powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
This patch adds MDMA/UDMA support using BestComm for DMA on the MPC5200 platform. Based heavily on previous work by Freescale (Bernard Kuhn, John Rigby) and Domen Puncer. With this patch, a SanDisk Extreme IV CF card gets read speeds of approximately 26.70 MB/sec. Signed-off-by: Tim Yamin <plasm@roo.me.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Родитель
aaab5e83c2
Коммит
6b61e69e7b
|
@ -20,18 +20,11 @@ struct bcom_ata_bd {
|
|||
u32 dst_pa;
|
||||
};
|
||||
|
||||
extern struct bcom_task *
|
||||
bcom_ata_init(int queue_len, int maxbufsize);
|
||||
|
||||
extern void
|
||||
bcom_ata_rx_prepare(struct bcom_task *tsk);
|
||||
|
||||
extern void
|
||||
bcom_ata_tx_prepare(struct bcom_task *tsk);
|
||||
|
||||
extern void
|
||||
bcom_ata_reset_bd(struct bcom_task *tsk);
|
||||
|
||||
extern struct bcom_task * bcom_ata_init(int queue_len, int maxbufsize);
|
||||
extern void bcom_ata_rx_prepare(struct bcom_task *tsk);
|
||||
extern void bcom_ata_tx_prepare(struct bcom_task *tsk);
|
||||
extern void bcom_ata_reset_bd(struct bcom_task *tsk);
|
||||
extern void bcom_ata_release(struct bcom_task *tsk);
|
||||
|
||||
#endif /* __BESTCOMM_ATA_H__ */
|
||||
|
||||
|
|
|
@ -456,7 +456,8 @@ config PATA_MARVELL
|
|||
|
||||
config PATA_MPC52xx
|
||||
tristate "Freescale MPC52xx SoC internal IDE"
|
||||
depends on PPC_MPC52xx
|
||||
depends on PPC_MPC52xx && PPC_BESTCOMM
|
||||
select PPC_BESTCOMM_ATA
|
||||
help
|
||||
This option enables support for integrated IDE controller
|
||||
of the Freescale MPC52xx SoC.
|
||||
|
|
|
@ -6,6 +6,9 @@
|
|||
* Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
|
||||
* Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt
|
||||
*
|
||||
* UDMA support based on patches by Freescale (Bernard Kuhn, John Rigby),
|
||||
* Domen Puncer and Tim Yamin.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
|
@ -17,28 +20,46 @@
|
|||
#include <linux/delay.h>
|
||||
#include <linux/libata.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/types.h>
|
||||
#include <asm/cacheflush.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/mpc52xx.h>
|
||||
|
||||
#include <sysdev/bestcomm/bestcomm.h>
|
||||
#include <sysdev/bestcomm/bestcomm_priv.h>
|
||||
#include <sysdev/bestcomm/ata.h>
|
||||
|
||||
#define DRV_NAME "mpc52xx_ata"
|
||||
#define DRV_VERSION "0.1.2"
|
||||
|
||||
|
||||
/* Private structures used by the driver */
|
||||
struct mpc52xx_ata_timings {
|
||||
u32 pio1;
|
||||
u32 pio2;
|
||||
u32 mdma1;
|
||||
u32 mdma2;
|
||||
u32 udma1;
|
||||
u32 udma2;
|
||||
u32 udma3;
|
||||
u32 udma4;
|
||||
u32 udma5;
|
||||
int using_udma;
|
||||
};
|
||||
|
||||
struct mpc52xx_ata_priv {
|
||||
unsigned int ipb_period;
|
||||
struct mpc52xx_ata __iomem * ata_regs;
|
||||
struct mpc52xx_ata __iomem *ata_regs;
|
||||
phys_addr_t ata_regs_pa;
|
||||
int ata_irq;
|
||||
struct mpc52xx_ata_timings timings[2];
|
||||
int csel;
|
||||
|
||||
/* DMA */
|
||||
struct bcom_task *dmatsk;
|
||||
const struct udmaspec *udmaspec;
|
||||
const struct mdmaspec *mdmaspec;
|
||||
int mpc52xx_ata_dma_last_write;
|
||||
int waiting_for_dma;
|
||||
};
|
||||
|
||||
|
||||
|
@ -53,6 +74,107 @@ static const int ataspec_ta[5] = { 35, 35, 35, 35, 35};
|
|||
|
||||
#define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c)))
|
||||
|
