
|
||||
}
|
||||
|
||||
if (xfer->delay_usecs)
|
||||
udelay(xfer->delay_usecs);
|
||||
|
||||
return xfer->len;
|
||||
}
|
||||
|
||||
static int octeon_spi_validate_bpw(struct spi_device *spi, u32 speed)
|
||||
{
|
||||
switch (speed) {
|
||||
case 8:
|
||||
break;
|
||||
default:
|
||||
dev_err(&spi->dev, "Error: %d bits per word not supported\n",
|
||||
speed);
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int octeon_spi_transfer_one_message(struct spi_master *master,
|
||||
struct spi_message *msg)
|
||||
{
|
||||
struct octeon_spi *p = spi_master_get_devdata(master);
|
||||
unsigned int total_len = 0;
|
||||
int status = 0;
|
||||
struct spi_transfer *xfer;
|
||||
|
||||
/*
|
||||
* We better have set the configuration via a call to .setup
|
||||
* before we get here.
|
||||
*/
|
||||
if (spi_get_ctldata(msg->spi) == NULL) {
|
||||
status = -EINVAL;
|
||||
goto err;
|
||||
}
|
||||
|
||||
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
||||
if (xfer->bits_per_word) {
|
||||
status = octeon_spi_validate_bpw(msg->spi,
|
||||
xfer->bits_per_word);
|
||||
if (status)
|
||||
goto err;
|
||||
}
|
||||
}
|
||||
|
||||
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
||||
bool last_xfer = &xfer->transfer_list == msg->transfers.prev;
|
||||
int r = octeon_spi_do_transfer(p, msg, xfer, last_xfer);
|
||||
if (r < 0) {
|
||||
status = r;
|
||||
goto err;
|
||||
}
|
||||
total_len += r;
|
||||
}
|
||||
err:
|
||||
msg->status = status;
|
||||
msg->actual_length = total_len;
|
||||
spi_finalize_current_message(master);
|
||||
return status;
|
||||
}
|
||||
|
||||
static struct octeon_spi_setup *octeon_spi_new_setup(struct spi_device *spi)
|
||||
{
|
||||
struct octeon_spi_setup *setup = kzalloc(sizeof(*setup), GFP_KERNEL);
|
||||
if (!setup)
|
||||
return NULL;
|
||||
|
||||
setup->max_speed_hz = spi->max_speed_hz;
|
||||
setup->chip_select = spi->chip_select;
|
||||
setup->mode = spi->mode;
|
||||
setup->bits_per_word = spi->bits_per_word;
|
||||
return setup;
|
||||
}
|
||||
|
||||
static int octeon_spi_setup(struct spi_device *spi)
|
||||
{
|
||||
int r;
|
||||
struct octeon_spi_setup *new_setup;
|
||||
struct octeon_spi_setup *old_setup = spi_get_ctldata(spi);
|
||||
|
||||
r = octeon_spi_validate_bpw(spi, spi->bits_per_word);
|
||||
if (r)
|
||||
return r;
|
||||
|
||||
new_setup = octeon_spi_new_setup(spi);
|
||||
if (!new_setup)
|
||||
return -ENOMEM;
|
||||
|
||||
spi_set_ctldata(spi, new_setup);
|
||||
kfree(old_setup);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void octeon_spi_cleanup(struct spi_device *spi)
|
||||
{
|
||||
struct octeon_spi_setup *old_setup = spi_get_ctldata(spi);
|
||||
spi_set_ctldata(spi, NULL);
|
||||
kfree(old_setup);
|
||||
}
|
||||
|
||||
static int octeon_spi_nop_transfer_hardware(struct spi_master *master)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit octeon_spi_probe(struct platform_device *pdev)
|
||||
{
|
||||
|
||||
struct resource *res_mem;
|
||||
struct spi_master *master;
|
||||
struct octeon_spi *p;
|
||||
int err = -ENOENT;
|
||||
|
||||
master = spi_alloc_master(&pdev->dev, sizeof(struct octeon_spi));
|
||||
if (!master)
|
||||
return -ENOMEM;
|
||||
p = spi_master_get_devdata(master);
|
||||
platform_set_drvdata(pdev, p);
|
||||
p->my_master = master;
|
||||
|
||||
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
||||
if (res_mem == NULL) {
|
||||
dev_err(&pdev->dev, "found no memory resource\n");
|
||||
err = -ENXIO;
|
||||
goto fail;
|
||||
}
|
||||
if (!devm_request_mem_region(&pdev->dev, res_mem->start,
|
||||
resource_size(res_mem), res_mem->name)) {
|
||||
dev_err(&pdev->dev, "request_mem_region failed\n");
|
||||
goto fail;
|
||||
}
|
||||
p->register_base = (u64)devm_ioremap(&pdev->dev, res_mem->start,
|
||||
resource_size(res_mem));
|
||||
|
||||
/* Dynamic bus numbering */
|
||||
master->bus_num = -1;
|
||||
master->num_chipselect = 4;
|
||||
master->mode_bits = SPI_CPHA |
|
||||
SPI_CPOL |
|
||||
SPI_CS_HIGH |
|
||||
SPI_LSB_FIRST |
|
||||
SPI_3WIRE;
|
||||
|
||||
master->setup = octeon_spi_setup;
|
||||
master->cleanup = octeon_spi_cleanup;
|
||||
master->prepare_transfer_hardware = octeon_spi_nop_transfer_hardware;
|
||||
master->transfer_one_message = octeon_spi_transfer_one_message;
|
||||
master->unprepare_transfer_hardware = octeon_spi_nop_transfer_hardware;
|
||||
|
||||
master->dev.of_node = pdev->dev.of_node;
|
||||
err = spi_register_master(master);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "register master failed: %d\n", err);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
dev_info(&pdev->dev, "OCTEON SPI bus driver\n");
|
||||
|
||||
return 0;
|
||||
fail:
|
||||
spi_master_put(master);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit octeon_spi_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct octeon_spi *p = platform_get_drvdata(pdev);
|
||||
u64 register_base = p->register_base;
|
||||
|
||||
spi_unregister_master(p->my_master);
|
||||
|
||||
/* Clear the CSENA* and put everything in a known state. */
|
||||
cvmx_write_csr(register_base + OCTEON_SPI_CFG, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct of_device_id octeon_spi_match[] = {
|
||||
{ .compatible = "cavium,octeon-3010-spi", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, octeon_spi_match);
|
||||
|
||||
static struct platform_driver octeon_spi_driver = {
|
||||
.driver = {
|
||||
.name = "spi-octeon",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = octeon_spi_match,
|
||||
},
|
||||
.probe = octeon_spi_probe,
|
||||
.remove = __devexit_p(octeon_spi_remove),
|
||||
};
|
||||
|
||||
module_platform_driver(octeon_spi_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Cavium, Inc. OCTEON SPI bus driver");
|
||||
MODULE_AUTHOR("David Daney");
|
||||
MODULE_LICENSE("GPL");
|
Загрузка…
Ссылка в новой задаче