hrtimer: Prevent all reprogramming if hang detected

If the last hrtimer interrupt detected a hang it sets hang_detected=1
and programs the clock event device with a delay to let the system
make progress.

If hang_detected == 1, we prevent reprogramming of the clock event
device in hrtimer_reprogram() but not in hrtimer_force_reprogram().

This can lead to the following situation:

hrtimer_interrupt()
   hang_detected = 1;
   program ce device to Xms from now (hang delay)

We have two timers pending:
   T1 expires 50ms from now
   T2 expires 5s from now

Now T1 gets canceled, which causes hrtimer_force_reprogram() to be
invoked, which in turn programs the clock event device to T2 (5
seconds from now).

Any hrtimer_start after that will not reprogram the hardware due to
hang_detected still being set. So we effectivly block all timers until
the T2 event fires and cleans up the hang situation.

Add a check for hang_detected to hrtimer_force_reprogram() which
prevents the reprogramming of the hang delay in the hardware
timer. The subsequent hrtimer_interrupt will resolve all outstanding
issues.

[ tglx: Rewrote subject and changelog and fixed up the comment in
  	hrtimer_force_reprogram() ]

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: http://lkml.kernel.org/r/53602DC6.2060101@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit is contained in:
Stuart Hayes 2014-04-29 17:55:02 -05:00 коммит произвёл Thomas Gleixner
Родитель fb0095da19
Коммит 6c6c0d5a1c
1 изменённых файлов: 17 добавлений и 0 удалений

Просмотреть файл

@ -569,6 +569,23 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
cpu_base->expires_next.tv64 = expires_next.tv64;
/*
* If a hang was detected in the last timer interrupt then we
* leave the hang delay active in the hardware. We want the
* system to make progress. That also prevents the following
* scenario:
* T1 expires 50ms from now
* T2 expires 5s from now
*
* T1 is removed, so this code is called and would reprogram
* the hardware to 5s from now. Any hrtimer_start after that
* will not reprogram the hardware due to hang_detected being
* set. So we'd effectivly block all timers until the T2 event
* fires.
*/
if (cpu_base->hang_detected)
return;
if (cpu_base->expires_next.tv64 != KTIME_MAX)
tick_program_event(cpu_base->expires_next, 1);
}