||||
/* ======================================================================== */
|
||||
|
||||
/* ATAPI-4 MDMA specs (in clocks) */
|
||||
struct mdmaspec {
|
||||
u32 t0M;
|
||||
u32 td;
|
||||
u32 th;
|
||||
u32 tj;
|
||||
u32 tkw;
|
||||
u32 tm;
|
||||
u32 tn;
|
||||
};
|
||||
|
||||
static const struct mdmaspec mdmaspec66[3] = {
|
||||
{ .t0M = 32, .td = 15, .th = 2, .tj = 2, .tkw = 15, .tm = 4, .tn = 1 },
|
||||
{ .t0M = 10, .td = 6, .th = 1, .tj = 1, .tkw = 4, .tm = 2, .tn = 1 },
|
||||
{ .t0M = 8, .td = 5, .th = 1, .tj = 1, .tkw = 2, .tm = 2, .tn = 1 },
|
||||
};
|
||||
|
||||
static const struct mdmaspec mdmaspec132[3] = {
|
||||
{ .t0M = 64, .td = 29, .th = 3, .tj = 3, .tkw = 29, .tm = 7, .tn = 2 },
|
||||
{ .t0M = 20, .td = 11, .th = 2, .tj = 1, .tkw = 7, .tm = 4, .tn = 1 },
|
||||
{ .t0M = 16, .td = 10, .th = 2, .tj = 1, .tkw = 4, .tm = 4, .tn = 1 },
|
||||
};
|
||||
|
||||
/* ATAPI-4 UDMA specs (in clocks) */
|
||||
struct udmaspec {
|
||||
u32 tcyc;
|
||||
u32 t2cyc;
|
||||
u32 tds;
|
||||
u32 tdh;
|
||||
u32 tdvs;
|
||||
u32 tdvh;
|
||||
u32 tfs;
|
||||
u32 tli;
|
||||
u32 tmli;
|
||||
u32 taz;
|
||||
u32 tzah;
|
||||
u32 tenv;
|
||||
u32 tsr;
|
||||
u32 trfs;
|
||||
u32 trp;
|
||||
u32 tack;
|
||||
u32 tss;
|
||||
};
|
||||
|
||||
static const struct udmaspec udmaspec66[6] = {
|
||||
{ .tcyc = 8, .t2cyc = 16, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1,
|
||||
.tfs = 16, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2,
|
||||
.tsr = 3, .trfs = 5, .trp = 11, .tack = 2, .tss = 4,
|
||||
},
|
||||
{ .tcyc = 5, .t2cyc = 11, .tds = 1, .tdh = 1, .tdvs = 4, .tdvh = 1,
|
||||
.tfs = 14, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2,
|
||||
.tsr = 2, .trfs = 5, .trp = 9, .tack = 2, .tss = 4,
|
||||
},
|
||||
{ .tcyc = 4, .t2cyc = 8, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1,
|
||||
.tfs = 12, .tli = 10, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2,
|
||||
.tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4,
|
||||
},
|
||||
{ .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 2, .tdvh = 1,
|
||||
.tfs = 9, .tli = 7, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2,
|
||||
.tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4,
|
||||
},
|
||||
{ .tcyc = 2, .t2cyc = 4, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1,
|
||||
.tfs = 8, .tli = 8, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2,
|
||||
.tsr = 2, .trfs = 4, .trp = 7, .tack = 2, .tss = 4,
|
||||
},
|
||||
{ .tcyc = 2, .t2cyc = 2, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1,
|
||||
.tfs = 6, .tli = 5, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2,
|
||||
.tsr = 2, .trfs = 4, .trp = 6, .tack = 2, .tss = 4,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct udmaspec udmaspec132[6] = {
|
||||
{ .tcyc = 15, .t2cyc = 31, .tds = 2, .tdh = 1, .tdvs = 10, .tdvh = 1,
|
||||
.tfs = 30, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3,
|
||||
.tsr = 7, .trfs = 10, .trp = 22, .tack = 3, .tss = 7,
|
||||
},
|
||||
{ .tcyc = 10, .t2cyc = 21, .tds = 2, .tdh = 1, .tdvs = 7, .tdvh = 1,
|
||||
.tfs = 27, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3,
|
||||
.tsr = 4, .trfs = 10, .trp = 17, .tack = 3, .tss = 7,
|
||||
},
|
||||
{ .tcyc = 6, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 5, .tdvh = 1,
|
||||
