* limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt
  to program PIO5 by config_art_rwp_pio() could result in incorrect PIO
  timings being programmed and possibly the data corruption (for < ATA100
  family chipsets PIO0 timings were used, for ATA100 and ATA100a - the random
  content of test1 variable was used, for ATA133 - MWDMA0 timings were used)

* BUG() in sis5513_tune_chipset() if somebody tries to force unsupported PIO5,
  also cleanup this function a bit while at it

* add comment about PIO0 timings for < ATA100 family chipsets

* remove open-coded best PIO mode selection from config_art_rwp_pio(),
  it contained numerous bugs:

  - it didn't check for validity of id->eide_pio_modes and id->eide_pio_iordy
    before using them

  - it tried to found out maximum PIO mode basing on minimum IORDY cycle time
    (moreover wrong cycle times were used for PIO1/5)

  - it was overriding PIO blacklist and conservative PIO "downgrade" done
    by ide_get_best_pio_mode()

* use sis5513_tune_drive() instead of config_art_rwp_pio()
  in sis5513_config_xfer_rate() so the correct PIO mode is also set
  on drive even if the device is not IORDY/DMA capable

* config_art_rwp_pio() was always setting the best possible mode and not
  the wanted one - fix it and move ide_get_best_pio_mode() call to
  config_chipset_for_pio()

* don't use ide_find_best_mode() in config_chipset_for_pio(), it was being
  overriden by config_art_rwp_pio() for the host timings anyway + we need to
  set the same PIO mode on the device and the host

* pass correct "pio" argument (255 instead of 5) to sis5513_tune_drive() call
  in sis5513_config_xfer_rate() so the best PIO mode is set on the drive
  and not PIO4

* rename sis5513_tune_drive() to sis5513_tuneproc()
  and config_chipset_for_pio() to sis5513_tune_driver()

* bump driver version

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2007-05-16 00:51:42 +02:00
Родитель 9445de76c1
Коммит 6b8cf7724b
1 изменённых файлов: 36 добавлений и 49 удалений

Просмотреть файл

@ -1,9 +1,11 @@
/*
* linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003
* linux/drivers/ide/pci/sis5513.c Version 0.20 Mar 4, 2007
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
*
@ -448,36 +450,15 @@ static void config_drive_art_rwp (ide_drive_t *drive)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
}
/* Set per-drive active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 timing, drive_pci, test1, test2;
u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90};
u16 xfer_pio = drive->id->eide_pio_modes;
u8 drive_pci, test1, test2;
config_drive_art_rwp(drive);
pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
if (xfer_pio> 4)
xfer_pio = 0;
if (drive->id->eide_pio_iordy > 0) {
for (xfer_pio = 5;
(xfer_pio > 0) &&
(drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]);
xfer_pio--);
} else {
xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
(drive->id->eide_pio_modes & 2) ? 0x04 :
(drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio;
}
timing = (xfer_pio >= pio) ? xfer_pio : pio;
/* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
drive_pci = 0x40;
@ -500,17 +481,18 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
test1 &= ~0x0F;
test2 &= ~0x07;
switch(timing) {
switch(pio) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
case 3: test1 |= 0x03; test2 |= 0x03; break;
case 2: test1 |= 0x04; test2 |= 0x04; break;
case 1: test1 |= 0x07; test2 |= 0x06; break;
case 0: /* PIO0: register setting == X000 */
default: break;
}
pci_write_config_byte(dev, drive_pci, test1);
pci_write_config_byte(dev, drive_pci+1, test2);
} else if (chipset_family < ATA_133) {
switch(timing) { /* active recovery
switch(pio) { /* active recovery
v v */
case 4: test1 = 0x30|0x01; break;
case 3: test1 = 0x30|0x03; break;
@ -525,24 +507,28 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
pci_read_config_dword(dev, drive_pci, &test3);
test3 &= 0xc0c00fff;
if (test3 & 0x08) {
test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12;
test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16;
test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24;
test3 |= ini_time_value[ATA_133][pio] << 12;
test3 |= act_time_value[ATA_133][pio] << 16;
test3 |= rco_time_value[ATA_133][pio] << 24;
} else {
test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12;
test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16;
test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24;
test3 |= ini_time_value[ATA_100][pio] << 12;
test3 |= act_time_value[ATA_100][pio] << 16;
test3 |= rco_time_value[ATA_100][pio] << 24;
}
pci_write_config_dword(dev, drive_pci, test3);
}
}
static int config_chipset_for_pio (ide_drive_t *drive, u8 pio)
static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
{
if (pio == 255)
pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4));
return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
{
(void)sis5513_tune_drive(drive, pio);
}
static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
@ -622,25 +608,26 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
break;
case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
default: return((int) config_chipset_for_pio(drive, 0));
return sis5513_tune_drive(drive, speed - XFER_PIO_0);
default:
BUG();
break;
}
return ((int) ide_config_drive_speed(drive, speed));
}
static void sis5513_tune_drive (ide_drive_t *drive, u8 pio)
{
(void) config_chipset_for_pio(drive, pio);
return ide_config_drive_speed(drive, speed);
}
static int sis5513_config_xfer_rate(ide_drive_t *drive)
{
config_art_rwp_pio(drive, 5);
/*
* TODO: always set PIO mode and remove this
*/
sis5513_tuneproc(drive, 255);
drive->init_speed = 0;
@ -648,7 +635,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
sis5513_tune_drive(drive, 5);
sis5513_tuneproc(drive, 255);
return -1;
}
@ -836,7 +823,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->tuneproc = &sis5513_tune_drive;
hwif->tuneproc = &sis5513_tuneproc;
hwif->speedproc = &sis5513_tune_chipset;
if (!(hwif->dma_base)) {