.tfs = 23, .tli = 20, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3,
|
||||
.tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7,
|
||||
},
|
||||
{ .tcyc = 7, .t2cyc = 12, .tds = 1, .tdh = 1, .tdvs = 3, .tdvh = 1,
|
||||
.tfs = 15, .tli = 13, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3,
|
||||
.tsr = 3, .trfs = 8, .trp = 14, .tack = 3, .tss = 7,
|
||||
},
|
||||
{ .tcyc = 2, .t2cyc = 5, .tds = 0, .tdh = 0, .tdvs = 1, .tdvh = 1,
|
||||
.tfs = 16, .tli = 14, .tmli = 2, .taz = 1, .tzah = 2, .tenv = 2,
|
||||
.tsr = 2, .trfs = 7, .trp = 13, .tack = 2, .tss = 6,
|
||||
},
|
||||
{ .tcyc = 3, .t2cyc = 6, .tds = 1, .tdh = 1, .tdvs = 1, .tdvh = 1,
|
||||
.tfs = 12, .tli = 10, .tmli = 3, .taz = 2, .tzah = 3, .tenv = 3,
|
||||
.tsr = 3, .trfs = 7, .trp = 12, .tack = 3, .tss = 7,
|
||||
},
|
||||
};
|
||||
|
||||
/* ======================================================================== */
|
||||
|
||||
/* Bit definitions inside the registers */
|
||||
#define MPC52xx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine reset */
|
||||
|
@ -66,6 +188,7 @@ static const int ataspec_ta[5] = { 35, 35, 35, 35, 35};
|
|||
#define MPC52xx_ATA_HOSTSTAT_WERR 0x01000000UL /* Write Error */
|
||||
|
||||
#define MPC52xx_ATA_FIFOSTAT_EMPTY 0x01 /* FIFO Empty */
|
||||
#define MPC52xx_ATA_FIFOSTAT_ERROR 0x40 /* FIFO Error */
|
||||
|
||||
#define MPC52xx_ATA_DMAMODE_WRITE 0x01 /* Write DMA */
|
||||
#define MPC52xx_ATA_DMAMODE_READ 0x02 /* Read DMA */
|
||||
|
@ -75,6 +198,8 @@ static const int ataspec_ta[5] = { 35, 35, 35, 35, 35};
|
|||
#define MPC52xx_ATA_DMAMODE_FR 0x20 /* FIFO Reset */
|
||||
#define MPC52xx_ATA_DMAMODE_HUT 0x40 /* Host UDMA burst terminate */
|
||||
|
||||
#define MAX_DMA_BUFFERS 128
|
||||
#define MAX_DMA_BUFFER_SIZE 0x20000u
|
||||
|
||||
/* Structure of the hardware registers */
|
||||
struct mpc52xx_ata {
|
||||
|
@ -140,7 +265,6 @@ struct mpc52xx_ata {
|
|||
|
||||
|
||||
/* MPC52xx low level hw control */
|
||||
|
||||
static int
|
||||
mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio)
|
||||
{
|
||||
|
@ -148,7 +272,7 @@ mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio)
|
|||
unsigned int ipb_period = priv->ipb_period;
|
||||
unsigned int t0, t1, t2_8, t2_16, t2i, t4, ta;
|
||||
|
||||
if ((pio<0) || (pio>4))
|
||||
if ((pio < 0) || (pio > 4))
|
||||
return -EINVAL;
|
||||
|
||||
t0 = CALC_CLKCYC(ipb_period, 1000 * ataspec_t0[pio]);
|
||||
|
@ -165,6 +289,43 @@ mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
mpc52xx_ata_compute_mdma_timings(struct mpc52xx_ata_priv *priv, int dev,
|
||||
int speed)
|
||||
{
|
||||
struct mpc52xx_ata_timings *t = &priv->timings[dev];
|
||||
const struct mdmaspec *s = &priv->mdmaspec[speed];
|
||||
|
||||
if (speed < 0 || speed > 2)
|
||||
return -EINVAL;
|
||||
|
||||
t->mdma1 = (s->t0M << 24) | (s->td << 16) | (s->tkw << 8) | (s->tm);
|
||||
t->mdma2 = (s->th << 24) | (s->tj << 16) | (s->tn << 8);
|
||||
t->using_udma = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
mpc52xx_ata_compute_udma_timings(struct mpc52xx_ata_priv *priv, int dev,
|
||||
int speed)
|
||||
{
|
||||
struct mpc52xx_ata_timings *t = &priv->timings[dev];
|
||||
const struct udmaspec *s = &priv->udmaspec[speed];
|
||||
|
||||
if (speed < 0 || speed > 2)
|
||||
return -EINVAL;
|
||||
|
||||
t->udma1 = (s->t2cyc << 24) | (s->tcyc << 16) | (s->tds << 8) | s->tdh;
|
||||
t->udma2 = (s->tdvs << 24) | (s->tdvh << 16) | (s->tfs << 8) | s->tli;
|
||||
t->udma3 = (s->tmli << 24) | (s->taz << 16) | (s->tenv << 8) | s->tsr;
|
||||
t->udma4 = (s->tss << 24) | (s->trfs << 16) | (s->trp << 8) | s->tack;
|
||||
t->udma5 = (s->tzah << 24);
|
||||
t->using_udma = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device)
|
||||
{
|
||||
|
@ -173,14 +334,13 @@ mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv *priv, int device)
|
|||
|
||||
out_be32(®s->pio1, timing->pio1);
|
||||
out_be32(®s->pio2, timing->pio2);
|
||||
out_be32(®s->mdma1, 0);
|
||||
out_be32(®s->mdma2, 0);
|
||||
out_be32(®s->udma1, 0);
|
||||
out_be32(®s->udma2, 0);
|
||||
out_be32(®s->udma3, 0);
|
||||
out_be32(®s->udma4, 0);
|
||||
out_be32(®s->udma5, 0);
|
||||
|
||||
out_be32(®s->mdma1, timing->mdma1);
|
||||
out_be32(®s->mdma2, timing->mdma2);
|
||||
out_be32(®s->udma1, timing->udma1);
|
||||
out_be32(®s->udma2, timing->udma2);
|
||||
out_be32(®s->udma3, timing->udma3);
|
||||
out_be32(®s->udma4, timing->udma4);
|
||||
out_be32(®s->udma5, timing->udma5);
|
||||
priv->csel = device;
|
||||
}
|
||||
|
||||
|
@ -208,7 +368,7 @@ mpc52xx_ata_hw_init(struct mpc52xx_ata_priv *priv)
|
|||
|
||||
/* Set the time slot to 1us */
|
||||
tslot = CALC_CLKCYC(priv->ipb_period, 1000000);
|
||||
out_be32(®s->share_cnt, tslot << 16 );
|
||||
out_be32(®s->share_cnt, tslot << 16);
|
||||
|
||||
/* Init timings to PIO0 */
|
||||
memset(priv->timings, 0x00, 2*sizeof(struct mpc52xx_ata_timings));
|
||||
|
@ -237,13 +397,37 @@ mpc52xx_ata_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|||
rv = mpc52xx_ata_compute_pio_timings(priv, adev->devno, pio);
|
||||
|
||||
if (rv) {
|
||||
printk(KERN_ERR DRV_NAME
|
||||
": Trying to select invalid PIO mode %d\n", pio);
|
||||
dev_err(ap->dev, "error: invalid PIO mode: %d\n", pio);
|
||||
return;
|
||||
}
|
||||
|
||||
mpc52xx_ata_apply_timings(priv, adev->devno);
|
||||
}
|
||||
|
||||
static void
|
||||
mpc52xx_ata_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
||||
{
|
||||
struct mpc52xx_ata_priv *priv = ap->host->private_data;
|
||||
int rv;
|
||||
|
||||
if (adev->dma_mode >= XFER_UDMA_0) {
|
||||
int dma = adev->dma_mode - XFER_UDMA_0;
|
||||
rv = mpc52xx_ata_compute_udma_timings(priv, adev->devno, dma);
|
||||
} else {
|
||||
int dma = adev->dma_mode - XFER_MW_DMA_0;
|
||||
rv = mpc52xx_ata_compute_mdma_timings(priv, adev->devno, dma);
|
||||
}
|
||||
|
||||
if (rv) {
|
||||
dev_alert(ap->dev,
|
||||
"Trying to select invalid DMA mode %d\n",
|
||||
adev->dma_mode);
|
||||
return;
|
||||
}
|
||||
|
||||
mpc52xx_ata_apply_timings(priv, adev->devno);
|
||||
}
|
||||
|
||||
static void
|
||||
mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device)
|
||||
{
|
||||
|
@ -252,7 +436,173 @@ mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device)
|
|||
if (device != priv->csel)
|
||||
mpc52xx_ata_apply_timings(priv, device);
|
||||
|
||||
ata_sff_dev_select(ap,device);
|
||||
ata_sff_dev_select(ap, device);
|
||||
}
|
||||
|
||||
static int
|
||||
mpc52xx_ata_build_dmatable(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
struct mpc52xx_ata_priv *priv = ap->host->private_data;
|
||||
struct bcom_ata_bd *bd;
|
||||
unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE), si;
|
||||
struct scatterlist *sg;
|
||||
int count = 0;
|
||||
|
||||
if (read)
|
||||
bcom_ata_rx_prepare(priv->dmatsk);
|
||||
else
|
||||
bcom_ata_tx_prepare(priv->dmatsk);
|
||||
|
||||
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
||||
dma_addr_t cur_addr = sg_dma_address(sg);
|
||||
u32 cur_len = sg_dma_len(sg);
|
||||
|
||||
while (cur_len) {
|
||||
unsigned int tc = min(cur_len, MAX_DMA_BUFFER_SIZE);
|
||||
bd = (struct bcom_ata_bd *)
|
||||
bcom_prepare_next_buffer(priv->dmatsk);
|
||||
|
||||
if (read) {
|
||||
bd->status = tc;
|
||||
bd->src_pa = (__force u32) priv->ata_regs_pa +
|
||||
offsetof(struct mpc52xx_ata, fifo_data);
|
||||
bd->dst_pa = (__force u32) cur_addr;
|
||||
} else {
|
||||
bd->status = tc;
|
||||
bd->src_pa = (__force u32) cur_addr;
|
||||
bd->dst_pa = (__force u32) priv->ata_regs_pa +
|
||||
offsetof(struct mpc52xx_ata, fifo_data);
|
||||
}
|
||||
|
||||
bcom_submit_next_buffer(priv->dmatsk, NULL);
|
||||
|
||||
cur_addr += tc;
|
||||
cur_len -= tc;
|
||||
count++;
|
||||
|
||||
if (count > MAX_DMA_BUFFERS) {
|
||||
dev_alert(ap->dev, "dma table"
|
||||
"too small\n");
|
||||
goto use_pio_instead;
|
||||
}
|
||||
}
|
||||
}
|
||||
return 1;
|
||||
|
||||
use_pio_instead:
|
||||
bcom_ata_reset_bd(priv->dmatsk);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
mpc52xx_bmdma_setup(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
struct mpc52xx_ata_priv *priv = ap->host->private_data;
|
||||
struct mpc52xx_ata __iomem *regs = priv->ata_regs;
|
||||
|
||||
unsigned int read = !(qc->tf.flags & ATA_TFLAG_WRITE);
|
||||
u8 dma_mode;
|
||||
|
||||
if (!mpc52xx_ata_build_dmatable(qc))
|
||||
dev_alert(ap->dev, "%s: %i, return 1?\n",
|
||||
__func__, __LINE__);
|
||||
|
||||
/* Check FIFO is OK... */
|
||||
if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR)
|
||||
dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n",
|
||||
__func__, in_8(&priv->ata_regs->fifo_status));
|
||||
|
||||
if (read) {
|
||||
dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_READ |
|
||||
MPC52xx_ATA_DMAMODE_FE;
|
||||
|
||||
/* Setup FIFO if direction changed */
|
||||
if (priv->mpc52xx_ata_dma_last_write != 0) {
|
||||
priv->mpc52xx_ata_dma_last_write = 0;
|
||||
|
||||
/* Configure FIFO with granularity to 7 */
|
||||
out_8(®s->fifo_control, 7);
|
||||
out_be16(®s->fifo_alarm, 128);
|
||||
|
||||
/* Set FIFO Reset bit (FR) */
|
||||
out_8(®s->dma_mode, MPC52xx_ATA_DMAMODE_FR);
|
||||
}
|
||||
} else {
|
||||
dma_mode = MPC52xx_ATA_DMAMODE_IE | MPC52xx_ATA_DMAMODE_WRITE;
|
||||
|
||||
/* Setup FIFO if direction changed */
|
||||
if (priv->mpc52xx_ata_dma_last_write != 1) {
|
||||
priv->mpc52xx_ata_dma_last_write = 1;
|
||||
|
||||
/* Configure FIFO with granularity to 4 */
|
||||
out_8(®s->fifo_control, 4);
|
||||
out_be16(®s->fifo_alarm, 128);
|
||||
}
|
||||
}
|
||||
|
||||
if (priv->timings[qc->dev->devno].using_udma)
|
||||
dma_mode |= MPC52xx_ATA_DMAMODE_UDMA;
|
||||
|
||||
out_8(®s->dma_mode, dma_mode);
|
||||
priv->waiting_for_dma = ATA_DMA_ACTIVE;
|
||||
|
||||
ata_wait_idle(ap);
|
||||
ap->ops->sff_exec_command(ap, &qc->tf);
|
||||
}
|
||||
|
||||
static void
|
||||
mpc52xx_bmdma_start(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
struct mpc52xx_ata_priv *priv = ap->host->private_data;
|
||||
|
||||
bcom_set_task_auto_start(priv->dmatsk->tasknum, priv->dmatsk->tasknum);
|
||||
bcom_enable(priv->dmatsk);
|
||||
}
|
||||
|
||||
static void
|
||||
mpc52xx_bmdma_stop(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
struct mpc52xx_ata_priv *priv = ap->host->private_data;
|
||||
|
||||
bcom_disable(priv->dmatsk);
|
||||
bcom_ata_reset_bd(priv->dmatsk);
|
||||
priv->waiting_for_dma = 0;
|
||||
|
||||
/* Check FIFO is OK... */
|
||||
if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR)
|
||||
dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n",
|
||||
__func__, in_8(&priv->ata_regs->fifo_status));
|
||||
}
|
||||
|
||||
static u8
|
||||
mpc52xx_bmdma_status(struct ata_port *ap)
|
||||
{
|
||||
struct mpc52xx_ata_priv *priv = ap->host->private_data;
|
||||
|
||||
/* Check FIFO is OK... */
|
||||
if (in_8(&priv->ata_regs->fifo_status) & MPC52xx_ATA_FIFOSTAT_ERROR) {
|
||||
dev_alert(ap->dev, "%s: FIFO error detected: 0x%02x!\n",
|
||||
__func__, in_8(&priv->ata_regs->fifo_status));
|
||||
return priv->waiting_for_dma | ATA_DMA_ERR;
|
||||
}
|
||||
|
||||
return priv->waiting_for_dma;
|
||||
}
|
||||
|
||||
static irqreturn_t
|
||||
mpc52xx_ata_task_irq(int irq, void *vpriv)
|
||||
{
|
||||
struct mpc52xx_ata_priv *priv = vpriv;
|
||||
while (bcom_buffer_done(priv->dmatsk))
|
||||
bcom_retrieve_buffer(priv->dmatsk, NULL, NULL);
|
||||
|
||||
priv->waiting_for_dma |= ATA_DMA_INTR;
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct scsi_host_template mpc52xx_ata_sht = {
|
||||
|
@ -262,14 +612,18 @@ static struct scsi_host_template mpc52xx_ata_sht = {
|
|||
static struct ata_port_operations mpc52xx_ata_port_ops = {
|
||||
.inherits = &ata_sff_port_ops,
|
||||
.sff_dev_select = mpc52xx_ata_dev_select,
|
||||
.cable_detect = ata_cable_40wire,
|
||||
.set_piomode = mpc52xx_ata_set_piomode,
|
||||
.post_internal_cmd = ATA_OP_NULL,
|
||||
.set_dmamode = mpc52xx_ata_set_dmamode,
|
||||
.bmdma_setup = mpc52xx_bmdma_setup,
|
||||
.bmdma_start = mpc52xx_bmdma_start,
|
||||
.bmdma_stop = mpc52xx_bmdma_stop,
|
||||
.bmdma_status = mpc52xx_bmdma_status,
|
||||
.qc_prep = ata_noop_qc_prep,
|
||||
};
|
||||
|
||||
static int __devinit
|
||||
mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
|
||||
unsigned long raw_ata_regs)
|
||||
unsigned long raw_ata_regs, int mwdma_mask, int udma_mask)
|
||||
{
|
||||
struct ata_host *host;
|
||||
struct ata_port *ap;
|
||||
|
@ -281,9 +635,9 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
|
|||
|
||||
ap = host->ports[0];
|
||||
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
||||
ap->pio_mask = 0x1f; /* Up to PIO4 */
|
||||
ap->mwdma_mask = 0x00; /* No MWDMA */
|
||||
ap->udma_mask = 0x00; /* No UDMA */
|
||||
ap->pio_mask = ATA_PIO4;
|
||||
ap->mwdma_mask = mwdma_mask;
|
||||
ap->udma_mask = udma_mask;
|
||||
ap->ops = &mpc52xx_ata_port_ops;
|
||||
host->private_data = priv;
|
||||
|
||||
|
@ -330,89 +684,139 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
|
|||
{
|
||||
unsigned int ipb_freq;
|
||||
struct resource res_mem;
|
||||
int ata_irq;
|
||||
int ata_irq = 0;
|
||||
struct mpc52xx_ata __iomem *ata_regs;
|
||||
struct mpc52xx_ata_priv *priv;
|
||||
int rv;
|
||||
struct mpc52xx_ata_priv *priv = NULL;
|
||||
int rv, ret, task_irq = 0;
|
||||
int mwdma_mask = 0, udma_mask = 0;
|
||||
const __be32 *prop;
|
||||
int proplen;
|
||||
struct bcom_task *dmatsk = NULL;
|
||||
|
||||
/* Get ipb frequency */
|
||||
ipb_freq = mpc52xx_find_ipb_freq(op->node);
|
||||
if (!ipb_freq) {
|
||||
printk(KERN_ERR DRV_NAME ": "
|
||||
"Unable to find IPB Bus frequency\n" );
|
||||
dev_err(&op->dev, "could not determine IPB bus frequency\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Get IRQ and register */
|
||||
/* Get device base address from device tree, request the region
|
||||
* and ioremap it. */
|
||||
rv = of_address_to_resource(op->node, 0, &res_mem);
|
||||
if (rv) {
|
||||
printk(KERN_ERR DRV_NAME ": "
|
||||
"Error while parsing device node resource\n" );
|
||||
dev_err(&op->dev, "could not determine device base address\n");
|
||||
return rv;
|
||||
}
|
||||
|
||||
ata_irq = irq_of_parse_and_map(op->node, 0);
|
||||
if (ata_irq == NO_IRQ) {
|
||||
printk(KERN_ERR DRV_NAME ": "
|
||||
"Error while mapping the irq\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Request mem region */
|
||||
if (!devm_request_mem_region(&op->dev, res_mem.start,
|
||||
sizeof(struct mpc52xx_ata), DRV_NAME)) {
|
||||
printk(KERN_ERR DRV_NAME ": "
|
||||
"Error while requesting mem region\n");
|
||||
rv = -EBUSY;
|
||||
goto err;
|
||||
sizeof(*ata_regs), DRV_NAME)) {
|
||||
dev_err(&op->dev, "error requesting register region\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
/* Remap registers */
|
||||
ata_regs = devm_ioremap(&op->dev, res_mem.start,
|
||||
sizeof(struct mpc52xx_ata));
|
||||
ata_regs = devm_ioremap(&op->dev, res_mem.start, sizeof(*ata_regs));
|
||||
if (!ata_regs) {
|
||||
printk(KERN_ERR DRV_NAME ": "
|
||||
"Error while mapping register set\n");
|
||||
dev_err(&op->dev, "error mapping device registers\n");
|
||||
rv = -ENOMEM;
|
||||
goto err;
|
||||
}
|
||||
|
||||
/*
|
||||
* By default, all DMA modes are disabled for the MPC5200. Some
|
||||
* boards don't have the required signals routed to make DMA work.
|
||||
* Also, the MPC5200B has a silicon bug that causes data corruption
|
||||
* with UDMA if it is used at the same time as the LocalPlus bus.
|
||||
*
|
||||
* Instead of trying to guess what modes are usable, check the
|
||||
* ATA device tree node to find out what DMA modes work on the board.
|
||||
* UDMA/MWDMA modes can also be forced by adding "libata.force=<mode>"
|
||||
* to the kernel boot parameters.
|
||||
*
|
||||
* The MPC5200 ATA controller supports MWDMA modes 0, 1 and 2 and
|
||||
* UDMA modes 0, 1 and 2.
|
||||
*/
|
||||
prop = of_get_property(op->node, "mwdma-mode", &proplen);
|
||||
if ((prop) && (proplen >= 4))
|
||||
mwdma_mask = 0x7 & ((1 << (*prop + 1)) - 1);
|
||||
prop = of_get_property(op->node, "udma-mode", &proplen);
|
||||
if ((prop) && (proplen >= 4))
|
||||
udma_mask = 0x7 & ((1 << (*prop + 1)) - 1);
|
||||
|
||||
ata_irq = irq_of_parse_and_map(op->node, 0);
|
||||
if (ata_irq == NO_IRQ) {
|
||||
dev_err(&op->dev, "error mapping irq\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Prepare our private structure */
|
||||
priv = devm_kzalloc(&op->dev, sizeof(struct mpc52xx_ata_priv),
|
||||
GFP_ATOMIC);
|
||||
priv = devm_kzalloc(&op->dev, sizeof(*priv), GFP_ATOMIC);
|
||||
if (!priv) {
|
||||
printk(KERN_ERR DRV_NAME ": "
|
||||
"Error while allocating private structure\n");
|
||||
dev_err(&op->dev, "error allocating private structure\n");
|
||||
rv = -ENOMEM;
|
||||
goto err;
|
||||
}
|
||||
|
||||
priv->ipb_period = 1000000000 / (ipb_freq / 1000);
|
||||
priv->ata_regs = ata_regs;
|
||||
priv->ata_regs_pa = res_mem.start;
|
||||
priv->ata_irq = ata_irq;
|
||||
priv->csel = -1;
|
||||
priv->mpc52xx_ata_dma_last_write = -1;
|
||||
|
||||
if (ipb_freq/1000000 == 66) {
|
||||
priv->mdmaspec = mdmaspec66;
|
||||
priv->udmaspec = udmaspec66;
|
||||
} else {
|
||||
priv->mdmaspec = mdmaspec132;
|
||||
priv->udmaspec = udmaspec132;
|
||||
}
|
||||
|
||||
/* Allocate a BestComm task for DMA */
|
||||
dmatsk = bcom_ata_init(MAX_DMA_BUFFERS, MAX_DMA_BUFFER_SIZE);
|
||||
if (!dmatsk) {
|
||||
dev_err(&op->dev, "bestcomm initialization failed\n");
|
||||
rv = -ENOMEM;
|
||||
goto err;
|
||||
}
|
||||
|
||||
task_irq = bcom_get_task_irq(dmatsk);
|
||||
ret = request_irq(task_irq, &mpc52xx_ata_task_irq, IRQF_DISABLED,
|
||||
"ATA task", priv);
|
||||
if (ret) {
|
||||
dev_err(&op->dev, "error requesting DMA IRQ\n");
|
||||
goto err;
|
||||
}
|
||||
priv->dmatsk = dmatsk;
|
||||
|
||||
/* Init the hw */
|
||||
rv = mpc52xx_ata_hw_init(priv);
|
||||
if (rv) {
|
||||
printk(KERN_ERR DRV_NAME ": Error during HW init\n");
|
||||
dev_err(&op->dev, "error initializing hardware\n");
|
||||
goto err;
|
||||
}
|
||||
|
||||
/* Register ourselves to libata */
|
||||
rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start);
|
||||
rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start,
|
||||
mwdma_mask, udma_mask);
|
||||
if (rv) {
|
||||
printk(KERN_ERR DRV_NAME ": "
|
||||
"Error while registering to ATA layer\n");
|
||||
return rv;
|
||||
dev_err(&op->dev, "error registering with ATA layer\n");
|
||||
goto err;
|
||||
}
|
||||
|
||||
/* Done */
|
||||
return 0;
|
||||
|
||||
/* Error path */
|
||||
err:
|
||||
irq_dispose_mapping(ata_irq);
|
||||
err:
|
||||
devm_release_mem_region(&op->dev, res_mem.start, sizeof(*ata_regs));
|
||||
if (ata_irq)
|
||||
irq_dispose_mapping(ata_irq);
|
||||
if (task_irq)
|
||||
irq_dispose_mapping(task_irq);
|
||||
if (dmatsk)
|
||||
bcom_ata_release(dmatsk);
|
||||
if (ata_regs)
|
||||
devm_iounmap(&op->dev, ata_regs);
|
||||
if (priv)
|
||||
devm_kfree(&op->dev, priv);
|
||||
return rv;
|
||||
}
|
||||
|
||||
|
@ -420,10 +824,23 @@ static int
|
|||
mpc52xx_ata_remove(struct of_device *op)
|
||||
{
|
||||
struct mpc52xx_ata_priv *priv;
|
||||
int task_irq;
|
||||
|
||||
/* Deregister the ATA interface */
|
||||
priv = mpc52xx_ata_remove_one(&op->dev);
|
||||
|
||||
/* Clean up DMA */
|
||||
task_irq = bcom_get_task_irq(priv->dmatsk);
|
||||
irq_dispose_mapping(task_irq);
|
||||
bcom_ata_release(priv->dmatsk);
|
||||
irq_dispose_mapping(priv->ata_irq);
|
||||
|
||||
/* Clear up IO allocations */
|
||||
devm_iounmap(&op->dev, priv->ata_regs);
|
||||
devm_release_mem_region(&op->dev, priv->ata_regs_pa,
|
||||
sizeof(*priv->ata_regs));
|
||||
devm_kfree(&op->dev, priv);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -447,7 +864,7 @@ mpc52xx_ata_resume(struct of_device *op)
|
|||
|
||||
rv = mpc52xx_ata_hw_init(priv);
|
||||
if (rv) {
|
||||
printk(KERN_ERR DRV_NAME ": Error during HW init\n");
|
||||
dev_err(host->dev, "error initializing hardware\n");
|
||||
return rv;
|
||||
}
|
||||
|
||||
|
@ -507,5 +924,4 @@ MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
|
|||
MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DEVICE_TABLE(of, mpc52xx_ata_of_match);
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
|
|
Загрузка…
Ссылка в новой задаче